brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-06-09 23:36:03 +09:00
Code Issues Projects Releases Wiki Activity

ARM: dts: sync amlogic G12A/G12B/SM1 DT from Linux 5.8-rc1

Browse Source 
This imports the changes and the new Odroid-C4 board from the Linux
commit b3a9e3b9622a ("Linux 5.8-rc1").

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
This commit is contained in:
Christian Hewitt 2020-04-24 02:58:30 +00:00 committed by Neil Armstrong
parent 6de936b011
commit da77a787ff
10 changed files with 501 additions and 36 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
arch/arm/dts/Makefile
View File

@ -161,6 +161,7 @@ dtb-$(CONFIG_ARCH_MESON) += \
meson-g12b-odroid-n2.dtb \
meson-g12b-a311d-khadas-vim3.dtb \
meson-sm1-khadas-vim3l.dtb \
meson-sm1-odroid-c4.dtb \
meson-sm1-sei610.dtb
dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
tegra20-medcom-wide.dtb \

13
arch/arm/dts/meson-g12-common.dtsi
View File

@ -250,6 +250,17 @@
};
};
acodec: audio-controller@32000 {
compatible = "amlogic,t9015";
reg = <0x0 0x32000 0x0 0x14>;
#sound-dai-cells = <0>;
sound-name-prefix = "ACODEC";
clocks = <&clkc CLKID_AUDIO_CODEC>;
clock-names = "pclk";
resets = <&reset RESET_AUDIO_CODEC>;
status = "disabled";
};
periphs: bus@34400 {
compatible = "simple-bus";
reg = <0x0 0x34400 0x0 0x400>;
@ -2319,7 +2330,7 @@
reg = <0x0 0xff400000 0x0 0x40000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
clock-names = "ddr";
clock-names = "otg";
phys = <&usb2_phy1>;
phy-names = "usb2-phy";
dr_mode = "peripheral";

32
arch/arm/dts/meson-g12.dtsi
View File

@ -343,6 +343,15 @@
status = "disabled";
};
toacodec: audio-controller@740 {
compatible = "amlogic,g12a-toacodec";
reg = <0x0 0x740 0x0 0x4>;
#sound-dai-cells = <1>;
sound-name-prefix = "TOACODEC";
resets = <&clkc_audio AUD_RESET_TOACODEC>;
status = "disabled";
};
tohdmitx: audio-controller@744 {
compatible = "amlogic,g12a-tohdmitx";
reg = <0x0 0x744 0x0 0x4>;
@ -354,29 +363,6 @@
};
};
&cpu_thermal {
cooling-maps {
map0 {
trip = <&cpu_passive>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu_hot>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
&ethmac {
power-domains = <&pwrc PWRC_G12A_ETH_ID>;
};

22
arch/arm/dts/meson-g12b-khadas-vim3.dtsi
View File

@ -51,11 +51,11 @@
sound {
compatible = "amlogic,axg-sound-card";
model = "G12B-KHADAS-VIM3";
audio-aux-devs = <&tdmout_b>;
audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
"TDM_B Playback", "TDMOUT_B OUT";
audio-aux-devs = <&tdmout_a>;
audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
"TDMOUT_A IN 1", "FRDDR_B OUT 0",
"TDMOUT_A IN 2", "FRDDR_C OUT 0",
"TDM_A Playback", "TDMOUT_A OUT";
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
@ -80,7 +80,7 @@
/* 8ch hdmi interface */
dai-link-3 {
sound-dai = <&tdmif_b>;
sound-dai = <&tdmif_a>;
dai-format = "i2s";
dai-tdm-slot-tx-mask-0 = <1 1>;
dai-tdm-slot-tx-mask-1 = <1 1>;
@ -89,7 +89,7 @@
mclk-fs = <256>;
codec {
sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
};
};
@ -154,6 +154,10 @@
clock-latency = <50000>;
};
&frddr_a {
status = "okay";
};
&frddr_b {
status = "okay";
};
@ -178,11 +182,11 @@
status = "okay";
};
&tdmif_b {
&tdmif_a {
status = "okay";
};
&tdmout_b {
&tdmout_a {
status = "okay";
};

15
arch/arm/dts/meson-g12b-s922x.dtsi
View File

@ -65,6 +65,11 @@
opp-hz = /bits/ 64 <1896000000>;
opp-microvolt = <981000>;
};
opp-1992000000 {
opp-hz = /bits/ 64 <1992000000>;
opp-microvolt = <1001000>;
};
};
cpub_opp_table_1: opp-table-1 {
@ -120,5 +125,15 @@
opp-hz = /bits/ 64 <1704000000>;
opp-microvolt = <891000>;
};
opp-1800000000 {
opp-hz = /bits/ 64 <1800000000>;
opp-microvolt = <981000>;
};
opp-1908000000 {
opp-hz = /bits/ 64 <1908000000>;
opp-microvolt = <1022000>;
};
};
};

22
arch/arm/dts/meson-g12b.dtsi
View File

@ -113,3 +113,25 @@
compatible = "amlogic,g12b-clkc";
};
&cpu_thermal {
cooling-maps {
map0 {
trip = <&cpu_passive>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu_hot>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};

4
arch/arm/dts/meson-khadas-vim3.dtsi
View File

@ -39,13 +39,13 @@
leds {
compatible = "gpio-leds";
white {
led-white {
label = "vim3:white:sys";
gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
red {
led-red {
label = "vim3:red";
gpios = <&gpio_expander 5 GPIO_ACTIVE_LOW>;
};

402
arch/arm/dts/meson-sm1-odroid-c4.dts Normal file
View File

@ -0,0 +1,402 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2020 Dongjin Kim <tobetter@gmail.com>
*/
/dts-v1/;
#include "meson-sm1.dtsi"
#include <dt-bindings/gpio/meson-g12a-gpio.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "hardkernel,odroid-c4", "amlogic,sm1";
model = "Hardkernel ODROID-C4";
aliases {
serial0 = &uart_AO;
ethernet0 = &ethmac;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x40000000>;
};
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
};
leds {
compatible = "gpio-leds";
led-blue {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
panic-indicator;
};
};
tflash_vdd: regulator-tflash_vdd {
compatible = "regulator-fixed";
regulator-name = "TFLASH_VDD";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
tf_io: gpio-regulator-tf_io {
compatible = "regulator-gpio";
regulator-name = "TF_IO";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
gpios = <&gpio_ao GPIOAO_6 GPIO_ACTIVE_HIGH>;
gpios-states = <0>;
states = <3300000 0>,
<1800000 1>;
};
flash_1v8: regulator-flash_1v8 {
compatible = "regulator-fixed";
regulator-name = "FLASH_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vcc_3v3>;
regulator-always-on;
};
main_12v: regulator-main_12v {
compatible = "regulator-fixed";
regulator-name = "12V";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
regulator-always-on;
};
vcc_5v: regulator-vcc_5v {
compatible = "regulator-fixed";
regulator-name = "5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
vin-supply = <&main_12v>;
};
vcc_1v8: regulator-vcc_1v8 {
compatible = "regulator-fixed";
regulator-name = "VCC_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vcc_3v3>;
regulator-always-on;
};
vcc_3v3: regulator-vcc_3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vddao_3v3>;
regulator-always-on;
/* FIXME: actually controlled by VDDCPU_B_EN */
};
vddcpu: regulator-vddcpu {
/*
* MP8756GD Regulator.
*/
compatible = "pwm-regulator";
regulator-name = "VDDCPU";
regulator-min-microvolt = <721000>;
regulator-max-microvolt = <1022000>;
vin-supply = <&main_12v>;
pwms = <&pwm_AO_cd 1 1250 0>;
pwm-dutycycle-range = <100 0>;
regulator-boot-on;
regulator-always-on;
};
hub_5v: regulator-hub_5v {
compatible = "regulator-fixed";
regulator-name = "HUB_5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc_5v>;
/* Connected to the Hub CHIPENABLE, LOW sets low power state */
gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
usb_pwr_en: regulator-usb_pwr_en {
compatible = "regulator-fixed";
regulator-name = "USB_PWR_EN";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc_5v>;
/* Connected to the microUSB port power enable */
gpio = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vddao_1v8: regulator-vddao_1v8 {
compatible = "regulator-fixed";
regulator-name = "VDDAO_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vddao_3v3>;
regulator-always-on;
};
vddao_3v3: regulator-vddao_3v3 {
compatible = "regulator-fixed";
regulator-name = "VDDAO_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&main_12v>;
regulator-always-on;
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&hdmi_tx_tmds_out>;
};
};
};
};
&cpu0 {
cpu-supply = <&vddcpu>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPU_CLK>;
clock-latency = <50000>;
};
&cpu1 {
cpu-supply = <&vddcpu>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPU1_CLK>;
clock-latency = <50000>;
};
&cpu2 {
cpu-supply = <&vddcpu>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPU2_CLK>;
clock-latency = <50000>;
};
&cpu3 {
cpu-supply = <&vddcpu>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPU3_CLK>;
clock-latency = <50000>;
};
&ext_mdio {
external_phy: ethernet-phy@0 {
/* Realtek RTL8211F (0x001cc916) */
reg = <0>;
max-speed = <1000>;
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_14 */
interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
};
};
&ethmac {
pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
pinctrl-names = "default";
status = "okay";
phy-mode = "rgmii";
phy-handle = <&external_phy>;
amlogic,tx-delay-ns = <2>;
};
&gpio {
gpio-line-names =
/* GPIOZ */
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
/* GPIOH */
"", "", "", "", "",
"PIN_36", /* GPIOH_5 */
"PIN_26", /* GPIOH_6 */
"PIN_32", /* GPIOH_7 */
"",
/* BOOT */
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
/* GPIOC */
"", "", "", "", "", "", "", "",
/* GPIOA */
"", "", "", "", "", "", "", "",
"", "", "", "", "", "",
"PIN_27", /* GPIOA_14 */
"PIN_28", /* GPIOA_15 */
/* GPIOX */
"PIN_16", /* GPIOX_0 */
"PIN_18", /* GPIOX_1 */
"PIN_22", /* GPIOX_2 */
"PIN_11", /* GPIOX_3 */
"PIN_13", /* GPIOX_4 */
"PIN_7", /* GPIOX_5 */
"PIN_33", /* GPIOX_6 */
"PIN_15", /* GPIOX_7 */
"PIN_19", /* GPIOX_8 */
"PIN_21", /* GPIOX_9 */
"PIN_24", /* GPIOX_10 */
"PIN_23", /* GPIOX_11 */
"PIN_8", /* GPIOX_12 */
"PIN_10", /* GPIOX_13 */
"PIN_29", /* GPIOX_14 */
"PIN_31", /* GPIOX_15 */
"PIN_12", /* GPIOX_16 */
"PIN_3", /* GPIOX_17 */
"PIN_5", /* GPIOX_18 */
"PIN_35"; /* GPIOX_19 */
/*
* WARNING: The USB Hub on the Odroid-C4 needs a reset signal
* to be turned high in order to be detected by the USB Controller
* This signal should be handled by a USB specific power sequence
* in order to reset the Hub when USB bus is powered down.
*/
usb-hub {
gpio-hog;
gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "usb-hub-reset";
};
};
&gpio_ao {
gpio-line-names =
/* GPIOAO */
"", "", "", "",
"PIN_47", /* GPIOAO_4 */
"", "",
"PIN_45", /* GPIOAO_7 */
"PIN_46", /* GPIOAO_8 */
"PIN_44", /* GPIOAO_9 */
"PIN_42", /* GPIOAO_10 */
"",
/* GPIOE */
"", "", "";
};
&hdmi_tx {
status = "okay";
pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
pinctrl-names = "default";
hdmi-supply = <&vcc_5v>;
};
&hdmi_tx_tmds_port {
hdmi_tx_tmds_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
linux,rc-map-name = "rc-odroid";
};
&pwm_AO_cd {
pinctrl-0 = <&pwm_ao_d_e_pins>;
pinctrl-names = "default";
clocks = <&xtal>;
clock-names = "clkin1";
status = "okay";
};
&saradc {
status = "okay";
};
/* SD card */
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_c_pins>;
pinctrl-1 = <&sdcard_clk_gate_c_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <200000000>;
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
sd-uhs-sdr104;
disable-wp;
cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&tflash_vdd>;
vqmmc-supply = <&tf_io>;
};
/* eMMC */
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-mmc-highspeed;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
max-frequency = <200000000>;
disable-wp;
mmc-pwrseq = <&emmc_pwrseq>;
vmmc-supply = <&vcc_3v3>;
vqmmc-supply = <&flash_1v8>;
};
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
&usb {
status = "okay";
vbus-supply = <&usb_pwr_en>;
};
&usb2_phy0 {
phy-supply = <&vcc_5v>;
};
&usb2_phy1 {
/* Enable the hub which is connected to this port */
phy-supply = <&hub_5v>;
};

2
arch/arm/dts/meson-sm1-sei610.dts
View File

@ -104,7 +104,7 @@
leds {
compatible = "gpio-leds";
bluetooth {
led-bluetooth {
label = "sei610:blue:bt";
gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
default-state = "off";

24
arch/arm/dts/meson-sm1.dtsi
View File

@ -56,6 +56,7 @@
reg = <0x0 0x0>;
enable-method = "psci";
next-level-cache = <&l2>;
#cooling-cells = <2>;
};
cpu1: cpu@1 {
@ -64,6 +65,7 @@
reg = <0x0 0x1>;
enable-method = "psci";
next-level-cache = <&l2>;
#cooling-cells = <2>;
};
cpu2: cpu@2 {
@ -72,6 +74,7 @@
reg = <0x0 0x2>;
enable-method = "psci";
next-level-cache = <&l2>;
#cooling-cells = <2>;
};
cpu3: cpu@3 {
@ -80,6 +83,7 @@
reg = <0x0 0x3>;
enable-method = "psci";
next-level-cache = <&l2>;
#cooling-cells = <2>;
};
l2: l2-cache0 {
@ -466,6 +470,26 @@
compatible = "amlogic,sm1-clkc";
};
&cpu_thermal {
cooling-maps {
map0 {
trip = <&cpu_passive>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu_hot>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
&ethmac {
power-domains = <&pwrc PWRC_SM1_ETH_ID>;
};