apalis-tk1: support v1.2 hardware revision

Support the V1.2 hardware revision with the following pin muxing
changes:

Ddc_scl_pv4 and ddc_sda_pv5 previously used as Apalis GPIO3 and GPIO4
are now used as DDC pins.

Gen2_i2c_scl_pt5 and gen2_i2c_sda_pt6 previously used as DDC pins are
now used as USB power enable signals.

Usb_vbus_en0_pn4 and usb_vbus_en1_pn5 previously used as USB power
enable signals are now used as GPIO3 and GPIO4.

Additionally a new device tree file tegra124-apalis-v1.2-eval.dtb is
loaded on V1.2 and later modules and resp. USB power enable signals
activated.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
This commit is contained in:
Marcel Ziswiler 2019-08-09 13:21:46 +03:00 committed by Tom Warren
parent 5a20adf446
commit 4c63a601b9
5 changed files with 105 additions and 58 deletions

View File

@ -1,5 +1,5 @@
/*
* Copyright 2016 Toradex AG
* Copyright 2016-2019 Toradex AG
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@ -230,19 +230,21 @@
};
/* Apalis GPIO */
ddc_scl_pv4 {
nvidia,pins = "ddc_scl_pv4";
usb_vbus_en0_pn4 {
nvidia,pins = "usb_vbus_en0_pn4";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,open-drain = <TEGRA_PIN_DISABLE>;
};
ddc_sda_pv5 {
nvidia,pins = "ddc_sda_pv5";
usb_vbus_en1_pn5 {
nvidia,pins = "usb_vbus_en1_pn5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,open-drain = <TEGRA_PIN_DISABLE>;
};
pex_l0_rst_n_pdd1 {
nvidia,pins = "pex_l0_rst_n_pdd1";
@ -333,24 +335,6 @@
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
/* Apalis I2C2 (DDC) */
gen2_i2c_scl_pt5 {
nvidia,pins = "gen2_i2c_scl_pt5";
nvidia,function = "i2c2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
gen2_i2c_sda_pt6 {
nvidia,pins = "gen2_i2c_sda_pt6";
nvidia,function = "i2c2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
/* Apalis I2C3 (CAM) */
cam_i2c_scl_pbb1 {
nvidia,pins = "cam_i2c_scl_pbb1";
@ -369,6 +353,24 @@
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
/* Apalis I2C4 (DDC) */
ddc_scl_pv4 {
nvidia,pins = "ddc_scl_pv4";
nvidia,function = "i2c4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
};
ddc_sda_pv5 {
nvidia,pins = "ddc_sda_pv5";
nvidia,function = "i2c4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
};
/* Apalis MMC1 */
sdmmc1_cd_n_pv3 { /* CD# GPIO */
nvidia,pins = "sdmmc1_wp_n_pv3";
@ -470,12 +472,12 @@
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
/* PWM3 active on pu6 being Apalis BKL1_PWM */
/* PWM3 active on pu6 being Apalis BKL1_PWM as well */
ph3 {
nvidia,pins = "ph3";
nvidia,function = "gmi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,function = "pwm3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
@ -736,8 +738,8 @@
};
/* Apalis USBH_EN */
usb_vbus_en1_pn5 {
nvidia,pins = "usb_vbus_en1_pn5";
gen2_i2c_sda_pt6 {
nvidia,pins = "gen2_i2c_sda_pt6";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
@ -755,8 +757,8 @@
};
/* Apalis USBO1_EN */
usb_vbus_en0_pn4 {
nvidia,pins = "usb_vbus_en0_pn4";
gen2_i2c_scl_pt5 {
nvidia,pins = "gen2_i2c_scl_pt5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
@ -1501,10 +1503,14 @@
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
pv0 { /* NC */
/*
* PCB Version Indication: V1.2 and later have GPIO_PV0
* wired to GND, was NC before
*/
pv0 {
nvidia,pins = "pv0";
nvidia,function = "rsvd1";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
@ -1630,13 +1636,7 @@
};
};
/*
* GEN2_I2C: I2C2_SDA/SCL (DDC) on MXM3 pin 205/207 (e.g. display EDID)
*/
hdmi_ddc: i2c@7000c400 {
status = "okay";
clock-frequency = <10000>;
};
/* GEN2_I2C: unused */
/*
* CAM_I2C: I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor
@ -1647,7 +1647,14 @@
clock-frequency = <400000>;
};
/* I2C4 (DDC): unused */
/*
* I2C4 (DDC): I2C4_SDA/SCL (DDC) on MXM3 pin 205/207
* (e.g. display EDID)
*/
hdmi_ddc: i2c@7000c700 {
status = "okay";
clock-frequency = <10000>;
};
/* PWR_I2C: power I2C to audio codec, PMIC and temperature sensor */
i2c@7000d000 {
@ -2112,7 +2119,7 @@
regulator-name = "VCC_USBO1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&reg_5v0>;
};
@ -2123,7 +2130,7 @@
regulator-name = "VCC_USBH(2A|2C|2D|3|4)";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
gpio = <&gpio TEGRA_GPIO(T, 6) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&reg_5v0>;
};

View File

@ -10,6 +10,7 @@
#include <asm/io.h>
#include <asm/arch/gpio.h>
#include <asm/arch/pinmux.h>
#include <environment.h>
#include <pci_tegra.h>
#include <power/as3722.h>
#include <power/pmic.h>
@ -25,6 +26,10 @@
#define PEX_PERST_N TEGRA_GPIO(DD, 1) /* Apalis GPIO7 */
#define RESET_MOCI_CTRL TEGRA_GPIO(U, 4)
#endif /* CONFIG_APALIS_TK1_PCIE_EVALBOARD_INIT */
#define VCC_USBH TEGRA_GPIO(T, 6)
#define VCC_USBH_V1_0 TEGRA_GPIO(N, 5)
#define VCC_USBO1 TEGRA_GPIO(T, 5)
#define VCC_USBO1_V1_0 TEGRA_GPIO(N, 4)
int arch_misc_init(void)
{
@ -32,6 +37,38 @@ int arch_misc_init(void)
NVBOOTTYPE_RECOVERY)
printf("USB recovery mode\n");
/* PCB Version Indication: V1.2 and later have GPIO_PV0 wired to GND */
gpio_request(TEGRA_GPIO(V, 0), "PCB Version Indication");
gpio_direction_input(TEGRA_GPIO(V, 0));
if (gpio_get_value(TEGRA_GPIO(V, 0))) {
/*
* if using the default device tree for new V1.2 and later HW,
* use version for older V1.0 and V1.1 HW
*/
char *fdt_env = env_get("fdt_module");
if (fdt_env && !strcmp(FDT_MODULE, fdt_env)) {
env_set("fdt_module", FDT_MODULE_V1_0);
printf("patching fdt_module to " FDT_MODULE_V1_0
" for older V1.0 and V1.1 HW\n");
#ifndef CONFIG_ENV_IS_NOWHERE
env_save();
#endif
}
/* activate USB power enable GPIOs */
gpio_request(VCC_USBH_V1_0, "VCC_USBH");
gpio_direction_output(VCC_USBH_V1_0, 1);
gpio_request(VCC_USBO1_V1_0, "VCC_USBO1");
gpio_direction_output(VCC_USBO1_V1_0, 1);
} else {
/* activate USB power enable GPIOs */
gpio_request(VCC_USBH, "VCC_USBH");
gpio_direction_output(VCC_USBH, 1);
gpio_request(VCC_USBO1, "VCC_USBO1");
gpio_direction_output(VCC_USBO1, 1);
}
return 0;
}

View File

@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (c) 2016, Toradex, Inc.
* Copyright (c) 2016-2019, Toradex, Inc.
*/
#ifndef _PINMUX_CONFIG_APALIS_TK1_H_
@ -24,8 +24,6 @@ static const struct tegra_gpio_config apalis_tk1_gpio_inits[] = {
GPIO_INIT(K, 2, IN),
GPIO_INIT(K, 7, IN),
GPIO_INIT(N, 2, OUT1),
GPIO_INIT(N, 4, OUT1),
GPIO_INIT(N, 5, OUT1),
GPIO_INIT(N, 7, IN),
GPIO_INIT(O, 5, IN),
GPIO_INIT(Q, 0, OUT0), /* Shift_CTRL_OE[0] */
@ -40,6 +38,7 @@ static const struct tegra_gpio_config apalis_tk1_gpio_inits[] = {
GPIO_INIT(R, 2, OUT0), /* Shift_CTRL_OE[3] */
GPIO_INIT(S, 3, OUT0), /* Shift_CTRL_Dir_In[2] */
GPIO_INIT(U, 4, OUT0), /* RESET_MOCI_CTRL */
GPIO_INIT(V, 0, IN),
GPIO_INIT(W, 3, IN),
GPIO_INIT(W, 5, IN),
GPIO_INIT(BB, 0, IN),
@ -130,8 +129,8 @@ static const struct pmux_pingrp_config apalis_tk1_pingrps[] = {
PINCFG(DAP1_DIN_PN1, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
PINCFG(DAP1_DOUT_PN2, SATA, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(DAP1_SCLK_PN3, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
PINCFG(USB_VBUS_EN0_PN4, RSVD2, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
PINCFG(USB_VBUS_EN1_PN5, RSVD2, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
PINCFG(USB_VBUS_EN0_PN4, RSVD2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
PINCFG(USB_VBUS_EN1_PN5, RSVD2, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT),
PINCFG(HDMI_INT_PN7, RSVD1, DOWN, TRISTATE, INPUT, DEFAULT, NORMAL),
PINCFG(ULPI_DATA7_PO0, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
PINCFG(ULPI_DATA0_PO1, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
@ -175,8 +174,8 @@ static const struct pmux_pingrp_config apalis_tk1_pingrps[] = {
PINCFG(KB_ROW15_PS7, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
PINCFG(KB_ROW16_PT0, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
PINCFG(KB_ROW17_PT1, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
PINCFG(GEN2_I2C_SCL_PT5, I2C2, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
PINCFG(GEN2_I2C_SDA_PT6, I2C2, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
PINCFG(GEN2_I2C_SCL_PT5, RSVD2, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
PINCFG(GEN2_I2C_SDA_PT6, RSVD2, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
PINCFG(SDMMC4_CMD_PT7, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
PINCFG(PU0, UARTA, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(PU1, UARTA, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT),
@ -185,12 +184,12 @@ static const struct pmux_pingrp_config apalis_tk1_pingrps[] = {
PINCFG(PU4, GMI, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(PU5, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
PINCFG(PU6, PWM3, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(PV0, RSVD1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
PINCFG(PV0, RSVD1, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
PINCFG(PV1, RSVD1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
PINCFG(SDMMC3_CD_N_PV2, RSVD3, UP, TRISTATE, INPUT, DEFAULT, DEFAULT),
PINCFG(SDMMC1_WP_N_PV3, SDMMC1, UP, TRISTATE, INPUT, DEFAULT, DEFAULT),
PINCFG(DDC_SCL_PV4, RSVD2, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
PINCFG(DDC_SDA_PV5, RSVD2, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
PINCFG(DDC_SCL_PV4, I2C4, NORMAL, NORMAL, INPUT, DEFAULT, NORMAL),
PINCFG(DDC_SDA_PV5, I2C4, NORMAL, NORMAL, INPUT, DEFAULT, NORMAL),
PINCFG(GPIO_W2_AUD_PW2, SPI2, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(GPIO_W3_AUD_PW3, SPI6, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT),
PINCFG(DAP_MCLK1_PW4, EXTPERIPH1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),

View File

@ -8,7 +8,7 @@ CONFIG_TARGET_APALIS_TK1=y
CONFIG_FIT=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_BOOTDELAY=1
CONFIG_BOOTCOMMAND="run emmcboot; setenv fdtfile ${soc}-apalis-${fdt_board}.dtb && run distro_bootcmd"
CONFIG_BOOTCOMMAND="run emmcboot; setenv fdtfile ${soc}-${fdt-module}-${fdt_board}.dtb && run distro_bootcmd"
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y
CONFIG_VERSION_VARIABLE=y

View File

@ -18,6 +18,9 @@
#define CONFIG_TEGRA_ENABLE_UARTA
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
#define FDT_MODULE "apalis-v1.2"
#define FDT_MODULE_V1_0 "apalis"
/* Environment in eMMC, before config block at the end of 1st "boot sector" */
#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \
CONFIG_TDX_CFG_BLOCK_OFFSET)
@ -58,7 +61,7 @@
"emmcbootpart=1\0" \
"emmcdev=0\0" \
"emmcdtbload=setenv dtbparam; load mmc ${emmcdev}:${emmcbootpart} " \
"${fdt_addr_r} ${soc}-apalis-${fdt_board}.dtb && " \
"${fdt_addr_r} ${soc}-${fdt_module}-${fdt_board}.dtb && " \
"setenv dtbparam ${fdt_addr_r}\0" \
"emmcfinduuid=part uuid mmc ${mmcdev}:${emmcrootpart} uuid\0" \
"emmcrootpart=2\0"
@ -70,7 +73,7 @@
"run nfsdtbload; dhcp ${kernel_addr_r} " \
"&& run fdt_fixup && bootz ${kernel_addr_r} - ${dtbparam}\0" \
"nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} " \
"${soc}-apalis-${fdt_board}.dtb " \
"${soc}-${fdt_module}-${fdt_board}.dtb " \
"&& setenv dtbparam ${fdt_addr_r}\0"
#define SD_BOOTCMD \
@ -85,7 +88,7 @@
"sdbootpart=1\0" \
"sddev=1\0" \
"sddtbload=setenv dtbparam; load mmc ${sddev}:${sdbootpart} " \
"${fdt_addr_r} ${soc}-apalis-${fdt_board}.dtb " \
"${fdt_addr_r} ${soc}-${fdt_module}-${fdt_board}.dtb " \
"&& setenv dtbparam ${fdt_addr_r}\0" \
"sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
"sdrootpart=2\0"
@ -102,7 +105,7 @@
"usbbootpart=1\0" \
"usbdev=0\0" \
"usbdtbload=setenv dtbparam; load usb ${usbdev}:${usbbootpart} " \
"${fdt_addr_r} ${soc}-apalis-${fdt_board}.dtb " \
"${fdt_addr_r} ${soc}-${fdt_module}-${fdt_board}.dtb " \
"&& setenv dtbparam ${fdt_addr_r}\0" \
"usbfinduuid=part uuid usb ${usbdev}:${usbrootpart} uuid\0" \
"usbrootpart=2\0"
@ -117,6 +120,7 @@
EMMC_BOOTCMD \
"fdt_board=eval\0" \
"fdt_fixup=;\0" \
"fdt_module=" FDT_MODULE "\0" \
NFS_BOOTCMD \
SD_BOOTCMD \
USB_BOOTCMD \