imx: imx7d-sdb: Add DM QSPI support

On iMX7D SabreSD board, the QSPI has pins conflict with EPDC (default).
To use QSPI, users have to rework the board (de-populate R388-R391, R396-R399
populate R392-R395, R299, R300). So we add new DTS file and new defconfig
dedicated for QSPI.

Other changes to support the DM QSPI:
 - Add QSPI node and alias spi0.
 - Modify spi4 (spi-gpio) node and add alias spi5 for it to avoid req
   conflict
 - Add EPDC node in imx7d.dtsi and disable it in imx7d-sdb-qspi.dts to
   align with kernel and also present the conflict.
 - Add -u-boot.dtsi to modify compatible string of mx25l51245g@0 to
   "spi-flash"
 - Remove iomux settings of qspi in board codes which is not needed
   for DM driver.

Signed-off-by: Ye Li <ye.li@nxp.com>
This commit is contained in:
Ye Li 2018-06-27 19:30:53 -07:00 committed by Stefano Babic
parent 0925ee2185
commit 3b82335015
9 changed files with 175 additions and 25 deletions

View File

@ -445,7 +445,8 @@ dtb-$(CONFIG_MX6UL) += \
dtb-$(CONFIG_MX6ULL) += imx6ull-14x14-evk.dtb
dtb-$(CONFIG_MX7) += imx7-colibri.dtb \
imx7d-sdb.dtb
imx7d-sdb.dtb \
imx7d-sdb-qspi.dtb
dtb-$(CONFIG_ARCH_MX7ULP) += imx7ulp-evk.dtb

View File

@ -0,0 +1,10 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2018 NXP
*/
&qspi1 {
flash0: mx25l51245g@0 {
compatible = "spi-flash";
};
};

View File

@ -0,0 +1,44 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2015 Freescale Semiconductor, Inc.
* Copyright 2018 NXP
*/
#include "imx7d-sdb.dts"
/* disable epdc, conflict with qspi */
&epdc {
status = "disabled";
};
&iomuxc {
qspi1 {
pinctrl_qspi1_1: qspi1grp_1 {
fsl,pins = <
MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 0x51
MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1 0x51
MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2 0x51
MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3 0x51
MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK 0x51
MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B 0x51
>;
};
};
};
&qspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_qspi1_1>;
status = "okay";
ddrsmp=<0>;
flash0: mx25l51245g@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "macronix,mx25l51245g";
spi-max-frequency = <29000000>;
/* take off one dummy cycle */
spi-nor,ddr-quad-read-dummy = <5>;
reg = <0>;
};
};

View File

@ -11,11 +11,15 @@
model = "Freescale i.MX7 SabreSD Board";
compatible = "fsl,imx7d-sdb", "fsl,imx7d";
aliases {
spi5 = &soft_spi;
};
memory {
reg = <0x80000000 0x80000000>;
};
spi4 {
soft_spi: soft-spi {
compatible = "spi-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;

View File

@ -86,6 +86,18 @@
};
};
&aips2 {
epdc: epdc@306f0000 {
compatible = "fsl,imx7d-epdc";
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x306f0000 0x10000>;
clocks = <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_EPDC_PIXEL_ROOT_CLK>;
clock-names = "epdc_axi", "epdc_pix";
epdc-ram = <&gpr 0x4 30>;
status = "disabled";
};
};
&aips3 {
usbotg2: usb@30b20000 {
compatible = "fsl,imx7d-usb", "fsl,imx27-usb";

View File

@ -82,10 +82,11 @@
serial4 = &uart5;
serial5 = &uart6;
serial6 = &uart7;
spi0 = &ecspi1;
spi1 = &ecspi2;
spi2 = &ecspi3;
spi3 = &ecspi4;
spi0 = &qspi1;
spi1 = &ecspi1;
spi2 = &ecspi2;
spi3 = &ecspi3;
spi4 = &ecspi4;
};
cpus {
@ -1072,6 +1073,19 @@
status = "disabled";
};
qspi1: qspi@30bb0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx7d-qspi";
reg = <0x30bb0000 0x10000>, <0x60000000 0x10000000>;
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_QSPI_ROOT_CLK>,
<&clks IMX7D_QSPI_ROOT_CLK>;
clock-names = "qspi_en", "qspi";
status = "disabled";
};
sdma: sdma@30bd0000 {
compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma";
reg = <0x30bd0000 0x10000>;

View File

@ -36,9 +36,6 @@ DECLARE_GLOBAL_DATA_PTR;
#define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_PU100KOHM | \
PAD_CTL_DSE_3P3V_49OHM)
#define QSPI_PAD_CTRL \
(PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_PUE | PAD_CTL_PUS_PU47KOHM)
#define NAND_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_SRE_SLOW | PAD_CTL_HYS)
#define SPI_PAD_CTRL \
@ -278,21 +275,8 @@ int board_phy_config(struct phy_device *phydev)
#endif
#ifdef CONFIG_FSL_QSPI
static iomux_v3_cfg_t const quadspi_pads[] = {
MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 | MUX_PAD_CTRL(QSPI_PAD_CTRL),
MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1 | MUX_PAD_CTRL(QSPI_PAD_CTRL),
MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2 | MUX_PAD_CTRL(QSPI_PAD_CTRL),
MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3 | MUX_PAD_CTRL(QSPI_PAD_CTRL),
MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK | MUX_PAD_CTRL(QSPI_PAD_CTRL),
MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B | MUX_PAD_CTRL(QSPI_PAD_CTRL),
};
int board_qspi_init(void)
{
/* Set the iomux */
imx_iomux_v3_setup_multiple_pads(quadspi_pads,
ARRAY_SIZE(quadspi_pads));
/* Set the clock */
set_clk_qspi();

View File

@ -0,0 +1,83 @@
CONFIG_ARM=y
CONFIG_ARCH_MX7=y
CONFIG_SYS_TEXT_BASE=0x87800000
CONFIG_TARGET_MX7DSABRESD=y
CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
# CONFIG_ARMV7_VIRT is not set
CONFIG_IMX_RDC=y
CONFIG_IMX_BOOTAUX=y
# CONFIG_CMD_BMODE is not set
CONFIG_DEFAULT_DEVICE_TREE="imx7d-sdb-qspi"
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7dsabresd/imximage.cfg"
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_BOOTD is not set
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_EXPORTENV is not set
# CONFIG_CMD_IMPORTENV is not set
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_DFU=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_BMP=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_OF_CONTROL=y
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
CONFIG_DM_GPIO=y
CONFIG_DM_74X164=y
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
CONFIG_MMC_IO_VOLTAGE=y
CONFIG_MMC_UHS_SUPPORT=y
CONFIG_MMC_HS200_SUPPORT=y
CONFIG_FSL_ESDHC=y
CONFIG_FSL_QSPI=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_EON=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_PHYLIB=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX7=y
CONFIG_DM_PMIC=y
CONFIG_DM_PMIC_PFUZE100=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_PFUZE100=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SOFT_SPI=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_MXC_USB_OTG_HACTIVE=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="FSL"
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_CI_UDC=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_VIDEO=y
CONFIG_ERRNO_STR=y

View File

@ -225,9 +225,7 @@
#endif
#ifdef CONFIG_FSL_QSPI
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_MACRONIX
#define CONFIG_SPI_FLASH_BAR
#define CONFIG_SYS_FSL_QSPI_AHB
#define CONFIG_SF_DEFAULT_BUS 0
#define CONFIG_SF_DEFAULT_CS 0
#define CONFIG_SF_DEFAULT_SPEED 40000000