| .. |
|
include
|
…
|
|
|
Makefile
|
Ready for PW-x1 (#17)
|
2022-01-21 21:47:58 +09:00 |
|
am33xx-clocks.dtsi
|
arm: dts: sync am33xx-clocks with Linux 5.9-rc7
|
2021-02-22 11:39:48 +05:30 |
|
am33xx-l4.dtsi
|
arm: dts: sync am33xx gpio nodes with Linux 5.9-rc7
|
2021-02-16 10:30:11 +05:30 |
|
am33xx-u-boot.dtsi
|
arm: dts: am335x: enable scm_clocks auto binding
|
2021-01-12 10:58:05 +05:30 |
|
am33xx.dtsi
|
arm: dts: sync am33xx gpio nodes with Linux 5.9-rc7
|
2021-02-16 10:30:11 +05:30 |
|
am35xx-clocks.dtsi
|
…
|
|
|
am43x-epos-evm.dts
|
arm: dts: am437x: sync cpsw/mdio/phy with latest linux - drop phy_id
|
2019-11-03 09:15:46 -05:00 |
|
am43xx-clocks.dtsi
|
…
|
|
|
am57xx-beagle-x15-common.dtsi
|
ARM: dts: am57xx: Disable voltage switching for SD card
|
2019-07-26 22:24:11 -04:00 |
|
am57xx-beagle-x15-revb1.dts
|
ARM: dts: am57xx: Disable voltage switching for SD card
|
2019-07-26 22:24:11 -04:00 |
|
am57xx-beagle-x15-revc.dts
|
ARM: dts: am57xx: Disable voltage switching for SD card
|
2019-07-26 22:24:11 -04:00 |
|
am57xx-beagle-x15.dts
|
dts: am57xx-beagle-x15: disable UHS and HS200 support
|
2018-02-19 16:58:55 +09:00 |
|
am57xx-commercial-grade.dtsi
|
…
|
|
|
am57xx-idk-common-u-boot.dtsi
|
board: ti: am57xx-idk: Configure the CDCE913 clock synthesizer
|
2019-10-11 13:32:39 -04:00 |
|
am57xx-idk-common.dtsi
|
arm: dts: dra7: sync cpsw/mdio/phy with latest linux - drop phy_id
|
2019-11-03 09:15:46 -05:00 |
|
am57xx-industrial-grade.dtsi
|
…
|
|
|
am335x-baltos.dts
|
arm: dts: am335x: sync cpsw/mdio/phy with latest linux - drop phy_id
|
2019-11-03 09:15:46 -05:00 |
|
am335x-base0033.dts
|
am335x: igep003x: Add Device Tree Support and DM_MMC driver
|
2019-01-15 15:28:42 -05:00 |
|
am335x-bone-common.dtsi
|
arm: dts: am335x: sync cpsw/mdio/phy with latest linux - drop phy_id
|
2019-11-03 09:15:46 -05:00 |
|
am335x-bone.dts
|
…
|
|
|
am335x-boneblack.dts
|
…
|
|
|
am335x-bonegreen.dts
|
…
|
|
|
am335x-brppt1-mmc.dts
|
video: omap: add panel driver
|
2021-01-12 10:58:27 +05:30 |
|
am335x-brppt1-nand.dts
|
video: omap: add panel driver
|
2021-01-12 10:58:27 +05:30 |
|
am335x-brppt1-spi.dts
|
video: omap: add panel driver
|
2021-01-12 10:58:27 +05:30 |
|
am335x-brsmarc1.dts
|
video: omap: add panel driver
|
2021-01-12 10:58:27 +05:30 |
|
am335x-brxre1.dts
|
video: omap: add panel driver
|
2021-01-12 10:58:27 +05:30 |
|
am335x-chiliboard-u-boot.dtsi
|
arm: dts: am335x: include am33xx-u-boot.dtsi
|
2021-01-12 10:58:04 +05:30 |
|
am335x-chiliboard.dts
|
arm: dts: am335x: sync cpsw/mdio/phy with latest linux - drop phy_id
|
2019-11-03 09:15:46 -05:00 |
|
am335x-chilisom.dtsi
|
ARM: dts: am335x-chili*: add chiliSOM and chiliboard DTS files
|
2018-11-26 22:52:13 -05:00 |
|
am335x-draco.dts
|
arm: dts: am335x: sync cpsw/mdio/phy with latest linux - drop phy_id
|
2019-11-03 09:15:46 -05:00 |
|
am335x-draco.dtsi
|
arm: dts: sync am33xx with Linux 5.9-rc7
|
2021-01-12 10:58:04 +05:30 |
|
am335x-evm-u-boot.dtsi
|
video: omap: add panel driver
|
2021-01-12 10:58:27 +05:30 |
|
am335x-evm.dts
|
arm: dts: sync am33xx with Linux 5.9-rc7
|
2021-01-12 10:58:04 +05:30 |
|
am335x-evmsk-u-boot.dtsi
|
video: omap: add panel driver
|
2021-01-12 10:58:27 +05:30 |
|
am335x-evmsk.dts
|
arm: dts: sync am33xx with Linux 5.9-rc7
|
2021-01-12 10:58:04 +05:30 |
|
am335x-guardian-u-boot.dtsi
|
video: omap: add panel driver
|
2021-01-12 10:58:27 +05:30 |
|
am335x-guardian.dts
|
am335x, guardian: load env from NAND
|
2020-04-14 15:44:48 +05:30 |
|
am335x-icev2-u-boot.dtsi
|
arm: dts: am335x: include am33xx-u-boot.dtsi
|
2021-01-12 10:58:04 +05:30 |
|
am335x-icev2.dts
|
arm: dts: am335x-icev2: Add spi node
|
2020-09-15 18:51:53 +05:30 |
|
am335x-igep0033.dtsi
|
arm: dts: am335x: sync cpsw/mdio/phy with latest linux - drop phy_id
|
2019-11-03 09:15:46 -05:00 |
|
am335x-osd335x-common.dtsi
|
ti: Add device-tree for am335x-pocketbeagle.
|
2019-05-03 07:30:31 -04:00 |
|
am335x-pdu001-u-boot.dtsi
|
video: omap: add panel driver
|
2021-01-12 10:58:27 +05:30 |
|
am335x-pdu001.dts
|
arm: dts: am335x-pdu001: Sync with Linux 5.0-rc2
|
2019-01-18 13:40:35 -05:00 |
|
am335x-phycore-som.dtsi
|
ARM: am335x: Add phyCORE AM335x R2 support
|
2019-07-13 11:11:28 -04:00 |
|
am335x-pocketbeagle.dts
|
ti: Add device-tree for am335x-pocketbeagle.
|
2019-05-03 07:30:31 -04:00 |
|
am335x-pxm2.dtsi
|
arm: dts: sync am33xx with Linux 5.9-rc7
|
2021-01-12 10:58:04 +05:30 |
|
am335x-pxm50-u-boot.dtsi
|
video: omap: add panel driver
|
2021-01-12 10:58:27 +05:30 |
|
am335x-pxm50.dts
|
…
|
|
|
am335x-regor-rdk-u-boot.dtsi
|
arm: dts: am335x: include am33xx-u-boot.dtsi
|
2021-01-12 10:58:04 +05:30 |
|
am335x-regor-rdk.dts
|
ARM: am335x: Add phyBOARD REGOR support
|
2020-11-15 15:14:04 +05:30 |
|
am335x-regor.dtsi
|
ARM: am335x: Add phyBOARD REGOR support
|
2020-11-15 15:14:04 +05:30 |
|
am335x-rut-u-boot.dtsi
|
video: omap: add panel driver
|
2021-01-12 10:58:27 +05:30 |
|
am335x-rut.dts
|
arm: dts: sync am33xx with Linux 5.9-rc7
|
2021-01-12 10:58:04 +05:30 |
|
am335x-shc-u-boot.dtsi
|
arm: dts: am335x: include am33xx-u-boot.dtsi
|
2021-01-12 10:58:04 +05:30 |
|
am335x-shc.dts
|
arm: dts: sync am33xx with Linux 5.9-rc7
|
2021-01-12 10:58:04 +05:30 |
|
am335x-sl50.dts
|
arm: dts: am335x: sync cpsw/mdio/phy with latest linux - drop phy_id
|
2019-11-03 09:15:46 -05:00 |
|
am335x-wega-rdk-u-boot.dtsi
|
arm: dts: am335x: include am33xx-u-boot.dtsi
|
2021-01-12 10:58:04 +05:30 |
|
am335x-wega-rdk.dts
|
ARM: am335x: Add phyCORE AM335x R2 support
|
2019-07-13 11:11:28 -04:00 |
|
am335x-wega.dtsi
|
ARM: am335x: Add phyCORE AM335x R2 support
|
2019-07-13 11:11:28 -04:00 |
|
am437x-cm-t43.dts
|
arm: am437x: cm-t43: Add device tree, enable OF_CONTROL
|
2019-09-13 11:56:08 -04:00 |
|
am437x-gp-evm-u-boot.dtsi
|
arm: dts: am437x-gp-evm: Add some nodes to u-boot.dtsi
|
2020-02-13 21:39:17 +05:30 |
|
am437x-gp-evm.dts
|
arm: dts: am437x: sync cpsw/mdio/phy with latest linux - drop phy_id
|
2019-11-03 09:15:46 -05:00 |
|
am437x-idk-evm-u-boot.dtsi
|
board: ti: am43xx-idk: Configure the CDCE913 clock synthesizer
|
2019-10-11 13:32:39 -04:00 |
|
am437x-idk-evm.dts
|
arm: dts: am437x: sync cpsw/mdio/phy with latest linux - drop phy_id
|
2019-11-03 09:15:46 -05:00 |
|
am437x-sk-evm-u-boot.dtsi
|
dts: Add a u-boot specific dtsi file for the am4372
|
2018-12-14 17:59:09 +01:00 |
|
am437x-sk-evm.dts
|
arm: dts: am437x: sync cpsw/mdio/phy with latest linux - drop phy_id
|
2019-11-03 09:15:46 -05:00 |
|
am571x-idk-u-boot.dtsi
|
board: ti: am57xx-idk: Configure the CDCE913 clock synthesizer
|
2019-10-11 13:32:39 -04:00 |
|
am571x-idk.dts
|
ARM: dts: am57xx: Disable voltage switching for SD card
|
2019-07-26 22:24:11 -04:00 |
|
am572x-idk-common.dtsi
|
…
|
|
|
am572x-idk-u-boot.dtsi
|
board: ti: am57xx-idk: Configure the CDCE913 clock synthesizer
|
2019-10-11 13:32:39 -04:00 |
|
am572x-idk.dts
|
ARM: dts: am57xx: Disable voltage switching for SD card
|
2019-07-26 22:24:11 -04:00 |
|
am574x-idk-u-boot.dtsi
|
board: ti: am57xx-idk: Configure the CDCE913 clock synthesizer
|
2019-10-11 13:32:39 -04:00 |
|
am574x-idk.dts
|
ARM: dts: am574x-idk: Add pinmuxes for mmc1 and mmc2
|
2019-07-26 22:24:10 -04:00 |
|
am3517-evm-u-boot.dtsi
|
ARM: am3517-evm: Migrate to SPL_OF_CONTROL
|
2019-07-26 22:24:12 -04:00 |
|
am3517-evm-ui.dtsi
|
ARM: DTS: Resync am3517-evm.dts with Linux 4.20
|
2018-12-07 08:13:48 -05:00 |
|
am3517-evm.dts
|
ARM: DTS: Resync am3517-evm.dts with Linux 5.0-rc3
|
2019-02-01 09:14:21 -05:00 |
|
am3517-som.dtsi
|
ARM: DTS: Resync am3517-evm.dts with Linux 4.20
|
2018-12-07 08:13:48 -05:00 |
|
am3517-u-boot.dtsi
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
am3517.dtsi
|
ARM: DTS: Resync am3517-evm.dts with Linux 4.19
|
2018-11-16 13:34:37 -05:00 |
|
am4372-generic-u-boot.dtsi
|
dts: Add a u-boot specific dtsi file for the am4372
|
2018-12-14 17:59:09 +01:00 |
|
am4372-generic.dts
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
am4372-u-boot.dtsi
|
ARM: DTS: am43xx: Enable the DTS entries for USB port #2 in SPL
|
2019-02-01 09:14:21 -05:00 |
|
am4372.dtsi
|
arm: dts: am33xx: Sync dts with Linux 4.20.0
|
2018-12-07 08:13:51 -05:00 |
|
am5729-beagleboneai.dts
|
board: ti: beagleboneai: add dts file
|
2020-01-20 10:10:28 +05:30 |
|
armada-8k.dtsi
|
arm: armada: dts: Use a single dtsi for cp110 die description
|
2021-04-29 07:39:15 +02:00 |
|
armada-37xx.dtsi
|
arm: a37xx: pci: Increase PCIe MEM size from 16 MiB to 127 MiB
|
2021-06-04 11:32:41 +02:00 |
|
armada-38x-controlcenterdc.dts
|
dts: switch spi-flash to jedec, spi-nor compatible
|
2019-04-12 10:54:27 +05:30 |
|
armada-38x-solidrun-microsom.dtsi
|
arm: mvebu: solidrun: remove hardcoded DTS MAC address
|
2020-04-14 13:16:42 +02:00 |
|
armada-38x.dtsi
|
ARM: mvebu: sync Armada-38x dts with Linux 4.20
|
2019-01-21 11:39:49 +01:00 |
|
armada-370-xp.dtsi
|
arm: mvebu: armada-370-xp.dtsi: Add "u-boot, dm-pre-reloc" to "internal-regs"
|
2019-05-20 09:27:36 +02:00 |
|
armada-371x.dtsi
|
…
|
|
|
armada-372x.dtsi
|
…
|
|
|
armada-375-db.dts
|
…
|
|
|
armada-375.dtsi
|
arm: mvebu: armada-xp/37x.dtsi: Sync PCIe DT nodes with Linux v4.20
|
2019-02-05 14:22:49 +01:00 |
|
armada-380.dtsi
|
ARM: mvebu: sync Armada-38x dts with Linux 4.20
|
2019-01-21 11:39:49 +01:00 |
|
armada-385-atl-x530-u-boot.dtsi
|
arm: mvebu: x530: Enable watchdog in SPL and U-Boot
|
2019-04-12 07:04:18 +02:00 |
|
armada-385-atl-x530.dts
|
ARM: mvebu: add support for Allied Telesis x530
|
2019-01-21 11:39:50 +01:00 |
|
armada-385-atl-x530.dtsi
|
ARM: mvebu: add support for Allied Telesis x530
|
2019-01-21 11:39:50 +01:00 |
|
armada-385-atl-x530DP.dts
|
ARM: mvebu: add support for Allied Telesis x530
|
2019-01-21 11:39:50 +01:00 |
|
armada-385-atl-x530DP.dtsi
|
ARM: mvebu: add support for Allied Telesis x530
|
2019-01-21 11:39:50 +01:00 |
|
armada-385-db-88f6820-amc.dts
|
ARM: mvebu: sync db-88f6820-amc.dts with Linux v5.0
|
2019-04-12 07:20:20 +02:00 |
|
armada-385-turris-omnia-u-boot.dtsi
|
ARM: dts: armada-385-turris-omnia: rename node in -u-boot.dtsi file
|
2021-02-26 10:22:29 +01:00 |
|
armada-385-turris-omnia.dts
|
ARM: mvebu: use correct name for pcie controller
|
2019-03-19 09:22:05 +01:00 |
|
armada-385.dtsi
|
ARM: mvebu: sync Armada-38x dts with Linux 4.20
|
2019-01-21 11:39:49 +01:00 |
|
armada-388-clearfog-u-boot.dtsi
|
ARM: mvebu: clearfog: add EEPROM devices
|
2020-01-21 15:55:46 +01:00 |
|
armada-388-clearfog.dts
|
ARM: mvebu: clearfog: add EEPROM devices
|
2020-01-21 15:55:46 +01:00 |
|
armada-388-gp.dts
|
arm: mvebu: armada-388-gp.dts: Fix dtc warnings
|
2020-08-13 12:07:05 +02:00 |
|
armada-388-helios4-u-boot.dtsi
|
ARM: mvebu: helios4 dts changes to enable SPI
|
2021-01-27 07:25:39 +01:00 |
|
armada-388-helios4.dts
|
ARM: mvebu: helios4 dts changes to enable SPI
|
2021-01-27 07:25:39 +01:00 |
|
armada-388.dtsi
|
ARM: mvebu: sync Armada-38x dts with Linux 4.20
|
2019-01-21 11:39:49 +01:00 |
|
armada-3720-db.dts
|
phy: marvell: rename comphy related definitions to COMPHY_XX
|
2021-04-29 07:45:24 +02:00 |
|
armada-3720-espressobin.dts
|
phy: marvell: rename comphy related definitions to COMPHY_XX
|
2021-04-29 07:45:24 +02:00 |
|
armada-3720-turris-mox.dts
|
arm: mvebu: dts: turris_mox: add nodes for SPI NOR partitions
|
2021-06-10 07:18:06 +02:00 |
|
armada-3720-uDPU-u-boot.dtsi
|
arm64: mvebu: Use devicetree for SMBIOS settings on uDPU
|
2020-11-06 10:18:20 +08:00 |
|
armada-3720-uDPU.dts
|
arm: mvebu: armada-3720-uDPU.dts: Change back to phy-mode "2500base-x"
|
2021-05-20 13:05:31 +02:00 |
|
armada-7040-db-nand.dts
|
phy: marvell: rename comphy related definitions to COMPHY_XX
|
2021-04-29 07:45:24 +02:00 |
|
armada-7040-db.dts
|
phy: marvell: add support for SFI1
|
2021-04-29 07:45:24 +02:00 |
|
armada-7040.dtsi
|
arm: armada: dts: Add support for ap807-based platforms
|
2021-04-29 07:39:15 +02:00 |
|
armada-8040-clearfog-gt-8k.dts
|
phy: marvell: add support for SFI1
|
2021-04-29 07:45:24 +02:00 |
|
armada-8040-db.dts
|
phy: marvell: add support for SFI1
|
2021-04-29 07:45:24 +02:00 |
|
armada-8040-mcbin.dts
|
phy: marvell: add support for SFI1
|
2021-04-29 07:45:24 +02:00 |
|
armada-8040-puzzle-m801.dts
|
phy: marvell: add support for SFI1
|
2021-04-29 07:45:24 +02:00 |
|
armada-8040.dtsi
|
arm: armada: dts: Add support for ap807-based platforms
|
2021-04-29 07:39:15 +02:00 |
|
armada-ap80x-quad.dtsi
|
arm: armada: dts: Add support for ap807-based platforms
|
2021-04-29 07:39:15 +02:00 |
|
armada-ap80x.dtsi
|
arm: armada: dts: Add support for ap807-based platforms
|
2021-04-29 07:39:15 +02:00 |
|
armada-ap806.dtsi
|
arm: armada: dts: Add support for ap807-based platforms
|
2021-04-29 07:39:15 +02:00 |
|
armada-ap807.dtsi
|
arm: armada: dts: Add support for ap807-based platforms
|
2021-04-29 07:39:15 +02:00 |
|
armada-common.dtsi
|
arm: armada: dts: Use a single dtsi for cp110 die description
|
2021-04-29 07:39:15 +02:00 |
|
armada-cp110.dtsi
|
phy: marvell: fix pll initialization for second utmi port
|
2021-04-29 07:45:24 +02:00 |
|
armada-xp-98dx3236.dtsi
|
arm: mvebu: Add DB-XC3-24G4XG board
|
2019-04-12 07:04:18 +02:00 |
|
armada-xp-98dx3336.dtsi
|
arm: mvebu: Add DB-XC3-24G4XG board
|
2019-04-12 07:04:18 +02:00 |
|
armada-xp-98dx4251.dtsi
|
arm: mvebu: Add DB-XC3-24G4XG board
|
2019-04-12 07:04:18 +02:00 |
|
armada-xp-crs305-1g-4s-bit.dts
|
arm: mvebu: Add CRS305-1G-4S Bit board
|
2020-08-06 14:12:14 +02:00 |
|
armada-xp-crs305-1g-4s-u-boot.dtsi
|
arm: mvebu: Add CRS305-1G-4S board
|
2019-05-09 07:35:04 +02:00 |
|
armada-xp-crs305-1g-4s.dts
|
arm: mvebu: Convert CRS305-1G-4S board to CRS3xx-98DX3236
|
2020-05-27 07:03:17 +02:00 |
|
armada-xp-crs305-1g-4s.dtsi
|
arm: mvebu: Update CRS305-1G-4S board flash layout
|
2020-08-06 14:12:14 +02:00 |
|
armada-xp-crs326-24g-2s-bit.dts
|
arm: mvebu: Add CRS326-24G-2S board
|
2020-08-06 14:12:14 +02:00 |
|
armada-xp-crs326-24g-2s-u-boot.dtsi
|
arm: mvebu: Add CRS326-24G-2S board
|
2020-08-06 14:12:14 +02:00 |
|
armada-xp-crs326-24g-2s.dts
|
arm: mvebu: Add CRS326-24G-2S board
|
2020-08-06 14:12:14 +02:00 |
|
armada-xp-crs326-24g-2s.dtsi
|
arm: mvebu: Add CRS326-24G-2S board
|
2020-08-06 14:12:14 +02:00 |
|
armada-xp-crs328-4c-20s-4s-bit.dts
|
arm: mvebu: Add CRS328-4C-20S-4S board
|
2020-08-06 14:12:14 +02:00 |
|
armada-xp-crs328-4c-20s-4s-u-boot.dtsi
|
arm: mvebu: Add CRS328-4C-20S-4S board
|
2020-08-06 14:12:14 +02:00 |
|
armada-xp-crs328-4c-20s-4s.dts
|
arm: mvebu: Add CRS328-4C-20S-4S board
|
2020-08-06 14:12:14 +02:00 |
|
armada-xp-crs328-4c-20s-4s.dtsi
|
arm: mvebu: Add CRS328-4C-20S-4S board
|
2020-08-06 14:12:14 +02:00 |
|
armada-xp-db-xc3-24g4xg-u-boot.dtsi
|
arm: mvebu: Add DB-XC3-24G4XG board
|
2019-04-12 07:04:18 +02:00 |
|
armada-xp-db-xc3-24g4xg.dts
|
arm: mvebu: Add DB-XC3-24G4XG board
|
2019-04-12 07:04:18 +02:00 |
|
armada-xp-gp-u-boot.dtsi
|
arm: mvebu: Add armada-xp-gp-u-boot.dtsi for U-Boot properties
|
2020-12-28 09:42:06 +01:00 |
|
armada-xp-gp.dts
|
arm: mvebu: armada-xp-gp.dts: Add spi0 alias
|
2020-12-28 09:42:06 +01:00 |
|
armada-xp-maxbcm.dts
|
arm: mvebu: armada-xp-maxbcm.dts: Fix dtc warning
|
2020-08-13 12:07:05 +02:00 |
|
armada-xp-mv78230.dtsi
|
arm: sync armada-xp dts files from Linux 5.0
|
2019-04-12 07:04:18 +02:00 |
|
armada-xp-mv78260.dtsi
|
arm: sync armada-xp dts files from Linux 5.0
|
2019-04-12 07:04:18 +02:00 |
|
armada-xp-mv78460.dtsi
|
arm: sync armada-xp dts files from Linux 5.0
|
2019-04-12 07:04:18 +02:00 |
|
armada-xp-synology-ds414-u-boot.dtsi
|
arm: mvebu: ds414: add u-boot,dm-pre-reloc to spi0
|
2020-05-27 07:02:24 +02:00 |
|
armada-xp-synology-ds414.dts
|
arm: sync armada-xp dts files from Linux 5.0
|
2019-04-12 07:04:18 +02:00 |
|
armada-xp-theadorable.dts
|
arm: mvebu: armada-xp-theadorable.dts: Fix dtc warning
|
2020-08-13 12:07:05 +02:00 |
|
armada-xp.dtsi
|
arm: sync armada-xp dts files from Linux 5.0
|
2019-04-12 07:04:18 +02:00 |
|
armv7-m.dtsi
|
ARM: dts: sync armv7-m.dtsi with kernel v5.10-rc1
|
2020-11-25 10:29:23 +01:00 |
|
ast2500-evb.dts
|
ARM: dts: ast2500: Add SDHCI nodes
|
2019-09-05 15:27:31 +08:00 |
|
ast2500-u-boot.dtsi
|
reset: ast2500: Use SCU for reset control
|
2020-10-22 11:26:14 -04:00 |
|
ast2500.dtsi
|
aspeed: Update ast2500 SoC DTS file to Linux v4.17-rc6 level
|
2018-11-05 10:41:58 -06:00 |
|
ast2600-evb.dts
|
ARM: dts: aspeed: Add AST2600 SoC support
|
2021-01-18 15:23:06 -05:00 |
|
ast2600-u-boot.dtsi
|
ARM: dts: aspeed: Add AST2600 SoC support
|
2021-01-18 15:23:06 -05:00 |
|
ast2600.dtsi
|
ARM: dts: aspeed: Add AST2600 SoC support
|
2021-01-18 15:23:06 -05:00 |
|
at91-sama5d2_icp-u-boot.dtsi
|
board: atmel: add SAMA5D2 ICP board
|
2019-04-18 09:43:22 +03:00 |
|
at91-sama5d2_icp.dts
|
ARM: dts: at91: sama5d2_icp: fix i2c eeprom compatible
|
2020-12-11 17:47:21 +02:00 |
|
at91-sama5d2_ptc_ek.dts
|
ARM: dts: at91: sama5d2_ptc: add onewire connector for LCD eeprom
|
2018-09-28 20:22:43 -04:00 |
|
at91-sama5d2_xplained.dts
|
ARM: dts: at91: sama5d2_xplained: fix QSPI0 node
|
2019-07-09 09:26:43 +03:00 |
|
at91-sama5d3_xplained.dts
|
ARM: dts: at91: sama5d3_xplained: add onewire connector for LCD eeprom
|
2018-09-28 20:22:43 -04:00 |
|
at91-sama5d4_xplained.dts
|
dts: switch spi-flash to jedec, spi-nor compatible
|
2019-04-12 10:54:27 +05:30 |
|
at91-sama5d4ek.dts
|
dts: switch spi-flash to jedec, spi-nor compatible
|
2019-04-12 10:54:27 +05:30 |
|
at91-sama5d27_giantboard.dts
|
board: atmel: Add SAMA5D27 giant board
|
2021-01-22 15:09:59 +02:00 |
|
at91-sama5d27_som1_ek.dts
|
ARM: dts: at91: sama5d27_som1_ek: add onewire connector for LCD eeprom
|
2018-09-28 20:22:43 -04:00 |
|
at91-sama5d27_wlsom1_ek-u-boot.dtsi
|
ARM: dts: at91: sama5d27_wlsom1: add hlcdc node
|
2019-10-08 09:16:11 +03:00 |
|
at91-sama5d27_wlsom1_ek.dts
|
ARM: dts: at91: sama5d27_wlsom1: add hlcdc node
|
2019-10-08 09:16:11 +03:00 |
|
at91-vinco.dts
|
ARM: dts: at91: vinco: fix I2C warning bus unit address
|
2020-11-02 08:58:37 +02:00 |
|
at91sam9g15.dtsi
|
…
|
|
|
at91sam9g15ek.dts
|
…
|
|
|
at91sam9g20-taurus.dts
|
ARM: dts: at91: at91sam9g20-taurus: fix SPI bus unit address
|
2020-11-02 08:58:37 +02:00 |
|
at91sam9g20.dtsi
|
…
|
|
|
at91sam9g20ek.dts
|
…
|
|
|
at91sam9g20ek_2mmc.dts
|
…
|
|
|
at91sam9g20ek_common.dtsi
|
ARM: dts: at91: at91sam9g20ek_common: fix SPI bus unit address
|
2020-11-02 08:58:37 +02:00 |
|
at91sam9g25-gardena-smart-gateway-u-boot.dtsi
|
arm: at91: Add gardena-gateway-at91sam support
|
2019-04-09 09:28:50 +03:00 |
|
at91sam9g25-gardena-smart-gateway.dts
|
arm: at91: Add gardena-gateway-at91sam support
|
2019-04-09 09:28:50 +03:00 |
|
at91sam9g25.dtsi
|
…
|
|
|
at91sam9g25ek.dts
|
ARM: dts: at91: at91sam9g25ek: fix I2C bus unit address
|
2020-11-02 08:58:38 +02:00 |
|
at91sam9g35.dtsi
|
…
|
|
|
at91sam9g35ek.dts
|
…
|
|
|
at91sam9g45-corvus.dts
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
at91sam9g45-gurnard.dts
|
ARM: dts: at91: gurnard: fix SPI bus unit address
|
2020-11-02 08:58:38 +02:00 |
|
at91sam9g45.dtsi
|
at91: fix devicetree warnings
|
2018-09-10 20:48:18 -04:00 |
|
at91sam9m10g45ek.dts
|
…
|
|
|
at91sam9n12.dtsi
|
at91: fix devicetree warnings
|
2018-09-10 20:48:18 -04:00 |
|
at91sam9n12ek.dts
|
dts: switch spi-flash to jedec, spi-nor compatible
|
2019-04-12 10:54:27 +05:30 |
|
at91sam9rl.dtsi
|
at91: fix devicetree warnings
|
2018-09-10 20:48:18 -04:00 |
|
at91sam9rlek.dts
|
…
|
|
|
at91sam9x5.dtsi
|
arm: at91: at91sam9x5.dtsi: Add watchdog handle
|
2019-04-09 09:28:50 +03:00 |
|
at91sam9x5_can.dtsi
|
…
|
|
|
at91sam9x5_isi.dtsi
|
…
|
|
|
at91sam9x5_lcd.dtsi
|
…
|
|
|
at91sam9x5_macb0.dtsi
|
…
|
|
|
at91sam9x5_macb1.dtsi
|
…
|
|
|
at91sam9x5_usart3.dtsi
|
…
|
|
|
at91sam9x5cm.dtsi
|
…
|
|
|
at91sam9x5dm.dtsi
|
…
|
|
|
at91sam9x5ek.dtsi
|
dts: switch spi-flash to jedec, spi-nor compatible
|
2019-04-12 10:54:27 +05:30 |
|
at91sam9x25.dtsi
|
…
|
|
|
at91sam9x25ek.dts
|
…
|
|
|
at91sam9x35.dtsi
|
…
|
|
|
at91sam9x35ek.dts
|
…
|
|
|
at91sam9xe.dtsi
|
…
|
|
|
at91sam9260-smartweb.dts
|
arm: at91: wdt: Convert watchdog driver to dm/dt
|
2018-11-16 13:34:34 -05:00 |
|
at91sam9260.dtsi
|
at91sam9260.dtsi: add some labels
|
2019-04-15 17:18:59 +03:00 |
|
at91sam9260ek.dts
|
ARM: dts: at91: sam9260ek: fix SPI bus unit address
|
2020-11-02 08:58:38 +02:00 |
|
at91sam9261.dtsi
|
at91: fix devicetree warnings
|
2018-09-10 20:48:18 -04:00 |
|
at91sam9261ek.dts
|
ARM: dts: at91: at91sam9261ek: fix SPI unit address warning
|
2020-11-02 08:58:37 +02:00 |
|
at91sam9263.dtsi
|
at91: fix devicetree warnings
|
2018-09-10 20:48:18 -04:00 |
|
at91sam9263ek.dts
|
…
|
|
|
avnet-ultra96-rev1.dts
|
arm64: zynqmp: Update Copyright years to 2020
|
2020-04-06 12:51:31 +02:00 |
|
avnet-ultrazedev-cc-v1.0-ultrazedev-som-v1.0.dts
|
xilinx: Fix xlnx,mio_bank property
|
2020-08-20 09:49:20 +02:00 |
|
avnet-ultrazedev-som-v1.0.dtsi
|
xilinx: Fix xlnx,mio_bank property
|
2020-08-20 09:49:20 +02:00 |
|
axp22x.dtsi
|
…
|
|
|
axp81x.dtsi
|
ARM: dts: sun8i: Update A83T dts(i) files from Linux-v4.18-rc3
|
2018-08-13 13:07:35 +05:30 |
|
axp152.dtsi
|
…
|
|
|
axp209.dtsi
|
ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
axp223.dtsi
|
…
|
|
|
axp803.dtsi
|
sunxi: DT: A64: update device tree files
|
2020-11-17 00:42:20 +00:00 |
|
axp809.dtsi
|
…
|
|
|
bcm283x-rpi-lan7515.dtsi
|
fdt: update bcm283x device tree sources to Linux 5.1-rc6 state
|
2019-06-12 12:23:46 +02:00 |
|
bcm283x-rpi-smsc9512.dtsi
|
fdt: update bcm283x device tree sources to Linux 5.1-rc6 state
|
2019-06-12 12:23:46 +02:00 |
|
bcm283x-rpi-smsc9514.dtsi
|
…
|
|
|
bcm283x-rpi-usb-host.dtsi
|
…
|
|
|
bcm283x-rpi-usb-otg.dtsi
|
fdt: update bcm283x device tree sources to Linux 5.1-rc6 state
|
2019-06-12 12:23:46 +02:00 |
|
bcm283x-u-boot.dtsi
|
arm: dts: bcm283x: Allow UARTs to work before relocation
|
2020-05-12 10:59:12 +02:00 |
|
bcm283x.dtsi
|
fdt: update bcm283x device tree sources to Linux 5.1-rc6 state
|
2019-06-12 12:23:46 +02:00 |
|
bcm2835-rpi-a-plus.dts
|
fdt: update bcm283x device tree sources to Linux 5.1-rc6 state
|
2019-06-12 12:23:46 +02:00 |
|
bcm2835-rpi-a.dts
|
fdt: update bcm283x device tree sources to Linux 5.1-rc6 state
|
2019-06-12 12:23:46 +02:00 |
|
bcm2835-rpi-b-plus.dts
|
fdt: update bcm283x device tree sources to Linux 5.1-rc6 state
|
2019-06-12 12:23:46 +02:00 |
|
bcm2835-rpi-b-rev2.dts
|
fdt: update bcm283x device tree sources to Linux 5.1-rc6 state
|
2019-06-12 12:23:46 +02:00 |
|
bcm2835-rpi-b.dts
|
fdt: update bcm283x device tree sources to Linux 5.1-rc6 state
|
2019-06-12 12:23:46 +02:00 |
|
bcm2835-rpi-cm1-io1.dts
|
fdt: update bcm283x device tree sources to Linux 5.1-rc6 state
|
2019-06-12 12:23:46 +02:00 |
|
bcm2835-rpi-cm1.dtsi
|
fdt: update bcm283x device tree sources to Linux 5.1-rc6 state
|
2019-06-12 12:23:46 +02:00 |
|
bcm2835-rpi-zero-w.dts
|
fdt: update bcm283x device tree sources to Linux 5.1-rc6 state
|
2019-06-12 12:23:46 +02:00 |
|
bcm2835-rpi-zero.dts
|
fdt: update bcm283x device tree sources to Linux 5.1-rc6 state
|
2019-06-12 12:23:46 +02:00 |
|
bcm2835-rpi.dtsi
|
fdt: update bcm283x device tree sources to Linux 5.1-rc6 state
|
2019-06-12 12:23:46 +02:00 |
|
bcm2835.dtsi
|
fdt: update bcm283x device tree sources to Linux 5.1-rc6 state
|
2019-06-12 12:23:46 +02:00 |
|
bcm2836-rpi-2-b.dts
|
fdt: update bcm283x device tree sources to Linux 5.1-rc6 state
|
2019-06-12 12:23:46 +02:00 |
|
bcm2836-rpi.dtsi
|
fdt: update bcm283x device tree sources to Linux 5.1-rc6 state
|
2019-06-12 12:23:46 +02:00 |
|
bcm2836.dtsi
|
fdt: update bcm283x device tree sources to Linux 5.1-rc6 state
|
2019-06-12 12:23:46 +02:00 |
|
bcm2837-rpi-3-a-plus.dts
|
fdt: update bcm283x device tree sources to Linux 5.1-rc6 state
|
2019-06-12 12:23:46 +02:00 |
|
bcm2837-rpi-3-b-plus.dts
|
fdt: update bcm283x device tree sources to Linux 5.1-rc6 state
|
2019-06-12 12:23:46 +02:00 |
|
bcm2837-rpi-3-b.dts
|
fdt: update bcm283x device tree sources to Linux 5.1-rc6 state
|
2019-06-12 12:23:46 +02:00 |
|
bcm2837-rpi-cm3-io3.dts
|
fdt: update bcm283x device tree sources to Linux 5.1-rc6 state
|
2019-06-12 12:23:46 +02:00 |
|
bcm2837-rpi-cm3.dtsi
|
fdt: update bcm283x device tree sources to Linux 5.1-rc6 state
|
2019-06-12 12:23:46 +02:00 |
|
bcm2837.dtsi
|
fdt: update bcm283x device tree sources to Linux 5.1-rc6 state
|
2019-06-12 12:23:46 +02:00 |
|
bcm6858.dtsi
|
dt: bcm6858: add hsspi controller
|
2019-10-11 10:09:16 -04:00 |
|
bcm63158.dtsi
|
dt: bcm63158: Add hsspi controller
|
2019-10-11 10:09:16 -04:00 |
|
bcm68360.dtsi
|
bcm68360: add initial support
|
2020-01-23 07:29:58 -05:00 |
|
bcm963158.dts
|
dt: bcm963158: add a spi-nor device
|
2019-10-11 10:09:16 -04:00 |
|
bcm968360bg.dts
|
bcm968360bg: add initial support
|
2020-01-23 07:29:58 -05:00 |
|
bcm968580xref.dts
|
dt: bcm968580xref: add a spi-nor device
|
2019-10-11 10:09:16 -04:00 |
|
beacon-renesom-baseboard.dtsi
|
arm: dts: r8a774a1: Import DTS queued for Linux 5.12-rc1
|
2021-02-07 21:12:57 +01:00 |
|
beacon-renesom-som.dtsi
|
arm: dts: r8a774a1: Import DTS queued for Linux 5.12-rc1
|
2021-02-07 21:12:57 +01:00 |
|
bitmain-antminer-s9.dts
|
ARM: bitmain: Enable nand and smcc drivers
|
2021-03-30 12:03:25 +02:00 |
|
bubblegum_96.dts
|
arm: dts: bubblegum_96: Enable UART5 for serial console
|
2018-07-09 15:25:37 -04:00 |
|
ca-presidio-engboard.dts
|
board: presidio-asic: Add CAxxxx Ethernet support
|
2021-01-27 10:47:52 -05:00 |
|
cat875.dtsi
|
arm: rmobile: Add Silicon Linux EK874 board support
|
2021-03-16 20:09:29 +01:00 |
|
cn9130-crb-A.dts
|
phy: marvell: add support for SFI1
|
2021-04-29 07:45:24 +02:00 |
|
cn9130-crb-B.dts
|
phy: marvell: add support for SFI1
|
2021-04-29 07:45:24 +02:00 |
|
cn9130-crb.dtsi
|
arm: octeontx2: cn9130-crb.dtsi: Disable eth2 for now
|
2021-04-29 07:45:23 +02:00 |
|
cn9130-db-A.dts
|
arm: octeontx2: Add dtsi/dts files for Octeon TX2 CN913x DB
|
2021-05-16 06:48:45 +02:00 |
|
cn9130-db-B.dts
|
arm: octeontx2: Add dtsi/dts files for Octeon TX2 CN913x DB
|
2021-05-16 06:48:45 +02:00 |
|
cn9130-db-dev-info.dtsi
|
arm: octeontx2: Add dtsi/dts files for Octeon TX2 CN913x DB
|
2021-05-16 06:48:45 +02:00 |
|
cn9130-db.dtsi
|
arm: octeontx2: Add dtsi/dts files for Octeon TX2 CN913x DB
|
2021-05-16 06:48:45 +02:00 |
|
cn9130.dtsi
|
arm: octeontx2: Add dtsi/dts files for Octeon TX2 CN9130 CRB
|
2021-04-29 07:39:15 +02:00 |
|
cn9131-db-A.dts
|
arm: octeontx2: Add dtsi/dts files for Octeon TX2 CN913x DB
|
2021-05-16 06:48:45 +02:00 |
|
cn9131-db-B.dts
|
arm: octeontx2: Add dtsi/dts files for Octeon TX2 CN913x DB
|
2021-05-16 06:48:45 +02:00 |
|
cn9131-db.dtsi
|
arm: octeontx2: Add dtsi/dts files for Octeon TX2 CN913x DB
|
2021-05-16 06:48:45 +02:00 |
|
cn9132-db-A.dts
|
arm: octeontx2: Add dtsi/dts files for Octeon TX2 CN913x DB
|
2021-05-16 06:48:45 +02:00 |
|
cn9132-db-B.dts
|
arm: octeontx2: Add dtsi/dts files for Octeon TX2 CN913x DB
|
2021-05-16 06:48:45 +02:00 |
|
cn9132-db.dtsi
|
arm: octeontx2: Add dtsi/dts files for Octeon TX2 CN913x DB
|
2021-05-16 06:48:45 +02:00 |
|
cros-ec-keyboard.dtsi
|
arm64: dts: rk3399: Sync v5.7-rc1 from Linux
|
2020-05-01 18:32:56 +08:00 |
|
cros-ec-sbs.dtsi
|
arm64: dts: rk3399: Sync v5.7-rc1 from Linux
|
2020-05-01 18:32:56 +08:00 |
|
da850-evm-u-boot.dtsi
|
arm: dts: include gpio nodes for card detect
|
2020-07-09 22:00:29 -06:00 |
|
da850-evm.dts
|
ARM: dts: da850-evm: Re-sync with Kernel 5.0
|
2019-02-01 09:14:21 -05:00 |
|
da850-lcdk-u-boot.dtsi
|
arm: dts: include gpio nodes for card detect
|
2020-07-09 22:00:29 -06:00 |
|
da850-lcdk.dts
|
ARM: dts: da850-lcdk: Update DTS files for SPL device tree support
|
2020-01-20 10:10:28 +05:30 |
|
da850-lego-ev3.dts
|
ARM: legoev3: convert to driver model
|
2019-07-13 11:11:28 -04:00 |
|
da850.dtsi
|
ARM: dts: da850: Resync with Linux 5.1.9
|
2019-07-13 11:11:30 -04:00 |
|
dm816x-clocks.dtsi
|
…
|
|
|
dm816x.dtsi
|
arm: dts: am33xx: Sync dts with Linux 4.20.0
|
2018-12-07 08:13:51 -05:00 |
|
dm8168-evm-u-boot.dtsi
|
arm: dts: am335x: enable scm_clocks auto binding
|
2021-01-12 10:58:05 +05:30 |
|
dm8168-evm.dts
|
…
|
|
|
dra7-dspeve-thermal.dtsi
|
…
|
|
|
dra7-evm-common.dtsi
|
…
|
|
|
dra7-evm-u-boot.dtsi
|
ARM: dts: dra7: Add usb peripheral nodes in spl
|
2019-10-25 17:33:21 -04:00 |
|
dra7-evm.dts
|
arm: dts: dra7: sync cpsw/mdio/phy with latest linux - drop phy_id
|
2019-11-03 09:15:46 -05:00 |
|
dra7-iva-thermal.dtsi
|
…
|
|
|
dra7-mmc-iodelay.dtsi
|
ARM: dts: dra7-mmc-iodelay: Add a new pinctrl group for clk line without pullup
|
2019-07-26 22:24:10 -04:00 |
|
dra7.dtsi
|
ARM: dts: dra7: Change pbias voltage to 3.3V
|
2019-04-12 08:05:56 -04:00 |
|
dra7xx-clocks.dtsi
|
…
|
|
|
dra71-evm-u-boot.dtsi
|
ARM: dts: dra7: Add usb peripheral nodes in spl
|
2019-10-25 17:33:21 -04:00 |
|
dra71-evm.dts
|
arm: dts: dra7: sync cpsw/mdio/phy with latest linux - drop phy_id
|
2019-11-03 09:15:46 -05:00 |
|
dra72-evm-common.dtsi
|
…
|
|
|
dra72-evm-revc-u-boot.dtsi
|
ARM: dts: dra7: Add usb peripheral nodes in spl
|
2019-10-25 17:33:21 -04:00 |
|
dra72-evm-revc.dts
|
arm: dts: dra7: sync cpsw/mdio/phy with latest linux - drop phy_id
|
2019-11-03 09:15:46 -05:00 |
|
dra72-evm-tps65917.dtsi
|
…
|
|
|
dra72-evm-u-boot.dtsi
|
ARM: dts: dra7: Add usb peripheral nodes in spl
|
2019-10-25 17:33:21 -04:00 |
|
dra72-evm.dts
|
arm: dts: dra7: sync cpsw/mdio/phy with latest linux - drop phy_id
|
2019-11-03 09:15:46 -05:00 |
|
dra72x-mmc-iodelay.dtsi
|
…
|
|
|
dra72x.dtsi
|
…
|
|
|
dra74x-mmc-iodelay.dtsi
|
ARM: dts: dra74x: Fix iodelay configuration for mmc3
|
2019-09-13 11:56:30 -04:00 |
|
dra74x.dtsi
|
…
|
|
|
dra76-evm-u-boot.dtsi
|
ARM: dts: dra7: Add usb peripheral nodes in spl
|
2019-10-25 17:33:21 -04:00 |
|
dra76-evm.dts
|
arm: dts: dra7: sync cpsw/mdio/phy with latest linux - drop phy_id
|
2019-11-03 09:15:46 -05:00 |
|
dra76x-mmc-iodelay.dtsi
|
ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay values
|
2019-07-26 22:24:11 -04:00 |
|
dra76x.dtsi
|
…
|
|
|
dragonboard410c-uboot.dtsi
|
dts: db410: fix indentation
|
2019-01-18 09:16:15 -05:00 |
|
dragonboard410c.dts
|
dts: db410c: Add bindings for MSM USB phy
|
2018-09-30 13:00:36 -04:00 |
|
dragonboard820c-uboot.dtsi
|
dts: 820c: Add pinctrl node and uart mux
|
2019-01-25 12:12:56 -05:00 |
|
dragonboard820c.dts
|
dts: 820c: Add pinctrl node and uart mux
|
2019-01-25 12:12:56 -05:00 |
|
elpida_ecb240abacn.dtsi
|
omap4: Copy device tree from Linux 5.7.y
|
2020-06-16 17:00:12 +05:30 |
|
ethernut5.dts
|
…
|
|
|
ev-imx280-nano-x-mb.dts
|
Add EV-iMX280-NANO-X-MB board
|
2021-06-09 13:32:49 +02:00 |
|
exynos4.dtsi
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
exynos4x12-pinctrl-uboot.dtsi
|
arm: exynos4: fix warning of dts
|
2018-08-06 11:24:42 +09:00 |
|
exynos4x12-pinctrl.dtsi
|
…
|
|
|
exynos4x12.dtsi
|
…
|
|
|
exynos5.dtsi
|
arm: exynos5: fix warning of dts
|
2018-08-06 11:24:45 +09:00 |
|
exynos54xx-pinctrl-uboot.dtsi
|
arm: exynos5: fix warning of dts
|
2018-08-06 11:24:45 +09:00 |
|
exynos54xx-pinctrl.dtsi
|
…
|
|
|
exynos54xx.dtsi
|
dm: exynos: sound: Convert to use driver model
|
2018-12-13 16:36:30 -07:00 |
|
exynos4210-origen.dts
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
exynos4210-pinctrl-uboot.dtsi
|
arm: exynos4: fix warning of dts
|
2018-08-06 11:24:42 +09:00 |
|
exynos4210-pinctrl.dtsi
|
…
|
|
|
exynos4210-smdkv310.dts
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
exynos4210-trats.dts
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
exynos4210-universal_c210.dts
|
arm: exynos4: fix warning of dts
|
2018-08-06 11:24:42 +09:00 |
|
exynos4210.dtsi
|
…
|
|
|
exynos4412-odroid.dts
|
arm: dts: exynos: Use common alias for Odroid U3/X2 MMC2 (SD-card)
|
2020-01-23 11:43:10 +09:00 |
|
exynos4412-trats2.dts
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
exynos4412.dtsi
|
…
|
|
|
exynos5250-arndale.dts
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
exynos5250-pinctrl-uboot.dtsi
|
arm: exynos5: fix warning of dts
|
2018-08-06 11:24:45 +09:00 |
|
exynos5250-pinctrl.dtsi
|
…
|
|
|
exynos5250-smdk5250.dts
|
dm: exynos: sound: Convert to use driver model
|
2018-12-13 16:36:30 -07:00 |
|
exynos5250-snow.dts
|
dts: switch spi-flash to jedec, spi-nor compatible
|
2019-04-12 10:54:27 +05:30 |
|
exynos5250-spring.dts
|
dts: switch spi-flash to jedec, spi-nor compatible
|
2019-04-12 10:54:27 +05:30 |
|
exynos5250.dtsi
|
dm: exynos: sound: Convert to use driver model
|
2018-12-13 16:36:30 -07:00 |
|
exynos5420-peach-pit.dts
|
dts: switch spi-flash to jedec, spi-nor compatible
|
2019-04-12 10:54:27 +05:30 |
|
exynos5420-smdk5420.dts
|
dm: exynos: sound: Convert to use driver model
|
2018-12-13 16:36:30 -07:00 |
|
exynos5422-odroidxu3.dts
|
arm: dts: exynos: Extend board description
|
2020-01-23 11:41:49 +09:00 |
|
exynos5800-peach-pi.dts
|
dm: exynos: sound: Convert to use driver model
|
2018-12-13 16:36:30 -07:00 |
|
exynos7420-espresso7420.dts
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
exynos7420.dtsi
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
fsl-imx8-ca35.dtsi
|
arm: dts: i.mx8x: add #cooling-cells properties
|
2020-01-20 15:38:16 +01:00 |
|
fsl-imx8-ca53.dtsi
|
imx: imx8mq: add dtsi file
|
2018-02-04 12:00:58 +01:00 |
|
fsl-imx8dx.dtsi
|
imx8: Replace SC_R_LAST with SC_R_NONE in DTB
|
2020-05-10 20:55:20 +02:00 |
|
fsl-imx8dxp.dtsi
|
arm: dts: introduce dtsi for i.MX8QXP
|
2018-10-22 13:00:09 +02:00 |
|
fsl-imx8qm-apalis-u-boot.dtsi
|
ARM: dts: imx8qm-apalis: dm-pre-proper for pd_dma nodes
|
2020-04-07 10:41:07 +02:00 |
|
fsl-imx8qm-apalis.dts
|
board: toradex: move RGMII delays to PHY side
|
2021-03-01 10:21:36 +01:00 |
|
fsl-imx8qm-mek-u-boot.dtsi
|
ARM: dts: imx8m: add UHS or HS400/HS400ES properties
|
2020-12-26 12:36:35 +01:00 |
|
fsl-imx8qm-mek.dts
|
imx: support i.MX8QM MEK board
|
2019-04-25 17:03:25 +02:00 |
|
fsl-imx8qm.dtsi
|
arm: dts: imx: fsl-imx8qm.dtsi: fix gpio aliases
|
2020-06-23 00:08:53 +02:00 |
|
fsl-imx8qxp-ai_ml-u-boot.dtsi
|
arm: dts: Add devicetree support for iMXQXP AI_ML board
|
2019-11-03 17:04:16 +01:00 |
|
fsl-imx8qxp-ai_ml.dts
|
arm: dts: Add devicetree support for iMXQXP AI_ML board
|
2019-11-03 17:04:16 +01:00 |
|
fsl-imx8qxp-apalis-u-boot.dtsi
|
ARM: dts: fsl-imx8qxp-apalis: add initial device tree
|
2020-12-06 15:31:37 +01:00 |
|
fsl-imx8qxp-apalis.dts
|
board: toradex: move RGMII delays to PHY side
|
2021-03-01 10:21:36 +01:00 |
|
fsl-imx8qxp-colibri-u-boot.dtsi
|
ARM: dts: imx8qxp-colibri: dm-pre-proper for pd_dma nodes
|
2020-04-07 10:41:10 +02:00 |
|
fsl-imx8qxp-colibri.dts
|
colibri-imx8qxp: rename all occurences to colibri-imx8x
|
2020-09-17 14:41:26 +02:00 |
|
fsl-imx8qxp-mek-u-boot.dtsi
|
ARM: dts: imx8m: add UHS or HS400/HS400ES properties
|
2020-12-26 12:36:35 +01:00 |
|
fsl-imx8qxp-mek.dts
|
dts: imx8qxp-mek: Add PHY post reset delay
|
2019-04-08 15:24:39 +02:00 |
|
fsl-imx8qxp.dtsi
|
arm: dts: introduce dtsi for i.MX8QXP
|
2018-10-22 13:00:09 +02:00 |
|
fsl-ls1012a-2g5rdb.dts
|
treewide: Update fsl qspi node dt properties as per spi-mem driver
|
2020-05-19 09:22:05 +05:30 |
|
fsl-ls1012a-frdm.dts
|
SPDX: Convert all of our multiple license tags to Linux Kernel style
|
2018-05-07 10:24:31 -04:00 |
|
fsl-ls1012a-frdm.dtsi
|
treewide: Update fsl qspi node dt properties as per spi-mem driver
|
2020-05-19 09:22:05 +05:30 |
|
fsl-ls1012a-frwy.dts
|
dts: switch spi-flash to jedec, spi-nor compatible
|
2019-04-12 10:54:27 +05:30 |
|
fsl-ls1012a-qds.dts
|
SPDX: Convert all of our multiple license tags to Linux Kernel style
|
2018-05-07 10:24:31 -04:00 |
|
fsl-ls1012a-qds.dtsi
|
treewide: Update fsl qspi node dt properties as per spi-mem driver
|
2020-05-19 09:22:05 +05:30 |
|
fsl-ls1012a-rdb.dts
|
SPDX: Convert all of our multiple license tags to Linux Kernel style
|
2018-05-07 10:24:31 -04:00 |
|
fsl-ls1012a-rdb.dtsi
|
treewide: Update fsl qspi node dt properties as per spi-mem driver
|
2020-05-19 09:22:05 +05:30 |
|
fsl-ls1012a.dtsi
|
arm64: dts: ls1012a: add gpio node
|
2021-02-08 14:01:19 +05:30 |
|
fsl-ls1028a-kontron-sl28-u-boot.dtsi
|
board: sl28: add config to enable console output on SER0
|
2021-04-15 14:22:22 +05:30 |
|
fsl-ls1028a-kontron-sl28-var1-u-boot.dtsi
|
board: sl28: add network variant 1 support
|
2021-02-08 14:01:15 +05:30 |
|
fsl-ls1028a-kontron-sl28-var1.dts
|
board: sl28: fix RGMII clock and voltage
|
2021-06-16 18:14:08 +05:30 |
|
fsl-ls1028a-kontron-sl28-var2-u-boot.dtsi
|
board: sl28: add network variant 2 support
|
2021-02-08 14:01:16 +05:30 |
|
fsl-ls1028a-kontron-sl28-var2.dts
|
board: sl28: add network variant 2 support
|
2021-02-08 14:01:16 +05:30 |
|
fsl-ls1028a-kontron-sl28-var3-u-boot.dtsi
|
board: sl28: move ethernet aliases to variant specific dtsi
|
2021-02-08 14:01:15 +05:30 |
|
fsl-ls1028a-kontron-sl28-var3.dts
|
board: kontron: add sl28 support
|
2020-10-23 16:52:09 +05:30 |
|
fsl-ls1028a-kontron-sl28-var4-u-boot.dtsi
|
board: sl28: move ethernet aliases to variant specific dtsi
|
2021-02-08 14:01:15 +05:30 |
|
fsl-ls1028a-kontron-sl28-var4.dts
|
board: sl28: fix RGMII clock and voltage
|
2021-06-16 18:14:08 +05:30 |
|
fsl-ls1028a-kontron-sl28.dts
|
board: sl28: add SATA support
|
2021-02-08 14:01:16 +05:30 |
|
fsl-ls1028a-qds-1xxx-sch-30842.dtsi
|
arm: dts: ls1028a: define QDS networking protocol combinations
|
2021-04-15 14:22:17 +05:30 |
|
fsl-ls1028a-qds-6xxx-sch-30842.dtsi
|
arm: dts: ls1028a: define QDS networking protocol combinations
|
2021-04-15 14:22:17 +05:30 |
|
fsl-ls1028a-qds-7xx7-sch-30841R.dtsi
|
arm: dts: ls1028a: define QDS networking protocol combinations
|
2021-04-15 14:22:17 +05:30 |
|
fsl-ls1028a-qds-8xxx-sch-24801.dtsi
|
arm: dts: ls1028a: define QDS networking protocol combinations
|
2021-04-15 14:22:17 +05:30 |
|
fsl-ls1028a-qds-7777-sch-30841.dtsi
|
arm: dts: ls1028a: define QDS networking protocol combinations
|
2021-04-15 14:22:17 +05:30 |
|
fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi
|
arm: dts: ls1028a: define QDS networking protocol combinations
|
2021-04-15 14:22:17 +05:30 |
|
fsl-ls1028a-qds-9999-sch-24801.dtsi
|
arm: dts: ls1028a: define QDS networking protocol combinations
|
2021-04-15 14:22:17 +05:30 |
|
fsl-ls1028a-qds-duart.dts
|
armv8: ls1028aqds: add lpuart dts support
|
2020-04-29 11:10:54 +05:30 |
|
fsl-ls1028a-qds-lpuart.dts
|
armv8: ls1028aqds: add lpuart dts support
|
2020-04-29 11:10:54 +05:30 |
|
fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi
|
arm: dts: ls1028a: define QDS networking protocol combinations
|
2021-04-15 14:22:17 +05:30 |
|
fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi
|
arm: dts: ls1028a: define QDS networking protocol combinations
|
2021-04-15 14:22:17 +05:30 |
|
fsl-ls1028a-qds-x7xx-sch-30842.dtsi
|
arm: dts: ls1028a: define QDS networking protocol combinations
|
2021-04-15 14:22:17 +05:30 |
|
fsl-ls1028a-qds-xx7x-sch-30842.dtsi
|
arm: dts: ls1028a: define QDS networking protocol combinations
|
2021-04-15 14:22:17 +05:30 |
|
fsl-ls1028a-qds.dtsi
|
arm: dts: ls1028a: define QDS networking protocol combinations
|
2021-04-15 14:22:17 +05:30 |
|
fsl-ls1028a-rdb.dts
|
net: use the same alias stem for ethernet as linux
|
2021-06-18 11:29:17 +03:00 |
|
fsl-ls1028a.dtsi
|
arm: dts: ls1028a: Add Ethernet switch node and dependencies
|
2021-02-16 12:38:36 -05:00 |
|
fsl-ls1043-post.dtsi
|
ARM: dts: add QorIQ DPAA 1 FMan v3 for LS1043A
|
2020-04-29 11:10:54 +05:30 |
|
fsl-ls1043a-qds-duart.dts
|
SPDX: Convert all of our multiple license tags to Linux Kernel style
|
2018-05-07 10:24:31 -04:00 |
|
fsl-ls1043a-qds-lpuart.dts
|
SPDX: Convert all of our multiple license tags to Linux Kernel style
|
2018-05-07 10:24:31 -04:00 |
|
fsl-ls1043a-qds.dtsi
|
treewide: Update fsl qspi node dt properties as per spi-mem driver
|
2020-05-19 09:22:05 +05:30 |
|
fsl-ls1043a-rdb.dts
|
ARM: dts: add QorIQ DPAA 1 FMan v3 to LS1043ARDB
|
2020-04-29 11:10:54 +05:30 |
|
fsl-ls1043a.dtsi
|
arm64: dts: ls1043a: add gpio node
|
2021-02-08 14:01:20 +05:30 |
|
fsl-ls1046-post.dtsi
|
ARM: dts: add QorIQ DPAA 1 FMan v3 for LS1046A
|
2020-04-29 11:10:54 +05:30 |
|
fsl-ls1046a-frwy.dts
|
treewide: Update fsl qspi node dt properties as per spi-mem driver
|
2020-05-19 09:22:05 +05:30 |
|
fsl-ls1046a-qds-duart.dts
|
SPDX: Convert all of our multiple license tags to Linux Kernel style
|
2018-05-07 10:24:31 -04:00 |
|
fsl-ls1046a-qds-lpuart.dts
|
SPDX: Convert all of our multiple license tags to Linux Kernel style
|
2018-05-07 10:24:31 -04:00 |
|
fsl-ls1046a-qds.dtsi
|
treewide: Update fsl qspi node dt properties as per spi-mem driver
|
2020-05-19 09:22:05 +05:30 |
|
fsl-ls1046a-rdb.dts
|
treewide: Update fsl qspi node dt properties as per spi-mem driver
|
2020-05-19 09:22:05 +05:30 |
|
fsl-ls1046a.dtsi
|
arm64: dts: ls1046a: add gpio node
|
2021-02-08 14:01:20 +05:30 |
|
fsl-ls1088a-qds-21-x.dts
|
arm: dts: ls1088aqds: add CONFIG_MULTI_DTB_FIT support
|
2020-05-19 09:22:08 +05:30 |
|
fsl-ls1088a-qds-29-x.dts
|
arm: dts: ls1088aqds: add CONFIG_MULTI_DTB_FIT support
|
2020-05-19 09:22:08 +05:30 |
|
fsl-ls1088a-qds-sd1-21.dtsi
|
arm: dts: ls1088aqds: add CONFIG_MULTI_DTB_FIT support
|
2020-05-19 09:22:08 +05:30 |
|
fsl-ls1088a-qds-sd1-29.dtsi
|
arm: dts: ls1088aqds: add CONFIG_MULTI_DTB_FIT support
|
2020-05-19 09:22:08 +05:30 |
|
fsl-ls1088a-qds.dts
|
arm: dts: ls1088aqds: add CONFIG_MULTI_DTB_FIT support
|
2020-05-19 09:22:08 +05:30 |
|
fsl-ls1088a-qds.dtsi
|
arm: dts: ls1088aqds: add CONFIG_MULTI_DTB_FIT support
|
2020-05-19 09:22:08 +05:30 |
|
fsl-ls1088a-rdb.dts
|
treewide: Update fsl qspi node dt properties as per spi-mem driver
|
2020-05-19 09:22:05 +05:30 |
|
fsl-ls1088a.dtsi
|
arm64: dts: ls1088a: add gpio node
|
2021-02-08 14:01:20 +05:30 |
|
fsl-ls2080a-qds-42-x.dts
|
arm: dts: ls2080aqds: add CONFIG_MULTI_DTB_FIT support
|
2020-05-19 09:22:08 +05:30 |
|
fsl-ls2080a-qds-sd1-42.dtsi
|
arm: dts: ls2080aqds: add CONFIG_MULTI_DTB_FIT support
|
2020-05-19 09:22:08 +05:30 |
|
fsl-ls2080a-qds.dts
|
arm: dts: ls2080aqds: add CONFIG_MULTI_DTB_FIT support
|
2020-05-19 09:22:08 +05:30 |
|
fsl-ls2080a-qds.dtsi
|
arm: dts: ls2080aqds: add CONFIG_MULTI_DTB_FIT support
|
2020-05-19 09:22:08 +05:30 |
|
fsl-ls2080a-rdb.dts
|
dts: switch spi-flash to jedec, spi-nor compatible
|
2019-04-12 10:54:27 +05:30 |
|
fsl-ls2080a.dtsi
|
arm64: dts: ls208xa: add gpio node
|
2021-02-08 14:01:20 +05:30 |
|
fsl-ls2081a-rdb.dts
|
dts: switch spi-flash to jedec, spi-nor compatible
|
2019-04-12 10:54:27 +05:30 |
|
fsl-ls2088a-rdb-qspi.dts
|
treewide: Update fsl qspi node dt properties as per spi-mem driver
|
2020-05-19 09:22:05 +05:30 |
|
fsl-lx2160a-qds-3-11-x.dts
|
arm: dts: lx2160aqds: add nodes describing possible mezzanine cards
|
2020-05-19 09:22:07 +05:30 |
|
fsl-lx2160a-qds-3-x-x.dts
|
arm: dts: lx2160aqds: add nodes describing possible mezzanine cards
|
2020-05-19 09:22:07 +05:30 |
|
fsl-lx2160a-qds-7-11-x.dts
|
arm: dts: lx2160aqds: add nodes describing possible mezzanine cards
|
2020-05-19 09:22:07 +05:30 |
|
fsl-lx2160a-qds-7-x-x.dts
|
arm: dts: lx2160aqds: add nodes describing possible mezzanine cards
|
2020-05-19 09:22:07 +05:30 |
|
fsl-lx2160a-qds-19-11-x.dts
|
arm: dts: lx2160aqds: add nodes describing possible mezzanine cards
|
2020-05-19 09:22:07 +05:30 |
|
fsl-lx2160a-qds-19-x-x.dts
|
arm: dts: lx2160aqds: add nodes describing possible mezzanine cards
|
2020-05-19 09:22:07 +05:30 |
|
fsl-lx2160a-qds-20-11-x.dts
|
arm: dts: lx2160aqds: add nodes describing possible mezzanine cards
|
2020-05-19 09:22:07 +05:30 |
|
fsl-lx2160a-qds-20-x-x.dts
|
arm: dts: lx2160aqds: add nodes describing possible mezzanine cards
|
2020-05-19 09:22:07 +05:30 |
|
fsl-lx2160a-qds-sd1-3.dtsi
|
arm: dts: lx2160aqds: add nodes describing possible mezzanine cards
|
2020-05-19 09:22:07 +05:30 |
|
fsl-lx2160a-qds-sd1-7.dtsi
|
arm: dts: lx2160aqds: add nodes describing possible mezzanine cards
|
2020-05-19 09:22:07 +05:30 |
|
fsl-lx2160a-qds-sd1-19.dtsi
|
arm: dts: lx2160aqds: add nodes describing possible mezzanine cards
|
2020-05-19 09:22:07 +05:30 |
|
fsl-lx2160a-qds-sd1-20.dtsi
|
arm: dts: lx2160aqds: add nodes describing possible mezzanine cards
|
2020-05-19 09:22:07 +05:30 |
|
fsl-lx2160a-qds-sd2-11.dtsi
|
arm: dts: lx2160aqds: add nodes describing possible mezzanine cards
|
2020-05-19 09:22:07 +05:30 |
|
fsl-lx2160a-qds.dts
|
armv8: lx2162aqds: Add support for LX2162AQDS platform
|
2020-12-10 13:56:39 +05:30 |
|
fsl-lx2160a-qds.dtsi
|
armv8: lx2162aqds: Add support for LX2162AQDS platform
|
2020-12-10 13:56:39 +05:30 |
|
fsl-lx2160a-rdb.dts
|
arm: dts: lx2160ardb: support eMMC HS400 mode
|
2020-10-12 15:47:07 +08:00 |
|
fsl-lx2160a.dtsi
|
arm: dts: lx2160a: add label to pcie nodes in dts
|
2020-12-10 13:56:38 +05:30 |
|
fsl-lx2162a-qds-17-x.dts
|
armv8: lx2162aqds: Add support for LX2162AQDS platform
|
2020-12-10 13:56:39 +05:30 |
|
fsl-lx2162a-qds-18-x.dts
|
armv8: lx2162aqds: Add support for LX2162AQDS platform
|
2020-12-10 13:56:39 +05:30 |
|
fsl-lx2162a-qds-20-x.dts
|
armv8: lx2162aqds: Add support for LX2162AQDS platform
|
2020-12-10 13:56:39 +05:30 |
|
fsl-lx2162a-qds-sd1-17.dtsi
|
arm: dts: lx2162aqds: support eMMC HS400 mode on esdhc1
|
2021-06-17 11:46:11 +05:30 |
|
fsl-lx2162a-qds-sd1-18.dtsi
|
arm: dts: lx2162aqds: support eMMC HS400 mode on esdhc1
|
2021-06-17 11:46:11 +05:30 |
|
fsl-lx2162a-qds-sd1-20.dtsi
|
arm: dts: lx2162aqds: support eMMC HS400 mode on esdhc1
|
2021-06-17 11:46:11 +05:30 |
|
fsl-lx2162a-qds.dts
|
arm: dts: lx2162aqds: support eMMC HS400 mode on esdhc1
|
2021-06-17 11:46:11 +05:30 |
|
fsl-sch-24801.dtsi
|
arm: dts: ls1028a: define QDS networking protocol combinations
|
2021-04-15 14:22:17 +05:30 |
|
fsl-sch-28021.dtsi
|
arm: dts: ls1028a: define QDS networking protocol combinations
|
2021-04-15 14:22:17 +05:30 |
|
fsl-sch-30841.dtsi
|
arm: dts: ls1028a: define QDS networking protocol combinations
|
2021-04-15 14:22:17 +05:30 |
|
fsl-sch-30842.dtsi
|
arm: dts: ls1028a: define QDS networking protocol combinations
|
2021-04-15 14:22:17 +05:30 |
|
hi3660-hikey960-u-boot.dtsi
|
arm: dts: Add devicetree for Hikey960 board
|
2019-08-11 16:43:41 -04:00 |
|
hi3660-hikey960.dts
|
arm: dts: Add devicetree for Hikey960 board
|
2019-08-11 16:43:41 -04:00 |
|
hi3660.dtsi
|
arm: dts: Import HI3660 devicetree from Linux
|
2019-08-11 16:43:41 -04:00 |
|
hi3798cv200-poplar.dts
|
arm64: dt: poplar: add optee node
|
2019-01-26 08:13:54 -05:00 |
|
hi3798cv200-u-boot.dtsi
|
poplar: enable Ethernet driver support
|
2019-04-23 17:57:25 -04:00 |
|
hi3798cv200.dtsi
|
poplar: sync up device tree with kernel 4.20
|
2019-01-25 12:12:56 -05:00 |
|
hi6220-hikey-u-boot.dtsi
|
arm: dts: Add MMC nodes for HiKey board
|
2019-01-15 15:28:21 -05:00 |
|
hi6220-hikey.dts
|
arm: dts: Add MMC nodes for HiKey board
|
2019-01-15 15:28:21 -05:00 |
|
hi6220.dtsi
|
arm: dts: Add MMC nodes for HiKey board
|
2019-01-15 15:28:21 -05:00 |
|
hihope-common.dtsi
|
arm: dts: rmobile: r8a774a1: Synchronize DTs with Linux 5.10
|
2021-01-31 14:08:45 +01:00 |
|
hihope-rev4.dtsi
|
arm: dts: rmobile: r8a774a1: Synchronize DTs with Linux 5.10
|
2021-01-31 14:08:45 +01:00 |
|
hihope-rzg2-ex.dtsi
|
arm: dts: rmobile: r8a774a1: Synchronize DTs with Linux 5.10
|
2021-01-31 14:08:45 +01:00 |
|
hikey960-pinctrl.dtsi
|
arm: dts: Import HI3660 devicetree from Linux
|
2019-08-11 16:43:41 -04:00 |
|
imx6-apalis.dts
|
ARM: dts: imx6_apalis: introduce fec node
|
2020-01-07 10:26:56 +01:00 |
|
imx6-colibri.dts
|
ARM: dts: imx6_colibri: introduce fec node
|
2020-01-07 10:26:56 +01:00 |
|
imx6-logicpd-baseboard.dtsi
|
ARM: DTS: imx6q-logicpd: Resync with Linux 5.1
|
2019-06-05 12:14:02 -04:00 |
|
imx6-logicpd-som.dtsi
|
ARM: DTS: imx6q-logicpd: Resync with Linux 5.1
|
2019-06-05 12:14:02 -04:00 |
|
imx6dl-aristainetos2_7.dtsi
|
imx6: remove not longer supported aristainetos boards
|
2020-12-06 15:06:16 +01:00 |
|
imx6dl-aristainetos2c_7-u-boot.dtsi
|
imx6: aristainetos: add support for rev C board
|
2020-01-07 10:26:56 +01:00 |
|
imx6dl-aristainetos2c_7.dts
|
arm: dts: aristainetos: sync with changes in linux
|
2020-12-06 15:07:35 +01:00 |
|
imx6dl-aristainetos2c_cslb_7-u-boot.dtsi
|
imx6: add support for aristainetos2c_cslb board variant
|
2020-12-06 15:07:06 +01:00 |
|
imx6dl-aristainetos2c_cslb_7.dts
|
arm: dts: aristainetos: sync with changes in linux
|
2020-12-06 15:07:35 +01:00 |
|
imx6dl-b1x5v2.dts
|
board: ge: b1x5v2: Add GE B1x5v2 and B1x5Pv2
|
2020-11-01 16:01:40 +01:00 |
|
imx6dl-brppt2.dts
|
board/BuR/brppt2: initial commit
|
2019-11-03 21:17:55 +01:00 |
|
imx6dl-cubox-i-emmc-som-v15.dts
|
arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2)
|
2020-01-07 10:26:56 +01:00 |
|
imx6dl-cubox-i-som-v15.dts
|
arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2)
|
2020-01-07 10:26:56 +01:00 |
|
imx6dl-cubox-i.dts
|
arm: dts: hummingboard: add cubox/hummingboard DT (part 1 of 2)
|
2020-01-07 10:26:56 +01:00 |
|
imx6dl-dhcom-pdk2-u-boot.dtsi
|
ARM: imx6: DHCOM i.MX6 PDK: Convert to DM_ETH
|
2020-04-18 13:00:07 +02:00 |
|
imx6dl-dhcom-pdk2.dts
|
ARM: dts: imx: dh-imx6: Add DHCOM iMX6 Duallite PDK2 device tree
|
2019-07-19 20:32:24 +02:00 |
|
imx6dl-gw51xx.dts
|
imx: ventana: add Gateworks Ventana dts
|
2021-04-08 20:29:53 +02:00 |
|
imx6dl-gw52xx.dts
|
imx: ventana: add Gateworks Ventana dts
|
2021-04-08 20:29:53 +02:00 |
|
imx6dl-gw53xx.dts
|
imx: ventana: add Gateworks Ventana dts
|
2021-04-08 20:29:53 +02:00 |
|
imx6dl-gw54xx.dts
|
imx: ventana: add Gateworks Ventana dts
|
2021-04-08 20:29:53 +02:00 |
|
imx6dl-gw551x.dts
|
imx: ventana: add Gateworks Ventana dts
|
2021-04-08 20:29:53 +02:00 |
|
imx6dl-gw552x.dts
|
imx: ventana: add Gateworks Ventana dts
|
2021-04-08 20:29:53 +02:00 |
|
imx6dl-gw553x.dts
|
imx: ventana: add Gateworks Ventana dts
|
2021-04-08 20:29:53 +02:00 |
|
imx6dl-gw560x.dts
|
imx: ventana: add Gateworks Ventana dts
|
2021-04-08 20:29:53 +02:00 |
|
imx6dl-gw5903.dts
|
imx: ventana: add Gateworks Ventana dts
|
2021-04-08 20:29:53 +02:00 |
|
imx6dl-gw5904.dts
|
imx: ventana: add Gateworks Ventana dts
|
2021-04-08 20:29:53 +02:00 |
|
imx6dl-gw5907.dts
|
imx: ventana: add Gateworks Ventana dts
|
2021-04-08 20:29:53 +02:00 |
|
imx6dl-gw5910.dts
|
imx: ventana: add Gateworks Ventana dts
|
2021-04-08 20:29:53 +02:00 |
|
imx6dl-gw5912.dts
|
imx: ventana: add Gateworks Ventana dts
|
2021-04-08 20:29:53 +02:00 |
|
imx6dl-gw5913.dts
|
imx: ventana: add Gateworks Ventana dts
|
2021-04-08 20:29:53 +02:00 |
|
imx6dl-hummingboard-emmc-som-v15.dts
|
arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2)
|
2020-01-07 10:26:56 +01:00 |
|
imx6dl-hummingboard-som-v15.dts
|
arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2)
|
2020-01-07 10:26:56 +01:00 |
|
imx6dl-hummingboard.dts
|
arm: dts: hummingboard: add cubox/hummingboard DT (part 1 of 2)
|
2020-01-07 10:26:56 +01:00 |
|
imx6dl-hummingboard2-emmc-som-v15-u-boot.dtsi
|
arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2)
|
2020-01-07 10:26:56 +01:00 |
|
imx6dl-hummingboard2-emmc-som-v15.dts
|
arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2)
|
2020-01-07 10:26:56 +01:00 |
|
imx6dl-hummingboard2-som-v15.dts
|
arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2)
|
2020-01-07 10:26:56 +01:00 |
|
imx6dl-hummingboard2.dts
|
arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2)
|
2020-01-07 10:26:56 +01:00 |
|
imx6dl-icore-mipi-u-boot.dtsi
|
Fixup various SPDX tags from the latest merge
|
2018-05-18 17:56:50 -04:00 |
|
imx6dl-icore-mipi.dts
|
ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL
|
2020-01-07 10:26:57 +01:00 |
|
imx6dl-icore-rqs-u-boot.dtsi
|
Fixup various SPDX tags from the latest merge
|
2018-05-18 17:56:50 -04:00 |
|
imx6dl-icore-rqs.dts
|
ARM: dts: icorem6: Sync engicam device trees from v5.4
|
2020-01-07 10:26:57 +01:00 |
|
imx6dl-icore-u-boot.dtsi
|
Fixup various SPDX tags from the latest merge
|
2018-05-18 17:56:50 -04:00 |
|
imx6dl-icore.dts
|
ARM: dts: icorem6: Sync engicam device trees from v5.4
|
2020-01-07 10:26:57 +01:00 |
|
imx6dl-mamoj-u-boot.dtsi
|
Fixup various SPDX tags from the latest merge
|
2018-05-18 17:56:50 -04:00 |
|
imx6dl-mamoj.dts
|
i.MX6DL: mamoj: Add PFUZE100 support
|
2018-05-18 08:23:43 +02:00 |
|
imx6dl-mba6.dtsi
|
arm: dt: imx6qdl: add tqma6[qdl] som on mba6 mainboard
|
2020-04-17 18:57:55 +02:00 |
|
imx6dl-mba6a.dts
|
arm: dt: imx6qdl: add tqma6[qdl] som on mba6 mainboard
|
2020-04-17 18:57:55 +02:00 |
|
imx6dl-mba6b.dts
|
arm: dt: imx6qdl: add tqma6[qdl] som on mba6 mainboard
|
2020-04-17 18:57:55 +02:00 |
|
imx6dl-nitrogen6x.dts
|
nitrogen6x: migrate to using device tree
|
2019-10-08 16:35:16 +02:00 |
|
imx6dl-pico.dts
|
pico-imx6: Add initial support
|
2019-10-08 16:35:59 +02:00 |
|
imx6dl-pinfunc.h
|
…
|
|
|
imx6dl-riotboard-u-boot.dtsi
|
ARM: embestmx6boards: convert the mars/riot boards to DM_MMC
|
2021-04-08 20:29:54 +02:00 |
|
imx6dl-riotboard.dts
|
ARM: embestmx6boards: Import the marsboard/riotboard. dts files
|
2021-04-08 20:29:54 +02:00 |
|
imx6dl-sabreauto-u-boot.dtsi
|
arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files
|
2019-02-15 22:01:15 +01:00 |
|
imx6dl-sabreauto.dts
|
arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd]
|
2019-02-15 22:01:15 +01:00 |
|
imx6dl-sabresd-u-boot.dtsi
|
arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files
|
2019-02-15 22:01:15 +01:00 |
|
imx6dl-sabresd.dts
|
arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd]
|
2019-02-15 22:01:15 +01:00 |
|
imx6dl-tqma6a.dtsi
|
arm: dt: imx6qdl: add tqma6[qdl] som on mba6 mainboard
|
2020-04-17 18:57:55 +02:00 |
|
imx6dl-tqma6b.dtsi
|
arm: dt: imx6qdl: add tqma6[qdl] som on mba6 mainboard
|
2020-04-17 18:57:55 +02:00 |
|
imx6dl-udoo.dts
|
ARM: board: udoo: Import UDOO dts files
|
2021-04-08 20:29:54 +02:00 |
|
imx6dl-wandboard-revd1.dts
|
wandboard: Fix version detection for mx6q/mx6dl revD1
|
2020-04-18 12:59:23 +02:00 |
|
imx6dl.dtsi
|
arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd]
|
2019-02-15 22:01:15 +01:00 |
|
imx6q-b450v3.dts
|
board: ge: bx50v3: override panel
|
2020-02-09 21:47:20 +01:00 |
|
imx6q-b650v3.dts
|
board: ge: bx50v3: override panel
|
2020-02-09 21:47:20 +01:00 |
|
imx6q-b850v3.dts
|
board: ge: bx50v3: override panel
|
2020-02-09 21:47:20 +01:00 |
|
imx6q-ba16.dtsi
|
board: ge: bx50v3: cleanup phy config
|
2020-12-26 14:56:09 +01:00 |
|
imx6q-bx50v3-uboot.dtsi
|
board: ge: bx50v3: add phy reset GPIO
|
2021-05-02 12:46:54 +02:00 |
|
imx6q-bx50v3.dts
|
board: ge: bx50v3: sync devicetrees from Linux
|
2020-01-07 10:26:56 +01:00 |
|
imx6q-bx50v3.dtsi
|
board: ge: bx50v3, imx53ppd: add eeprom partitions
|
2020-02-09 21:47:20 +01:00 |
|
imx6q-cm-fx6.dts
|
…
|
|
|
imx6q-cubox-i-emmc-som-v15.dts
|
arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2)
|
2020-01-07 10:26:56 +01:00 |
|
imx6q-cubox-i-som-v15.dts
|
arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2)
|
2020-01-07 10:26:56 +01:00 |
|
imx6q-cubox-i.dts
|
arm: dts: hummingboard: add cubox/hummingboard DT (part 1 of 2)
|
2020-01-07 10:26:56 +01:00 |
|
imx6q-dhcom-pdk2-u-boot.dtsi
|
ARM: imx6: DHCOM i.MX6 PDK: Convert to DM_ETH
|
2020-04-18 13:00:07 +02:00 |
|
imx6q-dhcom-pdk2.dts
|
ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite
|
2019-07-19 20:32:24 +02:00 |
|
imx6q-display5-u-boot.dtsi
|
DM: WDT: Convert WDT driver to use DM/DTS (including SYSRESET)
|
2019-10-08 16:35:59 +02:00 |
|
imx6q-display5.dts
|
DTS: imx: Add display5 board (imx6q based) device tree description (v5.1)
|
2019-07-19 20:14:50 +02:00 |
|
imx6q-gw51xx.dts
|
imx: ventana: add Gateworks Ventana dts
|
2021-04-08 20:29:53 +02:00 |
|
imx6q-gw52xx.dts
|
imx: ventana: add Gateworks Ventana dts
|
2021-04-08 20:29:53 +02:00 |
|
imx6q-gw53xx.dts
|
imx: ventana: add Gateworks Ventana dts
|
2021-04-08 20:29:53 +02:00 |
|
imx6q-gw54xx.dts
|
imx: ventana: add Gateworks Ventana dts
|
2021-04-08 20:29:53 +02:00 |
|
imx6q-gw551x.dts
|
imx: ventana: add Gateworks Ventana dts
|
2021-04-08 20:29:53 +02:00 |
|
imx6q-gw552x.dts
|
imx: ventana: add Gateworks Ventana dts
|
2021-04-08 20:29:53 +02:00 |
|
imx6q-gw553x.dts
|
imx: ventana: add Gateworks Ventana dts
|
2021-04-08 20:29:53 +02:00 |
|
imx6q-gw560x.dts
|
imx: ventana: add Gateworks Ventana dts
|
2021-04-08 20:29:53 +02:00 |
|
imx6q-gw5903.dts
|
imx: ventana: add Gateworks Ventana dts
|
2021-04-08 20:29:53 +02:00 |
|
imx6q-gw5904.dts
|
imx: ventana: add Gateworks Ventana dts
|
2021-04-08 20:29:53 +02:00 |
|
imx6q-gw5907.dts
|
imx: ventana: add Gateworks Ventana dts
|
2021-04-08 20:29:53 +02:00 |
|
imx6q-gw5910.dts
|
imx: ventana: add Gateworks Ventana dts
|
2021-04-08 20:29:53 +02:00 |
|
imx6q-gw5912.dts
|
imx: ventana: add Gateworks Ventana dts
|
2021-04-08 20:29:53 +02:00 |
|
imx6q-gw5913.dts
|
imx: ventana: add Gateworks Ventana dts
|
2021-04-08 20:29:53 +02:00 |
|
imx6q-hummingboard-emmc-som-v15.dts
|
arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2)
|
2020-01-07 10:26:56 +01:00 |
|
imx6q-hummingboard-som-v15.dts
|
arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2)
|
2020-01-07 10:26:56 +01:00 |
|
imx6q-hummingboard.dts
|
arm: dts: hummingboard: add cubox/hummingboard DT (part 1 of 2)
|
2020-01-07 10:26:56 +01:00 |
|
imx6q-hummingboard2-emmc-som-v15-u-boot.dtsi
|
arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2)
|
2020-01-07 10:26:56 +01:00 |
|
imx6q-hummingboard2-emmc-som-v15.dts
|
arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2)
|
2020-01-07 10:26:56 +01:00 |
|
imx6q-hummingboard2-som-v15.dts
|
arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2)
|
2020-01-07 10:26:56 +01:00 |
|
imx6q-hummingboard2.dts
|
arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2)
|
2020-01-07 10:26:56 +01:00 |
|
imx6q-icore-mipi-u-boot.dtsi
|
Fixup various SPDX tags from the latest merge
|
2018-05-18 17:56:50 -04:00 |
|
imx6q-icore-mipi.dts
|
ARM: dts: icorem6: Sync engicam device trees from v5.4
|
2020-01-07 10:26:57 +01:00 |
|
imx6q-icore-ofcap10.dts
|
ARM: dts: icorem6: Sync engicam device trees from v5.4
|
2020-01-07 10:26:57 +01:00 |
|
imx6q-icore-ofcap12.dts
|
ARM: dts: icorem6: Sync engicam device trees from v5.4
|
2020-01-07 10:26:57 +01:00 |
|
imx6q-icore-rqs-u-boot.dtsi
|
Fixup various SPDX tags from the latest merge
|
2018-05-18 17:56:50 -04:00 |
|
imx6q-icore-rqs.dts
|
ARM: dts: icorem6: Sync engicam device trees from v5.4
|
2020-01-07 10:26:57 +01:00 |
|
imx6q-icore-u-boot.dtsi
|
Fixup various SPDX tags from the latest merge
|
2018-05-18 17:56:50 -04:00 |
|
imx6q-icore.dts
|
ARM: dts: icorem6: Sync engicam device trees from v5.4
|
2020-01-07 10:26:57 +01:00 |
|
imx6q-kp-u-boot.dtsi
|
imx: dts: Add u-boot specific set of device tree properties for tpc70
|
2019-10-13 22:49:11 +02:00 |
|
imx6q-kp.dts
|
imx: Enable RTC (ds1307) support in the U-Boot proper on TPC70 board
|
2019-11-03 17:04:16 +01:00 |
|
imx6q-logicpd-u-boot.dtsi
|
ARM: imx6q_logic: Enable Pin muxing in SPL
|
2019-10-13 22:49:11 +02:00 |
|
imx6q-logicpd.dts
|
ARM: DTS: imx6q-logicpd: Resync with Linux 5.1
|
2019-06-05 12:14:02 -04:00 |
|
imx6q-marsboard-u-boot.dtsi
|
ARM: embestmx6boards: convert the mars/riot boards to DM_MMC
|
2021-04-08 20:29:54 +02:00 |
|
imx6q-marsboard.dts
|
ARM: embestmx6boards: Import the marsboard/riotboard. dts files
|
2021-04-08 20:29:54 +02:00 |
|
imx6q-mba6.dtsi
|
arm: dt: imx6qdl: add tqma6[qdl] som on mba6 mainboard
|
2020-04-17 18:57:55 +02:00 |
|
imx6q-mba6a.dts
|
arm: dt: imx6qdl: add tqma6[qdl] som on mba6 mainboard
|
2020-04-17 18:57:55 +02:00 |
|
imx6q-mba6b.dts
|
arm: dt: imx6qdl: add tqma6[qdl] som on mba6 mainboard
|
2020-04-17 18:57:55 +02:00 |
|
imx6q-mccmon6.dts
|
ARM: imx: Convert mccmon6 to use DM/DTS in the u-boot proper
|
2019-11-03 17:04:16 +01:00 |
|
imx6q-nitrogen6x.dts
|
nitrogen6x: migrate to using device tree
|
2019-10-08 16:35:16 +02:00 |
|
imx6q-novena.dts
|
ARM: imx: novena: Convert block devices to DM
|
2019-06-11 10:42:48 +02:00 |
|
imx6q-phytec-mira-rdk-nand-u-boot.dtsi
|
ARM: pcm058: Match mainline Linux NAND ECC layout/behaviour
|
2021-04-08 23:59:50 +02:00 |
|
imx6q-phytec-mira-rdk-nand.dts
|
arm: dts: imx6q: Add Linux dts files for Phytec Mira
|
2020-07-14 11:46:04 +02:00 |
|
imx6q-pico.dts
|
pico-imx6: Add initial support
|
2019-10-08 16:35:59 +02:00 |
|
imx6q-pinfunc.h
|
…
|
|
|
imx6q-sabreauto-u-boot.dtsi
|
arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files
|
2019-02-15 22:01:15 +01:00 |
|
imx6q-sabreauto.dts
|
arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd]
|
2019-02-15 22:01:15 +01:00 |
|
imx6q-sabrelite.dts
|
nitrogen6x: migrate to using device tree
|
2019-10-08 16:35:16 +02:00 |
|
imx6q-sabresd-u-boot.dtsi
|
arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files
|
2019-02-15 22:01:15 +01:00 |
|
imx6q-sabresd.dts
|
arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd]
|
2019-02-15 22:01:15 +01:00 |
|
imx6q-tbs2910.dts
|
ARM: dts: imx6q-tbs2910: Fix Ethernet regression
|
2020-06-25 10:39:48 -04:00 |
|
imx6q-tqma6a.dtsi
|
arm: dt: imx6qdl: add tqma6[qdl] som on mba6 mainboard
|
2020-04-17 18:57:55 +02:00 |
|
imx6q-tqma6b.dtsi
|
arm: dt: imx6qdl: add tqma6[qdl] som on mba6 mainboard
|
2020-04-17 18:57:55 +02:00 |
|
imx6q-udoo.dts
|
ARM: board: udoo: Import UDOO dts files
|
2021-04-08 20:29:54 +02:00 |
|
imx6q-wandboard-revd1.dts
|
wandboard: Fix version detection for mx6q/mx6dl revD1
|
2020-04-18 12:59:23 +02:00 |
|
imx6q.dtsi
|
imx: mx6sabresd: fix boot hang with video
|
2019-05-20 11:58:01 +02:00 |
|
imx6qdl-aristainetos2-common.dtsi
|
imx6: remove not longer supported aristainetos boards
|
2020-12-06 15:06:16 +01:00 |
|
imx6qdl-aristainetos2-u-boot.dtsi
|
imx6: remove not longer supported aristainetos boards
|
2020-12-06 15:06:16 +01:00 |
|
imx6qdl-aristainetos2c-u-boot.dtsi
|
imx6: aristainetos: add support for rev C board
|
2020-01-07 10:26:56 +01:00 |
|
imx6qdl-aristainetos2c.dtsi
|
imx6: remove not longer supported aristainetos boards
|
2020-12-06 15:06:16 +01:00 |
|
imx6qdl-aristainetos2c_cslb-u-boot.dtsi
|
imx6: add support for aristainetos2c_cslb board variant
|
2020-12-06 15:07:06 +01:00 |
|
imx6qdl-aristainetos2c_cslb.dtsi
|
imx6: add support for aristainetos2c_cslb board variant
|
2020-12-06 15:07:06 +01:00 |
|
imx6qdl-cubox-i.dtsi
|
arm: dts: hummingboard: add cubox/hummingboard DT (part 1 of 2)
|
2020-01-07 10:26:56 +01:00 |
|
imx6qdl-dhcom-pdk2-u-boot.dtsi
|
ARM: imx6: DHCOM i.MX6 PDK: Fix usb-otg VBUS regulator
|
2020-04-18 13:00:35 +02:00 |
|
imx6qdl-dhcom-pdk2.dtsi
|
ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite
|
2019-07-19 20:32:24 +02:00 |
|
imx6qdl-dhcom-u-boot.dtsi
|
ARM: imx6: DHCOM i.MX6 PDK: Fix usb-otg VBUS regulator
|
2020-04-18 13:00:35 +02:00 |
|
imx6qdl-dhcom.dtsi
|
ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite
|
2019-07-19 20:32:24 +02:00 |
|
imx6qdl-gw51xx.dtsi
|
imx: ventana: enable dm support for PCI and FEC ethernet
|
2021-06-09 13:33:35 +02:00 |
|
imx6qdl-gw52xx.dtsi
|
imx: ventana: enable dm support for PCI and FEC ethernet
|
2021-06-09 13:33:35 +02:00 |
|
imx6qdl-gw53xx.dtsi
|
imx: ventana: enable dm support for PCI and FEC ethernet
|
2021-06-09 13:33:35 +02:00 |
|
imx6qdl-gw54xx.dtsi
|
imx: ventana: enable dm support for PCI and FEC ethernet
|
2021-06-09 13:33:35 +02:00 |
|
imx6qdl-gw551x.dtsi
|
arm: dts: imx6qdl-gw*: add dr_mode prop to dt to avoid error
|
2021-04-08 20:29:53 +02:00 |
|
imx6qdl-gw552x.dtsi
|
arm: dts: imx6qdl-gw552x.dtsi: fix VBUS supply
|
2021-05-02 12:46:54 +02:00 |
|
imx6qdl-gw553x.dtsi
|
arm: dts: imx6qdl-gw*: add dr_mode prop to dt to avoid error
|
2021-04-08 20:29:53 +02:00 |
|
imx6qdl-gw560x.dtsi
|
imx: ventana: enable dm support for PCI and FEC ethernet
|
2021-06-09 13:33:35 +02:00 |
|
imx6qdl-gw5903.dtsi
|
imx: ventana: enable dm support for PCI and FEC ethernet
|
2021-06-09 13:33:35 +02:00 |
|
imx6qdl-gw5904.dtsi
|
imx: ventana: enable dm support for PCI and FEC ethernet
|
2021-06-09 13:33:35 +02:00 |
|
imx6qdl-gw5907.dtsi
|
imx: ventana: enable dm support for PCI and FEC ethernet
|
2021-06-09 13:33:35 +02:00 |
|
imx6qdl-gw5910.dtsi
|
imx: ventana: enable dm support for PCI and FEC ethernet
|
2021-06-09 13:33:35 +02:00 |
|
imx6qdl-gw5912.dtsi
|
imx: ventana: enable dm support for PCI and FEC ethernet
|
2021-06-09 13:33:35 +02:00 |
|
imx6qdl-gw5913.dtsi
|
imx: ventana: enable dm support for PCI and FEC ethernet
|
2021-06-09 13:33:35 +02:00 |
|
imx6qdl-hummingboard.dtsi
|
arm: dts: hummingboard: add cubox/hummingboard DT (part 1 of 2)
|
2020-01-07 10:26:56 +01:00 |
|
imx6qdl-hummingboard2-emmc-som-v15-u-boot.dtsi
|
mx6cuboxi: enable MMC and eMMC in DT for SPL
|
2020-06-23 00:08:53 +02:00 |
|
imx6qdl-hummingboard2-emmc.dtsi
|
arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2)
|
2020-01-07 10:26:56 +01:00 |
|
imx6qdl-hummingboard2.dtsi
|
arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2)
|
2020-01-07 10:26:56 +01:00 |
|
imx6qdl-icore-1.5.dtsi
|
ARM: dts: imx6qdl-icore-1.5: Remove duplicate phy reset methods
|
2020-01-07 10:26:57 +01:00 |
|
imx6qdl-icore-rqs-u-boot.dtsi
|
Fixup various SPDX tags from the latest merge
|
2018-05-18 17:56:50 -04:00 |
|
imx6qdl-icore-rqs.dtsi
|
ARM: dts: icorem6: Sync engicam device trees from v5.4
|
2020-01-07 10:26:57 +01:00 |
|
imx6qdl-icore-u-boot.dtsi
|
Fixup various SPDX tags from the latest merge
|
2018-05-18 17:56:50 -04:00 |
|
imx6qdl-icore.dtsi
|
ARM: dts: icorem6: Sync engicam device trees from v5.4
|
2020-01-07 10:26:57 +01:00 |
|
imx6qdl-mba6.dtsi
|
arm: dt: imx6qdl: add tqma6[qdl] som on mba6 mainboard
|
2020-04-17 18:57:55 +02:00 |
|
imx6qdl-mba6a.dtsi
|
arm: dt: imx6qdl: add tqma6[qdl] som on mba6 mainboard
|
2020-04-17 18:57:55 +02:00 |
|
imx6qdl-mba6b.dtsi
|
arm: dt: imx6qdl: add tqma6[qdl] som on mba6 mainboard
|
2020-04-17 18:57:55 +02:00 |
|
imx6qdl-nitrogen6x.dtsi
|
nitrogen6x: migrate to using device tree
|
2019-10-08 16:35:16 +02:00 |
|
imx6qdl-phytec-mira.dtsi
|
arm: dts: imx6q: Add Linux dts files for Phytec Mira
|
2020-07-14 11:46:04 +02:00 |
|
imx6qdl-phytec-phycore-som.dtsi
|
arm: dts: imx6q: Add Linux dts files for Phytec Mira
|
2020-07-14 11:46:04 +02:00 |
|
imx6qdl-pico.dtsi
|
pico-imx6: Add initial support
|
2019-10-08 16:35:59 +02:00 |
|
imx6qdl-sabreauto-u-boot.dtsi
|
arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files
|
2019-02-15 22:01:15 +01:00 |
|
imx6qdl-sabreauto.dtsi
|
ARM: dts: imx6qdl-sabreauto: Fix AR8031 phy-mode
|
2020-06-22 17:41:13 +02:00 |
|
imx6qdl-sabrelite.dtsi
|
nitrogen6x: migrate to using device tree
|
2019-10-08 16:35:16 +02:00 |
|
imx6qdl-sabresd-u-boot.dtsi
|
arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files
|
2019-02-15 22:01:15 +01:00 |
|
imx6qdl-sabresd.dtsi
|
ARM: dts: imx6qdl-sabresd: Fix AR8031 phy-mode
|
2020-06-22 17:41:25 +02:00 |
|
imx6qdl-sr-som-brcm.dtsi
|
arm: dts: hummingboard: add cubox/hummingboard DT (part 1 of 2)
|
2020-01-07 10:26:56 +01:00 |
|
imx6qdl-sr-som-emmc.dtsi
|
arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2)
|
2020-01-07 10:26:56 +01:00 |
|
imx6qdl-sr-som-ti.dtsi
|
arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2)
|
2020-01-07 10:26:56 +01:00 |
|
imx6qdl-sr-som.dtsi
|
ARM: dts: imx6qdl-sr-som: Sync with kernel 5.8-rc1
|
2020-06-22 17:40:56 +02:00 |
|
imx6qdl-tqma6.dtsi
|
arm: dt: imx6qdl: add tqma6[qdl] som on mba6 mainboard
|
2020-04-17 18:57:55 +02:00 |
|
imx6qdl-tqma6a.dtsi
|
arm: dt: imx6qdl: add tqma6[qdl] som on mba6 mainboard
|
2020-04-17 18:57:55 +02:00 |
|
imx6qdl-tqma6b.dtsi
|
arm: dt: imx6qdl: add tqma6[qdl] som on mba6 mainboard
|
2020-04-17 18:57:55 +02:00 |
|
imx6qdl-u-boot.dtsi
|
imx: imx6qdl: dtsi: move U-Boot specific change to u-boot.dtsi
|
2019-10-08 16:35:58 +02:00 |
|
imx6qdl-udoo-u-boot.dtsi
|
ARM: imx: udoo: Convert block devices to DM
|
2021-04-08 20:29:54 +02:00 |
|
imx6qdl-udoo.dtsi
|
ARM: board: udoo: Import UDOO dts files
|
2021-04-08 20:29:54 +02:00 |
|
imx6qdl-wandboard-revb1.dtsi
|
wandboard: Sync with devicetree files from kernel 5.1.9
|
2019-07-04 14:19:48 +02:00 |
|
imx6qdl-wandboard-revd1.dtsi
|
wandboard: Import extra wandboard devicetree files
|
2019-07-04 14:19:48 +02:00 |
|
imx6qdl-wandboard.dtsi
|
imx: wandboard: convert FEC support to DM_ETH
|
2019-10-08 16:36:36 +02:00 |
|
imx6qdl.dtsi
|
imx: imx6qdl: dtsi: move U-Boot specific change to u-boot.dtsi
|
2019-10-08 16:35:58 +02:00 |
|
imx6qp-sabreauto-u-boot.dtsi
|
arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files
|
2019-02-15 22:01:15 +01:00 |
|
imx6qp-sabreauto.dts
|
arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd]
|
2019-02-15 22:01:15 +01:00 |
|
imx6qp-sabresd-u-boot.dtsi
|
arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files
|
2019-02-15 22:01:15 +01:00 |
|
imx6qp-sabresd.dts
|
arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd]
|
2019-02-15 22:01:15 +01:00 |
|
imx6qp-wandboard-revd1.dts
|
wandboard: Import extra wandboard devicetree files
|
2019-07-04 14:19:48 +02:00 |
|
imx6qp.dtsi
|
arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd]
|
2019-02-15 22:01:15 +01:00 |
|
imx6sl-evk.dts
|
…
|
|
|
imx6sl-pinfunc.h
|
…
|
|
|
imx6sl.dtsi
|
…
|
|
|
imx6sll-evk.dts
|
…
|
|
|
imx6sll-pinfunc.h
|
…
|
|
|
imx6sll.dtsi
|
…
|
|
|
imx6sx-pinfunc.h
|
ARM: board: udoo_neo: Import UDOO Neo dts files
|
2021-04-20 13:31:35 -04:00 |
|
imx6sx-sabreauto-u-boot.dtsi
|
dts: switch spi-flash to jedec, spi-nor compatible
|
2019-04-12 10:54:27 +05:30 |
|
imx6sx-sabreauto.dts
|
imx: imx6sx-sabreauto: convert to use DM QSPI driver
|
2018-09-04 08:47:23 +02:00 |
|
imx6sx-sdb.dts
|
ARM: dts: imx6sx-sdb: Sync with kernel 5.4.16
|
2020-03-09 15:04:51 +01:00 |
|
imx6sx-sdb.dtsi
|
ARM: dts: imx6sx-sdb: Sync with kernel 5.4.16
|
2020-03-09 15:04:51 +01:00 |
|
imx6sx-softing-vining-2000.dts
|
ARM: imx: vining2000: Repair PCIe support
|
2019-12-06 13:57:42 +01:00 |
|
imx6sx-udoo-neo-basic.dts
|
ARM: board: udoo_neo: Import UDOO Neo dts files
|
2021-04-20 13:31:35 -04:00 |
|
imx6sx-udoo-neo-extended.dts
|
ARM: board: udoo_neo: Import UDOO Neo dts files
|
2021-04-20 13:31:35 -04:00 |
|
imx6sx-udoo-neo-full.dts
|
ARM: board: udoo_neo: Import UDOO Neo dts files
|
2021-04-20 13:31:35 -04:00 |
|
imx6sx-udoo-neo-u-boot.dtsi
|
ARM: imx: udoo_neo: convert to DM_MMC
|
2021-04-20 13:31:35 -04:00 |
|
imx6sx-udoo-neo.dtsi
|
ARM: board: udoo_neo: Import UDOO Neo dts files
|
2021-04-20 13:31:35 -04:00 |
|
imx6sx.dtsi
|
ARM: dts: imx6sx: Sync with kernel 5.4.16
|
2020-03-09 15:04:42 +01:00 |
|
imx6ul-9x9-evk-u-boot.dtsi
|
dts: switch spi-flash to jedec, spi-nor compatible
|
2019-04-12 10:54:27 +05:30 |
|
imx6ul-9x9-evk.dts
|
dts: imx6ul_evk: Add DTS files for 14x14 EVK and 9x9 EVK boards
|
2018-09-04 08:47:23 +02:00 |
|
imx6ul-14x14-evk-u-boot.dtsi
|
imx: mx6ul_14x14_evk: configure for 24bpp display
|
2020-03-09 15:05:03 +01:00 |
|
imx6ul-14x14-evk.dts
|
arm: dts: sync dts for i.MX6UL
|
2019-10-08 16:33:45 +02:00 |
|
imx6ul-14x14-evk.dtsi
|
ARM: dts: imx6ul-14x14-evk: Pass the "broken-cd" property
|
2020-01-14 22:48:10 +01:00 |
|
imx6ul-geam-u-boot.dtsi
|
imx6ul: geam: Fix fdt_file mismatch
|
2018-06-27 09:51:49 +02:00 |
|
imx6ul-geam.dts
|
imx6ul: geam: Fix fdt_file mismatch
|
2018-06-27 09:51:49 +02:00 |
|
imx6ul-isiot-emmc-u-boot.dtsi
|
Fixup various SPDX tags from the latest merge
|
2018-05-18 17:56:50 -04:00 |
|
imx6ul-isiot-emmc.dts
|
ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl
|
2018-05-18 08:23:43 +02:00 |
|
imx6ul-isiot-nand.dts
|
ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl
|
2018-05-18 08:23:43 +02:00 |
|
imx6ul-isiot-u-boot.dtsi
|
Fixup various SPDX tags from the latest merge
|
2018-05-18 17:56:50 -04:00 |
|
imx6ul-isiot.dtsi
|
ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl
|
2018-05-18 08:23:43 +02:00 |
|
imx6ul-liteboard.dts
|
ARM: dts: imx6ul-lite*: add DTS files for liteSOM and liteboard
|
2019-02-15 12:45:15 +01:00 |
|
imx6ul-litesom.dtsi
|
ARM: dts: imx6ul-lite*: add DTS files for liteSOM and liteboard
|
2019-02-15 12:45:15 +01:00 |
|
imx6ul-opos6ul-u-boot.dtsi
|
ARM: opos6ul: make the board boot again
|
2018-10-09 18:36:03 +02:00 |
|
imx6ul-opos6ul.dtsi
|
ARM: opos6ul: make the board boot again
|
2018-10-09 18:36:03 +02:00 |
|
imx6ul-opos6uldev-u-boot.dtsi
|
opos6uldev: migrate to DM_VIDEO
|
2019-11-03 17:04:16 +01:00 |
|
imx6ul-opos6uldev.dts
|
opos6uldev: migrate to DM_VIDEO
|
2019-11-03 17:04:16 +01:00 |
|
imx6ul-phytec-phycore-som.dtsi
|
imx: sync with kernel device tree for Phycore SoM
|
2020-01-07 10:26:56 +01:00 |
|
imx6ul-phytec-segin-ff-rdk-nand.dts
|
imx: sync with kernel device tree for Phycore SoM
|
2020-01-07 10:26:56 +01:00 |
|
imx6ul-phytec-segin-peb-eval-01.dtsi
|
imx: sync with kernel device tree for Phycore SoM
|
2020-01-07 10:26:56 +01:00 |
|
imx6ul-phytec-segin.dtsi
|
imx: sync with kernel device tree for Phycore SoM
|
2020-01-07 10:26:56 +01:00 |
|
imx6ul-pico-hobbit.dts
|
pico-imx6ul: Import dts files from kernel
|
2019-03-13 09:14:35 +01:00 |
|
imx6ul-pico-pi.dts
|
pico-imx6ul: Import dts files from kernel
|
2019-03-13 09:14:35 +01:00 |
|
imx6ul-pico.dtsi
|
pico-imx6ul: Import dts files from kernel
|
2019-03-13 09:14:35 +01:00 |
|
imx6ul-pinfunc.h
|
arm: dts: sync dts for i.MX6UL
|
2019-10-08 16:33:45 +02:00 |
|
imx6ul-u-boot.dtsi
|
Fixup various SPDX tags from the latest merge
|
2018-05-18 17:56:50 -04:00 |
|
imx6ul.dtsi
|
arm: dts: sync dts for i.MX6UL
|
2019-10-08 16:33:45 +02:00 |
|
imx6ull-14x14-evk.dts
|
arm: dts: sync dts for i.MX6ULL
|
2019-10-08 16:33:45 +02:00 |
|
imx6ull-colibri-u-boot.dtsi
|
ARM: dts: imx6ull-colibri: move u-boot specific node
|
2020-07-27 14:00:36 +02:00 |
|
imx6ull-colibri.dts
|
ARM: dts: imx6ull-colibri: change hierarchy of DTS files
|
2019-11-03 17:04:16 +01:00 |
|
imx6ull-colibri.dtsi
|
ARM: dts: imx6ull-colibri: move u-boot specific node
|
2020-07-27 14:00:36 +02:00 |
|
imx6ull-dart-6ul.dts
|
arm: dart6ul: enable DM_ETH for the dart6ul
|
2021-01-23 11:30:31 +01:00 |
|
imx6ull-dart-6ul.dtsi
|
arm: dart6ul: enable DM_ETH for the dart6ul
|
2021-01-23 11:30:31 +01:00 |
|
imx6ull-myir-mys-6ulx-eval-u-boot.dts
|
imx: Use devicetree for SMBIOS settings on MYiR MYS-6ULX
|
2020-11-06 10:18:20 +08:00 |
|
imx6ull-myir-mys-6ulx-eval.dts
|
imx: Add MYiR Tech MYS-6ULX support
|
2020-08-03 17:03:57 +02:00 |
|
imx6ull-myir-mys-6ulx.dtsi
|
imx: Add MYiR Tech MYS-6ULX support
|
2020-08-03 17:03:57 +02:00 |
|
imx6ull-mys-6ulx-u-boot.dtsi
|
imx: Add MYiR Tech MYS-6ULX support
|
2020-08-03 17:03:57 +02:00 |
|
imx6ull-phytec-phycore-som.dtsi
|
imx: sync with kernel device tree for Phycore SoM
|
2020-01-07 10:26:56 +01:00 |
|
imx6ull-phytec-segin-ff-rdk-emmc.dts
|
imx: sync with kernel device tree for Phycore SoM
|
2020-01-07 10:26:56 +01:00 |
|
imx6ull-phytec-segin-peb-eval-01.dtsi
|
imx: sync with kernel device tree for Phycore SoM
|
2020-01-07 10:26:56 +01:00 |
|
imx6ull-phytec-segin.dtsi
|
imx: sync with kernel device tree for Phycore SoM
|
2020-01-07 10:26:56 +01:00 |
|
imx6ull-pinfunc-snvs.h
|
arm: dts: sync dts for i.MX6ULL
|
2019-10-08 16:33:45 +02:00 |
|
imx6ull-pinfunc.h
|
arm: dts: sync dts for i.MX6ULL
|
2019-10-08 16:33:45 +02:00 |
|
imx6ull-seeed-npi-imx6ull-dev-board.dts
|
imx: Add SeeedStudio NPI-IMX6ULL Support
|
2021-06-09 13:34:18 +02:00 |
|
imx6ull-seeed-npi-imx6ull-u-boot.dtsi
|
imx: Add SeeedStudio NPI-IMX6ULL Support
|
2021-06-09 13:34:18 +02:00 |
|
imx6ull-seeed-npi-imx6ull.dtsi
|
imx: Add SeeedStudio NPI-IMX6ULL Support
|
2021-06-09 13:34:18 +02:00 |
|
imx6ull-somlabs-visionsom.dts
|
ARM: imx: mx6ull: Add iMX6ULL VisionSOM SoM and EVK
|
2020-01-20 15:38:16 +01:00 |
|
imx6ull-u-boot.dtsi
|
ARM: dts: i.MX6ULL: U-Boot specific dts for u-boot, dm-spl
|
2019-06-11 10:42:48 +02:00 |
|
imx6ull.dtsi
|
arm: dts: sync dts for i.MX6ULL
|
2019-10-08 16:33:45 +02:00 |
|
imx6ulz-14x14-evk.dts
|
imx: add i.MX6ULZ board
|
2019-10-08 16:33:45 +02:00 |
|
imx6ulz.dtsi
|
arm: dts: import dts for i.MX6ULZ
|
2019-10-08 16:33:45 +02:00 |
|
imx7-cm-u-boot.dtsi
|
imx: Add support for Ronetix's iMX7-CM board
|
2021-05-02 12:46:54 +02:00 |
|
imx7-cm.dts
|
imx: Add support for Ronetix's iMX7-CM board
|
2021-05-02 12:46:54 +02:00 |
|
imx7-colibri-emmc.dts
|
ARM: dts: imx7-colibri: multiple node updates
|
2020-07-27 14:01:32 +02:00 |
|
imx7-colibri-rawnand.dts
|
ARM: dts: imx7-colibri: multiple node updates
|
2020-07-27 14:01:32 +02:00 |
|
imx7-colibri-u-boot.dtsi
|
ARM: dts: imx7-colibri: multiple node updates
|
2020-07-27 14:01:32 +02:00 |
|
imx7-colibri.dtsi
|
ARM: dts: imx7-colibri: multiple node updates
|
2020-07-27 14:01:32 +02:00 |
|
imx7d-meerkat96.dts
|
ARM: dts: import meerkat96 board support
|
2019-10-13 22:49:11 +02:00 |
|
imx7d-pico-hobbit.dts
|
Arm: imx7d-pico: Import all Linux device tree for Pico i.MX7D SOM
|
2019-04-25 19:16:24 +02:00 |
|
imx7d-pico-pi.dts
|
Arm: imx7d-pico: Import all Linux device tree for Pico i.MX7D SOM
|
2019-04-25 19:16:24 +02:00 |
|
imx7d-pico-u-boot.dtsi
|
pico-imx7d: Remove dead code for dm_video
|
2019-10-08 16:36:37 +02:00 |
|
imx7d-pico.dtsi
|
ARM: dts: pico-imx7d: sync device tree with v5.3-rc6
|
2019-10-08 16:35:59 +02:00 |
|
imx7d-pinfunc.h
|
arm: dts: imx7: Correct spelling mistake in GPIO name
|
2019-01-28 20:55:46 +01:00 |
|
imx7d-sdb-qspi-u-boot.dtsi
|
dts: switch spi-flash to jedec, spi-nor compatible
|
2019-04-12 10:54:27 +05:30 |
|
imx7d-sdb-qspi.dts
|
imx: imx7d-sdb: Add DM QSPI support
|
2018-09-04 08:47:23 +02:00 |
|
imx7d-sdb-u-boot.dtsi
|
mx7dsabre: Fix usbtog probe when use dfu or ums
|
2020-02-09 14:59:54 +01:00 |
|
imx7d-sdb.dts
|
mx7dsabre: Enable DM_ETH
|
2020-01-07 10:26:56 +01:00 |
|
imx7d-smegw01.dts
|
mx7d: Add Storopack's SMEGW01 board
|
2021-06-09 13:34:38 +02:00 |
|
imx7d.dtsi
|
ARM: dts: imx7: imx7_colibri: introduce fec node
|
2020-01-07 10:26:56 +01:00 |
|
imx7s-warp-u-boot.dtsi
|
arm: dts: imx7s-warp7: Move u-boot specific node in u-boot.dtsi
|
2020-02-09 14:59:54 +01:00 |
|
imx7s-warp.dts
|
arm: dts: imx7s-warp7: Move u-boot specific node in u-boot.dtsi
|
2020-02-09 14:59:54 +01:00 |
|
imx7s.dtsi
|
arm: dts: imx7: Fix error in coresight TPIU graph connection
|
2020-07-16 11:20:58 +02:00 |
|
imx7ulp-com.dts
|
mx7ulp: Add support for Embedded Artists COM board
|
2020-01-07 10:26:56 +01:00 |
|
imx7ulp-evk.dts
|
arm: dts: imx7ulp-evk: remove mux value from pad configuration
|
2020-01-20 15:38:16 +01:00 |
|
imx7ulp-pinfunc.h
|
mx7ulp: Sync the device tree related files
|
2019-12-06 12:05:08 +01:00 |
|
imx7ulp-pwh1.dts
|
pwh1: enable video
|
2022-02-20 23:23:50 +09:00 |
|
imx7ulp-uboot.dtsi
|
…
|
|
|
imx7ulp.dtsi
|
mx7ulp: Sync the device tree related files
|
2019-12-06 12:05:08 +01:00 |
|
imx8-deneb.dts
|
imx: add imx8x based deneb board
|
2020-01-14 22:15:21 +01:00 |
|
imx8-giedi.dts
|
imx: add imx8x capricorn giedi board
|
2020-01-14 22:15:21 +01:00 |
|
imx8mm-beacon-baseboard.dtsi
|
arm64: dts: imx8mm-beacon: Re-sync dts file with Linux 5.10-rc6
|
2020-12-26 12:35:58 +01:00 |
|
imx8mm-beacon-kit-u-boot.dtsi
|
arm64: dts: imx8mm: Add common -u-boot.dtsi
|
2021-05-02 12:46:54 +02:00 |
|
imx8mm-beacon-kit.dts
|
imx: Add support for i.MX8MM Beacon EmbeddedWorks devkit.
|
2020-05-10 20:55:20 +02:00 |
|
imx8mm-beacon-som.dtsi
|
arm64: dts: imx8mm-beacon: Resync imx8mm-beacon-som with 5.11-rc4
|
2021-01-23 13:40:29 +01:00 |
|
imx8mm-cl-iot-gate-u-boot.dtsi
|
arm: dts: add imx8mm-cl-iot-gate dts file
|
2021-05-02 12:46:54 +02:00 |
|
imx8mm-cl-iot-gate.dts
|
arm: dts: add imx8mm-cl-iot-gate dts file
|
2021-05-02 12:46:54 +02:00 |
|
imx8mm-evk-u-boot.dtsi
|
arm64: dts: imx8mm: Add common -u-boot.dtsi
|
2021-05-02 12:46:54 +02:00 |
|
imx8mm-evk.dts
|
arm: dts: imx8mm: sync dts from Linux Kernel
|
2021-01-23 11:30:31 +01:00 |
|
imx8mm-evk.dtsi
|
imx8mm_evk: Switch to new imx8mm evk board
|
2021-04-08 09:18:29 +02:00 |
|
imx8mm-icore-mx8mm-ctouch2-u-boot.dtsi
|
board: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0
|
2021-05-02 12:46:54 +02:00 |
|
imx8mm-icore-mx8mm-ctouch2.dts
|
board: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0
|
2021-05-02 12:46:54 +02:00 |
|
imx8mm-icore-mx8mm-edimm2.2-u-boot.dtsi
|
board: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit
|
2021-05-02 12:46:54 +02:00 |
|
imx8mm-icore-mx8mm-edimm2.2.dts
|
board: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit
|
2021-05-02 12:46:54 +02:00 |
|
imx8mm-icore-mx8mm-u-boot.dtsi
|
board: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit
|
2021-05-02 12:46:54 +02:00 |
|
imx8mm-icore-mx8mm.dtsi
|
arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini SoM
|
2021-05-02 12:46:54 +02:00 |
|
imx8mm-pinfunc.h
|
arm: dts: imx8mm-pinfunc: sync latest linux-next pin func header
|
2020-02-09 14:50:52 +01:00 |
|
imx8mm-u-boot.dtsi
|
arm64: dts: imx8mm: Add common -u-boot.dtsi
|
2021-05-02 12:46:54 +02:00 |
|
imx8mm-venice-gw71xx-0x-u-boot.dtsi
|
board: gateworks: imx8mm: Add Gateworks Venice board support
|
2021-03-03 14:15:02 +01:00 |
|
imx8mm-venice-gw71xx-0x.dts
|
arm: dts: imx8mm: add Gateworks i.MX8 Mini Dev kits
|
2021-03-03 14:15:02 +01:00 |
|
imx8mm-venice-gw71xx.dtsi
|
arm: dts: imx8mm: add Gateworks i.MX8 Mini Dev kits
|
2021-03-03 14:15:02 +01:00 |
|
imx8mm-venice-gw72xx-0x-u-boot.dtsi
|
board: gateworks: imx8mm: Add Gateworks Venice board support
|
2021-03-03 14:15:02 +01:00 |
|
imx8mm-venice-gw72xx-0x.dts
|
arm: dts: imx8mm: add Gateworks i.MX8 Mini Dev kits
|
2021-03-03 14:15:02 +01:00 |
|
imx8mm-venice-gw72xx.dtsi
|
arm: dts: imx8mm: add Gateworks i.MX8 Mini Dev kits
|
2021-03-03 14:15:02 +01:00 |
|
imx8mm-venice-gw73xx-0x-u-boot.dtsi
|
board: gateworks: imx8mm: Add Gateworks Venice board support
|
2021-03-03 14:15:02 +01:00 |
|
imx8mm-venice-gw73xx-0x.dts
|
arm: dts: imx8mm: add Gateworks i.MX8 Mini Dev kits
|
2021-03-03 14:15:02 +01:00 |
|
imx8mm-venice-gw73xx.dtsi
|
arm: dts: imx8mm: add Gateworks i.MX8 Mini Dev kits
|
2021-03-03 14:15:02 +01:00 |
|
imx8mm-venice-gw700x-u-boot.dtsi
|
arm64: dts: imx8mm: Add common -u-boot.dtsi
|
2021-05-02 12:46:54 +02:00 |
|
imx8mm-venice-gw700x.dtsi
|
arm: dts: imx8mm: add Gateworks i.MX8 Mini Dev kits
|
2021-03-03 14:15:02 +01:00 |
|
imx8mm-venice-u-boot.dtsi
|
arm64: dts: imx8mm: Add common -u-boot.dtsi
|
2021-05-02 12:46:54 +02:00 |
|
imx8mm-venice.dts
|
board: gateworks: imx8mm: Add Gateworks Venice board support
|
2021-03-03 14:15:02 +01:00 |
|
imx8mm-verdin-u-boot.dtsi
|
arm64: dts: imx8mm: Add common -u-boot.dtsi
|
2021-05-02 12:46:54 +02:00 |
|
imx8mm-verdin.dts
|
ARM: dts: imx8mm-verdin: follow changed pmic
|
2020-12-06 15:31:37 +01:00 |
|
imx8mm.dtsi
|
ARM: dts: imx8mm: Add power domain nodes
|
2021-04-18 04:29:35 +02:00 |
|
imx8mn-beacon-baseboard.dtsi
|
arm: dts: imx8mn, imx8mn-beacon: Sync dts files with Kernel 5.12-rc5
|
2021-04-08 20:29:53 +02:00 |
|
imx8mn-beacon-kit-u-boot.dtsi
|
imx: Add support for i.MX8MN Beacon EmbeddedWorks devkit.
|
2021-01-23 14:01:49 +01:00 |
|
imx8mn-beacon-kit.dts
|
imx: Add support for i.MX8MN Beacon EmbeddedWorks devkit.
|
2021-01-23 14:01:49 +01:00 |
|
imx8mn-beacon-som.dtsi
|
arm: dts: imx8mn, imx8mn-beacon: Sync dts files with Kernel 5.12-rc5
|
2021-04-08 20:29:53 +02:00 |
|
imx8mn-ddr4-evk-u-boot.dtsi
|
imx8mn-ddr4-evk: switch to use binman
|
2021-04-08 20:29:53 +02:00 |
|
imx8mn-ddr4-evk.dts
|
arm: dts: imx8mn: sync dts from Linux Kernel
|
2021-01-23 11:30:30 +01:00 |
|
imx8mn-evk-u-boot.dtsi
|
imx8mn-evk: switch to use binman
|
2021-04-08 20:29:53 +02:00 |
|
imx8mn-evk.dts
|
imx8mn: Add LPDDR4 EVK board support
|
2021-04-08 09:18:29 +02:00 |
|
imx8mn-evk.dtsi
|
arm: dts: imx8mn: sync dts from Linux Kernel
|
2021-01-23 11:30:30 +01:00 |
|
imx8mn-pinfunc.h
|
arm: dts: imx8mn: sync dts from Linux Kernel
|
2021-01-23 11:30:30 +01:00 |
|
imx8mn.dtsi
|
ARM: dts: imx8mn: Add power domain nodes
|
2021-04-18 04:29:36 +02:00 |
|
imx8mp-evk-u-boot.dtsi
|
imx8mp-evk: switch to use binman
|
2021-04-08 20:29:53 +02:00 |
|
imx8mp-evk.dts
|
arm: dts: imx8mp: sync dts from Linux Kernel
|
2021-01-23 11:30:31 +01:00 |
|
imx8mp-phyboard-pollux-rdk-u-boot.dtsi
|
board: phytec: imx8mp: Add PHYTEC phyCORE-i.MX8MP support
|
2021-01-23 11:30:32 +01:00 |
|
imx8mp-phyboard-pollux-rdk.dts
|
board: phytec: imx8mp: Add PHYTEC phyCORE-i.MX8MP support
|
2021-01-23 11:30:32 +01:00 |
|
imx8mp-phycore-som.dtsi
|
board: phytec: imx8mp: Add PHYTEC phyCORE-i.MX8MP support
|
2021-01-23 11:30:32 +01:00 |
|
imx8mp-pinfunc.h
|
arm: dts: imx8mp: sync dts from Linux Kernel
|
2021-01-23 11:30:31 +01:00 |
|
imx8mp.dtsi
|
arm: dts: imx8mp: sync dts from Linux Kernel
|
2021-01-23 11:30:31 +01:00 |
|
imx8mq-cm-u-boot.dtsi
|
ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CM
|
2021-05-02 12:46:54 +02:00 |
|
imx8mq-cm.dts
|
ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CM
|
2021-05-02 12:46:54 +02:00 |
|
imx8mq-evk-u-boot.dtsi
|
ARM: dts: imx8mq-evk: Remove u-boot,off-on-delay-us property
|
2021-03-01 10:21:36 +01:00 |
|
imx8mq-evk.dts
|
arm: dts: imx8mq: sync dts from Linux Kernel
|
2021-01-23 11:30:31 +01:00 |
|
imx8mq-phanbell-u-boot.dtsi
|
ARM: dts: imx8m: increase off-on delay on the SD Vcc regulator
|
2020-12-26 12:36:19 +01:00 |
|
imx8mq-phanbell.dts
|
arm: imx: Add support for Google's Coral Dev Board
|
2020-05-01 13:49:15 +02:00 |
|
imx8mq-pico-pi.dts
|
ARM: imx: pico-imx8mq: Add support for Technexion Pico-iMX8MQ
|
2020-05-10 13:19:39 +02:00 |
|
imx8mq-pinfunc.h
|
arm: dts: imx8mq: sync dts from Linux Kernel
|
2021-01-23 11:30:31 +01:00 |
|
imx8mq.dtsi
|
arm: dts: imx8mq: sync dts from Linux Kernel
|
2021-01-23 11:30:31 +01:00 |
|
imx8qm-cgtqmx8.dts
|
imx: support for conga-QMX8 board
|
2021-06-09 13:34:09 +02:00 |
|
imx8qm-rom7720-a1.dts
|
ARM: dts: imx: imx8qm-rom7720: Fix AR8031 phy-mode
|
2020-12-26 12:35:25 +01:00 |
|
imx8qxp-capricorn-u-boot.dtsi
|
imx: add imx8x capricorn giedi board
|
2020-01-14 22:15:21 +01:00 |
|
imx8qxp-capricorn.dtsi
|
imx: add imx8x capricorn giedi board
|
2020-01-14 22:15:21 +01:00 |
|
imx23-evk-u-boot.dtsi
|
mx23evk: Convert to driver model
|
2021-03-01 10:21:36 +01:00 |
|
imx23-evk.dts
|
mx23-evk: Import devicetree file from Linux
|
2021-03-01 10:21:36 +01:00 |
|
imx23-olinuxino-u-boot.dtsi
|
mx23_olinuxino: convert MMC to driver model
|
2021-04-08 23:59:50 +02:00 |
|
imx23-olinuxino.dts
|
mx23_olinuxino: enable device tree
|
2021-04-08 23:59:50 +02:00 |
|
imx23-pinfunc.h
|
mx23-evk: Import devicetree file from Linux
|
2021-03-01 10:21:36 +01:00 |
|
imx23-u-boot.dtsi
|
mx23evk: Convert to driver model
|
2021-03-01 10:21:36 +01:00 |
|
imx23.dtsi
|
mx23evk: Convert to driver model
|
2021-03-01 10:21:36 +01:00 |
|
imx28-pinfunc.h
|
ARM: dts: imx: Copy imx28 device tree related files from Linux kernel (v5.1.11)
|
2019-07-19 14:57:14 +02:00 |
|
imx28-u-boot.dtsi
|
dts: imx28: Remove #include "imx28.dtsi" from imx28-u-boot.dtsi file
|
2019-10-08 16:36:36 +02:00 |
|
imx28-xea-u-boot.dtsi
|
imx: Add support for i.MX28 based XEA board
|
2020-01-07 10:26:56 +01:00 |
|
imx28-xea.dts
|
arm: xea: dts: Add 'fec-3v3' regulator properties to prevent accidental disablement
|
2020-02-09 14:59:16 +01:00 |
|
imx28.dtsi
|
ARM: dts: imx: Copy imx28 device tree related files from Linux kernel (v5.1.11)
|
2019-07-19 14:57:14 +02:00 |
|
imx51-babbage.dts
|
imx51-babbage: Import devicetree files from Linux
|
2021-03-01 10:21:36 +01:00 |
|
imx51-pinfunc.h
|
imx51-babbage: Import devicetree files from Linux
|
2021-03-01 10:21:36 +01:00 |
|
imx51.dtsi
|
imx51-babbage: Import devicetree files from Linux
|
2021-03-01 10:21:36 +01:00 |
|
imx53-cx9020.dts
|
imx: cx9020: migrate cx9020 to CONFIG_DM_USB
|
2020-01-07 10:26:56 +01:00 |
|
imx53-kp-u-boot.dtsi
|
dts: imx: Add fixed-link property to HSC and DDC (imx53) devices
|
2020-04-18 13:08:18 +02:00 |
|
imx53-kp.dts
|
dts: Provide LED DTS description for HSC and DDC imx53 devices
|
2020-11-01 15:53:51 +01:00 |
|
imx53-m53.dtsi
|
ARM: dts: imx: m53menlo: Import M53Menlo DT from Linux
|
2019-06-27 14:14:23 +02:00 |
|
imx53-m53menlo-u-boot.dtsi
|
ARM: imx: m53menlo: Convert WDT support to DM
|
2019-07-19 20:14:50 +02:00 |
|
imx53-m53menlo.dts
|
ARM: dts: imx: m53menlo: Convert to DM_ETH
|
2020-06-08 10:43:02 +02:00 |
|
imx53-pinfunc.h
|
dts: pinctrl: Provide IMX_PAD_SION definition for imx53 pinctrl
|
2018-05-17 12:13:00 +02:00 |
|
imx53-ppd-uboot.dtsi
|
board: ge: reduce VPD EEPROM partition size
|
2020-12-06 15:31:37 +01:00 |
|
imx53-ppd.dts
|
board: ge: bx50v3, imx53ppd: use DM I2C
|
2020-02-09 21:47:20 +01:00 |
|
imx53-qsb-common.dtsi
|
ARM: dts: imx53-qsb: Describe the esdhc1 card detect pin
|
2021-03-01 10:21:36 +01:00 |
|
imx53-qsb.dts
|
imx53-qsb: Import devicetree files from Linux
|
2021-03-01 10:21:36 +01:00 |
|
imx53-usbarmory.dts
|
ARM: board: usbarmory: Import the usbarmory dts file
|
2021-04-08 20:29:53 +02:00 |
|
imx53.dtsi
|
ARM: dts: imx: imx53: Synchronize iMX53 DT with Linux
|
2019-06-27 14:14:12 +02:00 |
|
imxrt1020-evk-u-boot.dtsi
|
ARM: dts: imxrt1020-evk: move all u-boot, dm-spl to imxrt1020-evk-u-boot.dtsi file
|
2021-06-09 13:03:19 +02:00 |
|
imxrt1020-evk.dts
|
ARM: dts: imxrt1020-evk: add device_type = "memory" to memory node
|
2021-06-09 13:01:33 +02:00 |
|
imxrt1020.dtsi
|
ARM: dts: imxrt1020: add gpio5 node to this SoC
|
2021-06-09 13:03:26 +02:00 |
|
imxrt1050-evk-u-boot.dtsi
|
ARM: dts: imxrt1050-evk: move all u-boot, dm-spl to imxrt1050-evk-u-boot.dtsi file
|
2021-06-09 13:03:08 +02:00 |
|
imxrt1050-evk.dts
|
ARM: dts: imxrt1050-evk: enable usbotg1 node as host
|
2021-06-09 13:04:00 +02:00 |
|
imxrt1050.dtsi
|
ARM: dts: imxrt1050: add usbotg1, usbphy1 and usbmisc nodes
|
2021-06-09 13:03:54 +02:00 |
|
k3-am64-ddr.dtsi
|
arm: dts: k3-am642: Add ddr node
|
2021-05-12 16:31:15 +05:30 |
|
k3-am64-evm-ddr4-1600MTs.dtsi
|
arm: dts: k3-am642: Add ddr node
|
2021-05-12 16:31:15 +05:30 |
|
k3-am64-main.dtsi
|
ARM: dts: k3-am64-main: Add CPSW DT nodes
|
2021-05-12 16:36:39 +05:30 |
|
k3-am64-mcu.dtsi
|
arm: dts: ti: Add Support for AM642 SoC
|
2021-05-12 16:27:57 +05:30 |
|
k3-am64-sk-lp4-1333MTs.dtsi
|
arm: dts: am642-r5-sk: Add r5 specific dts
|
2021-05-12 16:36:38 +05:30 |
|
k3-am64.dtsi
|
ARM: dts: k3-am64-main: Add CPSW DT nodes
|
2021-05-12 16:36:39 +05:30 |
|
k3-am65-main.dtsi
|
arm: dts: k3-am65: Sync Linux v5.11-rc6 dts into U-Boot
|
2021-02-04 20:37:57 +05:30 |
|
k3-am65-mcu.dtsi
|
arm: dts: k3-am65: Sync Linux v5.11-rc6 dts into U-Boot
|
2021-02-04 20:37:57 +05:30 |
|
k3-am65-wakeup.dtsi
|
arm: dts: k3-am65: Sync Linux v5.11-rc6 dts into U-Boot
|
2021-02-04 20:37:57 +05:30 |
|
k3-am65.dtsi
|
arm: dts: k3-am65: Sync Linux v5.11-rc6 dts into U-Boot
|
2021-02-04 20:37:57 +05:30 |
|
k3-am642-evm-u-boot.dtsi
|
arm: dts: k3-am642-evm: Add sysreset controller node
|
2021-05-27 14:53:14 +05:30 |
|
k3-am642-evm.dts
|
ARM: dts: k3-am64-main: Add CPSW DT nodes
|
2021-05-12 16:36:39 +05:30 |
|
k3-am642-r5-evm.dts
|
arm: dts: k3-am642-r5-evm: Do not use power-domains for I2C
|
2021-05-12 16:32:44 +05:30 |
|
k3-am642-r5-sk.dts
|
arm: dts: am642-r5-sk: Add r5 specific dts
|
2021-05-12 16:36:38 +05:30 |
|
k3-am642-sk-u-boot.dtsi
|
arm: dts: k3-am642-sk: Add sysreset controller node
|
2021-05-27 14:53:14 +05:30 |
|
k3-am642-sk.dts
|
ARM: dts: k3-am642-sk: Add ethernet related DT nodes
|
2021-05-12 16:36:39 +05:30 |
|
k3-am642.dtsi
|
arm: dts: ti: Add Support for AM642 SoC
|
2021-05-12 16:27:57 +05:30 |
|
k3-am654-base-board-ddr4-1600MTs.dtsi
|
ddr: k3-am654: EMIF Tool update to 2.02 for IO optimizations and fixes
|
2020-05-19 14:40:27 +05:30 |
|
k3-am654-base-board-u-boot.dtsi
|
arm: dts: k3-am65: Sync Linux v5.11-rc6 dts into U-Boot
|
2021-02-04 20:37:57 +05:30 |
|
k3-am654-base-board.dts
|
arm: dts: k3-am65: Sync Linux v5.11-rc6 dts into U-Boot
|
2021-02-04 20:37:57 +05:30 |
|
k3-am654-ddr.dtsi
|
ram: k3-am654: Do not rely on default values for certain DDR register
|
2019-10-25 17:33:21 -04:00 |
|
k3-am654-industrial-thermal.dtsi
|
arm: dts: k3-am65: Sync Linux v5.11-rc6 dts into U-Boot
|
2021-02-04 20:37:57 +05:30 |
|
k3-am654-r5-base-board.dts
|
arm: dts: k3-am65: Sync Linux v5.11-rc6 dts into U-Boot
|
2021-02-04 20:37:57 +05:30 |
|
k3-am654.dtsi
|
arm: dts: k3-am65: Sync Linux v5.11-rc6 dts into U-Boot
|
2021-02-04 20:37:57 +05:30 |
|
k3-j721e-common-proc-board-u-boot.dtsi
|
arm: dts: k3-j721e: Fix up MAIN R5FSS cluster mode back to Split-mode
|
2021-05-27 14:52:16 +05:30 |
|
k3-j721e-common-proc-board.dts
|
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot
|
2021-02-04 20:37:57 +05:30 |
|
k3-j721e-ddr-evm-lp4-4266.dtsi
|
arm: dts: k3-j721e: ddr: Update to 0.5.0 version of DDR config tool
|
2021-01-12 10:21:41 +05:30 |
|
k3-j721e-ddr.dtsi
|
arm: dts: k3-j721e: Add ddr node
|
2019-10-25 17:33:21 -04:00 |
|
k3-j721e-main.dtsi
|
arm: dts: k3-j721e-main: Update the speed modes supported and their itap delay values for MMCSD subsystems
|
2021-04-16 19:09:24 +05:30 |
|
k3-j721e-mcu-wakeup.dtsi
|
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot
|
2021-02-04 20:37:57 +05:30 |
|
k3-j721e-r5-common-proc-board-u-boot.dtsi
|
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot
|
2021-02-04 20:37:57 +05:30 |
|
k3-j721e-r5-common-proc-board.dts
|
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot
|
2021-02-04 20:37:57 +05:30 |
|
k3-j721e-som-p0.dtsi
|
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot
|
2021-02-04 20:37:57 +05:30 |
|
k3-j721e.dtsi
|
arm: dts: k3-j721e: Sync Linux v5.11-rc6 dts into U-Boot
|
2021-02-04 20:37:57 +05:30 |
|
k3-j7200-common-proc-board-u-boot.dtsi
|
ARM: dts: k3-j7200-common-proc-board-u-boot: Fix broken ethernet
|
2021-02-16 10:29:57 +05:30 |
|
k3-j7200-common-proc-board.dts
|
arm: dts: k3-j7200: Sync Linux v5.11-rc6 dts into U-Boot
|
2021-02-04 20:37:57 +05:30 |
|
k3-j7200-ddr-evm-lp4-1600.dtsi
|
arm: dts: k3-j7200: Add R5 specific dts support
|
2020-08-11 20:34:46 +05:30 |
|
k3-j7200-main.dtsi
|
arm: dts: k3-j7200: Sync Linux v5.11-rc6 dts into U-Boot
|
2021-02-04 20:37:57 +05:30 |
|
k3-j7200-mcu-wakeup.dtsi
|
arm: dts: k3-j7200: Sync Linux v5.11-rc6 dts into U-Boot
|
2021-02-04 20:37:57 +05:30 |
|
k3-j7200-r5-common-proc-board.dts
|
arm: dts: k3-j7200-common-proc-board: Enable support for UHS modes
|
2021-02-04 20:37:57 +05:30 |
|
k3-j7200-som-p0.dtsi
|
arm: dts: k3-j7200: Sync Linux v5.11-rc6 dts into U-Boot
|
2021-02-04 20:37:57 +05:30 |
|
k3-j7200.dtsi
|
arm: dts: k3-j7200: Sync Linux v5.11-rc6 dts into U-Boot
|
2021-02-04 20:37:57 +05:30 |
|
keystone-clocks.dtsi
|
…
|
|
|
keystone-k2e-clocks.dtsi
|
…
|
|
|
keystone-k2e-evm-u-boot.dtsi
|
ARM: DTS: keystone: complete the description of the USB PHY devices
|
2019-10-24 11:28:17 +02:00 |
|
keystone-k2e-evm.dts
|
dts: switch spi-flash to jedec, spi-nor compatible
|
2019-04-12 10:54:27 +05:30 |
|
keystone-k2e-netcp.dtsi
|
…
|
|
|
keystone-k2e.dtsi
|
…
|
|
|
keystone-k2g-evm-u-boot.dtsi
|
ARM: DTS: keystone: complete the description of the USB PHY devices
|
2019-10-24 11:28:17 +02:00 |
|
keystone-k2g-evm.dts
|
ARM: dts: k2g-evm: Use standard compatible string for USB no-op PHY
|
2021-04-18 04:29:35 +02:00 |
|
keystone-k2g-generic-u-boot.dtsi
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
keystone-k2g-generic.dts
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
keystone-k2g-ice-u-boot.dtsi
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
keystone-k2g-ice.dts
|
Merge branch 'master' of git://git.denx.de/u-boot-spi
|
2019-04-14 00:03:06 -04:00 |
|
keystone-k2g-netcp.dtsi
|
…
|
|
|
keystone-k2g.dtsi
|
ARM: dts: k2g-evm: enable USB0 and USB1
|
2018-12-14 17:59:09 +01:00 |
|
keystone-k2hk-clocks.dtsi
|
…
|
|
|
keystone-k2hk-evm-u-boot.dtsi
|
ARM: DTS: keystone: complete the description of the USB PHY devices
|
2019-10-24 11:28:17 +02:00 |
|
keystone-k2hk-evm.dts
|
dts: switch spi-flash to jedec, spi-nor compatible
|
2019-04-12 10:54:27 +05:30 |
|
keystone-k2hk-netcp.dtsi
|
…
|
|
|
keystone-k2hk.dtsi
|
…
|
|
|
keystone-k2l-clocks.dtsi
|
…
|
|
|
keystone-k2l-evm-u-boot.dtsi
|
ARM: DTS: keystone: complete the description of the USB PHY devices
|
2019-10-24 11:28:17 +02:00 |
|
keystone-k2l-evm.dts
|
dts: switch spi-flash to jedec, spi-nor compatible
|
2019-04-12 10:54:27 +05:30 |
|
keystone-k2l-netcp.dtsi
|
…
|
|
|
keystone-k2l.dtsi
|
…
|
|
|
keystone.dtsi
|
…
|
|
|
kirkwood-98dx4122.dtsi
|
ARM: add devicetree files for kirkwood SoC
|
2018-05-17 17:35:25 +02:00 |
|
kirkwood-6192.dtsi
|
ARM: add devicetree files for kirkwood SoC
|
2018-05-17 17:35:25 +02:00 |
|
kirkwood-6281.dtsi
|
ARM: add devicetree files for kirkwood SoC
|
2018-05-17 17:35:25 +02:00 |
|
kirkwood-atl-sbx81lifkw.dts
|
dts: switch spi-flash to jedec, spi-nor compatible
|
2019-04-12 10:54:27 +05:30 |
|
kirkwood-atl-sbx81lifxcat.dts
|
dts: switch spi-flash to jedec, spi-nor compatible
|
2019-04-12 10:54:27 +05:30 |
|
kirkwood-blackarmor-nas220.dts
|
ARM: kirkwood: Add device-tree for nas220
|
2018-05-17 17:35:25 +02:00 |
|
kirkwood-d2net-u-boot.dtsi
|
arm: kirkwood: add DT spi0 alias to LaCie boards
|
2020-07-09 06:51:20 +02:00 |
|
kirkwood-d2net.dts
|
ARM: kirkwood: Add device-tree for d2net_v2 & net2big_v2
|
2018-05-29 08:33:03 +02:00 |
|
kirkwood-dns325.dts
|
ARM: kirkwood: Add device-tree for dns325
|
2018-05-17 17:35:25 +02:00 |
|
kirkwood-dnskw.dtsi
|
ARM: kirkwood: Add device-tree for dns325
|
2018-05-17 17:35:25 +02:00 |
|
kirkwood-dockstar.dts
|
ARM: kirkwood: Add device-tree for dockstar
|
2018-05-17 17:35:25 +02:00 |
|
kirkwood-dreamplug.dts
|
dts: switch spi-flash to jedec, spi-nor compatible
|
2019-04-12 10:54:27 +05:30 |
|
kirkwood-ds109.dts
|
ARM: kirkwood: Add device-tree for ds109
|
2018-05-29 08:33:03 +02:00 |
|
kirkwood-goflexnet.dts
|
ARM: kirkwood: Add device-tree for goflexhome
|
2018-05-17 17:35:25 +02:00 |
|
kirkwood-guruplug-server-plus.dts
|
ARM: kirkwood: Add device-tree for guruplug
|
2018-05-17 17:35:25 +02:00 |
|
kirkwood-ib62x0.dts
|
ARM: kirkwood: Add device-tree for ib62x0
|
2018-05-17 17:35:25 +02:00 |
|
kirkwood-iconnect.dts
|
ARM: kirkwood: Add device-tree for iconnect
|
2018-05-17 17:35:25 +02:00 |
|
kirkwood-is2-u-boot.dtsi
|
arm: kirkwood: add DT spi0 alias to LaCie boards
|
2020-07-09 06:51:20 +02:00 |
|
kirkwood-is2.dts
|
ARM: kirkwood: Add device-tree for netspace & inetspace
|
2018-05-29 08:33:03 +02:00 |
|
kirkwood-km_common.dtsi
|
km/uart: port UART interface of KM Kirkwood boards to driver model
|
2019-08-12 09:12:38 +02:00 |
|
kirkwood-km_kirkwood.dts
|
km/spi: add SPI configuration to KM Kirkwood device tree
|
2019-07-11 10:58:03 +02:00 |
|
kirkwood-lschlv2.dts
|
ARM: kirkwood: Add device-tree for lschlv2 & lsxhl
|
2018-05-29 08:33:03 +02:00 |
|
kirkwood-lsxhl.dts
|
ARM: kirkwood: Add device-tree for lschlv2 & lsxhl
|
2018-05-29 08:33:03 +02:00 |
|
kirkwood-lsxl.dtsi
|
dts: switch spi-flash to jedec, spi-nor compatible
|
2019-04-12 10:54:27 +05:30 |
|
kirkwood-net2big-u-boot.dtsi
|
arm: kirkwood: add DT spi0 alias to LaCie boards
|
2020-07-09 06:51:20 +02:00 |
|
kirkwood-net2big.dts
|
ARM: kirkwood: Add device-tree for d2net_v2 & net2big_v2
|
2018-05-29 08:33:03 +02:00 |
|
kirkwood-netxbig.dtsi
|
dts: switch spi-flash to jedec, spi-nor compatible
|
2019-04-12 10:54:27 +05:30 |
|
kirkwood-ns2-common.dtsi
|
dts: switch spi-flash to jedec, spi-nor compatible
|
2019-04-12 10:54:27 +05:30 |
|
kirkwood-ns2-u-boot.dtsi
|
arm: kirkwood: add DT spi0 alias to LaCie boards
|
2020-07-09 06:51:20 +02:00 |
|
kirkwood-ns2.dts
|
ARM: kirkwood: Add device-tree for netspace & inetspace
|
2018-05-29 08:33:03 +02:00 |
|
kirkwood-ns2lite-u-boot.dtsi
|
arm: kirkwood: add DT spi0 alias to LaCie boards
|
2020-07-09 06:51:20 +02:00 |
|
kirkwood-ns2lite.dts
|
ARM: kirkwood: Add device-tree for netspace & inetspace
|
2018-05-29 08:33:03 +02:00 |
|
kirkwood-ns2max-u-boot.dtsi
|
arm: kirkwood: add DT spi0 alias to LaCie boards
|
2020-07-09 06:51:20 +02:00 |
|
kirkwood-ns2max.dts
|
ARM: kirkwood: Add device-tree for netspace & inetspace
|
2018-05-29 08:33:03 +02:00 |
|
kirkwood-ns2mini-u-boot.dtsi
|
arm: kirkwood: add DT spi0 alias to LaCie boards
|
2020-07-09 06:51:20 +02:00 |
|
kirkwood-ns2mini.dts
|
ARM: kirkwood: Add device-tree for netspace & inetspace
|
2018-05-29 08:33:03 +02:00 |
|
kirkwood-openrd-base.dts
|
ARM: kirkwood: Add device-tree for openrd
|
2018-05-17 17:35:25 +02:00 |
|
kirkwood-openrd-client.dts
|
ARM: kirkwood: Add device-tree for openrd
|
2018-05-17 17:35:25 +02:00 |
|
kirkwood-openrd-ultimate.dts
|
ARM: kirkwood: Add device-tree for openrd
|
2018-05-17 17:35:25 +02:00 |
|
kirkwood-openrd.dtsi
|
ARM: kirkwood: Add device-tree for openrd
|
2018-05-17 17:35:25 +02:00 |
|
kirkwood-pogo_e02.dts
|
ARM: kirkwood: Add device-tree for pogo_e02
|
2018-05-17 17:35:26 +02:00 |
|
kirkwood-sheevaplug-common.dtsi
|
ARM: kirkwood: Add device-tree for sheevaplug
|
2018-05-17 17:35:26 +02:00 |
|
kirkwood-sheevaplug.dts
|
ARM: kirkwood: Add device-tree for sheevaplug
|
2018-05-17 17:35:26 +02:00 |
|
kirkwood-synology.dtsi
|
dts: switch spi-flash to jedec, spi-nor compatible
|
2019-04-12 10:54:27 +05:30 |
|
kirkwood.dtsi
|
ARM: add devicetree files for kirkwood SoC
|
2018-05-17 17:35:25 +02:00 |
|
logicpd-som-lv-35xx-devkit-u-boot.dtsi
|
ARM: omap3_logic boards: Convert to DM_ETH
|
2020-05-19 14:40:42 +05:30 |
|
logicpd-som-lv-35xx-devkit.dts
|
ARM: dts: Logic PD SOM-LV and Torpedo Boards: Resync DTS
|
2019-07-27 13:36:53 -04:00 |
|
logicpd-som-lv-37xx-devkit-u-boot.dtsi
|
ARM: omap3_logic boards: Convert to DM_ETH
|
2020-05-19 14:40:42 +05:30 |
|
logicpd-som-lv-37xx-devkit.dts
|
ARM: dts: Logic PD SOM-LV and Torpedo Boards: Resync DTS
|
2019-07-27 13:36:53 -04:00 |
|
logicpd-som-lv-baseboard.dtsi
|
ARM: dts: Logic PD SOM-LV and Torpedo Boards: Resync DTS
|
2019-07-27 13:36:53 -04:00 |
|
logicpd-som-lv.dtsi
|
ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
|
2019-08-26 11:46:20 -04:00 |
|
logicpd-torpedo-35xx-devkit-u-boot.dtsi
|
ARM: omap3_logic boards: Convert to DM_ETH
|
2020-05-19 14:40:42 +05:30 |
|
logicpd-torpedo-35xx-devkit.dts
|
ARM: dts: Logic PD SOM-LV and Torpedo Boards: Resync DTS
|
2019-07-27 13:36:53 -04:00 |
|
logicpd-torpedo-37xx-devkit-u-boot.dtsi
|
ARM: omap3_logic boards: Convert to DM_ETH
|
2020-05-19 14:40:42 +05:30 |
|
logicpd-torpedo-37xx-devkit.dts
|
ARM: dts: Logic PD SOM-LV and Torpedo Boards: Resync DTS
|
2019-07-27 13:36:53 -04:00 |
|
logicpd-torpedo-baseboard.dtsi
|
ARM: dts: Logic PD SOM-LV and Torpedo Boards: Resync DTS
|
2019-07-27 13:36:53 -04:00 |
|
logicpd-torpedo-som.dtsi
|
ARM: dts: Logic PD SOM-LV and Torpedo Boards: Resync DTS
|
2019-07-27 13:36:53 -04:00 |
|
ls1021a-iot-duart.dts
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
ls1021a-iot.dtsi
|
dts: switch spi-flash to jedec, spi-nor compatible
|
2019-04-12 10:54:27 +05:30 |
|
ls1021a-pg-wcom-expu1.dts
|
board/km: add support for expu1 design based on nxp
|
2021-06-17 11:46:11 +05:30 |
|
ls1021a-pg-wcom-seli8.dts
|
board/km: add support for seli8 design based on nxp ls102x
|
2021-04-15 14:22:17 +05:30 |
|
ls1021a-qds-duart.dts
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
ls1021a-qds-lpuart.dts
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
ls1021a-qds.dtsi
|
dts: switch spi-flash to jedec, spi-nor compatible
|
2019-04-12 10:54:27 +05:30 |
|
ls1021a-tsn.dts
|
Add support for the NXP LS1021A-TSN board
|
2019-07-25 13:13:31 -05:00 |
|
ls1021a-twr-duart.dts
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
ls1021a-twr-lpuart.dts
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
ls1021a-twr.dtsi
|
treewide: Update fsl qspi node dt properties as per spi-mem driver
|
2020-05-19 09:22:05 +05:30 |
|
ls1021a.dtsi
|
arm: dts: ls1021a.dtsi: Fix invalid reg on gpio nodes
|
2021-06-17 11:46:11 +05:30 |
|
meson-axg-s400-u-boot.dtsi
|
ARM: dts: meson-axg: add USB nodes for S400
|
2020-10-05 17:59:45 +02:00 |
|
meson-axg-s400.dts
|
arm64: dts: meson: sync dt and bindings from v5.7-rc1
|
2020-04-28 10:23:10 +02:00 |
|
meson-axg-u-boot.dtsi
|
ARM: dts: meson-axg: add USB nodes for S400
|
2020-10-05 17:59:45 +02:00 |
|
meson-axg.dtsi
|
ARM: dts: sync Amlogic GX & AXG from Linux 5.10-rc1
|
2021-01-11 14:59:54 +01:00 |
|
meson-g12-common-u-boot.dtsi
|
ARM: dts: meson-sm1: add U-Boot specific DT for graphics
|
2019-10-18 14:40:32 +02:00 |
|
meson-g12-common.dtsi
|
ARM: dts: sync amlogic G12A/SM1 DT from Linux 5.9-rc1
|
2020-10-05 17:59:45 +02:00 |
|
meson-g12.dtsi
|
ARM: dts: sync amlogic G12A/G12B/SM1 DT from Linux 5.8-rc1
|
2020-07-08 10:52:45 +02:00 |
|
meson-g12a-sei510-u-boot.dtsi
|
ARM: dts: meson-sm1: add U-Boot specific DT for graphics
|
2019-10-18 14:40:32 +02:00 |
|
meson-g12a-sei510.dts
|
arm64: dts: meson: sync dt and bindings from v5.7-rc1
|
2020-04-28 10:23:10 +02:00 |
|
meson-g12a-u200-u-boot.dtsi
|
ARM: dts: meson-sm1: add U-Boot specific DT for graphics
|
2019-10-18 14:40:32 +02:00 |
|
meson-g12a-u200.dts
|
arm64: dts: meson: sync dt and bindings from v5.7-rc1
|
2020-04-28 10:23:10 +02:00 |
|
meson-g12a.dtsi
|
arm64: dts: meson: sync dt and bindings from v5.6-rc2
|
2020-04-06 09:56:35 +02:00 |
|
meson-g12b-a311d-khadas-vim3-u-boot.dtsi
|
ARM: dts: meson-sm1: add u-boot specific MMC controller compatible
|
2020-11-12 14:31:29 +01:00 |
|
meson-g12b-a311d-khadas-vim3.dts
|
arm64: dts: meson: sync dt and bindings from v5.6-rc2
|
2020-04-06 09:56:35 +02:00 |
|
meson-g12b-a311d.dtsi
|
arm: dts: Import and update DT for Khadas VIM3
|
2019-10-18 11:57:00 +02:00 |
|
meson-g12b-gtking-pro-u-boot.dtsi
|
ARM: dts: add missing -u-boot.dtsi to enable HDMI on Beelink GTKing/King-Pro
|
2021-05-14 17:41:11 +02:00 |
|
meson-g12b-gtking-pro.dts
|
ARM: dts: import Beelink GT-King/Pro DTs from Linux 5.10
|
2021-01-11 14:59:54 +01:00 |
|
meson-g12b-gtking-u-boot.dtsi
|
ARM: dts: add missing -u-boot.dtsi to enable HDMI on Beelink GTKing/King-Pro
|
2021-05-14 17:41:11 +02:00 |
|
meson-g12b-gtking.dts
|
ARM: dts: import Beelink GT-King/Pro DTs from Linux 5.10
|
2021-01-11 14:59:54 +01:00 |
|
meson-g12b-khadas-vim3.dtsi
|
ARM: dts: sync Amlogic GX & AXG from Linux 5.10-rc1
|
2021-01-11 14:59:54 +01:00 |
|
meson-g12b-odroid-n2-plus.dts
|
ARM: dts: sync Amlogic GX & AXG from Linux 5.10-rc1
|
2021-01-11 14:59:54 +01:00 |
|
meson-g12b-odroid-n2-u-boot.dtsi
|
board: amlogic: odroid: add runtime detection of the N2/N2+/C4/HC4 variants
|
2021-02-10 10:00:51 +01:00 |
|
meson-g12b-odroid-n2.dts
|
ARM: dts: sync Amlogic GX & AXG from Linux 5.10-rc1
|
2021-01-11 14:59:54 +01:00 |
|
meson-g12b-odroid-n2.dtsi
|
ARM: dts: sync Amlogic GX & AXG from Linux 5.10-rc1
|
2021-01-11 14:59:54 +01:00 |
|
meson-g12b-s922x.dtsi
|
ARM: dts: sync amlogic G12A/G12B/SM1 DT from Linux 5.8-rc1
|
2020-07-08 10:52:45 +02:00 |
|
meson-g12b-w400.dtsi
|
ARM: dts: import Beelink GT-King/Pro DTs from Linux 5.10
|
2021-01-11 14:59:54 +01:00 |
|
meson-g12b.dtsi
|
ARM: dts: sync amlogic G12A/G12B/SM1 DT from Linux 5.8-rc1
|
2020-07-08 10:52:45 +02:00 |
|
meson-gx-libretech-pc.dtsi
|
ARM: dts: sync amlogic AXG/GXL/GXM DT from Linux 5.8-rc1
|
2020-10-05 17:59:45 +02:00 |
|
meson-gx-mali450.dtsi
|
ARM: dts: sync Amlogic GX & AXG from Linux 5.10-rc1
|
2021-01-11 14:59:54 +01:00 |
|
meson-gx-p23x-q20x.dtsi
|
ARM: dts: import WeTek Core2 DTs from Linux 5.10
|
2021-01-11 14:59:54 +01:00 |
|
meson-gx-u-boot.dtsi
|
arm64: dts: meson-gx: add back dmc register range until canvas driver is available
|
2020-04-16 16:25:51 +02:00 |
|
meson-gx.dtsi
|
ARM: dts: sync Amlogic GX & AXG from Linux 5.10-rc1
|
2021-01-11 14:59:54 +01:00 |
|
meson-gxbb-nanopi-k2-u-boot.dtsi
|
arm64: dts: meson-gx: vpu should be probed before relocation
|
2019-01-31 09:35:01 +01:00 |
|
meson-gxbb-nanopi-k2.dts
|
ARM: dts: sync amlogic AXG/GXL/GXM DT from Linux 5.8-rc1
|
2020-10-05 17:59:45 +02:00 |
|
meson-gxbb-odroidc2-u-boot.dtsi
|
arm64: dts: meson: odroidc2: readd PHY reset properties
|
2021-04-19 16:59:33 +02:00 |
|
meson-gxbb-odroidc2.dts
|
ARM: dts: sync amlogic AXG/GXL/GXM DT from Linux 5.8-rc1
|
2020-10-05 17:59:45 +02:00 |
|
meson-gxbb-p20x.dtsi
|
arm64: dts: meson: sync dt and bindings from v5.6-rc2
|
2020-04-06 09:56:35 +02:00 |
|
meson-gxbb-p200-u-boot.dtsi
|
ARM: dts: meson: add u-boot.dtsi for p200 and p201
|
2019-04-10 16:48:31 +02:00 |
|
meson-gxbb-p200.dts
|
arm64: dts: meson: sync dt and bindings from v5.6-rc2
|
2020-04-06 09:56:35 +02:00 |
|
meson-gxbb-p201-u-boot.dtsi
|
ARM: dts: meson: add u-boot.dtsi for p200 and p201
|
2019-04-10 16:48:31 +02:00 |
|
meson-gxbb-p201.dts
|
arm64: dts: meson: sync dt and bindings from v5.6-rc2
|
2020-04-06 09:56:35 +02:00 |
|
meson-gxbb.dtsi
|
ARM: dts: sync Amlogic GX & AXG from Linux 5.10-rc1
|
2021-01-11 14:59:54 +01:00 |
|
meson-gxl-mali.dtsi
|
ARM: dts: sync Amlogic GX & AXG from Linux 5.10-rc1
|
2021-01-11 14:59:54 +01:00 |
|
meson-gxl-s805x-libretech-ac-u-boot.dtsi
|
ARM: dts: sync amlogic AXG/GXL/GXM DT from Linux 5.8-rc1
|
2020-10-05 17:59:45 +02:00 |
|
meson-gxl-s805x-libretech-ac.dts
|
ARM: dts: sync Amlogic GX & AXG from Linux 5.10-rc1
|
2021-01-11 14:59:54 +01:00 |
|
meson-gxl-s805x.dtsi
|
ARM: dts: sync Amlogic GX & AXG from Linux 5.10-rc1
|
2021-01-11 14:59:54 +01:00 |
|
meson-gxl-s905d-libretech-pc-u-boot.dtsi
|
ARM: dts: sync amlogic AXG/GXL/GXM DT from Linux 5.8-rc1
|
2020-10-05 17:59:45 +02:00 |
|
meson-gxl-s905d-libretech-pc.dts
|
arm64: dts: meson: import libretech-pc from linux v5.6-rc2
|
2020-04-06 09:56:35 +02:00 |
|
meson-gxl-s905d.dtsi
|
arm64: dts: meson: import libretech-pc from linux v5.6-rc2
|
2020-04-06 09:56:35 +02:00 |
|
meson-gxl-s905x-khadas-vim-u-boot.dtsi
|
ARM: dts: sync amlogic AXG/GXL/GXM DT from Linux 5.8-rc1
|
2020-10-05 17:59:45 +02:00 |
|
meson-gxl-s905x-khadas-vim.dts
|
ARM: dts: sync amlogic AXG/GXL/GXM DT from Linux 5.8-rc1
|
2020-10-05 17:59:45 +02:00 |
|
meson-gxl-s905x-libretech-cc-u-boot.dtsi
|
ARM: dts: sync amlogic AXG/GXL/GXM DT from Linux 5.8-rc1
|
2020-10-05 17:59:45 +02:00 |
|
meson-gxl-s905x-libretech-cc-v2-u-boot.dtsi
|
arm64: meson: add support for libretech-cc v2
|
2021-01-11 14:59:54 +01:00 |
|
meson-gxl-s905x-libretech-cc-v2.dts
|
arm64: dts: import libretech-cc-v2 from linux v5.10-rc1
|
2021-01-11 14:59:54 +01:00 |
|
meson-gxl-s905x-libretech-cc.dts
|
ARM: dts: sync amlogic AXG/GXL/GXM DT from Linux 5.8-rc1
|
2020-10-05 17:59:45 +02:00 |
|
meson-gxl-s905x-p212-u-boot.dtsi
|
arm: dts: meson-gxl: Add USB Gadget nodes for U-Boot
|
2020-04-20 14:19:10 +02:00 |
|
meson-gxl-s905x-p212.dts
|
arm64: dts: meson-gx: Add hdmi_5v regulator as hdmi tx supply
|
2019-01-31 09:35:01 +01:00 |
|
meson-gxl-s905x-p212.dtsi
|
ARM: dts: sync amlogic AXG/GXL/GXM DT from Linux 5.8-rc1
|
2020-10-05 17:59:45 +02:00 |
|
meson-gxl-s905x.dtsi
|
ARM64: meson: Sync DT with Linux 4.17
|
2018-06-13 07:49:11 -04:00 |
|
meson-gxl-u-boot.dtsi
|
ARM: dts: sync amlogic AXG/GXL/GXM DT from Linux 5.8-rc1
|
2020-10-05 17:59:45 +02:00 |
|
meson-gxl.dtsi
|
ARM: dts: sync Amlogic GX & AXG from Linux 5.10-rc1
|
2021-01-11 14:59:54 +01:00 |
|
meson-gxm-khadas-vim2-u-boot.dtsi
|
ARM: dts: sync amlogic AXG/GXL/GXM DT from Linux 5.8-rc1
|
2020-10-05 17:59:45 +02:00 |
|
meson-gxm-khadas-vim2.dts
|
ARM: dts: sync amlogic AXG/GXL/GXM DT from Linux 5.8-rc1
|
2020-10-05 17:59:45 +02:00 |
|
meson-gxm-s912-libretech-pc-u-boot.dtsi
|
ARM: dts: sync amlogic AXG/GXL/GXM DT from Linux 5.8-rc1
|
2020-10-05 17:59:45 +02:00 |
|
meson-gxm-s912-libretech-pc.dts
|
arm64: dts: meson: import libretech-pc from linux v5.6-rc2
|
2020-04-06 09:56:35 +02:00 |
|
meson-gxm-wetek-core2-u-boot.dtsi
|
ARM: dts: import WeTek Core2 DTs from Linux 5.10
|
2021-01-11 14:59:54 +01:00 |
|
meson-gxm-wetek-core2.dts
|
ARM: dts: import WeTek Core2 DTs from Linux 5.10
|
2021-01-11 14:59:54 +01:00 |
|
meson-gxm.dtsi
|
ARM: dts: sync Amlogic GX & AXG from Linux 5.10-rc1
|
2021-01-11 14:59:54 +01:00 |
|
meson-khadas-vim3-u-boot.dtsi
|
arm: dts: meson-khadas-vim3: enable PCIe in U-boot
|
2021-04-19 16:59:33 +02:00 |
|
meson-khadas-vim3.dtsi
|
ARM: dts: sync Amlogic GX & AXG from Linux 5.10-rc1
|
2021-01-11 14:59:54 +01:00 |
|
meson-sm1-khadas-vim3l-u-boot.dtsi
|
ARM: dts: meson-sm1: add u-boot specific MMC controller compatible
|
2020-11-12 14:31:29 +01:00 |
|
meson-sm1-khadas-vim3l.dts
|
ARM: dts: sync Amlogic GX & AXG from Linux 5.10-rc1
|
2021-01-11 14:59:54 +01:00 |
|
meson-sm1-odroid-c4-u-boot.dtsi
|
board: amlogic: odroid: add runtime detection of the N2/N2+/C4/HC4 variants
|
2021-02-10 10:00:51 +01:00 |
|
meson-sm1-odroid-c4.dts
|
ARM: dts: sync amlogic G12A/SM1 DT from Linux 5.9-rc1
|
2020-10-05 17:59:45 +02:00 |
|
meson-sm1-sei610-u-boot.dtsi
|
ARM: dts: meson-sm1: add u-boot specific MMC controller compatible
|
2020-11-12 14:31:29 +01:00 |
|
meson-sm1-sei610.dts
|
ARM: dts: sync amlogic G12A/G12B/SM1 DT from Linux 5.8-rc1
|
2020-07-08 10:52:45 +02:00 |
|
meson-sm1-u-boot.dtsi
|
ARM: dts: meson-sm1: add u-boot specific MMC controller compatible
|
2020-11-12 14:31:29 +01:00 |
|
meson-sm1.dtsi
|
ARM: dts: sync amlogic G12A/G12B/SM1 DT from Linux 5.8-rc1
|
2020-07-08 10:52:45 +02:00 |
|
mt7622-bananapi-bpi-r64.dts
|
arm: dts: mt7622: add USB nodes
|
2020-08-24 14:11:31 -04:00 |
|
mt7622-rfb.dts
|
arm: dts: enable MTK SPI NOR controller driver
|
2021-01-29 10:35:14 -05:00 |
|
mt7622-u-boot.dtsi
|
ARM: MediaTek: Add support for MediaTek MT7622 SoC
|
2020-01-16 09:39:45 -05:00 |
|
mt7622.dtsi
|
arm: dts: enable MTK SPI NOR controller driver
|
2021-01-29 10:35:14 -05:00 |
|
mt7623-u-boot.dtsi
|
arm: dts: mediatek: move u-boot properties to -u-boot.dtsi file
|
2020-01-16 09:39:45 -05:00 |
|
mt7623.dtsi
|
arm: dts: mt7623: add USB nodes
|
2020-08-24 14:11:31 -04:00 |
|
mt7623a-unielec-u7623-02-emmc.dts
|
board: mediatek: Add support for UniElec U7623 board
|
2020-07-29 08:43:40 -04:00 |
|
mt7623n-bananapi-bpi-r2.dts
|
arm: dts: mt7623: add USB nodes
|
2020-08-24 14:11:31 -04:00 |
|
mt7629-rfb-u-boot.dtsi
|
board: mt7629: enable compression of u-boot to reduce the size of final image
|
2021-03-20 16:24:27 -04:00 |
|
mt7629-rfb.dts
|
dts: mt7629: enable JTAG pins by default
|
2021-03-20 16:24:27 -04:00 |
|
mt7629.dtsi
|
dts: mt7629: enable JTAG pins by default
|
2021-03-20 16:24:27 -04:00 |
|
mt8183-pumpkin.dts
|
board: Add MT8183 pumpkin board support
|
2021-03-20 16:24:27 -04:00 |
|
mt8183.dtsi
|
ARM: mediatek: Add MT8183 support
|
2021-03-20 16:24:27 -04:00 |
|
mt8512-bm1-emmc.dts
|
arm: dts: mt8512: add usb related nodes
|
2020-10-20 00:49:05 +02:00 |
|
mt8512.dtsi
|
arm: dts: mt8512: add usb related nodes
|
2020-10-20 00:49:05 +02:00 |
|
mt8516-pumpkin.dts
|
arm: dts: mt8516-pumpkin: enable usb port
|
2021-01-18 14:59:19 -05:00 |
|
mt8516-u-boot.dtsi
|
ARM: MediaTek: Add support for MT8516 SoC
|
2019-04-23 17:57:26 -04:00 |
|
mt8516.dtsi
|
arm: dts: mt8516: add support for USB
|
2021-01-18 14:59:19 -05:00 |
|
mt8518-ap1-emmc.dts
|
ARM: MediaTek: add basic support for MT8518 boards
|
2019-12-03 12:00:03 -05:00 |
|
mt8518.dtsi
|
usb: musb-new: mt85xx: add musb-new gadget driver.
|
2020-01-25 12:04:36 -05:00 |
|
mxs-pinfunc.h
|
ARM: dts: imx: Copy imx28 device tree related files from Linux kernel (v5.1.11)
|
2019-07-19 14:57:14 +02:00 |
|
ns3-board.dts
|
board: ns3: define ddr memory layout
|
2020-07-29 10:37:11 -04:00 |
|
ns3.dtsi
|
board: ns3: add support for Broadcom Northstar 3
|
2020-07-29 10:13:40 -04:00 |
|
o4-imx-nano.dts
|
o4-imx-nano: Fix dtc warnings
|
2021-06-21 13:31:40 +02:00 |
|
o4-imx6ull-nano.dtsi
|
Add out4.ru O4-iMX-NANO board
|
2021-06-09 13:32:42 +02:00 |
|
omap-gpmc-smsc911x.dtsi
|
…
|
|
|
omap-gpmc-smsc9221.dtsi
|
…
|
|
|
omap3-beagle-u-boot.dtsi
|
omap3_beagle: Update for DM SPL support
|
2019-02-19 16:58:23 -05:00 |
|
omap3-beagle-xm-ab-u-boot.dtsi
|
omap3_beagle: Update for DM SPL support
|
2019-02-19 16:58:23 -05:00 |
|
omap3-beagle-xm-ab.dts
|
…
|
|
|
omap3-beagle-xm-u-boot.dtsi
|
omap3_beagle: Update for DM SPL support
|
2019-02-19 16:58:23 -05:00 |
|
omap3-beagle-xm.dts
|
…
|
|
|
omap3-beagle.dts
|
…
|
|
|
omap3-cpu-thermal.dtsi
|
…
|
|
|
omap3-evm-37xx-u-boot.dtsi
|
ARM: omap3: evm: Complete DM_ETH and DM_USB migrations
|
2020-08-11 20:34:45 +05:30 |
|
omap3-evm-37xx.dts
|
ARM: dts: omap3-evm: Sync dts(i) files from Linux 5.1.5
|
2019-07-13 11:11:27 -04:00 |
|
omap3-evm-common.dtsi
|
ARM: dts: omap3-evm: Sync dts(i) files from Linux 5.1.5
|
2019-07-13 11:11:27 -04:00 |
|
omap3-evm-processor-common.dtsi
|
ARM: dts: omap3-evm: Sync dts(i) files from Linux 5.1.5
|
2019-07-13 11:11:27 -04:00 |
|
omap3-evm-u-boot.dtsi
|
ARM: omap3: evm: Complete DM_ETH and DM_USB migrations
|
2020-08-11 20:34:45 +05:30 |
|
omap3-evm.dts
|
…
|
|
|
omap3-igep.dtsi
|
omap3: igep00x0: Add Device Tree Support and DM_MMC driver
|
2019-01-15 15:28:42 -05:00 |
|
omap3-igep0020-common.dtsi
|
omap3: igep00x0: Add Device Tree Support and DM_MMC driver
|
2019-01-15 15:28:42 -05:00 |
|
omap3-igep0020-u-boot.dtsi
|
omap3: igep00x0: Add Device Tree Support and DM_MMC driver
|
2019-01-15 15:28:42 -05:00 |
|
omap3-igep0020.dts
|
omap3: igep00x0: Add Device Tree Support and DM_MMC driver
|
2019-01-15 15:28:42 -05:00 |
|
omap3-panel-sharp-ls037v7dw01.dtsi
|
…
|
|
|
omap3-u-boot.dtsi
|
ARM: DTS: omap3-u-boot.dtsi
|
2019-02-19 16:58:23 -05:00 |
|
omap3.dtsi
|
ARM: dts: Resync OMAP3 and omap36xx with Linux 4.18-RC4
|
2018-07-23 14:33:21 -04:00 |
|
omap3xxx-clocks.dtsi
|
…
|
|
|
omap4-cpu-thermal.dtsi
|
…
|
|
|
omap4-l4-abe.dtsi
|
omap4: Copy device tree from Linux 5.7.y
|
2020-06-16 17:00:12 +05:30 |
|
omap4-l4.dtsi
|
omap4: Copy device tree from Linux 5.7.y
|
2020-06-16 17:00:12 +05:30 |
|
omap4-mcpdm.dtsi
|
omap4: Copy device tree from Linux 5.7.y
|
2020-06-16 17:00:12 +05:30 |
|
omap4-panda-common.dtsi
|
omap4: Copy device tree from Linux 5.7.y
|
2020-06-16 17:00:12 +05:30 |
|
omap4-panda-es.dts
|
omap4: Copy device tree from Linux 5.7.y
|
2020-06-16 17:00:12 +05:30 |
|
omap4-panda.dts
|
omap4: Copy device tree from Linux 5.7.y
|
2020-06-16 17:00:12 +05:30 |
|
omap4-sdp-es23plus.dts
|
omap4: Copy device tree from Linux 5.7.y for SDP4430
|
2020-06-16 17:00:12 +05:30 |
|
omap4-sdp.dts
|
omap4: Copy device tree from Linux 5.7.y for SDP4430
|
2020-06-16 17:00:12 +05:30 |
|
omap4-u-boot.dtsi
|
omap4: panda: convert to device model
|
2020-06-16 17:00:12 +05:30 |
|
omap4.dtsi
|
omap4: Copy device tree from Linux 5.7.y
|
2020-06-16 17:00:12 +05:30 |
|
omap5-board-common.dtsi
|
omap5: Copy device tree from linux 5.7.y
|
2020-06-16 17:00:12 +05:30 |
|
omap5-core-thermal.dtsi
|
…
|
|
|
omap5-gpu-thermal.dtsi
|
…
|
|
|
omap5-l4-abe.dtsi
|
omap5: Copy device tree from linux 5.7.y
|
2020-06-16 17:00:12 +05:30 |
|
omap5-l4.dtsi
|
omap5: Copy device tree from linux 5.7.y
|
2020-06-16 17:00:12 +05:30 |
|
omap5-u-boot.dtsi
|
omap5: uevm: convert to device model
|
2020-06-16 17:00:12 +05:30 |
|
omap5-uevm.dts
|
omap5: Copy device tree from linux 5.7.y
|
2020-06-16 17:00:12 +05:30 |
|
omap5.dtsi
|
omap5: Copy device tree from linux 5.7.y
|
2020-06-16 17:00:12 +05:30 |
|
omap34xx-omap36xx-clocks.dtsi
|
…
|
|
|
omap34xx.dtsi
|
…
|
|
|
omap36xx-am35xx-omap3430es2plus-clocks.dtsi
|
…
|
|
|
omap36xx-clocks.dtsi
|
…
|
|
|
omap36xx-omap3430es2plus-clocks.dtsi
|
…
|
|
|
omap36xx.dtsi
|
ARM: dts: Resync OMAP3 and omap36xx with Linux 4.18-RC4
|
2018-07-23 14:33:21 -04:00 |
|
omap44xx-clocks.dtsi
|
omap4: Copy device tree from Linux 5.7.y
|
2020-06-16 17:00:12 +05:30 |
|
omap54xx-clocks.dtsi
|
omap5: Copy device tree from linux 5.7.y
|
2020-06-16 17:00:12 +05:30 |
|
omap443x-clocks.dtsi
|
omap4: Copy device tree from Linux 5.7.y
|
2020-06-16 17:00:12 +05:30 |
|
omap443x.dtsi
|
omap4: Copy device tree from Linux 5.7.y
|
2020-06-16 17:00:12 +05:30 |
|
omap446x-clocks.dtsi
|
omap4: Copy device tree from Linux 5.7.y
|
2020-06-16 17:00:12 +05:30 |
|
omap4460.dtsi
|
omap4: Copy device tree from Linux 5.7.y
|
2020-06-16 17:00:12 +05:30 |
|
phycore-imx8mm-u-boot.dtsi
|
arm64: dts: imx8mm: Add common -u-boot.dtsi
|
2021-05-02 12:46:54 +02:00 |
|
phycore-imx8mm.dts
|
board: phytec: imx8mm: Add PHYTEC phyCORE-i.MX8MM support
|
2020-11-01 15:58:19 +01:00 |
|
phytium-durian.dts
|
arm: add initial support for the Phytium Durian Board
|
2019-11-07 18:01:13 -05:00 |
|
poplar-pinctrl.dtsi
|
poplar: sync up device tree with kernel 4.20
|
2019-01-25 12:12:56 -05:00 |
|
px30-engicam-common.dtsi
|
arm64: dts: rockchip: px30: Add Engicam EDIMM2.2 Starter Kit
|
2020-10-30 23:31:26 +08:00 |
|
px30-engicam-ctouch2.dtsi
|
arm64: dts: rockchip: px30: Add Engicam C.TOUCH 2.0
|
2020-10-30 23:31:26 +08:00 |
|
px30-engicam-edimm2.2.dtsi
|
arm64: dts: rockchip: px30: Add Engicam EDIMM2.2 Starter Kit
|
2020-10-30 23:31:26 +08:00 |
|
px30-evb-u-boot.dtsi
|
arm: dts: rockchip: px30: add and enable rng node
|
2020-04-29 10:30:55 +08:00 |
|
px30-evb.dts
|
rockchip: px30-evb: remove redundant include file
|
2020-04-28 20:47:44 +08:00 |
|
px30-firefly-u-boot.dtsi
|
rockchip: px30: add -u-boot dtsi for soc
|
2020-04-28 20:47:44 +08:00 |
|
px30-firefly.dts
|
rockchip: px30-firefly add standalone dts
|
2019-12-27 14:26:13 +08:00 |
|
px30-px30-core-ctouch2.dts
|
rockchip: Add Engicam PX30.Core C.TOUCH 2.0
|
2020-10-30 23:31:26 +08:00 |
|
px30-px30-core-edimm2.2.dts
|
rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit
|
2020-10-30 23:31:26 +08:00 |
|
px30-px30-core.dtsi
|
arm64: dts: rockchip: Add Engicam PX30.Core SOM
|
2020-10-30 23:31:26 +08:00 |
|
px30-u-boot.dtsi
|
arm: dts: rockchip: px30: add and enable rng node
|
2020-04-29 10:30:55 +08:00 |
|
px30.dtsi
|
rockchip: px30: sync the main px30 dtsi from mainline
|
2020-02-19 16:45:38 +08:00 |
|
qcom-ipq4019.dtsi
|
IPQ40xx: Add PRNG support
|
2020-10-22 09:54:54 -04:00 |
|
qoriq-fman3-0-1g-0.dtsi
|
ARM: dts: add QorIQ DPAA 1 FMan v3 device tree nodes
|
2020-04-29 11:10:54 +05:30 |
|
qoriq-fman3-0-1g-1.dtsi
|
ARM: dts: add QorIQ DPAA 1 FMan v3 device tree nodes
|
2020-04-29 11:10:54 +05:30 |
|
qoriq-fman3-0-1g-2.dtsi
|
ARM: dts: add QorIQ DPAA 1 FMan v3 device tree nodes
|
2020-04-29 11:10:54 +05:30 |
|
qoriq-fman3-0-1g-3.dtsi
|
ARM: dts: add QorIQ DPAA 1 FMan v3 device tree nodes
|
2020-04-29 11:10:54 +05:30 |
|
qoriq-fman3-0-1g-4.dtsi
|
ARM: dts: add QorIQ DPAA 1 FMan v3 device tree nodes
|
2020-04-29 11:10:54 +05:30 |
|
qoriq-fman3-0-1g-5.dtsi
|
ARM: dts: add QorIQ DPAA 1 FMan v3 device tree nodes
|
2020-04-29 11:10:54 +05:30 |
|
qoriq-fman3-0-10g-0.dtsi
|
ARM: dts: add QorIQ DPAA 1 FMan v3 device tree nodes
|
2020-04-29 11:10:54 +05:30 |
|
qoriq-fman3-0-10g-1.dtsi
|
ARM: dts: add QorIQ DPAA 1 FMan v3 device tree nodes
|
2020-04-29 11:10:54 +05:30 |
|
qoriq-fman3-0.dtsi
|
ARM: dts: add QorIQ DPAA 1 FMan v3 device tree nodes
|
2020-04-29 11:10:54 +05:30 |
|
r7s72100-gr-peach-u-boot.dts
|
ARM: dts: renesas: Remove leading 0x from rpc node
|
2021-01-18 13:29:12 +01:00 |
|
r7s72100-gr-peach.dts
|
ARM: dts: renesas: Add RZ/A1 GR-Peach board
|
2019-05-07 05:41:32 +02:00 |
|
r7s72100.dtsi
|
ARM: dts: renesas: Add RZ/A1 platform code
|
2019-05-07 05:41:32 +02:00 |
|
r8a774a1-beacon-rzg2m-kit-u-boot.dtsi
|
ARM: rmobile: Add Beacon EmbeddedWorks RZG2M Dev Kit
|
2020-07-25 14:19:26 +02:00 |
|
r8a774a1-beacon-rzg2m-kit.dts
|
arm: dts: r8a774a1: Import DTS queued for Linux 5.12-rc1
|
2021-02-07 21:12:57 +01:00 |
|
r8a774a1-hihope-rzg2m-ex.dts
|
arm: dts: rmobile: r8a774a1: Synchronize DTs with Linux 5.10
|
2021-01-31 14:08:45 +01:00 |
|
r8a774a1-hihope-rzg2m-u-boot.dts
|
arm: dts: rmobile: r8a774a1: Synchronize DTs with Linux 5.10
|
2021-01-31 14:08:45 +01:00 |
|
r8a774a1-hihope-rzg2m.dts
|
arm: dts: rmobile: r8a774a1: Synchronize DTs with Linux 5.10
|
2021-01-31 14:08:45 +01:00 |
|
r8a774a1-u-boot.dtsi
|
arm: dts: rmobile: r8a774a1: Synchronize DTs with Linux 5.10
|
2021-01-31 14:08:45 +01:00 |
|
r8a774a1.dtsi
|
arm: dts: r8a774a1: Import DTS queued for Linux 5.12-rc1
|
2021-02-07 21:12:57 +01:00 |
|
r8a774b1-beacon-rzg2n-kit-u-boot.dtsi
|
ARM: rmobile: Add Beacon EmbeddedWorks RZG2N Dev Kit
|
2021-02-07 21:12:57 +01:00 |
|
r8a774b1-beacon-rzg2n-kit.dts
|
ARM: rmobile: Add Beacon EmbeddedWorks RZG2N Dev Kit
|
2021-02-07 21:12:57 +01:00 |
|
r8a774b1-hihope-rzg2n-ex.dts
|
arm: dts: rmobile: r8a774b1: Synchronize DTs with Linux 5.11
|
2021-03-16 20:09:29 +01:00 |
|
r8a774b1-hihope-rzg2n-u-boot.dts
|
arm: rmobile: Add HopeRun HiHope RZ/G2N board support
|
2021-03-16 20:09:29 +01:00 |
|
r8a774b1-hihope-rzg2n.dts
|
arm: dts: rmobile: r8a774b1: Synchronize DTs with Linux 5.11
|
2021-03-16 20:09:29 +01:00 |
|
r8a774b1-u-boot.dtsi
|
arm: rmobile: Add HopeRun HiHope RZ/G2N board support
|
2021-03-16 20:09:29 +01:00 |
|
r8a774b1.dtsi
|
arm: dts: r8a774b1: Import DTS queued for Linux 5.12-rc1
|
2021-02-07 21:12:57 +01:00 |
|
r8a774c0-cat874.dts
|
arm: rmobile: Add Silicon Linux EK874 board support
|
2021-03-16 20:09:29 +01:00 |
|
r8a774c0-ek874-u-boot.dts
|
arm: rmobile: Add Silicon Linux EK874 board support
|
2021-03-16 20:09:29 +01:00 |
|
r8a774c0-ek874.dts
|
arm: rmobile: Add Silicon Linux EK874 board support
|
2021-03-16 20:09:29 +01:00 |
|
r8a774c0-u-boot.dtsi
|
arm: rmobile: Add Silicon Linux EK874 board support
|
2021-03-16 20:09:29 +01:00 |
|
r8a774c0.dtsi
|
arm: dts: r8a774c0: Resync R8A774C0 SoC DTSI with Linux 5.11
|
2021-03-16 20:09:29 +01:00 |
|
r8a774e1-beacon-rzg2h-kit-u-boot.dtsi
|
ARM: rmobile: Add Beacon EmbeddedWorks RZG2H Dev Kit
|
2021-02-07 21:12:57 +01:00 |
|
r8a774e1-beacon-rzg2h-kit.dts
|
ARM: rmobile: Add Beacon EmbeddedWorks RZG2H Dev Kit
|
2021-02-07 21:12:57 +01:00 |
|
r8a774e1-hihope-rzg2h-ex.dts
|
arm: dts: rmobile: r8a774e1: Synchronize DTs with Linux 5.11
|
2021-03-16 20:09:29 +01:00 |
|
r8a774e1-hihope-rzg2h-u-boot.dts
|
arm: rmobile: Add HopeRun HiHope RZ/G2H board support
|
2021-03-16 20:09:29 +01:00 |
|
r8a774e1-hihope-rzg2h.dts
|
arm: dts: rmobile: r8a774e1: Synchronize DTs with Linux 5.11
|
2021-03-16 20:09:29 +01:00 |
|
r8a774e1-u-boot.dtsi
|
arm: rmobile: Add HopeRun HiHope RZ/G2H board support
|
2021-03-16 20:09:29 +01:00 |
|
r8a774e1.dtsi
|
arm: dts: r8a774e1: Import DTS queued for Linux 5.12-rc1
|
2021-02-07 21:12:57 +01:00 |
|
r8a779x-u-boot.dtsi
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
r8a7790-lager-u-boot.dts
|
ARM: dts: rmobile: Force 1-bit bus width on Gen2 QSPI
|
2019-03-09 17:57:04 +01:00 |
|
r8a7790-lager.dts
|
ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
r8a7790-stout-u-boot.dts
|
ARM: dts: rmobile: Force 1-bit bus width on Gen2 QSPI
|
2019-03-09 17:57:04 +01:00 |
|
r8a7790-stout.dts
|
ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
r8a7790-u-boot.dtsi
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
r8a7790.dtsi
|
ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
r8a7791-koelsch-u-boot.dts
|
ARM: dts: rmobile: Force 1-bit bus width on Gen2 QSPI
|
2019-03-09 17:57:04 +01:00 |
|
r8a7791-koelsch.dts
|
ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
r8a7791-porter-u-boot.dts
|
ARM: dts: rmobile: Force 1-bit bus width on Gen2 QSPI
|
2019-03-09 17:57:04 +01:00 |
|
r8a7791-porter.dts
|
ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
r8a7791-u-boot.dtsi
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
r8a7791.dtsi
|
ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
r8a7792-blanche-u-boot.dts
|
ARM: dts: rmobile: Enable IIC3 on V2H Blanche
|
2020-03-30 03:49:23 +02:00 |
|
r8a7792-blanche.dts
|
ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
r8a7792-u-boot.dtsi
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
r8a7792.dtsi
|
ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
r8a7793-gose-u-boot.dts
|
ARM: dts: rmobile: Force 1-bit bus width on Gen2 QSPI
|
2019-03-09 17:57:04 +01:00 |
|
r8a7793-gose.dts
|
ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
r8a7793-u-boot.dtsi
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
r8a7793.dtsi
|
ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
r8a7794-alt-u-boot.dts
|
ARM: dts: rmobile: Enable USB on E2 Alt
|
2019-04-09 18:19:10 +02:00 |
|
r8a7794-alt.dts
|
ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
r8a7794-silk-u-boot.dts
|
ARM: dts: rmobile: Force 1-bit bus width on Gen2 QSPI
|
2019-03-09 17:57:04 +01:00 |
|
r8a7794-silk.dts
|
ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
r8a7794-u-boot.dtsi
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
r8a7794.dtsi
|
ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
r8a77950-salvator-x-u-boot.dts
|
ARM: rmobile: Enable RPC on Salvator-X, ULCB, Ebisu
|
2020-09-26 17:25:42 +02:00 |
|
r8a77950-salvator-x.dts
|
ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
r8a77950-u-boot.dtsi
|
ARM: dts: renesas: Remove leading 0x from rpc node
|
2021-01-18 13:29:12 +01:00 |
|
r8a77950-ulcb-u-boot.dts
|
ARM: rmobile: Enable RPC on Salvator-X, ULCB, Ebisu
|
2020-09-26 17:25:42 +02:00 |
|
r8a77950-ulcb.dts
|
ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
r8a77950.dtsi
|
ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
r8a77951.dtsi
|
ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
r8a77960-salvator-x-u-boot.dts
|
ARM: rmobile: Enable RPC on Salvator-X, ULCB, Ebisu
|
2020-09-26 17:25:42 +02:00 |
|
r8a77960-salvator-x.dts
|
ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
r8a77960-u-boot.dtsi
|
ARM: dts: renesas: Remove leading 0x from rpc node
|
2021-01-18 13:29:12 +01:00 |
|
r8a77960-ulcb-u-boot.dts
|
ARM: rmobile: Enable RPC on Salvator-X, ULCB, Ebisu
|
2020-09-26 17:25:42 +02:00 |
|
r8a77960-ulcb.dts
|
ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
r8a77960.dtsi
|
ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
r8a77965-salvator-x-u-boot.dts
|
ARM: rmobile: Enable RPC on Salvator-X, ULCB, Ebisu
|
2020-09-26 17:25:42 +02:00 |
|
r8a77965-salvator-x.dts
|
ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
r8a77965-u-boot.dtsi
|
ARM: dts: renesas: Remove leading 0x from rpc node
|
2021-01-18 13:29:12 +01:00 |
|
r8a77965-ulcb-u-boot.dts
|
ARM: rmobile: Enable RPC on Salvator-X, ULCB, Ebisu
|
2020-09-26 17:25:42 +02:00 |
|
r8a77965-ulcb.dts
|
ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
r8a77965.dtsi
|
ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
r8a77970-eagle-u-boot.dts
|
dts: switch spi-flash to jedec, spi-nor compatible
|
2019-04-12 10:54:27 +05:30 |
|
r8a77970-eagle.dts
|
ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
r8a77970-u-boot.dtsi
|
ARM: dts: renesas: Remove leading 0x from rpc node
|
2021-01-18 13:29:12 +01:00 |
|
r8a77970.dtsi
|
ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
r8a77980-condor-u-boot.dts
|
ARM: renesas: Add R8A77980 V3H Condor board code
|
2019-08-09 23:15:01 +02:00 |
|
r8a77980-condor.dts
|
ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
r8a77980-u-boot.dtsi
|
ARM: dts: renesas: Remove leading 0x from rpc node
|
2021-01-18 13:29:12 +01:00 |
|
r8a77980.dtsi
|
ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
r8a77990-ebisu-u-boot.dts
|
ARM: rmobile: Enable RPC on Salvator-X, ULCB, Ebisu
|
2020-09-26 17:25:42 +02:00 |
|
r8a77990-ebisu.dts
|
ARM: dts: rmobile: Enable eMMC DDR52 modes on Gen3 Salvator-X(S),ULCB,Ebisu
|
2020-05-20 13:20:25 +02:00 |
|
r8a77990-u-boot.dtsi
|
ARM: dts: renesas: Remove leading 0x from rpc node
|
2021-01-18 13:29:12 +01:00 |
|
r8a77990.dtsi
|
ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
r8a77995-draak-u-boot.dts
|
ARM: rmobile: Enable RPC on Salvator-X, ULCB, Ebisu
|
2020-09-26 17:25:42 +02:00 |
|
r8a77995-draak.dts
|
ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
r8a77995-u-boot.dtsi
|
ARM: dts: renesas: Remove leading 0x from rpc node
|
2021-01-18 13:29:12 +01:00 |
|
r8a77995.dtsi
|
ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
rk3xxx.dtsi
|
SPDX: Convert all of our multiple license tags to Linux Kernel style
|
2018-05-07 10:24:31 -04:00 |
|
rk322x.dtsi
|
ARM: dts: rk322x: Correct the uart2 default pin configuration
|
2019-02-01 16:59:11 +01:00 |
|
rk3036-sdk-u-boot.dtsi
|
arm: dts: rk3036: Add rk3036-u-boot.dtsi
|
2020-01-30 11:44:01 +08:00 |
|
rk3036-sdk.dts
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
rk3036-u-boot.dtsi
|
rockchip: Add Single boot image (with binman, pad_cat)
|
2020-01-30 11:44:01 +08:00 |
|
rk3036.dtsi
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
rk3128-evb.dts
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
rk3128.dtsi
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
rk3188-radxarock-u-boot.dtsi
|
arm: dts: rk3188: Add rk3188-u-boot.dtsi
|
2020-01-30 11:44:01 +08:00 |
|
rk3188-radxarock.dts
|
rockchip: rk3188: explicitly set vcc_sd0 pin to gpio on rk3188-radxarock
|
2018-10-02 09:35:39 +02:00 |
|
rk3188-u-boot.dtsi
|
rockchip: Add Single boot image (with binman, pad_cat)
|
2020-01-30 11:44:01 +08:00 |
|
rk3188.dtsi
|
SPDX: Convert all of our multiple license tags to Linux Kernel style
|
2018-05-07 10:24:31 -04:00 |
|
rk3229-evb.dts
|
rockchip: rk322x: dts: enable uart2 for SPL/TPL
|
2019-05-08 17:34:12 +08:00 |
|
rk3288-evb-u-boot.dtsi
|
rockchip: evb-rk3288: add -u-boot.dtsi
|
2019-07-20 23:59:44 +08:00 |
|
rk3288-evb.dts
|
rockchip: evb-rk3288: add -u-boot.dtsi
|
2019-07-20 23:59:44 +08:00 |
|
rk3288-evb.dtsi
|
rockchip: rk3288-evb: dts: remove 'vmmc' from emmc node
|
2018-12-15 20:56:46 +01:00 |
|
rk3288-firefly-u-boot.dtsi
|
rockchip: rk3288-firefly: sync sdmmc pinctrl from mainline
|
2019-07-20 23:59:44 +08:00 |
|
rk3288-firefly.dts
|
rockchip: firefly-rk3288: add -u-boot.dtsi
|
2019-07-20 23:59:44 +08:00 |
|
rk3288-firefly.dtsi
|
rockchip: rk3288-firefly: sync sdmmc pinctrl from mainline
|
2019-07-20 23:59:44 +08:00 |
|
rk3288-miqi-u-boot.dtsi
|
rockchip: miqi-rk3288: add -u-boot.dtsi
|
2019-07-20 23:59:44 +08:00 |
|
rk3288-miqi.dts
|
rockchip: miqi-rk3288: add -u-boot.dtsi
|
2019-07-20 23:59:44 +08:00 |
|
rk3288-miqi.dtsi
|
SPDX: Convert all of our multiple license tags to Linux Kernel style
|
2018-05-07 10:24:31 -04:00 |
|
rk3288-phycore-rdk.dts
|
rockchip: phycore: remove no use "u-boot, boot0" in dts
|
2019-07-29 10:25:27 +08:00 |
|
rk3288-phycore-som.dtsi
|
…
|
|
|
rk3288-popmetal-u-boot.dtsi
|
rockchip: popmetal-rk3288: add -u-boot.dtsi
|
2019-07-20 23:59:44 +08:00 |
|
rk3288-popmetal.dts
|
rockchip: popmetal-rk3288: add -u-boot.dtsi
|
2019-07-20 23:59:44 +08:00 |
|
rk3288-popmetal.dtsi
|
…
|
|
|
rk3288-rock-pi-n8-u-boot.dtsi
|
arm64: dts: rockchip: Add chosen node for ROCK-Pi N8
|
2020-10-30 23:09:01 +08:00 |
|
rk3288-rock-pi-n8.dts
|
ARM: dts: rockchip: Sync ROCKPi N8/N10 dts(i) from Linux
|
2020-07-22 20:55:13 +08:00 |
|
rk3288-rock2-som.dtsi
|
…
|
|
|
rk3288-rock2-square.dts
|
…
|
|
|
rk3288-thermal.dtsi
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
rk3288-tinker-s-u-boot.dtsi
|
rockchip: dts: tinker: Add tinker-s board support
|
2019-11-17 18:51:25 +08:00 |
|
rk3288-tinker-s.dts
|
rockchip: dts: tinker: Add tinker-s board support
|
2019-11-17 18:51:25 +08:00 |
|
rk3288-tinker-u-boot.dtsi
|
rockchip: dts: tinker: move i2c node to shared device tree
|
2020-10-30 18:06:13 +08:00 |
|
rk3288-tinker.dts
|
rockchip: dts: tinker: remove unnecessary node
|
2020-10-30 18:06:13 +08:00 |
|
rk3288-tinker.dtsi
|
rockchip: dts: fix unnecessary '-cells' warning
|
2018-08-29 20:44:50 +02:00 |
|
rk3288-u-boot.dtsi
|
rockchip: Convert evb-rk3288 over to use binman
|
2020-07-28 19:30:39 -06:00 |
|
rk3288-veyron-chromebook.dtsi
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
rk3288-veyron-jerry.dts
|
sound: rockchip: Add sound support for jerry
|
2019-02-01 16:59:10 +01:00 |
|
rk3288-veyron-mickey.dts
|
…
|
|
|
rk3288-veyron-minnie.dts
|
rockchip: chromebook_minnie: Enable sound
|
2019-05-08 17:34:12 +08:00 |
|
rk3288-veyron-speedy-u-boot.dtsi
|
arm: dts: include gpio nodes for card detect
|
2020-07-09 22:00:29 -06:00 |
|
rk3288-veyron-speedy.dts
|
rockchip: add support for veyron-speedy (ASUS Chromebook C201)
|
2019-02-01 16:59:10 +01:00 |
|
rk3288-veyron-u-boot.dtsi
|
arm: dts: include gpio nodes for card detect
|
2020-07-09 22:00:29 -06:00 |
|
rk3288-veyron.dtsi
|
rockchip: rk3288-veyron: Migrate "u-boot, boot0" to "u-boot, spl-boot-order"
|
2019-07-29 10:25:27 +08:00 |
|
rk3288-vmarc-som.dtsi
|
arm: dts: rockchip: Add HDMI out for RockPI N8/N10
|
2020-07-22 20:55:13 +08:00 |
|
rk3288-vyasa-u-boot.dtsi
|
rockchip: dts: rk3288: move reloc tag into -u-boot dts
|
2019-07-02 11:49:49 +08:00 |
|
rk3288-vyasa.dts
|
ARM: dts: rockchip: Sync rk3288-vyasa dts from linux
|
2020-02-19 16:45:38 +08:00 |
|
rk3288.dtsi
|
ARM: dts: rockchip: Add usb host0 ohci node for rk3288
|
2020-07-22 20:55:13 +08:00 |
|
rk3308-evb-u-boot.dtsi
|
arm: dts: rockchip: Add dts for rk3308 evb
|
2019-11-17 17:22:53 +08:00 |
|
rk3308-evb.dts
|
arm: dts: rockchip: Add dts for rk3308 evb
|
2019-11-17 17:22:53 +08:00 |
|
rk3308-roc-cc-u-boot.dtsi
|
rockchip: rk3308: Add dts for ROC-RK3308-CC
|
2019-11-17 17:22:53 +08:00 |
|
rk3308-roc-cc.dts
|
dts: rk3308: Enable ethernet function supported for Firefly ROC_RK3308_CC
|
2019-12-06 00:06:23 +08:00 |
|
rk3308-u-boot.dtsi
|
rockchip: rk3308: add alias for emmc/sdmmc
|
2020-01-30 11:44:02 +08:00 |
|
rk3308.dtsi
|
arm: dts: Add mac node for rk3308 at dtsi level
|
2019-12-06 00:06:23 +08:00 |
|
rk3326-odroid-go2-u-boot.dtsi
|
rockchip: board: add Hardkernel Odroid Go2 board
|
2020-07-22 20:21:23 +08:00 |
|
rk3326-odroid-go2.dts
|
rockchip: px30: sync Odroid Go Advance devicetree from Linux
|
2020-07-22 20:21:08 +08:00 |
|
rk3326.dtsi
|
rockchip: px30: sync the main rk3326 dtsi from mainline
|
2020-07-22 20:21:01 +08:00 |
|
rk3328-evb-u-boot.dtsi
|
rockchip: dts: rk3328: Sync device tree files from Linux
|
2020-05-01 18:32:56 +08:00 |
|
rk3328-evb.dts
|
rockchip: dts: rk3328: Sync device tree files from Linux
|
2020-05-01 18:32:56 +08:00 |
|
rk3328-nanopi-r2s-u-boot.dtsi
|
rockchip: rk3328: Add support for FriendlyARM NanoPi R2S
|
2021-01-21 11:58:35 +08:00 |
|
rk3328-nanopi-r2s.dts
|
rockchip: rk3328: Add support for FriendlyARM NanoPi R2S
|
2021-01-21 11:58:35 +08:00 |
|
rk3328-roc-cc-u-boot.dtsi
|
rockchip: Use devicetree for SMBIOS settings
|
2020-11-06 10:18:20 +08:00 |
|
rk3328-roc-cc.dts
|
rockchip: rk3328: Add support for ROC-RK3328-CC board
|
2020-05-01 18:32:56 +08:00 |
|
rk3328-rock-pi-e-u-boot.dtsi
|
rockchip: Use devicetree for SMBIOS settings
|
2020-11-06 10:18:20 +08:00 |
|
rk3328-rock-pi-e.dts
|
rockchip: rk3328: add rock-pi-e dts file
|
2020-06-07 18:57:16 +08:00 |
|
rk3328-rock64-u-boot.dtsi
|
rockchip: Use devicetree for SMBIOS settings
|
2020-11-06 10:18:20 +08:00 |
|
rk3328-rock64.dts
|
rockchip: dts: rk3328: Sync device tree files from Linux
|
2020-05-01 18:32:56 +08:00 |
|
rk3328-sdram-ddr3-666.dtsi
|
ram: rk3328: use common sdram driver
|
2019-11-17 16:23:56 +08:00 |
|
rk3328-sdram-ddr4-666.dtsi
|
ram: rk3328: add support ddr4 init
|
2020-01-30 11:44:01 +08:00 |
|
rk3328-sdram-lpddr3-666.dtsi
|
ram: rk3328: update lpddr3 setting
|
2020-01-30 11:44:01 +08:00 |
|
rk3328-sdram-lpddr3-1600.dtsi
|
ram: rk3328: use common sdram driver
|
2019-11-17 16:23:56 +08:00 |
|
rk3328-u-boot.dtsi
|
ARM: dts: rk3328: Add SPI support
|
2020-07-22 20:22:07 +08:00 |
|
rk3328.dtsi
|
rockchip: dts: rk3328: Sync device tree files from Linux
|
2020-05-01 18:32:56 +08:00 |
|
rk3368-geekbox-u-boot.dtsi
|
rockchip: rk3368: sync main rk3368 dtsi from Linux
|
2021-03-30 16:53:00 +08:00 |
|
rk3368-geekbox.dts
|
…
|
|
|
rk3368-lion-haikou-u-boot.dtsi
|
rockchip: rk3368: sync down rk3368-lion board devicetree from Linux
|
2021-03-30 16:53:00 +08:00 |
|
rk3368-lion-haikou.dts
|
rockchip: rk3368: sync down rk3368-lion board devicetree from Linux
|
2021-03-30 16:53:00 +08:00 |
|
rk3368-lion.dtsi
|
rockchip: rk3368: sync down rk3368-lion board devicetree from Linux
|
2021-03-30 16:53:00 +08:00 |
|
rk3368-px5-evb-u-boot.dtsi
|
rockchip: rk3368: sync main rk3368 dtsi from Linux
|
2021-03-30 16:53:00 +08:00 |
|
rk3368-px5-evb.dts
|
…
|
|
|
rk3368-sheep-u-boot.dtsi
|
rockchip: rk3368: sync main rk3368 dtsi from Linux
|
2021-03-30 16:53:00 +08:00 |
|
rk3368-sheep.dts
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
rk3368-u-boot.dtsi
|
rockchip: rk3368: sync main rk3368 dtsi from Linux
|
2021-03-30 16:53:00 +08:00 |
|
rk3368.dtsi
|
rockchip: rk3368: sync main rk3368 dtsi from Linux
|
2021-03-30 16:53:00 +08:00 |
|
rk3399-evb-u-boot.dtsi
|
arm: dts: rockchip: rk3399: enable rng at the SoC level
|
2021-01-21 11:55:59 +08:00 |
|
rk3399-evb.dts
|
arm64: dts: rk3399: Sync v5.7-rc1 from Linux
|
2020-05-01 18:32:56 +08:00 |
|
rk3399-ficus-u-boot.dtsi
|
rockchip: Fix spl mmc boot device ofpath
|
2020-05-29 17:58:21 +08:00 |
|
rk3399-ficus.dts
|
arm64: dts: rk3399: Sync v5.7-rc1 from Linux
|
2020-05-01 18:32:56 +08:00 |
|
rk3399-firefly-u-boot.dtsi
|
rockchip: firefly-rk3399: Provide init voltage
|
2021-01-21 11:54:24 +08:00 |
|
rk3399-firefly.dts
|
arm64: dts: rk3399: Sync v5.7-rc1 from Linux
|
2020-05-01 18:32:56 +08:00 |
|
rk3399-gru-bob-u-boot.dtsi
|
arm64: rockchip: dts: rk3399: Use rk3399-u-boot.dtsi
|
2019-05-08 17:34:13 +08:00 |
|
rk3399-gru-bob.dts
|
arm64: dts: rk3399: Sync v5.7-rc1 from Linux
|
2020-05-01 18:32:56 +08:00 |
|
rk3399-gru-chromebook.dtsi
|
arm64: dts: rk3399: Sync v5.7-rc1 from Linux
|
2020-05-01 18:32:56 +08:00 |
|
rk3399-gru-kevin.dts
|
arm64: dts: rk3399: Sync v5.7-rc1 from Linux
|
2020-05-01 18:32:56 +08:00 |
|
rk3399-gru-u-boot.dtsi
|
rockchip: Enable building a SPI ROM image on bob
|
2020-07-28 19:30:39 -06:00 |
|
rk3399-gru.dtsi
|
rockchip: Enable building a SPI ROM image on bob
|
2020-07-28 19:30:39 -06:00 |
|
rk3399-khadas-edge-captain-u-boot.dtsi
|
arm64: dts: rockchip: Add support for Khadas Edge-Captain
|
2019-08-05 21:12:23 +08:00 |
|
rk3399-khadas-edge-captain.dts
|
arm64: dts: rockchip: Add support for Khadas Edge-Captain
|
2019-08-05 21:12:23 +08:00 |
|
rk3399-khadas-edge-u-boot.dtsi
|
rockchip: rk3399: khadas-edge: Add init value for vdd_log
|
2019-11-17 17:22:53 +08:00 |
|
rk3399-khadas-edge-v-u-boot.dtsi
|
arm64: dts: rockchip: Add support for Khadas Edge-V
|
2019-08-05 21:05:56 +08:00 |
|
rk3399-khadas-edge-v.dts
|
arm64: dts: rockchip: Add support for Khadas Edge-V
|
2019-08-05 21:05:56 +08:00 |
|
rk3399-khadas-edge.dts
|
arm64: dts: rockchip: Add support for Khadas Edge
|
2019-08-05 21:05:29 +08:00 |
|
rk3399-khadas-edge.dtsi
|
arm64: dts: rk3399: Sync v5.7-rc1 from Linux
|
2020-05-01 18:32:56 +08:00 |
|
rk3399-leez-p710-u-boot.dtsi
|
rockchip: leez-rk3399: Provide init voltage
|
2021-01-21 11:54:24 +08:00 |
|
rk3399-leez-p710.dts
|
arm64: dts: rk3399: Sync v5.7-rc1 from Linux
|
2020-05-01 18:32:56 +08:00 |
|
rk3399-nanopc-t4-u-boot.dtsi
|
rockchip: rk3399: Add Nanopc T4 board support
|
2019-05-09 18:24:31 +08:00 |
|
rk3399-nanopc-t4.dts
|
arm64: dts: rk3399: Sync v5.7-rc1 from Linux
|
2020-05-01 18:32:56 +08:00 |
|
rk3399-nanopi-m4-2gb-u-boot.dtsi
|
rockchip: rk3399: Add Nanopi M4 2GB board support
|
2020-05-01 18:32:56 +08:00 |
|
rk3399-nanopi-m4-2gb.dts
|
rockchip: rk3399: Add Nanopi M4 2GB board support
|
2020-05-01 18:32:56 +08:00 |
|
rk3399-nanopi-m4-u-boot.dtsi
|
rockchip: rk3399: Add Nanopi M4 board support
|
2019-05-09 18:24:31 +08:00 |
|
rk3399-nanopi-m4.dts
|
rockchip: rk3399: Add Nanopi M4 board support
|
2019-05-09 18:24:31 +08:00 |
|
rk3399-nanopi-m4b-u-boot.dtsi
|
board: dts: rockchip: Add NanoPi M4B
|
2021-03-30 16:53:00 +08:00 |
|
rk3399-nanopi-m4b.dts
|
board: dts: rockchip: Add NanoPi M4B
|
2021-03-30 16:53:00 +08:00 |
|
rk3399-nanopi-neo4-u-boot.dtsi
|
rockchip: dts: rk3399: nanopi-neo4: Use DDR3-1866 dtsi
|
2019-07-20 23:59:44 +08:00 |
|
rk3399-nanopi-neo4.dts
|
rockchip: rk3399: Add Nanopi NEO4 board support
|
2019-05-30 18:22:35 +08:00 |
|
rk3399-nanopi-r4s-u-boot.dtsi
|
arm64: rk3399: Add support NanoPi R4s
|
2021-03-30 16:53:00 +08:00 |
|
rk3399-nanopi-r4s.dts
|
arm64: rk3399: Add support NanoPi R4s
|
2021-03-30 16:53:00 +08:00 |
|
rk3399-nanopi4-u-boot.dtsi
|
arm64: dts: rk3399-nanopi4: Add u-boot,spl-boot-order
|
2020-05-29 17:58:55 +08:00 |
|
rk3399-nanopi4.dtsi
|
arm64: dts: rk3399: Sync v5.7-rc1 from Linux
|
2020-05-01 18:32:56 +08:00 |
|
rk3399-op1-opp.dtsi
|
rockchip: Bring in device tree files for rk3399-gru
|
2019-02-01 16:59:12 +01:00 |
|
rk3399-opp.dtsi
|
rockchip: dts: rk3399: Sync rk3399-opp from Linux
|
2019-05-01 00:00:04 +02:00 |
|
rk3399-orangepi-u-boot.dtsi
|
rockchip: rk3399: orangepi: Add init value for vdd_log
|
2019-11-17 17:22:53 +08:00 |
|
rk3399-orangepi.dts
|
arm64: dts: rk3399: Sync v5.7-rc1 from Linux
|
2020-05-01 18:32:56 +08:00 |
|
rk3399-pinebook-pro-u-boot.dtsi
|
rockchip: Pinebook Pro: Enable edp
|
2021-04-10 11:54:22 +02:00 |
|
rk3399-pinebook-pro.dts
|
arm: dts: rockchip: Add initial DT for Pinebook Pro
|
2020-05-31 20:46:08 +08:00 |
|
rk3399-puma-haikou-u-boot.dtsi
|
rockchip: rk3399-puma: Restore correct VDD_LOG supply.
|
2021-03-30 16:53:00 +08:00 |
|
rk3399-puma-haikou.dts
|
rockchip: puma: reorganize devicetrees to actually work and match upstream
|
2020-06-07 18:57:16 +08:00 |
|
rk3399-puma.dtsi
|
arm64: dts: rk3399-puma: fix gpio levels for vcc5v0-host regulator
|
2020-06-07 18:57:16 +08:00 |
|
rk3399-roc-pc-mezzanine-u-boot.dtsi
|
rk3399: Add ROC-RK3399-PC Mezzanine board
|
2020-05-01 18:32:56 +08:00 |
|
rk3399-roc-pc-mezzanine.dts
|
arm: dts: rk3399: Sync roc-pc-mezzanine from v5.7-rc1
|
2020-05-01 18:32:56 +08:00 |
|
rk3399-roc-pc-u-boot.dtsi
|
rockchip: rk3399-roc-pc: default to SPI bus 1 for SPI-flash
|
2021-01-21 11:53:25 +08:00 |
|
rk3399-roc-pc.dts
|
arm64: dts: rk3399: Sync v5.7-rc1 from Linux
|
2020-05-01 18:32:56 +08:00 |
|
rk3399-roc-pc.dtsi
|
arm64: dts: rk3399: Sync v5.7-rc1 from Linux
|
2020-05-01 18:32:56 +08:00 |
|
rk3399-rock-pi-4-u-boot.dtsi
|
rockchip: rk3399: rock-pi4: Add init value for vdd_log
|
2019-11-17 17:22:53 +08:00 |
|
rk3399-rock-pi-4.dtsi
|
arm64: dts: rockchip: Add ROCKPi 4A/4B support
|
2020-07-22 20:55:13 +08:00 |
|
rk3399-rock-pi-4a.dts
|
arm64: dts: rockchip: Add ROCKPi 4A/4B support
|
2020-07-22 20:55:13 +08:00 |
|
rk3399-rock-pi-4b-u-boot.dtsi
|
arm64: dts: rockchip: Add ROCKPi 4A/4B support
|
2020-07-22 20:55:13 +08:00 |
|
rk3399-rock-pi-4b.dts
|
arm64: dts: rockchip: Add ROCKPi 4A/4B support
|
2020-07-22 20:55:13 +08:00 |
|
rk3399-rock-pi-4c-u-boot.dtsi
|
arm64: dts: rockchip: Add Radxa ROCK Pi 4C support
|
2020-07-22 20:55:13 +08:00 |
|
rk3399-rock-pi-4c.dts
|
arm64: dts: rockchip: Add Radxa ROCK Pi 4C support
|
2020-07-22 20:55:13 +08:00 |
|
rk3399-rock960-u-boot.dtsi
|
rockchip: Fix spl mmc boot device ofpath
|
2020-05-29 17:58:21 +08:00 |
|
rk3399-rock960.dts
|
arm64: dts: rk3399: Sync v5.7-rc1 from Linux
|
2020-05-01 18:32:56 +08:00 |
|
rk3399-rock960.dtsi
|
arm64: dts: rk3399: Sync v5.7-rc1 from Linux
|
2020-05-01 18:32:56 +08:00 |
|
rk3399-rockpro64-u-boot.dtsi
|
arm: dts: rockchip: rk3399: enable rng at the SoC level
|
2021-01-21 11:55:59 +08:00 |
|
rk3399-rockpro64.dts
|
arm64: dts: rk3399: Sync v5.7-rc1 from Linux
|
2020-05-01 18:32:56 +08:00 |
|
rk3399-rockpro64.dtsi
|
arm64: dts: rk3399: Sync v5.7-rc1 from Linux
|
2020-05-01 18:32:56 +08:00 |
|
rk3399-sdram-ddr3-1333.dtsi
|
ram: rk3399: migrate to use common code
|
2019-11-17 16:23:56 +08:00 |
|
rk3399-sdram-ddr3-1600.dtsi
|
ram: rk3399: migrate to use common code
|
2019-11-17 16:23:56 +08:00 |
|
rk3399-sdram-ddr3-1866.dtsi
|
ram: rk3399: migrate to use common code
|
2019-11-17 16:23:56 +08:00 |
|
rk3399-sdram-lpddr3-2GB-1600.dtsi
|
ram: rk3399: migrate to use common code
|
2019-11-17 16:23:56 +08:00 |
|
rk3399-sdram-lpddr3-4GB-1600.dtsi
|
ram: rk3399: migrate to use common code
|
2019-11-17 16:23:56 +08:00 |
|
rk3399-sdram-lpddr3-samsung-4GB-1866.dtsi
|
ram: rk3399: migrate to use common code
|
2019-11-17 16:23:56 +08:00 |
|
rk3399-sdram-lpddr4-100.dtsi
|
ram: rk3399: migrate to use common code
|
2019-11-17 16:23:56 +08:00 |
|
rk3399-u-boot.dtsi
|
arm: dts: rockchip: rk3399: enable rng at the SoC level
|
2021-01-21 11:55:59 +08:00 |
|
rk3399.dtsi
|
arm64: dts: rk3399: Sync v5.7-rc1 from Linux
|
2020-05-01 18:32:56 +08:00 |
|
rk3399pro-rock-pi-n10-u-boot.dtsi
|
arm64: dts: rockchip: Add u-boot, spl-boot-order for ROCKPi N10
|
2020-07-22 20:55:13 +08:00 |
|
rk3399pro-rock-pi-n10.dts
|
ARM: dts: rockchip: Sync ROCKPi N8/N10 dts(i) from Linux
|
2020-07-22 20:55:13 +08:00 |
|
rk3399pro-u-boot.dtsi
|
arm64: dts: rockchip: Add Radxa Rock Pi N10 initial support
|
2020-07-07 19:45:57 +08:00 |
|
rk3399pro-vmarc-som.dtsi
|
arm64: dts: rockchip: Add PCIe for RockPI N10
|
2020-07-22 20:55:13 +08:00 |
|
rk3399pro.dtsi
|
arm64: dts: rockchip: Sync v5.7-rc1 rk3399pro.dtsi
|
2020-07-07 19:45:57 +08:00 |
|
rockchip-optee.dtsi
|
rockchip: Convert evb-rk3288 over to use binman
|
2020-07-28 19:30:39 -06:00 |
|
rockchip-radxa-dalang-carrier.dtsi
|
arm: dts: rockchip: Add HDMI out for RockPI N8/N10
|
2020-07-22 20:55:13 +08:00 |
|
rockchip-u-boot.dtsi
|
mediatek: Makefile: Drop explicit targets built by binman
|
2020-07-28 19:30:39 -06:00 |
|
rv1108-elgin-r1.dts
|
ARM: dts: Activate pullups in the console pins on rv1108-elgin-r1
|
2020-03-26 22:58:46 +08:00 |
|
rv1108-evb.dts
|
dts: switch spi-flash to jedec, spi-nor compatible
|
2019-04-12 10:54:27 +05:30 |
|
rv1108-u-boot.dtsi
|
rockchip: rv1108: Enable grf as pre-reloc node
|
2020-09-16 16:31:18 +08:00 |
|
rv1108.dtsi
|
ARM: dts: rockchip: Add rv1108 USB OTG pinctrl
|
2018-11-30 21:56:45 +01:00 |
|
s5p4418-nanopi2.dts
|
arm: add support for SoC s5p4418 (cpu) / nanopi2 board
|
2020-07-29 08:43:40 -04:00 |
|
s5p4418-pinctrl.dtsi
|
arm: add support for SoC s5p4418 (cpu) / nanopi2 board
|
2020-07-29 08:43:40 -04:00 |
|
s5p4418.dtsi
|
arm: add support for SoC s5p4418 (cpu) / nanopi2 board
|
2020-07-29 08:43:40 -04:00 |
|
s5pc1xx-goni.dts
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
s5pc1xx-smdkc100.dts
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
s5pc100-pinctrl.dtsi
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
s5pc110-pinctrl.dtsi
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
s700-cubieboard7.dts
|
arm: add Cubieboard7 board support
|
2020-04-24 16:40:09 -04:00 |
|
s700-u-boot.dtsi
|
arm: dts: s700: add node for ethernet controller
|
2020-07-07 17:12:01 -04:00 |
|
s700.dtsi
|
arm: actions: add S700 SoC device tree
|
2020-04-24 16:40:09 -04:00 |
|
s900-u-boot.dtsi
|
arm: dts: actions: s900: add u-boot specific dtsi file
|
2020-04-24 16:40:09 -04:00 |
|
s900.dtsi
|
arm: dts: sync dts for Action Semi S900
|
2020-04-24 16:40:09 -04:00 |
|
salvator-common.dtsi
|
ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
salvator-x.dtsi
|
ARM: dts: rmobile: Sync Gen3 DTs with Linux 4.19.6
|
2018-12-04 09:21:07 +01:00 |
|
salvator-xs.dtsi
|
ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
sam9x60.dtsi
|
ARM: dts: at91: sam9x60: enable slewrate/high drive for sdhci0 pinout
|
2020-11-26 10:12:47 +02:00 |
|
sam9x60ek-u-boot.dtsi
|
ARM: dts: sam9x60: use alphabetical order
|
2020-10-19 09:19:53 +03:00 |
|
sam9x60ek.dts
|
ARM: dts: sam9x60: use CCF compatibles for PMC
|
2020-10-19 09:19:53 +03:00 |
|
sama5d2-pinfunc.h
|
…
|
|
|
sama5d2.dtsi
|
ARM: dts: sama5d2: Add uart4 definition
|
2020-05-18 15:00:20 +03:00 |
|
sama5d3.dtsi
|
ARM: dts: at91: sama5d3: add u-boot properties to sama5d3 pit timer
|
2021-04-19 10:38:52 +03:00 |
|
sama5d3_can.dtsi
|
…
|
|
|
sama5d3_emac.dtsi
|
…
|
|
|
sama5d3_gmac.dtsi
|
…
|
|
|
sama5d3_lcd.dtsi
|
…
|
|
|
sama5d3_mci2.dtsi
|
…
|
|
|
sama5d3_tcb1.dtsi
|
…
|
|
|
sama5d3_uart.dtsi
|
…
|
|
|
sama5d3xcm.dtsi
|
net: phy: micrel: Use correct skew values on KSZ9021
|
2019-05-08 17:27:01 -05:00 |
|
sama5d3xcm_cmp.dtsi
|
net: phy: micrel: Use correct skew values on KSZ9021
|
2019-05-08 17:27:01 -05:00 |
|
sama5d3xdm.dtsi
|
…
|
|
|
sama5d3xmb.dtsi
|
ARM: dts: at91: sama5d3xmb: fix I2C bus unit address
|
2020-11-02 08:58:38 +02:00 |
|
sama5d3xmb_cmp.dtsi
|
ARM: dts: at91: sama5d3xmb_cmp: fix SPI bus unit address
|
2020-11-02 08:58:38 +02:00 |
|
sama5d4.dtsi
|
ARM: dts: sama5d4: fix gadget endpoint address warning
|
2020-06-18 14:28:37 +03:00 |
|
sama5d27_som1.dtsi
|
dts: switch spi-flash to jedec, spi-nor compatible
|
2019-04-12 10:54:27 +05:30 |
|
sama5d27_wlsom1.dtsi
|
ARM: dts: at91: sama5d27_wlsom1_ek: add support for qspi
|
2019-10-08 09:16:11 +03:00 |
|
sama5d31.dtsi
|
…
|
|
|
sama5d31ek.dts
|
…
|
|
|
sama5d33.dtsi
|
…
|
|
|
sama5d33ek.dts
|
…
|
|
|
sama5d34.dtsi
|
…
|
|
|
sama5d34ek.dts
|
…
|
|
|
sama5d35.dtsi
|
…
|
|
|
sama5d35ek.dts
|
…
|
|
|
sama5d36.dtsi
|
…
|
|
|
sama5d36ek.dts
|
…
|
|
|
sama5d36ek_cmp.dts
|
…
|
|
|
sama7g5-pinfunc.h
|
ARM: mach-at91: add support for new SoC sama7g5
|
2020-09-25 10:39:22 +03:00 |
|
sama7g5.dtsi
|
ARM: dts: at91: sama7g5: change pinctrl compatible to sama7g5
|
2021-04-19 10:38:49 +03:00 |
|
sama7g5ek-u-boot.dtsi
|
ARM: dts: at91: sama7g5ek: add pinctrl for sdmmc1 and flx3
|
2021-01-07 09:44:15 +02:00 |
|
sama7g5ek.dts
|
ARM: dts: at91: sama7g5ek: enable pull-up for serial debug line
|
2021-02-11 09:26:40 +02:00 |
|
skeleton.dtsi
|
…
|
|
|
skeleton64.dtsi
|
…
|
|
|
socfpga-common-u-boot.dtsi
|
arm: dts: socfpga: Add u-boot, dm-pre-reloc for sysmgr and clkmgr nodes
|
2020-01-07 14:38:33 +01:00 |
|
socfpga.dtsi
|
spi: dw: Add SoC-specific compatible strings
|
2020-12-18 16:16:37 +05:30 |
|
socfpga_agilex-u-boot.dtsi
|
arm: socfpga: dts: soc64: Add binman node of FIT image with ATF support
|
2021-01-15 17:48:38 +08:00 |
|
socfpga_agilex.dtsi
|
spi: dw: Add SoC-specific compatible strings
|
2020-12-18 16:16:37 +05:30 |
|
socfpga_agilex_socdk-u-boot.dtsi
|
arm: socfpga: Use DM watchdog timer
|
2020-10-09 17:53:12 +08:00 |
|
socfpga_agilex_socdk.dts
|
arm: dts: agilex: Add base dtsi and devkit dts
|
2020-01-07 14:38:34 +01:00 |
|
socfpga_arria5.dtsi
|
dts: arm: socfpga: merge gen5 devicetrees from linux
|
2018-11-29 12:45:15 +01:00 |
|
socfpga_arria5_secu1.dts
|
km: fix license string and compatible strings
|
2020-10-22 09:54:54 -04:00 |
|
socfpga_arria5_socdk-u-boot.dtsi
|
arm: socfpga: gen5: add reset & sdr node to SPL devicetrees
|
2019-04-17 22:20:16 +02:00 |
|
socfpga_arria5_socdk.dts
|
net: phy: micrel: Use correct skew values on KSZ9021
|
2019-05-08 17:27:01 -05:00 |
|
socfpga_arria10-handoff.dtsi
|
arm: dts: socfpga: arria10: Move to use generic handoff dtsi
|
2020-10-09 17:53:14 +08:00 |
|
socfpga_arria10-u-boot.dtsi
|
arm: socfpga: arria10: Enable cache driver in SPL
|
2020-04-13 13:49:51 +02:00 |
|
socfpga_arria10.dtsi
|
spi: dw: Add SoC-specific compatible strings
|
2020-12-18 16:16:37 +05:30 |
|
socfpga_arria10_handoff_u-boot.dtsi
|
ARM: dts: socfpga: Keep FPGA bridge entries in SPL DT
|
2019-05-14 19:53:16 +02:00 |
|
socfpga_arria10_socdk-u-boot.dtsi
|
arm: socfpga: Use DM watchdog timer
|
2020-10-09 17:53:12 +08:00 |
|
socfpga_arria10_socdk.dtsi
|
arm: dts: arria10: Update dtsi/dts from Linux
|
2020-04-13 13:49:51 +02:00 |
|
socfpga_arria10_socdk_sdmmc-u-boot.dtsi
|
arm: dts: socfpga: arria10: Move to use generic handoff dtsi
|
2020-10-09 17:53:14 +08:00 |
|
socfpga_arria10_socdk_sdmmc.dts
|
arm: dts: arria10: Update dtsi/dts from Linux
|
2020-04-13 13:49:51 +02:00 |
|
socfpga_arria10_socdk_sdmmc_handoff.h
|
arm: socfpga: arria10: Add handoff header for A10 SoCDK SDMMC
|
2020-10-09 17:53:14 +08:00 |
|
socfpga_cyclone5.dtsi
|
dts: arm: socfpga: merge gen5 devicetrees from linux
|
2018-11-29 12:45:15 +01:00 |
|
socfpga_cyclone5_dbm_soc1.dts
|
arm: socfpga: gen5: add reset & sdr node to SPL devicetrees
|
2019-04-17 22:20:16 +02:00 |
|
socfpga_cyclone5_de0_nano_soc-u-boot.dtsi
|
arm: socfpga: gen5: add reset & sdr node to SPL devicetrees
|
2019-04-17 22:20:16 +02:00 |
|
socfpga_cyclone5_de0_nano_soc.dts
|
dts: arm: socfpga: merge gen5 devicetrees from linux
|
2018-11-29 12:45:15 +01:00 |
|
socfpga_cyclone5_de1_soc.dts
|
arm: socfpga: gen5: add reset & sdr node to SPL devicetrees
|
2019-04-17 22:20:16 +02:00 |
|
socfpga_cyclone5_de10_nano.dts
|
dts: arm: socfpga: fix socfpga_de10_nano console
|
2019-04-29 20:33:23 +02:00 |
|
socfpga_cyclone5_is1.dts
|
net: phy: micrel: Use correct skew values on KSZ9021
|
2019-05-08 17:27:01 -05:00 |
|
socfpga_cyclone5_mcv.dtsi
|
arm: socfpga: Re-add support for Aries MCV SoM and MCVEV[KP] board
|
2019-05-14 19:52:39 +02:00 |
|
socfpga_cyclone5_mcvevk-u-boot.dtsi
|
arm: socfpga: Re-add support for Aries MCV SoM and MCVEV[KP] board
|
2019-05-14 19:52:39 +02:00 |
|
socfpga_cyclone5_mcvevk.dts
|
arm: socfpga: Re-add support for Aries MCV SoM and MCVEV[KP] board
|
2019-05-14 19:52:39 +02:00 |
|
socfpga_cyclone5_socdk-u-boot.dtsi
|
arm: dts: socfpga: cyclone5: Update i2c-scl-falling-time-ns
|
2020-06-14 13:37:31 +02:00 |
|
socfpga_cyclone5_socdk.dts
|
net: phy: micrel: Use correct skew values on KSZ9021
|
2019-05-08 17:27:01 -05:00 |
|
socfpga_cyclone5_sockit-u-boot.dtsi
|
arm: socfpga: gen5: add reset & sdr node to SPL devicetrees
|
2019-04-17 22:20:16 +02:00 |
|
socfpga_cyclone5_sockit.dts
|
net: phy: micrel: Use correct skew values on KSZ9021
|
2019-05-08 17:27:01 -05:00 |
|
socfpga_cyclone5_socrates-u-boot.dtsi
|
arm: socfpga: gen5: add reset & sdr node to SPL devicetrees
|
2019-04-17 22:20:16 +02:00 |
|
socfpga_cyclone5_socrates.dts
|
arm: socfpga: gen5: sync devicetrees to Linux
|
2019-04-17 22:20:15 +02:00 |
|
socfpga_cyclone5_sr1500.dts
|
arm: socfpga: gen5: add reset & sdr node to SPL devicetrees
|
2019-04-17 22:20:16 +02:00 |
|
socfpga_cyclone5_vining_fpga-u-boot.dtsi
|
watchdog: designware: Convert to DM and DT probing
|
2020-02-05 03:01:57 +01:00 |
|
socfpga_cyclone5_vining_fpga.dts
|
ARM: socfpga: vining_fpga: Update DT
|
2019-10-09 22:54:18 +02:00 |
|
socfpga_soc64_fit-u-boot.dtsi
|
arm: socfpga: Enable FIT signature with crc32 for SOC64 devices
|
2021-04-08 17:29:13 +08:00 |
|
socfpga_stratix10-u-boot.dtsi
|
arm: socfpga: dts: soc64: Add binman node of FIT image with ATF support
|
2021-01-15 17:48:38 +08:00 |
|
socfpga_stratix10.dtsi
|
spi: dw: Add SoC-specific compatible strings
|
2020-12-18 16:16:37 +05:30 |
|
socfpga_stratix10_socdk-u-boot.dtsi
|
arm: socfpga: dts: soc64: Add binman node of FIT image with ATF support
|
2021-01-15 17:48:38 +08:00 |
|
socfpga_stratix10_socdk.dts
|
arm: socfpga: stratix10: Add alias for gmac0 in S10 dts
|
2019-11-22 03:08:12 +01:00 |
|
st-pincfg.h
|
ARM: dts: stm32: DT alignment with kernel v5.4-rc4
|
2019-11-26 10:11:48 +01:00 |
|
ste-ab8500.dtsi
|
arm: dts: Import device tree for ST-Ericsson Ux500
|
2020-01-22 17:47:57 -05:00 |
|
ste-ab8505.dtsi
|
arm: dts: Import device tree for ST-Ericsson Ux500
|
2020-01-22 17:47:57 -05:00 |
|
ste-dbx5x0-u-boot.dtsi
|
arm: Add support for ST-Ericsson U8500 SoC
|
2020-01-22 17:47:57 -05:00 |
|
ste-dbx5x0.dtsi
|
arm: dts: Import device tree for ST-Ericsson Ux500
|
2020-01-22 17:47:57 -05:00 |
|
ste-ux500-samsung-stemmy.dts
|
board: Add new Samsung "stemmy" board based on ST-Ericsson U8500
|
2020-01-22 17:47:57 -05:00 |
|
stih407-clock.dtsi
|
ARM: dts: stih410-b2260: Sync DT with kernel v5.2
|
2019-08-27 09:36:56 +02:00 |
|
stih407-family.dtsi
|
ARM: dts: stih410-b2260: Sync DT with kernel v5.2
|
2019-08-27 09:36:56 +02:00 |
|
stih407-pinctrl.dtsi
|
ARM: dts: stih410-b2260: Sync DT with kernel v5.2
|
2019-08-27 09:36:56 +02:00 |
|
stih410-b2260-u-boot.dtsi
|
MAINTAINERS: Update STi and STM32 maintainers emails in remaining files
|
2021-01-13 09:52:58 +01:00 |
|
stih410-b2260.dts
|
MAINTAINERS: Update STi and STM32 maintainers emails in remaining files
|
2021-01-13 09:52:58 +01:00 |
|
stih410-clock.dtsi
|
ARM: dts: stih410-b2260: Sync DT with kernel v5.2
|
2019-08-27 09:36:56 +02:00 |
|
stih410-pinctrl.dtsi
|
ARM: dts: stih410-b2260: Sync DT with kernel v5.2
|
2019-08-27 09:36:56 +02:00 |
|
stih410.dtsi
|
ARM: dts: stih410-b2260: Sync DT with kernel v5.2
|
2019-08-27 09:36:56 +02:00 |
|
stm32f4-pinctrl.dtsi
|
ARM: dts: stm32: DT sync with kernel v5.10-rc1 for MCU's boards
|
2020-11-25 10:29:23 +01:00 |
|
stm32f7-pinctrl.dtsi
|
ARM: dts: stm32: DT sync with kernel v5.10-rc1 for MCU's boards
|
2020-11-25 10:29:23 +01:00 |
|
stm32f7-u-boot.dtsi
|
ARM: dts: stm32: DT sync with kernel v5.10-rc1 for MCU's boards
|
2020-11-25 10:29:23 +01:00 |
|
stm32f429-disco-u-boot.dtsi
|
MAINTAINERS: Update STi and STM32 maintainers emails in remaining files
|
2021-01-13 09:52:58 +01:00 |
|
stm32f429-disco.dts
|
ARM: dts: stm32: DT sync with kernel v5.10-rc1 for MCU's boards
|
2020-11-25 10:29:23 +01:00 |
|
stm32f429-pinctrl.dtsi
|
ARM: dts: stm32: DT alignment with kernel v5.3
|
2019-11-26 10:11:48 +01:00 |
|
stm32f429.dtsi
|
ARM: dts: stm32: DT sync with kernel v5.10-rc1 for MCU's boards
|
2020-11-25 10:29:23 +01:00 |
|
stm32f469-disco-u-boot.dtsi
|
MAINTAINERS: Update STi and STM32 maintainers emails in remaining files
|
2021-01-13 09:52:58 +01:00 |
|
stm32f469-disco.dts
|
ARM: dts: stm32: DT sync with kernel v5.10-rc1 for MCU's boards
|
2020-11-25 10:29:23 +01:00 |
|
stm32f469-pinctrl.dtsi
|
ARM: dts: stm32: DT alignment with kernel v5.3
|
2019-11-26 10:11:48 +01:00 |
|
stm32f469.dtsi
|
ARM: dts: stm32: DT sync with kernel v5.10-rc1 for MCU's boards
|
2020-11-25 10:29:23 +01:00 |
|
stm32f746-disco-u-boot.dtsi
|
ARM: dts: stm32: Fix timer initialization for stm32 MCU's board
|
2020-11-25 10:29:23 +01:00 |
|
stm32f746-disco.dts
|
ARM: dts: stm32: DT sync with kernel v5.10-rc1 for MCU's boards
|
2020-11-25 10:29:23 +01:00 |
|
stm32f746-pinctrl.dtsi
|
ARM: dts: stm32: Sync DT with v4.20 kernel for stm32f7
|
2019-04-23 15:31:06 +02:00 |
|
stm32f746.dtsi
|
ARM: dts: stm32: DT sync with kernel v5.10-rc1 for MCU's boards
|
2020-11-25 10:29:23 +01:00 |
|
stm32f769-disco-u-boot.dtsi
|
ARM: dts: stm32: DT sync with kernel v5.10-rc1 for MCU's boards
|
2020-11-25 10:29:23 +01:00 |
|
stm32f769-disco.dts
|
ARM: dts: stm32: DT sync with kernel v5.10-rc1 for MCU's boards
|
2020-11-25 10:29:23 +01:00 |
|
stm32f769-pinctrl.dtsi
|
ARM: dts: stm32: Sync DT with v4.20 kernel for stm32f7
|
2019-04-23 15:31:06 +02:00 |
|
stm32h7-pinctrl.dtsi
|
ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6
|
2021-04-09 11:53:00 +02:00 |
|
stm32h7-u-boot.dtsi
|
ARM: dts: stm32: split sdram pin & timing parameter into specific board dts
|
2021-04-09 11:53:00 +02:00 |
|
stm32h743.dtsi
|
ARM: dts: stm32: fix i2c node typo in stm32h743, update dmamux1 register
|
2021-04-09 11:53:00 +02:00 |
|
stm32h743i-disco-u-boot.dtsi
|
ARM: dts: stm32: split sdram pin & timing parameter into specific board dts
|
2021-04-09 11:53:00 +02:00 |
|
stm32h743i-disco.dts
|
ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750
|
2021-04-09 11:53:00 +02:00 |
|
stm32h743i-eval-u-boot.dtsi
|
ARM: dts: stm32: split sdram pin & timing parameter into specific board dts
|
2021-04-09 11:53:00 +02:00 |
|
stm32h743i-eval.dts
|
ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750
|
2021-04-09 11:53:00 +02:00 |
|
stm32h750.dtsi
|
ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6
|
2021-04-09 11:53:00 +02:00 |
|
stm32h750i-art-pi-u-boot.dtsi
|
ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6
|
2021-04-09 11:53:00 +02:00 |
|
stm32h750i-art-pi.dts
|
ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6
|
2021-04-09 11:53:00 +02:00 |
|
stm32mp15-ddr.dtsi
|
ARM: dts: stm32: Rework DDR DT inclusion
|
2020-05-14 09:02:12 +02:00 |
|
stm32mp15-ddr3-1x4Gb-1066-binG.dtsi
|
ARM: dts: stm32: Fix cosmetic typo: use 'kHz' as kilohertz abbreviation
|
2021-02-09 10:35:39 +01:00 |
|
stm32mp15-ddr3-2x4Gb-1066-binG.dtsi
|
ARM: dts: stm32: Fix cosmetic typo: use 'kHz' as kilohertz abbreviation
|
2021-02-09 10:35:39 +01:00 |
|
stm32mp15-ddr3-dhsom-2x1Gb-1066-binG.dtsi
|
ARM: dts: stm32: Synchronize DDR setttings on DH SoMs
|
2020-05-14 09:02:12 +02:00 |
|
stm32mp15-ddr3-dhsom-2x2Gb-1066-binG.dtsi
|
ARM: dts: stm32: Synchronize DDR setttings on DH SoMs
|
2020-05-14 09:02:12 +02:00 |
|
stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi
|
ARM: dts: stm32: Synchronize DDR setttings on DH SoMs
|
2020-05-14 09:02:12 +02:00 |
|
stm32mp15-ddr3-icore-1x4Gb-1066-binG.dtsi
|
ARM: dts: stm32: Add Engicam i.Core STM32MP1 1X4Gb DDR3
|
2021-04-09 11:53:00 +02:00 |
|
stm32mp15-pinctrl.dtsi
|
arm: dts: stm32mp15: remove duplicate uart nodes
|
2021-02-26 15:44:58 +01:00 |
|
stm32mp15-u-boot.dtsi
|
usb: dwc2: change compatible st,stm32mp1-hsotg to st,stm32mp15-hsotg
|
2021-02-10 22:23:35 +01:00 |
|
stm32mp15xc.dtsi
|
ARM: dts: stm32mp1: DT alignment with Linux 5.6-rc1
|
2020-03-24 14:18:36 +01:00 |
|
stm32mp15xx-dhcom-drc02-u-boot.dtsi
|
ARM: dts: stm32: Add DHSOM based DRC02 board
|
2020-07-28 18:35:01 +02:00 |
|
stm32mp15xx-dhcom-drc02.dts
|
ARM: dts: stm32: Fix GPIO hog flags on DHCOM DRC02
|
2021-01-06 11:01:31 +01:00 |
|
stm32mp15xx-dhcom-pdk2-u-boot.dtsi
|
ARM: dts: stm32: Add DH Electronics DHCOM SoM and PDK2 board
|
2020-02-12 19:48:39 +01:00 |
|
stm32mp15xx-dhcom-pdk2.dts
|
ARM: dts: stm32: Move ethernet PHY into SoM DT
|
2020-07-28 18:35:01 +02:00 |
|
stm32mp15xx-dhcom-picoitx-u-boot.dtsi
|
ARM: dts: stm32: Add DHCOM based PicoITX board
|
2020-11-25 10:43:46 +01:00 |
|
stm32mp15xx-dhcom-picoitx.dts
|
ARM: dts: stm32: Fix GPIO hog flags on DHCOM PicoITX
|
2021-01-06 11:01:31 +01:00 |
|
stm32mp15xx-dhcom-u-boot.dtsi
|
arm: dts: stm32mp15: alignment with v5.11-rc2
|
2021-02-09 10:56:06 +01:00 |
|
stm32mp15xx-dhcom.dtsi
|
ARM: dts: stm32: Switch to MCO2 for PHY 50 MHz clock
|
2021-01-13 09:52:58 +01:00 |
|
stm32mp15xx-dhcor-avenger96-u-boot.dtsi
|
ARM: dts: stm32: Pull UART4 RX high on AV96
|
2020-09-09 15:01:53 +02:00 |
|
stm32mp15xx-dhcor-avenger96.dts
|
ARM: dts: stm32: Add USB OTG ID pin on DH AV96
|
2020-12-09 10:57:50 +01:00 |
|
stm32mp15xx-dhcor-io1v8.dtsi
|
ARM: dts: stm32: Fix AV96 and DHCOR split
|
2020-05-14 09:02:12 +02:00 |
|
stm32mp15xx-dhcor-io3v3.dtsi
|
ARM: dts: stm32mp1: DT alignment with Linux 5.7-rc2
|
2020-05-14 09:02:12 +02:00 |
|
stm32mp15xx-dhcor-u-boot.dtsi
|
ARM: dts: stm32: Add missing dm-spl props for SPI NOR on AV96
|
2020-10-02 14:18:00 +02:00 |
|
stm32mp15xx-dkx.dtsi
|
arm: dts: stm32mp15: alignment with v5.11-rc2
|
2021-02-09 10:56:06 +01:00 |
|
stm32mp15xxaa-pinctrl.dtsi
|
ARM: dts: stm32mp1: DT alignment with Linux 5.6-rc1
|
2020-03-24 14:18:36 +01:00 |
|
stm32mp15xxab-pinctrl.dtsi
|
ARM: dts: stm32mp1: DT alignment with Linux 5.6-rc1
|
2020-03-24 14:18:36 +01:00 |
|
stm32mp15xxac-pinctrl.dtsi
|
ARM: dts: stm32mp1: DT alignment with Linux 5.6-rc1
|
2020-03-24 14:18:36 +01:00 |
|
stm32mp15xxad-pinctrl.dtsi
|
ARM: dts: stm32mp1: DT alignment with Linux 5.6-rc1
|
2020-03-24 14:18:36 +01:00 |
|
stm32mp151.dtsi
|
ARM: dts: stm32mp1: explicit clock reference needed by RCC clock driver
|
2021-03-11 17:03:19 +01:00 |
|
stm32mp153.dtsi
|
arm: dts: stm32mp15: alignment with v5.11-rc2
|
2021-02-09 10:56:06 +01:00 |
|
stm32mp157.dtsi
|
ARM: dts: stm32mp1: DT alignment with Linux kernel v5.8-rc1
|
2020-07-28 18:06:45 +02:00 |
|
stm32mp157a-avenger96.dts
|
ARM: dts: stm32: Split AV96 into DHCOR SoM and AV96 board
|
2020-04-24 15:52:48 +02:00 |
|
stm32mp157a-dk1-u-boot.dtsi
|
Revert "ARM: dts: stm32: Reinstate card detect behavior on ST boards"
|
2020-07-28 18:15:23 +02:00 |
|
stm32mp157a-dk1.dts
|
ARM: dts: stm32mp1: DT alignment with Linux kernel v5.9-rc4
|
2020-10-02 14:56:56 +02:00 |
|
stm32mp157a-icore-stm32mp1-ctouch2-u-boot.dtsi
|
board: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0
|
2021-04-09 11:53:00 +02:00 |
|
stm32mp157a-icore-stm32mp1-ctouch2.dts
|
board: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0
|
2021-04-09 11:53:00 +02:00 |
|
stm32mp157a-icore-stm32mp1-edimm2.2-u-boot.dtsi
|
board: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit
|
2021-04-09 11:53:00 +02:00 |
|
stm32mp157a-icore-stm32mp1-edimm2.2.dts
|
board: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit
|
2021-04-09 11:53:00 +02:00 |
|
stm32mp157a-icore-stm32mp1-u-boot.dtsi
|
board: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit
|
2021-04-09 11:53:00 +02:00 |
|
stm32mp157a-icore-stm32mp1.dtsi
|
ARM: dts: stm32: Add Engicam i.Core STM32MP1 SoM
|
2021-04-09 11:53:00 +02:00 |
|
stm32mp157a-microgea-stm32mp1-microdev2.0-of7-u-boot.dtsi
|
board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 7" OF
|
2021-04-09 11:53:00 +02:00 |
|
stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
|
board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 7" OF
|
2021-04-09 11:53:00 +02:00 |
|
stm32mp157a-microgea-stm32mp1-microdev2.0-u-boot.dtsi
|
board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 board
|
2021-04-09 11:53:00 +02:00 |
|
stm32mp157a-microgea-stm32mp1-microdev2.0.dts
|
board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 board
|
2021-04-09 11:53:00 +02:00 |
|
stm32mp157a-microgea-stm32mp1-u-boot.dtsi
|
board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 board
|
2021-04-09 11:53:00 +02:00 |
|
stm32mp157a-microgea-stm32mp1.dtsi
|
ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 Micro SoM
|
2021-04-09 11:53:00 +02:00 |
|
stm32mp157c-dk2-u-boot.dtsi
|
ARM: dts: stm32mp1: DT alignment with Linux 5.6-rc1
|
2020-03-24 14:18:36 +01:00 |
|
stm32mp157c-dk2.dts
|
arm: dts: stm32mp15: alignment with v5.11-rc2
|
2021-02-09 10:56:06 +01:00 |
|
stm32mp157c-ed1-u-boot.dtsi
|
Revert "ARM: dts: stm32: Reinstate card detect behavior on ST boards"
|
2020-07-28 18:15:23 +02:00 |
|
stm32mp157c-ed1.dts
|
arm: dts: stm32mp15: alignment with v5.11-rc2
|
2021-02-09 10:56:06 +01:00 |
|
stm32mp157c-ev1-u-boot.dtsi
|
video: stm32: remove the compatible "synopsys, dw-mipi-dsi" support
|
2019-11-12 16:15:53 +01:00 |
|
stm32mp157c-ev1.dts
|
arm: dts: stm32mp15: alignment with v5.11-rc2
|
2021-02-09 10:56:06 +01:00 |
|
stm32mp157c-odyssey-som-u-boot.dtsi
|
ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board
|
2020-07-28 18:35:01 +02:00 |
|
stm32mp157c-odyssey-som.dtsi
|
arm: dts: stm32mp157c-odyssey-som: enable the RNG1
|
2021-05-28 15:05:39 +02:00 |
|
stm32mp157c-odyssey-u-boot.dtsi
|
ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board
|
2020-07-28 18:35:01 +02:00 |
|
stm32mp157c-odyssey.dts
|
ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board
|
2020-07-28 18:35:01 +02:00 |
|
stm32429i-eval-u-boot.dtsi
|
MAINTAINERS: Update STi and STM32 maintainers emails in remaining files
|
2021-01-13 09:52:58 +01:00 |
|
stm32429i-eval.dts
|
ARM: dts: stm32: DT sync with kernel v5.10-rc1 for MCU's boards
|
2020-11-25 10:29:23 +01:00 |
|
stm32746g-eval-u-boot.dtsi
|
ARM: dts: stm32: DT sync with kernel v5.10-rc1 for MCU's boards
|
2020-11-25 10:29:23 +01:00 |
|
stm32746g-eval.dts
|
ARM: dts: stm32: DT sync with kernel v5.10-rc1 for MCU's boards
|
2020-11-25 10:29:23 +01:00 |
|
stv0991.dts
|
dts: switch spi-flash to jedec, spi-nor compatible
|
2019-04-12 10:54:27 +05:30 |
|
sun4i-a10-a1000.dts
|
ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun4i-a10-ba10-tvbox.dts
|
ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun4i-a10-chuwi-v7-cw0825.dts
|
ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun4i-a10-cubieboard.dts
|
ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun4i-a10-dserve-dsrv9703c.dts
|
ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun4i-a10-gemei-g9.dts
|
ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun4i-a10-hackberry.dts
|
ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun4i-a10-hyundai-a7hd.dts
|
ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun4i-a10-inet-3f.dts
|
ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun4i-a10-inet-3w.dts
|
ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun4i-a10-inet1.dts
|
ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun4i-a10-inet9f-rev03.dts
|
ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun4i-a10-inet97fv2.dts
|
ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun4i-a10-itead-iteaduino-plus.dts
|
ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun4i-a10-jesurun-q5.dts
|
ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun4i-a10-marsboard.dts
|
ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun4i-a10-mini-xplus.dts
|
ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun4i-a10-mk802.dts
|
ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun4i-a10-mk802ii.dts
|
ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun4i-a10-olinuxino-lime.dts
|
ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun4i-a10-pcduino.dts
|
ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun4i-a10-pcduino2.dts
|
ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun4i-a10-pov-protab2-ips9.dts
|
ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun4i-a10.dtsi
|
ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun5i-a10s-auxtek-t003.dts
|
ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun5i-a10s-auxtek-t004.dts
|
ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun5i-a10s-mk802.dts
|
ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun5i-a10s-olinuxino-micro.dts
|
ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun5i-a10s-r7-tv-dongle.dts
|
ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun5i-a10s-wobo-i5.dts
|
ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun5i-a10s.dtsi
|
ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun5i-a13-ampe-a76.dts
|
SPDX: Convert all of our multiple license tags to Linux Kernel style
|
2018-05-07 10:24:31 -04:00 |
|
sun5i-a13-difrnce-dit4350.dts
|
…
|
|
|
sun5i-a13-empire-electronix-d709.dts
|
ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun5i-a13-empire-electronix-m712.dts
|
…
|
|
|
sun5i-a13-hsg-h702.dts
|
ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun5i-a13-inet-86vs.dts
|
SPDX: Convert all of our multiple license tags to Linux Kernel style
|
2018-05-07 10:24:31 -04:00 |
|
sun5i-a13-inet-98v-rev2.dts
|
ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun5i-a13-olinuxino-micro.dts
|
ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun5i-a13-olinuxino.dts
|
ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun5i-a13-q8-tablet.dts
|
…
|
|
|
sun5i-a13-utoo-p66.dts
|
ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun5i-a13.dtsi
|
ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun5i-gr8-chip-pro.dts
|
ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun5i-gr8.dtsi
|
ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun5i-q8-common.dtsi
|
…
|
|
|
sun5i-r8-chip.dts
|
ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun5i-r8.dtsi
|
ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun5i-reference-design-tablet.dtsi
|
ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun5i.dtsi
|
ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun6i-a31-app4-evb1.dts
|
ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun6i-a31-colombus.dts
|
ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun6i-a31-hummingbird.dts
|
ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun6i-a31-i7.dts
|
ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun6i-a31-m9.dts
|
ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun6i-a31-mele-a1000g-quad.dts
|
ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun6i-a31-mixtile-loftq.dts
|
SPDX: Convert all of our multiple license tags to Linux Kernel style
|
2018-05-07 10:24:31 -04:00 |
|
sun6i-a31.dtsi
|
ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun6i-a31s-colorfly-e708-q1.dts
|
…
|
|
|
sun6i-a31s-cs908.dts
|
ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun6i-a31s-inet-q972.dts
|
…
|
|
|
sun6i-a31s-primo81.dts
|
ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun6i-a31s-sina31s-core.dtsi
|
ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun6i-a31s-sina31s.dts
|
ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun6i-a31s-sinovoip-bpi-m2.dts
|
ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun6i-a31s-yones-toptech-bs1078-v2.dts
|
ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun6i-a31s.dtsi
|
ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun6i-reference-design-tablet.dtsi
|
ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun7i-a20-ainol-aw1.dts
|
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
|
2019-04-17 14:34:45 +05:30 |
|
sun7i-a20-bananapi-m1-plus.dts
|
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
|
2019-04-17 14:34:45 +05:30 |
|
sun7i-a20-bananapi.dts
|
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
|
2019-04-17 14:34:45 +05:30 |
|
sun7i-a20-bananapro.dts
|
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
|
2019-04-17 14:34:45 +05:30 |
|
sun7i-a20-cubieboard2.dts
|
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
|
2019-04-17 14:34:45 +05:30 |
|
sun7i-a20-cubietruck.dts
|
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
|
2019-04-17 14:34:45 +05:30 |
|
sun7i-a20-hummingbird.dts
|
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
|
2019-04-17 14:34:45 +05:30 |
|
sun7i-a20-i12-tvbox.dts
|
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
|
2019-04-17 14:34:45 +05:30 |
|
sun7i-a20-icnova-swac.dts
|
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
|
2019-04-17 14:34:45 +05:30 |
|
sun7i-a20-itead-ibox.dts
|
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
|
2019-04-17 14:34:45 +05:30 |
|
sun7i-a20-lamobo-r1.dts
|
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
|
2019-04-17 14:34:45 +05:30 |
|
sun7i-a20-m3.dts
|
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
|
2019-04-17 14:34:45 +05:30 |
|
sun7i-a20-m5.dts
|
ARM: dts: a20-m5: Enable AHCI
|
2019-04-17 14:34:45 +05:30 |
|
sun7i-a20-mk808c.dts
|
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
|
2019-04-17 14:34:45 +05:30 |
|
sun7i-a20-olimex-som-evb-emmc.dts
|
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
|
2019-04-17 14:34:45 +05:30 |
|
sun7i-a20-olimex-som-evb.dts
|
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
|
2019-04-17 14:34:45 +05:30 |
|
sun7i-a20-olimex-som204-evb-emmc.dts
|
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
|
2019-04-17 14:34:45 +05:30 |
|
sun7i-a20-olimex-som204-evb.dts
|
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
|
2019-04-17 14:34:45 +05:30 |
|
sun7i-a20-olinuxino-lime.dts
|
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
|
2019-04-17 14:34:45 +05:30 |
|
sun7i-a20-olinuxino-lime2-emmc.dts
|
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
|
2019-04-17 14:34:45 +05:30 |
|
sun7i-a20-olinuxino-lime2.dts
|
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
|
2019-04-17 14:34:45 +05:30 |
|
sun7i-a20-olinuxino-micro-emmc.dts
|
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
|
2019-04-17 14:34:45 +05:30 |
|
sun7i-a20-olinuxino-micro.dts
|
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
|
2019-04-17 14:34:45 +05:30 |
|
sun7i-a20-orangepi-mini.dts
|
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
|
2019-04-17 14:34:45 +05:30 |
|
sun7i-a20-orangepi.dts
|
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
|
2019-04-17 14:34:45 +05:30 |
|
sun7i-a20-pcduino3-nano.dts
|
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
|
2019-04-17 14:34:45 +05:30 |
|
sun7i-a20-pcduino3.dts
|
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
|
2019-04-17 14:34:45 +05:30 |
|
sun7i-a20-primo73.dts
|
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
|
2019-04-17 14:34:45 +05:30 |
|
sun7i-a20-wexler-tab7200.dts
|
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
|
2019-04-17 14:34:45 +05:30 |
|
sun7i-a20-wits-pro-a20-dkt-u-boot.dtsi
|
ARM: dts: a20-wits-pro-a20-dkt: Enable AHCI
|
2019-04-17 14:34:45 +05:30 |
|
sun7i-a20-wits-pro-a20-dkt.dts
|
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
|
2019-04-17 14:34:45 +05:30 |
|
sun7i-a20-yones-toptech-bd1078.dts
|
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
|
2019-04-17 14:34:45 +05:30 |
|
sun7i-a20.dtsi
|
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
|
2019-04-17 14:34:45 +05:30 |
|
sun8i-a23-a33.dtsi
|
ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun8i-a23-evb.dts
|
ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun8i-a23-gt90h-v4.dts
|
ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun8i-a23-inet86dz.dts
|
ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun8i-a23-polaroid-mid2407pxe03.dts
|
ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun8i-a23-polaroid-mid2809pxe04.dts
|
ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun8i-a23-q8-tablet.dts
|
ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun8i-a23.dtsi
|
ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun8i-a33-ga10h-v1.1.dts
|
ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun8i-a33-inet-d978-rev2.dts
|
ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun8i-a33-olinuxino.dts
|
ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun8i-a33-q8-tablet.dts
|
…
|
|
|
sun8i-a33-sinlinx-sina33.dts
|
ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun8i-a33.dtsi
|
ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun8i-a83t-allwinner-h8homlet-v2.dts
|
ARM: dts: sun8i: Update A83T dts(i) files from Linux-v4.18-rc3
|
2018-08-13 13:07:35 +05:30 |
|
sun8i-a83t-bananapi-m3.dts
|
ARM: dts: sun8i: Update A83T dts(i) files from Linux-v4.18-rc3
|
2018-08-13 13:07:35 +05:30 |
|
sun8i-a83t-cubietruck-plus.dts
|
ARM: dts: sun8i: Update A83T dts(i) files from Linux-v4.18-rc3
|
2018-08-13 13:07:35 +05:30 |
|
sun8i-a83t-tbs-a711.dts
|
ARM: dts: sun8i: Update A83T dts(i) files from Linux-v4.18-rc3
|
2018-08-13 13:07:35 +05:30 |
|
sun8i-a83t.dtsi
|
ARM: dts: sun8i: Update A83T dts(i) files from Linux-v4.18-rc3
|
2018-08-13 13:07:35 +05:30 |
|
sun8i-h2-plus-bananapi-m2-zero.dts
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun8i-h2-plus-libretech-all-h3-cc.dts
|
sunxi: Add Libre Computer Board ALL-H3-CC H2+ ver.
|
2018-05-01 10:15:58 +05:30 |
|
sun8i-h2-plus-orangepi-r1.dts
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun8i-h2-plus-orangepi-zero.dts
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun8i-h3-bananapi-m2-plus-v1.2.dts
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun8i-h3-bananapi-m2-plus.dts
|
sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1
|
2019-02-18 13:54:23 +05:30 |
|
sun8i-h3-beelink-x2.dts
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun8i-h3-emlid-neutis-n5h3-devboard.dts
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun8i-h3-emlid-neutis-n5h3.dtsi
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun8i-h3-libretech-all-h3-cc.dts
|
sunxi: DT: H3: update board .dts files from Linux
|
2018-07-16 12:03:16 +05:30 |
|
sun8i-h3-mapleboard-mp130.dts
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun8i-h3-nanopi-duo2.dts
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun8i-h3-nanopi-m1-plus.dts
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun8i-h3-nanopi-m1.dts
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun8i-h3-nanopi-neo-air.dts
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun8i-h3-nanopi-neo.dts
|
sunxi: DT: H3: update board .dts files from Linux
|
2018-07-16 12:03:16 +05:30 |
|
sun8i-h3-nanopi.dtsi
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun8i-h3-orangepi-2.dts
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun8i-h3-orangepi-lite.dts
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun8i-h3-orangepi-one.dts
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun8i-h3-orangepi-pc-plus.dts
|
sunxi: DT: H3: update board .dts files from Linux
|
2018-07-16 12:03:16 +05:30 |
|
sun8i-h3-orangepi-pc.dts
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun8i-h3-orangepi-plus.dts
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun8i-h3-orangepi-plus2e.dts
|
sunxi: DT: H3: update board .dts files from Linux
|
2018-07-16 12:03:16 +05:30 |
|
sun8i-h3-orangepi-zero-plus2.dts
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun8i-h3-rervision-dvk.dts
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun8i-h3.dtsi
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun8i-q8-common.dtsi
|
ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun8i-r16-bananapi-m2m.dts
|
ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun8i-r16-nintendo-nes-classic-edition.dts
|
ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun8i-r16-parrot.dts
|
ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun8i-r40-bananapi-m2-ultra.dts
|
sunxi: DT: R40: Update device tree files from Linux 5.12
|
2021-04-28 10:05:12 +02:00 |
|
sun8i-r40.dtsi
|
sunxi: DT: R40: Update device tree files from Linux 5.12
|
2021-04-28 10:05:12 +02:00 |
|
sun8i-reference-design-tablet.dtsi
|
ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3
|
2018-09-28 22:09:24 +05:30 |
|
sun8i-s3-lichee-zero-plus.dts
|
sunxi: dts: sync Allwinner V3s-related DTs from Linux 5.10-rc1
|
2020-11-17 00:42:21 +00:00 |
|
sun8i-s3-pinecube.dts
|
sunxi: dts: sync Allwinner V3s-related DTs from Linux 5.10-rc1
|
2020-11-17 00:42:21 +00:00 |
|
sun8i-v3.dtsi
|
sunxi: dts: sync Allwinner V3s-related DTs from Linux 5.10-rc1
|
2020-11-17 00:42:21 +00:00 |
|
sun8i-v3s-licheepi-zero-dock.dts
|
sunxi: dts: sync Allwinner V3s-related DTs from Linux 5.10-rc1
|
2020-11-17 00:42:21 +00:00 |
|
sun8i-v3s-licheepi-zero.dts
|
sunxi: dts: sync Allwinner V3s-related DTs from Linux 5.10-rc1
|
2020-11-17 00:42:21 +00:00 |
|
sun8i-v3s.dtsi
|
sunxi: dts: sync Allwinner V3s-related DTs from Linux 5.10-rc1
|
2020-11-17 00:42:21 +00:00 |
|
sun8i-v40-bananapi-m2-berry.dts
|
sunxi: DT: R40: Update device tree files from Linux 5.12
|
2021-04-28 10:05:12 +02:00 |
|
sun9i-a80-cubieboard4.dts
|
ARM: dts: sun8i: Update A80 dts(i) from Linux-v4.18-rc3
|
2019-01-18 22:19:09 +05:30 |
|
sun9i-a80-cx-a99.dts
|
ARM: dts: sun8i: Update A80 dts(i) from Linux-v4.18-rc3
|
2019-01-18 22:19:09 +05:30 |
|
sun9i-a80-optimus.dts
|
ARM: dts: sun8i: Update A80 dts(i) from Linux-v4.18-rc3
|
2019-01-18 22:19:09 +05:30 |
|
sun9i-a80.dtsi
|
ARM: dts: sun8i: Update A80 dts(i) from Linux-v4.18-rc3
|
2019-01-18 22:19:09 +05:30 |
|
sun50i-a64-amarula-relic.dts
|
sunxi: DT: A64: update device tree files
|
2020-11-17 00:42:20 +00:00 |
|
sun50i-a64-bananapi-m64.dts
|
sunxi: DT: A64: Update devicetree files from Linux 5.12
|
2021-04-28 10:05:12 +02:00 |
|
sun50i-a64-cpu-opp.dtsi
|
sunxi: DT: A64: update device tree files
|
2020-11-17 00:42:20 +00:00 |
|
sun50i-a64-nanopi-a64.dts
|
sunxi: DT: A64: Update devicetree files from Linux 5.12
|
2021-04-28 10:05:12 +02:00 |
|
sun50i-a64-oceanic-5205-5inmfd.dts
|
sunxi: DT: A64: update device tree files
|
2020-11-17 00:42:20 +00:00 |
|
sun50i-a64-olinuxino-emmc.dts
|
sunxi: DT: A64: update device tree files
|
2020-11-17 00:42:20 +00:00 |
|
sun50i-a64-olinuxino.dts
|
sunxi: DT: A64: update device tree files
|
2020-11-17 00:42:20 +00:00 |
|
sun50i-a64-orangepi-win.dts
|
sunxi: DT: A64: Update devicetree files from Linux 5.12
|
2021-04-28 10:05:12 +02:00 |
|
sun50i-a64-pine64-lts.dts
|
sunxi: DT: A64: Update devicetree files from Linux 5.12
|
2021-04-28 10:05:12 +02:00 |
|
sun50i-a64-pine64-plus.dts
|
sunxi: DT: A64: Update devicetree files from Linux 5.12
|
2021-04-28 10:05:12 +02:00 |
|
sun50i-a64-pine64.dts
|
sunxi: DT: A64: Update devicetree files from Linux 5.12
|
2021-04-28 10:05:12 +02:00 |
|
sun50i-a64-pinebook.dts
|
sunxi: DT: A64: Update devicetree files from Linux 5.12
|
2021-04-28 10:05:12 +02:00 |
|
sun50i-a64-pinephone-1.0.dts
|
sunxi: DT: A64: Update devicetree files from Linux 5.12
|
2021-04-28 10:05:12 +02:00 |
|
sun50i-a64-pinephone-1.1.dts
|
sunxi: DT: A64: Update devicetree files from Linux 5.12
|
2021-04-28 10:05:12 +02:00 |
|
sun50i-a64-pinephone-1.2.dts
|
sunxi: DT: A64: Update devicetree files from Linux 5.12
|
2021-04-28 10:05:12 +02:00 |
|
sun50i-a64-pinephone.dtsi
|
sunxi: DT: A64: Update devicetree files from Linux 5.12
|
2021-04-28 10:05:12 +02:00 |
|
sun50i-a64-pinetab-early-adopter.dts
|
sunxi: DT: A64: Update devicetree files from Linux 5.12
|
2021-04-28 10:05:12 +02:00 |
|
sun50i-a64-pinetab.dts
|
sunxi: DT: A64: Update devicetree files from Linux 5.12
|
2021-04-28 10:05:12 +02:00 |
|
sun50i-a64-sopine-baseboard-u-boot.dtsi
|
configs: sopine-baseboard: Enable SPI-FLASH
|
2019-10-25 00:48:31 +05:30 |
|
sun50i-a64-sopine-baseboard.dts
|
sunxi: DT: A64: Update devicetree files from Linux 5.12
|
2021-04-28 10:05:12 +02:00 |
|
sun50i-a64-sopine.dtsi
|
sunxi: DT: A64: Update devicetree files from Linux 5.12
|
2021-04-28 10:05:12 +02:00 |
|
sun50i-a64-teres-i.dts
|
sunxi: DT: A64: Update devicetree files from Linux 5.12
|
2021-04-28 10:05:12 +02:00 |
|
sun50i-a64.dtsi
|
sunxi: DT: A64: Update devicetree files from Linux 5.12
|
2021-04-28 10:05:12 +02:00 |
|
sun50i-h5-bananapi-m2-plus-v1.2.dts
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun50i-h5-bananapi-m2-plus.dts
|
sunxi: Add Bananapi M2+ H5 board
|
2019-02-18 14:46:53 +05:30 |
|
sun50i-h5-emlid-neutis-n5-devboard.dts
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun50i-h5-emlid-neutis-n5.dtsi
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun50i-h5-libretech-all-h3-cc.dts
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun50i-h5-libretech-all-h3-it.dts
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun50i-h5-libretech-all-h5-cc.dts
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun50i-h5-nanopi-neo-plus2.dts
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun50i-h5-nanopi-neo2.dts
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun50i-h5-orangepi-pc2.dts
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun50i-h5-orangepi-prime.dts
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun50i-h5-orangepi-zero-plus.dts
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun50i-h5-orangepi-zero-plus2.dts
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun50i-h5.dtsi
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sun50i-h6-beelink-gs1.dts
|
ARM: dts: sunxi: h6: Update DT files
|
2021-01-25 21:52:00 +00:00 |
|
sun50i-h6-cpu-opp.dtsi
|
ARM: dts: sunxi: h6: Update DT files
|
2021-01-25 21:52:00 +00:00 |
|
sun50i-h6-orangepi-3.dts
|
sunxi: Add support for Orange Pi 3
|
2021-01-25 21:52:00 +00:00 |
|
sun50i-h6-orangepi-lite2.dts
|
ARM: dts: sunxi: h6: Update DT files
|
2021-01-25 21:52:00 +00:00 |
|
sun50i-h6-orangepi-one-plus.dts
|
ARM: dts: sunxi: h6: Update DT files
|
2021-01-25 21:52:00 +00:00 |
|
sun50i-h6-orangepi.dtsi
|
ARM: dts: sunxi: h6: Update DT files
|
2021-01-25 21:52:00 +00:00 |
|
sun50i-h6-pine-h64.dts
|
ARM: dts: sunxi: h6: Update DT files
|
2021-01-25 21:52:00 +00:00 |
|
sun50i-h6-tanix-tx6.dts
|
sunxi: Add support for Tanix TX6
|
2021-01-25 21:52:00 +00:00 |
|
sun50i-h6.dtsi
|
ARM: dts: sunxi: h6: Update DT files
|
2021-01-25 21:52:00 +00:00 |
|
sun50i-h616-orangepi-zero2.dts
|
sunxi: Add support for OrangePi Zero2
|
2021-01-25 21:52:01 +00:00 |
|
sun50i-h616.dtsi
|
sunxi: dts: H616: Drop reserved-memory node
|
2021-03-31 09:50:31 +01:00 |
|
sunxi-bananapi-m2-plus-v1.2.dtsi
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sunxi-bananapi-m2-plus.dtsi
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sunxi-common-regulators.dtsi
|
…
|
|
|
sunxi-h3-h5-emlid-neutis.dtsi
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sunxi-h3-h5.dtsi
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sunxi-itead-core-common.dtsi
|
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
|
2019-04-17 14:34:45 +05:30 |
|
sunxi-libretech-all-h3-cc.dtsi
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sunxi-libretech-all-h3-it.dtsi
|
sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
|
2020-01-24 23:06:49 +05:30 |
|
sunxi-q8-common.dtsi
|
…
|
|
|
sunxi-reference-design-tablet.dtsi
|
…
|
|
|
sunxi-u-boot.dtsi
|
sunxi: Bring back SD card as MMC device 0
|
2021-05-31 00:39:54 +01:00 |
|
tegra-u-boot.dtsi
|
binman: Rename 'position' to 'offset'
|
2018-08-01 16:30:06 -06:00 |
|
tegra20-colibri.dts
|
…
|
|
|
tegra20-harmony.dts
|
ARM: tegra: Rename pcie-controller to pcie
|
2019-06-05 09:16:35 -07:00 |
|
tegra20-medcom-wide.dts
|
…
|
|
|
tegra20-paz00.dts
|
…
|
|
|
tegra20-plutux.dts
|
…
|
|
|
tegra20-seaboard.dts
|
…
|
|
|
tegra20-tamonten.dtsi
|
…
|
|
|
tegra20-tec.dts
|
…
|
|
|
tegra20-trimslice.dts
|
ARM: tegra: Rename pcie-controller to pcie
|
2019-06-05 09:16:35 -07:00 |
|
tegra20-u-boot.dtsi
|
arm: tegra: Restore host1x/dc dm-pre-reloc properties
|
2018-08-21 08:34:55 -07:00 |
|
tegra20-ventana.dts
|
…
|
|
|
tegra20.dtsi
|
ARM: tegra: Rename pcie-controller to pcie
|
2019-06-05 09:16:35 -07:00 |
|
tegra30-apalis.dts
|
ARM: tegra: Rename pcie-controller to pcie
|
2019-06-05 09:16:35 -07:00 |
|
tegra30-beaver.dts
|
ARM: tegra: Rename pcie-controller to pcie
|
2019-06-05 09:16:35 -07:00 |
|
tegra30-cardhu.dts
|
ARM: tegra: Rename pcie-controller to pcie
|
2019-06-05 09:16:35 -07:00 |
|
tegra30-colibri.dts
|
…
|
|
|
tegra30-tamonten.dtsi
|
…
|
|
|
tegra30-tec-ng.dts
|
…
|
|
|
tegra30-u-boot.dtsi
|
…
|
|
|
tegra30.dtsi
|
ARM: tegra: Rename pcie-controller to pcie
|
2019-06-05 09:16:35 -07:00 |
|
tegra114-dalmore.dts
|
…
|
|
|
tegra114-u-boot.dtsi
|
…
|
|
|
tegra114.dtsi
|
…
|
|
|
tegra124-apalis.dts
|
apalis-tk1: support v1.2 hardware revision
|
2019-08-09 10:01:35 -07:00 |
|
tegra124-cei-tk1-som.dts
|
ARM: tegra: Rename pcie-controller to pcie
|
2019-06-05 09:16:35 -07:00 |
|
tegra124-jetson-tk1.dts
|
ARM: tegra: Rename pcie-controller to pcie
|
2019-06-05 09:16:35 -07:00 |
|
tegra124-nyan-big-u-boot.dtsi
|
nyan-big: change spi delay
|
2019-02-20 09:01:44 -07:00 |
|
tegra124-nyan-big.dts
|
…
|
|
|
tegra124-nyan.dtsi
|
ARM: tegra: enable ums on nyan boards
|
2019-02-20 09:01:44 -07:00 |
|
tegra124-u-boot.dtsi
|
…
|
|
|
tegra124-venice2.dts
|
…
|
|
|
tegra124.dtsi
|
ARM: tegra: Rename pcie-controller to pcie
|
2019-06-05 09:16:35 -07:00 |
|
tegra186-p2771-0000-000.dts
|
ARM: tegra: Rename pcie-controller to pcie
|
2019-06-05 09:16:35 -07:00 |
|
tegra186-p2771-0000-500.dts
|
ARM: tegra: Rename pcie-controller to pcie
|
2019-06-05 09:16:35 -07:00 |
|
tegra186-p2771-0000.dtsi
|
ARM: tegra: Mark built-in Ethernet as default on Jetson TX2
|
2019-06-05 09:16:35 -07:00 |
|
tegra186-u-boot.dtsi
|
tegra: fdt: Add tegra186-u-boot.dtsi
|
2020-01-14 10:35:19 -07:00 |
|
tegra186.dtsi
|
ARM: tegra: Enable PSCI support for Tegra210 and Tegra186
|
2020-06-18 13:14:50 -07:00 |
|
tegra210-p2371-0000.dts
|
…
|
|
|
tegra210-p2371-2180.dts
|
ARM: tegra: p2371-2180: add I2C nodes to DT
|
2020-04-02 14:30:01 -07:00 |
|
tegra210-p2571.dts
|
…
|
|
|
tegra210-p3450-0000.dts
|
ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support
|
2020-04-02 14:30:02 -07:00 |
|
tegra210-u-boot.dtsi
|
…
|
|
|
tegra210.dtsi
|
ARM: tegra: Enable PSCI support for Tegra210 and Tegra186
|
2020-06-18 13:14:50 -07:00 |
|
thunderx-88xx.dts
|
SPDX: Convert all of our multiple license tags to Linux Kernel style
|
2018-05-07 10:24:31 -04:00 |
|
thunderx-88xx.dtsi
|
SPDX: Convert all of our multiple license tags to Linux Kernel style
|
2018-05-07 10:24:31 -04:00 |
|
total_compute.dts
|
board: armltd: Add support for Total Compute platform
|
2020-08-24 14:11:31 -04:00 |
|
tps6507x.dtsi
|
…
|
|
|
tps65217.dtsi
|
…
|
|
|
tps65910.dtsi
|
…
|
|
|
twl4030.dtsi
|
…
|
|
|
twl4030_omap3.dtsi
|
…
|
|
|
twl6030.dtsi
|
omap4: Copy device tree from Linux 5.7.y
|
2020-06-16 17:00:12 +05:30 |
|
twl6030_omap4.dtsi
|
omap4: Copy device tree from Linux 5.7.y
|
2020-06-16 17:00:12 +05:30 |
|
ulcb.dtsi
|
ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.6.2
|
2020-04-28 21:34:51 +02:00 |
|
uniphier-ld4-ref.dts
|
ARM: dts: uniphier: resync DT with Linux 5.9-rc1
|
2020-08-18 02:01:14 +09:00 |
|
uniphier-ld4.dtsi
|
ARM: uniphier: sync with Linux 5.8-rc4
|
2020-07-11 21:30:21 +09:00 |
|
uniphier-ld6b-ref.dts
|
ARM: dts: uniphier: resync DT with Linux 5.9-rc1
|
2020-08-18 02:01:14 +09:00 |
|
uniphier-ld6b.dtsi
|
ARM: dts: uniphier: sync DT with Linux 4.17-rc1
|
2018-04-18 23:34:36 +09:00 |
|
uniphier-ld11-global.dts
|
ARM: dts: uniphier: resync DT with Linux 5.9-rc1
|
2020-08-18 02:01:14 +09:00 |
|
uniphier-ld11-ref.dts
|
ARM: dts: uniphier: resync DT with Linux 5.9-rc1
|
2020-08-18 02:01:14 +09:00 |
|
uniphier-ld11.dtsi
|
ARM: uniphier: sync with Linux 5.8-rc4
|
2020-07-11 21:30:21 +09:00 |
|
uniphier-ld20-global.dts
|
ARM: dts: uniphier: resync DT with Linux 5.9-rc1
|
2020-08-18 02:01:14 +09:00 |
|
uniphier-ld20-ref.dts
|
ARM: dts: uniphier: resync DT with Linux 5.9-rc1
|
2020-08-18 02:01:14 +09:00 |
|
uniphier-ld20.dtsi
|
ARM: dts: uniphier: resync DT with Linux 5.9-rc1
|
2020-08-18 02:01:14 +09:00 |
|
uniphier-pinctrl.dtsi
|
ARM: dts: uniphier: resync DT with Linux 5.9-rc1
|
2020-08-18 02:01:14 +09:00 |
|
uniphier-pro4-ace.dts
|
ARM: dts: uniphier: resync DT with Linux 5.9-rc1
|
2020-08-18 02:01:14 +09:00 |
|
uniphier-pro4-ref.dts
|
ARM: dts: uniphier: resync DT with Linux 5.9-rc1
|
2020-08-18 02:01:14 +09:00 |
|
uniphier-pro4-sanji.dts
|
ARM: dts: uniphier: resync DT with Linux 5.9-rc1
|
2020-08-18 02:01:14 +09:00 |
|
uniphier-pro4.dtsi
|
ARM: uniphier: sync with Linux 5.8-rc4
|
2020-07-11 21:30:21 +09:00 |
|
uniphier-pro5-4kbox.dts
|
SPDX: Convert all of our multiple license tags to Linux Kernel style
|
2018-05-07 10:24:31 -04:00 |
|
uniphier-pro5.dtsi
|
ARM: dts: uniphier: resync DT with Linux 5.9-rc1
|
2020-08-18 02:01:14 +09:00 |
|
uniphier-pxs2-gentil.dts
|
ARM: dts: uniphier: resync DT with Linux 5.9-rc1
|
2020-08-18 02:01:14 +09:00 |
|
uniphier-pxs2-vodka.dts
|
ARM: dts: uniphier: resync DT with Linux 5.9-rc1
|
2020-08-18 02:01:14 +09:00 |
|
uniphier-pxs2.dtsi
|
ARM: uniphier: sync with Linux 5.8-rc4
|
2020-07-11 21:30:21 +09:00 |
|
uniphier-pxs3-ref.dts
|
ARM: dts: uniphier: resync DT with Linux 5.9-rc1
|
2020-08-18 02:01:14 +09:00 |
|
uniphier-pxs3.dtsi
|
ARM: dts: uniphier: resync DT with Linux 5.9-rc1
|
2020-08-18 02:01:14 +09:00 |
|
uniphier-ref-daughter.dtsi
|
ARM: dts: uniphier: remove U-Boot own EEPROM compatible and property
|
2020-02-29 14:12:51 +09:00 |
|
uniphier-sld8-ref.dts
|
ARM: dts: uniphier: resync DT with Linux 5.9-rc1
|
2020-08-18 02:01:14 +09:00 |
|
uniphier-sld8.dtsi
|
ARM: uniphier: sync with Linux 5.8-rc4
|
2020-07-11 21:30:21 +09:00 |
|
uniphier-support-card.dtsi
|
ARM: dts: uniphier: resync DT with Linux 5.9-rc1
|
2020-08-18 02:01:14 +09:00 |
|
uniphier-v7-u-boot.dtsi
|
ARM: dts: uniphier: drop u-boot, dm-pre-reloc from SD/eMMC clock node
|
2018-04-24 00:35:34 +09:00 |
|
usb_a9263.dts
|
at91: fix devicetree warnings
|
2018-09-10 20:48:18 -04:00 |
|
versal-mini-emmc0.dts
|
arm64: versal: Update mini u-boot eMMC node parameters
|
2020-10-27 08:13:31 +01:00 |
|
versal-mini-emmc1.dts
|
arm64: versal: Update mini u-boot eMMC node parameters
|
2020-10-27 08:13:31 +01:00 |
|
versal-mini.dts
|
arm64: versal: Add mini configuration for Versal
|
2019-02-14 14:31:10 +01:00 |
|
vf-colibri-u-boot.dtsi
|
ARM: dts: colibri_vf: Add dcu0 node
|
2019-07-29 00:09:19 +02:00 |
|
vf-colibri.dtsi
|
ARM: dts: colibri_vf: Add dcu0 node
|
2019-07-29 00:09:19 +02:00 |
|
vf.dtsi
|
ARM: dts: colibri_vf: Add dcu0 node
|
2019-07-29 00:09:19 +02:00 |
|
vf500-colibri.dts
|
ARM: dts: colibri_vf: update device trees
|
2019-04-13 20:30:09 +02:00 |
|
vf610-bk4r1-u-boot.dtsi
|
ARM: DTS: Provide vf610-bk4r1-u-boot.dtsi for U-Boot specific properties
|
2019-04-13 20:30:08 +02:00 |
|
vf610-bk4r1.dts
|
ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052)
|
2019-04-13 20:30:08 +02:00 |
|
vf610-colibri.dts
|
ARM: dts: colibri_vf: update device trees
|
2019-04-13 20:30:09 +02:00 |
|
vf610-pcm052.dts
|
ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052)
|
2019-04-13 20:30:08 +02:00 |
|
vf610-pcm052.dtsi
|
ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052)
|
2019-04-13 20:30:08 +02:00 |
|
vf610-pinfunc.h
|
vybrid: ddr: Extend vf610-pinfunc.h with DDR pads definitions
|
2019-04-13 20:30:08 +02:00 |
|
vf610-twr.dts
|
SPDX: Convert all of our multiple license tags to Linux Kernel style
|
2018-05-07 10:24:31 -04:00 |
|
zynq-7000.dtsi
|
ARM: dts: zynq: enablement of coresight topology
|
2020-01-14 09:05:56 +01:00 |
|
zynq-cc108.dts
|
ARM: dts: zynq: correct and improve the model property of dt files
|
2019-02-15 15:04:00 +01:00 |
|
zynq-cse-nand.dts
|
ARM: zynq: Add nand controller node in zynq-ces-nand dt
|
2020-04-27 14:21:18 +02:00 |
|
zynq-cse-nor.dts
|
ARM: zynq: Enable DM for CFI NOR flash
|
2020-04-06 12:52:45 +02:00 |
|
zynq-cse-qspi-single.dts
|
ARM: zynq: Align model name with DT
|
2019-10-08 09:41:27 +02:00 |
|
zynq-cse-qspi.dtsi
|
ARM: zynq: Fix addresses in partition definitions
|
2020-04-06 12:51:31 +02:00 |
|
zynq-dlc20-rev1.0.dts
|
arm: zynq: Add support for DLC20 board
|
2018-10-16 14:58:45 +02:00 |
|
zynq-microzed.dts
|
ARM: dts: zynq: Set correct manufacturer for ZedBoard and MicroZed boards
|
2019-02-15 15:04:00 +01:00 |
|
zynq-minized.dts
|
arm: zynq: Add initial support for Avnet MiniZed
|
2018-05-31 13:50:39 +02:00 |
|
zynq-picozed.dts
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
zynq-syzygy-hub.dts
|
ARM: zynq: Convert Syzygy to DM_I2C
|
2019-02-14 14:31:10 +01:00 |
|
zynq-topic-miami.dts
|
ARM: zynq: Fix addresses in partition definitions
|
2020-04-06 12:51:31 +02:00 |
|
zynq-topic-miamilite.dts
|
SPDX: Convert all of our single license tags to Linux Kernel style
|
2018-05-07 09:34:12 -04:00 |
|
zynq-topic-miamiplus.dts
|
topic-miamiplus: Run CPU at 800MHz for speedgrade-2
|
2019-01-24 10:03:45 +01:00 |
|
zynq-zc702.dts
|
xilinx: Sync DTs with Linux kernel
|
2021-03-30 12:03:24 +02:00 |
|
zynq-zc706.dts
|
ARM: dts: zynq: correct and improve the model property of dt files
|
2019-02-15 15:04:00 +01:00 |
|
zynq-zc770-xm010.dts
|
ARM: zynq: Fix spi name node
|
2020-04-06 12:51:31 +02:00 |
|
zynq-zc770-xm011-x16.dts
|
ARM: zynq: Change zc770 xm011 Nand x16 configurations
|
2020-04-06 12:51:31 +02:00 |
|
zynq-zc770-xm011.dts
|
ARM: zynq: Change zc770 xm011 Nand x16 configurations
|
2020-04-06 12:51:31 +02:00 |
|
zynq-zc770-xm012.dts
|
ARM: dts: zynq: correct and improve the model property of dt files
|
2019-02-15 15:04:00 +01:00 |
|
zynq-zc770-xm013.dts
|
ARM: zynq: Fix spi name node
|
2020-04-06 12:51:31 +02:00 |
|
zynq-zed.dts
|
dts: switch spi-flash to jedec, spi-nor compatible
|
2019-04-12 10:54:27 +05:30 |
|
zynq-zturn-common.dtsi
|
xilinx: Sync DTs with Linux kernel
|
2021-03-30 12:03:24 +02:00 |
|
zynq-zturn-v5.dts
|
ARM: zynq: Add Z-turn board V5
|
2020-10-27 08:01:36 +01:00 |
|
zynq-zturn.dts
|
ARM: zynq: Add Z-turn board V5
|
2020-10-27 08:01:36 +01:00 |
|
zynq-zybo-z7.dts
|
xilinx: Sync DTs with Linux kernel
|
2021-03-30 12:03:24 +02:00 |
|
zynq-zybo.dts
|
ARM: dts: zynq: correct and improve the model property of dt files
|
2019-02-15 15:04:00 +01:00 |
|
zynqmp-a2197-revA.dts
|
arm64: zynqmp: Add generic a2197 system controller config
|
2019-10-08 09:55:11 +02:00 |
|
zynqmp-clk-ccf.dtsi
|
xilinx: Sync DTs with Linux kernel
|
2021-03-30 12:03:24 +02:00 |
|
zynqmp-e-a2197-00-revA.dts
|
arm64: zynqmp: Add 'i2c-mux-idle-disconnect' property
|
2021-05-19 09:44:50 +02:00 |
|
zynqmp-g-a2197-00-revA.dts
|
xilinx: Sync DTs with Linux kernel
|
2021-03-30 12:03:24 +02:00 |
|
zynqmp-m-a2197-01-revA.dts
|
arm64: zynqmp: Add missing silabs,skip-recall for si570 ref clk nodes
|
2021-05-19 09:44:50 +02:00 |
|
zynqmp-m-a2197-02-revA.dts
|
arm64: zynqmp: Add missing silabs,skip-recall for si570 ref clk nodes
|
2021-05-19 09:44:50 +02:00 |
|
zynqmp-m-a2197-03-revA.dts
|
arm64: zynqmp: Add missing silabs,skip-recall for si570 ref clk nodes
|
2021-05-19 09:44:50 +02:00 |
|
zynqmp-mini-emmc0.dts
|
arm64: zynqmp: Add zynqmp firmware specific DT nodes
|
2021-05-19 09:44:50 +02:00 |
|
zynqmp-mini-emmc1.dts
|
arm64: zynqmp: Add zynqmp firmware specific DT nodes
|
2021-05-19 09:44:50 +02:00 |
|
zynqmp-mini-nand.dts
|
arm64: zynqmp: Remove nand partition description from mini-nand
|
2020-01-14 09:05:53 +01:00 |
|
zynqmp-mini-qspi.dts
|
arm64: zynqmp: Fix zynqmp mini qspi max frequency
|
2020-10-27 08:13:33 +01:00 |
|
zynqmp-mini.dts
|
arm64: zynqmp: Add mini mtest configuration
|
2018-11-30 10:45:26 +01:00 |
|
zynqmp-p-a2197-00-revA.dts
|
arm64: zynqmp: Add psgtr DT descriptions
|
2021-05-19 09:44:50 +02:00 |
|
zynqmp-r5.dts
|
arm: zynqmp: Add ZynqMP minimal R5 support
|
2018-05-11 09:38:23 +02:00 |
|
zynqmp-sck-kv-g-revA.dts
|
arm64: zynqmp: Add description for SOM/Kria boards
|
2021-05-19 09:44:50 +02:00 |
|
zynqmp-sck-kv-g-revB.dts
|
arm64: zynqmp: Add description for SOM/Kria boards
|
2021-05-19 09:44:50 +02:00 |
|
zynqmp-sm-k26-revA-u-boot.dtsi
|
arm64: zynqmp: Add description for SOM/Kria boards
|
2021-05-19 09:44:50 +02:00 |
|
zynqmp-sm-k26-revA.dts
|
arm64: zynqmp: Add description for SOM/Kria boards
|
2021-05-19 09:44:50 +02:00 |
|
zynqmp-smk-k26-revA-u-boot.dtsi
|
arm64: zynqmp: Add description for SOM/Kria boards
|
2021-05-19 09:44:50 +02:00 |
|
zynqmp-smk-k26-revA.dts
|
arm64: zynqmp: Add description for SOM/Kria boards
|
2021-05-19 09:44:50 +02:00 |
|
zynqmp-topic-miamimp-xilinx-xdp-v1r1.dts
|
xilinx: Fix xlnx,mio_bank property
|
2020-08-20 09:49:20 +02:00 |
|
zynqmp-zc1232-revA.dts
|
xilinx: Sync DTs with Linux kernel
|
2021-03-30 12:03:24 +02:00 |
|
zynqmp-zc1254-revA.dts
|
arm64: zynqmp: Fix addresses in partition definitions
|
2020-04-06 12:51:31 +02:00 |
|
zynqmp-zc1751-xm015-dc1.dts
|
arm64: zynqmp: Add psgtr DT descriptions
|
2021-05-19 09:44:50 +02:00 |
|
zynqmp-zc1751-xm016-dc2.dts
|
arm64: zynqmp: Add pinctrl description
|
2021-05-19 09:44:50 +02:00 |
|
zynqmp-zc1751-xm017-dc3.dts
|
arm64: zynqmp: Update Copyright years to 2020
|
2020-04-06 12:51:31 +02:00 |
|
zynqmp-zc1751-xm018-dc4.dts
|
xilinx: Sync DTs with Linux kernel
|
2021-03-30 12:03:24 +02:00 |
|
zynqmp-zc1751-xm019-dc5.dts
|
arm64: zynqmp: Add pinctrl description
|
2021-05-19 09:44:50 +02:00 |
|
zynqmp-zcu100-revC.dts
|
arm64: zynqmp: Add psgtr DT descriptions
|
2021-05-19 09:44:50 +02:00 |
|
zynqmp-zcu102-rev1.0.dts
|
arm64: zynqmp: Add 'no-1-8-v' property for ZynqMP Boards
|
2020-04-06 12:51:31 +02:00 |
|
zynqmp-zcu102-rev1.1.dts
|
arm64: zynqmp Add support for zcu102 rev1.1
|
2020-04-06 12:52:45 +02:00 |
|
zynqmp-zcu102-revA.dts
|
arm64: zynqmp: Add psgtr DT descriptions
|
2021-05-19 09:44:50 +02:00 |
|
zynqmp-zcu102-revB.dts
|
arm64: zynqmp: Update Copyright years to 2020
|
2020-04-06 12:51:31 +02:00 |
|
zynqmp-zcu104-revA.dts
|
arm64: zynqmp: Add psgtr DT descriptions
|
2021-05-19 09:44:50 +02:00 |
|
zynqmp-zcu104-revC.dts
|
arm64: zynqmp: Add psgtr DT descriptions
|
2021-05-19 09:44:50 +02:00 |
|
zynqmp-zcu106-revA.dts
|
arm64: zynqmp: Add psgtr DT descriptions
|
2021-05-19 09:44:50 +02:00 |
|
zynqmp-zcu111-revA.dts
|
arm64: zynqmp: Add psgtr DT descriptions
|
2021-05-19 09:44:50 +02:00 |
|
zynqmp-zcu208-revA.dts
|
arm64: zynqmp: Add psgtr DT descriptions
|
2021-05-19 09:44:50 +02:00 |
|
zynqmp-zcu216-revA.dts
|
arm64: zynqmp: Add psgtr DT descriptions
|
2021-05-19 09:44:50 +02:00 |
|
zynqmp-zcu1275-revA.dts
|
arm64: zynqmp: Fix addresses in partition definitions
|
2020-04-06 12:51:31 +02:00 |
|
zynqmp-zcu1275-revB.dts
|
arm64: zynqmp: Add ethernet node for zcu1275 revB
|
2021-01-05 11:54:44 +01:00 |
|
zynqmp-zcu1285-revA.dts
|
arm64: zynqmp: Add Ethernet node for zcu1285 revA
|
2021-01-05 11:54:53 +01:00 |
|
zynqmp.dtsi
|
xilinx: Sync DTs with Linux kernel
|
2021-03-30 12:03:24 +02:00 |
17d74bd295