u-boot-brain/arch/arm/dts/imx8qxp-capricorn-u-boot.dtsi
Anatolij Gustschin 7b5b934313 imx: add imx8x capricorn giedi board
Add support for i.MX8X based Capricorn Giedi SoM.

Supported interfaces: GPIO, ENET, eMMC, I2C, UART.

Console output:

  U-Boot SPL 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100)
  Trying to boot from MMC1
  Load image from MMC/SD 0x3e400

  U-Boot 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) ##v01.07

  CPU:   NXP i.MX8QXP RevB A35 at 1200 MHz at 30C

  Model: Siemens Giedi
  Board: Capricorn
  Boot:  MMC0
  DRAM:  1022 MiB
  MMC:   FSL_SDHC: 0
  Loading Environment from MMC... OK
  In:    serial@5a080000
  Out:   serial@5a080000
  Err:   serial@5a080000
  Net:   eth1: ethernet@5b050000 [PRIME]
  Autobooting in 1 seconds, press "<Esc><Esc>" to stop

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-01-14 22:15:21 +01:00

134 lines
1.1 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2019 Siemens AG
*/
&{/imx8qx-pm} {
u-boot,dm-spl;
};
&mu {
u-boot,dm-spl;
};
&clk {
u-boot,dm-spl;
};
&iomuxc {
u-boot,dm-spl;
};
&pd_lsio {
u-boot,dm-spl;
};
&pd_lsio_gpio0 {
u-boot,dm-spl;
};
&pd_lsio_gpio1 {
u-boot,dm-spl;
};
&pd_lsio_gpio2 {
u-boot,dm-spl;
};
&pd_lsio_gpio3 {
u-boot,dm-spl;
};
&pd_lsio_gpio4 {
u-boot,dm-spl;
};
&pd_lsio_gpio5 {
u-boot,dm-spl;
};
&pd_lsio_gpio6 {
u-boot,dm-spl;
};
&pd_lsio_gpio7 {
u-boot,dm-spl;
};
&pd_dma {
u-boot,dm-spl;
};
&pd_dma_lpuart0 {
u-boot,dm-spl;
};
&pd_dma_lpuart2 {
u-boot,dm-spl;
};
&pd_conn {
u-boot,dm-spl;
};
&pd_conn_sdch0 {
u-boot,dm-spl;
};
&pd_conn_sdch1 {
u-boot,dm-spl;
};
&pd_conn_sdch2 {
u-boot,dm-spl;
};
&gpio0 {
u-boot,dm-spl;
};
&gpio1 {
u-boot,dm-spl;
};
&gpio2 {
u-boot,dm-spl;
};
&gpio3 {
u-boot,dm-spl;
};
&gpio4 {
u-boot,dm-spl;
};
&gpio5 {
u-boot,dm-spl;
};
&gpio6 {
u-boot,dm-spl;
};
&gpio7 {
u-boot,dm-spl;
};
&lpuart0 {
u-boot,dm-spl;
};
&lpuart2 {
u-boot,dm-spl;
};
&usdhc1 {
u-boot,dm-spl;
};
&usdhc2 {
u-boot,dm-spl;
};