rockchip: rk3328: Add support for FriendlyARM NanoPi R2S
This adds support for the NanoPi R2S from FriendlyArm. Rockchip RK3328 SoC 1GB DDR4 RAM Gigabit Ethernet (WAN) Gigabit Ethernet (USB3) (LAN) USB 2.0 Host Port MicroSD slot Reset button WAN - LAN - SYS LED Signed-off-by: David Bauer <mail@david-bauer.net> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
This commit is contained in:
David Bauer
Kever Yang
parent
a475bef534
commit
b821e0db46
|
|
@ -110,6 +110,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3308) += \
|
|||
|
||||
dtb-$(CONFIG_ROCKCHIP_RK3328) += \
|
||||
rk3328-evb.dtb \
|
||||
rk3328-nanopi-r2s.dtb \
|
||||
rk3328-roc-cc.dtb \
|
||||
rk3328-rock64.dtb \
|
||||
rk3328-rock-pi-e.dtb
|
||||
|
|
|
|||
|
|
@ -0,0 +1,40 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* (C) Copyright 2018-2019 Rockchip Electronics Co., Ltd
|
||||
* (C) Copyright 2020 David Bauer
|
||||
*/
|
||||
|
||||
#include "rk3328-u-boot.dtsi"
|
||||
#include "rk3328-sdram-ddr4-666.dtsi"
|
||||
/ {
|
||||
chosen {
|
||||
u-boot,spl-boot-order = "same-as-spl", &sdmmc, &emmc;
|
||||
};
|
||||
};
|
||||
|
||||
&gpio0 {
|
||||
u-boot,dm-spl;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
u-boot,dm-spl;
|
||||
};
|
||||
|
||||
&sdmmc0m1_gpio {
|
||||
u-boot,dm-spl;
|
||||
};
|
||||
|
||||
&pcfg_pull_up_4ma {
|
||||
u-boot,dm-spl;
|
||||
};
|
||||
|
||||
/* Need this and all the pinctrl/gpio stuff above to set pinmux */
|
||||
&vcc_sd {
|
||||
u-boot,dm-spl;
|
||||
};
|
||||
|
||||
&gmac2io {
|
||||
snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 10000 50000>;
|
||||
};
|
||||
|
|
@ -0,0 +1,370 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2020 David Bauer <mail@david-bauer.net>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include "rk3328.dtsi"
|
||||
|
||||
/ {
|
||||
model = "FriendlyElec NanoPi R2S";
|
||||
compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328";
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
gmac_clk: gmac-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "gmac_clkin";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&reset_button_pin>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <50>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
lan_led: led-0 {
|
||||
gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||||
label = "nanopi-r2s:green:lan";
|
||||
};
|
||||
|
||||
sys_led: led-1 {
|
||||
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||||
label = "nanopi-r2s:red:sys";
|
||||
};
|
||||
|
||||
wan_led: led-2 {
|
||||
gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
|
||||
label = "nanopi-r2s:green:wan";
|
||||
};
|
||||
};
|
||||
|
||||
vcc_io_sdio: sdmmcio-regulator {
|
||||
compatible = "regulator-gpio";
|
||||
enable-active-high;
|
||||
gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&sdio_vcc_pin>;
|
||||
pinctrl-names = "default";
|
||||
regulator-name = "vcc_io_sdio";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-settling-time-us = <5000>;
|
||||
regulator-type = "voltage";
|
||||
startup-delay-us = <2000>;
|
||||
states = <1800000 0x1
|
||||
3300000 0x0>;
|
||||
vin-supply = <&vcc_io_33>;
|
||||
};
|
||||
|
||||
vcc_sd: sdmmc-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-0 = <&sdmmc0m1_gpio>;
|
||||
pinctrl-names = "default";
|
||||
regulator-name = "vcc_sd";
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc_io_33>;
|
||||
};
|
||||
|
||||
vdd_5v: vdd-5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vdd_5v";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&gmac2io {
|
||||
assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
|
||||
assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
|
||||
clock_in_out = "input";
|
||||
phy-handle = <&rtl8211e>;
|
||||
phy-mode = "rgmii";
|
||||
phy-supply = <&vcc_io_33>;
|
||||
pinctrl-0 = <&rgmiim1_pins>;
|
||||
pinctrl-names = "default";
|
||||
rx_delay = <0x18>;
|
||||
snps,aal;
|
||||
tx_delay = <0x24>;
|
||||
status = "okay";
|
||||
|
||||
mdio {
|
||||
compatible = "snps,dwmac-mdio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
rtl8211e: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-id001c.c915",
|
||||
"ethernet-phy-ieee802.3-c22";
|
||||
reg = <1>;
|
||||
pinctrl-0 = <ð_phy_reset_pin>;
|
||||
pinctrl-names = "default";
|
||||
reset-assert-us = <10000>;
|
||||
reset-deassert-us = <50000>;
|
||||
reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
|
||||
rk805: pmic@18 {
|
||||
compatible = "rockchip,rk805";
|
||||
reg = <0x18>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "xin32k", "rk805-clkout2";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
pinctrl-names = "default";
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
|
||||
vcc1-supply = <&vdd_5v>;
|
||||
vcc2-supply = <&vdd_5v>;
|
||||
vcc3-supply = <&vdd_5v>;
|
||||
vcc4-supply = <&vdd_5v>;
|
||||
vcc5-supply = <&vcc_io_33>;
|
||||
vcc6-supply = <&vdd_5v>;
|
||||
|
||||
regulators {
|
||||
vdd_log: DCDC_REG1 {
|
||||
regulator-name = "vdd_log";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1450000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_arm: DCDC_REG2 {
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1450000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <950000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_io_33: DCDC_REG4 {
|
||||
regulator-name = "vcc_io_33";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_18: LDO_REG1 {
|
||||
regulator-name = "vcc_18";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc18_emmc: LDO_REG2 {
|
||||
regulator-name = "vcc18_emmc";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_10: LDO_REG3 {
|
||||
regulator-name = "vdd_10";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
pmuio-supply = <&vcc_io_33>;
|
||||
vccio1-supply = <&vcc_io_33>;
|
||||
vccio2-supply = <&vcc18_emmc>;
|
||||
vccio3-supply = <&vcc_io_sdio>;
|
||||
vccio4-supply = <&vcc_18>;
|
||||
vccio5-supply = <&vcc_io_33>;
|
||||
vccio6-supply = <&vcc_io_33>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
button {
|
||||
reset_button_pin: reset-button-pin {
|
||||
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
ethernet-phy {
|
||||
eth_phy_reset_pin: eth-phy-reset-pin {
|
||||
rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
lan_led_pin: lan-led-pin {
|
||||
rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
sys_led_pin: sys-led-pin {
|
||||
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
wan_led_pin: wan-led-pin {
|
||||
rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
sd {
|
||||
sdio_vcc_pin: sdio-vcc-pin {
|
||||
rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
|
||||
pinctrl-names = "default";
|
||||
sd-uhs-sdr12;
|
||||
sd-uhs-sdr25;
|
||||
sd-uhs-sdr50;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc_sd>;
|
||||
vqmmc-supply = <&vcc_io_sdio>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <0>;
|
||||
rockchip,hw-tshut-polarity = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy_host {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb20_otg {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -5,6 +5,13 @@ F: board/rockchip/evb_rk3328
|
|||
F: include/configs/evb_rk3328.h
|
||||
F: configs/evb-rk3328_defconfig
|
||||
|
||||
NANOPI-R2S-RK3328
|
||||
M: David Bauer <mail@david-bauer.net>
|
||||
S: Maintained
|
||||
F: configs/nanopi-r2s-rk3328_defconfig
|
||||
F: arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
|
||||
F: arch/arm/dts/rk3328-nanopi-r2s.dts
|
||||
|
||||
ROC-RK3328-CC
|
||||
M: Loic Devulder <ldevulder@suse.com>
|
||||
M: Chen-Yu Tsai <wens@csie.org>
|
||||
|
|
|
|||
|
|
@ -0,0 +1,98 @@
|
|||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_ROCKCHIP=y
|
||||
CONFIG_SYS_TEXT_BASE=0x00200000
|
||||
CONFIG_SPL_GPIO_SUPPORT=y
|
||||
CONFIG_ENV_OFFSET=0x3F8000
|
||||
CONFIG_ROCKCHIP_RK3328=y
|
||||
CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
|
||||
CONFIG_TPL_LIBCOMMON_SUPPORT=y
|
||||
CONFIG_TPL_LIBGENERIC_SUPPORT=y
|
||||
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
|
||||
CONFIG_SPL_STACK_R_ADDR=0x600000
|
||||
CONFIG_NR_DRAM_BANKS=1
|
||||
CONFIG_DEBUG_UART_BASE=0xFF130000
|
||||
CONFIG_DEBUG_UART_CLOCK=24000000
|
||||
CONFIG_SYSINFO=y
|
||||
CONFIG_DEBUG_UART=y
|
||||
CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
|
||||
# CONFIG_ANDROID_BOOT_IMAGE is not set
|
||||
CONFIG_FIT=y
|
||||
CONFIG_FIT_VERBOSE=y
|
||||
CONFIG_SPL_LOAD_FIT=y
|
||||
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-nanopi-r2s.dtb"
|
||||
CONFIG_MISC_INIT_R=y
|
||||
# CONFIG_DISPLAY_CPUINFO is not set
|
||||
CONFIG_DISPLAY_BOARDINFO_LATE=y
|
||||
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
|
||||
CONFIG_TPL_SYS_MALLOC_SIMPLE=y
|
||||
CONFIG_SPL_STACK_R=y
|
||||
CONFIG_SPL_I2C_SUPPORT=y
|
||||
CONFIG_SPL_POWER_SUPPORT=y
|
||||
CONFIG_SPL_ATF=y
|
||||
CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
|
||||
CONFIG_CMD_BOOTZ=y
|
||||
CONFIG_CMD_GPT=y
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_USB=y
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
CONFIG_CMD_TIME=y
|
||||
CONFIG_SPL_OF_CONTROL=y
|
||||
CONFIG_TPL_OF_CONTROL=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="rk3328-nanopi-r2s"
|
||||
CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
|
||||
CONFIG_TPL_OF_PLATDATA=y
|
||||
CONFIG_ENV_IS_IN_MMC=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_NET_RANDOM_ETHADDR=y
|
||||
CONFIG_TPL_DM=y
|
||||
CONFIG_REGMAP=y
|
||||
CONFIG_SPL_REGMAP=y
|
||||
CONFIG_TPL_REGMAP=y
|
||||
CONFIG_SYSCON=y
|
||||
CONFIG_SPL_SYSCON=y
|
||||
CONFIG_TPL_SYSCON=y
|
||||
CONFIG_CLK=y
|
||||
CONFIG_SPL_CLK=y
|
||||
CONFIG_FASTBOOT_BUF_ADDR=0x800800
|
||||
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
|
||||
CONFIG_ROCKCHIP_GPIO=y
|
||||
CONFIG_SYS_I2C_ROCKCHIP=y
|
||||
CONFIG_MMC_DW=y
|
||||
CONFIG_MMC_DW_ROCKCHIP=y
|
||||
CONFIG_SF_DEFAULT_SPEED=20000000
|
||||
CONFIG_DM_ETH=y
|
||||
CONFIG_ETH_DESIGNWARE=y
|
||||
CONFIG_GMAC_ROCKCHIP=y
|
||||
CONFIG_PINCTRL=y
|
||||
CONFIG_SPL_PINCTRL=y
|
||||
CONFIG_DM_PMIC=y
|
||||
CONFIG_PMIC_RK8XX=y
|
||||
CONFIG_SPL_DM_REGULATOR=y
|
||||
CONFIG_REGULATOR_PWM=y
|
||||
CONFIG_DM_REGULATOR_FIXED=y
|
||||
CONFIG_SPL_DM_REGULATOR_FIXED=y
|
||||
CONFIG_REGULATOR_RK8XX=y
|
||||
CONFIG_PWM_ROCKCHIP=y
|
||||
CONFIG_RAM=y
|
||||
CONFIG_SPL_RAM=y
|
||||
CONFIG_TPL_RAM=y
|
||||
CONFIG_DM_RESET=y
|
||||
CONFIG_BAUDRATE=1500000
|
||||
CONFIG_DEBUG_UART_SHIFT=2
|
||||
CONFIG_SYSRESET=y
|
||||
# CONFIG_TPL_SYSRESET is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_XHCI_HCD=y
|
||||
CONFIG_USB_XHCI_DWC3=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_EHCI_GENERIC=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_OHCI_GENERIC=y
|
||||
CONFIG_USB_DWC2=y
|
||||
CONFIG_USB_DWC3=y
|
||||
# CONFIG_USB_DWC3_GADGET is not set
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_GADGET_DWC2_OTG=y
|
||||
CONFIG_SPL_TINY_MEMSET=y
|
||||
CONFIG_TPL_TINY_MEMSET=y
|
||||
CONFIG_ERRNO_STR=y
|
||||
Loading…
Reference in New Issue