ARM: dts: stm32mp1: DT alignment with Linux 5.6-rc1
This commit manages diversity for STM32M15x SOCs with: - dedicated files to support all STM32MP15 SOCs family. The differences between those SOCs are: -STM32MP151 [1]: common file. -STM32MP153 [2]: STM32MP151 + CANs + a second CortexA7-CPU. -STM32MP157 [3]: STM32MP153 + DSI + GPU. - new files to manage security diversity on STM32MP15x SOCs. On STM32MP15xY, "Y" gives information: -Y = A means no cryp IP and no secure boot. -Y = C means cryp IP + secure boot. - stm32mp157 pinctrl files to better manage package diversity. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com>
This commit is contained in:
Patrick Delaunay
parent
0c90e0cf63
commit
1a4f57c895
File diff suppressed because it is too large
Load Diff
|
|
@ -20,12 +20,6 @@
|
|||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
cpu1: cpu@1 {
|
||||
compatible = "arm,cortex-a7";
|
||||
device_type = "cpu";
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
psci {
|
||||
|
|
@ -155,6 +149,11 @@
|
|||
reg = <1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
counter {
|
||||
compatible = "st,stm32-timer-counter";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
timers3: timer@40001000 {
|
||||
|
|
@ -184,6 +183,11 @@
|
|||
reg = <2>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
counter {
|
||||
compatible = "st,stm32-timer-counter";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
timers4: timer@40002000 {
|
||||
|
|
@ -211,6 +215,11 @@
|
|||
reg = <3>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
counter {
|
||||
compatible = "st,stm32-timer-counter";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
timers5: timer@40003000 {
|
||||
|
|
@ -240,6 +249,11 @@
|
|||
reg = <4>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
counter {
|
||||
compatible = "st,stm32-timer-counter";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
timers6: timer@40004000 {
|
||||
|
|
@ -596,6 +610,11 @@
|
|||
reg = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
counter {
|
||||
compatible = "st,stm32-timer-counter";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
timers8: timer@44001000 {
|
||||
|
|
@ -627,6 +646,11 @@
|
|||
reg = <7>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
counter {
|
||||
compatible = "st,stm32-timer-counter";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
usart6: serial@44003000 {
|
||||
|
|
@ -930,33 +954,7 @@
|
|||
};
|
||||
};
|
||||
|
||||
m_can1: can@4400e000 {
|
||||
compatible = "bosch,m_can";
|
||||
reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
|
||||
reg-names = "m_can", "message_ram";
|
||||
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "int0", "int1";
|
||||
clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
|
||||
clock-names = "hclk", "cclk";
|
||||
bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
m_can2: can@4400f000 {
|
||||
compatible = "bosch,m_can";
|
||||
reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
|
||||
reg-names = "m_can", "message_ram";
|
||||
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "int0", "int1";
|
||||
clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
|
||||
clock-names = "hclk", "cclk";
|
||||
bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
dma1: dma@48000000 {
|
||||
dma1: dma-controller@48000000 {
|
||||
compatible = "st,stm32-dma";
|
||||
reg = <0x48000000 0x400>;
|
||||
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
|
||||
|
|
@ -973,7 +971,7 @@
|
|||
dma-requests = <8>;
|
||||
};
|
||||
|
||||
dma2: dma@48001000 {
|
||||
dma2: dma-controller@48001000 {
|
||||
compatible = "st,stm32-dma";
|
||||
reg = <0x48001000 0x400>;
|
||||
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
|
||||
|
|
@ -1041,8 +1039,8 @@
|
|||
compatible = "arm,pl18x", "arm,primecell";
|
||||
arm,primecell-periphid = <0x10153180>;
|
||||
reg = <0x48004000 0x400>;
|
||||
reg-names = "sdmmc";
|
||||
interrupts = <GIC_SPI 137 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "cmd_irq";
|
||||
clocks = <&rcc SDMMC3_K>;
|
||||
clock-names = "apb_pclk";
|
||||
resets = <&rcc SDMMC3_R>;
|
||||
|
|
@ -1273,15 +1271,6 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
cryp1: cryp@54001000 {
|
||||
compatible = "st,stm32mp1-cryp";
|
||||
reg = <0x54001000 0x400>;
|
||||
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&rcc CRYP1>;
|
||||
resets = <&rcc CRYP1_R>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
hash1: hash@54002000 {
|
||||
compatible = "st,stm32f756-hash";
|
||||
reg = <0x54002000 0x400>;
|
||||
|
|
@ -1302,7 +1291,7 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
mdma1: dma@58000000 {
|
||||
mdma1: dma-controller@58000000 {
|
||||
compatible = "st,stm32h7-mdma";
|
||||
reg = <0x58000000 0x1000>;
|
||||
interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
@ -1349,20 +1338,22 @@
|
|||
arm,primecell-periphid = <0x10153180>;
|
||||
reg = <0x58005000 0x1000>;
|
||||
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "cmd_irq";
|
||||
interrupt-names = "cmd_irq";
|
||||
clocks = <&rcc SDMMC1_K>;
|
||||
clock-names = "apb_pclk";
|
||||
resets = <&rcc SDMMC1_R>;
|
||||
cap-sd-highspeed;
|
||||
cap-mmc-highspeed;
|
||||
max-frequency = <120000000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdmmc2: sdmmc@58007000 {
|
||||
compatible = "arm,pl18x", "arm,primecell";
|
||||
arm,primecell-periphid = <0x10153180>;
|
||||
reg = <0x58007000 0x1000>;
|
||||
interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "cmd_irq";
|
||||
clocks = <&rcc SDMMC2_K>;
|
||||
clock-names = "apb_pclk";
|
||||
resets = <&rcc SDMMC2_R>;
|
||||
|
|
@ -1406,6 +1397,7 @@
|
|||
st,syscon = <&syscfg 0x4>;
|
||||
snps,mixed-burst;
|
||||
snps,pbl = <2>;
|
||||
snps,en-tx-lpi-clockgating;
|
||||
snps,axi-config = <&stmmac_axi_config_0>;
|
||||
snps,tso;
|
||||
status = "disabled";
|
||||
|
|
@ -1430,26 +1422,6 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
gpu: gpu@59000000 {
|
||||
compatible = "vivante,gc";
|
||||
reg = <0x59000000 0x800>;
|
||||
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&rcc GPU>, <&rcc GPU_K>;
|
||||
clock-names = "bus" ,"core";
|
||||
resets = <&rcc GPU_R>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
dsi: dsi@5a000000 {
|
||||
compatible = "st,stm32-dsi";
|
||||
reg = <0x5a000000 0x800>;
|
||||
clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>;
|
||||
clock-names = "pclk", "ref", "px_clk";
|
||||
resets = <&rcc DSI_R>;
|
||||
reset-names = "apb";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ltdc: display-controller@5a001000 {
|
||||
compatible = "st,stm32-ltdc";
|
||||
reg = <0x5a001000 0x400>;
|
||||
|
|
@ -1535,7 +1507,7 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
bsec: nvmem@5c005000 {
|
||||
bsec: efuse@5c005000 {
|
||||
compatible = "st,stm32mp15-bsec";
|
||||
reg = <0x5c005000 0x400>;
|
||||
#address-cells = <1>;
|
||||
|
|
@ -1560,12 +1532,172 @@
|
|||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/*
|
||||
* Break node order to solve dependency probe issue between
|
||||
* pinctrl and exti.
|
||||
*/
|
||||
pinctrl: pin-controller@50002000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "st,stm32mp157-pinctrl";
|
||||
ranges = <0 0x50002000 0xa400>;
|
||||
interrupt-parent = <&exti>;
|
||||
st,syscfg = <&exti 0x60 0xff>;
|
||||
hwlocks = <&hwspinlock 0>;
|
||||
pins-are-numbered;
|
||||
|
||||
gpioa: gpio@50002000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
reg = <0x0 0x400>;
|
||||
clocks = <&rcc GPIOA>;
|
||||
st,bank-name = "GPIOA";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpiob: gpio@50003000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
reg = <0x1000 0x400>;
|
||||
clocks = <&rcc GPIOB>;
|
||||
st,bank-name = "GPIOB";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpioc: gpio@50004000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
reg = <0x2000 0x400>;
|
||||
clocks = <&rcc GPIOC>;
|
||||
st,bank-name = "GPIOC";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpiod: gpio@50005000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
reg = <0x3000 0x400>;
|
||||
clocks = <&rcc GPIOD>;
|
||||
st,bank-name = "GPIOD";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpioe: gpio@50006000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
reg = <0x4000 0x400>;
|
||||
clocks = <&rcc GPIOE>;
|
||||
st,bank-name = "GPIOE";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpiof: gpio@50007000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
reg = <0x5000 0x400>;
|
||||
clocks = <&rcc GPIOF>;
|
||||
st,bank-name = "GPIOF";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpiog: gpio@50008000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
reg = <0x6000 0x400>;
|
||||
clocks = <&rcc GPIOG>;
|
||||
st,bank-name = "GPIOG";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpioh: gpio@50009000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
reg = <0x7000 0x400>;
|
||||
clocks = <&rcc GPIOH>;
|
||||
st,bank-name = "GPIOH";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpioi: gpio@5000a000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
reg = <0x8000 0x400>;
|
||||
clocks = <&rcc GPIOI>;
|
||||
st,bank-name = "GPIOI";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpioj: gpio@5000b000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
reg = <0x9000 0x400>;
|
||||
clocks = <&rcc GPIOJ>;
|
||||
st,bank-name = "GPIOJ";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpiok: gpio@5000c000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
reg = <0xa000 0x400>;
|
||||
clocks = <&rcc GPIOK>;
|
||||
st,bank-name = "GPIOK";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl_z: pin-controller-z@54004000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "st,stm32mp157-z-pinctrl";
|
||||
ranges = <0 0x54004000 0x400>;
|
||||
pins-are-numbered;
|
||||
interrupt-parent = <&exti>;
|
||||
st,syscfg = <&exti 0x60 0xff>;
|
||||
hwlocks = <&hwspinlock 0>;
|
||||
|
||||
gpioz: gpio@54004000 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
reg = <0 0x400>;
|
||||
clocks = <&rcc GPIOZ>;
|
||||
st,bank-name = "GPIOZ";
|
||||
st,bank-ioport = <11>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
mlahb {
|
||||
compatible = "simple-bus";
|
||||
mlahb: ahb {
|
||||
compatible = "st,mlahb", "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
dma-ranges = <0x00000000 0x38000000 0x10000>,
|
||||
<0x10000000 0x10000000 0x60000>,
|
||||
<0x30000000 0x30000000 0x60000>;
|
||||
|
|
@ -0,0 +1,45 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (C) STMicroelectronics 2019 - All Rights Reserved
|
||||
* Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
|
||||
*/
|
||||
|
||||
#include "stm32mp151.dtsi"
|
||||
|
||||
/ {
|
||||
cpus {
|
||||
cpu1: cpu@1 {
|
||||
compatible = "arm,cortex-a7";
|
||||
device_type = "cpu";
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
soc {
|
||||
m_can1: can@4400e000 {
|
||||
compatible = "bosch,m_can";
|
||||
reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
|
||||
reg-names = "m_can", "message_ram";
|
||||
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "int0", "int1";
|
||||
clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
|
||||
clock-names = "hclk", "cclk";
|
||||
bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
m_can2: can@4400f000 {
|
||||
compatible = "bosch,m_can";
|
||||
reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
|
||||
reg-names = "m_can", "message_ram";
|
||||
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "int0", "int1";
|
||||
clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
|
||||
clock-names = "hclk", "cclk";
|
||||
bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,31 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (C) STMicroelectronics 2019 - All Rights Reserved
|
||||
* Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
|
||||
*/
|
||||
|
||||
#include "stm32mp153.dtsi"
|
||||
|
||||
/ {
|
||||
soc {
|
||||
gpu: gpu@59000000 {
|
||||
compatible = "vivante,gc";
|
||||
reg = <0x59000000 0x800>;
|
||||
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&rcc GPU>, <&rcc GPU_K>;
|
||||
clock-names = "bus" ,"core";
|
||||
resets = <&rcc GPU_R>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
dsi: dsi@5a000000 {
|
||||
compatible = "st,stm32-dsi";
|
||||
reg = <0x5a000000 0x800>;
|
||||
clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>;
|
||||
clock-names = "pclk", "ref", "px_clk";
|
||||
resets = <&rcc DSI_R>;
|
||||
reset-names = "apb";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -7,7 +7,7 @@
|
|||
*/
|
||||
|
||||
#include <dt-bindings/clock/stm32mp1-clksrc.h>
|
||||
#include "stm32mp157-u-boot.dtsi"
|
||||
#include "stm32mp15-u-boot.dtsi"
|
||||
#include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi"
|
||||
|
||||
/ {
|
||||
|
|
@ -145,7 +145,10 @@
|
|||
|
||||
&sdmmc1_b4_pins_a {
|
||||
u-boot,dm-spl;
|
||||
pins {
|
||||
pins1 {
|
||||
u-boot,dm-spl;
|
||||
};
|
||||
pins2 {
|
||||
u-boot,dm-spl;
|
||||
};
|
||||
};
|
||||
|
|
@ -196,7 +199,3 @@
|
|||
u-boot,force-b-session-valid;
|
||||
hnp-srp-disable;
|
||||
};
|
||||
|
||||
&v3v3 {
|
||||
regulator-always-on;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -6,8 +6,9 @@
|
|||
|
||||
/dts-v1/;
|
||||
|
||||
#include "stm32mp157c.dtsi"
|
||||
#include "stm32mp157xac-pinctrl.dtsi"
|
||||
#include "stm32mp157.dtsi"
|
||||
#include "stm32mp15-pinctrl.dtsi"
|
||||
#include "stm32mp15xxac-pinctrl.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/mfd/st,stpmic1.h>
|
||||
|
||||
|
|
|
|||
|
|
@ -4,7 +4,7 @@
|
|||
*/
|
||||
|
||||
#include <dt-bindings/clock/stm32mp1-clksrc.h>
|
||||
#include "stm32mp157-u-boot.dtsi"
|
||||
#include "stm32mp15-u-boot.dtsi"
|
||||
#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi"
|
||||
|
||||
/ {
|
||||
|
|
@ -164,7 +164,10 @@
|
|||
|
||||
&sdmmc1_b4_pins_a {
|
||||
u-boot,dm-spl;
|
||||
pins {
|
||||
pins1 {
|
||||
u-boot,dm-spl;
|
||||
};
|
||||
pins2 {
|
||||
u-boot,dm-spl;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -6,10 +6,10 @@
|
|||
|
||||
/dts-v1/;
|
||||
|
||||
#include "stm32mp157c.dtsi"
|
||||
#include "stm32mp157xac-pinctrl.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/mfd/st,stpmic1.h>
|
||||
#include "stm32mp157.dtsi"
|
||||
#include "stm32mp15-pinctrl.dtsi"
|
||||
#include "stm32mp15xxac-pinctrl.dtsi"
|
||||
#include "stm32mp15xx-dkx.dtsi"
|
||||
|
||||
/ {
|
||||
model = "STMicroelectronics STM32MP157A-DK1 Discovery Board";
|
||||
|
|
@ -23,537 +23,4 @@
|
|||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@c0000000 {
|
||||
device_type = "memory";
|
||||
reg = <0xc0000000 0x20000000>;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
mcuram2: mcuram2@10000000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x10000000 0x40000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
vdev0vring0: vdev0vring0@10040000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x10040000 0x1000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
vdev0vring1: vdev0vring1@10041000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x10041000 0x1000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
vdev0buffer: vdev0buffer@10042000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x10042000 0x4000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
mcuram: mcuram@30000000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x30000000 0x40000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
retram: retram@38000000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x38000000 0x10000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
gpu_reserved: gpu@d4000000 {
|
||||
reg = <0xd4000000 0x4000000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
led {
|
||||
compatible = "gpio-leds";
|
||||
blue {
|
||||
label = "heartbeat";
|
||||
gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "audio-graph-card";
|
||||
label = "STM32MP1-DK";
|
||||
routing =
|
||||
"Playback" , "MCLK",
|
||||
"Capture" , "MCLK",
|
||||
"MICL" , "Mic Bias";
|
||||
dais = <&sai2a_port &sai2b_port &i2s2_port>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&adc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>;
|
||||
vdd-supply = <&vdd>;
|
||||
vdda-supply = <&vdd>;
|
||||
vref-supply = <&vrefbuf>;
|
||||
status = "disabled";
|
||||
adc1: adc@0 {
|
||||
/*
|
||||
* Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19.
|
||||
* Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
|
||||
* 5 * (56 + 47kOhms) * 5pF => 2.5us.
|
||||
* Use arbitrary margin here (e.g. 5us).
|
||||
*/
|
||||
st,min-sample-time-nsecs = <5000>;
|
||||
/* AIN connector, USB Type-C CC1 & CC2 */
|
||||
st,adc-channels = <0 1 6 13 18 19>;
|
||||
status = "okay";
|
||||
};
|
||||
adc2: adc@100 {
|
||||
/* AIN connector, USB Type-C CC1 & CC2 */
|
||||
st,adc-channels = <0 1 2 6 18 19>;
|
||||
st,min-sample-time-nsecs = <5000>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&cec {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&cec_pins_b>;
|
||||
pinctrl-1 = <&cec_pins_sleep_b>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ðernet0 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <ðernet0_rgmii_pins_a>;
|
||||
pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
phy-mode = "rgmii-id";
|
||||
max-speed = <1000>;
|
||||
phy-handle = <&phy0>;
|
||||
|
||||
mdio0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "snps,dwmac-mdio";
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpu {
|
||||
contiguous-area = <&gpu_reserved>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&i2c1_pins_a>;
|
||||
pinctrl-1 = <&i2c1_pins_sleep_a>;
|
||||
i2c-scl-rising-time-ns = <100>;
|
||||
i2c-scl-falling-time-ns = <7>;
|
||||
status = "okay";
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
|
||||
hdmi-transmitter@39 {
|
||||
compatible = "sil,sii9022";
|
||||
reg = <0x39>;
|
||||
iovcc-supply = <&v3v3_hdmi>;
|
||||
cvcc12-supply = <&v1v2_hdmi>;
|
||||
reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
|
||||
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-parent = <&gpiog>;
|
||||
#sound-dai-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
sii9022_in: endpoint {
|
||||
remote-endpoint = <<dc_ep0_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
sii9022_tx_endpoint: endpoint {
|
||||
remote-endpoint = <&i2s2_endpoint>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
cs42l51: cs42l51@4a {
|
||||
compatible = "cirrus,cs42l51";
|
||||
reg = <0x4a>;
|
||||
#sound-dai-cells = <0>;
|
||||
VL-supply = <&v3v3>;
|
||||
VD-supply = <&v1v8_audio>;
|
||||
VA-supply = <&v1v8_audio>;
|
||||
VAHP-supply = <&v1v8_audio>;
|
||||
reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
|
||||
clocks = <&sai2a>;
|
||||
clock-names = "MCLK";
|
||||
status = "okay";
|
||||
|
||||
cs42l51_port: port {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cs42l51_tx_endpoint: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&sai2a_endpoint>;
|
||||
frame-master;
|
||||
bitclock-master;
|
||||
};
|
||||
|
||||
cs42l51_rx_endpoint: endpoint@1 {
|
||||
reg = <1>;
|
||||
remote-endpoint = <&sai2b_endpoint>;
|
||||
frame-master;
|
||||
bitclock-master;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c4_pins_a>;
|
||||
i2c-scl-rising-time-ns = <185>;
|
||||
i2c-scl-falling-time-ns = <20>;
|
||||
status = "okay";
|
||||
/* spare dmas for other usage */
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
|
||||
typec: stusb1600@28 {
|
||||
compatible = "st,stusb1600";
|
||||
reg = <0x28>;
|
||||
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-parent = <&gpioi>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&stusb1600_pins_a>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
typec_con: connector {
|
||||
compatible = "usb-c-connector";
|
||||
label = "USB-C";
|
||||
power-role = "sink";
|
||||
power-opmode = "default";
|
||||
};
|
||||
};
|
||||
|
||||
pmic: stpmic@33 {
|
||||
compatible = "st,stpmic1";
|
||||
reg = <0x33>;
|
||||
interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
status = "okay";
|
||||
|
||||
regulators {
|
||||
compatible = "st,stpmic1-regulators";
|
||||
ldo1-supply = <&v3v3>;
|
||||
ldo3-supply = <&vdd_ddr>;
|
||||
ldo6-supply = <&v3v3>;
|
||||
pwr_sw1-supply = <&bst_out>;
|
||||
pwr_sw2-supply = <&bst_out>;
|
||||
|
||||
vddcore: buck1 {
|
||||
regulator-name = "vddcore";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-initial-mode = <0>;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
vdd_ddr: buck2 {
|
||||
regulator-name = "vdd_ddr";
|
||||
regulator-min-microvolt = <1350000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-initial-mode = <0>;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
vdd: buck3 {
|
||||
regulator-name = "vdd";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
st,mask-reset;
|
||||
regulator-initial-mode = <0>;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
v3v3: buck4 {
|
||||
regulator-name = "v3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-over-current-protection;
|
||||
regulator-initial-mode = <0>;
|
||||
};
|
||||
|
||||
v1v8_audio: ldo1 {
|
||||
regulator-name = "v1v8_audio";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
interrupts = <IT_CURLIM_LDO1 0>;
|
||||
};
|
||||
|
||||
v3v3_hdmi: ldo2 {
|
||||
regulator-name = "v3v3_hdmi";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
interrupts = <IT_CURLIM_LDO2 0>;
|
||||
};
|
||||
|
||||
vtt_ddr: ldo3 {
|
||||
regulator-name = "vtt_ddr";
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-always-on;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
vdd_usb: ldo4 {
|
||||
regulator-name = "vdd_usb";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
interrupts = <IT_CURLIM_LDO4 0>;
|
||||
};
|
||||
|
||||
vdda: ldo5 {
|
||||
regulator-name = "vdda";
|
||||
regulator-min-microvolt = <2900000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
interrupts = <IT_CURLIM_LDO5 0>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
v1v2_hdmi: ldo6 {
|
||||
regulator-name = "v1v2_hdmi";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-always-on;
|
||||
interrupts = <IT_CURLIM_LDO6 0>;
|
||||
};
|
||||
|
||||
vref_ddr: vref_ddr {
|
||||
regulator-name = "vref_ddr";
|
||||
regulator-always-on;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
bst_out: boost {
|
||||
regulator-name = "bst_out";
|
||||
interrupts = <IT_OCP_BOOST 0>;
|
||||
};
|
||||
|
||||
vbus_otg: pwr_sw1 {
|
||||
regulator-name = "vbus_otg";
|
||||
interrupts = <IT_OCP_OTG 0>;
|
||||
};
|
||||
|
||||
vbus_sw: pwr_sw2 {
|
||||
regulator-name = "vbus_sw";
|
||||
interrupts = <IT_OCP_SWOUT 0>;
|
||||
regulator-active-discharge = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
onkey {
|
||||
compatible = "st,stpmic1-onkey";
|
||||
interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
|
||||
interrupt-names = "onkey-falling", "onkey-rising";
|
||||
power-off-time-sec = <10>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
watchdog {
|
||||
compatible = "st,stpmic1-wdt";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2s2 {
|
||||
clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
|
||||
clock-names = "pclk", "i2sclk", "x8k", "x11k";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&i2s2_pins_a>;
|
||||
pinctrl-1 = <&i2s2_pins_sleep_a>;
|
||||
status = "okay";
|
||||
|
||||
i2s2_port: port {
|
||||
i2s2_endpoint: endpoint {
|
||||
remote-endpoint = <&sii9022_tx_endpoint>;
|
||||
format = "i2s";
|
||||
mclk-fs = <256>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ipcc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&iwdg2 {
|
||||
timeout-sec = <32>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
<dc {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <<dc_pins_a>;
|
||||
pinctrl-1 = <<dc_pins_sleep_a>;
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ltdc_ep0_out: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&sii9022_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&m4_rproc {
|
||||
memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
|
||||
<&vdev0vring1>, <&vdev0buffer>;
|
||||
mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
|
||||
mbox-names = "vq0", "vq1", "shutdown";
|
||||
interrupt-parent = <&exti>;
|
||||
interrupts = <68 1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwr_regulators {
|
||||
vdd-supply = <&vdd>;
|
||||
vdd_3v3_usbfs-supply = <&vdd_usb>;
|
||||
};
|
||||
|
||||
&rng1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rtc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sai2 {
|
||||
clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
|
||||
clock-names = "pclk", "x8k", "x11k";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
|
||||
pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
|
||||
status = "okay";
|
||||
|
||||
sai2a: audio-controller@4400b004 {
|
||||
#clock-cells = <0>;
|
||||
dma-names = "tx";
|
||||
clocks = <&rcc SAI2_K>;
|
||||
clock-names = "sai_ck";
|
||||
status = "okay";
|
||||
|
||||
sai2a_port: port {
|
||||
sai2a_endpoint: endpoint {
|
||||
remote-endpoint = <&cs42l51_tx_endpoint>;
|
||||
format = "i2s";
|
||||
mclk-fs = <256>;
|
||||
dai-tdm-slot-num = <2>;
|
||||
dai-tdm-slot-width = <32>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sai2b: audio-controller@4400b024 {
|
||||
dma-names = "rx";
|
||||
st,sync = <&sai2a 2>;
|
||||
clocks = <&rcc SAI2_K>, <&sai2a>;
|
||||
clock-names = "sai_ck", "MCLK";
|
||||
status = "okay";
|
||||
|
||||
sai2b_port: port {
|
||||
sai2b_endpoint: endpoint {
|
||||
remote-endpoint = <&cs42l51_rx_endpoint>;
|
||||
format = "i2s";
|
||||
mclk-fs = <256>;
|
||||
dai-tdm-slot-num = <2>;
|
||||
dai-tdm-slot-width = <32>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
pinctrl-names = "default", "opendrain", "sleep";
|
||||
pinctrl-0 = <&sdmmc1_b4_pins_a>;
|
||||
pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
|
||||
pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
|
||||
broken-cd;
|
||||
st,neg-edge;
|
||||
bus-width = <4>;
|
||||
vmmc-supply = <&v3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart4_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh_ehci {
|
||||
phys = <&usbphyc_port0>;
|
||||
phy-names = "usb";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbotg_hs {
|
||||
dr_mode = "peripheral";
|
||||
phys = <&usbphyc_port1 0>;
|
||||
phy-names = "usb2-phy";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphyc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphyc_port0 {
|
||||
phy-supply = <&vdd_usb>;
|
||||
};
|
||||
|
||||
&usbphyc_port1 {
|
||||
phy-supply = <&vdd_usb>;
|
||||
};
|
||||
|
||||
&vrefbuf {
|
||||
regulator-min-microvolt = <2500000>;
|
||||
regulator-max-microvolt = <2500000>;
|
||||
vdda-supply = <&vdd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -4,9 +4,3 @@
|
|||
*/
|
||||
|
||||
#include "stm32mp157a-dk1-u-boot.dtsi"
|
||||
|
||||
&i2c1 {
|
||||
hdmi-transmitter@39 {
|
||||
reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -6,11 +6,24 @@
|
|||
|
||||
/dts-v1/;
|
||||
|
||||
#include "stm32mp157a-dk1.dts"
|
||||
#include "stm32mp157.dtsi"
|
||||
#include "stm32mp15xc.dtsi"
|
||||
#include "stm32mp15-pinctrl.dtsi"
|
||||
#include "stm32mp15xxac-pinctrl.dtsi"
|
||||
#include "stm32mp15xx-dkx.dtsi"
|
||||
|
||||
/ {
|
||||
model = "STMicroelectronics STM32MP157C-DK2 Discovery Board";
|
||||
compatible = "st,stm32mp157c-dk2", "st,stm32mp157";
|
||||
|
||||
aliases {
|
||||
ethernet0 = ðernet0;
|
||||
serial0 = &uart4;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
};
|
||||
|
||||
&dsi {
|
||||
|
|
|
|||
|
|
@ -4,7 +4,7 @@
|
|||
*/
|
||||
|
||||
#include <dt-bindings/clock/stm32mp1-clksrc.h>
|
||||
#include "stm32mp157-u-boot.dtsi"
|
||||
#include "stm32mp15-u-boot.dtsi"
|
||||
#include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi"
|
||||
|
||||
/ {
|
||||
|
|
@ -161,7 +161,10 @@
|
|||
|
||||
&sdmmc1_b4_pins_a {
|
||||
u-boot,dm-spl;
|
||||
pins {
|
||||
pins1 {
|
||||
u-boot,dm-spl;
|
||||
};
|
||||
pins2 {
|
||||
u-boot,dm-spl;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -5,8 +5,10 @@
|
|||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include "stm32mp157c.dtsi"
|
||||
#include "stm32mp157xaa-pinctrl.dtsi"
|
||||
#include "stm32mp157.dtsi"
|
||||
#include "stm32mp15xc.dtsi"
|
||||
#include "stm32mp15-pinctrl.dtsi"
|
||||
#include "stm32mp15xxaa-pinctrl.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/mfd/st,stpmic1.h>
|
||||
|
||||
|
|
@ -89,6 +91,22 @@
|
|||
};
|
||||
};
|
||||
|
||||
&adc {
|
||||
/* ANA0, ANA1 are dedicated pins and don't need pinctrl: only in6. */
|
||||
pinctrl-0 = <&adc1_in6_pins_a>;
|
||||
pinctrl-names = "default";
|
||||
vdd-supply = <&vdd>;
|
||||
vdda-supply = <&vdda>;
|
||||
vref-supply = <&vdda>;
|
||||
status = "disabled";
|
||||
adc1: adc@0 {
|
||||
st,adc-channels = <0 1 6>;
|
||||
/* 16.5 ck_cycles sampling time */
|
||||
st,min-sample-time-nsecs = <400>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&dac {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>;
|
||||
|
|
|
|||
|
|
@ -182,8 +182,6 @@
|
|||
|
||||
ov5640: camera@3c {
|
||||
compatible = "ovti,ov5640";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ov5640_pins>;
|
||||
reg = <0x3c>;
|
||||
clocks = <&clk_ext_camera>;
|
||||
clock-names = "xclk";
|
||||
|
|
@ -224,12 +222,6 @@
|
|||
pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
ov5640_pins: camera {
|
||||
pins = "agpio2", "agpio3"; /* stmfx pins 18 & 19 */
|
||||
drive-push-pull;
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -291,6 +283,18 @@
|
|||
};
|
||||
};
|
||||
|
||||
&sdmmc3 {
|
||||
pinctrl-names = "default", "opendrain", "sleep";
|
||||
pinctrl-0 = <&sdmmc3_b4_pins_a>;
|
||||
pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
|
||||
pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
|
||||
broken-cd;
|
||||
st,neg-edge;
|
||||
bus-width = <4>;
|
||||
vmmc-supply = <&v3v3>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi1_pins_a>;
|
||||
|
|
@ -304,7 +308,8 @@
|
|||
status = "disabled";
|
||||
pwm {
|
||||
pinctrl-0 = <&pwm2_pins_a>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-1 = <&pwm2_sleep_pins_a>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
status = "okay";
|
||||
};
|
||||
timer@1 {
|
||||
|
|
@ -318,7 +323,8 @@
|
|||
status = "disabled";
|
||||
pwm {
|
||||
pinctrl-0 = <&pwm8_pins_a>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-1 = <&pwm8_sleep_pins_a>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
status = "okay";
|
||||
};
|
||||
timer@7 {
|
||||
|
|
@ -332,7 +338,8 @@
|
|||
status = "disabled";
|
||||
pwm {
|
||||
pinctrl-0 = <&pwm12_pins_a>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-1 = <&pwm12_sleep_pins_a>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
status = "okay";
|
||||
};
|
||||
timer@11 {
|
||||
|
|
@ -348,6 +355,7 @@
|
|||
&usbotg_hs {
|
||||
dr_mode = "peripheral";
|
||||
phys = <&usbphyc_port1 0>;
|
||||
phy-names = "usb2-phy";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -1,90 +0,0 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (C) STMicroelectronics 2019 - All Rights Reserved
|
||||
* Author: Alexandre Torgue <alexandre.torgue@st.com>
|
||||
*/
|
||||
|
||||
#include "stm32mp157-pinctrl.dtsi"
|
||||
/ {
|
||||
soc {
|
||||
pinctrl: pin-controller@50002000 {
|
||||
st,package = <STM32MP_PKG_AA>;
|
||||
|
||||
gpioa: gpio@50002000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 0 16>;
|
||||
};
|
||||
|
||||
gpiob: gpio@50003000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 16 16>;
|
||||
};
|
||||
|
||||
gpioc: gpio@50004000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 32 16>;
|
||||
};
|
||||
|
||||
gpiod: gpio@50005000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 48 16>;
|
||||
};
|
||||
|
||||
gpioe: gpio@50006000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 64 16>;
|
||||
};
|
||||
|
||||
gpiof: gpio@50007000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 80 16>;
|
||||
};
|
||||
|
||||
gpiog: gpio@50008000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 96 16>;
|
||||
};
|
||||
|
||||
gpioh: gpio@50009000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 112 16>;
|
||||
};
|
||||
|
||||
gpioi: gpio@5000a000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 128 16>;
|
||||
};
|
||||
|
||||
gpioj: gpio@5000b000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 144 16>;
|
||||
};
|
||||
|
||||
gpiok: gpio@5000c000 {
|
||||
status = "okay";
|
||||
ngpios = <8>;
|
||||
gpio-ranges = <&pinctrl 0 160 8>;
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl_z: pin-controller-z@54004000 {
|
||||
st,package = <STM32MP_PKG_AA>;
|
||||
|
||||
gpioz: gpio@54004000 {
|
||||
status = "okay";
|
||||
ngpios = <8>;
|
||||
gpio-ranges = <&pinctrl_z 0 400 8>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -1,62 +0,0 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (C) STMicroelectronics 2019 - All Rights Reserved
|
||||
* Author: Alexandre Torgue <alexandre.torgue@st.com>
|
||||
*/
|
||||
|
||||
#include "stm32mp157-pinctrl.dtsi"
|
||||
/ {
|
||||
soc {
|
||||
pinctrl: pin-controller@50002000 {
|
||||
st,package = <STM32MP_PKG_AB>;
|
||||
|
||||
gpioa: gpio@50002000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 0 16>;
|
||||
};
|
||||
|
||||
gpiob: gpio@50003000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 16 16>;
|
||||
};
|
||||
|
||||
gpioc: gpio@50004000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 32 16>;
|
||||
};
|
||||
|
||||
gpiod: gpio@50005000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 48 16>;
|
||||
};
|
||||
|
||||
gpioe: gpio@50006000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 64 16>;
|
||||
};
|
||||
|
||||
gpiof: gpio@50007000 {
|
||||
status = "okay";
|
||||
ngpios = <6>;
|
||||
gpio-ranges = <&pinctrl 6 86 6>;
|
||||
};
|
||||
|
||||
gpiog: gpio@50008000 {
|
||||
status = "okay";
|
||||
ngpios = <10>;
|
||||
gpio-ranges = <&pinctrl 6 102 10>;
|
||||
};
|
||||
|
||||
gpioh: gpio@50009000 {
|
||||
status = "okay";
|
||||
ngpios = <2>;
|
||||
gpio-ranges = <&pinctrl 0 112 2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -1,78 +0,0 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (C) STMicroelectronics 2019 - All Rights Reserved
|
||||
* Author: Alexandre Torgue <alexandre.torgue@st.com>
|
||||
*/
|
||||
|
||||
#include "stm32mp157-pinctrl.dtsi"
|
||||
/ {
|
||||
soc {
|
||||
pinctrl: pin-controller@50002000 {
|
||||
st,package = <STM32MP_PKG_AC>;
|
||||
|
||||
gpioa: gpio@50002000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 0 16>;
|
||||
};
|
||||
|
||||
gpiob: gpio@50003000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 16 16>;
|
||||
};
|
||||
|
||||
gpioc: gpio@50004000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 32 16>;
|
||||
};
|
||||
|
||||
gpiod: gpio@50005000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 48 16>;
|
||||
};
|
||||
|
||||
gpioe: gpio@50006000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 64 16>;
|
||||
};
|
||||
|
||||
gpiof: gpio@50007000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 80 16>;
|
||||
};
|
||||
|
||||
gpiog: gpio@50008000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 96 16>;
|
||||
};
|
||||
|
||||
gpioh: gpio@50009000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 112 16>;
|
||||
};
|
||||
|
||||
gpioi: gpio@5000a000 {
|
||||
status = "okay";
|
||||
ngpios = <12>;
|
||||
gpio-ranges = <&pinctrl 0 128 12>;
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl_z: pin-controller-z@54004000 {
|
||||
st,package = <STM32MP_PKG_AC>;
|
||||
|
||||
gpioz: gpio@54004000 {
|
||||
status = "okay";
|
||||
ngpios = <8>;
|
||||
gpio-ranges = <&pinctrl_z 0 400 8>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -1,62 +0,0 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (C) STMicroelectronics 2019 - All Rights Reserved
|
||||
* Author: Alexandre Torgue <alexandre.torgue@st.com>
|
||||
*/
|
||||
|
||||
#include "stm32mp157-pinctrl.dtsi"
|
||||
/ {
|
||||
soc {
|
||||
pinctrl: pin-controller@50002000 {
|
||||
st,package = <STM32MP_PKG_AD>;
|
||||
|
||||
gpioa: gpio@50002000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 0 16>;
|
||||
};
|
||||
|
||||
gpiob: gpio@50003000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 16 16>;
|
||||
};
|
||||
|
||||
gpioc: gpio@50004000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 32 16>;
|
||||
};
|
||||
|
||||
gpiod: gpio@50005000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 48 16>;
|
||||
};
|
||||
|
||||
gpioe: gpio@50006000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 64 16>;
|
||||
};
|
||||
|
||||
gpiof: gpio@50007000 {
|
||||
status = "okay";
|
||||
ngpios = <6>;
|
||||
gpio-ranges = <&pinctrl 6 86 6>;
|
||||
};
|
||||
|
||||
gpiog: gpio@50008000 {
|
||||
status = "okay";
|
||||
ngpios = <10>;
|
||||
gpio-ranges = <&pinctrl 6 102 10>;
|
||||
};
|
||||
|
||||
gpioh: gpio@50009000 {
|
||||
status = "okay";
|
||||
ngpios = <2>;
|
||||
gpio-ranges = <&pinctrl 0 112 2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,18 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (C) STMicroelectronics 2019 - All Rights Reserved
|
||||
* Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
|
||||
*/
|
||||
|
||||
/ {
|
||||
soc {
|
||||
cryp1: cryp@54001000 {
|
||||
compatible = "st,stm32mp1-cryp";
|
||||
reg = <0x54001000 0x400>;
|
||||
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&rcc CRYP1>;
|
||||
resets = <&rcc CRYP1_R>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -4,7 +4,7 @@
|
|||
*/
|
||||
|
||||
#include <dt-bindings/clock/stm32mp1-clksrc.h>
|
||||
#include "stm32mp157-u-boot.dtsi"
|
||||
#include "stm32mp15-u-boot.dtsi"
|
||||
#include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi"
|
||||
|
||||
/ {
|
||||
|
|
@ -196,7 +196,10 @@
|
|||
|
||||
&sdmmc1_b4_pins_a {
|
||||
u-boot,dm-spl;
|
||||
pins {
|
||||
pins1 {
|
||||
u-boot,dm-spl;
|
||||
};
|
||||
pins2 {
|
||||
u-boot,dm-spl;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -4,8 +4,10 @@
|
|||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include "stm32mp157c.dtsi"
|
||||
#include "stm32mp157xaa-pinctrl.dtsi"
|
||||
#include "stm32mp157.dtsi"
|
||||
#include "stm32mp15xc.dtsi"
|
||||
#include "stm32mp15-pinctrl.dtsi"
|
||||
#include "stm32mp15xxaa-pinctrl.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/mfd/st,stpmic1.h>
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,639 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (C) STMicroelectronics 2019 - All Rights Reserved
|
||||
* Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/mfd/st,stpmic1.h>
|
||||
|
||||
/ {
|
||||
memory@c0000000 {
|
||||
device_type = "memory";
|
||||
reg = <0xc0000000 0x20000000>;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
mcuram2: mcuram2@10000000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x10000000 0x40000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
vdev0vring0: vdev0vring0@10040000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x10040000 0x1000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
vdev0vring1: vdev0vring1@10041000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x10041000 0x1000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
vdev0buffer: vdev0buffer@10042000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x10042000 0x4000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
mcuram: mcuram@30000000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x30000000 0x40000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
retram: retram@38000000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x38000000 0x10000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
gpu_reserved: gpu@d4000000 {
|
||||
reg = <0xd4000000 0x4000000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
led {
|
||||
compatible = "gpio-leds";
|
||||
blue {
|
||||
label = "heartbeat";
|
||||
gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "audio-graph-card";
|
||||
label = "STM32MP1-DK";
|
||||
routing =
|
||||
"Playback" , "MCLK",
|
||||
"Capture" , "MCLK",
|
||||
"MICL" , "Mic Bias";
|
||||
dais = <&sai2a_port &sai2b_port &i2s2_port>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&adc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>;
|
||||
vdd-supply = <&vdd>;
|
||||
vdda-supply = <&vdd>;
|
||||
vref-supply = <&vrefbuf>;
|
||||
status = "disabled";
|
||||
adc1: adc@0 {
|
||||
/*
|
||||
* Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19.
|
||||
* Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
|
||||
* 5 * (56 + 47kOhms) * 5pF => 2.5us.
|
||||
* Use arbitrary margin here (e.g. 5us).
|
||||
*/
|
||||
st,min-sample-time-nsecs = <5000>;
|
||||
/* AIN connector, USB Type-C CC1 & CC2 */
|
||||
st,adc-channels = <0 1 6 13 18 19>;
|
||||
status = "okay";
|
||||
};
|
||||
adc2: adc@100 {
|
||||
/* AIN connector, USB Type-C CC1 & CC2 */
|
||||
st,adc-channels = <0 1 2 6 18 19>;
|
||||
st,min-sample-time-nsecs = <5000>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&cec {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&cec_pins_b>;
|
||||
pinctrl-1 = <&cec_pins_sleep_b>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ðernet0 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <ðernet0_rgmii_pins_a>;
|
||||
pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
phy-mode = "rgmii-id";
|
||||
max-speed = <1000>;
|
||||
phy-handle = <&phy0>;
|
||||
|
||||
mdio0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "snps,dwmac-mdio";
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpu {
|
||||
contiguous-area = <&gpu_reserved>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&i2c1_pins_a>;
|
||||
pinctrl-1 = <&i2c1_pins_sleep_a>;
|
||||
i2c-scl-rising-time-ns = <100>;
|
||||
i2c-scl-falling-time-ns = <7>;
|
||||
status = "okay";
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
|
||||
hdmi-transmitter@39 {
|
||||
compatible = "sil,sii9022";
|
||||
reg = <0x39>;
|
||||
iovcc-supply = <&v3v3_hdmi>;
|
||||
cvcc12-supply = <&v1v2_hdmi>;
|
||||
reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
|
||||
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-parent = <&gpiog>;
|
||||
#sound-dai-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
sii9022_in: endpoint {
|
||||
remote-endpoint = <<dc_ep0_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
sii9022_tx_endpoint: endpoint {
|
||||
remote-endpoint = <&i2s2_endpoint>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
cs42l51: cs42l51@4a {
|
||||
compatible = "cirrus,cs42l51";
|
||||
reg = <0x4a>;
|
||||
#sound-dai-cells = <0>;
|
||||
VL-supply = <&v3v3>;
|
||||
VD-supply = <&v1v8_audio>;
|
||||
VA-supply = <&v1v8_audio>;
|
||||
VAHP-supply = <&v1v8_audio>;
|
||||
reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
|
||||
clocks = <&sai2a>;
|
||||
clock-names = "MCLK";
|
||||
status = "okay";
|
||||
|
||||
cs42l51_port: port {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cs42l51_tx_endpoint: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&sai2a_endpoint>;
|
||||
frame-master;
|
||||
bitclock-master;
|
||||
};
|
||||
|
||||
cs42l51_rx_endpoint: endpoint@1 {
|
||||
reg = <1>;
|
||||
remote-endpoint = <&sai2b_endpoint>;
|
||||
frame-master;
|
||||
bitclock-master;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c4_pins_a>;
|
||||
i2c-scl-rising-time-ns = <185>;
|
||||
i2c-scl-falling-time-ns = <20>;
|
||||
status = "okay";
|
||||
/* spare dmas for other usage */
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
|
||||
typec: stusb1600@28 {
|
||||
compatible = "st,stusb1600";
|
||||
reg = <0x28>;
|
||||
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-parent = <&gpioi>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&stusb1600_pins_a>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
typec_con: connector {
|
||||
compatible = "usb-c-connector";
|
||||
label = "USB-C";
|
||||
power-role = "sink";
|
||||
power-opmode = "default";
|
||||
};
|
||||
};
|
||||
|
||||
pmic: stpmic@33 {
|
||||
compatible = "st,stpmic1";
|
||||
reg = <0x33>;
|
||||
interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
status = "okay";
|
||||
|
||||
regulators {
|
||||
compatible = "st,stpmic1-regulators";
|
||||
ldo1-supply = <&v3v3>;
|
||||
ldo3-supply = <&vdd_ddr>;
|
||||
ldo6-supply = <&v3v3>;
|
||||
pwr_sw1-supply = <&bst_out>;
|
||||
pwr_sw2-supply = <&bst_out>;
|
||||
|
||||
vddcore: buck1 {
|
||||
regulator-name = "vddcore";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-initial-mode = <0>;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
vdd_ddr: buck2 {
|
||||
regulator-name = "vdd_ddr";
|
||||
regulator-min-microvolt = <1350000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-initial-mode = <0>;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
vdd: buck3 {
|
||||
regulator-name = "vdd";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
st,mask-reset;
|
||||
regulator-initial-mode = <0>;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
v3v3: buck4 {
|
||||
regulator-name = "v3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-over-current-protection;
|
||||
regulator-initial-mode = <0>;
|
||||
};
|
||||
|
||||
v1v8_audio: ldo1 {
|
||||
regulator-name = "v1v8_audio";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
interrupts = <IT_CURLIM_LDO1 0>;
|
||||
};
|
||||
|
||||
v3v3_hdmi: ldo2 {
|
||||
regulator-name = "v3v3_hdmi";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
interrupts = <IT_CURLIM_LDO2 0>;
|
||||
};
|
||||
|
||||
vtt_ddr: ldo3 {
|
||||
regulator-name = "vtt_ddr";
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-always-on;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
vdd_usb: ldo4 {
|
||||
regulator-name = "vdd_usb";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
interrupts = <IT_CURLIM_LDO4 0>;
|
||||
};
|
||||
|
||||
vdda: ldo5 {
|
||||
regulator-name = "vdda";
|
||||
regulator-min-microvolt = <2900000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
interrupts = <IT_CURLIM_LDO5 0>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
v1v2_hdmi: ldo6 {
|
||||
regulator-name = "v1v2_hdmi";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-always-on;
|
||||
interrupts = <IT_CURLIM_LDO6 0>;
|
||||
};
|
||||
|
||||
vref_ddr: vref_ddr {
|
||||
regulator-name = "vref_ddr";
|
||||
regulator-always-on;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
bst_out: boost {
|
||||
regulator-name = "bst_out";
|
||||
interrupts = <IT_OCP_BOOST 0>;
|
||||
};
|
||||
|
||||
vbus_otg: pwr_sw1 {
|
||||
regulator-name = "vbus_otg";
|
||||
interrupts = <IT_OCP_OTG 0>;
|
||||
};
|
||||
|
||||
vbus_sw: pwr_sw2 {
|
||||
regulator-name = "vbus_sw";
|
||||
interrupts = <IT_OCP_SWOUT 0>;
|
||||
regulator-active-discharge = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
onkey {
|
||||
compatible = "st,stpmic1-onkey";
|
||||
interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
|
||||
interrupt-names = "onkey-falling", "onkey-rising";
|
||||
power-off-time-sec = <10>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
watchdog {
|
||||
compatible = "st,stpmic1-wdt";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2s2 {
|
||||
clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
|
||||
clock-names = "pclk", "i2sclk", "x8k", "x11k";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&i2s2_pins_a>;
|
||||
pinctrl-1 = <&i2s2_pins_sleep_a>;
|
||||
status = "okay";
|
||||
|
||||
i2s2_port: port {
|
||||
i2s2_endpoint: endpoint {
|
||||
remote-endpoint = <&sii9022_tx_endpoint>;
|
||||
format = "i2s";
|
||||
mclk-fs = <256>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ipcc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&iwdg2 {
|
||||
timeout-sec = <32>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
<dc {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <<dc_pins_a>;
|
||||
pinctrl-1 = <<dc_pins_sleep_a>;
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ltdc_ep0_out: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&sii9022_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&m4_rproc {
|
||||
memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
|
||||
<&vdev0vring1>, <&vdev0buffer>;
|
||||
mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
|
||||
mbox-names = "vq0", "vq1", "shutdown";
|
||||
interrupt-parent = <&exti>;
|
||||
interrupts = <68 1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwr_regulators {
|
||||
vdd-supply = <&vdd>;
|
||||
vdd_3v3_usbfs-supply = <&vdd_usb>;
|
||||
};
|
||||
|
||||
&rng1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rtc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sai2 {
|
||||
clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
|
||||
clock-names = "pclk", "x8k", "x11k";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
|
||||
pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
|
||||
status = "okay";
|
||||
|
||||
sai2a: audio-controller@4400b004 {
|
||||
#clock-cells = <0>;
|
||||
dma-names = "tx";
|
||||
clocks = <&rcc SAI2_K>;
|
||||
clock-names = "sai_ck";
|
||||
status = "okay";
|
||||
|
||||
sai2a_port: port {
|
||||
sai2a_endpoint: endpoint {
|
||||
remote-endpoint = <&cs42l51_tx_endpoint>;
|
||||
format = "i2s";
|
||||
mclk-fs = <256>;
|
||||
dai-tdm-slot-num = <2>;
|
||||
dai-tdm-slot-width = <32>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sai2b: audio-controller@4400b024 {
|
||||
dma-names = "rx";
|
||||
st,sync = <&sai2a 2>;
|
||||
clocks = <&rcc SAI2_K>, <&sai2a>;
|
||||
clock-names = "sai_ck", "MCLK";
|
||||
status = "okay";
|
||||
|
||||
sai2b_port: port {
|
||||
sai2b_endpoint: endpoint {
|
||||
remote-endpoint = <&cs42l51_rx_endpoint>;
|
||||
format = "i2s";
|
||||
mclk-fs = <256>;
|
||||
dai-tdm-slot-num = <2>;
|
||||
dai-tdm-slot-width = <32>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
pinctrl-names = "default", "opendrain", "sleep";
|
||||
pinctrl-0 = <&sdmmc1_b4_pins_a>;
|
||||
pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
|
||||
pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
|
||||
broken-cd;
|
||||
st,neg-edge;
|
||||
bus-width = <4>;
|
||||
vmmc-supply = <&v3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc3 {
|
||||
pinctrl-names = "default", "opendrain", "sleep";
|
||||
pinctrl-0 = <&sdmmc3_b4_pins_a>;
|
||||
pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
|
||||
pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
|
||||
broken-cd;
|
||||
st,neg-edge;
|
||||
bus-width = <4>;
|
||||
vmmc-supply = <&v3v3>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&timers1 {
|
||||
/* spare dmas for other usage */
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
status = "disabled";
|
||||
pwm {
|
||||
pinctrl-0 = <&pwm1_pins_a>;
|
||||
pinctrl-1 = <&pwm1_sleep_pins_a>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
status = "okay";
|
||||
};
|
||||
timer@0 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&timers3 {
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
status = "disabled";
|
||||
pwm {
|
||||
pinctrl-0 = <&pwm3_pins_a>;
|
||||
pinctrl-1 = <&pwm3_sleep_pins_a>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
status = "okay";
|
||||
};
|
||||
timer@2 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&timers4 {
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
status = "disabled";
|
||||
pwm {
|
||||
pinctrl-0 = <&pwm4_pins_a &pwm4_pins_b>;
|
||||
pinctrl-1 = <&pwm4_sleep_pins_a &pwm4_sleep_pins_b>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
status = "okay";
|
||||
};
|
||||
timer@3 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&timers5 {
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
status = "disabled";
|
||||
pwm {
|
||||
pinctrl-0 = <&pwm5_pins_a>;
|
||||
pinctrl-1 = <&pwm5_sleep_pins_a>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
status = "okay";
|
||||
};
|
||||
timer@4 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&timers6 {
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
status = "disabled";
|
||||
timer@5 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&timers12 {
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
status = "disabled";
|
||||
pwm {
|
||||
pinctrl-0 = <&pwm12_pins_a>;
|
||||
pinctrl-1 = <&pwm12_sleep_pins_a>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
status = "okay";
|
||||
};
|
||||
timer@11 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart4_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh_ehci {
|
||||
phys = <&usbphyc_port0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbotg_hs {
|
||||
dr_mode = "peripheral";
|
||||
phys = <&usbphyc_port1 0>;
|
||||
phy-names = "usb2-phy";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphyc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphyc_port0 {
|
||||
phy-supply = <&vdd_usb>;
|
||||
};
|
||||
|
||||
&usbphyc_port1 {
|
||||
phy-supply = <&vdd_usb>;
|
||||
};
|
||||
|
||||
&vrefbuf {
|
||||
regulator-min-microvolt = <2500000>;
|
||||
regulator-max-microvolt = <2500000>;
|
||||
vdda-supply = <&vdd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -0,0 +1,85 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (C) STMicroelectronics 2019 - All Rights Reserved
|
||||
* Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
|
||||
*/
|
||||
|
||||
&pinctrl {
|
||||
st,package = <STM32MP_PKG_AA>;
|
||||
|
||||
gpioa: gpio@50002000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 0 16>;
|
||||
};
|
||||
|
||||
gpiob: gpio@50003000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 16 16>;
|
||||
};
|
||||
|
||||
gpioc: gpio@50004000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 32 16>;
|
||||
};
|
||||
|
||||
gpiod: gpio@50005000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 48 16>;
|
||||
};
|
||||
|
||||
gpioe: gpio@50006000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 64 16>;
|
||||
};
|
||||
|
||||
gpiof: gpio@50007000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 80 16>;
|
||||
};
|
||||
|
||||
gpiog: gpio@50008000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 96 16>;
|
||||
};
|
||||
|
||||
gpioh: gpio@50009000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 112 16>;
|
||||
};
|
||||
|
||||
gpioi: gpio@5000a000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 128 16>;
|
||||
};
|
||||
|
||||
gpioj: gpio@5000b000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 144 16>;
|
||||
};
|
||||
|
||||
gpiok: gpio@5000c000 {
|
||||
status = "okay";
|
||||
ngpios = <8>;
|
||||
gpio-ranges = <&pinctrl 0 160 8>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl_z {
|
||||
st,package = <STM32MP_PKG_AA>;
|
||||
|
||||
gpioz: gpio@54004000 {
|
||||
status = "okay";
|
||||
ngpios = <8>;
|
||||
gpio-ranges = <&pinctrl_z 0 400 8>;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,57 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (C) STMicroelectronics 2019 - All Rights Reserved
|
||||
* Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
|
||||
*/
|
||||
|
||||
&pinctrl {
|
||||
st,package = <STM32MP_PKG_AB>;
|
||||
|
||||
gpioa: gpio@50002000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 0 16>;
|
||||
};
|
||||
|
||||
gpiob: gpio@50003000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 16 16>;
|
||||
};
|
||||
|
||||
gpioc: gpio@50004000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 32 16>;
|
||||
};
|
||||
|
||||
gpiod: gpio@50005000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 48 16>;
|
||||
};
|
||||
|
||||
gpioe: gpio@50006000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 64 16>;
|
||||
};
|
||||
|
||||
gpiof: gpio@50007000 {
|
||||
status = "okay";
|
||||
ngpios = <6>;
|
||||
gpio-ranges = <&pinctrl 6 86 6>;
|
||||
};
|
||||
|
||||
gpiog: gpio@50008000 {
|
||||
status = "okay";
|
||||
ngpios = <10>;
|
||||
gpio-ranges = <&pinctrl 6 102 10>;
|
||||
};
|
||||
|
||||
gpioh: gpio@50009000 {
|
||||
status = "okay";
|
||||
ngpios = <2>;
|
||||
gpio-ranges = <&pinctrl 0 112 2>;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,73 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (C) STMicroelectronics 2019 - All Rights Reserved
|
||||
* Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
|
||||
*/
|
||||
|
||||
&pinctrl {
|
||||
st,package = <STM32MP_PKG_AC>;
|
||||
|
||||
gpioa: gpio@50002000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 0 16>;
|
||||
};
|
||||
|
||||
gpiob: gpio@50003000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 16 16>;
|
||||
};
|
||||
|
||||
gpioc: gpio@50004000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 32 16>;
|
||||
};
|
||||
|
||||
gpiod: gpio@50005000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 48 16>;
|
||||
};
|
||||
|
||||
gpioe: gpio@50006000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 64 16>;
|
||||
};
|
||||
|
||||
gpiof: gpio@50007000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 80 16>;
|
||||
};
|
||||
|
||||
gpiog: gpio@50008000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 96 16>;
|
||||
};
|
||||
|
||||
gpioh: gpio@50009000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 112 16>;
|
||||
};
|
||||
|
||||
gpioi: gpio@5000a000 {
|
||||
status = "okay";
|
||||
ngpios = <12>;
|
||||
gpio-ranges = <&pinctrl 0 128 12>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl_z {
|
||||
st,package = <STM32MP_PKG_AC>;
|
||||
|
||||
gpioz: gpio@54004000 {
|
||||
status = "okay";
|
||||
ngpios = <8>;
|
||||
gpio-ranges = <&pinctrl_z 0 400 8>;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,57 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (C) STMicroelectronics 2019 - All Rights Reserved
|
||||
* Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
|
||||
*/
|
||||
|
||||
&pinctrl {
|
||||
st,package = <STM32MP_PKG_AD>;
|
||||
|
||||
gpioa: gpio@50002000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 0 16>;
|
||||
};
|
||||
|
||||
gpiob: gpio@50003000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 16 16>;
|
||||
};
|
||||
|
||||
gpioc: gpio@50004000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 32 16>;
|
||||
};
|
||||
|
||||
gpiod: gpio@50005000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 48 16>;
|
||||
};
|
||||
|
||||
gpioe: gpio@50006000 {
|
||||
status = "okay";
|
||||
ngpios = <16>;
|
||||
gpio-ranges = <&pinctrl 0 64 16>;
|
||||
};
|
||||
|
||||
gpiof: gpio@50007000 {
|
||||
status = "okay";
|
||||
ngpios = <6>;
|
||||
gpio-ranges = <&pinctrl 6 86 6>;
|
||||
};
|
||||
|
||||
gpiog: gpio@50008000 {
|
||||
status = "okay";
|
||||
ngpios = <10>;
|
||||
gpio-ranges = <&pinctrl 6 102 10>;
|
||||
};
|
||||
|
||||
gpioh: gpio@50009000 {
|
||||
status = "okay";
|
||||
ngpios = <2>;
|
||||
gpio-ranges = <&pinctrl 0 112 2>;
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue