mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-06-09 23:36:03 +09:00
ARM: dts: stih410-b2260: Sync DT with kernel v5.2
Synchronize U-boot DT with kernel v5.2 for stih410-b2260. Update stih410-b2260-u-boot.dtsi accordingly. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
This commit is contained in:
Patrice Chotard
parent
2e01fcf17c
commit
0203050e57
|
|
@ -1,38 +1,29 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/*
|
||||
* Copyright (C) 2014 STMicroelectronics R&D Limited
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
#include <dt-bindings/clock/stih407-clks.h>
|
||||
/ {
|
||||
/*
|
||||
* Fixed 30MHz oscillator inputs to SoC
|
||||
*/
|
||||
clk_sysin: clk-sysin {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <30000000>;
|
||||
};
|
||||
|
||||
clk_tmdsout_hdmi: clk-tmdsout-hdmi {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
||||
clocks {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
/*
|
||||
* Fixed 30MHz oscillator inputs to SoC
|
||||
*/
|
||||
clk_sysin: clk-sysin {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <30000000>;
|
||||
};
|
||||
|
||||
/*
|
||||
* ARM Peripheral clock for timers
|
||||
*/
|
||||
arm_periph_clk: clk-m-a9-periphs {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
|
||||
clocks = <&clk_m_a9>;
|
||||
clock-div = <2>;
|
||||
clock-mult = <1>;
|
||||
};
|
||||
|
||||
/*
|
||||
* A9 PLL.
|
||||
*/
|
||||
|
|
@ -62,35 +53,22 @@
|
|||
<&clockgen_a9_pll 0>,
|
||||
<&clk_s_c0_flexgen 13>,
|
||||
<&clk_m_a9_ext2f_div2>;
|
||||
|
||||
|
||||
/*
|
||||
* ARM Peripheral clock for timers
|
||||
*/
|
||||
arm_periph_clk: clk-m-a9-periphs {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
|
||||
clocks = <&clk_m_a9>;
|
||||
clock-div = <2>;
|
||||
clock-mult = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* ARM Peripheral clock for timers
|
||||
*/
|
||||
clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
|
||||
clocks = <&clk_s_c0_flexgen 13>;
|
||||
|
||||
clock-output-names = "clk-m-a9-ext2f-div2";
|
||||
|
||||
clock-div = <2>;
|
||||
clock-mult = <1>;
|
||||
};
|
||||
|
||||
/*
|
||||
* Bootloader initialized system infrastructure clock for
|
||||
* serial devices.
|
||||
*/
|
||||
clk_ext2f_a9: clockgen-c0@13 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <200000000>;
|
||||
clock-output-names = "clk-s-icn-reg-0";
|
||||
};
|
||||
|
||||
clockgen-a@090ff000 {
|
||||
clockgen-a@90ff000 {
|
||||
compatible = "st,clkgen-c32";
|
||||
reg = <0x90ff000 0x1000>;
|
||||
|
||||
|
|
@ -101,6 +79,7 @@
|
|||
clocks = <&clk_sysin>;
|
||||
|
||||
clock-output-names = "clk-s-a0-pll-ofd-0";
|
||||
clock-critical = <0>; /* clk-s-a0-pll-ofd-0 */
|
||||
};
|
||||
|
||||
clk_s_a0_flexgen: clk-s-a0-flexgen {
|
||||
|
|
@ -112,6 +91,7 @@
|
|||
<&clk_sysin>;
|
||||
|
||||
clock-output-names = "clk-ic-lmi0";
|
||||
clock-critical = <CLK_IC_LMI0>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -126,9 +106,10 @@
|
|||
"clk-s-c0-fs0-ch1",
|
||||
"clk-s-c0-fs0-ch2",
|
||||
"clk-s-c0-fs0-ch3";
|
||||
clock-critical = <0>; /* clk-s-c0-fs0-ch0 */
|
||||
};
|
||||
|
||||
clk_s_c0: clockgen-c@09103000 {
|
||||
clk_s_c0: clockgen-c@9103000 {
|
||||
compatible = "st,clkgen-c32";
|
||||
reg = <0x9103000 0x1000>;
|
||||
|
||||
|
|
@ -139,6 +120,7 @@
|
|||
clocks = <&clk_sysin>;
|
||||
|
||||
clock-output-names = "clk-s-c0-pll0-odf-0";
|
||||
clock-critical = <0>; /* clk-s-c0-pll0-odf-0 */
|
||||
};
|
||||
|
||||
clk_s_c0_pll1: clk-s-c0-pll1 {
|
||||
|
|
@ -194,6 +176,27 @@
|
|||
"clk-main-disp",
|
||||
"clk-aux-disp",
|
||||
"clk-compo-dvp";
|
||||
clock-critical = <CLK_PROC_STFE>,
|
||||
<CLK_ICN_CPU>,
|
||||
<CLK_TX_ICN_DMU>,
|
||||
<CLK_EXT2F_A9>,
|
||||
<CLK_ICN_LMI>,
|
||||
<CLK_ICN_SBC>;
|
||||
|
||||
/*
|
||||
* ARM Peripheral clock for timers
|
||||
*/
|
||||
clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
|
||||
clocks = <&clk_s_c0_flexgen 13>;
|
||||
|
||||
clock-output-names = "clk-m-a9-ext2f-div2";
|
||||
|
||||
clock-div = <2>;
|
||||
clock-mult = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -210,7 +213,7 @@
|
|||
"clk-s-d0-fs0-ch3";
|
||||
};
|
||||
|
||||
clockgen-d0@09104000 {
|
||||
clockgen-d0@9104000 {
|
||||
compatible = "st,clkgen-c32";
|
||||
reg = <0x9104000 0x1000>;
|
||||
|
||||
|
|
@ -244,13 +247,7 @@
|
|||
"clk-s-d2-fs0-ch3";
|
||||
};
|
||||
|
||||
clk_tmdsout_hdmi: clk-tmdsout-hdmi {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
||||
clockgen-d2@x9106000 {
|
||||
clockgen-d2@9106000 {
|
||||
compatible = "st,clkgen-c32";
|
||||
reg = <0x9106000 0x1000>;
|
||||
|
||||
|
|
|
|||
|
|
@ -1,10 +1,7 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/*
|
||||
* Copyright (C) 2014 STMicroelectronics Limited.
|
||||
* Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* publishhed by the Free Software Foundation.
|
||||
*/
|
||||
#include "stih407-pinctrl.dtsi"
|
||||
#include <dt-bindings/mfd/st-lpc.h>
|
||||
|
|
@ -20,7 +17,13 @@
|
|||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
dmu_reserved: rproc@44000000 {
|
||||
gp0_reserved: rproc@45000000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x45000000 0x00400000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
delta_reserved: rproc@44000000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x44000000 0x01000000>;
|
||||
no-map;
|
||||
|
|
@ -47,6 +50,7 @@
|
|||
clocks = <&clk_m_a9>;
|
||||
clock-names = "cpu";
|
||||
clock-latency = <100000>;
|
||||
cpu0-supply = <&pwm_regulator>;
|
||||
st,syscfg = <&syscfg_core 0x8e0>;
|
||||
};
|
||||
cpu@1 {
|
||||
|
|
@ -65,19 +69,19 @@
|
|||
};
|
||||
};
|
||||
|
||||
intc: interrupt-controller@08761000 {
|
||||
intc: interrupt-controller@8761000 {
|
||||
compatible = "arm,cortex-a9-gic";
|
||||
#interrupt-cells = <3>;
|
||||
interrupt-controller;
|
||||
reg = <0x08761000 0x1000>, <0x08760100 0x100>;
|
||||
};
|
||||
|
||||
scu@08760000 {
|
||||
scu@8760000 {
|
||||
compatible = "arm,cortex-a9-scu";
|
||||
reg = <0x08760000 0x1000>;
|
||||
};
|
||||
|
||||
timer@08760200 {
|
||||
timer@8760200 {
|
||||
interrupt-parent = <&intc>;
|
||||
compatible = "arm,cortex-a9-global-timer";
|
||||
reg = <0x08760200 0x100>;
|
||||
|
|
@ -85,7 +89,7 @@
|
|||
clocks = <&arm_periph_clk>;
|
||||
};
|
||||
|
||||
l2: cache-controller {
|
||||
l2: cache-controller@8762000 {
|
||||
compatible = "arm,pl310-cache";
|
||||
reg = <0x08762000 0x1000>;
|
||||
arm,data-latency = <3 3 3>;
|
||||
|
|
@ -118,24 +122,28 @@
|
|||
ranges;
|
||||
compatible = "simple-bus";
|
||||
|
||||
restart {
|
||||
restart: restart-controller@0 {
|
||||
compatible = "st,stih407-restart";
|
||||
reg = <0 0>;
|
||||
st,syscfg = <&syscfg_sbc_reg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
powerdown: powerdown-controller {
|
||||
powerdown: powerdown-controller@0 {
|
||||
compatible = "st,stih407-powerdown";
|
||||
reg = <0 0>;
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
softreset: softreset-controller {
|
||||
softreset: softreset-controller@0 {
|
||||
compatible = "st,stih407-softreset";
|
||||
reg = <0 0>;
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
picophyreset: picophyreset-controller {
|
||||
picophyreset: picophyreset-controller@0 {
|
||||
compatible = "st,stih407-picophyreset";
|
||||
reg = <0 0>;
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
|
|
@ -167,6 +175,13 @@
|
|||
syscfg_core: core-syscfg@92b0000 {
|
||||
compatible = "st,stih407-core-syscfg", "syscon";
|
||||
reg = <0x92b0000 0x1000>;
|
||||
|
||||
sti_sasg_codec: sti-sasg-codec {
|
||||
compatible = "st,stih407-sas-codec";
|
||||
#sound-dai-cells = <1>;
|
||||
status = "disabled";
|
||||
st,syscfg = <&syscfg_core>;
|
||||
};
|
||||
};
|
||||
|
||||
syscfg_lpm: lpm-syscfg@94b5100 {
|
||||
|
|
@ -174,8 +189,9 @@
|
|||
reg = <0x94b5100 0x1000>;
|
||||
};
|
||||
|
||||
irq-syscfg {
|
||||
irq-syscfg@0 {
|
||||
compatible = "st,stih407-irq-syscfg";
|
||||
reg = <0 0>;
|
||||
st,syscfg = <&syscfg_core>;
|
||||
st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
|
||||
<ST_IRQ_SYSCFG_PMU_1>;
|
||||
|
|
@ -187,22 +203,21 @@
|
|||
vtg_main: sti-vtg-main@8d02800 {
|
||||
compatible = "st,vtg";
|
||||
reg = <0x8d02800 0x200>;
|
||||
interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
|
||||
vtg_aux: sti-vtg-aux@8d00200 {
|
||||
compatible = "st,vtg";
|
||||
reg = <0x8d00200 0x100>;
|
||||
interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
|
||||
serial@9830000 {
|
||||
compatible = "st,asc";
|
||||
reg = <0x9830000 0x2c>;
|
||||
interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_serial0>;
|
||||
interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
||||
/* Pinctrl moved out to a per-board configuration */
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -210,7 +225,7 @@
|
|||
serial@9831000 {
|
||||
compatible = "st,asc";
|
||||
reg = <0x9831000 0x2c>;
|
||||
interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_serial1>;
|
||||
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
||||
|
|
@ -221,7 +236,7 @@
|
|||
serial@9832000 {
|
||||
compatible = "st,asc";
|
||||
reg = <0x9832000 0x2c>;
|
||||
interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_serial2>;
|
||||
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
||||
|
|
@ -233,7 +248,7 @@
|
|||
sbc_serial0: serial@9530000 {
|
||||
compatible = "st,asc";
|
||||
reg = <0x9530000 0x2c>;
|
||||
interrupts = <GIC_SPI 138 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_sbc_serial0>;
|
||||
clocks = <&clk_sysin>;
|
||||
|
|
@ -244,7 +259,7 @@
|
|||
serial@9531000 {
|
||||
compatible = "st,asc";
|
||||
reg = <0x9531000 0x2c>;
|
||||
interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_sbc_serial1>;
|
||||
clocks = <&clk_sysin>;
|
||||
|
|
@ -374,8 +389,9 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
usb2_picophy0: phy1 {
|
||||
usb2_picophy0: phy1@0 {
|
||||
compatible = "st,stih407-usb2-phy";
|
||||
reg = <0 0>;
|
||||
#phy-cells = <0>;
|
||||
st,syscfg = <&syscfg_core 0x100 0xf4>;
|
||||
resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
|
||||
|
|
@ -383,12 +399,13 @@
|
|||
reset-names = "global", "port";
|
||||
};
|
||||
|
||||
miphy28lp_phy: miphy28lp@9b22000 {
|
||||
miphy28lp_phy: miphy28lp@0 {
|
||||
compatible = "st,miphy28lp-phy";
|
||||
st,syscfg = <&syscfg_core>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
reg = <0 0>;
|
||||
|
||||
phy_port0: port@9b22000 {
|
||||
reg = <0x9b22000 0xff>,
|
||||
|
|
@ -458,6 +475,8 @@
|
|||
clock-names = "ssc";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_spi1_default>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -470,6 +489,8 @@
|
|||
clock-names = "ssc";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_spi2_default>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -482,6 +503,8 @@
|
|||
clock-names = "ssc";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_spi3_default>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -494,6 +517,8 @@
|
|||
clock-names = "ssc";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_spi4_default>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -507,6 +532,8 @@
|
|||
clock-names = "ssc";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_spi10_default>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -519,6 +546,8 @@
|
|||
clock-names = "ssc";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_spi11_default>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -531,16 +560,18 @@
|
|||
clock-names = "ssc";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_spi12_default>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mmc0: sdhci@09060000 {
|
||||
mmc0: sdhci@9060000 {
|
||||
compatible = "st,sdhci-stih407", "st,sdhci";
|
||||
status = "disabled";
|
||||
reg = <0x09060000 0x7ff>, <0x9061008 0x20>;
|
||||
reg-names = "mmc", "top-mmc-delay";
|
||||
interrupts = <GIC_SPI 92 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "mmcirq";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_mmc0>;
|
||||
|
|
@ -550,12 +581,12 @@
|
|||
bus-width = <8>;
|
||||
};
|
||||
|
||||
mmc1: sdhci@09080000 {
|
||||
mmc1: sdhci@9080000 {
|
||||
compatible = "st,sdhci-stih407", "st,sdhci";
|
||||
status = "disabled";
|
||||
reg = <0x09080000 0x7ff>;
|
||||
reg-names = "mmc";
|
||||
interrupts = <GIC_SPI 90 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "mmcirq";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_sd1>;
|
||||
|
|
@ -563,7 +594,6 @@
|
|||
clocks = <&clk_s_c0_flexgen CLK_MMC_1>,
|
||||
<&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
|
||||
resets = <&softreset STIH407_MMC1_SOFTRESET>;
|
||||
reset-names = "softreset";
|
||||
bus-width = <4>;
|
||||
};
|
||||
|
||||
|
|
@ -590,7 +620,7 @@
|
|||
compatible = "st,ahci";
|
||||
reg = <0x9b20000 0x1000>;
|
||||
|
||||
interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "hostc";
|
||||
|
||||
phys = <&phy_port0 PHY_TYPE_SATA>;
|
||||
|
|
@ -613,7 +643,7 @@
|
|||
compatible = "st,ahci";
|
||||
reg = <0x9b28000 0x1000>;
|
||||
|
||||
interrupts = <GIC_SPI 170 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "hostc";
|
||||
|
||||
phys = <&phy_port1 PHY_TYPE_SATA>;
|
||||
|
|
@ -654,11 +684,12 @@
|
|||
dwc3: dwc3@9900000 {
|
||||
compatible = "snps,dwc3";
|
||||
reg = <0x09900000 0x100000>;
|
||||
interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>;
|
||||
dr_mode = "peripheral";
|
||||
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
|
||||
dr_mode = "host";
|
||||
phy-names = "usb2-phy", "usb3-phy";
|
||||
phys = <&usb2_picophy0>,
|
||||
<&phy_port2 PHY_TYPE_USB3>;
|
||||
snps,dis_u3_susphy_quirk;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -667,7 +698,7 @@
|
|||
compatible = "st,sti-pwm";
|
||||
#pwm-cells = <2>;
|
||||
reg = <0x9810000 0x68>;
|
||||
interrupts = <GIC_SPI 128 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm0_chan0_default>;
|
||||
clock-names = "pwm";
|
||||
|
|
@ -682,6 +713,7 @@
|
|||
compatible = "st,sti-pwm";
|
||||
#pwm-cells = <2>;
|
||||
reg = <0x9510000 0x68>;
|
||||
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm1_chan0_default
|
||||
&pinctrl_pwm1_chan1_default
|
||||
|
|
@ -694,14 +726,14 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
rng10: rng@08a89000 {
|
||||
rng10: rng@8a89000 {
|
||||
compatible = "st,rng";
|
||||
reg = <0x08a89000 0x1000>;
|
||||
clocks = <&clk_sysin>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
rng11: rng@08a8a000 {
|
||||
rng11: rng@8a8a000 {
|
||||
compatible = "st,rng";
|
||||
reg = <0x08a8a000 0x1000>;
|
||||
clocks = <&clk_sysin>;
|
||||
|
|
@ -720,8 +752,8 @@
|
|||
resets = <&softreset STIH407_ETH1_SOFTRESET>;
|
||||
reset-names = "stmmaceth";
|
||||
|
||||
interrupts = <GIC_SPI 98 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 99 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "macirq", "eth_wake_irq";
|
||||
|
||||
/* DMA Bus Mode */
|
||||
|
|
@ -735,26 +767,14 @@
|
|||
<&clk_s_c0_flexgen CLK_ETH_PHY>;
|
||||
};
|
||||
|
||||
cec: sti-cec@094a087c {
|
||||
compatible = "st,stih-cec";
|
||||
reg = <0x94a087c 0x64>;
|
||||
clocks = <&clk_sysin>;
|
||||
clock-names = "cec-clk";
|
||||
interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
|
||||
interrupt-names = "cec-irq";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_cec0_default>;
|
||||
resets = <&softreset STIH407_LPM_SOFTRESET>;
|
||||
};
|
||||
|
||||
rng10: rng@08a89000 {
|
||||
rng10: rng@8a89000 {
|
||||
compatible = "st,rng";
|
||||
reg = <0x08a89000 0x1000>;
|
||||
clocks = <&clk_sysin>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
rng11: rng@08a8a000 {
|
||||
rng11: rng@8a8a000 {
|
||||
compatible = "st,rng";
|
||||
reg = <0x08a8a000 0x1000>;
|
||||
clocks = <&clk_sysin>;
|
||||
|
|
@ -764,7 +784,7 @@
|
|||
mailbox0: mailbox@8f00000 {
|
||||
compatible = "st,stih407-mailbox";
|
||||
reg = <0x8f00000 0x1000>;
|
||||
interrupts = <GIC_SPI 1 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#mbox-cells = <2>;
|
||||
mbox-name = "a9";
|
||||
status = "okay";
|
||||
|
|
@ -794,9 +814,24 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
st231_delta: st231-delta@44000000 {
|
||||
st231_gp0: st231-gp0@0 {
|
||||
compatible = "st,st231-rproc";
|
||||
memory-region = <&dmu_reserved>;
|
||||
reg = <0 0>;
|
||||
memory-region = <&gp0_reserved>;
|
||||
resets = <&softreset STIH407_ST231_GP0_SOFTRESET>;
|
||||
reset-names = "sw_reset";
|
||||
clocks = <&clk_s_c0_flexgen CLK_ST231_GP_0>;
|
||||
clock-frequency = <600000000>;
|
||||
st,syscfg = <&syscfg_core 0x22c>;
|
||||
#mbox-cells = <1>;
|
||||
mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
|
||||
mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>;
|
||||
};
|
||||
|
||||
st231_delta: st231-delta@0 {
|
||||
compatible = "st,st231-rproc";
|
||||
reg = <0 0>;
|
||||
memory-region = <&delta_reserved>;
|
||||
resets = <&softreset STIH407_ST231_DMU_SOFTRESET>;
|
||||
reset-names = "sw_reset";
|
||||
clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>;
|
||||
|
|
@ -819,7 +854,7 @@
|
|||
<&clk_s_c0_flexgen CLK_EXT2F_A9>,
|
||||
<&clk_s_c0_flexgen CLK_EXT2F_A9>,
|
||||
<&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
||||
interrupts = <GIC_SPI 5 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
|
||||
dma-channels = <16>;
|
||||
#dma-cells = <3>;
|
||||
};
|
||||
|
|
@ -837,9 +872,11 @@
|
|||
<&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
|
||||
<&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
||||
|
||||
interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
||||
dma-channels = <16>;
|
||||
#dma-cells = <3>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/* fdma free running */
|
||||
|
|
@ -850,20 +887,15 @@
|
|||
<0x8e77000 0x1000>,
|
||||
<0x8e78000 0x8000>;
|
||||
reg-names = "slimcore", "dmem", "peripherals", "imem";
|
||||
interrupts = <GIC_SPI 9 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
||||
dma-channels = <16>;
|
||||
#dma-cells = <3>;
|
||||
clocks = <&clk_s_c0_flexgen CLK_FDMA>,
|
||||
<&clk_s_c0_flexgen CLK_EXT2F_A9>,
|
||||
<&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
|
||||
<&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
||||
};
|
||||
|
||||
sti_sasg_codec: sti-sasg-codec {
|
||||
compatible = "st,stih407-sas-codec";
|
||||
#sound-dai-cells = <1>;
|
||||
status = "disabled";
|
||||
st,syscfg = <&syscfg_core>;
|
||||
};
|
||||
|
||||
sti_uni_player0: sti-uni-player@8d80000 {
|
||||
|
|
@ -875,7 +907,7 @@
|
|||
assigned-clock-parents = <0>, <&clk_s_d0_quadfs 0>;
|
||||
assigned-clock-rates = <50000000>;
|
||||
reg = <0x8d80000 0x158>;
|
||||
interrupts = <GIC_SPI 84 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
|
||||
dmas = <&fdma0 2 0 1>;
|
||||
dma-names = "tx";
|
||||
|
||||
|
|
@ -891,7 +923,7 @@
|
|||
assigned-clock-parents = <0>, <&clk_s_d0_quadfs 1>;
|
||||
assigned-clock-rates = <50000000>;
|
||||
reg = <0x8d81000 0x158>;
|
||||
interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
|
||||
dmas = <&fdma0 3 0 1>;
|
||||
dma-names = "tx";
|
||||
|
||||
|
|
@ -907,7 +939,7 @@
|
|||
assigned-clock-parents = <0>, <&clk_s_d0_quadfs 2>;
|
||||
assigned-clock-rates = <50000000>;
|
||||
reg = <0x8d82000 0x158>;
|
||||
interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
|
||||
dmas = <&fdma0 4 0 1>;
|
||||
dma-names = "tx";
|
||||
|
||||
|
|
@ -923,7 +955,7 @@
|
|||
assigned-clock-parents = <0>, <&clk_s_d0_quadfs 3>;
|
||||
assigned-clock-rates = <50000000>;
|
||||
reg = <0x8d85000 0x158>;
|
||||
interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
|
||||
dmas = <&fdma0 7 0 1>;
|
||||
dma-names = "tx";
|
||||
|
||||
|
|
@ -935,7 +967,7 @@
|
|||
#sound-dai-cells = <0>;
|
||||
st,syscfg = <&syscfg_core>;
|
||||
reg = <0x8d83000 0x158>;
|
||||
interrupts = <GIC_SPI 87 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
|
||||
dmas = <&fdma0 5 0 1>;
|
||||
dma-names = "rx";
|
||||
|
||||
|
|
@ -947,32 +979,22 @@
|
|||
#sound-dai-cells = <0>;
|
||||
st,syscfg = <&syscfg_core>;
|
||||
reg = <0x8d84000 0x158>;
|
||||
interrupts = <GIC_SPI 88 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
|
||||
dmas = <&fdma0 6 0 1>;
|
||||
dma-names = "rx";
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
rc: rc@09518000 {
|
||||
compatible = "st,comms-irb";
|
||||
reg = <0x09518000 0x234>;
|
||||
interrupts = <GIC_SPI 132 IRQ_TYPE_NONE>;
|
||||
rx-mode = "infrared";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_ir
|
||||
&pinctrl_uhf
|
||||
&pinctrl_tx
|
||||
&pinctrl_tx_od>;
|
||||
clocks = <&clk_sysin>;
|
||||
resets = <&softreset STIH407_IRB_SOFTRESET>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
socinfo {
|
||||
compatible = "st,stih407-socinfo";
|
||||
st,syscfg = <&syscfg_core>;
|
||||
delta0@0 {
|
||||
compatible = "st,st-delta";
|
||||
reg = <0 0>;
|
||||
clock-names = "delta",
|
||||
"delta-st231",
|
||||
"delta-flash-promip";
|
||||
clocks = <&clk_s_c0_flexgen CLK_VID_DMU>,
|
||||
<&clk_s_c0_flexgen CLK_ST231_DMU>,
|
||||
<&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -1,10 +1,7 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/*
|
||||
* Copyright (C) 2014 STMicroelectronics Limited.
|
||||
* Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* publishhed by the Free Software Foundation.
|
||||
*/
|
||||
#include "st-pincfg.h"
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
|
@ -45,18 +42,18 @@
|
|||
};
|
||||
|
||||
soc {
|
||||
pin-controller-sbc {
|
||||
pin-controller-sbc@961f080 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "st,stih407-sbc-pinctrl";
|
||||
st,syscfg = <&syscfg_sbc>;
|
||||
reg = <0x0961f080 0x4>;
|
||||
reg-names = "irqmux";
|
||||
interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "irqmux";
|
||||
ranges = <0 0x09610000 0x6000>;
|
||||
|
||||
pio0: gpio@09610000 {
|
||||
pio0: gpio@9610000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
|
@ -64,7 +61,7 @@
|
|||
reg = <0x0 0x100>;
|
||||
st,bank-name = "PIO0";
|
||||
};
|
||||
pio1: gpio@09611000 {
|
||||
pio1: gpio@9611000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
|
@ -72,7 +69,7 @@
|
|||
reg = <0x1000 0x100>;
|
||||
st,bank-name = "PIO1";
|
||||
};
|
||||
pio2: gpio@09612000 {
|
||||
pio2: gpio@9612000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
|
@ -80,7 +77,7 @@
|
|||
reg = <0x2000 0x100>;
|
||||
st,bank-name = "PIO2";
|
||||
};
|
||||
pio3: gpio@09613000 {
|
||||
pio3: gpio@9613000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
|
@ -88,7 +85,7 @@
|
|||
reg = <0x3000 0x100>;
|
||||
st,bank-name = "PIO3";
|
||||
};
|
||||
pio4: gpio@09614000 {
|
||||
pio4: gpio@9614000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
|
@ -97,7 +94,7 @@
|
|||
st,bank-name = "PIO4";
|
||||
};
|
||||
|
||||
pio5: gpio@09615000 {
|
||||
pio5: gpio@9615000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
|
@ -369,18 +366,18 @@
|
|||
};
|
||||
};
|
||||
|
||||
pin-controller-front0 {
|
||||
pin-controller-front0@920f080 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "st,stih407-front-pinctrl";
|
||||
st,syscfg = <&syscfg_front>;
|
||||
reg = <0x0920f080 0x4>;
|
||||
reg-names = "irqmux";
|
||||
interrupts = <GIC_SPI 189 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "irqmux";
|
||||
ranges = <0 0x09200000 0x10000>;
|
||||
|
||||
pio10: pio@09200000 {
|
||||
pio10: pio@9200000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
|
@ -388,7 +385,7 @@
|
|||
reg = <0x0 0x100>;
|
||||
st,bank-name = "PIO10";
|
||||
};
|
||||
pio11: pio@09201000 {
|
||||
pio11: pio@9201000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
|
@ -396,7 +393,7 @@
|
|||
reg = <0x1000 0x100>;
|
||||
st,bank-name = "PIO11";
|
||||
};
|
||||
pio12: pio@09202000 {
|
||||
pio12: pio@9202000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
|
@ -404,7 +401,7 @@
|
|||
reg = <0x2000 0x100>;
|
||||
st,bank-name = "PIO12";
|
||||
};
|
||||
pio13: pio@09203000 {
|
||||
pio13: pio@9203000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
|
@ -412,7 +409,7 @@
|
|||
reg = <0x3000 0x100>;
|
||||
st,bank-name = "PIO13";
|
||||
};
|
||||
pio14: pio@09204000 {
|
||||
pio14: pio@9204000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
|
@ -420,7 +417,7 @@
|
|||
reg = <0x4000 0x100>;
|
||||
st,bank-name = "PIO14";
|
||||
};
|
||||
pio15: pio@09205000 {
|
||||
pio15: pio@9205000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
|
@ -428,7 +425,7 @@
|
|||
reg = <0x5000 0x100>;
|
||||
st,bank-name = "PIO15";
|
||||
};
|
||||
pio16: pio@09206000 {
|
||||
pio16: pio@9206000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
|
@ -436,7 +433,7 @@
|
|||
reg = <0x6000 0x100>;
|
||||
st,bank-name = "PIO16";
|
||||
};
|
||||
pio17: pio@09207000 {
|
||||
pio17: pio@9207000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
|
@ -444,7 +441,7 @@
|
|||
reg = <0x7000 0x100>;
|
||||
st,bank-name = "PIO17";
|
||||
};
|
||||
pio18: pio@09208000 {
|
||||
pio18: pio@9208000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
|
@ -452,7 +449,7 @@
|
|||
reg = <0x8000 0x100>;
|
||||
st,bank-name = "PIO18";
|
||||
};
|
||||
pio19: pio@09209000 {
|
||||
pio19: pio@9209000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
|
@ -465,19 +462,16 @@
|
|||
serial0 {
|
||||
pinctrl_serial0: serial0-0 {
|
||||
st,pins {
|
||||
tx = <&pio17 0 ALT1 OUT>;
|
||||
rx = <&pio17 1 ALT1 IN>;
|
||||
tx = <&pio17 0 ALT1 OUT>;
|
||||
rx = <&pio17 1 ALT1 IN>;
|
||||
};
|
||||
};
|
||||
pinctrl_serial0_rts: serial0_rts {
|
||||
st,pins {
|
||||
rts = <&pio17 3 ALT1 OUT>;
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl_serial0_cts: serial0_cts {
|
||||
pinctrl_serial0_hw_flowctrl: serial0-0_hw_flowctrl {
|
||||
st,pins {
|
||||
tx = <&pio17 0 ALT1 OUT>;
|
||||
rx = <&pio17 1 ALT1 IN>;
|
||||
cts = <&pio17 2 ALT1 IN>;
|
||||
rts = <&pio17 3 ALT1 OUT>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -932,18 +926,18 @@
|
|||
};
|
||||
};
|
||||
|
||||
pin-controller-front1 {
|
||||
pin-controller-front1@921f080 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "st,stih407-front-pinctrl";
|
||||
st,syscfg = <&syscfg_front>;
|
||||
reg = <0x0921f080 0x4>;
|
||||
reg-names = "irqmux";
|
||||
interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "irqmux";
|
||||
ranges = <0 0x09210000 0x10000>;
|
||||
|
||||
pio20: pio@09210000 {
|
||||
pio20: pio@9210000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
|
@ -965,18 +959,18 @@
|
|||
};
|
||||
};
|
||||
|
||||
pin-controller-rear {
|
||||
pin-controller-rear@922f080 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "st,stih407-rear-pinctrl";
|
||||
st,syscfg = <&syscfg_rear>;
|
||||
reg = <0x0922f080 0x4>;
|
||||
reg-names = "irqmux";
|
||||
interrupts = <GIC_SPI 191 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "irqmux";
|
||||
ranges = <0 0x09220000 0x6000>;
|
||||
|
||||
pio30: gpio@09220000 {
|
||||
pio30: gpio@9220000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
|
@ -984,7 +978,7 @@
|
|||
reg = <0x0 0x100>;
|
||||
st,bank-name = "PIO30";
|
||||
};
|
||||
pio31: gpio@09221000 {
|
||||
pio31: gpio@9221000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
|
@ -992,7 +986,7 @@
|
|||
reg = <0x1000 0x100>;
|
||||
st,bank-name = "PIO31";
|
||||
};
|
||||
pio32: gpio@09222000 {
|
||||
pio32: gpio@9222000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
|
@ -1000,7 +994,7 @@
|
|||
reg = <0x2000 0x100>;
|
||||
st,bank-name = "PIO32";
|
||||
};
|
||||
pio33: gpio@09223000 {
|
||||
pio33: gpio@9223000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
|
@ -1008,7 +1002,7 @@
|
|||
reg = <0x3000 0x100>;
|
||||
st,bank-name = "PIO33";
|
||||
};
|
||||
pio34: gpio@09224000 {
|
||||
pio34: gpio@9224000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
|
@ -1016,7 +1010,7 @@
|
|||
reg = <0x4000 0x100>;
|
||||
st,bank-name = "PIO34";
|
||||
};
|
||||
pio35: gpio@09225000 {
|
||||
pio35: gpio@9225000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
|
@ -1026,41 +1020,6 @@
|
|||
st,retime-pin-mask = <0x7f>;
|
||||
};
|
||||
|
||||
dvo {
|
||||
pinctrl_dvo: dvo {
|
||||
st,pins {
|
||||
hs = <&pio30 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
|
||||
vs = <&pio30 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
|
||||
de = <&pio30 2 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
|
||||
ck = <&pio30 3 ALT2 (OE | CLKNOTDATA) 0>;
|
||||
d0 = <&pio30 4 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
|
||||
d1 = <&pio30 5 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
|
||||
d2 = <&pio30 6 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
|
||||
d3 = <&pio30 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
|
||||
d4 = <&pio31 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
|
||||
d5 = <&pio31 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
|
||||
d6 = <&pio31 2 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
|
||||
d7 = <&pio31 3 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
|
||||
d8 = <&pio31 4 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
|
||||
d9 = <&pio31 5 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
|
||||
d10 = <&pio31 6 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
|
||||
d11 = <&pio31 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
|
||||
d12 = <&pio32 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
|
||||
d13 = <&pio32 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
|
||||
d14 = <&pio32 2 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
|
||||
d15 = <&pio32 3 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
|
||||
d16 = <&pio32 4 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
|
||||
d17 = <&pio32 5 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
|
||||
d18 = <&pio32 6 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
|
||||
d19 = <&pio32 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
|
||||
d20 = <&pio33 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
|
||||
d21 = <&pio33 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
|
||||
d22 = <&pio33 2 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
|
||||
d23 = <&pio33 3 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
i2c4 {
|
||||
pinctrl_i2c4_default: i2c4-default {
|
||||
st,pins {
|
||||
|
|
@ -1195,18 +1154,18 @@
|
|||
};
|
||||
};
|
||||
|
||||
pin-controller-flash {
|
||||
pin-controller-flash@923f080 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "st,stih407-flash-pinctrl";
|
||||
st,syscfg = <&syscfg_flash>;
|
||||
reg = <0x0923f080 0x4>;
|
||||
reg-names = "irqmux";
|
||||
interrupts = <GIC_SPI 192 IRQ_TYPE_NONE>;
|
||||
interrupts-names = "irqmux";
|
||||
interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "irqmux";
|
||||
ranges = <0 0x09230000 0x3000>;
|
||||
|
||||
pio40: gpio@09230000 {
|
||||
pio40: gpio@9230000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
|
@ -1214,7 +1173,7 @@
|
|||
reg = <0 0x100>;
|
||||
st,bank-name = "PIO40";
|
||||
};
|
||||
pio41: gpio@09231000 {
|
||||
pio41: gpio@9231000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
|
@ -1222,7 +1181,7 @@
|
|||
reg = <0x1000 0x100>;
|
||||
st,bank-name = "PIO41";
|
||||
};
|
||||
pio42: gpio@09232000 {
|
||||
pio42: gpio@9232000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
|
|
|||
|
|
@ -9,8 +9,25 @@
|
|||
soc {
|
||||
st_dwc3: dwc3@8f94000 {
|
||||
dwc3: dwc3@9900000 {
|
||||
dr_mode = "peripheral";
|
||||
phys = <&usb2_picophy0>;
|
||||
};
|
||||
};
|
||||
|
||||
ohci0: usb@9a03c00 {
|
||||
compatible = "generic-ohci";
|
||||
};
|
||||
|
||||
ehci0: usb@9a03e00 {
|
||||
compatible = "generic-ehci";
|
||||
};
|
||||
|
||||
ohci1: usb@9a83c00 {
|
||||
compatible = "generic-ohci";
|
||||
};
|
||||
|
||||
ehci1: usb@9a83e00 {
|
||||
compatible = "generic-ehci";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -1,10 +1,7 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/*
|
||||
* Copyright (C) 2016 STMicroelectronics (R&D) Limited.
|
||||
* Author: Patrice Chotard <patrice.chotard@st.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
/dts-v1/;
|
||||
#include "stih410.dtsi"
|
||||
|
|
@ -15,68 +12,79 @@
|
|||
compatible = "st,stih410-b2260", "st,stih410";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyAS1,115200";
|
||||
linux,stdout-path = &uart1;
|
||||
bootargs = "clk_ignore_unused";
|
||||
stdout-path = &uart1;
|
||||
};
|
||||
|
||||
memory {
|
||||
memory@40000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x40000000 0x40000000>;
|
||||
};
|
||||
|
||||
aliases {
|
||||
ttyAS1 = &uart1;
|
||||
serial1 = &uart1;
|
||||
ethernet0 = ðernet0;
|
||||
};
|
||||
|
||||
soc {
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
user_green_1 {
|
||||
label = "User_green_1";
|
||||
gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
user_green_2 {
|
||||
label = "User_green_2";
|
||||
gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
user_green_3 {
|
||||
label = "User_green_3";
|
||||
gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
user_green_4 {
|
||||
label = "User_green_4";
|
||||
gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
wifi_yellow {
|
||||
label = "Wifi_yellow";
|
||||
gpios = <&pio4 0 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "wifi-activity";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
bt_blue {
|
||||
label = "Bluetooth_blue";
|
||||
gpios = <&pio3 3 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "hci0-power";
|
||||
default-state = "off";
|
||||
};
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
user_green_1 {
|
||||
label = "User_green_1";
|
||||
gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
user_green_2 {
|
||||
label = "User_green_2";
|
||||
gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
user_green_3 {
|
||||
label = "User_green_3";
|
||||
gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
user_green_4 {
|
||||
label = "User_green_4";
|
||||
gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
sound: sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,name = "STI-B2260";
|
||||
status = "okay";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
simple-audio-card,dai-link@0 {
|
||||
reg = <0>;
|
||||
/* DAC */
|
||||
format = "i2s";
|
||||
mclk-fs = <128>;
|
||||
cpu {
|
||||
sound-dai = <&sti_uni_player0>;
|
||||
};
|
||||
|
||||
codec {
|
||||
sound-dai = <&sti_hdmi>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
soc {
|
||||
/* Low speed expansion connector */
|
||||
uart0: serial@9830000 {
|
||||
label = "LS-UART0";
|
||||
pinctrl-names = "default", "no-hw-flowctrl";
|
||||
pinctrl-0 = <&pinctrl_serial0_hw_flowctrl>;
|
||||
pinctrl-1 = <&pinctrl_serial0>;
|
||||
rts-gpios = <&pio17 3 GPIO_ACTIVE_LOW>;
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
@ -119,14 +127,14 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
mmc0: sdhci@09060000 {
|
||||
mmc0: sdhci@9060000 {
|
||||
pinctrl-0 = <&pinctrl_sd0>;
|
||||
bus-width = <4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* high speed expansion connector */
|
||||
mmc1: sdhci@09080000 {
|
||||
mmc1: sdhci@9080000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
@ -138,11 +146,11 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
usb2_picophy1: phy2 {
|
||||
usb2_picophy1: phy2@0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb2_picophy2: phy3 {
|
||||
usb2_picophy2: phy3@0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
@ -183,17 +191,17 @@
|
|||
sti_uni_player0: sti-uni-player@8d80000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* SSC11 to HDMI */
|
||||
hdmiddc: i2c@9541000 {
|
||||
/* HDMI V1.3a supports Standard mode only */
|
||||
clock-frequency = <100000>;
|
||||
st,i2c-min-scl-pulse-width-us = <0>;
|
||||
st,i2c-min-sda-pulse-width-us = <1>;
|
||||
st,i2c-min-sda-pulse-width-us = <5>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
miphy28lp_phy: miphy28lp@9b22000 {
|
||||
miphy28lp_phy: miphy28lp@0 {
|
||||
|
||||
phy_port1: port@9b2a000 {
|
||||
st,osc-force-ext;
|
||||
};
|
||||
|
|
@ -202,25 +210,5 @@
|
|||
sata1: sata@9b28000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,name = "STI-B2260";
|
||||
status = "okay";
|
||||
|
||||
simple-audio-card,dai-link@0 {
|
||||
/* DAC */
|
||||
format = "i2s";
|
||||
mclk-fs = <128>;
|
||||
cpu {
|
||||
sound-dai = <&sti_uni_player0>;
|
||||
};
|
||||
|
||||
codec {
|
||||
sound-dai = <&sti_hdmi>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -1,12 +1,25 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/*
|
||||
* Copyright (C) 2014 STMicroelectronics R&D Limited
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
#include <dt-bindings/clock/stih410-clks.h>
|
||||
/ {
|
||||
/*
|
||||
* Fixed 30MHz oscillator inputs to SoC
|
||||
*/
|
||||
clk_sysin: clk-sysin {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <30000000>;
|
||||
clock-output-names = "CLK_SYSIN";
|
||||
};
|
||||
|
||||
clk_tmdsout_hdmi: clk-tmdsout-hdmi {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
||||
clocks {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
|
@ -14,27 +27,6 @@
|
|||
|
||||
compatible = "st,stih410-clk", "simple-bus";
|
||||
|
||||
/*
|
||||
* Fixed 30MHz oscillator inputs to SoC
|
||||
*/
|
||||
clk_sysin: clk-sysin {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <30000000>;
|
||||
clock-output-names = "CLK_SYSIN";
|
||||
};
|
||||
|
||||
/*
|
||||
* ARM Peripheral clock for timers
|
||||
*/
|
||||
arm_periph_clk: clk-m-a9-periphs {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clocks = <&clk_m_a9>;
|
||||
clock-div = <2>;
|
||||
clock-mult = <1>;
|
||||
};
|
||||
|
||||
/*
|
||||
* A9 PLL.
|
||||
*/
|
||||
|
|
@ -64,35 +56,19 @@
|
|||
<&clockgen_a9_pll 0>,
|
||||
<&clk_s_c0_flexgen 13>,
|
||||
<&clk_m_a9_ext2f_div2>;
|
||||
/*
|
||||
* ARM Peripheral clock for timers
|
||||
*/
|
||||
arm_periph_clk: clk-m-a9-periphs {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clocks = <&clk_m_a9>;
|
||||
clock-div = <2>;
|
||||
clock-mult = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* ARM Peripheral clock for timers
|
||||
*/
|
||||
clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
|
||||
clocks = <&clk_s_c0_flexgen 13>;
|
||||
|
||||
clock-output-names = "clk-m-a9-ext2f-div2";
|
||||
|
||||
clock-div = <2>;
|
||||
clock-mult = <1>;
|
||||
};
|
||||
|
||||
/*
|
||||
* Bootloader initialized system infrastructure clock for
|
||||
* serial devices.
|
||||
*/
|
||||
clk_ext2f_a9: clockgen-c0@13 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <200000000>;
|
||||
clock-output-names = "clk-s-icn-reg-0";
|
||||
};
|
||||
|
||||
clockgen-a@090ff000 {
|
||||
clockgen-a@90ff000 {
|
||||
compatible = "st,clkgen-c32";
|
||||
reg = <0x90ff000 0x1000>;
|
||||
|
||||
|
|
@ -134,7 +110,7 @@
|
|||
clock-critical = <0>; /* clk-s-c0-fs0-ch0 */
|
||||
};
|
||||
|
||||
clk_s_c0: clockgen-c@09103000 {
|
||||
clk_s_c0: clockgen-c@9103000 {
|
||||
compatible = "st,clkgen-c32";
|
||||
reg = <0x9103000 0x1000>;
|
||||
|
||||
|
|
@ -208,11 +184,27 @@
|
|||
"clk-clust-hades",
|
||||
"clk-hwpe-hades",
|
||||
"clk-fc-hades";
|
||||
clock-critical = <CLK_ICN_CPU>,
|
||||
clock-critical = <CLK_PROC_STFE>,
|
||||
<CLK_ICN_CPU>,
|
||||
<CLK_TX_ICN_DMU>,
|
||||
<CLK_EXT2F_A9>,
|
||||
<CLK_ICN_LMI>,
|
||||
<CLK_ICN_SBC>;
|
||||
|
||||
/*
|
||||
* ARM Peripheral clock for timers
|
||||
*/
|
||||
clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
|
||||
clocks = <&clk_s_c0_flexgen 13>;
|
||||
|
||||
clock-output-names = "clk-m-a9-ext2f-div2";
|
||||
|
||||
clock-div = <2>;
|
||||
clock-mult = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -229,7 +221,7 @@
|
|||
"clk-s-d0-fs0-ch3";
|
||||
};
|
||||
|
||||
clockgen-d0@09104000 {
|
||||
clockgen-d0@9104000 {
|
||||
compatible = "st,clkgen-c32";
|
||||
reg = <0x9104000 0x1000>;
|
||||
|
||||
|
|
@ -265,13 +257,7 @@
|
|||
"clk-s-d2-fs0-ch3";
|
||||
};
|
||||
|
||||
clk_tmdsout_hdmi: clk-tmdsout-hdmi {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
||||
clockgen-d2@x9106000 {
|
||||
clockgen-d2@9106000 {
|
||||
compatible = "st,clkgen-c32";
|
||||
reg = <0x9106000 0x1000>;
|
||||
|
||||
|
|
|
|||
|
|
@ -1,16 +1,13 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/*
|
||||
* Copyright (C) 2014 STMicroelectronics Limited.
|
||||
* Author: Peter Griffin <peter.griffin@linaro.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* publishhed by the Free Software Foundation.
|
||||
*/
|
||||
#include "st-pincfg.h"
|
||||
/ {
|
||||
|
||||
soc {
|
||||
pin-controller-rear {
|
||||
pin-controller-rear@922f080 {
|
||||
|
||||
usb0 {
|
||||
pinctrl_usb0: usb2-0 {
|
||||
|
|
|
|||
|
|
@ -1,67 +1,21 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/*
|
||||
* Copyright (C) 2014 STMicroelectronics Limited.
|
||||
* Author: Peter Griffin <peter.griffin@linaro.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* publishhed by the Free Software Foundation.
|
||||
*/
|
||||
#include "stih410-clock.dtsi"
|
||||
#include "stih407-family.dtsi"
|
||||
#include "stih410-pinctrl.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
/ {
|
||||
aliases {
|
||||
bdisp0 = &bdisp0;
|
||||
};
|
||||
|
||||
cpus {
|
||||
cpu@0 {
|
||||
st,syscfg = <&syscfg_core 0x8e0>;
|
||||
st,syscfg-eng = <&syscfg_opp 0x4 0x0>;
|
||||
clocks = <&clk_m_a9>;
|
||||
operating-points-v2 = <&cpu0_opp_table>;
|
||||
};
|
||||
cpu@1 {
|
||||
clocks = <&clk_m_a9>;
|
||||
operating-points-v2 = <&cpu0_opp_table>;
|
||||
};
|
||||
};
|
||||
|
||||
cpu0_opp_table: opp_table0 {
|
||||
compatible = "operating-points-v2";
|
||||
opp-shared;
|
||||
|
||||
opp@1500000000 {
|
||||
opp-supported-hw = <0xffffffff 0xffffffff 0xffffffff>;
|
||||
opp-hz = /bits/ 64 <1500000000>;
|
||||
clock-latency-ns = <10000000>;
|
||||
opp-suspend;
|
||||
};
|
||||
opp@1200000000 {
|
||||
opp-supported-hw = <0xffffffff 0xffffffff 0xffffffff>;
|
||||
opp-hz = /bits/ 64 <1200000000>;
|
||||
clock-latency-ns = <10000000>;
|
||||
};
|
||||
opp@800000000 {
|
||||
opp-supported-hw = <0xffffffff 0xffffffff 0xffffffff>;
|
||||
opp-hz = /bits/ 64 <800000000>;
|
||||
clock-latency-ns = <10000000>;
|
||||
};
|
||||
opp@400000000 {
|
||||
opp-supported-hw = <0xffffffff 0xffffffff 0xffffffff>;
|
||||
opp-hz = /bits/ 64 <400000000>;
|
||||
clock-latency-ns = <10000000>;
|
||||
};
|
||||
};
|
||||
|
||||
soc {
|
||||
syscfg_opp: @08a6583c {
|
||||
compatible = "syscon";
|
||||
reg = <0x08a6583c 0x8>;
|
||||
};
|
||||
|
||||
usb2_picophy1: phy2 {
|
||||
usb2_picophy1: phy2@0 {
|
||||
compatible = "st,stih407-usb2-phy";
|
||||
reg = <0 0>;
|
||||
#phy-cells = <0>;
|
||||
st,syscfg = <&syscfg_core 0xf8 0xf4>;
|
||||
resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
|
||||
|
|
@ -71,8 +25,9 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
usb2_picophy2: phy3 {
|
||||
usb2_picophy2: phy3@0 {
|
||||
compatible = "st,stih407-usb2-phy";
|
||||
reg = <0 0>;
|
||||
#phy-cells = <0>;
|
||||
st,syscfg = <&syscfg_core 0xfc 0xf4>;
|
||||
resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
|
||||
|
|
@ -83,15 +38,14 @@
|
|||
};
|
||||
|
||||
ohci0: usb@9a03c00 {
|
||||
compatible = "generic-ohci";
|
||||
compatible = "st,st-ohci-300x";
|
||||
reg = <0x9a03c00 0x100>;
|
||||
interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
|
||||
<&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
|
||||
resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
|
||||
<&softreset STIH407_USB2_PORT0_SOFTRESET>;
|
||||
reset-names = "power", "softreset";
|
||||
|
||||
phys = <&usb2_picophy1>;
|
||||
phy-names = "usb";
|
||||
|
||||
|
|
@ -99,9 +53,9 @@
|
|||
};
|
||||
|
||||
ehci0: usb@9a03e00 {
|
||||
compatible = "generic-ehci";
|
||||
compatible = "st,st-ehci-300x";
|
||||
reg = <0x9a03e00 0x100>;
|
||||
interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usb0>;
|
||||
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
|
||||
|
|
@ -116,15 +70,14 @@
|
|||
};
|
||||
|
||||
ohci1: usb@9a83c00 {
|
||||
compatible = "generic-ohci";
|
||||
compatible = "st,st-ohci-300x";
|
||||
reg = <0x9a83c00 0x100>;
|
||||
interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
|
||||
<&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
|
||||
resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
|
||||
<&softreset STIH407_USB2_PORT1_SOFTRESET>;
|
||||
reset-names = "power", "softreset";
|
||||
|
||||
phys = <&usb2_picophy2>;
|
||||
phy-names = "usb";
|
||||
|
||||
|
|
@ -132,9 +85,9 @@
|
|||
};
|
||||
|
||||
ehci1: usb@9a83e00 {
|
||||
compatible = "generic-ehci";
|
||||
compatible = "st,st-ehci-300x";
|
||||
reg = <0x9a83e00 0x100>;
|
||||
interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usb1>;
|
||||
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
|
||||
|
|
@ -142,18 +95,18 @@
|
|||
resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
|
||||
<&softreset STIH407_USB2_PORT1_SOFTRESET>;
|
||||
reset-names = "power", "softreset";
|
||||
|
||||
phys = <&usb2_picophy2>;
|
||||
phy-names = "usb";
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sti-display-subsystem {
|
||||
sti-display-subsystem@0 {
|
||||
compatible = "st,sti-display-subsystem";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
reg = <0 0>;
|
||||
assigned-clocks = <&clk_s_d2_quadfs 0>,
|
||||
<&clk_s_d2_quadfs 1>,
|
||||
<&clk_s_c0_pll1 0>,
|
||||
|
|
@ -243,10 +196,10 @@
|
|||
|
||||
sti_hdmi: sti-hdmi@8d04000 {
|
||||
compatible = "st,stih407-hdmi";
|
||||
#sound-dai-cells = <0>;
|
||||
reg = <0x8d04000 0x1000>;
|
||||
reg-names = "hdmi-reg";
|
||||
interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>;
|
||||
#sound-dai-cells = <0>;
|
||||
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "irq";
|
||||
clock-names = "pix",
|
||||
"tmds",
|
||||
|
|
@ -262,7 +215,7 @@
|
|||
<&clk_s_d2_quadfs 0>,
|
||||
<&clk_s_d2_quadfs 1>;
|
||||
|
||||
hdmi,hpd-gpio = <&pio5 3>;
|
||||
hdmi,hpd-gpio = <&pio5 3 GPIO_ACTIVE_LOW>;
|
||||
reset-names = "hdmi";
|
||||
resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
|
||||
ddc = <&hdmiddc>;
|
||||
|
|
@ -283,24 +236,7 @@
|
|||
<&clk_s_d2_quadfs 1>;
|
||||
};
|
||||
|
||||
sti-dvo@8d00400 {
|
||||
compatible = "st,stih407-dvo";
|
||||
status = "disabled";
|
||||
reg = <0x8d00400 0x200>;
|
||||
reg-names = "dvo-reg";
|
||||
clock-names = "dvo_pix",
|
||||
"dvo",
|
||||
"main_parent",
|
||||
"aux_parent";
|
||||
clocks = <&clk_s_d2_flexgen CLK_PIX_DVO>,
|
||||
<&clk_s_d2_flexgen CLK_DVO>,
|
||||
<&clk_s_d2_quadfs 0>,
|
||||
<&clk_s_d2_quadfs 1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_dvo>;
|
||||
};
|
||||
|
||||
sti-hqvdp@9c000000 {
|
||||
sti-hqvdp@9c00000 {
|
||||
compatible = "st,stih407-hqvdp";
|
||||
reg = <0x9C00000 0x100000>;
|
||||
clock-names = "hqvdp", "pix_main";
|
||||
|
|
@ -315,7 +251,7 @@
|
|||
bdisp0:bdisp@9f10000 {
|
||||
compatible = "st,stih407-bdisp";
|
||||
reg = <0x9f10000 0x1000>;
|
||||
interrupts = <GIC_SPI 38 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-names = "bdisp";
|
||||
clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>;
|
||||
};
|
||||
|
|
@ -324,8 +260,8 @@
|
|||
compatible = "st,st-hva";
|
||||
reg = <0x8c85000 0x400>, <0x6000000 0x40000>;
|
||||
reg-names = "hva_registers", "hva_esram";
|
||||
interrupts = <GIC_SPI 58 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 59 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-names = "clk_hva";
|
||||
clocks = <&clk_s_c0_flexgen CLK_HVA>;
|
||||
};
|
||||
|
|
@ -338,66 +274,7 @@
|
|||
interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
|
||||
};
|
||||
|
||||
g1@8c80000 {
|
||||
compatible = "st,g1";
|
||||
reg = <0x8c80000 0x194>;
|
||||
interrupts = <GIC_SPI 57 IRQ_TYPE_NONE>;
|
||||
};
|
||||
|
||||
temp0{
|
||||
compatible = "st,stih407-thermal";
|
||||
reg = <0x91a0000 0x28>;
|
||||
clock-names = "thermal";
|
||||
clocks = <&clk_sysin>;
|
||||
interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
|
||||
};
|
||||
|
||||
delta0 {
|
||||
compatible = "st,delta";
|
||||
clock-names = "delta", "delta-st231", "delta-flash-promip";
|
||||
clocks = <&clk_s_c0_flexgen CLK_VID_DMU>,
|
||||
<&clk_s_c0_flexgen CLK_ST231_DMU>,
|
||||
<&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
|
||||
};
|
||||
|
||||
h264pp0: h264pp@8c00000 {
|
||||
compatible = "st,h264pp";
|
||||
reg = <0x8c00000 0x20000>;
|
||||
interrupts = <GIC_SPI 53 IRQ_TYPE_NONE>;
|
||||
clock-names = "clk_h264pp_0";
|
||||
clocks = <&clk_s_c0_flexgen CLK_PP_DMU>;
|
||||
};
|
||||
|
||||
mali: mali@09f00000 {
|
||||
compatible = "arm,mali-400";
|
||||
reg = <0x09f00000 0x10000>;
|
||||
interrupts = <GIC_SPI 49 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 50 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 41 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 45 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 42 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 46 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 43 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 47 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 44 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 48 IRQ_TYPE_NONE>;
|
||||
interrupt-names = "IRQGP",
|
||||
"IRQGPMMU",
|
||||
"IRQPP0",
|
||||
"IRQPPMMU0",
|
||||
"IRQPP1",
|
||||
"IRQPPMMU1",
|
||||
"IRQPP2",
|
||||
"IRQPPMMU2",
|
||||
"IRQPP3",
|
||||
"IRQPPMMU3";
|
||||
clock-names = "gpu-clk";
|
||||
clocks = <&clk_s_c0_flexgen CLK_ICN_GPU>;
|
||||
reset-names = "gpu";
|
||||
resets = <&softreset STIH407_GPU_SOFTRESET>;
|
||||
};
|
||||
|
||||
delta0 {
|
||||
delta0@0 {
|
||||
compatible = "st,st-delta";
|
||||
clock-names = "delta",
|
||||
"delta-st231",
|
||||
|
|
@ -407,51 +284,17 @@
|
|||
<&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
|
||||
};
|
||||
|
||||
h264pp0: h264pp@8c00000 {
|
||||
compatible = "st,h264pp";
|
||||
reg = <0x8c00000 0x20000>;
|
||||
interrupts = <GIC_SPI 53 IRQ_TYPE_NONE>;
|
||||
clock-names = "clk_h264pp_0";
|
||||
clocks = <&clk_s_c0_flexgen CLK_PP_DMU>;
|
||||
};
|
||||
|
||||
mali: mali@09f00000 {
|
||||
compatible = "arm,mali-400";
|
||||
reg = <0x09f00000 0x10000>;
|
||||
interrupts = <GIC_SPI 49 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 50 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 41 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 45 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 42 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 46 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 43 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 47 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 44 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 48 IRQ_TYPE_NONE>;
|
||||
interrupt-names = "IRQGP",
|
||||
"IRQGPMMU",
|
||||
"IRQPP0",
|
||||
"IRQPPMMU0",
|
||||
"IRQPP1",
|
||||
"IRQPPMMU1",
|
||||
"IRQPP2",
|
||||
"IRQPPMMU2",
|
||||
"IRQPP3",
|
||||
"IRQPPMMU3";
|
||||
clock-names = "gpu-clk";
|
||||
clocks = <&clk_s_c0_flexgen CLK_ICN_GPU>;
|
||||
reset-names = "gpu";
|
||||
resets = <&softreset STIH407_GPU_SOFTRESET>;
|
||||
};
|
||||
|
||||
hva@8c85000{
|
||||
compatible = "st,st-hva";
|
||||
reg = <0x8c85000 0x400>, <0x6000000 0x40000>;
|
||||
reg-names = "hva_registers", "hva_esram";
|
||||
interrupts = <GIC_SPI 58 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 59 IRQ_TYPE_NONE>;
|
||||
clock-names = "clk_hva";
|
||||
clocks = <&clk_s_c0_flexgen CLK_HVA>;
|
||||
sti-cec@94a087c {
|
||||
compatible = "st,stih-cec";
|
||||
reg = <0x94a087c 0x64>;
|
||||
clocks = <&clk_sysin>;
|
||||
clock-names = "cec-clk";
|
||||
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "cec-irq";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_cec0_default>;
|
||||
resets = <&softreset STIH407_LPM_SOFTRESET>;
|
||||
hdmi-phandle = <&sti_hdmi>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user