brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-06-09 23:36:03 +09:00
Code Issues Projects Releases Wiki Activity

imx: sync with kernel device tree for Phycore SoM

Browse Source 
Sync the Linux Kernel 5.4-rc6 device tree for Phytec Phycore
SoM and Segin board based on imx6UL and imx6ULL.

Changes includes Phytec naming convention for the devicetree files.

Signed-off-by: Parthiban Nallathambi <parthitce@gmail.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
This commit is contained in:
Parthiban Nallathambi 2019-11-04 19:50:07 +01:00 committed by Stefano Babic
parent 89038264bb
commit d98929d636
14 changed files with 736 additions and 243 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
arch/arm/dts/Makefile
View File

@ -663,14 +663,14 @@ dtb-$(CONFIG_MX6UL) += \
imx6ul-9x9-evk.dtb \
imx6ul-9x9-evk.dtb \
imx6ul-liteboard.dtb \
imx6ul-phycore-segin.dtb \
imx6ul-phytec-segin-ff-rdk-nand.dtb \
imx6ul-pico-hobbit.dtb \
imx6ul-pico-pi.dtb
dtb-$(CONFIG_MX6ULL) += \
imx6ull-14x14-evk.dtb \
imx6ull-colibri.dtb \
imx6ull-phycore-segin.dtb \
imx6ull-phytec-segin-ff-rdk-emmc.dtb \
imx6ull-dart-6ul.dtb \
imx6ulz-14x14-evk.dtb

81
arch/arm/dts/imx6ul-phycore-segin.dts
View File

@ -1,81 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2018 Collabora Ltd.
*
* Based on dts[i] from Phytec barebox port:
* Copyright (C) 2016 PHYTEC Messtechnik GmbH
* Author: Christian Hemp <c.hemp@phytec.de>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "imx6ul.dtsi"
#include "pcl063-common.dtsi"
/ {
model = "Phytec phyBOARD-i.MX6UL-Segin SBC";
compatible = "phytec,phyboard-imx6ul-segin", "phytec,imx6ul-pcl063",
"fsl,imx6ul";
};
&gpmi {
status = "okay";
};
&i2c1 {
i2c_rtc: rtc@68 {
compatible = "microcrystal,rv4162";
reg = <0x68>;
status = "okay";
};
};
&uart5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5>;
uart-has-rtscts;
status = "okay";
};
&usbotg1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb_otg1_id>;
dr_mode = "otg";
srp-disable;
hnp-disable;
adp-disable;
status = "okay";
};
&usbotg2 {
dr_mode = "host";
disable-over-current;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl_uart5: uart5grp {
fsl,pins = <
MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1
MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1
MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x1b0b1
MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x1b0b1
>;
};
pinctrl_usb_otg1_id: usbotg1idgrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059
>;
};
};

138
arch/arm/dts/pcl063-common.dtsi → arch/arm/dts/imx6ul-phytec-phycore-som.dtsi
View File

@ -1,39 +1,57 @@
// SPDX-License-Identifier: GPL-2.0+
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2018 Collabora Ltd.
*
* Based on dts[i] from Phytec barebox port:
* Copyright (C) 2016 PHYTEC Messtechnik GmbH
* Author: Christian Hemp <c.hemp@phytec.de>
*/
/ {
model = "Phytec phyCORE-i.MX6 Ultra Lite SOM";
compatible = "phytec,imx6ul-pcl063", "fsl,imx6ul";
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pwm/pwm.h>
memory {
reg = <0x80000000 0x20000000>;
};
/ {
model = "PHYTEC phyCORE-i.MX6 UltraLite";
compatible = "phytec,imx6ul-pcl063", "fsl,imx6ul";
chosen {
stdout-path = &uart1;
};
memory {
device_type = "memory";
reg = <0x80000000 0x20000000>;
};
gpio_leds_som: leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpioleds_som>;
compatible = "gpio-leds";
phycore-green {
gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet1>;
phy-mode = "rmii";
phy-handle = <&ethphy0>;
status = "okay";
phy-handle = <&ethphy1>;
status = "disabled";
mdio: mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@1 {
ethphy1: ethernet-phy@1 {
reg = <1>;
interrupt-parent = <&gpio1>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
micrel,led-mode = <1>;
clocks = <&clks IMX6UL_CLK_ENET_REF>;
clock-names = "rmii-ref";
status = "disabled";
};
};
};
@ -42,89 +60,61 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand>;
nand-on-flash-bbt;
fsl,no-blockmark-swap;
status = "disabled";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x0 0x400000>;
};
partition@400000 {
label = "uboot-env";
reg = <0x400000 0x100000>;
};
partition@500000 {
label = "root";
reg = <0x500000 0x0>;
};
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default", "gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
scl-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
sda-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
clock-frequency = <100000>;
status = "okay";
eeprom@52 {
compatible = "cat,24c32";
compatible = "catalyst,24c32", "atmel,24c32";
reg = <0x52>;
};
};
&snvs_poweroff {
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
bus-width = <0x4>;
pinctrl-0 = <&pinctrl_usdhc1>;
no-1-8-v;
status = "okay";
};
&usdhc2 {
u-boot,dm-spl;
u-boot,dm-pre-reloc;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <8>;
no-1-8-v;
non-removable;
keep-power-in-suspend;
status = "disabled";
};
&iomuxc {
pinctrl-names = "default";
pinctrl_enet1: enet1grp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0
MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x10010
MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x10010
MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b010
MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b010
MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b010
MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b010
MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x17059
>;
};
pinctrl_gpioleds_som: gpioledssomgrp {
fsl,pins = <MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0>;
};
pinctrl_gpmi_nand: gpminandgrp {
fsl,pins = <
MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0x0b0b1
@ -147,35 +137,15 @@
pinctrl_i2c1: i2cgrp {
fsl,pins = <
MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
>;
};
pinctrl_i2c1_gpio: i2c1grp_gpio {
fsl,pins = <
MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x1b8b0
MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x1b8b0
MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
>;
};
@ -191,7 +161,7 @@
MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9
MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9
MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9
MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x170f9
>;
};
};

93
arch/arm/dts/imx6ul-phytec-segin-ff-rdk-nand.dts Normal file
View File

@ -0,0 +1,93 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2016 PHYTEC Messtechnik GmbH
* Author: Christian Hemp <c.hemp@phytec.de>
*/
/dts-v1/;
#include "imx6ul.dtsi"
#include "imx6ul-phytec-phycore-som.dtsi"
#include "imx6ul-phytec-segin.dtsi"
#include "imx6ul-phytec-segin-peb-eval-01.dtsi"
/ {
model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured with NAND";
compatible = "phytec,imx6ul-pbacd10-nand", "phytec,imx6ul-pbacd10",
"phytec,imx6ul-pcl063", "fsl,imx6ul";
};
&adc1 {
status = "okay";
};
&can1 {
status = "okay";
};
&tlv320 {
status = "okay";
};
&ecspi3 {
status = "okay";
};
&ethphy1 {
status = "okay";
};
&ethphy2 {
status = "okay";
};
&fec1 {
status = "okay";
};
&fec2 {
status = "okay";
};
&gpmi {
status = "okay";
};
&i2c_rtc {
status = "okay";
};
&reg_can1_en {
status = "okay";
};
&reg_sound_1v8 {
status = "okay";
};
&reg_sound_3v3 {
status = "okay";
};
&sai2 {
status = "okay";
};
&sound {
status = "okay";
};
&uart5 {
status = "okay";
};
&usbotg1 {
status = "okay";
};
&usbotg2 {
status = "okay";
};
&usdhc1 {
status = "okay";
};

57
arch/arm/dts/imx6ul-phytec-segin-peb-eval-01.dtsi Normal file
View File

@ -0,0 +1,57 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2016 PHYTEC Messtechnik
* Author: Christian Hemp <c.hemp@phytec.de>
*/
#include <dt-bindings/input/input.h>
/ {
gpio_keys: gpio-keys {
compatible = "gpio-key";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
status = "disabled";
power {
label = "Power Button";
gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
};
user_leds: user-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_user_leds>;
status = "disabled";
user-led1 {
gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "gpio";
default-state = "on";
};
user-led2 {
gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "gpio";
default-state = "on";
};
};
};
&iomuxc {
pinctrl_gpio_keys: gpio_keysgrp {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x79
>;
};
pinctrl_user_leds: user_ledsgrp {
fsl,pins = <
MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x79
MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x79
>;
};
};

346
arch/arm/dts/imx6ul-phytec-segin.dtsi Normal file
View File

@ -0,0 +1,346 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2016 PHYTEC Messtechnik GmbH
* Author: Christian Hemp <c.hemp@phytec.de>
*/
/ {
model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite";
compatible = "phytec,imx6ul-pbacd-10", "phytec,imx6ul-pcl063", "fsl,imx6ul";
aliases {
rtc0 = &i2c_rtc;
rtc1 = &snvs_rtc;
};
reg_sound_1v8: regulator-1v8 {
compatible = "regulator-fixed";
regulator-name = "i2s-audio-1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
status = "disabled";
};
reg_sound_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "i2s-audio-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
status = "disabled";
};
reg_can1_en: regulator-can1 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&princtrl_flexcan1_en>;
regulator-name = "Can";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
status = "disabled";
};
reg_adc1_vref_3v3: regulator-vref-3v3 {
compatible = "regulator-fixed";
regulator-name = "vref-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
sound: sound {
compatible = "simple-audio-card";
simple-audio-card,name = "phyBOARD-Segin-TLV320AIC3007";
simple-audio-card,format = "i2s";
simple-audio-card,bitclock-master = <&dailink_master>;
simple-audio-card,frame-master = <&dailink_master>;
simple-audio-card,widgets =
"Line", "Line In",
"Line", "Line Out",
"Speaker", "Speaker";
simple-audio-card,routing =
"Line Out", "LLOUT",
"Line Out", "RLOUT",
"Speaker", "SPOP",
"Speaker", "SPOM",
"LINE1L", "Line In",
"LINE1R", "Line In";
status = "disabled";
simple-audio-card,cpu {
sound-dai = <&sai2>;
};
dailink_master: simple-audio-card,codec {
sound-dai = <&tlv320>;
clocks = <&clks IMX6UL_CLK_SAI2>;
};
};
};
&adc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_adc1>;
vref-supply = <&reg_adc1_vref_3v3>;
/*
* driver can not separate a specific channel so we request 4 channels
* here - we need only the fourth channel
*/
num-channels = <4>;
status = "disabled";
};
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
xceiver-supply = <&reg_can1_en>;
status = "disabled";
};
&clks {
assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
assigned-clock-rates = <786432000>;
};
&ecspi3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3>;
cs-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
&fec2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet2>;
phy-mode = "rmii";
phy-handle = <&ethphy2>;
status = "disabled";
};
&i2c1 {
tlv320: codec@18 {
compatible = "ti,tlv320aic3007";
#sound-dai-cells = <0>;
reg = <0x18>;
AVDD-supply = <&reg_sound_3v3>;
IOVDD-supply = <&reg_sound_3v3>;
DRVDD-supply = <&reg_sound_3v3>;
DVDD-supply = <&reg_sound_1v8>;
status = "disabled";
};
stmpe: touchscreen@44 {
compatible = "st,stmpe811";
reg = <0x44>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&gpio5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_stmpe>;
status = "disabled";
touchscreen {
compatible = "st,stmpe-ts";
st,sample-time = <4>;
st,mod-12b = <1>;
st,ref-sel = <0>;
st,adc-freq = <1>;
st,ave-ctrl = <1>;
st,touch-det-delay = <2>;
st,settling = <2>;
st,fraction-z = <7>;
st,i-drive = <1>;
touchscreen-inverted-x = <1>;
touchscreen-inverted-y = <1>;
};
};
i2c_rtc: rtc@68 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rtc_int>;
compatible = "microcrystal,rv4162";
reg = <0x68>;
interrupt-parent = <&gpio5>;
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
status = "disabled";
};
};
&mdio {
ethphy2: ethernet-phy@2 {
reg = <2>;
micrel,led-mode = <1>;
clocks = <&clks IMX6UL_CLK_ENET2_REF>;
clock-names = "rmii-ref";
status = "disabled";
};
};
&pwm3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
status = "disabled";
};
&sai2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai2>;
assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
<&clks IMX6UL_CLK_SAI2>;
assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
assigned-clock-rates = <0>, <19200000>;
fsl,sai-mclk-direction-output;
status = "disabled";
};
&uart5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5>;
uart-has-rtscts;
status = "disabled";
};
&usbotg1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb_otg1_id>;
dr_mode = "otg";
status = "disabled";
};
&usbotg2 {
dr_mode = "host";
disable-over-current;
status = "disabled";
};
&usdhc1 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
no-1-8-v;
keep-power-in-suspend;
wakeup-source;
status = "disabled";
};
&iomuxc {
pinctrl_adc1: adc1grp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
>;
};
pinctrl_ecspi3: ecspi3grp {
fsl,pins = <
MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x10b0
MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x10b0
MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x10b0
MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x10b0
>;
};
pinctrl_enet2: enet2grp {
fsl,pins = <
MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b010
MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b010
MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b010
MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b010
>;
};
pinctrl_flexcan1: flexcan1 {
fsl,pins = <
MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0
MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0
>;
};
princtrl_flexcan1_en: flexcan1engrp {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x17059
>;
};
pinctrl_pwm3: pwm3grp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x0b0b0
>;
};
pinctrl_rtc_int: rtcintgrp {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17059
>;
};
pinctrl_sai2: sai2grp {
fsl,pins = <
MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088
MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088
MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088
MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088
MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088
>;
};
pinctrl_stmpe: stmpegrp {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059
>;
};
pinctrl_uart5: uart5grp {
fsl,pins = <
MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1
MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1
MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x1b0b1
MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x1b0b1
>;
};
pinctrl_usb_otg1_id: usbotg1idgrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059
>;
};
pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
>;
};
pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
>;
};
};

70
arch/arm/dts/imx6ull-phycore-segin.dts
View File

@ -1,70 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2019 Parthiban Nallathambi <parthitce@gmail.com>
*/
/dts-v1/;
#include "imx6ull.dtsi"
#include "pcl063-common.dtsi"
/ {
model = "Phytec phyBOARD-i.MX6ULL-Segin SBC";
compatible = "phytec,phyboard-imx6ull-segin", "phytec,imx6ull-pcl063",
"fsl,imx6ull";
};
&i2c1 {
i2c_rtc: rtc@68 {
compatible = "microcrystal,rv4162";
reg = <0x68>;
status = "okay";
};
};
&uart5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5>;
uart-has-rtscts;
status = "okay";
};
&usdhc2 {
status = "okay";
};
&usbotg1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb_otg1_id>;
dr_mode = "otg";
srp-disable;
hnp-disable;
adp-disable;
status = "okay";
};
&usbotg2 {
dr_mode = "host";
disable-over-current;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl_uart5: uart5grp {
fsl,pins = <
MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1
MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1
MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x1b0b1
MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x1b0b1
>;
};
pinctrl_usb_otg1_id: usbotg1idgrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059
>;
};
};

24
arch/arm/dts/imx6ull-phytec-phycore-som.dtsi Normal file
View File

@ -0,0 +1,24 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2019 PHYTEC Messtechnik GmbH
* Author: Stefan Riedmueller <s.riedmueller@phytec.de>
*/
#include "imx6ul-phytec-phycore-som.dtsi"
/ {
model = "PHYTEC phyCORE-i.MX6 ULL";
compatible = "phytec,imx6ull-pcl063", "fsl,imx6ull";
};
&iomuxc {
/delete-node/ gpioledssomgrp;
};
&iomuxc_snvs {
pinctrl_gpioleds_som: gpioledssomgrp {
fsl,pins = <
MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0
>;
};
};

93
arch/arm/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts Normal file
View File

@ -0,0 +1,93 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2019 PHYTEC Messtechnik GmbH
* Author: Stefan Riedmueller <s.riedmueller@phytec.de>
*/
/dts-v1/;
#include "imx6ull.dtsi"
#include "imx6ull-phytec-phycore-som.dtsi"
#include "imx6ull-phytec-segin.dtsi"
#include "imx6ull-phytec-segin-peb-eval-01.dtsi"
/ {
model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with eMMC";
compatible = "phytec,imx6ull-pbacd10-emmc", "phytec,imx6ull-pbacd10",
"phytec,imx6ull-pcl063","fsl,imx6ull";
};
&adc1 {
status = "okay";
};
&can1 {
status = "okay";
};
&tlv320 {
status = "okay";
};
&ecspi3 {
status = "okay";
};
&ethphy1 {
status = "okay";
};
&ethphy2 {
status = "okay";
};
&fec1 {
status = "okay";
};
&fec2 {
status = "okay";
};
&i2c_rtc {
status = "okay";
};
&reg_can1_en {
status = "okay";
};
&reg_sound_1v8 {
status = "okay";
};
&reg_sound_3v3 {
status = "okay";
};
&sai2 {
status = "okay";
};
&sound {
status = "okay";
};
&uart5 {
status = "okay";
};
&usbotg1 {
status = "okay";
};
&usbotg2 {
status = "okay";
};
&usdhc1 {
status = "okay";
};
&usdhc2 {
status = "okay";
};

19
arch/arm/dts/imx6ull-phytec-segin-peb-eval-01.dtsi Normal file
View File

@ -0,0 +1,19 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2019 PHYTEC Messtechnik GmbH
* Author: Stefan Riedmueller <s.riedmueller@phytec.de>
*/
#include "imx6ul-phytec-segin-peb-eval-01.dtsi"
&iomuxc {
/delete-node/ gpio_keysgrp;
};
&iomuxc_snvs {
pinctrl_gpio_keys: gpio_keysgrp {
fsl,pins = <
MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x79
>;
};
};

38
arch/arm/dts/imx6ull-phytec-segin.dtsi Normal file
View File

@ -0,0 +1,38 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2019 PHYTEC Messtechnik GmbH
* Author: Stefan Riedmueller <s.riedmueller@phytec.de>
*/
#include "imx6ul-phytec-segin.dtsi"
/ {
model = "PHYTEC phyBOARD-Segin i.MX6 ULL";
compatible = "phytec,imx6ull-pbacd-10", "phytec,imx6ull-pcl063","fsl,imx6ull";
};
&iomuxc {
/delete-node/ flexcan1engrp;
/delete-node/ rtcintgrp;
/delete-node/ stmpegrp;
};
&iomuxc_snvs {
princtrl_flexcan1_en: flexcan1engrp {
fsl,pins = <
MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x17059
>;
};
pinctrl_rtc_int: rtcintgrp {
fsl,pins = <
MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17059
>;
};
pinctrl_stmpe: stmpegrp {
fsl,pins = <
MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059
>;
};
};

12
board/phytec/pcl063/MAINTAINERS
View File

@ -2,10 +2,14 @@ PCL063 BOARD
M: Martyn Welch <martyn.welch@collabora.com>
M: Parthiban Nallathambi <parthitce@gmail.com>
S: Maintained
F: arch/arm/dts/imx6ul-pcl063.dtsi
F: arch/arm/dts/imx6ul-phycore-segin.dts
F: arch/arm/dts/imx6ull-phycore-segin.dts
F: arch/arm/dts/pcl063-common.dtsi
F: arch/arm/dts/imx6ul-phytec-phycore-som.dtsi
F: arch/arm/dts/imx6ul-phytec-segin-peb-eval-01.dtsi
F: arch/arm/dts/imx6ul-phytec-segin.dtsi
F: arch/arm/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
F: arch/arm/dts/imx6ull-phytec-phycore-som.dtsi
F: arch/arm/dts/imx6ull-phytec-segin-peb-eval-01.dtsi
F: arch/arm/dts/imx6ull-phytec-segin.dtsi
F: arch/arm/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts
F: arch/arm/dts/imx6ull-u-boot.dtsi
F: board/phytec/pcl063/
F: configs/phycore_pcl063_defconfig

2
configs/phycore_pcl063_defconfig
View File

@ -33,7 +33,7 @@ CONFIG_MTDPARTS_DEFAULT="gpmi-nand:4m(uboot),1m(env),-(root)"
CONFIG_CMD_UBI=y
# CONFIG_ISO_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="imx6ul-phycore-segin"
CONFIG_DEFAULT_DEVICE_TREE="imx6ul-phytec-segin-ff-rdk-nand"
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_DM_I2C_GPIO=y
CONFIG_SYS_I2C_MXC=y

2
configs/phycore_pcl063_ull_defconfig
View File

@ -29,7 +29,7 @@ CONFIG_CMD_USB_SDP=y
CONFIG_CMD_CACHE=y
# CONFIG_ISO_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="imx6ull-phycore-segin"
CONFIG_DEFAULT_DEVICE_TREE="imx6ull-phytec-segin-ff-rdk-emmc"
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_DM_I2C_GPIO=y
CONFIG_SYS_I2C_MXC=y