bcm968360bg: add initial support
This add the initial support of the broadcom reference board bcm968360bg with a bcm68360 SoC. This board has 512 MB of RAM, 256 MB of flash (nand), 2 USB port, 1 UART, and 4 ethernet ports. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
This commit is contained in:
Philippe Reynes
Tom Rini
parent
e520036f9d
commit
645b7ec52c
|
|
@ -1834,6 +1834,7 @@ source "board/armltd/vexpress64/Kconfig"
|
|||
source "board/broadcom/bcm23550_w1d/Kconfig"
|
||||
source "board/broadcom/bcm28155_ap/Kconfig"
|
||||
source "board/broadcom/bcm963158/Kconfig"
|
||||
source "board/broadcom/bcm968360bg/Kconfig"
|
||||
source "board/broadcom/bcm968580xref/Kconfig"
|
||||
source "board/broadcom/bcmcygnus/Kconfig"
|
||||
source "board/broadcom/bcmnsp/Kconfig"
|
||||
|
|
|
|||
|
|
@ -859,6 +859,9 @@ dtb-$(CONFIG_ARCH_BCM283X) += \
|
|||
dtb-$(CONFIG_ARCH_BCM63158) += \
|
||||
bcm963158.dtb
|
||||
|
||||
dtb-$(CONFIG_ARCH_BCM68360) += \
|
||||
bcm968360bg.dtb
|
||||
|
||||
dtb-$(CONFIG_ARCH_BCM6858) += \
|
||||
bcm968580xref.dtb
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,168 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* Copyright (C) 2020 Philippe Reynes <philippe.reynes@softathome.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "bcm68360.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Broadcom bcm68360bg";
|
||||
compatible = "broadcom,bcm68360bg", "brcm,bcm68360";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x20000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
u-boot,dm-pre-reloc;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio4 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio6 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio7 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&nand {
|
||||
status = "okay";
|
||||
write-protect = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
nandcs@0 {
|
||||
compatible = "brcm,nandcs";
|
||||
reg = <0>;
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
brcm,nand-oob-sector-size = <16>;
|
||||
};
|
||||
};
|
||||
|
||||
&leds {
|
||||
status = "okay";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
brcm,serial-led-en-pol;
|
||||
brcm,serial-led-data-ppol;
|
||||
|
||||
led@0 {
|
||||
reg = <0>;
|
||||
label = "red:alarm";
|
||||
};
|
||||
|
||||
led@1 {
|
||||
reg = <1>;
|
||||
label = "green:wan";
|
||||
};
|
||||
|
||||
led@2 {
|
||||
reg = <2>;
|
||||
label = "green:wps";
|
||||
};
|
||||
|
||||
led@12 {
|
||||
reg = <12>;
|
||||
label = "orange:enet5.1";
|
||||
};
|
||||
|
||||
led@13 {
|
||||
reg = <13>;
|
||||
label = "green:enet5.2";
|
||||
};
|
||||
|
||||
led@14 {
|
||||
reg = <14>;
|
||||
label = "orange:enet5.2";
|
||||
};
|
||||
|
||||
led@15 {
|
||||
reg = <15>;
|
||||
label = "green:enet5.1";
|
||||
};
|
||||
|
||||
led@16 {
|
||||
reg = <16>;
|
||||
label = "green:usb1";
|
||||
};
|
||||
|
||||
led@17 {
|
||||
reg = <17>;
|
||||
label = "green:voip1";
|
||||
};
|
||||
|
||||
led@18 {
|
||||
reg = <18>;
|
||||
label = "green:voip2";
|
||||
};
|
||||
|
||||
led@19 {
|
||||
reg = <19>;
|
||||
label = "green:enet6";
|
||||
};
|
||||
|
||||
led@20 {
|
||||
reg = <20>;
|
||||
label = "orange:enet6";
|
||||
};
|
||||
|
||||
led@21 {
|
||||
reg = <21>;
|
||||
label = "green:inet";
|
||||
};
|
||||
|
||||
led@22 {
|
||||
reg = <22>;
|
||||
label = "green:usb2";
|
||||
};
|
||||
};
|
||||
|
||||
&hsspi {
|
||||
status = "okay";
|
||||
|
||||
flash: mt25@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,17 @@
|
|||
if ARCH_BCM68360
|
||||
|
||||
config SYS_VENDOR
|
||||
default "broadcom"
|
||||
|
||||
config SYS_BOARD
|
||||
default "bcm968360bg"
|
||||
|
||||
config SYS_CONFIG_NAME
|
||||
default "broadcom_bcm968360bg"
|
||||
|
||||
endif
|
||||
|
||||
config TARGET_BCM968360BG
|
||||
bool "Support Broadcom bcm968360bg"
|
||||
depends on ARCH_BCM68360
|
||||
select ARM64
|
||||
|
|
@ -0,0 +1,6 @@
|
|||
BCM968360BG BOARD
|
||||
M: Philippe Reynes <philippe.reynes@softathome.com>
|
||||
S: Maintained
|
||||
F: board/broadcom/bcm968360bg
|
||||
F: include/configs/broadcom_bcm968360bg.h
|
||||
F: configs/bcm968360bg_ram_defconfig
|
||||
|
|
@ -0,0 +1,3 @@
|
|||
# SPDX-License-Identifier: GPL-2.0+
|
||||
|
||||
obj-y += bcm968360bg.o
|
||||
|
|
@ -0,0 +1,61 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* Copyright (C) 2020 Philippe Reynes <philippe.reynes@softathome.com>
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <fdtdec.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
#ifdef CONFIG_ARM64
|
||||
#include <asm/armv8/mmu.h>
|
||||
|
||||
static struct mm_region broadcom_bcm968360bg_mem_map[] = {
|
||||
{
|
||||
/* RAM */
|
||||
.virt = 0x00000000UL,
|
||||
.phys = 0x00000000UL,
|
||||
.size = 8UL * SZ_1G,
|
||||
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
|
||||
PTE_BLOCK_INNER_SHARE
|
||||
}, {
|
||||
/* SoC */
|
||||
.virt = 0x80000000UL,
|
||||
.phys = 0x80000000UL,
|
||||
.size = 0xff80000000UL,
|
||||
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
|
||||
PTE_BLOCK_NON_SHARE |
|
||||
PTE_BLOCK_PXN | PTE_BLOCK_UXN
|
||||
}, {
|
||||
/* List terminator */
|
||||
0,
|
||||
}
|
||||
};
|
||||
|
||||
struct mm_region *mem_map = broadcom_bcm968360bg_mem_map;
|
||||
#endif
|
||||
|
||||
int board_init(void)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
int dram_init(void)
|
||||
{
|
||||
if (fdtdec_setup_mem_size_base() != 0)
|
||||
printf("fdtdec_setup_mem_size_base() has failed\n");
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int dram_init_banksize(void)
|
||||
{
|
||||
fdtdec_setup_memory_banksize();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int print_cpuinfo(void)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -0,0 +1,53 @@
|
|||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_BCM68360=y
|
||||
CONFIG_SYS_TEXT_BASE=0x10000000
|
||||
CONFIG_SYS_MALLOC_F_LEN=0x8000
|
||||
CONFIG_ENV_SIZE=0x2000
|
||||
CONFIG_NR_DRAM_BANKS=1
|
||||
CONFIG_TARGET_BCM968360BG=y
|
||||
CONFIG_ENV_VARS_UBOOT_CONFIG=y
|
||||
CONFIG_FIT=y
|
||||
CONFIG_FIT_SIGNATURE=y
|
||||
CONFIG_FIT_VERBOSE=y
|
||||
CONFIG_LEGACY_IMAGE_FORMAT=y
|
||||
CONFIG_SUPPORT_RAW_INITRD=y
|
||||
CONFIG_DISPLAY_BOARDINFO_LATE=y
|
||||
CONFIG_HUSH_PARSER=y
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_MTD=y
|
||||
CONFIG_CMD_NAND=y
|
||||
CONFIG_CMD_PART=y
|
||||
CONFIG_CMD_SPI=y
|
||||
CONFIG_DOS_PARTITION=y
|
||||
CONFIG_ISO_PARTITION=y
|
||||
CONFIG_EFI_PARTITION=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="bcm968360bg"
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
# CONFIG_NET is not set
|
||||
CONFIG_BLK=y
|
||||
CONFIG_CLK=y
|
||||
CONFIG_DM_GPIO=y
|
||||
CONFIG_BCM6345_GPIO=y
|
||||
CONFIG_LED=y
|
||||
CONFIG_LED_BCM6858=y
|
||||
CONFIG_LED_BLINK=y
|
||||
# CONFIG_MMC is not set
|
||||
CONFIG_MTD=y
|
||||
CONFIG_DM_MTD=y
|
||||
CONFIG_MTD_RAW_NAND=y
|
||||
CONFIG_NAND_BRCMNAND=y
|
||||
CONFIG_NAND_BRCMNAND_68360=y
|
||||
CONFIG_DM_SPI_FLASH=y
|
||||
CONFIG_SPI_FLASH_SFDP_SUPPORT=y
|
||||
CONFIG_SPI_FLASH_MACRONIX=y
|
||||
CONFIG_SPECIFY_CONSOLE_INDEX=y
|
||||
CONFIG_CONS_INDEX=0
|
||||
CONFIG_DM_SERIAL=y
|
||||
CONFIG_SERIAL_SEARCH_ALL=y
|
||||
CONFIG_BCM6345_SERIAL=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_DM_SPI=y
|
||||
CONFIG_BCM63XX_HSSPI=y
|
||||
CONFIG_SYSRESET=y
|
||||
CONFIG_SYSRESET_WATCHDOG=y
|
||||
CONFIG_WDT_BCM6345=y
|
||||
|
|
@ -0,0 +1,40 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0+ */
|
||||
/*
|
||||
* Copyright (C) 2020 Philippe Reynes <philippe.reynes@softathome.com>
|
||||
*/
|
||||
|
||||
#include <linux/sizes.h>
|
||||
|
||||
/*
|
||||
* common
|
||||
*/
|
||||
|
||||
/* UART */
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \
|
||||
230400, 500000, 1500000 }
|
||||
/* Memory usage */
|
||||
#define CONFIG_SYS_MAXARGS 24
|
||||
#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)
|
||||
|
||||
/*
|
||||
* 6858
|
||||
*/
|
||||
|
||||
/* RAM */
|
||||
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
||||
|
||||
/* U-Boot */
|
||||
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_16M)
|
||||
#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE
|
||||
|
||||
#define CONFIG_SKIP_LOWLEVEL_INIT
|
||||
|
||||
#ifdef CONFIG_MTD_RAW_NAND
|
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||||
#define CONFIG_SYS_NAND_SELF_INIT
|
||||
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
||||
#endif /* CONFIG_MTD_RAW_NAND */
|
||||
|
||||
/*
|
||||
* 968360bg
|
||||
*/
|
||||
Loading…
Reference in New Issue