arm64: dts: rockchip: Add ROCKPi 4A/4B support

Rock PI 4 has 3 variants of hardware platforms called
RockPI 4A, 4B, and 4C.

- Rock PI 4A has no Wif/BT.
- Rock PI 4B has AP6256 Wifi/BT, PoE.
- Rock PI 4C has AP6256 Wifi/BT, PoE, miniDP, USB Host enable
  GPIO pin change compared to 4B, 4C

So move common nodes, properties into dtsi file and include
on respective variant dts files.

Use 4B dts into default rock-pi-4 defconfig until we find any
solution for dynamic detection of these variants.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This commit is contained in:
Jagan Teki 2020-07-21 00:25:48 +05:30 committed by Kever Yang
parent fad823f45e
commit 8d7192cb7f
6 changed files with 65 additions and 29 deletions

View File

@ -136,7 +136,8 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
rk3399-puma-haikou.dtb \
rk3399-roc-pc.dtb \
rk3399-roc-pc-mezzanine.dtb \
rk3399-rock-pi-4.dtb \
rk3399-rock-pi-4a.dtb \
rk3399-rock-pi-4b.dtb \
rk3399-rock960.dtb \
rk3399-rockpro64.dtb \
rk3399pro-rock-pi-n10.dtb

View File

@ -11,9 +11,6 @@
#include "rk3399-opp.dtsi"
/ {
model = "Radxa ROCK Pi 4";
compatible = "radxa,rockpi4", "rockchip,rk3399";
chosen {
stdout-path = "serial2:1500000n8";
};
@ -587,17 +584,6 @@
pinctrl-names = "default";
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
sd-uhs-sdr104;
status = "okay";
brcmf: wifi@1 {
compatible = "brcm,bcm4329-fmac";
reg = <1>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
interrupt-names = "host-wake";
pinctrl-names = "default";
pinctrl-0 = <&wifi_host_wake_l>;
};
};
&sdmmc {
@ -666,18 +652,6 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
status = "okay";
bluetooth {
compatible = "brcm,bcm43438-bt";
clocks = <&rk808 1>;
clock-names = "ext_clock";
device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
};
};
&uart2 {

View File

@ -0,0 +1,13 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
* Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
*/
/dts-v1/;
#include "rk3399-rock-pi-4.dtsi"
/ {
model = "Radxa ROCK Pi 4A";
compatible = "radxa,rockpi4", "rockchip,rk3399";
};

View File

@ -0,0 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
*/
#include "rk3399-rock-pi-4-u-boot.dtsi"

View File

@ -0,0 +1,42 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
* Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
*/
/dts-v1/;
#include "rk3399-rock-pi-4.dtsi"
/ {
model = "Radxa ROCK Pi 4B";
compatible = "radxa,rockpi4", "rockchip,rk3399";
};
&sdio0 {
status = "okay";
brcmf: wifi@1 {
compatible = "brcm,bcm4329-fmac";
reg = <1>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
interrupt-names = "host-wake";
pinctrl-names = "default";
pinctrl-0 = <&wifi_host_wake_l>;
};
};
&uart0 {
status = "okay";
bluetooth {
compatible = "brcm,bcm43438-bt";
clocks = <&rk808 1>;
clock-names = "ext_clock";
device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
};
};

View File

@ -9,7 +9,7 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock-pi-4.dtb"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock-pi-4b.dtb"
CONFIG_MISC_INIT_R=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
@ -24,7 +24,7 @@ CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TIME=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="rk3399-rock-pi-4"
CONFIG_DEFAULT_DEVICE_TREE="rk3399-rock-pi-4b"
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y