rockchip: rk3368: sync down rk3368-lion board devicetree from Linux
This brings the actual rk3368-lion devicetree files from Linux 5.10 instead of using something separate. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This commit is contained in:
parent
5aefa4af29
commit
ba421b96a2
|
@ -114,7 +114,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3328) += \
|
|||
rk3328-rock-pi-e.dtb
|
||||
|
||||
dtb-$(CONFIG_ROCKCHIP_RK3368) += \
|
||||
rk3368-lion.dtb \
|
||||
rk3368-lion-haikou.dtb \
|
||||
rk3368-sheep.dtb \
|
||||
rk3368-geekbox.dtb \
|
||||
rk3368-px5-evb.dtb \
|
||||
|
|
|
@ -38,6 +38,10 @@
|
|||
};
|
||||
};
|
||||
|
||||
&gpio2 {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
|
@ -0,0 +1,140 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2018 Theobroma Systems Design und Consulting GmbH
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "rk3368-lion.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Theobroma Systems RK3368-uQ7 Baseboard";
|
||||
compatible = "tsd,rk3368-lion-haikou", "rockchip,rk3368";
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
i2cmux2 {
|
||||
i2c@0 {
|
||||
eeprom: eeprom@50 {
|
||||
compatible = "atmel,24c01";
|
||||
pagesize = <8>;
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
pinctrl-0 = <&module_led_pins>, <&sd_card_led_pin>;
|
||||
|
||||
sd_card_led: led-3 {
|
||||
label = "sd_card_led";
|
||||
gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "mmc0";
|
||||
};
|
||||
};
|
||||
|
||||
dc_12v: dc-12v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "dc_12v";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
vcc3v3_baseboard: vcc3v3-baseboard {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_baseboard";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vcc5v0_otg: vcc5v0-otg-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&otg_vbus_drv>;
|
||||
regulator-name = "vcc5v0_otg";
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
cd-gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
max-frequency = <25000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
|
||||
rockchip,default-sample-phase = <90>;
|
||||
vmmc-supply = <&vcc3v3_baseboard>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
cs-gpios = <0>, <&gpio2 RK_PC3 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_otg {
|
||||
dr_mode = "otg";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
/* alternate function of GPIO5/6 */
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&haikou_pin_hog>;
|
||||
|
||||
hog {
|
||||
haikou_pin_hog: haikou-pin-hog {
|
||||
rockchip,pins =
|
||||
/* LID_BTN */
|
||||
<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
/* BATLOW# */
|
||||
<0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
/* SLP_BTN# */
|
||||
<3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
/* BIOS_DISABLE# */
|
||||
<3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
sd_card_led_pin: sd-card-led-pin {
|
||||
rockchip,pins =
|
||||
<0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sdmmc {
|
||||
sdmmc_cd_pin: sdmmc-cd-pin {
|
||||
rockchip,pins =
|
||||
<2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb_otg {
|
||||
otg_vbus_drv: otg-vbus-drv {
|
||||
rockchip,pins =
|
||||
<0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
|
@ -1,25 +1,14 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+ OR X11
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
|
||||
* Copyright (c) 2018 Theobroma Systems Design und Consulting GmbH
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "rk3368.dtsi"
|
||||
#include "rk3368-lion-u-boot.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Theobroma Systems RK3368-uQ7 SoM";
|
||||
compatible = "tsd,rk3368-uq7", "tsd,lion", "rockchip,rk3368";
|
||||
|
||||
aliases {
|
||||
mmc0 = &emmc;
|
||||
mmc1 = &sdmmc;
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x80000000>;
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
ext_gmac: gmac-clk {
|
||||
|
@ -29,6 +18,80 @@
|
|||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
i2cmux1 {
|
||||
compatible = "i2c-mux-gpio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
i2c-parent = <&i2c1>;
|
||||
mux-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
/* Q7_GPO_I2C */
|
||||
i2c@0 {
|
||||
reg = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
/* Q7_SMB */
|
||||
i2c@1 {
|
||||
reg = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
i2cmux2 {
|
||||
compatible = "i2c-mux-gpio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
i2c-parent = <&i2c2>;
|
||||
mux-gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
/* Q7_LVDS_BLC_I2C */
|
||||
i2c@0 {
|
||||
reg = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
fan: fan@18 {
|
||||
compatible = "ti,amc6821";
|
||||
reg = <0x18>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
rtc_twi: rtc@6f {
|
||||
compatible = "isil,isl1208";
|
||||
reg = <0x6f>;
|
||||
};
|
||||
};
|
||||
|
||||
/* Q7_GP2_I2C */
|
||||
i2c@1 {
|
||||
reg = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&module_led_pins>;
|
||||
|
||||
module_led1: led-1 {
|
||||
label = "module_led1";
|
||||
gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
panic-indicator;
|
||||
};
|
||||
|
||||
module_led2: led-2 {
|
||||
label = "module_led2";
|
||||
gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sys: vcc-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_sys";
|
||||
|
@ -39,43 +102,81 @@
|
|||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu_b2 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu_b3 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&emmc {
|
||||
status = "okay";
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
clock-frequency = <150000000>;
|
||||
disable-wp;
|
||||
keep-power-in-suspend;
|
||||
mmc-hs200-1_8v;
|
||||
non-removable;
|
||||
num-slots = <1>;
|
||||
vmmc-supply = <&vcc33_io>;
|
||||
vqmmc-supply = <&vcc18_io>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac {
|
||||
status = "okay";
|
||||
phy-supply = <&vcc33_io>;
|
||||
phy-mode = "rgmii";
|
||||
clock_in_out = "input";
|
||||
snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <2 10000 50000>;
|
||||
assigned-clocks = <&cru SCLK_MAC>;
|
||||
assigned-clock-parents = <&ext_gmac>;
|
||||
clock_in_out = "input";
|
||||
phy-handle = <&phy0>;
|
||||
phy-supply = <&vcc33_io>;
|
||||
phy-mode = "rgmii";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_pins>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 10000 50000>;
|
||||
snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
|
||||
tx_delay = <0x10>;
|
||||
rx_delay = <0x10>;
|
||||
status = "okay";
|
||||
|
||||
mdio {
|
||||
compatible = "snps,dwmac-mdio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
/* Microsemi VSC8531-02 */
|
||||
phy0: phy@0 {
|
||||
compatible = "ethernet-phy-id0007.0570";
|
||||
reg = <0>;
|
||||
vsc8531,clk-out-frequency = <125000000>;
|
||||
vsc8531,edge-slowdown = <7>;
|
||||
vsc8531,led-0-mode = <1>;
|
||||
vsc8531,led-1-mode = <2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
|
@ -85,7 +186,11 @@
|
|||
compatible = "rockchip,rk808";
|
||||
reg = <0x1b>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
|
||||
clock-output-names = "xin32k", "rk808-clkout2";
|
||||
#clock-cells = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>, <&pmic_sleep>;
|
||||
rockchip,system-power-controller;
|
||||
vcc1-supply = <&vcc_sys>;
|
||||
vcc2-supply = <&vcc_sys>;
|
||||
|
@ -98,97 +203,129 @@
|
|||
vcc10-supply = <&vcc_sys>;
|
||||
vcc11-supply = <&vcc_sys>;
|
||||
vcc12-supply = <&vcc_sys>;
|
||||
clock-output-names = "xin32k", "rk808-clkout2";
|
||||
#clock-cells = <1>;
|
||||
|
||||
regulators {
|
||||
vdd_cpu: DCDC_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vdd_log: DCDC_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vdd_log";
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-name = "vdd_log";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_ddr";
|
||||
};
|
||||
|
||||
vcc33_io: DCDC_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc33_io";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc33_io";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vcc33_video: LDO_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc33_video";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc33_video";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vdd10_pll: LDO_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vdd10_pll";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-name = "vdd10_pll";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vcc18_io: LDO_REG4 {
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc18_io";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc18_io";
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vdd10_video: LDO_REG6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vdd10_video";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-name = "vdd10_video";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vcc18_video: LDO_REG8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc18_video";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc18_video";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
leds {
|
||||
module_led_pins: module-led-pins {
|
||||
rockchip,pins =
|
||||
<2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
|
||||
<3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
pmic_sleep: pmic-sleep {
|
||||
rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
status = "okay";
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
spiflash: w25q32dw@0 {
|
||||
norflash: flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <49500000>;
|
||||
spi-cpol;
|
||||
spi-cpha;
|
||||
spi-max-frequency = <50000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wdt {
|
||||
status = "okay";
|
||||
};
|
|
@ -32,6 +32,7 @@ CONFIG_SPL_BOOTROM_SUPPORT=y
|
|||
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
|
||||
CONFIG_TPL_SYS_MALLOC_SIMPLE=y
|
||||
CONFIG_SPL_STACK_R=y
|
||||
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
|
||||
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200
|
||||
CONFIG_SPL_ATF=y
|
||||
CONFIG_TPL=y
|
||||
|
@ -44,6 +45,7 @@ CONFIG_CMD_MTDPARTS=y
|
|||
CONFIG_SPL_OF_CONTROL=y
|
||||
CONFIG_TPL_OF_CONTROL=y
|
||||
CONFIG_OF_LIVE=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="rk3368-lion-haikou"
|
||||
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent"
|
||||
CONFIG_TPL_OF_PLATDATA=y
|
||||
CONFIG_ENV_IS_IN_MMC=y
|
||||
|
|
Loading…
Reference in New Issue