mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-06-09 23:36:03 +09:00
1ec7453384
The PSCI nodes are currently not populated for the Tegra210 and Tegra186
devices. This prevents the PSCI driver from being able to identify the
PSCI method used by these devices and causes the probe of the PSCI
driver to fail.
Since commit 81ea00838c ("efi_loader: PSCI reset and shutdown") was
added, which moves the PSCI EFI system reset handler into the PSCI
driver, this has prevented the EFI system reset from working for
Tegra210 and Tegra186. Therefore, populating these nodes is necessary
to fix the EFI system reset for Tegra210 and Tegra186.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
344 lines
9.4 KiB
Plaintext
344 lines
9.4 KiB
Plaintext
#include "skeleton.dtsi"
|
|
#include <dt-bindings/clock/tegra186-clock.h>
|
|
#include <dt-bindings/gpio/tegra186-gpio.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/mailbox/tegra186-hsp.h>
|
|
#include <dt-bindings/power/tegra186-powergate.h>
|
|
#include <dt-bindings/reset/tegra186-reset.h>
|
|
|
|
/ {
|
|
compatible = "nvidia,tegra186";
|
|
interrupt-parent = <&gic>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
gpio_main: gpio@2200000 {
|
|
compatible = "nvidia,tegra186-gpio";
|
|
reg-names = "security", "gpio";
|
|
reg =
|
|
<0x0 0x2200000 0x0 0x10000>,
|
|
<0x0 0x2210000 0x0 0x10000>;
|
|
interrupts =
|
|
<GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
ethernet@2490000 {
|
|
compatible = "nvidia,tegra186-eqos", "snps,dwc-qos-ethernet-4.10";
|
|
reg = <0x0 0x02490000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&bpmp TEGRA186_CLK_AXI_CBB>,
|
|
<&bpmp TEGRA186_CLK_EQOS_AXI>,
|
|
<&bpmp TEGRA186_CLK_EQOS_RX>,
|
|
<&bpmp TEGRA186_CLK_EQOS_PTP_REF>,
|
|
<&bpmp TEGRA186_CLK_EQOS_TX>;
|
|
clock-names = "slave_bus",
|
|
"master_bus",
|
|
"rx",
|
|
"ptp_ref",
|
|
"tx";
|
|
resets = <&bpmp TEGRA186_RESET_EQOS>;
|
|
reset-names = "eqos";
|
|
phy-mode = "rgmii";
|
|
status = "disabled";
|
|
};
|
|
|
|
uarta: serial@3100000 {
|
|
compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
|
|
reg = <0x0 0x03100000 0x0 0x10000>;
|
|
reg-shift = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gen1_i2c: i2c@3160000 {
|
|
compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
|
|
reg = <0x0 0x3160000 0x0 0x100>;
|
|
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&bpmp TEGRA186_CLK_I2C1>;
|
|
clock-names = "div-clk";
|
|
resets = <&bpmp TEGRA186_RESET_I2C1>;
|
|
reset-names = "i2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
cam_i2c: i2c@3180000 {
|
|
compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
|
|
reg = <0x0 0x3180000 0x0 0x100>;
|
|
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&bpmp TEGRA186_CLK_I2C3>;
|
|
clock-names = "div-clk";
|
|
resets = <&bpmp TEGRA186_RESET_I2C3>;
|
|
reset-names = "i2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
dp_aux_ch1_i2c: i2c@3190000 {
|
|
compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
|
|
reg = <0x0 0x3190000 0x0 0x100>;
|
|
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&bpmp TEGRA186_CLK_I2C4>;
|
|
clock-names = "div-clk";
|
|
resets = <&bpmp TEGRA186_RESET_I2C4>;
|
|
reset-names = "i2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
dp_aux_ch0_i2c: i2c@31b0000 {
|
|
compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
|
|
reg = <0x0 0x31b0000 0x0 0x100>;
|
|
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&bpmp TEGRA186_CLK_I2C6>;
|
|
clock-names = "div-clk";
|
|
resets = <&bpmp TEGRA186_RESET_I2C6>;
|
|
reset-names = "i2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
gen7_i2c: i2c@31c0000 {
|
|
compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
|
|
reg = <0x0 0x31c0000 0x0 0x100>;
|
|
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&bpmp TEGRA186_CLK_I2C7>;
|
|
clock-names = "div-clk";
|
|
resets = <&bpmp TEGRA186_RESET_I2C7>;
|
|
reset-names = "i2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
gen9_i2c: i2c@31e0000 {
|
|
compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
|
|
reg = <0x0 0x31e0000 0x0 0x100>;
|
|
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&bpmp TEGRA186_CLK_I2C9>;
|
|
clock-names = "div-clk";
|
|
resets = <&bpmp TEGRA186_RESET_I2C9>;
|
|
reset-names = "i2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci@3400000 {
|
|
compatible = "nvidia,tegra186-sdhci";
|
|
reg = <0x0 0x03400000 0x0 0x200>;
|
|
resets = <&bpmp TEGRA186_RESET_SDMMC1>;
|
|
reset-names = "sdhci";
|
|
clocks = <&bpmp TEGRA186_CLK_SDMMC1>;
|
|
interrupts = <GIC_SPI 62 0x04>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci@3460000 {
|
|
compatible = "nvidia,tegra186-sdhci";
|
|
reg = <0x0 0x03460000 0x0 0x200>;
|
|
resets = <&bpmp TEGRA186_RESET_SDMMC4>;
|
|
reset-names = "sdhci";
|
|
clocks = <&bpmp TEGRA186_CLK_SDMMC4>;
|
|
interrupts = <GIC_SPI 31 0x04>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gic: interrupt-controller@3881000 {
|
|
compatible = "arm,gic-400";
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
reg = <0x0 0x3881000 0x0 0x1000>,
|
|
<0x0 0x3882000 0x0 0x2000>,
|
|
<0x0 0x3884000 0x0 0x2000>,
|
|
<0x0 0x3886000 0x0 0x2000>;
|
|
interrupts = <GIC_PPI 9
|
|
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
interrupt-parent = <&gic>;
|
|
};
|
|
|
|
hsp: hsp@3c00000 {
|
|
compatible = "nvidia,tegra186-hsp";
|
|
reg = <0x0 0x03c00000 0x0 0xa0000>;
|
|
interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "doorbell";
|
|
#mbox-cells = <2>;
|
|
};
|
|
|
|
gen2_i2c: i2c@c240000 {
|
|
compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
|
|
reg = <0x0 0xc240000 0x0 0x100>;
|
|
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&bpmp TEGRA186_CLK_I2C2>;
|
|
clock-names = "div-clk";
|
|
resets = <&bpmp TEGRA186_RESET_I2C2>;
|
|
reset-names = "i2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
gen8_i2c: i2c@c250000 {
|
|
compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
|
|
reg = <0x0 0xc250000 0x0 0x100>;
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&bpmp TEGRA186_CLK_I2C8>;
|
|
clock-names = "div-clk";
|
|
resets = <&bpmp TEGRA186_RESET_I2C8>;
|
|
reset-names = "i2c";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio_aon: gpio@c2f0000 {
|
|
compatible = "nvidia,tegra186-gpio-aon";
|
|
reg-names = "security", "gpio";
|
|
reg =
|
|
<0x0 0xc2f0000 0x0 0x1000>,
|
|
<0x0 0xc2f1000 0x0 0x1000>;
|
|
interrupts =
|
|
<GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
pcie@10003000 {
|
|
compatible = "nvidia,tegra186-pcie";
|
|
device_type = "pci";
|
|
reg = <0x0 0x10003000 0x0 0x00000800 /* PADS registers */
|
|
0x0 0x10003800 0x0 0x00000800 /* AFI registers */
|
|
0x0 0x40000000 0x0 0x10000000>; /* configuration space */
|
|
reg-names = "pads", "afi", "cs";
|
|
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
|
|
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, /* MSI interrupt */
|
|
<GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; /* Wake interrupt */
|
|
interrupt-names = "intr", "msi", "wake";
|
|
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
bus-range = <0x00 0xff>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
|
|
ranges = <0x82000000 0 0x10000000 0x0 0x10000000 0 0x00001000 /* port 0 configuration space */
|
|
0x82000000 0 0x10001000 0x0 0x10001000 0 0x00001000 /* port 1 configuration space */
|
|
0x82000000 0 0x10004000 0x0 0x10004000 0 0x00001000 /* port 2 configuration space */
|
|
0x81000000 0 0x0 0x0 0x50000000 0 0x00010000 /* downstream I/O (64 KiB) */
|
|
0x82000000 0 0x50100000 0x0 0x50100000 0 0x07f00000 /* non-prefetchable memory (127 MiB) */
|
|
0xc2000000 0 0x58000000 0x0 0x58000000 0 0x28000000>; /* prefetchable memory (640 MiB) */
|
|
|
|
clocks = <&bpmp TEGRA186_CLK_PCIE>,
|
|
<&bpmp TEGRA186_CLK_AFI>;
|
|
clock-names = "pex", "afi";
|
|
resets = <&bpmp TEGRA186_RESET_PCIE>,
|
|
<&bpmp TEGRA186_RESET_AFI>,
|
|
<&bpmp TEGRA186_RESET_PCIEXCLK>;
|
|
reset-names = "pex", "afi", "pcie_x";
|
|
power-domains = <&bpmp TEGRA186_POWER_DOMAIN_PCX>;
|
|
status = "disabled";
|
|
|
|
pci@1,0 {
|
|
device_type = "pci";
|
|
assigned-addresses = <0x82000800 0 0x10000000 0 0x1000>;
|
|
reg = <0x000800 0 0 0 0>;
|
|
status = "disabled";
|
|
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
nvidia,num-lanes = <2>;
|
|
};
|
|
|
|
pci@2,0 {
|
|
device_type = "pci";
|
|
assigned-addresses = <0x82001000 0 0x10001000 0 0x1000>;
|
|
reg = <0x001000 0 0 0 0>;
|
|
status = "disabled";
|
|
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
nvidia,num-lanes = <1>;
|
|
};
|
|
|
|
pci@3,0 {
|
|
device_type = "pci";
|
|
assigned-addresses = <0x82001800 0 0x10004000 0 0x1000>;
|
|
reg = <0x001800 0 0 0 0>;
|
|
status = "disabled";
|
|
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
nvidia,num-lanes = <1>;
|
|
};
|
|
};
|
|
|
|
sysram@30000000 {
|
|
compatible = "nvidia,tegra186-sysram", "mmio-sram";
|
|
reg = <0x0 0x30000000 0x0 0x50000>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges = <0 0x0 0x0 0x30000000 0x0 0x50000>;
|
|
|
|
sysram_cpu_bpmp_tx: shmem@4e000 {
|
|
compatible = "nvidia,tegra186-bpmp-shmem";
|
|
reg = <0x0 0x4e000 0x0 0x1000>;
|
|
};
|
|
|
|
sysram_cpu_bpmp_rx: shmem@4f000 {
|
|
compatible = "nvidia,tegra186-bpmp-shmem";
|
|
reg = <0x0 0x4f000 0x0 0x1000>;
|
|
};
|
|
};
|
|
|
|
bpmp: bpmp {
|
|
compatible = "nvidia,tegra186-bpmp";
|
|
mboxes = <&hsp HSP_MBOX_TYPE_DB HSP_DB_MASTER_BPMP>;
|
|
/*
|
|
* In theory, these references, and the configuration in the
|
|
* node these reference point at, are board-specific, since
|
|
* they depend on the BCT's memory carve-out setup, the
|
|
* firmware that's actually loaded onto the BPMP, etc. However,
|
|
* in practice, all boards are likely to use identical values.
|
|
*/
|
|
shmem = <&sysram_cpu_bpmp_tx &sysram_cpu_bpmp_rx>;
|
|
#clock-cells = <1>;
|
|
#power-domain-cells = <1>;
|
|
#reset-cells = <1>;
|
|
|
|
bpmp_i2c: i2c {
|
|
compatible = "nvidia,tegra186-bpmp-i2c";
|
|
nvidia,bpmp-bus-id = <5>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
psci {
|
|
compatible = "arm,psci-1.0";
|
|
method = "smc";
|
|
};
|
|
};
|