Commit Graph

3853 Commits

Author SHA1 Message Date
Marek Behún
9e4cdbabac arm: mvebu: dts: turris_mox: fix USB3 regulator
Commit e8e9715df2 requires the USB3 regulator node to have the
enable-active-high property for the regulator to work properly. The
GPIO_ACTIVE_HIGH constant is not enough anymore.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Fixes: e8e9715df2 ("regulator: fixed: Modify enable-active-high...")
Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-14 13:16:42 +02:00
Marek Behún
eddd6f90c9 arm: mvebu: dts: turris_mox: update sdhci properties
With recent changes to the mmc subsystem (chip detect code etc) update
the sdhci node of the Turris Mox device tree.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-14 13:16:42 +02:00
Joel Johnson
a8d0aa31bd arm: mvebu: solidrun: remove hardcoded DTS MAC address
Using a consistent hardcoded MAC address from the DTS file causes
issues when using multiple devices on the same network segment.
Instead rely on environment configuration or random generation.

Signed-off-by: Joel Johnson <mrjoel@lixil.net>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-14 13:16:42 +02:00
Josip Kelecic
5e2de83f71 arm: mvebu: dts: Sort Armada series dts alphabetically
Sort the Armada series dts in the Makefile alphabetically
prior to adding new board support.

Signed-off-by: Josip Kelečić <josip.kelecic@sartura.hr>
Reviewed-by: Luka Kovacic <luka.kovacic@sartura.hr>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-14 13:15:26 +02:00
Vignesh Raghavendra
aaf55800a3 arm: dts: k3-j721e: Increase OSPI default frequency to 50MHz
In 1 bit mode OSPI can work at upto 50MHz, this provides better write
performance. Therefore increase frequency from 40MHz to 50MHz

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-04-14 15:44:48 +05:30
Vignesh Raghavendra
d5a1f4f551 arm: dts: k3-am654: Increase OSPI default frequency to 50MHz
In 1 bit mode OSPI can work at upto 50MHz, this provides better write
performance. Therefore increase frequency from 40MHz to 50MHz

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-04-14 15:44:48 +05:30
Moses Christopher
a31216772a am335x, guardian: load env from NAND
- As there is a requirement to store certain data, we need a persistent
    storage in u-boot. Hence, we need to save env in NAND

  - Add default Guardian environment variables

  - Update partition table:
    - Reserve some space for experimentation, this ensures proper
      backwards compatibility

  - Update defconfig accordingly

Signed-off-by: Moses Christopher <BollavarapuMoses.Christopher@in.bosch.com>
2020-04-14 15:44:48 +05:30
Moses Christopher
f2330691d9 am335x, guardian: boot stage feedback in headless mode
This patch enables the guardian board to provide feedback
  about the boot stage in headless mode. The on-board led
  would behave in the following pattern

    * U-boot -> GLOW LED
    * Linux  -> BLINK LED [HEART-BEAT PATTERN]

Signed-off-by: Moses Christopher <BollavarapuMoses.Christopher@in.bosch.com>
2020-04-14 15:44:48 +05:30
Tom Rini
2af31afc7a Merge branch 'master' of git://git.denx.de/u-boot-socfpga 2020-04-13 16:06:51 -04:00
Tom Rini
8914831860 Merge branch 'next'
Pull in changes that have been pending in our 'next' branch.  This
includes:
- A large number of CI improvements including moving to gcc-9.2 for all
  platforms.
- amlogic, xilinx, stm32, TI SoC updates
- USB and i2c subsystem updtaes
- Re-sync Kbuild/etc logic with v4.19 of the Linux kernel.
- RSA key handling improvements
2020-04-13 11:27:00 -04:00
Ley Foon Tan
3958ef307e arm: socfpga: arria10: Enable cache driver in SPL
Adding "u-boot,dm-pre-reloc" and enable CONFIG_SPL_CACHE
to enable cache driver in SPL.

This fixed error below in SPL:
cache controller driver NOT found!

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-04-13 13:49:51 +02:00
Ley Foon Tan
5feb5e3215 arm: dts: arria10: Update dtsi/dts from Linux
Update these 3 files from Linux:.
- socfpga_arria10.dtsi (Commit ID c1459a9d7e92)
- socfpga_arria10_socdk.dtsi (Commit ID d9b9f805ee2b)
- socfpga_arria10_socdk_sdmmc.dts (Commit ID 17808d445b6f)

Change in socfpga_arria10.dtsi:
- Add clkmgr label, so that can reference to it in u-boot.dtsi.

Change in socfpga_arria10-u-boot.dtsi:
- Add compatible and altr,sysmgr-syscon for uboot.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-04-13 13:49:51 +02:00
Ley Foon Tan
f3fccb12c0 arm: dts: arria10: Move uboot specific properties to u-boot.dtsi
Move Uboot specific properties to *u-boot.dtsi files.
Preparation to sync Arria 10 device tree from Linux.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-04-13 13:49:51 +02:00
Marek Vasut
8876f89640 ARM: socfpga: Enable DM RTC bootcount on ABB SECU1
Add and enable RTC-backed boot counter on ABB SECU1 platform.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-04-13 13:49:51 +02:00
Tom Rini
1ebf50d9bb - clk: meson-g12a: missing break
- sync all Amlogic DT from Linux v5.6-rc2
 - MMC clock fixups
 - add support for Libre Computer AML-S905D-PC and AML-S912-PC
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAl6K4bQACgkQd9zb2sjI
 SdFpIw//QZbwDYFJWb7m3OuutceTWwx6sB/vjYjUBzkRZLBKOWn1WdKmt3PHHcHB
 Mj1CrUGaK29TVSyC654Sn7W75WMWJOQsvLwZVIc+TA6gOGU0P0khn/LitHgIyn9r
 Fo8wCxD9ohVQLfDcgWn/KRkTdX++Sx1IxURvc1ebd82W507XyTjf8dLjgDA6rETF
 3dVlnR/el/UojG0MhxaIce/GVldNukC4Y02Imuw9bV1DvhiXp1GnzVaXqmlChxkr
 rqoKFBelh5c2I85xm8+FunUX9wCDPuMXE75pFOwVX5imAekExaVaZA+y78hWIUTg
 bEFT6Ug0PWaLzZCJAkPKzE3+flJk4tXbG9oXsPIfgGWm7KoC3Lzd6mstpOMzq55V
 NMxvPrFJo7bmPZNM7sIbB/KQYBB1r9dnV+UANXHiRS2G7acBDpueuPX6ki6wiG4v
 OlwfcWGWTk+6ci0271a/05B4rclZqM33rbRUGlheEpHrFPINXksaArdaY1Pl5FIu
 kuP6wg5lyF4G1QuFE68K8OidJticchzh116D6ccD9z3Z5s2KTg555Wp83lLLe+Zi
 2YtNYtEr1yiCUDO9OBaYTHzDK/Tfj5Xz2q1Bny6YAyN48NTiOoeK6R9ZsAyXLDK1
 Qn/rjHR31ZyrnZ7OZ7GQ/rqfyfZDD+/Fq9mDZ9+ScYe0QFpTwY4=
 =PiOt
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20200406' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic into next

- clk: meson-g12a: missing break
- sync all Amlogic DT from Linux v5.6-rc2
- MMC clock fixups
- add support for Libre Computer AML-S905D-PC and AML-S912-PC
2020-04-08 08:48:31 -04:00
Tom Rini
1f47e2aca4 Xilinx changes for v2020.07
common:
 - Align ENV_FAT_INTERFACE
 - Fix MAC address source print log
 - Improve based autodetection code
 
 xilinx:
 - Enable netconsole
 
 Microblaze:
 - Setup default ENV_OFFSET/ENV_SECT_SIZE
 
 Zynq:
 - Multiple DT updates/fixes
 - Use DEVICE_TREE environment variable for DTB selection
 - Switch to single zynq configuration
 - Enable NOR flash via DM
 - Minor SPL print removal
 - Enable i2c mux driver
 
 ZynqMP:
 - Print multiboot register
 - Enable cache commands in mini mtest
 - Multiple DT updates/fixes
 - Fix firmware probing when driver is not enabled
 - Specify 3rd backup RAM boot mode in SPL
 - Add SPL support for zcu102 v1.1 and zcu111 revA
 - Redesign debug uart enabling and psu_init delay
 - Enable full u-boot run from EL3
 - Enable u-boot.itb generation without ATF with U-Boot in EL3
 
 Versal:
 - Enable distro default
 - Enable others SPI flashes
 - Enable systems without DDR
 
 Drivers:
 - Gem:
   - Flush memory after freeing
   - Handle mdio bus separately
 - Watchdog:
   - Get rid of unused global data pointer
   - Enable window watchdog timer
 - Serial:
   - Change reinitialization logic in zynq serial driver
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXoxw9wAKCRDKSWXLKUoM
 IbQxAKCK23yTy4FoN8oTGTYsbmLOA9kVUQCbBx8lg4nBeA8ihSaAnY+HMDF37YI=
 =Lg54
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2020.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2020.07

common:
- Align ENV_FAT_INTERFACE
- Fix MAC address source print log
- Improve based autodetection code

xilinx:
- Enable netconsole

Microblaze:
- Setup default ENV_OFFSET/ENV_SECT_SIZE

Zynq:
- Multiple DT updates/fixes
- Use DEVICE_TREE environment variable for DTB selection
- Switch to single zynq configuration
- Enable NOR flash via DM
- Minor SPL print removal
- Enable i2c mux driver

ZynqMP:
- Print multiboot register
- Enable cache commands in mini mtest
- Multiple DT updates/fixes
- Fix firmware probing when driver is not enabled
- Specify 3rd backup RAM boot mode in SPL
- Add SPL support for zcu102 v1.1 and zcu111 revA
- Redesign debug uart enabling and psu_init delay
- Enable full u-boot run from EL3
- Enable u-boot.itb generation without ATF with U-Boot in EL3

Versal:
- Enable distro default
- Enable others SPI flashes
- Enable systems without DDR

Drivers:
- Gem:
  - Flush memory after freeing
  - Handle mdio bus separately
- Watchdog:
  - Get rid of unused global data pointer
  - Enable window watchdog timer
- Serial:
  - Change reinitialization logic in zynq serial driver

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-07 17:13:35 -04:00
Igor Opaniuk
eb719060ab ARM: dts: imx8qxp-colibri: dm-pre-proper for pd_dma nodes
pd_dma_* nodes should be accessible during pre-relocation stage of
U-Boot proper for properly handling power domains.

This fixes the issue with permanent failing of invocation of
power_domain_get_by_index() in the common code of DM power domain
uclass (drivers/power/domain/power-domain-uclass.c).

Fixes: f0cc4eae9a ("core: device: use dev_power_domain_on")
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-04-07 10:41:10 +02:00
Igor Opaniuk
8fe92b8045 ARM: dts: imx8qm-apalis: dm-pre-proper for pd_dma nodes
pd_dma_* nodes should be accessible during pre-relocation stage of
U-Boot proper for properly handling power domains.

This fixes the issue with permanent failing of invocation of
power_domain_get_by_index() in the common code of DM power domain
uclass (drivers/power/domain/power-domain-uclass.c).

Fixes: f0cc4eae9a ("core: device: use dev_power_domain_on")
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-04-07 10:41:07 +02:00
Igor Opaniuk
67c8e2826b ARM: dts: imx8qxp-colibri: replace dm-spl with dm-pre-proper
For non-SPL/TPL setups dm-spl, dm-tpl, dm-pre-proper, dm-pre-reloc are
handled equally, forcing the nodes with these properties
to be accessible and device being probed
before pre-relocation of U-Boot proper (drivers/core/util.c):

bool ofnode_pre_reloc(ofnode node)
{
    /* for SPL and TPL the remaining nodes after the fdtgrep 1st pass
     * had property dm-pre-reloc or u-boot,dm-spl/tpl.
     * They are removed in final dtb (fdtgrep 2nd pass)
     */
    return true;
    if (ofnode_read_bool(node, "u-boot,dm-pre-reloc"))
        return true;
    if (ofnode_read_bool(node, "u-boot,dm-pre-proper"))
        return true;

    /*
     * In regular builds individual spl and tpl handling both
     * count as handled pre-relocation for later second init.
     */
    if (ofnode_read_bool(node, "u-boot,dm-spl") ||
        ofnode_read_bool(node, "u-boot,dm-tpl"))
        return true;

    return false;
}

Howewer, to avoid confusion in future, replace dm-spl
`%s/dm-spl/dm-pre-proper/g` properties to dm-pre-proper
to explicitly state that they are handled during pre-relocation
stage of U-Boot proper.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-04-07 10:41:02 +02:00
Igor Opaniuk
99897dd80d ARM: dts: imx8qm-apalis: replace dm-spl with dm-pre-proper
For non-SPL/TPL setups dm-spl, dm-tpl, dm-pre-proper, dm-pre-reloc are
handled equally, forcing the nodes with these properties
to be accessible and device being probed
before pre-relocation of U-Boot proper (drivers/core/util.c):

bool ofnode_pre_reloc(ofnode node)
{
    /* for SPL and TPL the remaining nodes after the fdtgrep 1st pass
     * had property dm-pre-reloc or u-boot,dm-spl/tpl.
     * They are removed in final dtb (fdtgrep 2nd pass)
     */
    return true;
    if (ofnode_read_bool(node, "u-boot,dm-pre-reloc"))
        return true;
    if (ofnode_read_bool(node, "u-boot,dm-pre-proper"))
        return true;

    /*
     * In regular builds individual spl and tpl handling both
     * count as handled pre-relocation for later second init.
     */
    if (ofnode_read_bool(node, "u-boot,dm-spl") ||
        ofnode_read_bool(node, "u-boot,dm-tpl"))
        return true;

    return false;
}

Howewer, to avoid confusion in future, replace dm-spl
`%s/dm-spl/dm-pre-proper/g` properties to dm-pre-proper
to explicitly state that they are handled during pre-relocation
stage of U-Boot proper.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-04-07 10:40:56 +02:00
Michal Simek
47cc45a91c arm64: zynqmp Add support for zcu102 rev1.1
rev1.1 has different DDR sodimm module that's why it requires different DDR
configuration.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:52:45 +02:00
Michal Simek
f7375aff95 ARM: zynq: Enable DM for CFI NOR flash
With multi defconfig NOR flash information about NOR should be taken from
DT that's why there is no reason to specify address and sizes via fixed
config.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:52:45 +02:00
Michal Simek
7c49a6d08e ARM: zynq: Do not include full zynq-7000.dtsi to cse-nor configuration
There is no real need to include full DT when only some nodes are enough to
use. It will save some space.

Retested with FSBL for initial SoC setup. SPL didn't work.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:31 +02:00
Michal Simek
f5a122e2ab ARM: zynq: Change zc770 xm011 Nand x16 configurations
Instead of symlink include origin file and just change model description.
Difference is not in DT but in ps7_init configurations which is taken based
on device tree name that's why the same DT can't be used.

Also update model and update comments to match configurations.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:31 +02:00
Michal Simek
00fb945cf5 arm64: zynqmp: Move pinctrl node under firmware node
Pinctrl is handled via firmare interface that's why move it there without
reg property and new compatible string.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:31 +02:00
Michal Simek
ba19690287 arm64: zynqmp: Fix GIC compatible property
dtbs_check is showing warning around GIC compatible property as
interrupt-controller@f9010000: compatible: ['arm,gic-400', 'arm,cortex-a15-gic']
is not valid under any of the given schemas

Similar change has been done also by Linux kernel commit 5400cdc1410b
("ARM: dts: sunxi: Fix GIC compatible")

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:31 +02:00
Michal Simek
0ac6500737 ARM: zynq: Fix addresses in partition definitions
Node name should be <name>@<address> which is not how partitions are
described.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:31 +02:00
Michal Simek
5df63a60aa arm64: zynqmp: Fix addresses in partition definitions
Node name should be <name>@<address> which is not how partitions are
described.

Issue was found by running dtbs_check as:
flash@0: 'partition@qspi-device-tree', 'partition@qspi-fsbl-uboot',
'partition@qspi-linux', 'partition@qspi-rootfs'
do not match any of the regexes: ...

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:31 +02:00
Michal Simek
04437dea7c arm64: zynqmp: Sync DP subsystem
Sync DP subsystem with the latest state in Xilinx U-Boot repository.
This binding hasn't been approved in mainline Linux but it is much better
than ancient version which this patch removes.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:31 +02:00
Amit Kumar Mahapatra
0546b1ab06 arm64: zynqmp: Do not duplicate flash partition label property
In kernel 5.4, support has been added for reading MTD devices via
the nvmem API.
For this the mtd devices are registered as read-only NVMEM providers
under sysfs with the same name as the flash partition label property.

So if flash partition label property of multiple flash devices are identical
then the second mtd device fails to get registered as a NVMEM provider.

This patch fixes the issue by having different label property for different
flashes.

Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:31 +02:00
Ashok Reddy Soma
d9872d8b47 arm64: dts: zynqmp: Add clk cells for sdhci
Add clock-cells and clock-output-names for sdhci0 and sdhci1.
These are needed for linux sdhci driver from 5.4 version onwards.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:31 +02:00
Michal Simek
87b0176fbf arm64: zynqmp: Remove second copy of reset-controller
Reset controller is handled via firmware that's why it should be the part
of firmware node. Origin solution hasn't been removed when above change was
applied by commit b07e97b4ba ("arm64: zynqmp: Use reset header in
zynqmp.dtsi").

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:31 +02:00
Manish Narani
12ffe75819 arm64: zynqmp: Add 'no-1-8-v' property for ZynqMP Boards
Modify dts files to add 'no-1-8-v' property for all the ZynqMP boards.
User can remove this property to enable the UHS mode. This is to keep
the same speed (HS) modes across all the stages of the Linux Boot. Due
to power cycling limitation of some of the ZynqMP boards, some SD cards
don't get power cycled and are failing in Linux.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
2020-04-06 12:51:31 +02:00
Nava kishore Manne
21620990cf arm64: zynqmp: Sync zynqmp fpga manager with mainline
Sync zynqmp fpga manager with mainline.

Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:31 +02:00
Michal Simek
39419c21bf arm64: zynqmp: Remove unused zynqmp-clk.dtsi
All boards have been converted to firmware based driver that's why we can
remove this file now.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:31 +02:00
Michal Simek
d4fb2d1145 ARM: zynq: Fix spi name node
None name address should be aligned with address. DTC 1.5.1 is reporting
issues related to that.

arch/arm/boot/dts/zynq-zc770-xm010.dts:106.10-119.4: Warning
 (spi_bus_reg): /amba/spi@e0007000/flash@0: SPI bus unit address format
 error, expected "1"
arch/arm/boot/dts/zynq-zc770-xm013.dts:101.19-109.4: Warning
(spi_bus_reg): /amba/spi@e0006000/eeprom@0: SPI bus unit address format
 error, expected "2"

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:31 +02:00
Michal Simek
d31f1c9236 arm64: zynqmp: Update Copyright years to 2020
Trivial change.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:31 +02:00
Michal Simek
f695e1c889 arm64: zynqmp: Replace gpio-key,wakeup with wakeup source
The same change has been done for Zynq by commit 1241c72b6db1
("ARM: dts: zynq: replace gpio-key,wakeup with wakeup-source property")
in mainline Linux kernel.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:31 +02:00
Sudeep Holla
6bbe3e6c16 ARM: dts: zynq: replace gpio-key,wakeup with wakeup-source property
Most of the legacy "gpio-key,wakeup" boolean property is already
replaced with "wakeup-source". However few occurrences of old property
has popped up again, probably from the remnants in downstream trees.

Replace the legacy properties with the unified "wakeup-source"
property introduced in the Linux kernel commit 700a38b27eef
("Input: gpio_keys - switch to using generic device properties")

Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:30 +02:00
Quanyang Wang
0b792fd4f1 ARM: dts: zc702: Fix I2C bus warnings
The dtc has new checks for I2C and SPI buses.
Fix the warnings in node names and unit-addresses.

Warning from Linux kernel:
arch/arm/boot/dts/zynq-zc702.dts:187.13-190.6: Warning (i2c_bus_reg): /amba/i2c@e0004000/i2c-mux@74/i2c@7/hwmon@52: I2C bus unit address format error, expected "34"
arch/arm/boot/dts/zynq-zc702.dts:191.13-194.6: Warning (i2c_bus_reg): /amba/i2c@e0004000/i2c-mux@74/i2c@7/hwmon@53: I2C bus unit address format error, expected "35"
arch/arm/boot/dts/zynq-zc702.dts:195.13-198.6: Warning (i2c_bus_reg): /amba/i2c@e0004000/i2c-mux@74/i2c@7/hwmon@54: I2C bus unit address format error, expected "36"

Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06 12:51:30 +02:00
Jerome Brunet
e13e7c9dae arm64: dts: meson: add libretech-pc support
Add support for the Amlogic based libretech-pc platform.
This platform comes with 2 variant, based on the s905d or s912 SoC.

Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
[narmstrong: update board/amlogic/q200/MAINTAINERS]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-06 09:56:35 +02:00
Jerome Brunet
74f50b79e3 arm64: dts: meson: import libretech-pc from linux v5.6-rc2
Sync the libretech-pc device tree from Linux v5.6-rc2
11a48a5a18c6 ("Linux 5.6-rc2")

Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-06 09:56:35 +02:00
Jerome Brunet
dd5f2351e9 arm64: dts: meson: sync dt and bindings from v5.6-rc2
Sync the device tree and dt-bindings from Linux v5.6-rc2
11a48a5a18c6 ("Linux 5.6-rc2")

The only exception to this is the mmc pinctrl pin bias of gxl SoC family.
This is a fix which found its way to u-boot but not Linux yet.

Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-06 09:56:35 +02:00
Marek Vasut
a667cd8dd3 ARM: dts: stm32: Temporarily drop cd-gpios from AV96 DT
The card-detect GPIO and any other GPIO access currently doesn't work in
U-Boot SPL on any STM32 platform and crashes the SPL. To work around this
problem on AV96 right before release, remove the cd-gpios from DT. This
patch must be reverted right after release, once the proper fix for the
GPIO driver, "gpio: stm32: support gpio ops in SPL", is applied.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Tom Rini <trini@konsulko.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2020-04-05 19:07:13 -04:00
Tom Warren
7c02bc9649 ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support
The Jetson Nano Developer Kit is a Tegra X1-based development board. It
is similar to Jetson TX1 but it is not pin compatible. It features 4GB
of LPDDR4, a SPI NOR flash for early boot firmware and an SD card slot
used for storage.

HDMI 2.0 or DP 1.2 are available for display, four USB ports (3 USB 2.0
and 1 USB 3.0) can be used to attach a variety of peripherals and a PCI
Ethernet controller provides onboard network connectivity. NVMe support
has also been added. Env save is at the end of QSPI (4MB-8K).

A 40-pin header on the board can be used to extend the capabilities and
exposed interfaces of the Jetson Nano.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
2020-04-02 14:30:02 -07:00
Stephen Warren
9eb15cbe5c ARM: tegra: p2371-2180: add I2C nodes to DT
This adds to the DT the I2C controllers that connect to the board ID EEPROM,
etc. With this change, you can now probe all I2C devices on a TX1 board.

Signed-off-by: Tom Warren <twarren@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2020-04-02 14:30:01 -07:00
Tom Rini
e88c9e6ff1 - Fix device tree of Avenger96 board from Arrow Electronics and add
compatibility with stm32mp15_dhcom_basic_defconfig
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE56Yx6b9SnloYCWtD4rK92eCqk3UFAl6EiK0ACgkQ4rK92eCq
 k3V6DggAhU7jE5MGs9A7En+YpANXbJ4tl56IZIjdzPzEjA2G3yuBv/DLci/w27aF
 eaP83ayI/ZrVtevEBFomP0JRrzQc9r/ot+USVugGsoAigLbzJc5uba42FGn09Olh
 uKkst0Fb7uPRzZQNwRc7hTKVSLvT11c0oPQyhhJM2djPDTETDry+RPnEFQ41SEUt
 bNILmj0VRzikzbe5RXFWWYMUWBrt22pG2LLhog+WSRSpqrWM2zES64NnwAXxD/mR
 YIQFZIZ6eWW2Otp+qzenkg5ZWIMVWRyUBAP5e0auKRE8TGWAXgBcoFRTRLf7oA/P
 yr3TTBMWiPdqdXNe3MYzAiTpm7jrtg==
 =RALH
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20200401' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm

- Fix device tree of Avenger96 board from Arrow Electronics and add
  compatibility with stm32mp15_dhcom_basic_defconfig
2020-04-01 09:47:30 -04:00
Marek Vasut
2f3c4b8a0f ARM: dts: stm32: Repair PMIC configuration on AV96
The core and vdd PMIC buck regulators were misconfigured, which caused
instability of the board and malfunction of high-speed interfaces, like
the RGMII. Configure the PMIC correctly to repair these problems. Also,
model the missing Enpirion EP53A8LQI on the DHCOR SoM as a fixed regulator.

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
2020-04-01 11:58:00 +02:00
Marek Vasut
4c8e4c6152 ARM: dts: stm32: Add missing ethernet PHY reset on AV96
Add PHY reset GPIO on AV96 ethernet PHY.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
2020-04-01 11:58:00 +02:00
Marek Vasut
6bb45d08cb ARM: dts: stm32: Repair ethernet operation on AV96
The AV96 RGMII uses different pinmux for ETH_RGMII_TXD0, ETH_RGMII_RXD2
and ETH_RGMII_TX_CTL. Use the correct pinmux to make ethernet operational.

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
2020-04-01 11:58:00 +02:00
Marek Vasut
955de51111 ARM: dts: stm32: Add alternate pinmux for ethernet RGMII
Add another mux option for DWMAC RGMII, this is used on AV96 board.

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
2020-04-01 11:58:00 +02:00
Marek Vasut
e182dcaa1b ARM: dts: stm32: Add configuration EEPROM on AV96
The board has an EEPROM on the same I2C bus as PMIC, at address 0x53.
The EEPROM contains the board MAC address.

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Change-Id: I340a0675c11e4599968b2e3ef0515fb8da8d7b42
2020-04-01 11:58:00 +02:00
Marek Vasut
f19312e5f4 ARM: dts: stm32: Use DT alias for the configuration EEPROM
Use DT /aliases node to establish a stable phandle to the configuration
EEPROM. This permits the configuration EEPROM to be moved e.g. to a
different address or a different bus. Adjust the board code to handle
new phandle lookup.

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
2020-04-01 11:58:00 +02:00
Marek Vasut
2f0b5d930d ARM: dts: stm32: Add QSPI NOR on AV96
The DH Electronics DHCOR SOM has QSPI NOR on the SoM itself, add it
into the DT.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Change-Id: Ia7c454c496f50e3fc4851ec1154f3641c416e98e
2020-04-01 11:57:31 +02:00
Marek Vasut
df7f49ca27 ARM: dts: stm32: Repair SDMMC2 operation
The eMMC uses different pinmux for the top four data lines, use such
a pinmux, otherwise it takes a very long time until the test for 8bit
operation times out. And this is the correct pinmux per schematic too.

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
2020-04-01 10:12:44 +02:00
Marek Vasut
5fdcba6402 ARM: dts: stm32: Add alternate pinmux for SDMMC2 pins 4-7
Add another mux option for SDMMC2 pins 4..7, this is used on AV96 board.

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
2020-04-01 10:12:44 +02:00
Marek Vasut
45fa59b407 ARM: dts: stm32: Repair SDMMC1 operation on AV96
The SD uses different pinmux for the D123DIRline, use such a pinmux,
otherwise there is a pinmux collision on the AV96. Add missing SD
voltage regulator switch and enable SDR104 operation.

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
2020-04-01 10:12:44 +02:00
Marek Vasut
4fdbe6487d ARM: dts: stm32: Add alternate pinmux for SDMMC1 direction pins
Add another mux option for SDMMC1 direction pins, in particular
SDMMC1_D123DIR, this is used on AV96 board.

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
2020-04-01 10:12:44 +02:00
Marek Vasut
81169ca3cc ARM: dts: stm32: Repair SD1 pre-reloc pinmux DT node on AV96
The sdmmc1_dir_pins_a: sdmmc1-dir-0 layout changed in commit 35a54d41d9
("ARM: dts: stm32mp1: sync device tree with v5.2-rc4") such that pins{};
became pins1{};pins2{};, however the SPL extras were not updated to reflect
that change. Fix this.

This fixes booting from SD1 X9 slot on the AV96 board.

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Fixes: 35a54d41d9 ("ARM: dts: stm32mp1: sync device tree with v5.2-rc4")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
2020-04-01 10:12:44 +02:00
Tom Rini
2b18b89156 Merge branch 'next' of git://git.denx.de/u-boot-usb into next 2020-03-31 17:24:19 -04:00
Tom Rini
d1048a60cf Merge branch 'master' of git://git.denx.de/u-boot-socfpga 2020-03-31 10:05:25 -04:00
Tom Rini
962bb2e31b Merge branch 'master' of git://git.denx.de/u-boot-sh
- Fixes for Gen 2 V2H Blanche
2020-03-31 10:04:39 -04:00
Ley Foon Tan
df8e15af2b arm: dts: agilex: Enable QSPI
Enable QSPI for Agilex SoC devkit.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-03-31 02:52:38 +02:00
Kuldeep Singh
3ec7900b23 arm: dts: ls1028a: Use flexspi in octal I/O mode
Configure RX and TX bus-width values to use flexspi in octal I/O mode.
If bus-widths are not specified, then single I/O mode is set by default.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30 08:12:13 +05:30
Kuldeep Singh
bd294e43dc arm: dts: lx2160a: Use flexspi in octal I/O mode
Configure RX and TX bus-width values to use flexspi in octal I/O mode.
If bus-widths are not specified, then single I/O mode is set by default.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30 08:12:13 +05:30
Kuldeep Singh
4c1a52294f arm: dts: lx2160aqds: Add FSPI node properties
lx2160a-qds has 2 micron "mt35xu512aba" flashes of size 64M each
connected on A0 and B1 i.e on CS0 and CS3. Since flashes are connected
on different buses, only one flash can be probed at a time.

Add fspi node properties aligned with LX2160A-RDB fspi properties.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30 08:12:13 +05:30
Biwen Li
bb1165f900 dm: arm64: ls1046a: add i2c DM support
This supports i2c DM and enables CONFIG_DM_I2C
for SoC LS1046A

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-03-30 08:12:13 +05:30
Marek Vasut
9cf09c799a ARM: dts: rmobile: Enable IIC3 on V2H Blanche
Enable IIC3 to permit access to the PMIC.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-03-30 03:49:23 +02:00
Marek Vasut
fd2657314f ARM: dts: rmobile: Add IIC3 node on Gen2 R8A7792 V2H
Add IIC3 node from mainline Linux DT. This will be further updated in
subsequent DT sync, however adding this node for now is sufficient and
minimal change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-03-30 03:49:23 +02:00
Otavio Salvador
99f946976e rv1108: Fix boot regression
Since commit 79030a4861 ("rockchip: Add Single boot image
(with binman, pad_cat)") the following boot regression is seen:

U-Boot 2020.04-rc3-00050-gd16e18ca6c-dirty (Mar 09 2020 - 11:40:07 -0300)

Model: Elgin RV1108 R1 board
DRAM:  128 MiB
initcall sequence 67fd12a0 failed at call 6000b927 (err=-22)

This happens because the above commit missed to include the
"rockchip-u-boot.dtsi" for rv1108, so include this file
like it done for other Rockchip SoC dtsi's.

Fixes: 79030a4861 ("rockchip: Add Single boot image (with binman, pad_cat)")
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-03-26 22:58:46 +08:00
Otavio Salvador
af84b3327a ARM: dts: Activate pullups in the console pins on rv1108-elgin-r1
In order to make the console pins more robust to noise, activate
the pullups and increase its drive strength.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-03-26 22:58:46 +08:00
Patrick Delaunay
9368bdfebd ram: stm32mp1: the property st, phy-cal becomes optional
This parameter "st,phy-cal" becomes optional and when it is
absent the built-in PHY calibration is done.

It is the case in the helper dtsi file "stm32mp15-ddr.dtsi"
except if DDR_PHY_CAL_SKIP is defined.

This patch also impact the ddr interactive mode
- the registers of the param 'phy.cal' are initialized to 0 when
  "st,phy-cal" is not present in device tree (default behavior when
  DDR_PHY_CAL_SKIP is not activated)
- the info 'cal' field can be use to change the calibration behavior
  - cal=1 => use param phy.cal to initialize the PHY, built-in training
             is skipped
  - cal=0 => param phy.cal is absent, built-in training is used (default)

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24 14:23:30 +01:00
Patrick Delaunay
1a4f57c895 ARM: dts: stm32mp1: DT alignment with Linux 5.6-rc1
This commit manages diversity for STM32M15x SOCs with:
- dedicated files to support all STM32MP15 SOCs family.
  The differences between those SOCs are:
  -STM32MP151 [1]: common file.
  -STM32MP153 [2]: STM32MP151 + CANs + a second CortexA7-CPU.
  -STM32MP157 [3]: STM32MP153 + DSI + GPU.
- new files to manage security diversity on STM32MP15x SOCs.
  On STM32MP15xY, "Y" gives information:
  -Y = A means no cryp IP and no secure boot.
  -Y = C means cryp IP + secure boot.
- stm32mp157 pinctrl files to better manage package diversity.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24 14:18:36 +01:00
Tom Rini
2738f0edea Merge tag 'ti-v2020.07-next' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti into next
K3 J721E:
* OSPI boot support
* Support for loading remote cores in R5 SPL
* PMIC ESM Support
* Minor fixes for R5F and C7x remoteproc drivers

K3 AM654:
* Update AVS class 0 voltages.
* Add I2C nodes

DRA7xx/AM57xx:
* Fixed Android boot on AM57xx

AM33/AM43/Davinci:
* switch to driver model for the net and mdio driver for baltos
* Add DM/DTS support for omap video driver
* Enable fastboot on am335x-evm
2020-03-17 11:59:58 -04:00
Tom Rini
36bdcf7f3b Merge tag 'mmc-2020-3-9' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmc
- DM support for CAxxxx SoCs
- eMMC board for presidio-asic
- Add defer probe for mmc sdhci
- TI SoCs mmc misc update
2020-03-10 21:13:26 -04:00
Alifer Moraes
a604b67b87 arm: dts: imx8mq-evk: add phy-reset-gpios for fec1
Instead of resetting the ethernet phy through functions in imx8mq_evk.c, let the
driver reset the phy via dts description adding a reset duration of 10 ms
following atheros 8031's datasheet recommendation.

Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
2020-03-10 10:59:08 +01:00
Max Krummenacher
d40aa43f3f ARM: dts: imx8mm-verdin: drop rgmii_rxc_dly/txc_dly
The FEC in the i.MX8MM doesn't support this feature. So don't pretend one
can use it.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-03-09 15:06:47 +01:00
Igor Opaniuk
0c45a51970 ARM: dts: imx8mm-verdin: dm-spl for pinctrl_usdhc1 node
Let pinctrl configuration for eMMC node (usdhc1) also be
accessible in SPL.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-03-09 15:06:40 +01:00
Anatolij Gustschin
823c4cd749 imx: mx6ul_14x14_evk: configure for 24bpp display
Before DM_VIDEO conversion this board used 24bpp
display configuration, so use it again.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-03-09 15:05:03 +01:00
Fabio Estevam
a29d79da43 ARM: dts: imx6sx-sdb: Sync with kernel 5.4.16
Sync the imx6sx-sdb dts files with kernel 5.4.16.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-03-09 15:04:51 +01:00
Fabio Estevam
47c2eae1b8 ARM: dts: imx6sx: Sync with kernel 5.4.16
Sync the imx6sx dts files with kernel 5.4.16.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-03-09 15:04:42 +01:00
Faiz Abbas
0abf600746 arm: dts: k3-j721e-r5-common-proc-board: Use unique names for dummy clocks
Update the dummy clock names to use unique identifiers. Otherwise the
previous node just gets overwitten by the next one with the same name.
This fixes eMMC boot not working on J721e-evm.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-03-09 08:33:16 +08:00
Faiz Abbas
c7d106b4eb mmc: am654_sdhci: Update output tap delay writes
With the latest RIOT, there is a different otap delay value for each
speed mode. Add a new binding with every supported speed mode. Also
disable a given speed mode in the host caps if its corresponding
otap-del-sel is not present.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-03-09 08:33:16 +08:00
Keerthy
6d310ba50c arm: dts: k3-j721e-r5-common-proc-board: Add ospi1 flash node
Add ospi1 flash node required for QSPI boot.

Signed-off-by: Keerthy <j-keerthy@ti.com>
2020-03-06 12:53:00 +05:30
Keerthy
769c94263f arm: dts: k3-j721e-mcu-wakeup: Add assigned-clocks/rates properties for ospi1/qspi
Add assigned-clocks/rates properties for ospi1/qspi.
This is the expected rate as per ROM configuration.

Signed-off-by: Keerthy <j-keerthy@ti.com>
2020-03-06 12:53:00 +05:30
Keerthy
896cf0e20a arm: dts: k3-j721e: Enable ospi1/qspi
Enable the ospi1/qspi for both r5 and a72 configurations.

Signed-off-by: Keerthy <j-keerthy@ti.com>
2020-03-06 12:53:00 +05:30
Tom Rini
c12ee850d6 Merge branch 'master' of git://git.denx.de/u-boot-socfpga
- ABB SECU board
- Assorted minor fixes
2020-03-04 10:41:41 -05:00
Holger Brunck
468ba8d00b ARM: socfpga: Add initial support for the ABB SECU board
Add initial support for the ABB SECU board, which is an ArriaV-based
SoCFPGA system with ethernet and booting from Denali NAND.

Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-03-03 22:11:36 +01:00
Vignesh Raghavendra
360c86b162 arm: dts: k3-am654-base-board: Enable I2C nodes
Add DT nodes for main domain I2Cs and its slave devices

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-03-03 13:08:14 +05:30
Dario Binacchi
72e0a0e1c7 arm: dts: am335x: add 'u-boot, dm-pre-reloc' to panel
Add the "u-boot,dm-pre-reloc" property to the "ti,tilcdc,panel"
compatible node. In this way the video-uclass module can allocate the
amount of memory needed to be assigned to the frame buffer.
For boards that support Linux the property is added to the *-u-boot.dtsi
file since it is a u-boot specific dt flag.

Ran building tests with CONFIG_AM335X_LCD enabled and disabled for the
following configurations:
 - brxre1_defconfig           --> success
 - am335x_guardian_defconfig  --> success
 - am335x_evm_defconfig       --> success
 - da850evm_defconfig         --> failure with CONFIG_AM335X_LCD enabled

Enabling CONFIG_AM335X_LCD in da850evm_defconfig causes building errors
even without applying the patch. The driver has never been enabled on the
da850 and must be adapted for this platform.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Tested-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Felix Brack <fb@ltec.ch>
2020-03-03 13:08:14 +05:30
Tero Kristo
91600a6a84 arm: dts: k3-j721e: Add ESM PMIC support for tps659413 based board
The ESM handling on J7 processor board requires routing the
MCU_SAFETY_ERROR signal to the PMIC on the board for critical safety
error handling. The PMIC itself should then reset the board based on
receiving it. Enable the support for the board by adding the esm
node in place.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-03-03 13:08:14 +05:30
Tero Kristo
7304546071 arm: dts: k3-k721e: Add Main domain ESM support
Main domain ESM support is needed to configure main domain watchdogs
to generate ESM pin events by default. On J7 processor board these
propagate to the PMIC to generate a reset when watchdog expires.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-03-03 13:08:14 +05:30
Keerthy
2984b82b3b arm: dts: k3-j721e-r5: Enable r5fss0 cluster in SPL
Enable MAIN domain r5fss0 cluster and its core0 in R5 spl.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-03-03 13:08:14 +05:30
Keerthy
b14d56f284 arm: dts: k3-j721e-r5-u-boot: Add fs_loader node
Add fs_loader node which will be needed for loading firmwares
from the boot media/filesystem.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-03-03 13:08:14 +05:30
Vignesh Raghavendra
224d7fe263 ARM: dts: k3-j721e: Add OSPI DT nodes
Add OSPI DT nodes to enable OSPI at U-Boot prompt and also to support
OSPI boot.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-03-03 13:08:13 +05:30
Vignesh Raghavendra
9e9dfc1fc4 ARM: dts: k3-am65: Add OSPI DT nodes
Add OSPI DT nodes to enable OSPI at U-Boot prompt and also to support
OSPI boot.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-03-03 13:08:13 +05:30
Masahiro Yamada
53265152d2 ARM: dts: uniphier: remove U-Boot own EEPROM compatible and property
The compatible string "i2c-eeprom" is U-Boot own compatible, which
has never been approved by the DT community. "u-boot,i2c-offset-len"
is also a U-Boot own hack.

Linux adds "atmel,*" as generic compatibles, and U-Boot also followed
it by commit d7e28918aa ("i2c_eeprom: Add reading support").

The U-Boot own hack is no longer needed. Just sync with Linux.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-29 14:12:51 +09:00
Masahiro Yamada
5ad159623f ARM: dts: uniphier: add reset-names to NAND controller node
Import Linux commits:

37f3e0096f71 ("ARM: dts: uniphier: add reset-names to NAND controller node")
e98d5023fe1f ("arm64: dts: uniphier: add reset-names to NAND controller node")

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-29 14:11:36 +09:00
Masahiro Yamada
44ebaa8e13 ARM: dts: uniphier: rename DT nodes to follow json-schema
Import the nodename changes I made in Linux for avoiding dt-schama
warnings. This follows the $nodename patterns in the dt-schema.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-29 14:10:54 +09:00
Jagan Teki
8040d8e00f ARM: dts: rockchip: Sync rk3288-vyasa dts from linux
Sync rk3288-vyasa dts file from Linux.

This sync has changes required to work HDMI output on
Vyasa RK3288 board.

This sync excludes the io_domains node since it is not
available in rk3288.dtsi.

Changes like vcc50_hdmi, vdd10_lcd and ddc-i2c-bus are
not merged to Linux yet but wil resync later if any
further updates on this.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19 16:45:38 +08:00
Heiko Stuebner
ac3d121c35 rockchip: px30: sync the main px30 dtsi from mainline
There have been multiple peripherals added to the main px30 dtsi
in the Linux kernel since its addition to u-boot. So to make it easier
to sync board devicetrees, update the core dtsi from Linux.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19 16:45:38 +08:00
Peter Robinson
ab800e5a6f arm: dts: rockchip: puma: move U-Boot specific bits to u-boot.dtsi
Move the U-Boot specific bits to a -u-boot.dtsi include so all the
u-boot.dtsi hierarchy is included.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19 16:45:38 +08:00
Peter Robinson
5532e3bb24 arm: dts: rockchip: rk3399: Move U-Boot specific bits to rk3399-u-boot
There's some bits in the U-Boot rk3399.dtsi that aren't yet in the
upstream Linux dtsi but are needed for early boot. This moves them
to the u-boot.dtsi to make it easier to sync the rest of rk3399.dtsi
with upstream.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19 16:45:38 +08:00
Peter Robinson
4d08de5840 arm: dts: rockchip: Update EVB/Puma devices to upstream USB/dwc3 conventions
The upstream linux kernel for the Rockchip 3399 SoC use usbdrd3 naming so move
the two remaining devices over to that for their device trees to make it
easier to sync with upstream DTs.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19 16:45:38 +08:00
Tom Rini
f2a73d6867 - add DH Electronics DHCOM SoM and PDK2 board
- DT alignment with kernel v5.5-rc7 for stm32mp1 boards
 - fix STM32 image format for big endian hosts in mkimage
 - solve warnings in device tree and code for stm32mp1 boards
 - remove fdt_high and initrd_high for stm32 and stih boards
 - add support of STM32MP15x Rev.Z
 - update stm32mp1 readme
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE56Yx6b9SnloYCWtD4rK92eCqk3UFAl5GcB0ACgkQ4rK92eCq
 k3Wr9gf/dDPJi6UBhLDio/IVKDBddOEUN0Lwdr9W0upL+DrdvEOyNyMSEKuLccIE
 UTd1NmNNwcvgDRaPvB5o3R7twWItTW0cYlmVkFSZ228aq6xdf/SElN2OUD6B9Gh+
 8bi6oVLu41TNMYn4VYxsEftcT2megfH8s+SH/FlvR5ua1yCC1vyrytEQjPIbJAB2
 sa90ewDyp5EYqGLdAk6AVjPLeNZsaleGwuyLf04PoC2xhn+3HTEKJCJN4O46aJUr
 0GUI7YN7pTjIfZdYfFqjcwoQV1xV2HtbjCTcOb8Td8TEYjIoILF8tSyfIwDXWGB5
 zMQIQxUdQyNiqdBPFcnkAufjk+zLIQ==
 =0dG+
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20200214' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm

- add DH Electronics DHCOM SoM and PDK2 board
- DT alignment with kernel v5.5-rc7 for stm32mp1 boards
- fix STM32 image format for big endian hosts in mkimage
- solve warnings in device tree and code for stm32mp1 boards
- remove fdt_high and initrd_high for stm32 and stih boards
- add support of STM32MP15x Rev.Z
- update stm32mp1 readme
2020-02-14 07:31:47 -05:00
Patrick Delaunay
8d93a9755f ARM: dts: stm32m1: add reg for pll nodes
Fix the following DT dtc warnings for stm32mp1 boards:

Warning (unit_address_vs_reg): /soc/rcc@50000000/st,pll@0:
  node has a unit name, but no reg property
Warning (unit_address_vs_reg): /soc/rcc@50000000/st,pll@1:
  node has a unit name, but no reg property
Warning (unit_address_vs_reg): /soc/rcc@50000000/st,pll@2:
  node has a unit name, but no reg property
Warning (unit_address_vs_reg): /soc/rcc@50000000/st,pll@3:
  node has a unit name, but no reg property

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-13 17:26:23 +01:00
Patrick Delaunay
5c34684b13 ARM: dts: stm32mp1: correct ddr node
This patch fix the warning:
dt.dts: Warning (simple_bus_reg): Node /soc/ddr@5A003000
simple-bus unit address format error, expected "5a003000"

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-13 17:26:23 +01:00
Antonio Borneo
db0cd2d3bc ARM: dts: stm32mp1: move FDCAN to PLL4_R
LTDC modifies the clock frequency to adapt it to the display. Such
frequency change is not detected by the FDCAN driver that instead
cache the value at probe and pretend to use it later.

Keep the LTDC alone on PLL4_Q by moving the FDCAN to PLL4_R.

Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-13 17:26:22 +01:00
Patrick Delaunay
d35a5af321 ARM: dts: stm32mp1: DT alignment with kernel v5.5-rc7
Device tree and binding alignment with kernel v5.5-rc7

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-13 17:26:22 +01:00
Patrick Delaunay
7915b9914e stm32mp1: pwr: use the last binding for pwr
Update the driver to use the latest binding from kernel v5.5-rc1:
no more use syscon or regmap to access to pwr register and
only one pwr_regulators node with the compatibility "st,stm32mp1,pwr-reg"
is available.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-13 17:26:22 +01:00
Patrick Delaunay
4f28092783 ARM: dts: stm32mp1: DT alignment with kernel v5.4
Device tree and binding alignment with kernel v5.4

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-13 17:25:34 +01:00
Lokesh Vutla
fde109dc75 arm: dts: k3-j721e-r5-common-proc-board: Disable power-domains for mcu uart
mcu uart will be used during uart boot for loading sysfw.itb. Since
sysfw is not yet available during uart load, power-domain cannot be
enabled. We need to rely on ROM for doing that, so disable power-domains
and clocks for mcu uart. Also fix the mcu uart frequency.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-13 21:39:17 +05:30
Faiz Abbas
f9dd35330b arm: dts: am437x-gp-evm: Add some nodes to u-boot.dtsi
Add scm_conf syscon node and its parents as well as the ethernet phy
node to u-boot.dtsi. This enables ethernet boot.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-13 21:39:17 +05:30
Marek Vasut
199537309b ARM: dts: stm32: Add DH Electronics DHCOM SoM and PDK2 board
Add support for DH Electronics DHCOM SoM and PDK2 rev. 400 carrier
board. This is an SoM with STM32MP15xx and an evaluation kit. The
baseboard provides Ethernet, UART, USB, CAN and optional display.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-02-12 19:48:39 +01:00
Ian Ray
bd58b1a785 board: ge: bx50v3: override panel
Override the panel compatible string for LCD in U-Boot.

Include U-Boot device tree overrides in device-specific device trees so
that the panel compatible string is used.

Fixes: 8c26739859 ("board: ge: bx50v3: sync devicetrees from Linux")
Signed-off-by: Ian Ray <ian.ray@ge.com>
2020-02-09 21:47:20 +01:00
Ian Ray
9167c20692 board: ge: mx53ppd: enable DM_VIDEO
Enable DM_VIDEO for mx53ppd.
Enable DM_REGULATOR_FIXED and DM_PWM for the backlight.
Remove unused MX53PPD_LCD_POWER.
Remove old (incorrect) setup_iomux_lcd.
Enable backlight via display enable handler.
Use cls command to initiate display in HW agnostic manner.
Modify `failbootcmd' to use lcdputs.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-02-09 21:47:20 +01:00
Robert Beckett
1d06dc6d16 board: ge: mx53ppd: add i2c eeprom bootcount storage
Add bootcount node, linking to i2c eeprom "bootcount" partitions for
storage.
Enable i2c eeprom bootcount backend storage.
Enable bootcount command and use it for failbootcmd.

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-02-09 21:47:20 +01:00
Robert Beckett
41613a7a58 board: ge: bx50v3: add i2c eeprom bootcount storage
Add bootcount node, linking to i2c eeprom "bootcount" partitions for
storage.
Enable i2c eeprom bootcount backend storage.
Enable bootcount command and use it for failbootcmd.

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-02-09 21:47:20 +01:00
Robert Beckett
1dec7fa797 board: ge: bx50v3, imx53ppd: use DM I2C
Remove old (pre-DM) i2c setup code.
Enable DM i2c.
Convert common code to use DM rtc.
Convert common code to read VPD from eeprom partition.
Convert the generic i2c PMIC init code to use the new da9063 driver.

mx53ppd only:
Correct RTC compatible in device tree.
Enable MXC DM i2c driver.
Define CONFIG_SYS_MALLOC_F_LEN so that DM is available in pre-reloc.
Make GPIO banks available during preloc, since initialisation is done
in board_early_init_f().
Add gpio_request() calls to satisfy the DM_GPIO compatibility API.
Remove unused power configuration.

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Signed-off-by: Ian Ray <ian.ray@ge.com>
2020-02-09 21:47:20 +01:00
Robert Beckett
b64088c5c2 board: ge: bx50v3, imx53ppd: add eeprom partitions
Add eeprom partitions to device tree.

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-02-09 21:47:20 +01:00
Joris Offouga
41fe56e3ad mx7dsabre: Fix usbtog probe when use dfu or ums
Before:
=> ums 0 mmc 0
UMS: LUN 0, dev 0, hwpart 0, sector 0x0, count 0x1dacc00
usb dr_mode not found
CTRL+C - Operation aborted
=> dfu 0 mmc 0
usb dr_mode not found

After :
=> ums 0 mmc 0
UMS: LUN 0, dev 0, hwpart 0, sector 0x0, count 0x1dacc00
=> dfu 0 mmc 0

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-02-09 14:59:54 +01:00
Joris Offouga
b3ebcc7687 arm: dts: imx7s-warp7: Move u-boot specific node in u-boot.dtsi
These nodes are not in upstream kernel, so move these in u-boot.dtsi

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-02-09 14:59:54 +01:00
Lukasz Majewski
a05eb8b14a arm: xea: dts: Add 'fec-3v3' regulator properties to prevent accidental disablement
The 'enable-active-high' DTS property configures GPIO so it is active with
HIGH state (by default it is low).

The 'regulator-boot-on' property indicates that the regulator was enabled
in the 'earlier' stage - i.e. bootloader/firmware.
In the XEA case the 'fec-3v3' was configured (as a "wrapper" on GPIO0_0) in
very early SPL code, so it shouldn't be modified at latter stages.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2020-02-09 14:59:16 +01:00
Igor Opaniuk
14d5aeff77 board: toradex: Add Verdin iMX8M Mini support
This adds initial minimal support for the Toradex Verdin iMX8M Mini Quad
2GB WB IT V1.0A module. They are now strapped to boot from eFuses which
are factory fused to properly boot from their on-module eMMC. U-Boot
supports booting from the on-module eMMC only, SDP support is disabled
for now due to missing i.MX 8M Mini USB support.

Functionality wise the following is known to be working:
- eMMC, 8-bit and 4-bit MMC/SD card slots
- Ethernet
- GPIOs
- I2C

Boot sequence is:
SPL ---> ATF (TF-A) ---> U-boot proper

ATF, U-boot proper and u-boot.dtb images are packed into a FIT image,
loaded by SPL.

Boot:
U-Boot SPL 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100)
Normal Boot
Trying to boot from MMC1
NOTICE:  Configuring TZASC380
NOTICE:  RDC off
NOTICE:  BL31: v2.0(release):rel_imx_4.14.98_2.3.0-0-g09c5cc994-dirty
NOTICE:  BL31: Built : 01:11:41, Jan 25 2020
NOTICE:  sip svc init

U-Boot 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100)

CPU:   Freescale i.MX8MMQ rev1.0 at 0 MHz
Reset cause: POR
DRAM:  2 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial
Out:   serial
Err:   serial
Model: Toradex Verdin iMX8M Mini Quad 2GB Wi-Fi / BT IT V1.0A, Serial#
 06535149
Net:   eth0: ethernet@30be0000
Hit any key to stop autoboot:  0
Verdin iMX8MM #

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-02-09 14:50:52 +01:00
Marcel Ziswiler
1c12b67023 arm: dts: imx8mm-pinfunc: sync latest linux-next pin func header
Synchronise with latest linux-next kernel pin func header file.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-02-09 14:50:52 +01:00
Alex Nemirovsky
7d706a886f board: presidio-asic: Add basic G3 engr. development board support
Add basic Presidio G3 engineering board support

Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
2020-02-07 16:16:01 -05:00
MarkLee
6efa450565 arm: dts: mediatek: add ethernet and sgmii dts node for mt7622
This patch add eth and sgmii dts node for mt7622 to support ethernet

Signed-off-by: MarkLee <Mark-MC.Lee@mediatek.com>
2020-02-07 13:59:58 -05:00
Tom Rini
457faef262 Merge branch 'master' of git://git.denx.de/u-boot-socfpga
- Gen 5 and Watchdog fixes
2020-02-06 23:18:42 -05:00
Tom Rini
f5cc89a82a Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- Bug fixes on ls1012a, ls1021a, ls1028ardb platforms Integrate fspi for
  ls1028a, add DM-I2C support, update secure boot header offset
2020-02-05 07:19:52 -05:00
Marek Vasut
cf8c836788 watchdog: designware: Convert to DM and DT probing
Convert the designware watchdog timer driver to DM and add DT probing
support. Perform minor coding style clean up, like drop superfluous
braces. These ought to be no functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dalon Westergreen <dwesterg@gmail.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Philipp Tomisch <philipp.tomisch@theobroma-systems.com>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Cc: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # roc-rk3399-pc
2020-02-05 03:01:57 +01:00
Kuldeep Singh
e5720648e6 arm: dts: lx2160a: Add FSPI node properties
Align flexspi node properties with linux device-tree properties
Tested on LX2160A-RDB

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04 16:19:37 +05:30
Kuldeep Singh
5e2fb3eaa0 arm: dts: ls1028a: Add FSPI node properties
Align flexspi node properties with linux device-tree properties
Tested on LS1028A-RDB

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04 16:19:37 +05:30
Michael Walle
3ffe090d4e arm: dts: ls1028a: fix interrupt properties
Sync the interrupt properties with the ones from Linux. Also use the
constants provided by the dt-bindings header. Please note, that there
are actual changes/fixes in the irq flags. U-Boot won't use the
interrupt properties anyway. It's just to be consistent with the Linux
device tree.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04 16:19:37 +05:30
Michael Walle
922ac0f661 arm: ls1028a: use the new flexspi driver
Also align the fspi node with the kernel one.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-04 16:19:37 +05:30
Faiz Abbas
16217edd03 arm: dts: k3-j721e-main: Add Support for gpio0
Add the main_gpio0 node.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04 09:07:24 +05:30
Vignesh Raghavendra
b6427783a8 arm: dts: k3-j721e-common-proc-board: Enable I2C expander for SPL
IO expanders are required to power cycle SD card. So enable the same

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04 09:07:24 +05:30
Vignesh Raghavendra
18402a104e arm: dts: k3-j721e-common-proc-board: Add I2C GPIO expander
Add I2C GPIO expander required to power cycle MMC/SD

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04 09:07:24 +05:30
Vignesh Raghavendra
01ec6a5ae1 arm: dts: k3-j721e: Add I2C nodes
J721e SoC has 2 I2C instances in MCU domain and 7 I2C instances in main
domain. Add DT nodes for the same

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04 09:07:24 +05:30
Vignesh Raghavendra
b070f58b44 arm: dts: k3-j721e-common-proc-board: Enable USB0 in peripheral mode
Enable USB0 in peripheral mode so that it be used for DFU

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04 09:07:24 +05:30
Kever Yang
a7eb9ae349 rockchip: rk3308: add alias for emmc/sdmmc
Add alias for mmc/sdmmc so that we can have a fix mmc number for emmc.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-30 11:44:02 +08:00
YouMin Chen
4082a68142 ram: rk3328: update lpddr3 setting
update lpddr3 setting for fix init fail about "col error".

Signed-off-by: YouMin Chen <cym@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-01-30 11:44:01 +08:00
YouMin Chen
c7df6483c2 ram: rk3328: add support ddr4 init
Add rk3328-sdram-ddr4-666.dtsi for support ddr4 init.

Signed-off-by: YouMin Chen <cym@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-01-30 11:44:01 +08:00
Jagan Teki
79030a4861 rockchip: Add Single boot image (with binman, pad_cat)
All rockchip platforms support TPL or SPL-based bootloader
in mainline with U-Boot proper as final stage. For each
stage we need to burn the image on to flash with respective
offsets.

This patch creates a single boot image component using
- binman, for arm32 rockchip platforms
- pad_cat, for arm64 rockchip platforms.

This would help users to get rid of burning different
boot stage images.

The new image called 'u-boot-rockchip.bin'
which can burn into flash like:

₹ sudo dd if=u-boot-rockchip.bin of=/dev/sda seek=64

This would support all rockchip platforms, except rk3128
since it doesn't support for SPL yet.

Cc: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Cc: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-01-30 11:44:01 +08:00
Jagan Teki
a1b75cf941 arm: dts: rk3188: Add rk3188-u-boot.dtsi
Add U-Boot specific dtsi file for rk3188 SoC. This
would help to add U-Boot specific dts nodes, properties
which are common across rk3188.

Right now, the file is empty, will add required changes
in future patches.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-01-30 11:44:01 +08:00
Jagan Teki
f48299a883 arm: dts: rk3036: Add rk3036-u-boot.dtsi
Add U-Boot specific dtsi file for rk3036 SoC. This
would help to add U-Boot specific dts nodes, properties
which are common across rk3036.

Right now, the file is empty, will add required changes
in future patches.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-01-30 11:44:01 +08:00
Jagan Teki
1c37f60c28 rockpro-rk3399: Enable SPI Flash
Enable winbond SPI flash for ROC-PC-RK3399 board.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-01-30 11:44:01 +08:00
Jagan Teki
3d11196c80 roc-pc-rk3399: Enable SPI Flash
Enable winbond SPI flash for ROC-PC-RK3399 board.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-01-30 11:44:01 +08:00
Jagan Teki
c8b1684a8c rockchip: dts: Sync ROC-RK3399-PC changes from Linux
Sync the ROC-RK3399-PC device tree changes from Linux
with below commit details:

commit <c36308abe4110e4db362d5e2ae3797834a7b1192> ("arm64: dts:
rockchip: Enable MTD Flash on rk3399-roc-pc")

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-01-30 11:44:01 +08:00
Tom Rini
3e12744a90 Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-samsung
- Various exynos fixes
2020-01-28 21:10:32 -05:00
Tom Rini
0b23b0d9f9 Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxi
- Libre Computer ALL-H3-IT/ALL-H5-CC board (Chen-Yu Tsai)
- Allwinner R40 Ethernet, usb phy enablement (Andre Przywara)
- Sunxi auto load from 128KB MMC offset (Andre Przywara)
- Orange Pi Win Ethernet phy enablement (Jernej Skrabec)
2020-01-26 12:05:11 -05:00
mingming lee
7d017d607e usb: musb-new: mt85xx: add musb-new gadget driver.
Using musb-new structure for mt85xx gadget driver.
Add gadget driver dts for mt8518 SoCs.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-25 12:04:36 -05:00
Andre Przywara
69d06935de sunxi: dts: R40: Update Bananapi M2 Berry .dts
Update the .dts file from the kernel, which carries much more nodes,
some of them we need to enable USB and Ethernet support for the board.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-24 23:06:50 +05:30
Chen-Yu Tsai
b5fe523bbc sunxi: H3/H5 Sync DT files from upstream Linux kernel as of next-20200108
Sync the device tree files and device tree header files from upstream
Linux kernel, as of 2020-01-08. The commit synced to in the sunxi repo

    98d25b0b266d Merge branch 'sunxi/dt-for-5.6' into sunxi/for-next

which is also part of next-20200108.

Changes brought in include:

  - cleanup of pinmux node names
  - addition of Security ID, MBUS, CSI, crypto engine, video codec,
    pmu, and thermal sensor device nodes for both SoCs
  - addition of deinterlacing engine device node on H3
  - cleanup of RTC device node and addition of its clocks
  - various board cleanups and improvements
    - removal of pinmux node for GPIO lines
    - cpufreq / DVFS
    - HDMI output
    - UART-based Bluetooth
    - audio codec
    - USB ports
  - new boards

Most of the changes don't concern U-boot.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-24 23:06:49 +05:30
Philippe Reynes
645b7ec52c bcm968360bg: add initial support
This add the initial support of the broadcom reference
board bcm968360bg with a bcm68360 SoC.

This board has 512 MB of RAM, 256 MB of flash (nand),
2 USB port, 1 UART, and 4 ethernet ports.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-01-23 07:29:58 -05:00
Philippe Reynes
6454e95f4f bcm68360: add initial support
This add the initial support of the broadcom bcm68360 SoC family.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-01-23 07:29:58 -05:00
Marek Szyprowski
da63b5da61 arm: dts: exynos: Use common alias for Odroid U3/X2 MMC2 (SD-card)
Use MMC0 for eMMC and MMC2 for SD-card as other Exynos-based boards do.
This allows to use common code to get MMC device id based on the XOM[7:5]
pins.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2020-01-23 11:43:10 +09:00
Marek Szyprowski
1bca28a5d9 arm: dts: exynos: Fix card-detect polarity for SD card on Odroid U3/X2
Card detect line for SD-card on Odroid U3/X2 boards are active low, so
add cd-inverted property to indicate this, as u-boot's GPIO driver doesn't
support specifying line polarity. This restores S5P_SDHCI driver operation
on Odroid U3/X2 boards.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2020-01-23 11:43:10 +09:00
Marek Szyprowski
a6ee3fe19d arm: dts: exynos: Extend board description
u-boot uses the same DTS for the all Odroid XU3-based boards, so list
them in the model description to let user know that those boards are
supported.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2020-01-23 11:41:49 +09:00
Stephan Gerhold
43d28855d8 board: Add new Samsung "stemmy" board based on ST-Ericsson U8500
The ST-Ericsson U8500 SoC has been used in mass-production for
some Android smartphones released around 2012.
In particular, Samsung has released more than 5 different
smartphones based on U8500, e.g.

  - Samsung Galaxy S III mini (GT-I8190) "golden"
  - Samsung Galaxy S Advance (GT-I9070)  "janice"
  - Samsung Galaxy Xcover 2 (GT-S7710)   "skomer"

and a few others.

Mainline Linux has great support for the Ux500 SoC, so these
smartphones can also run Linux mainline quite well.

Unfortunately, the original Samsung bootloader used on these devices
has limitations that prevent booting Linux mainline directly.
It keeps the L2 cache enabled, which causes Linux to crash very early,
shortly after decompressing the kernel.

Using U-Boot allows to circumvent these limitations. We can let the
Samsung bootloader chain-load U-Boot and U-Boot locks the L2 cache
before booting into Linux. U-Boot has several other advantages
- it supports device-trees directly and we are no longer limited to
flashing Android boot images through Samsung's proprietary download
mode.

The Samsung "stemmy" board covers all Samsung devices based on U8500.
Add minimal support for "stemmy". For now only UART is supported but
this will be extended later.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-22 17:47:57 -05:00
Stephan Gerhold
689088f9da arm: Add support for ST-Ericsson U8500 SoC
The NovaThor U8500 SoC was released by ST-Ericsson in 2011.
It was used for some development boards like the CALAO Systems
Snowball SBC, but mass production was primarily for Android
smartphones like the Samsung Galaxy S III mini.

Previous support for U8500 was removed in
commit 68282f55b8 ("arm: Remove unused ST-Ericsson u8500 arch")
since none of the boards were converted to generic boards
before the deadline.

The new code does not have much in common with the previous code.
I have completely rewritten everything, embracing the Driver Model
and device trees wherever possible.

The U8500 support is a bit more minimal for now - my primary
use case is to use U-Boot as alternative bootloader for some of the
U8500 Samsung smartphones. At the moment U-Boot is chain-loaded from
the original Samsung bootloader. A side effect of this is that we
can (temporarily) get away without implementing some functionality
- e.g. all clocks are already enabled by the original bootloader.

More functionality will be added in future patches.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: John Rigby <john.rigby@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-22 17:47:57 -05:00
Stephan Gerhold
f13dc8cbd9 arm: dts: Import device tree for ST-Ericsson Ux500
from https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git/
tag "ux500-armsoc-v5.6-2"
commit 224bf0fe7292 ("ARM: dts: ux500: samsung-golden: Add Bluetooth")

(queued for merge in Linux 5.6)

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-22 17:47:57 -05:00
Tom Rini
75dd53055a Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell
- Clearfog: Add run-time board detection with TLV EEPROM support
  (Baruch)
2020-01-21 18:10:28 -05:00
Baruch Siach
ae7ba525a5 ARM: mvebu: clearfog: add EEPROM devices
Add device-tree description for the EEPROM devices on Armada 388 SOM rev
2.1.

Another EEPROM is now on Clearfog Pro carrier rev 2.2, and Clearfog Base
rev 1.3.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-01-21 15:55:46 +01:00
Tom Rini
ad647690b1 ---------------------------------
imx8: cleanup, fix warnings
 imx6ull: add VisionSOM SoM and EVK
 mx7ulp: fix warning due network, cleanup
 mx7dsabre: Fix dm probe pmic
 imx6: fixed for vining2000
 
 Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/639512296
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl4m+D4PHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3hz0L/Rm48j733TNi7ZokndEr0+caMqk6PmJWE0Dy
 Uq4MwhhCkbPWP+uLQUY6yq64HXdx1fNaQnRzPiiaX2Ng9E/E9piOaYOKtKKs1j4q
 W+RiWfrGebgMemb8f2j4cot23KMUVk5/rv+EFn+oJkX7HD4ou/ikB4269/7b75Dg
 1HsrsjWQq7Wsi4baVZZcfs92xTXltpkGEzgKFURt1tqU1TT1I+PX92aM/Df+qUYu
 ++DQTMr0kZ/yMlzxTvUJYN0KRkMnn6W07X/qQyU1YwioQmC1ZJ7zYBNZfoAG1XFs
 0g6+XqfgLsDrTIeqz4/b98exXPdQqFNgRlUFnbVa0hZcehwxFUsb8J9edPl60k3r
 SYTOaIB8KuKstaNnaWJZm678THDrAXwpxSH9/ORRLX9tCnGBOY1Uy9Q+TJtpQ4K+
 YGEeoKhMTMFcWxxZvpT75tvJMtcRdUw9rT+a5yuyD56NdYUmwiEw5c8hBa3vc26X
 C9P5jBxXbZIQQW67wMt0fFT1QdU5RA==
 =qKsO
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20200121' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

---------------------------------

imx8: cleanup, fix warnings
imx6ull: add VisionSOM SoM and EVK
mx7ulp: fix warning due network, cleanup
mx7dsabre: Fix dm probe pmic
imx6: fixed for vining2000

Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/639512296
2020-01-21 08:36:50 -05:00
Tom Rini
07add22cab Merge tag '2020-01-20-ti-2020.04' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti
K3 J721E:
* DMA support.
* MMC and ADMA support.
* EEPROM support.
* J721e High Security EVM support.
* USB DT nodes

K3 AM654:
* Fixed boot due to pmic probe error.
* USB support and DT nodes.
* ADMA support

DRA7xx/AM57xx:
* BBAI board support
* Clean up of net platform code under board/ti

AM33/AM43/Davinci:
* Reduce SPL size for omap3 boards.
* SPL DT support for da850-lcdk
* PLL divider fix for AM335x
2020-01-20 14:54:55 -05:00
Jorge Ramirez-Ortiz
4cd1f979b2 arm: dts: imx7ulp-evk: remove mux value from pad configuration
The mux mode is embedded in the PAD definition and therefore there is
no need to repeat it in the PAD configuration value (more over since
this information will be masked out when the configuration value is
applied).

Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-01-20 15:38:16 +01:00
Anatolij Gustschin
68b49056e6 arm: dts: i.mx8x: add #cooling-cells properties
Fix dtb building warnings:
Warning (cooling_device_property): /thermal-zones/cpu-thermal0/cooling-maps/map0:
Missing property '#cooling-cells' in node /cpus/cpu@0 or bad phandle (referred from cooling-device[0])

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-01-20 15:38:16 +01:00
Arkadiusz Karas
5b6f8f3083 ARM: imx: mx6ull: Add iMX6ULL VisionSOM SoM and EVK
Add iMX6ULL VisionSOM SoM and VisionCB-RT-STD evaluation board support.
The SoM has an iMX6ULL, 512 MiB of DRAM and microSD slot. The carrier
board has Ethernet, USB host port, USB OTG port.

Signed-off-by: Arkadiusz Karas <arkadiusz.karas@somlabs.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2020-01-20 15:38:16 +01:00
Vignesh Raghavendra
60120071da arm: dts: k3-am654-base-board: enable USB1
Add pinmux for USB1 and enable it as a peripheral port in U-Boot
specific dtsi since U-Boot does not support OTG.
Disable USB0 as its not available on the baseboard.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:29 +05:30
Vignesh Raghavendra
a1ac85dad2 arm: dts: k3-am65-main: add USB support
Add support for USB0 and USB1 instances on the AM6 SoC.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:29 +05:30
Adam Ford
e36c70e86b ARM: dts: omap3/omap35 Torpedo and SOM-LV: Unify and shrink SPL dtb
None of these boards boot, but the solution appears to be the same.
All the boards have SPL that is too large.  With a few defconfig
options removed, these corresponding options can be removed from
their respective SPL dtb files.

This patch unifies the DM37/OMAP35 boards' -u-boot.dtsi files
to remove gpio's, i2c, bandgap, thermal zones, unneeded uarts, and
unneeded MMC nodes.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Lokesh Vutla
57a088a0f0 arm: dts: k3-am654-r5-base-board: Fix power-domains for wkup_vtm0
wkup_vtm populates only 1 power-domain cell in it's node. But the
power-domain cell are defined as 2. Due to this the following warning
comes during build:

arch/arm/dts/k3-am654-r5-base-board.dtb: Warning (power_domains_property):
/interconnect@100000/interconnect@28380000/interconnect@42040000/
wkup_vtm@42050000:power-domains: property size (8) too small for cell size 2

Fix this by updating the power-domain cells.

Fixes: cfa6bd549c ("arm: dts: k3-am654-r5-base-board: Add VTM node")
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Andreas Dannenberg
c44fb27af8 arm64: dts: k3-j721e-common-proc-board: Fully enable wkup_i2c0 use
Make the wkup_i2c0 module usable across all stages of U-Boot by adding
the needed definitions including the associated pinmux definitions.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Jason Kridner
a84189464c board: ti: beagleboneai: add dts file
BeagleBoard.org BeagleBone AI is an open source hardware single board
computer based on the Texas Instruments AM5729 SoC featuring dual-core
1.5GHz Arm Cortex-A15 processor, dual-core C66 digital signal
processor (DSP), quad-core embedded vision engine (EVE), Arm Cortex-M4
processors, dual programmable realtime unit industrial control
subsystems and more. The board features 1GB DDR3L, USB3.0 Type-C, USB
HS Type-A, microHDMI, 16GB eMMC flash, 1G Ethernet, 802.11ac 2/5GHz,
Bluetooth, and BeagleBone expansion headers.

For more information, refer to:
https://beaglebone.ai

The corresponding patch against the mainline linux kernel can be found
at: https://patchwork.kernel.org/patch/11254903/

This patch introduces the BeagleBone AI device tree.

Note that the device use the "ti,tpd12s016" component which is software
compatible with "ti,tpd12s015". Thus we only use the latter driver.

Signed-off-by: Jason Kridner <jdk@ti.com>
Signed-off-by: Caleb Robey <c-robey@ti.com>
Cc: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Faiz Abbas
ccc855e9d9 arm: dts: k3-j721e-common-proc-board: Add pinmux for SD card
Add pinmux for sdhci1 node connected to the SD card.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Faiz Abbas
2e6e3a4e8c arm: dts: k3-j721e-common-proc-board: Remove voltage-ranges from sdhci nodes
voltage-ranges properties are NOP. Remove them.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Faiz Abbas
fe0e30c7ba mmc: am654_sdhci: Get Xin clock by name
Get clk_xin by name instead of by index to avoid having to put clocks in
the same order in all devices.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Adam Ford
d2a67e362f ARM: dts: da850-lcdk: Update DTS files for SPL device tree support
Currently, the da850-lcdk uses SPL_OF_PLATDATA and manually loads
the necessary source code instead of using the auto-generated,
because the drivers don't properly autogenerate the code.

This patch simply enables the various device tree options to
mimic the da850-evm which doesn't need or use OF_PLATDATA for
device tree support.  It does not disable OF_PLATDATA.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Vignesh Raghavendra
5aeab3bf5e arm: dts: k3-j721e: Add DT nodes for USB
J721e has two instances of Cadence USB3 controller. Add DT nodes for the
same. USB0 is configured to device mode and USB1 is configured to host
mode. For now only high speed mode is supported.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20 10:10:28 +05:30
Marek Vasut
db48e11b1e ARM: dts: stm32: Add missing ETHCK clock to ethernet node
Add missing 'eth-ck' clock to the ethernet node. These clock are used to
generate external clock signal for the PHY in case 'st,eth_ref_clk_sel'
is specified.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-01-17 16:26:42 +01:00
Patrick Delaunay
846254888e stm32mp1: split board and SOC support for STM32MP15x family
Split the board and SOC support for STM32MP15x family and
prepare the introduction of new boards with STM32MP15x.

This path define the 2 configurations:
- STM32MP15x: STM32MP15x soc support (new)
- TARGET_ST_STM32MP15x: STMicroelectronics board support (choice)

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-01-17 13:58:27 +01:00
Tom Rini
92329e2413 Xilinx/FPGA changes for v2020.04
ARM64:
 - Add INIT_SPL_RELATIVE dependency
 
 SPL:
 - FIT image fix
 - Enable customization of bl2_plat_get_bl31_params()
 
 Pytest:
 - Add test for octal/hex conversions
 
 Microblaze:
 - Fix manual relocation for one SPI instance
 
 Nand:
 - Convert zynq/zynqmp drivers to DM
 
 Xilinx:
 - Enable boot script location via Kconfig
 - Support OF_SEPARATE in board FDT selection
 - Remove low level uart setup it is done later by code
 - Add support for DEVICE_TREE variable passing for SPL
 
 Zynq:
 - Enable jtag boot mode via distro boot
 - Removing unused baseaddresses from hardware.h
 - DT fixups
 
 ZynqMP:
 - Fix emmc boot sequence
 - Simplify spl logic around bss and board_init_r()
 - Support psu_post_config_data() calling
 - Tune mini-nand DTS
 - Fix psu wiring for a2197 boards
 - Add runtime MMC device boot order filling in spl
 - Clear ATF handoff handling with custom bl2_plat_get_bl31_params()
 - Add support u-boot.its generation
 - Use single image configuration for all platforms
 - Enable PANIC_HANG via Kconfig
 - DT fixups
 - Firmware fixes
 - Add support for zcu208 and zcu1285
 
 Versal:
 - Fix emmc boot sequence
 - Enable board_late_init() by default
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXiAK2AAKCRDKSWXLKUoM
 IX3VAJ41GJXBwP7Z9hX9RFhsqOu0M+NdegCdFvMUaCQ1bSvgAMOnDL+JeB21+Qo=
 =qSbv
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2020.04' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx/FPGA changes for v2020.04

ARM64:
- Add INIT_SPL_RELATIVE dependency

SPL:
- FIT image fix
- Enable customization of bl2_plat_get_bl31_params()

Pytest:
- Add test for octal/hex conversions

Microblaze:
- Fix manual relocation for one SPI instance

Nand:
- Convert zynq/zynqmp drivers to DM

Xilinx:
- Enable boot script location via Kconfig
- Support OF_SEPARATE in board FDT selection
- Remove low level uart setup it is done later by code
- Add support for DEVICE_TREE variable passing for SPL

Zynq:
- Enable jtag boot mode via distro boot
- Removing unused baseaddresses from hardware.h
- DT fixups

ZynqMP:
- Fix emmc boot sequence
- Simplify spl logic around bss and board_init_r()
- Support psu_post_config_data() calling
- Tune mini-nand DTS
- Fix psu wiring for a2197 boards
- Add runtime MMC device boot order filling in spl
- Clear ATF handoff handling with custom bl2_plat_get_bl31_params()
- Add support u-boot.its generation
- Use single image configuration for all platforms
- Enable PANIC_HANG via Kconfig
- DT fixups
- Firmware fixes
- Add support for zcu208 and zcu1285

Versal:
- Fix emmc boot sequence
- Enable board_late_init() by default
2020-01-16 09:45:40 -05:00
Sam Shih
098c063765 arm: dts: mediatek: move u-boot properties to -u-boot.dtsi file
This patch move u-boot properties to -u-boot.dtsi file.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
Sam Shih
c7fbc62082 Add support for MT7622 reference board
This adds a general board file based on MT7622 SoCs from MediaTek.
This commit is adding the basic boot support for the MT7622 rfb.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
2020-01-16 09:39:45 -05:00
Sam Shih
ac57e2b013 ARM: MediaTek: Add support for MediaTek MT7622 SoC
Add support for MediaTek MT7622 SoC. This include the file
that will initialize the SoC after boot and its device tree.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
mingming lee
b9bf3cbfd6 ARM: MediaTek: add basic support for MT8512 boards
This adds a general board file based on MT8512 SoCs from MediaTek.

Apart from the generic parts (cpu) we add some low level init codes
and initialize the early clocks.

This commit is adding the basic boot support for the MT8512 eMMC board.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
mingming lee
953bb4c3ce ARM: MediaTek: Add support for MediaTek MT8512 SoC
Add support for MediaTek MT8512 SoC. This include the file
that will initialize the SoC after boot and its device tree.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-16 09:39:45 -05:00
Tom Rini
fb537657d9 -----------------------------------
- imx8:
 	add capricorn giedi deneb boards
 - imx6:
 	fixed fow wandboard
 - imx7: DM_ETHER for pico-imx7d
 - fsl_esdhc_imx: add broken-cd property
 - New SOC: IMXRT10xx
 
 Travis:
 	https://travis-ci.org/sbabic/u-boot-imx/builds/637126531
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl4fDV8PHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3rIoMAJpEFx8ModHg3Xx69zQDcjHgzQn+dPatKgZc
 btSMCuAU3Toxifxj+/QR1NNNNYLBFG4BneqahbKV/c3seIbQjPJLxqTf4ceAJY6o
 MdsbcYSm8KwkLv2UWHV0CHTKtVJzNAxprPoW5ZxrULDORPyl56hdUWOKiDnKPx0z
 /vUeF7R3jglIMZ84rEDLSOew0xiYxhicMXfZB4oc2Jj8lXrpSHYf4adFitk9zG1j
 dumCkYSfDVyqeZytbkDa0CEZdJrXuy+tat2nTc30Asb4g/HoAuuST33cO29IMwqC
 foz3SMRFYgpHahYhVyNW8X+qLPxXGvIWi9md3fm9dNc44MRjVdj0dIq+vVY5lbct
 FWkayqmeMZLHLzzlbziIOsgDSo4n12MtAfcA8fLDN6OcxJL13A2xfR6E6BoaCgwY
 a7SRJWvr9AnVayOAH07rCCMvJNtppD5fi54a65LEKs7cUgeUY030ebhhqvzcDosH
 n++s1ukmD44yoX6vxruDQz2yWcmW3Q==
 =v3rf
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20200115' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

-----------------------------------
- imx8:
	add capricorn giedi deneb boards
- imx6:
	fixed fow wandboard
- imx7: DM_ETHER for pico-imx7d
- fsl_esdhc_imx: add broken-cd property
- New SOC: IMXRT10xx

Travis:
	https://travis-ci.org/sbabic/u-boot-imx/builds/637126531
2020-01-15 09:22:15 -05:00
Giulio Benetti
8d9c0762a8 imx: imxrt1050-evk: Add support for the NXP i.MXRT1050-EVK
This commit adds board support for i.MXRT1050-EVK from NXP. This board
is an evaluation kit provided by NXP for i.MXRT105x processor family.

More information about this board can be found here:
https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1050-evaluation-kit:MIMXRT1050-EVK

The initial supported/tested devices include:
- Debug serial
- SD

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14 22:54:00 +01:00
Giulio Benetti
e12b737e93 ARM: dts: imxrt1050: add dtsi file
Add dtsi file for i.MXRT1050.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14 22:53:59 +01:00
Anatolij Gustschin
85d89b9399 imx: dts: imx8dx: add I2C IPG clock for bus 0 and 2
IPG clock description is missing for I2C0 and I2C2 busses,
add it. Otherwise we see -ENODATA error when trying to get
I2C clock for these busses.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2020-01-14 22:49:05 +01:00
Fabio Estevam
80d37c7959 ARM: dts: imx6ul-14x14-evk: Pass the "broken-cd" property
imx6ul-14x14-evk does not have a GPIO dedicated for reading the card
detect pin on the eSDHC2 port. In such cases the "broken-cd" property
must be passed, otherwise the card cannot be detected.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2020-01-14 22:48:10 +01:00
Anatolij Gustschin
eb79cafea2 imx: add imx8x based deneb board
Add support for Capricorn Deneb SoM variant.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-01-14 22:15:21 +01:00
Anatolij Gustschin
7b5b934313 imx: add imx8x capricorn giedi board
Add support for i.MX8X based Capricorn Giedi SoM.

Supported interfaces: GPIO, ENET, eMMC, I2C, UART.

Console output:

  U-Boot SPL 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100)
  Trying to boot from MMC1
  Load image from MMC/SD 0x3e400

  U-Boot 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) ##v01.07

  CPU:   NXP i.MX8QXP RevB A35 at 1200 MHz at 30C

  Model: Siemens Giedi
  Board: Capricorn
  Boot:  MMC0
  DRAM:  1022 MiB
  MMC:   FSL_SDHC: 0
  Loading Environment from MMC... OK
  In:    serial@5a080000
  Out:   serial@5a080000
  Err:   serial@5a080000
  Net:   eth1: ethernet@5b050000 [PRIME]
  Autobooting in 1 seconds, press "<Esc><Esc>" to stop

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-01-14 22:15:21 +01:00
Stephen Warren
fddfe87359 tegra: fdt: Add tegra186-u-boot.dtsi
All Tegra chips except Tegra186 have a tegraNNN-u-boot.dtsi. Duplicate
Tegra210's copy of this file for Tegra186. This ensures that a /binman node
exists in U-Boot's control DT. Subsequent to 3c10dc95bd ("binman: Add a
library to access binman entries") this appears to be required. I haven't
really investigated why all this is necessary or how it works, but simply
observed the boot failure listed below, bisected it, noticed the
inconsistency in DT files, and found that fixing it resolved the boot
issue.

    U-Boot 2020.01-rc4-00256-g3c10dc95bdd0 (Jan 07 2020 - 10:25:00 -0700)

    SoC: tegra186
    Model: NVIDIA P2771-0000-500
    Board: NVIDIA P2771-0000
    DRAM:  7.8 GiB
    initcall sequence 00000000fffb7858 failed at call 00000000800955a8 (err=-22)
    ### ERROR ### Please RESET the board ###

Fixes: 3c10dc95bd ("binman: Add a library to access binman entries")
Fixes: f2faffecb0 ("binman: tegra: Convert to use binman")
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-14 10:35:19 -07:00
Zumeng Chen
d12c8ccdc4 ARM: dts: zynq: enablement of coresight topology
This patch is to build the coresight topology structure of zynq-7000
series according to the docs of coresight and userguide of zynq-7000.

Signed-off-by: Zumeng Chen <zumeng.chen@windriver.com>
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:56 +01:00
Michal Simek
b0f36d5ec1 arm64: zynqmp: Sync gem clock nodes with mainline Linux
Just fixing indentation and update year in Copyright.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:56 +01:00
Michal Simek
b94a3c2ebe arm64: zynqmp: Sync gpio-controller name location
Sync location with mainline kernel.
Added by Linux kernel commit 75926f07baae
("arm64: dts: zynqmp: Add missing gpio-controller to ps gpio").

Fixes: 0b33e0b156 ("arm64: zynqmp: Add missing gpio property to dtsi")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:56 +01:00
Sudeep Holla
ad967af6bd arm64: dts: zynqmp: replace gpio-key,wakeup with wakeup-source property
Most of the legacy "gpio-key,wakeup" boolean property is already
replaced with "wakeup-source". However few occurrences of old property
has popped up again, probably from the remnants in downstream trees.

This patch replaces the legacy properties with the unified
"wakeup-source" property introduced by:
"Input: gpio_keys - switch to using generic device properties"
(sha1: 700a38b27eefc582099fdf69effacfad0ad738a4)

Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:56 +01:00
Jan Kiszka
85eeaae3cc arm64: dts: zcu100-revC: Give wifi some time after power-on
Somewhere along recent changes to power control of the wl1831, power-on
became very unreliable on the Ultra96, failing like this:

wl1271_sdio: probe of mmc2:0001:1 failed with error -16
wl1271_sdio: probe of mmc2:0001:2 failed with error -16

After playing with some dt parameters and comparing to other users of
this chip, it turned out we need some power-on delay to make things
stable again. In contrast to those other users which define 200 ms,
Ultra96 is already happy with 10 ms.

Fixes: 5869ba0653b9 ("arm64: zynqmp: Add support for Xilinx zcu100-revC")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:55 +01:00
Michal Simek
096d7f5b3e arm64: dts: zynqmp: Fix node names which contain "_"
s/_/-/ for node names.

It fixes warnings like this:
... Warning (node_name_chars_strict): /cpu_opp_table:
Character '_' not recommended in node name ...

Issues reported by make dtbs W=12

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:55 +01:00
Rob Herring
8e3501ec90 arm64: dts: Remove inconsistent use of 'arm,armv8' compatible string
The 'arm,armv8' compatible string is only for software models. It adds
little value otherwise and is inconsistently used as a fallback on some
platforms. Remove it from those platforms.

This fixes warnings generated by the DT schema.

Reported-by: Michal Simek <michal.simek@xilinx.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Chanho Min <chanho.min@lge.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Wei Xu <xuwei5@hisilicon.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
Acked-by: Robert Richter <rrichter@cavium.com>
Acked-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-01-14 09:05:55 +01:00
Michal Simek
32da535b89 arm64: zynqmp: Remove incorrect phy from DT for zcu102-revB up
zcu102-revB/up are not removing phy from revA properly because of incorrect
name.

Fixes: 2975a42b42 ("arm64: zynqmp: Use ethernet-phy as node name for ethernet phys")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:55 +01:00
Michal Simek
4ed9732471 arm64: zynqmp: Add support for zcu1285 revA board
zcu1285 is the same as zcu1275 but it is using Avnet FMC
http://www.ultrazed.org/product/network-fmc-module

Unfortunately not everything is connected now that's why this is only
describing system which Xilinx is using.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:55 +01:00
Michal Simek
cecf7f4958 arm64: zynqmp: Switch zcu100 revC to use firmware clock driver
There is no issue with using firmware based driver instead of fixed clock
one.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:55 +01:00
T Karthik Reddy
166fb46ad3 zynqmp: dts: Cleanup no-1-8-v property from sdhci dt nodes
Removed no-1-8-v property from zynqmp sdhci devicetree nodes to
allow UHS-I capable SD cards to work in SD3.0 UHS modes.

Boards that does not have level shifter for SD, does not support 1.8v.
so no-1-8-v property to sdhci dt nodes should be present in zcu102 Rev-A,B,
zcu104 Rev-A,C, zcu100, zcu1275 Rev-B boards.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:55 +01:00
Michal Simek
a81186fd9f arm64: zynqmp: Add support for zcu208
The board is very similar to zcu216 with zu49dr device.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:55 +01:00
Michal Simek
4cd8bf47ed ARM: zynq: Add missing nand/smcc nodes
Add missing nand/smcc description.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:55 +01:00
Raviteja Narayanam
268695dbd1 arm64: zynqmp: Correct the type of eeprom for zcu216 boards
Corrected the type of eeprom in device tree for zcu216 boards according
to schematic.

Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:55 +01:00
Michal Simek
50e45b7c6e arm64: zynqmp: Fix ina226 shunt resistor value
Fix shunt resistor value for ina226 vccint_ams and vccint_io_bram_ps.
2mOhm shunt was only in early board revision schematics but never got to
real revA board.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:55 +01:00
Michal Simek
bc12dec017 arm64: zynqmp: Remove nand partition description from mini-nand
There shouldn't be a need to use any partition description because it
can be used for writing data anywhere.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:53 +01:00
Tom Rini
21aede21b0 UniPhier SoC updates for v2020.04
- add pinmux nodes for I2C ch5, ch6
 
 - enable SPI driver and command
 -----BEGIN PGP SIGNATURE-----
 
 iQJSBAABCgA8FiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl4WDlkeHHlhbWFkYS5t
 YXNhaGlyb0Bzb2Npb25leHQuY29tAAoJED2LAQed4NsG/tAP/3V1E52ESaMjqjSn
 eU2jrXMJFTWcvkVUfLzWnXuApPPx5Xm7nGVVlJory3z8PI6KJFuZJTejeS2tOtU3
 5JjQ56GyldXwyGQp8WsQL8RhGCMovlbUNXuGSR4MNoN0U+81Y1RGYuaNP+qwXfnK
 BVtQBdtnAuH4RxywNNVsxwGoCra7b30cKdmiowc6cb6u4RSnDv42EpgHan2JCgYx
 pui7+hLK7ZdN/ssgc6LquuwIW6IICAdlLosMjsmVty53yLrcXRZtiVHEZskgLC+O
 L84fqDSShgoNnaJJFC2kebuf6iFzw4ZPmSU2tEW4mGvXLC7OEqwvOZqrs0GVsFhz
 48CnkqXYCbfm696minmikXDSVSy1A2ZlRV8bJID0vFjUNot5bor9VSRpe9UV9hqv
 PsevZWPfTuravk7TUBzdn2/dAEtDuzUHSt6v5AJI+08Sph1qYVyGOizpAOJUkv7E
 p0dBM3hhSeGE3kNPwWOB1bHjEmyIc1dXeH5ZNYf0mb1tIEOVSzJMJIoluBJHO6BA
 56F9eBi2rC9gL9R5qV9guugdidYeLE7tys7Q6P3NFyxiouENB/Dcd0e2TSc474Uj
 FaDSUONYNbMP0wr8ShCPQ0RGw8dyCvYBPEdSqYVdNLZZ2TQMX/cgjz+0bDxhFq3r
 9Ol9Tlf9qPGLRDLmmA9d+xFEjyS7
 =3xuH
 -----END PGP SIGNATURE-----

Merge tag 'uniphier-v2020.04' of https://gitlab.denx.de/u-boot/custodians/u-boot-uniphier

UniPhier SoC updates for v2020.04

- add pinmux nodes for I2C ch5, ch6

- enable SPI driver and command
2020-01-08 15:25:13 -05:00
Tom Rini
deb287b561 ---------------------------------------------------------------------
Add i.MX8MP SoC and EVK board
 Update README for i.MX8MN EVK and fix mmc env
 Add pca9450 driver
 --------------------------------------------------------------------
 
 Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/634211885
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl4WDPkPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et30w0L/RGSJLeO460ULkMQMGEkbMLODzWinIuVSUUe
 wEGikQZwI4AiDWX1NA57Dpx7uVF/ADa/NT2x9YLZL8VPHgzuU7RDp57pdBymU0Wk
 k/kDqSPVkIA0CX8iF/l092vOOIKecIpxpEXblRYs+Az7Vusrwm6SxQ3hjSn6KgpY
 gtu/VB+XizejiYmE5hJhu8cvMpAeCrJ0a+qPJC+hVsvFC2wV3NoqJspMOIUt+rPm
 UCv4uSisSWf2MgR2rEYbX9IDgu7S3hcj/8Ml4f9aqQQBciS4X/Af+iUjZL/mXY2K
 ZerDGQhC92TRmTj9Ir6mf8CEAdt0scsNgTVvteN/evP85K25s2l7yrYWjyp5H/vm
 tao0H/Lr8gKlLKgMSgdLixoV8eaMHPE4I/BD+DGVIK1rOQ35zzYTJRd2PIxg7GiP
 7orW29rJrPMAMDBbeEi657u/zUS7ZUzkrLWnIIoFurUfZ83pjlqlxcT1zfZ0juJk
 z8iQKU4oKdN4gL5zQPbyqCHcCdlDJw==
 =YoPF
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20200108' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

---------------------------------------------------------------------
Add i.MX8MP SoC and EVK board
Update README for i.MX8MN EVK and fix mmc env
Add pca9450 driver
--------------------------------------------------------------------

Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/634211885
2020-01-08 15:24:50 -05:00
Tom Rini
ce022f2857 Merge branch 'master' of git://git.denx.de/u-boot-socfpga 2020-01-08 15:23:49 -05:00
Tom Rini
9af51fb3a5 - Khadas VIM3L based on Amlogic S905D3 support
- Various fixups for amlogic boards
 - Unnecessary header includes drop into video/meson
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAl4V0PgACgkQd9zb2sjI
 SdEuPw//c0APhovWXXCsRckccBF8SK3WRsVcj5M36g7WXVdUo+MXaPzDUEyDAMfU
 xS51FaN7lJJ7ntxEvJ3loFDYh0WrYoanCW+9KxMnJ0GVTdWg6nL0u4yq4exD9f4d
 N9Tv8NaN0y2Jn97Y3L70qlutVJjTzUd1oRKWmGDESvXj3+WrJdffEL0uBrCcbmF/
 kyEQ3RiDuGhfNrC/mSdhQFG2kmeQc43+Fb1OYq8Wm28zwtYvZuJpdn7FTtwGQk0+
 iCjIUN0RKcD+HedJVxHmSnOOTehydk6xQX9215ebo/tTz+WtoqXrFPjEr1mgAhRV
 ojEdJcEKAFGwTYuRDmeO6lwAv+k0fkF4drGi7uAOQa3JwD90aKgR0Ig80CzVq1vW
 m79WDHFbaQnpIGf94kONF8X0M9nWN9/XYmpJe6KuQaO7YEsIIBsbFP657pJp1J1m
 xfwzl2xlx7yaDeR8xv4/N67REuSF/ILeJA0tykkm7NEWkkBrz1d+dXiOaTceY/Wu
 z7s3QGpHINMOzuxMZKEZazt+0KQ4UlbAxYRQU3oNRkW3WaCoGimpbjC9FJa4FpoA
 Cx2PBRunzx8rK87ZS/X7VUa2v454MSkCGwpmqP+PrekoL2rsRNx/3gWHpzb+Z7E/
 nAd0uukYy/WSlzv6bfpRdemQi27gSvDnERf4dj/4kiAiMoKkeiA=
 =rkHZ
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20200108' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

- Khadas VIM3L based on Amlogic S905D3 support
- Various fixups for amlogic boards
- Unnecessary header includes drop into video/meson
2020-01-08 15:23:37 -05:00
Masahiro Yamada
49a7282d76 ARM: dts: uniphier: add pinmux nodes for I2C ch5, ch6
The next generation SoC can connect on-board slave devices via
I2C ch5 and ch6.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-01-09 01:57:05 +09:00
Peng Fan
439321b264 imx: add i.MX8MP EVK board
Add basic i.MX8MP EVK board support

U-Boot SPL 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800)
power_pca9450b_init
DDRINFO: start DRAM init
DDRINFO:ddrphy calibration done
DDRINFO: ddrmix config done
Normal Boot
Failed to find clock node. Check device tree
WDT:   Not found!
Trying to boot from BOOTROM
image offset 0x8000, pagesize 0x200, ivt offset 0x0

U-Boot 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800)

CPU:   Freescale i.MX8MP rev1.0 at 1000 MHz
Reset cause: POR
Model: NXP i.MX8MPlus EVK board
DRAM:  6 GiB
MMC:   FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Hit any key to stop autoboot:  0
u-boot=> mmc list
FSL_SDHC: 1 (SD)
FSL_SDHC: 2

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08 13:20:09 +01:00
Peng Fan
c86987d067 arm: dts: freescale: Add i.MX8MP dtsi support
The i.MX8M Plus Media Applications Processor is part of the growing
mScale family targeting the consumer and industrial market. It brings
an effective Machine Learning and AI accelerator that enables a new
class of applications. It is built in Samsung 14LPP to achieve both
high performance and low power consumption and relies on a powerful
fully coherent core complex based on a quad core ARM Cortex-A53 cluster
and Cortex-M7 low-power coprocessor, audio digital signal processor,
machine learning and graphics accelerators.

Add the basic dtsi support for i.MX8MP.

Patch from Anson Huang for Kernel
https://patchwork.kernel.org/patch/11310915/

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08 13:20:08 +01:00
Peng Fan
d857a6a697 arm: dts: add i.MX8MP pinfunc header
Add i.MX8MP pinfunc header for dts usage

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08 13:20:08 +01:00
Tom Rini
d8a3f5259a New for 2020.04
---------------
 
 - New boards
 	Embedded Artists COM board
 	Xea Board
 - Switch to DM:
 	Aristainetos boards
 	Toradex colibri (DM_ETH)
 	iCubox
 	GE bx50v3
 	mx7dsabre (DM_ETH)
 	cx9020
 - New features:
 	Bootaux with elf files
 	Default SYS_THUMB_BUILD for i.MX6/7
 - Fixes:
 	DHCOM i.MX6 PDK
 	Engicam
 	i.MX8M tools (imx8m_image)
 
 Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/633679664
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl4UhxIPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3MZYMAMEttt0cNxBg0/zBjNuMSn3Bq1lpN+KKsY97
 Cme06wZQdlbdfHhXyKiVfky2vjrZa1nacUgqSQlJdzvsPQbg9TE/8zxTd13BNw6C
 Tn6IHS7godvz9Puf0HD8skoYBpVm/LQKmSEfcPAEGOSnHzZx/MrMU0Qze3PgqWu5
 0xbp8yBsyVw96/zBRZtbwXy4COuS1viFrbf82EgHAZUsmXpgvJB59i8rOewwWNR1
 TpyhPbHlq42X+0Qrwq0RGtUr+t4tI6czlxeReOBgb1/YqJGJ6rEqbGm90XROW3sA
 IeU5PY7LUk8OFRQtyfBSSYgFgFmgOYzfpXe9YSUoIxV55OvCad7ksaRctjPJnKqy
 CndINrG9JnV9T5N0LczAgVFXWT49ybPziyZRDHERDg1XosuHnNk7r0co05uacYUN
 ZFgB21mzQ8qGPAd1C3tMXG05ZA9cdRCmWxKxxF6z2/2FT15euZQ0obwAR1HsiJmZ
 wLbyPl1Hi7ZkwvTT/Wk3se0zGpNj2A==
 =vOZ+
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20200107' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

New for 2020.04
---------------

- New boards
	Embedded Artists COM board
	Xea Board
- Switch to DM:
	Aristainetos boards
	Toradex colibri (DM_ETH)
	iCubox
	GE bx50v3
	mx7dsabre (DM_ETH)
	cx9020
- New features:
	Bootaux with elf files
	Default SYS_THUMB_BUILD for i.MX6/7
- Fixes:
	DHCOM i.MX6 PDK
	Engicam
	i.MX8M tools (imx8m_image)

Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/633679664
2020-01-07 08:45:43 -05:00
Ley Foon Tan
fb3862823b arm: dts: agilex: Add base dtsi and devkit dts
Add device tree files for Agilex SoC platform.

socfpga_agilex-u-boot.dtsi and socfpga_agilex_socdk-u-boot.dts contains
Uboot specific DT properties.

socfpga_agilex.dtsi and socfpga_agilex_socdk.dts are from Linux
(kernel/git/dinguyen/linux.git, commit 6f0bf971bacacc)

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07 14:38:34 +01:00
Ley Foon Tan
dd72cbd9e9 arm: dts: socfpga: Add u-boot, dm-pre-reloc for sysmgr and clkmgr nodes
Add u-boot,dm-pre-reloc for sysmgr and clkmgr nodes to use it in SPL.
In preparation to get base address from DT.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07 14:38:33 +01:00
Christian Hewitt
b9d5480fdb ARM: dts: Import Khadas VIM3L DT from Linux 5.5-rc1
Import the Khadas VIM3L device-tree from [1]

[1] e42617b825f8 ("Linux 5.5-rc1")

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-01-07 11:16:53 +01:00
Michael Trimarchi
b1278a8e3e ARM: dts: imx6qdl-icore-1.5: Remove duplicate phy reset methods
Engicam i.CoreM6 1.5 Quad/Dual MIPI dtsi is reusing fec node
from Engicam i.CoreM6 dtsi but have sampe copy of phy-reset-gpio
and phy-mode properties.

So, drop this phy reset methods from imx6qdl-icore-1.5 dsti file.

Cc: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-07 10:26:57 +01:00
Jagan Teki
f838ebfe5a ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL
The EDIMM STARTER KIT i.Core 1.5 MIPI Evaluation is based on
the 1.5 version of the i.Core MX6 cpu module. The 1.5 version
differs from the original one for a few details, including the
ethernet PHY interface clock provider.

With this commit, the ethernet interface works properly:
SMSC LAN8710/LAN8720 2188000.ethernet-1:00: attached PHY driver

While before using the 1.5 version, ethernet failed to startup
do to un-clocked PHY interface:
fec 2188000.ethernet eth0: could not attach to PHY

Similar fix has merged for i.Core MX6Q but missed to update for DL.

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-07 10:26:57 +01:00
Jagan Teki
d159b0236b ARM: dts: icorem6: Sync engicam device trees from v5.4
Sync Engicam device tree file from v5.4 linux-next.

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-07 10:26:57 +01:00
Igor Opaniuk
45997eb6c0 ARM: dts: imx7: imx7_colibri: introduce fec node
Sync DTS with the mainline Linux and introduce fec node and
regulator configuration for rn5t567 PMU.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-01-07 10:26:56 +01:00
Igor Opaniuk
f9be62a608 ARM: dts: imx6_apalis: introduce fec node
Sync DTS with the mainline Linux and introduce fec node.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-01-07 10:26:56 +01:00
Igor Opaniuk
fbcd88095d ARM: dts: imx6_colibri: introduce fec node
Sync DTS with the mainline Linux and introduce fec node.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-01-07 10:26:56 +01:00
Joris Offouga
0d52bab462 mx7dsabre: Enable DM_ETH
Also sync device tree with v5.5-rc1
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
2020-01-07 10:26:56 +01:00
Fabio Estevam
0417ef17ac mx7ulp: Add support for Embedded Artists COM board
The Embedded Artists COM board is based on NXP i.MX7ULP.

It has a BD70528 PMIC from Rohm with discrete DCDC powering option and
improved current observability (compared to the existing NXP i.MX7ULP EVK).

Add the initial support for the board.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-01-07 10:26:56 +01:00
Steffen Dirkwinkel
ba1444eab6 imx: cx9020: migrate cx9020 to CONFIG_DM_USB
Note: gpio7_8 was never used for usb power regulator so we remove it here

Acked-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
2020-01-07 10:26:56 +01:00
Steffen Dirkwinkel
9c2b1b0f03 imx: cx9020: migrate cx9020 to CONFIG_DM_ETH
Acked-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
2020-01-07 10:26:56 +01:00
Parthiban Nallathambi
d98929d636 imx: sync with kernel device tree for Phycore SoM
Sync the Linux Kernel 5.4-rc6 device tree for Phytec Phycore
SoM and Segin board based on imx6UL and imx6ULL.

Changes includes Phytec naming convention for the devicetree files.

Signed-off-by: Parthiban Nallathambi <parthitce@gmail.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
2020-01-07 10:26:56 +01:00
Claudius Heine
f8420d7c0f ARM: dts: dh-imx6: add u-boot specific wdt-reboot node
The wdt-reboot node is needed for the sysreset_watchdog driver to
register a watchdog as a reset handler in case 'CONFIG_SYSRESET' is
enabled.

Signed-off-by: Claudius Heine <ch@denx.de>
2020-01-07 10:26:56 +01:00
Baruch Siach
281d5e435b arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2)
These DT files are copied from kernel v5.3 with no changes.

This is part 2 of 2 commits. Included are DT files for SOM rev 1.5, and
Hummingboard2 Gate/Edge.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-01-07 10:26:56 +01:00
Baruch Siach
730e6a0ca1 arm: dts: hummingboard: add cubox/hummingboard DT (part 1 of 2)
These DT files are copied from kernel v5.3 with no changes.

This is part 1 of 2 commits. Included are DT files for the original
Cubox-i and Hummingboard Base/Pro.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-01-07 10:26:56 +01:00
Robert Beckett
7915e150d6 board: ge: mx53ppd: use imx wdt
Enable DM imx WDT
Enable SYSRESET_WATCHDOG to maintain WDT based reset ability

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-07 10:26:56 +01:00
Robert Beckett
d494aeca46 board: ge: bx50v3: use imx wdt
Enable DM imx WDT
Enable SYSRESET_WATCHDOG to maintain WDT based reset ability

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-07 10:26:56 +01:00
Robert Beckett
6388f9921a board: ge: ppd: sync device tree from Linux
Copy device tree from linux for PPD.

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-07 10:26:56 +01:00
Robert Beckett
8c26739859 board: ge: bx50v3: sync devicetrees from Linux
Copy device trees from linux, keeping them as separate files for
each board to ease future sync.

Update board code to use generic bx50v3 dt initially, then select
the specific dt based on board detection.

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-07 10:26:56 +01:00
Lukasz Majewski
010e58d448 imx: Add support for i.MX28 based XEA board
This patch introduces support for i.MX28 based XEA board.

This board supports DM/DTS in U-Boot proper as well as DM aware drivers
in SPL (u-boot.sb) by using OF_PLATDATA.
More detailed information regarding usage of it can be found in
./board/liebherr/xea/README file.

U-Boot SPL 2019.10-rc1-00233-g6aa549f05c (Aug 12 2019 - 09:23:36 +0200)
Trying to boot from MMC1
MMC0: Command 8 timeout (status 0xf0344020)
mmc_load_image_raw_sector: mmc block read error

U-Boot 2019.10-rc1-00233-g6aa549f05c (Aug 12 2019 - 09:23:36 +0200)

CPU:   Freescale i.MX28 rev1.2 at 454 MHz
BOOT:  SSP SPI #3, master, 3V3 NOR
Model: Liebherr (LWE) XEA i.MX28 Board
DRAM:  128 MiB
MMC:   MXS MMC: 0
Loading Environment from SPI Flash... SF: Detected n25q128a13 with page size 256 Bytes, erase size 64 KiB, total 16 MiB
OK
In:    serial
Out:   serial
Err:   serial
Net:
Warning: ethernet@800f0000 (eth0) using random MAC address - ce:e1:9e:46:f3:a2
eth0: ethernet@800f0000
Hit any key to stop autoboot:  0

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2020-01-07 10:26:56 +01:00
Heiko Schocher
227cb30047 imx6: aristainetos: add support for rev C board
add support for revision C boards. This board has
no longer a NAND.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:56 +01:00
Heiko Schocher
c08aa77173 imx6: aristainetos: add aristainetos 2b csl
add aristainetso board version CSL.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:56 +01:00
Heiko Schocher
1204b9675e imx6: aristainetos: readd aristainetos 2b board
readd aristainetos 2b board.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:56 +01:00
Heiko Schocher
ccc7595a81 imx6: aristainetos: prepare dts for other board versions
as we switch to support DM and DTS, rework the existing
DTS trees. Change also Linux specific Device trees, goal
is to push this changes to linux.

Collect U-Boot specific changes in separate "*u-boot*" dts
files.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:55 +01:00
Heiko Schocher
8fb028ee20 imx6: aristainetos: add device tree from linux
Add device trees from Linux in preparation for driver model
conversions.

device tree files taken from Linux:
71ae5fc87c34: "Merge tag 'linux-kselftest-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest"

and added SPDX license identifier.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:55 +01:00
Tom Rini
5a8fa095cb Merge branch 'next'
Bring in the following merges:

commit 8fbbec12f7
Merge: 87f69f467a 63618e71e8
Author: Tom Rini <trini@konsulko.com>
Date:   Fri Jan 3 09:48:47 2020 -0500

    Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq into next

    - updates and fixes on ls1028a, lx2, ls1046a, MC-DPSPARSER support

commit 87f69f467a
Merge: c0912f9bbf 4466b99703
Author: Tom Rini <trini@konsulko.com>
Date:   Tue Dec 24 08:18:19 2019 -0500

    Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx into next

    - Enable DM driver on ppc/km boards
    - Enable DM_USB for some of NXP powerpc platforms: P5040, T4240, T208x,
      T104x, P4080, P2041, P2020, P1020, P3041
    - Some updates in mpc85xx-ddr driver, km boards

commit c0912f9bbf
Merge: 533c9f5714 a1d6dc3f84
Author: Tom Rini <trini@konsulko.com>
Date:   Wed Dec 18 07:20:19 2019 -0500

    Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-x86 into next

    - Various x86 common codes updated for TPL/SPL
    - I2C designware driver updated for PCI
    - ICH SPI driver updated to support Apollo Lake
    - Add Intel FSP2 base support
    - Intel Apollo Lake platform specific drivers support
    - Add a new board Google Chromebook Coral

commit 533c9f5714
Merge: 553cb06887 033e18b47b
Author: Tom Rini <trini@konsulko.com>
Date:   Tue Dec 17 07:53:08 2019 -0500

    Merge tag '20191217-for-next' of https://gitlab.denx.de/u-boot/custodians/u-boot-i2c into next

    i2c: for next
    - misc: i2c_eeprom:
      Add partition support and add ability to query size
      of eeprom device and partitions
    - i2c common:
      add support for offset overflow in to address and add
      sandbox tests for it.

commit 553cb06887
Merge: f39abbbc53 b4f98b3b16
Author: Tom Rini <trini@konsulko.com>
Date:   Thu Dec 12 08:18:59 2019 -0500

    Merge tag 'dm-next-13dec19' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm into next

    buildman improvements including toolchain environment feature
    sandbox unicode support in serial
2020-01-06 17:07:49 -05:00
Lokesh Vutla
196d3e4017 arm: dts: k3-j721e: ddr: Update to 0.2 version of DDR config tool
Update the ddr settings to use the DDR reg config tool rev 0.2.0.
This reduces the aging count(in DDRSS_CTL_274_DATA reg) to 15 in-order
to avoid DSS underflow errors.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Kevin Scholz <k-scholz@ti.com>
2020-01-03 09:47:10 -05:00
Tom Rini
28aa6dc29a Merge tag 'u-boot-rockchip-20191231' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- Fix latest mainline kernel for rk3308
- Update rk3288-evb config to suport OP-TEE
- Fix for firefly-px30 DEBUG_UART channel and make it standalone
- Script make_fit_atf add python3 support
- Fix rk3328 timer with correct COUNTER_FREQUENCY
- Fix rk3328 ATF support with enable spl-fifo-mode
2020-01-02 10:28:26 -05:00
Kever Yang
fa2047c473 rockchip: rk3328: enable spl-fifo-mode for emmc and sdmmc
Since mmc to sram can't do dma, add patch to prevent aborts transfering
TF-A parts.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-31 15:57:55 +08:00
Kever Yang
3176d47d35 rockchip: px30-firefly add standalone dts
Firefly Core-PX30-JD4 use UART2M1 while PX30 evb using UART2M0, the U-Boot
proper will use the dts setting to do the IOMUX init, and a separate dts
is needed for px30-firefly.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-27 14:26:13 +08:00
Vabhav Sharma
c1ead04bc4 arm64: lx2160a: dts: Fix UART node status
LX2160A PL011 UART driver fetch IP block values using
platform data from board file instead of device tree.

Modified UART nodes in device tree to disable state.

Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-12-26 16:00:20 +05:30
Diego Rondini
e7c15b7ab8 sun8i: h3: Support H3 variant of Orange Pi Zero Plus 2
Orangepi Zero Plus 2 is an open-source single-board computer, available
in two Allwinner SOC variants, H3 and H5. We add support for H3 variant
here, as the H5 is already supported.

H3 Orangepi Zero Plus 2 has:
- Quad-core Cortex-A7
- 512MB DDR3
- microSD slot and 8GB eMMC
- Debug TTL UART
- HDMI
- Wifi + BT
- OTG + power supply

Sync dts from linux v5.2 commit:
"ARM: dts: sunxi: h3/h5: Remove stale pinctrl-names entry"
(sha1: 75f9a058838be9880afd75c4cb14e1bf4fe34a0b)
Commit:
"ARM: dts: sun8i: h3: Refactor the pinctrl node names"
(sha1: a4dc791974e568a15f7f37131729b1a6912f4811)
has been avoided as it breaks U-Boot build.

Signed-off-by: Diego Rondini <diego.rondini@kynetics.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-12-18 20:14:16 +05:30
Hannes Schmelzer
05767707a8 dts: am335x-brsmarc1/xre1: insert phy_id again
commit 3b3e8a37d3
("arm: dts: am335x: sync cpsw/mdio/phy with latest linux - drop phy_id")

did sync with recent linux kernel and replaced therefore the 'phy_id'
property with a phy-handle pointing to the mdio.

This is OK for linux, but introduces trouble with the already running
vxWorks on this target.

So this commit here re-inerts the phy_id property beside the phy-handle
property to be compatible with both.

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-12-13 13:01:12 -05:00
Tom Rini
ac1ca99926 Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-net 2019-12-09 13:48:22 -05:00
Vignesh Raghavendra
4886f1cb59 arm: dts: k3-j721e-common-proc-board: Add DMA and CPSW related DT nodes
Add DT nodes related to DMA and CPSW to -u-boot.dtsi to get networking
up on J721e EVM.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
2019-12-09 09:47:43 -06:00
Nevo Hed
06f555274e arm: dts: armada-cp110-*dtsi: add xmdio nodes
Based on upstream-linux
See https://github.com/torvalds/linux/commit/f66b2aff.

However made the XSMI register window 0x16 (22) bytes per my reading
of the functional spec.  Similar commits in Marvels own repo bump it
to 0x200 (512) bytes but I did not see the reasoning for that.

https://github.com/MarvellEmbeddedProcessors/u-boot-marvell/commit/4d932b4.

Also added device-name attributes to prevent ambiguity in the `mdio`
command.

Signed-off-by: Nevo Hed <nhed+github@starry.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-12-09 09:47:42 -06:00
Grygorii Strashko
5efb69298b arm: dts: k3-am654-base-board-u-boot: change cpsw2g interface mode to rgmii-rxid
The AM654 SoC doesn't allow to disabling RGMII TX internal delay in CPSW2G
MAC. Hence, change CPSW2G interface mode to "rgmii-rxid" - RGMII with
internal RX delay provided by the PHY, the MAC will add an TX delay in this
case.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-12-09 09:47:42 -06:00
Tom Rini
2f02845817 Fixes for 2020.01
-----------------
 
 - imx8qxp_mek: increase buffer sizes and args number
 - Fixes for imx7ulp
 - imx8mm: Fix the first root clock in imx8mm_ahb_sels[]
 - colibri_imx7: reserve DDR memory for Cortex-M4
 - vining2000: fixes and convert to ethernet DM
 - imx8m: fix rom version check to unbreak some B0 chips
 - tbs2910: Disable VxWorks image booting support
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl3uLqsPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3YEEL/jAKMnREGNHCjvwvxkVVZ7sWHeRtqh+OXb8V
 VnZB0glptth1NDxWyHFZkcsVqjpRlUsm3/lA91xaFXcUB8EWnJMKVReHkB7v0bZW
 zHziN0rNPoTBVocRlpgPXt3zeSOR3Qg+rFesg4zmlXNIVPyvBanpDCxXDK60gdIi
 JDrAdIarP0UMK0roIFLIyvnJ+J/ib1ky1aJI8cdktXb+nSyVrMw5VDdmSBtTCp10
 6o/fJGtWfzXp59a8y9XnnVxNsU2c0URcsswub4fvWhhwJ86xiWGSEfm5Sybql6kS
 6PYjB7jGmdWJjYug7rFthl1Hnn1FULIH9qrxPePtD2ooUUjHPlDmElQqWkHoVlib
 yUAlWG87ZdjhmEMR1iSFlkcBpOD7SlmcvfYZdeedCdtzTwW0kj6lcX9fUKHE+17e
 3SJQtPxpMrVfnUDRn0ciAbwg8+1Tow6sv39j6iYi7jAITny9q16ErdRGup0wB19Y
 tZkmRdnhtjCalrfDoEaRGXZJDE15XQ==
 =L2zo
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20191209' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

Fixes for 2020.01
-----------------

- imx8qxp_mek: increase buffer sizes and args number
- Fixes for imx7ulp
- imx8mm: Fix the first root clock in imx8mm_ahb_sels[]
- colibri_imx7: reserve DDR memory for Cortex-M4
- vining2000: fixes and convert to ethernet DM
- imx8m: fix rom version check to unbreak some B0 chips
- tbs2910: Disable VxWorks image booting support
2019-12-09 10:32:08 -05:00
Marek Vasut
edaec53212 ARM: imx: vining2000: Repair PCIe support
Ever since the conversion to DM PCI, the board was missing the PCIe DT
nodes, hence the PCI did not really work. Fill in the DT nodes and add
missing PCIe device reset.

Moreover, bring the PCIe power domain up before booting Linux. This is
mandatory to keep old broken vendor kernels working, as they do not do
so and depend on the bootloader to bring the power domain up.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Silvio Fricke <silvio.fricke@softing.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-12-06 13:57:42 +01:00
Fabio Estevam
2d4b87f867 mx7ulp: Sync the device tree related files
Sync the mx7ulp device tree related files with the one from
NXP U-Boot vendor tree (imx_v2019.04_4.19.35_1.0.0).

The mainline support for i.MX7ULP is very premature at this stage.

We should probably re-sync with mainline Linux dts when it gets
in better shape, but for now sync with the U-Boot vendor code.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-12-06 12:05:08 +01:00
David Wu
aebd9eddb3 dts: rk3308: Enable ethernet function supported for Firefly ROC_RK3308_CC
The Firefly ROC_RK3308_CC use ref_clock of input mode,
and rmii pins of m1 group.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-06 00:06:23 +08:00
David Wu
982fab393d arm: dts: Add mac node for rk3308 at dtsi level
The rk3308 only support RMII mode, and if it is output clock
mode, better to use ref_clk pin with drive strength 12ma.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-06 00:06:23 +08:00
Andy Yan
afe18f205e rockchip: px5: enable spl-fifo-mode for emmc for px5-evb
We need load some parts of ATF to sram, but rockchip
dwmmc controllers can't do dma to non-ddr addresses
space, so set the mmc controller into fifo mode in spl.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-05 23:53:07 +08:00
Andy Yan
081a51c937 rockchip: rk3308: enable spl-fifo-mode for emmc
We need load some parts of ATF to sram, but rockchip
dwmmc controllers can't do dma to non-ddr addresses
space, so set the mmc controller into fifo mode in spl.

And show my best respect to Heiko's work for this solution.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-05 23:53:07 +08:00
mingming lee
abf2c68566 ARM: MediaTek: add basic support for MT8518 boards
This adds a general board file based on MT8518 SoCs from MediaTek.

Apart from the generic parts (cpu) we add some low level init codes
and initialize the early clocks.

This commit is adding the basic boot support for the MT8518 eMMC board.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
[trini: Migrate env location to defconfig, set ENV_IS_IN_MMC]
Signeed-off-by: Tom Rini <trini@konsulko.com>
2019-12-03 12:00:03 -05:00
mingming lee
485627dd5f pinctrl: add driver for MT8518
Add Pinctrl driver for MediaTek MT8518 SoC.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2019-12-03 08:44:14 -05:00
mingming lee
13e89d7522 ARM: MediaTek: Add support for MediaTek MT8518 SoC
Add support for MediaTek MT8518 SoC. This include the file
that will initialize the SoC after boot and its device tree.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2019-12-03 08:44:14 -05:00
Patrick Delaunay
4d7d0e2e78 ARM: dts: stm32: update eMMC configuration for stm32mp157c-ev1
Update the sdmmc2 node for eMMC support on eval board stm32mp157c-ev1.
- update slew-rate for pin configuration
- update "vqmmc-supply"
- remove "st,sig-dir"
- add mandatory "pinctrl-names"
- add "mmc-ddr-3_3v"

This patch solve the eMMC detection issue for command "mmc dev 1".

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-11-26 10:11:48 +01:00
Patrick Delaunay
62d620c243 ARM: dts: stm32: DT alignment with kernel v5.4-rc4
Device tree and binding alignment with kernel v5.4-rc4

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-11-26 10:11:48 +01:00
Patrick Delaunay
e07a86b5e3 ARM: dts: stm32: DT alignment with kernel v5.3
Device tree and binding alignment with kernel v5.3
and converted to SPDX.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-11-26 10:11:48 +01:00
Tom Rini
4b19b89ca4 - add RPi4 upstream compatible to pinctrl
- fix boot banner on RPi3/4
 - add support for one binary on RPi3/4
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEUdvKHhzqrUYPB/u8L21+TfbCqH4FAl3a8R4SHG1icnVnZ2Vy
 QHN1c2UuY29tAAoJEC9tfk32wqh+AfQP/iO4qiJWUsY1WgChKl0wZNnkJKViNu6v
 F7zczCIUyI7krdVb3E3PB/ZJwXY/ay1rQeY91cU/9f0Z3yOlsoiwnEfOT/HwwkmD
 KnS6nhisqL0W1yd8sK8XaLOydIFfe05Do1UvF1JhOl3061R81fdruXygkHlgFXiK
 /hrEXLb9l0Zf4XMSD9hQJZiC/K3qeUZV1KsEdSGArjjTj3kivvS++Z0XD1YZsBVs
 rsEl3ZhPeUmzAxmg26IfyJan02NjWY+MyuoSd8QW5kVGsF4WOgvDuBOY1YJ08C/7
 NhLGkub/XhqHVSaMDwiSoX9d2z7ZqTaw7+IZW38+fCMUFAEHiErqMDq+Zfk1DKCd
 WynOzMj6k+Kli+amHQMHuUqIY54XPwpXdn671C7XbQ8xWh7HhWH/sEHP7ekrSV74
 Et7dy5fcleCcrr8EDhdC5iO2fLKhswq4iT0PbnFMtha4jhPqFVHVaAZDacucJ1/V
 JpfYRkLrmEbva3G1emve80tzlDNDxjraX8G6/6trN+F0xjorcbImp64RtRjgdL62
 DwIuba15BGR18LQJY/yHSHT4h3ReEG5qF9vxX+r6vMiFACZbnBPAP/b/REDQ6LWs
 dwW01JQ343dmZiegBQOe98fRDMGhmTd52mAJ/8p60X+byIh5I4XFKCdEdUpSVBpK
 ARrdtg9vtLxv
 =4Z+A
 -----END PGP SIGNATURE-----

Merge tag 'rpi-next-2020.01' of https://github.com/mbgg/u-boot

- add RPi4 upstream compatible to pinctrl
- fix boot banner on RPi3/4
- add support for one binary on RPi3/4
2019-11-25 12:56:27 -05:00
Matthias Brugger
5051377a0b arm: dts: bcm283x: Rename U-Boot file
Rename the file bcm283x-uboot.dtsi so that it get
automatically include through the scripts/Makefile.lib
using $(CONFIG_SYS_SOC))-u-boot.dtsi

Without this uarts and pincontroller miss the property dm-pre-reloc
and the first call to bcm283x_mu_serial_ofdata_to_platdata() fails
as the pins are not set correctly.
As a result the U-Boot banner isn't shown on boot.

Before commmit
143256b353 ("fdt: update bcm283x device tree sources to Linux 5.1-rc6 state")
we included bcm283x-uboot.dtsi directly in the device-tree file.
Which got deleted by the metioned commit.
This is a much robuster solution.

Reported-by: Tom Rini <trini@konsulko.com>
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Tested-by: Tom Rini <trini@konsulko.com> [RPi 3, 32b and 64b modes]
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-11-24 10:46:27 +01:00
Matthias Brugger
89e47e8eb6 fdt: fix bcm283x dm-pre-reloc definitions
In commmit
143256b353 ("fdt: update bcm283x device tree sources to Linux 5.1-rc6 state")
we deleted the label for the node soc from bcm283x.dtsi

As we don't need to add the property dm-pre-reloc to the soc node,
we can delete it from bcm283x-uboot.dtsi

Tested-by: Tom Rini <trini@konsulko.com> [RPi 3, 32b and 64b modes]
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-11-24 10:46:27 +01:00
Tom Rini
9a0cbae22a Merge tag 'u-boot-rockchip-20191124' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- Clean vid/pid in Kconfig and add fastboot for rk3399
- add 'u-boot, spl-fifo-mode' for mmc
- Use FIT generator for rk3229 optee and rk3368 ATF
- fan53555: add support for Silergy SYR82X and SYR83X
2019-11-23 20:50:11 -05:00
Heiko Stuebner
8019d32c47 rockchip: px30: enable spl-fifo-mode for both emmc and sdmmc on evb
As part of loading trustedfirmware, the SPL is required to place portions
of code into the socs sram but the mmc controllers can only do dma
transfers into the regular memory, not sram.

The results of this are not directly visible in u-boot itself, but
manifest as security-relate cpu aborts during boot of for example Linux.

There were a number of attempts to solve this elegantly but so far
discussion is still ongoing, so to make the board at least boot correctly
put both mmc controllers into fifo-mode, which also circumvents the
issue for now.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-11-23 23:41:44 +08:00
Ooi, Joyce
0c14bb5ad3 arm: socfpga: stratix10: Add alias for gmac0 in S10 dts
Add 'ethernet0' as alias for 'gmac0' in S10 device tree.

Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
Signed-off-by: Ooi, Joyce <joyce.ooi@intel.com>
Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-11-22 03:08:12 +01:00
Ooi, Joyce
7dad444c76 arm: dts: Stratix10: change pad skew values for EMAC0 PHY driver
The HPS EMAC0 drive strength is changed to 4mA because the initial 8mA
drive strength has caused CE test to fail. This requires changes on the
pad skew for EMAC0 PHY driver. Based on several measurements done, Tx
clock does not require the extra 0.96ns delay which was needed in
Arria10.

Signed-off-by: Ooi, Joyce <joyce.ooi@intel.com>
Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-11-22 03:08:12 +01:00
Ley Foon Tan
9184590d9a arm: dts: Stratix10: Fix memory node address and size cells
Add #address-cells and #size-cells to memory node to fix incorrect memory
size decoding in recent Uboot version.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-11-20 22:32:00 +01:00
Tom Rini
fffb826ea0 - fix i.MX6ULL evk black screen observed while reboot stress tests
- remove "synopsys,dw-mipi-dsi" compatible to reduce the device tree
   differences between Linux and U-Boot for stm32mp1 platform
 -----BEGIN PGP SIGNATURE-----
 
 iGwEABECACwWIQSC4hxrSoIUVfFO0kRM6ATMmsalXAUCXdJyOg4cYWd1c3RAZGVu
 eC5kZQAKCRBM6ATMmsalXOmuAJ9lF7GyPpv0vZNX1V4UV2EyyOOdbwCfQzHu3Xo+
 3VWLV9ZHkVMlfnGbbx0=
 =+YuG
 -----END PGP SIGNATURE-----

Merge tag 'video-for-v2020.01-rc2' of https://gitlab.denx.de/u-boot/custodians/u-boot-video

- fix i.MX6ULL evk black screen observed while reboot stress tests
- remove "synopsys,dw-mipi-dsi" compatible to reduce the device tree
  differences between Linux and U-Boot for stm32mp1 platform
2019-11-18 10:48:29 -05:00
Tom Rini
d64efd920e Merge tag 'u-boot-rockchip-20191118' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- Add support for rockchip SoC: PX30, RK3308
- Add and migrate to use common dram driver: PX30, RK3328, RK3399
- Add rk3399 board Tinker-s support
- Board config update for Rock960, Rockpro64
2019-11-17 21:15:57 -05:00
Michael Trimarchi
59b01eb7a1 rockchip: dts: tinker: Add tinker-s board support
Support tinker-s board. The board is equivalent of tinker board
except of emmc.

TODO:
- support of usb current burst when the board is powered from pc

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 18:51:25 +08:00
Michael Trimarchi
b40abe3369 rockchip: dts: tinker: Move u-boot dmc initialization to specific section
dmc is used to initialize the memory controller. It's needed by
u-boot. Move it in the specific section

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 18:51:25 +08:00
Andy Yan
9ce3de1b18 rockchip: rk3308: Add dts for ROC-RK3308-CC
Add dts file for ROC-RK3308-CC from firefly.

Sync form linux rockchip for v5.5-armsoc/dts64:
"arm64: dts: rockchip: Add devicetree for board roc-rk3308-cc"
(sha1: 4403e1237be3af0977aa23ef399e3496316317a0)

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 17:22:53 +08:00
Andy Yan
22dcd28150 arm: dts: rockchip: Add dts for rk3308 evb
Add dts for rk3308 evb, sync from the linux kernel
upstream list [0].

[0]https://patchwork.kernel.org/patch/11201555/

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 17:22:53 +08:00
Kever Yang
7acd030210 rockchip: rk3399: orangepi: Add init value for vdd_log
We should set the init value when vdd_log is enabled, or else the
vdd_log output voltage may not in soc required range.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 17:22:53 +08:00
Kever Yang
4d273ff304 rockchip: rk3399: khadas-edge: Add init value for vdd_log
We should set the init value when vdd_log is enabled, or else the
vdd_log output voltage may not in soc required range.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 17:22:53 +08:00
Kever Yang
8dda40ec51 rockchip: rk3399: rock-pi4: Add init value for vdd_log
We should set the init value when vdd_log is enabled, or else the
vdd_log output voltage may not in soc required range.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 17:22:53 +08:00
Kever Yang
f9f68ea747 arm64: dts: rk3399-rock960: add vdd_log and its init value
Add vdd_log node according to rock960 schematic V13.
This patch affect two boards:
- Rock960 Model A
- Ficus

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-11-17 17:22:53 +08:00
Peter Robinson
267b6adf63 rockchip: dts: rk3399-firefly: move u-boot, spl-boot-order to to the u-boot.dtsi
The u-boot specific device tree directives should be in u-boot.dtsi

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 17:22:53 +08:00
Peter Robinson
e7505d06bd rockchip: dts: rk3399-evb: move u-boot, spl-boot-order to to the u-boot.dtsi
The u-boot specific device tree directives should be in u-boot.dtsi

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 17:22:53 +08:00
Peter Robinson
f459e23ec0 rockchip: dts: rk3399: move the u-boot, dm-pre-reloc to the u-boot.dtsi
The u-boot specific pieces in the dts files should be in u-boot.dtsi
not the main files, this allows easier sync with upstream. The
rk3399.dtsi has a mix of both so move them all for consistency.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
(Fix with missing pmugrf)
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 17:22:53 +08:00
Soeren Moch
f210cbc1f3 arm: dts: rk3399-rockpro64: slightly increase center voltage
The rk3399 VD_CENTER voltage domain is not subject to dynamic voltage
scaling. So the regulator reset voltage of 0.9V is used on this board.
Let u-boot initialize the center voltage to 0.95V as it is done for the
VD_LOGIC domain. This avoids instability and occasional linux kernel
Opses on this board.

Signed-off-by: Soeren Moch <smoch@web.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 17:22:53 +08:00
Soeren Moch
5824ad3453 arm: dts: rk3399-rockpro64: sync dts from linux kernel
The most important change for u-boot is the fix for the vdd-log pwm
voltage regulator to avoid overvoltage for the VD_LOGIC power domain.

Signed-off-by: Soeren Moch <smoch@web.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 17:22:53 +08:00
Jagan Teki
37f4e531d7 arm: dts: rk3399-roc-pc: Sync latest dts changes from Linux
Few important regulator power rails fixes are available in
linux-next, so sync them same.

Here is the last commit details:
commit <9f7f9b610e1b7d2dc86c543ab0dfcf781bd42326> ("arm64: dts:
rockchip: Fix roc-rk3399-pc regulator input rails")

Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Levin Du <djw@t-chip.com.cn>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 17:22:53 +08:00
Heiko Stuebner
537b1a2774 rockchip: add px30 devicetrees
Add px30 related devicetrees synced from the Linux kernel.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 17:23:20 +08:00
YouMin Chen
a922d0d102 ram: rk3399: migrate to use common code
For there are some structures and functions are common for all rockchip SoCs,
migrate to use the common code so that we can clean up reduandent codes.

Signed-off-by: YouMin Chen <cym@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 16:23:56 +08:00
YouMin Chen
ca93e32139 ram: rk3328: use common sdram driver
RK3328 has a similar controller and phy with PX30, so we can use the
common driver for it and remove the duplicate codes.

Signed-off-by: YouMin Chen <cym@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-17 16:23:56 +08:00
Baruch Siach
70bae02f71 arm: mvebu: clearfog: fix boot from SD card
Enable gpio0 in SPL to allow the sdhci driver read the SD card-detect
signal.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-11-14 08:28:39 +01:00
Patrick Delaunay
754815b854 video: stm32: remove the compatible "synopsys, dw-mipi-dsi" support
Remove the compatible "synopsys,dw-mipi-dsi" added in U-Boot
(it don't exist in Linux kernel binding); it is only used
to bind the generic synopsys UCLASS_DSI_HOST "dw_mipi_dsi" to
the driver "stm32-display-dsi" UCLASS_VIDEO_BRIDGE

This binding is done in Linux kernel drivers without compatible
(dw_mipi_dsi_bind() is called in bind of driver, for example in
drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c).

This patch does the same in U-Boot driver, the STM32 driver
calls during its bind the function device_bind_driver_to_node
to bind the generic driver "dw_mipi_dsi" at the same address.

This patch reduces the device tree differences
between Linux kernel and U-Boot for stm32mp1 platform.

Tested with v2020.01-rc1 on STM32MP157C-EV1 and STM32MP157C-DK2.

The dependency of driver is clearer and the probe order is guaranteed.

STM32MP> dm tree
 Class     Index  Probed  Driver                Name
-----------------------------------------------------------
 root          0  [ + ]   root_driver           root_driver
 sysreset      0  [   ]   syscon_reboot         |-- reboot
 simple_bus    0  [ + ]   generic_simple_bus    |-- soc
 serial        0  [ + ]   serial_stm32          |   |-- serial@40010000
...
 video_brid    0  [ + ]   stm32-display-dsi     |   |-- dsi@5a000000
 dsi_host      0  [ + ]   dw_mipi_dsi           |   |   |-- dsihost
 panel         0  [ + ]   rm68200_panel         |   |   `-- panel-dsi@0
...

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-11-12 16:15:53 +01:00
Tom Rini
5f7ff6d63e u-boot-imx-20191105
-------------------
 i.MX8MN SoC support
 ROM API image download support
 i.MX8MM enet enabling
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl3BmLkPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3oVwL/2Z7kCMCjudXNjXqJFSVsCizuzaxkYvUDQCK
 g8+P7pdci/xZz8pVvVD5zmpZGRM2hu+7hFQwIlSu7anlRqdW+9cZCAJoeq/4A29c
 TkI3w99R0xTDGFlip0zM4vKlQXmC0I0LYbJPVDLjN+zNkhL6QNS3QptONw/3xPzr
 Vj5+eztasl5JOnkTFE8yZkfbkekgPbO4h43oje5XwRdRQcwzo4qEFZcxZzvucz39
 0RXyvu5qtXvSeVYApXeYcnBD3Mn4rjq26rfn2EEntkO0FbhYBHBjwx3/ozmUaOFR
 7AtNyZZSAZFe03egfX6+ODx7tuOTA0PK1LLdogMjLDrOd70px+P7wxY9QZV6hKw9
 TC4YlboZK2bjsPyOwIraTWVUvU9YjQzlPT0SYjyIono33Av1Um7RDvp+XeyG7VPC
 AYE6luZwhauYNUaGegFPexDxOSRqeAiTLx3kOOeHb4Vb4KkJu4Np7Pma2uiqI00V
 4TpWJwhqQPn7lo/N1X9ymBx6iNvt2Q==
 =sgCz
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20191105' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20191105
-------------------
i.MX8MN SoC support
ROM API image download support
i.MX8MM enet enabling
2019-11-12 07:18:23 -05:00
Tom Rini
086e391bc4 Merge tag 'u-boot-rockchip-20191110' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- Add support for rockchip pmic rk805,rk809, rk816, rk817
- Add rk3399 board Leez support
- Fix bug in rk3328 ram driver
- Adapt SPL to support ATF bl31 with entry at 0x40000
- Fix the u8 type comparision with '-1'.
- Fix checkpatch warning for multi blank line and review signature.
2019-11-11 14:19:32 -05:00
Tom Rini
0b73ef0c02 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- Rename CONFIG_SECURE_BOOT to CONFIG_NXP_ESBC.
- Few bug fixes and updates related to SPI, hwconfig, ethernet,
  fsl-layerscape, pci, icid, PSCI
2019-11-11 14:19:04 -05:00
Emmanuel Vadot
b5500b2057 rockchip: dts: rk3328: rock64: Add same-as-spl order
rk3328 can use same-as-spl option so next loaders are loaded from the same
medium.
Add the boot order in the rock64 dts otherwise booting from sdcard
will result in u-boot looking into the eMMC.

Signed-off-by: Emmanuel Vadot <manu@freebsd.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10 20:40:20 +08:00
Andy Yan
a4bbc662fc rockchip: rk3399: Add Leez P710 support
Specification
- Rockchip RK3399
- LPDDR4
- TF sd scard slot
- eMMC
- M.2 B-Key for 4G LTE
- AP6256 for WiFi + BT
- Gigabit ethernet
- HDMI out
- 40 pin header
- USB 2.0 x 2
- USB 3.0 x 1
- USB 3.0 Type-C x 1
- TYPE-C Power supply

Commit details of rk3399-leez-p710.dts sync from linus tree for Linux 5.4-rc1:
"arm64: dts: rockchip: Add dts for Leez RK3399 P710 SBC"
(sha1: 	fc702ed49a8668a17343811ee28214d845bfc5e6)

Signed-off-by: Andy Yan <andyshrk@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10 20:40:20 +08:00
Tom Rini
ee1c499851 Merge branch '2019-11-07-master-imports'
- Add Phytium Durian Board
- Assorted bugfixes
- Allow for  make ERR_PTR/PTR_ERR architecture specific
2019-11-08 07:27:45 -05:00
Mathew McBride
b50fe3fb7e armv8: dts: ls1088a: add PSCI binding for LS1088A
This allows the use of PSCI calls to trusted firmware to
initiate reset and poweroff events with CONFIG_PSCI_RESET and
CONFIG_ARM_PSCI_FW. This is desirable, for example, if the target
board has implemented a custom reset or poweroff procedure in EL3.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-08 11:13:38 +05:30
Adam Ford
899836c315 ARM: dts: logicpd-som-lv-37xx-devkit-u-boot: Remove unused GPIO
The only GPIO bank needed in SPL is GPIO4 and the SPL space is tight.

This patch removes the all but GPIO4 from the spl device tree to
reduce the SPL footprint.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-11-07 18:39:18 -05:00
Adam Ford
1e3d015a03 ARM: dts: logicpd-torpedo-37xx-devkit-u-boot: Remove unused GPIO
The only GPIO bank needed in SPL is GPIO4 and the SPL space is tight.

This patch removes the all but GPIO4 from the spl device tree to
reduce the SPL footprint.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-11-07 18:39:18 -05:00
Keerthy
2f71498d52 arm: dts: k3-j721e-r5-common-proc-board: Hook buck12_reg to vtm supply
Hook buck12_reg to vtm avs supply

Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07 18:39:17 -05:00
Keerthy
0f63ceaf54 arm: dts: k3-j721e-r5-common: Add tps65941 node and dependent wkup_i2c0 node
Add tps65941 node and dependent wkup_i2c0 node needed for AVS class 0 support

Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07 18:39:17 -05:00
Keerthy
69eceae870 arm: dts: k3-j721e-r5-common-proc-board: Add VTM node
Add VTM node for voltage and thermal management. For u-boot, this is needed
for supporting AVS class 0, as the efuse values for the OPPs are stored
under the VTM.

Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07 18:39:17 -05:00
Tero Kristo
56adc6615f arm: dts: k3-am654-r5-base-board: enable wkup_vtm0 node and link in supplies
Link the vdd-supplies for the voltage domains under the VTM node. Also,
enable the node under SPL. This will enable the AVS class 0 support on
am65x-evm board.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07 18:39:17 -05:00
Tero Kristo
c5f73d1c9f arm: dts: k3-am654-r5-base-board: add supply rail for MPU
MPU voltage on AM65x-evm is controlled via the TPS62363 chip attached
to i2c0 bus. Add device node for this so that it can be controlled via
a regulator driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07 18:39:17 -05:00
Tero Kristo
4bbb3849aa arm: dts: k3-am654-r5-base-board: enable wkup_i2c0 driver for spl
Enable wkup_i2c0 as this is needed for voltage control.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07 18:39:17 -05:00
Keerthy
cfa6bd549c arm: dts: k3-am654-r5-base-board: Add VTM node
Add VTM node for voltage and thermal management. For u-boot, this is needed
for supporting AVS class 0, as the efuse values for the OPPs are stored
under the VTM.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-11-07 18:39:17 -05:00
liu hao
e3aafef4cf arm: add initial support for the Phytium Durian Board
This adds platform code and the device tree for the Phytium Durian Board.
The initial support comprises the UART and the PCIE.

Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>

Signed-off-by: Steven Hao <liuhao@phytium.com.cn>
2019-11-07 18:01:13 -05:00
Peng Fan
bdcf3a88cc imx: imx8mm-evk: enable ethernet
add phy-reset-gpios to reset phy
Add board_phy_config to configure phy
Enable DM_ETH

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05 10:27:18 +01:00
Peng Fan
98bcf9a5df arm: dts: imx8mm: drop assigned clocks for clk node
Drop assigned clocks for clk node, this will break boot on i.MX8MM EVK
board.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05 10:27:18 +01:00
Peng Fan
d239d9d946 imx: add i.MX8MN DDR4 board support
Support pinctrl/clk/sdhc, include ddr4 timing data.

Log:
U-Boot SPL 2019.10-rc3-00356-g497c500423-dirty (Sep 16 2019 - 10:54:58 +0800)
Normal Boot
Trying to boot from BOOTROM
image offset 0x8000, pagesize 0x200, ivt offset 0x0

U-Boot 2019.10-rc3-00356-g497c500423-dirty (Sep 16 2019 - 10:54:58 +0800)

CPU:   Freescale i.MX8MNano rev1.0 at 24 MHz
Reset cause: POR
Model: NXP i.MX8MNano DDR4 EVK board
DRAM:  2 GiB
MMC:   FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Hit any key to stop autoboot:  0

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05 10:27:18 +01:00
Peng Fan
dadb072f12 imx: add dtsi for i.MX8MN
Add dtsi for i.MX8MN

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05 10:27:18 +01:00
Peng Fan
2634ba5743 arm: dts: imx8qm-mek: add u-boot, dm-spl for lpuart0
lpuart0 is the uart used by SPL and U-Boot proper, and DM_SERIAL
is enabled. Since uclass power domain is also enabled, to make
lpuart work properly, need add u-boot,dm-spl for lpuart power domain
and its parent.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05 10:27:18 +01:00
Peng Fan
c1a64dccc0 arm: dts: imx8qxp-mek: add u-boot, dm-spl for lpuart0
lpuart0 is the uart used by SPL and U-Boot proper, and DM_SERIAL
is enabled. Since uclass power domain is also enabled, to make
lpuart work properly, need add u-boot,dm-spl for lpuart power domain
and its parent.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05 10:27:18 +01:00
Peng Fan
84abc8d533 imx8qm: mek: enable dm-spl for pm
with u-boot,dm-spl added for imx8qm-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05 10:27:18 +01:00
Tom Rini
73b6e6ad25 u-boot-imx-20191104
-------------------
 
 - i.MX NAND: nandbcb support for MX6UL / i.MX7
 - i.MX8: support for HAB
 - Convert to DM (opos6ul, mccmon6)
 - Toradex i.MX6ull colibri
 - sync DTS with kernel
 
 Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/606853416
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl2/6YYPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3qSAL/37iSxotpJEcvCcAg0x96n6na/O0SjT3NkoT
 glPaFXLkzR7hbK5yR3g2P0LuNGRGkCQbuz61Hn4wNLRySVodvIJ1pUITu9GaLnex
 graG/ssqdPMEWU0LDoatr/fgoCQo7DEKOuzRmvHAYus7LZJ6edctOyTXuiMhPZ+T
 DJ51RAUq11CleuA8nnz/iV2WCR8pw9sPS7P016lrDF+sWLIqm+/UMnwiIUV4KVhI
 og/fevJfE52vOdV1the6xgpffQGICckNUFREgXaPo3JsP67icPiUGQ4RiFhHp+ff
 rNyMdD/g6YZOoMoWda989h0l3gBwKjBQ9eGG05V8GEmyxzzkOGa5So2O9NzG90CQ
 vcOlEsC/siNZ87B5VkVkWjmrEnHcICtAFJSSntC7pLxtQMMqMbioRe5w+zmSrWeH
 GYh9cxe3ABLYBxISrT6BTfyXs0cD5tMl6D9snLaGyUzHcH2AGkVTkVabemuMSpIZ
 kBzNRFmx3+3Ync+CoaLA+G1YRXmgSw==
 =zlN+
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20191104' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20191104
-------------------

- i.MX NAND: nandbcb support for MX6UL / i.MX7
- i.MX8: support for HAB
- Convert to DM (opos6ul, mccmon6)
- Toradex i.MX6ull colibri
- sync DTS with kernel

Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/606853416
2019-11-04 12:57:41 -05:00
Oliver Graute
eef72440db imx: support i.MX8QM ROM 7720 a1 board
Add i.MX8QM ROM 7720a1 board support

Boot log as below:
U-Boot 2019.10-rc3-00004-gd073e0242f (Sep 20 2019 - 08:24:13 +0200)

CPU:   NXP i.MX8QM RevB A53 at 1200 MHz

Model: Advantech iMX8QM Qseven series
Board: ROM-7720-A1 4GB
Build: SCFW 65afe5f6
Boot:  SD2
DRAM:  4 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial@5a060000
Out:   serial@5a060000
Err:   serial@5a060000
Net:   eth0: ethernet@5b040000Could not get PHY for FEC1: addr 1
, eth-1: ethernet@5b050000
Hit any key to stop autoboot:  0

Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
2019-11-03 21:18:00 +01:00
Peng Fan
387c44904d arm: dts: imx8mm: sync dts from Linux Kernel
Sync dts for i.MX8MM from Linux Kernel 5.4.0-rc1

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 21:18:00 +01:00
Hannes Schmelzer
c04ac5bd40 board/BuR/brppt2: initial commit
This commit adds support for the brppt2 board. The board is based on the
i.mx6 dual-lite SoC.

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-11-03 21:17:55 +01:00
Peng Fan
8c61eba03d imx8mm: evk: enable bd71837 pmic
Enable bd71837 pmic for i.MX8MM EVK board, need to set voltage for
DRAM and linux suspend voltage requirement.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 17:04:16 +01:00
Sébastien Szymanski
b1be79b417 opos6uldev: migrate to DM_VIDEO
Migrate to DM_VIDEO, update the device tree and remove code that is no
longer necessary.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2019-11-03 17:04:16 +01:00
Patrick Wildt
05737f3585 imx: update i.MX8MQ device trees
This updates the i.MX8MQ device trees and, necessarily, also the
i.MX8MQ clock bindings.  These are taken verbatim from from the
Linux kernel version v5.4-rc2, which three small changes which
were already part of the previous device tree:

 * Keep the PSCI reserved memory range
 * Keep the alias for ethernet, so that the MAC address can be set
 * Keep the modified #include for the IOMUXC pins

Signed-off-by: Patrick Wildt <patrick@blueri.se>
Acked-by: Peng Fan <peng.fan@nxp.com>
2019-11-03 17:04:16 +01:00
Lukasz Majewski
8e64181a99 ARM: imx: Convert mccmon6 to use DM/DTS in the u-boot proper
This commit converts mccmon6's u-boot proper (in a single commit to avoid
build breaks) to use solely DM/DTS.

The DTS description of the mccmon6 has been ported from Linux kernel
(v4.20, SHA1: 8fe28cb58bcb235034b64cbbb7550a8a43fd88be)

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-11-03 17:04:16 +01:00
Lukasz Majewski
f6a4df3846 imx: Enable RTC (ds1307) support in the U-Boot proper on TPC70 board
The TPC70 is equipped with DS1307 RTC device. Add code to enable support
for it.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-11-03 17:04:16 +01:00
Igor Opaniuk
6b4339d312 ARM: dts: imx6ull-colibri: pre-reloc for uart pinmux modes
Add u-boot,dm-pre-reloc properties for uart pinmux configuration
nodes, which enables UART as early as possible (before relocation).

Without this we miss almost the half of output (U-boot version,
CPU defails, Reset cause, DRAM details etc.).

Fixes: cd69e8ef9b ("colibri-imx6ull: migrate pinctrl and regulators to dtb/dm")
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-11-03 17:04:16 +01:00
Igor Opaniuk
7d6ca12313 ARM: dts: imx6ull-colibri: change hierarchy of DTS files
Introduce imx6ull-colibri-u-boot.dtsi for u-boot specific properties to
keep original imx6ull-colibri.dts in sync with Linux.

Move all contents of imx6ull-colibri.dts to imx6ull-colibri.dtsi +
additionally fix checkpatch warnings.

Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-11-03 17:04:16 +01:00
Manivannan Sadhasivam
7f8a6a66af arm: dts: Add devicetree support for iMXQXP AI_ML board
Add devicetree support for iMXQXP AI_ML board from Einfochips.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-11-03 17:04:16 +01:00
Grygorii Strashko
3b3e8a37d3 arm: dts: am335x: sync cpsw/mdio/phy with latest linux - drop phy_id
Synchronize CPSW/MDIO/PHY DT nodes with latest linux - replace deprecated
phy_id property with phy-handle.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Felix Brack <fb@ltec.ch>
Cc: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-11-03 09:15:46 -05:00
Grygorii Strashko
b1fe4fe330 arm: dts: am437x: sync cpsw/mdio/phy with latest linux - drop phy_id
Synchronize CPSW/MDIO/PHY DT nodes with latest linux - replace deprecated
phy_id property with phy-handle.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
2019-11-03 09:15:46 -05:00
Grygorii Strashko
68d875da4c arm: dts: dra7: sync cpsw/mdio/phy with latest linux - drop phy_id
Synchronize CPSW/MDIO/PHY DT nodes with latest linux - replace deprecated
phy_id property with phy-handle.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
2019-11-03 09:15:46 -05:00
Tom Rini
cc64810dc6 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-sunxi
- H6 dts(i) sync (Clément)
- H6 PIO (Icenowy)
- Fix pll1 clock calculation (Stefan)
- H6 dram, half DQ (Jernej)
- A64 OLinuXino eMMC (Sunil)
2019-10-30 09:04:52 -04:00
Tom Rini
15147dc6a9 Merge branch '2019-10-24-ti-imports'
- Enable DFU on dra7xx boards
- Further Keystone 3 platform improvements
2019-10-25 17:33:28 -04:00
Suman Anna
d0e134b909 arm: dts: k3-am65: Add R5F ranges in interconnect nodes
Add the address spaces for the R5F cores in MCU domain to the ranges
property of the cbass_mcu interconnect node so that the addresses
within the R5F nodes can be translated properly by the relevant OF
address API.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-25 17:33:21 -04:00
Lokesh Vutla
ec2fa9f76e arm: dts: k3-j721e: Add ddr node
Use the 3733MTs DDR configuration that is auto generated from
DDR_Regconfig tool.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Kevin Scholz <k-scholz@ti.com>
2019-10-25 17:33:21 -04:00
James Doublesin
34f27b2e86 ram: k3-am654: Do not rely on default values for certain DDR register
Added the following registers to the DDR configuration:
- ACIOCR0,
- ACIOCR3,
- V2H_CTL_REG,
- DX8SLxDQSCTL.

Modified enable_dqs_pd and disable_dqs_pd to only touch the associated
bit fields for pullup and pulldown registers (to preserve slew rate and
other bits in that same register). Also update the dts files in the same
patch to maintain git bisectability.

Signed-off-by: James Doublesin <doublesin@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-25 17:33:21 -04:00
James Doublesin
d5e08fd204 armv7r: dts: am654-base-board: Rename 1600MHz to 1600MTs in dtsi filename
The current configuration of DDR on AM654 base board is for 1600MTs but
the file name is specified as k3-am654-base-board-ddr4-1600MHz.dtsi.
Since 1600MHz is misleading, rename it to
k3-am654-base-board-ddr4-1600MTs.dtsi

Signed-off-by: James Doublesin <doublesin@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-25 17:33:21 -04:00
Faiz Abbas
6b23f53b08 ARM: dts: dra7: Add usb peripheral nodes in spl
Add usb peripheral and usb phy nodes in spl to enable SPL_DFU bootmode.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-25 17:33:21 -04:00
Tom Rini
271103ac0b Merge branch 'master' of git://git.denx.de/u-boot-usb
- DWC3 improvements
- i.MX7 EHCI bugfix
2019-10-25 13:50:51 -04:00
Tom Rini
c9e50bb12a Second set of u-boot-atmel features and fixes for 2020.01 cycle
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdspnqAAoJEB6zHgIOrC/Ixi4IAJEEiCZPu6Z3fbkFX/Um7vCX
 eMTltJN8nz4oiSi3xdx3ejueqWdW3F8VuCkHb0j0bVAhMlUlVgwCzfd0cD+D2iwS
 jkrgzASNAr+JeYKYEdWqqfaUxOCd2qfuBu9EXlpvKQLWLt+KRfsOsHWcgR4bf095
 aGCihvd/fKhKYUvbf5cEQnsWa3UwtsKk4Web5MKjxXx3p0iVNlu4KLd/vDWfTios
 X1NqiO5ZjXNrDxyG6Aj8lgDXlE5kfeKaN/aCJU1/0U2cXm8JRu2w2dv1P/e/kU+j
 NHIGzICAG4Lk/4gQTeuohJxLyvj7K3i1H12ik9Qeh4H1/5fsyybyltGUo7H443s=
 =JYe3
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-atmel-2020.01-b' of https://gitlab.denx.de/u-boot/custodians/u-boot-atmel

Second set of u-boot-atmel features and fixes for 2020.01 cycle

This feature set includes Eugen's work on a new tiny flexcom driver and
eeprom mac retrieval for the sam9x60-ek board.
2019-10-25 13:50:33 -04:00
Tom Rini
e382713d22 Xilinx/FPGA changes for v2020.01 part 2
common:
 - Fix manual relocation for repeatable commands
 
 arm:
 - Also clean up generated dtbos
 
 microblaze:
 - Add support for Manual relocation in crypto framework
 - Tune and align architecture bootm support
 
 zynq:
 - DT sync ups
 - Some defconfig updates
 - Remove empty board_early_init_f()
 
 zynqmp:
 - Clean firmware handing via drivers/firmware/
 - DT/defconfig name alignments
 - DT cleanups with using firmware based clock driver
 - Some defconfig updates
 - Add IIO ina226 DT description
 - Tune zynqmp_psu_init_minimalize.sh script
 - Add single nand mini configuration, e-a2197, m-a2197-02/03 and zcu216
 
 versal:
 - Clean firmware handing via drivers/firmware/
 - Add gpio support
 - Enable DT overlay/USB/CLK/FPGA
 - DT updates
 - Tune mini configuration
 
 spi:
 - gqspi - Remove unused headers
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXbKa4QAKCRDKSWXLKUoM
 ISzJAJ0YpGS7HziGFVRBlcsyRH8QlWCqOQCfb0jIWzhL8pvj9TA01CdU0Axdbwk=
 =GIpp
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2020.01-part2' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx/FPGA changes for v2020.01 part 2

common:
- Fix manual relocation for repeatable commands

arm:
- Also clean up generated dtbos

microblaze:
- Add support for Manual relocation in crypto framework
- Tune and align architecture bootm support

zynq:
- DT sync ups
- Some defconfig updates
- Remove empty board_early_init_f()

zynqmp:
- Clean firmware handing via drivers/firmware/
- DT/defconfig name alignments
- DT cleanups with using firmware based clock driver
- Some defconfig updates
- Add IIO ina226 DT description
- Tune zynqmp_psu_init_minimalize.sh script
- Add single nand mini configuration, e-a2197, m-a2197-02/03 and zcu216

versal:
- Clean firmware handing via drivers/firmware/
- Add gpio support
- Enable DT overlay/USB/CLK/FPGA
- DT updates
- Tune mini configuration

spi:
- gqspi - Remove unused headers
2019-10-25 11:23:46 -04:00
Clément Péron
cf05b4b86c arm: dts: sync dts for Allwinner H6
Sync Kernel DTS for Allwinner H6 boards.

Drop /omit-if-no-ref/ keyword as it's not supported by U-boot.

commit <d45331b00ddb> Linux 5.3-rc4

Signed-off-by: Clément Péron <peron.clem@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-10-25 14:40:25 +05:30
Sunil Mohan Adapa
4ed293ae79 arm64: dts: sun50i: Add support for A64 OLinuXino (with eMMC)
A64 OLinuXino board from Olimex has three variants with onboard eMMC:
A64-OLinuXino-1Ge16GW, A64-OLinuXino-1Ge4GW and A64-OLinuXino-2Ge8G-IND. In
addition, there are two variants without eMMC. One without eMMC and one with SPI
flash. This suggests the need for separate device tree for the three eMMC
variants.

The Linux kernel upstream has chosen to create and use a separate device tree
for the eMMC variants instead of adding eMMC support existing device tree. These
changes to Linux kernel are queued for Linux 5.4.

commit <02bb66b347ff8115f53948f86b884e008ba385b9> ("arm64: dts:
allwinner: a64: Add A64 OlinuXino board (with eMMC)")

This patch has been tested on A64-OLinuXino-1Ge16GW and is based on Linux
device-tree and a64-olinuxino_defconfig.

Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
[jagan: updated linux-next commit details]
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-10-25 14:15:49 +05:30
Jagan Teki
f8cb77ffba configs: sopine-baseboard: Enable SPI-FLASH
SoPine has winbond SPI-FLASH, so enable the same in defconfig
and add aliases for spi0 in -u-boot.dtsi

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-10-25 00:48:31 +05:30
Tom Rini
17fd9915a4 Merge branch '2019-10-24-UFS-support'
- Add Universal Flash Storage (UFS) support
2019-10-24 09:51:48 -04:00
Michal Simek
6bf27ed9ae arm64: zynqmp: Add support for e-a2197-00 System Controller
Add support for System Controller available on e-a2197-00 base board.
System is very similar to p-a2197-00 board.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:03 +02:00
Michal Simek
dd7a3291cc arm64: zynqmp: Add support for zcu216
zcu104/6 defconfig was used as source. Standard features are enabled.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:03 +02:00
Michal Simek
3d5c9060c5 arm64: zynqmp: Add support for m-a2197-03
It is based on m-a2197-01 with some changes in i2c intrastructure.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:03 +02:00
Michal Simek
137c4aef0c arm64: zynqmp: Add support for m-a2197-02
It is based on m-a2197-01 with some changes in i2c intrastructure.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:03 +02:00
Michal Simek
2038e46f48 arm64: zynqmp: List lpd watchdog in dtsi
There are use cases where lpd watchdog can be configured for APU use. By
design this IP should be listed in zynqmp.dtsi to make sure that node is
properly enabled by DTG.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:03 +02:00
Michal Simek
332996ce18 arm64: zynqmp: Use power header in zynqmp.dtsi
Use power header and add power-domains property.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:03 +02:00
Michal Simek
b07e97b4ba arm64: zynqmp: Use reset header in zynqmp.dtsi
Wire reset-controller and use macros from reset header.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
dead6f67c7 arm64: zynqmp: Use backward compatible string for gem
Add backward compatible string for gem ("cdns,gem").

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
039c740d66 arm64: zynqmp: Switch to xlnx-zynqmp-clk header
Use prepared header instead of hardcoded values.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Naga Sureshkumar Relli
c3a34b8006 arm64: zynqmp: Update nand device tree node properties
This patch updates the nand device tree node properties as per
updated driver.

Signed-off-by: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
631ed92a30 arm64: zynqmp: Fix DT style for ipi mailbox
Remove additional empty space.

Fixes: 95497afada ("arm64: zynqmp: add firmware and mailbox node to DT")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
62e3fb027b ARM: dt: Also clean dtbo files
dtbo files can be also generated that's why also clean them.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
c126ba4f43 arm64: versal: Fix sdhci node address for versal-mini-emmc1
Add missing trailing 0 to mach node name address with reg property.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
f5c48644ba arm64: zynqmp: Enable iio-hwmon for ina226 on zcu100
ina226 hwmon driver is deprecated and it is recommended to use new iio
based driver. The patch is enabling iio-hwmon driver to export
functionality from IIO to hwmon interface to be able to use lm-sensors
package.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
db2d622cb2 arm64: zynqmp: Turn comment to gpio-line-names
Label gpio lines properly.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
003170e74d arm64: zynqmp: Add label property to all ina226 on zcu102
Label property is adding capability to distiguish chips from each other
when iio framework is used.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
faddcbe7d7 arm64: zynqmp: Enable iio-hwmon for ina226 on zcu102
ina226 hwmon driver is deprecated and it is recommended to use new iio
based driver. The patch is enabling iio-hwmon driver to export
functionality from IIO to hwmon interface to be able to use lm-sensors
package.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Harini Katakam
26b2c68b61 arm64: zynqmp: dt: Add optional gpio phy reset properties
Add gpio phy reset via I2C expander TCA6416 on board ZCU102.
A warning call trace is observer in probe when this reset is called
from context that can sleep. Keep this commented until that is
resolved in phylib.

Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Harini Katakam
631d9a9981 arm64: zynqmp: dt: Add missing DP83867 quirk
The DP83867 strap control workaround is already present in Linux kernel
mainline binding. All these Xilinx boards require this quirk.

Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
0ae57b34f0 arm64: zynqmp: Enable fpd_dma for zcu104 platforms
Enable fpd_dma for these boards.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
3d82d7167f arm64: zynqmp: Enable iio-hwmon for ina226 on zcu104
ina226 hwmon driver is deprecated and it is recommended to use new iio
based driver. The patch is enabling iio-hwmon driver to export
functionality from IIO to hwmon interface to be able to use lm-sensors
package.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
5c09709475 arm64: zynqmp: Add label property to all ina226 on zcu106
Label property is adding capability to distiguish chips from each other
when iio framework is used.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
777c4d69cb arm64: zynqmp: Enable iio-hwmon for ina226 on zcu106
ina226 hwmon driver is deprecated and it is recommended to use new iio
based driver. The patch is enabling iio-hwmon driver to export
functionality from IIO to hwmon interface to be able to use lm-sensors
package.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Venkatesh Yadav Abbarapu
7e2bf38768 arm64: zynqmp: Fix the si570 clock frequency on zcu111
The si570 clock frequency should be 156.25MHz as per datasheet.

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
b02ea93137 arm64: zynqmp: Add label property to all ina226 on zcu111
Label property is adding capability to distiguish chips from each other
when iio framework is used.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:02 +02:00
Michal Simek
65c4c3773b arm64: zynqmp: Enable iio-hwmon for ina226 on zcu111
ina226 hwmon driver is deprecated and it is recommended to use new iio
based driver. The patch is enabling iio-hwmon driver to export
functionality from IIO to hwmon interface to be able to use lm-sensors
package.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
T Karthik Reddy
bdbc5604f2 arm64: zynqmp: dt: Delete no-1-8-v property from zcu102-rev1.0
Currently zcu102 Rev1.0 board includes RevA sdhci dt node which has
no-1-8-v property. Since Rev1.0 has level shifters delete this
property to enable support for 1.8v.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Michal Simek
5dc8f69df3 arm64: zynqmp: Remove fixme about memory size on zynqmp-p-a2197
System controller has 2GB of memory and fixme can be removed now.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Michal Simek
bdd368afda arm64: zynqmp: Sync si570 setup and clock names
Setup proper si570 names and default factory setup.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Michal Simek
2703d4b42d arm64: zynqmp: Fix m-a2197-01 DT based on latest schematics
Remove some FIXMEs and align it with latest schematics.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Michal Simek
b954e88968 arm64: zynqmp: Switch spi-flash to jedec,spi-nor on m-a2197
Mainline has done this switch and there is no reason not to switch it too.

Mainline U-Boot patch which has done that switch:
"dts: switch spi-flash to jedec, spi-nor compatible"
(sha1: ffd4c7c2ec)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Michal Simek
33aaa0932e arm64: zynqmp: Add label property to all ina226 on m-a2197-01
Label property is adding capability to distiguish chips from each other
when iio framework is used.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Michal Simek
eaf96b1edd arm64: zynqmp: Enable iio-hwmon for ina226 on m-a2197-01
ina226 hwmon driver is deprecated and it is recommended to use new iio
based driver. The patch is enabling iio-hwmon driver to export
functionality from IIO to hwmon interface to be able to use lm-sensors
package.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Michal Simek
e0c08238e9 arm64: zynqmp: Fix typo in zynqmp-p-a2197-00-revA
Trivial fix but not detected by checkpatch.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Nishant Mittal
ebb28f2d30 arm64: zynqmp: Added new tps53679 compatible string for a2197-0x boards
Added tps53679 compatible string to tps53681. They are both compatible to
each other and tps53679 has Linux driver already.

Signed-off-by: Nishant Mittal <nishant.mittal@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Nishant Mittal
74ef6207ab arm64: zynqmp: Fix i2c address of u70 on p-a2197-00 board
tps53681 is i2c address 0x60 not 0xc0.

Signed-off-by: Nishant Mittal <nishant.mittal@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Michal Simek
209c04e5a9 arm64: zynqmp: Add label property to all ina226 on g-a2197-00
Label property is adding capability to distiguish chips from each other
when iio framework is used.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Michal Simek
ae7677edb7 arm64: zynqmp: Enable iio-hwmon for ina226 on g-a2197-00
ina226 hwmon driver is deprecated and it is recommended to use new iio
based driver. The patch is enabling iio-hwmon driver to export
functionality from IIO to hwmon interface to be able to use lm-sensors
package.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Michal Simek
2975a42b42 arm64: zynqmp: Use ethernet-phy as node name for ethernet phys
Ethernet phys based on devicetree specification should be using
ethernet-phy@ node name instead of pure phy@.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Michal Simek
50d9283347 arm64: zynqmp: Sync names for SC with Versal
ZynqMP based System controller is present on Versal boards. This patch is
aligning names with Versal to follow the spec.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Michal Simek
233750d3a1 ARM: zynq: Add missing pl353-smc node
DT binding was reviewed in Linux by commit b0b41af12a1b
("dt-bindings: memory: Add pl353 smc controller devicetree binding
information") that's why this fragment can be also added to U-Boot
repository.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24 13:37:01 +02:00
Eugen Hristev
67fd5d85d1 ARM: dts: sam9x60ek: add i2c0 as flexcom0 subnode and eeprom memory
Add i2c0 bus as subnode to flx0.
Add eeprom memory as slave device to i2c0.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-24 13:01:57 +03:00
Eugen Hristev
2d604ed852 ARM: dts: sam9x60: add flx0 node
Add node for Flexcom0.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-24 13:01:57 +03:00
Jean-Jacques Hiblot
78830364b8 ARM: DTS: keystone: complete the description of the USB PHY devices
As the PHY driver now handles the transitions of USB power domain, we
must add this information in the node of each PHY.
Also, the phy are expected in the "phys" property, not "usb-phys".
Also add the aliases for the USB ports on boards with more than a single
port.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-24 11:28:17 +02:00
Vignesh Raghavendra
02e262c249 arm: dts: k3-j721e-som-p0: Add HyperFlash node
J721e SoM as a 64MB HyperFlash on board. Add pinmux and DT node for the
same.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-10-24 09:49:22 +02:00
Vignesh Raghavendra
358032f9a5 arm: dts: k3-j721e-mcu-wakeup: Add HyperBus Controller node
Add DT node for HyperBus Memory Controller in the FSS. On J721e, its not
possible to use OSPI0 and HBMC simultaneously as they are muxed within
the Flash Subsystem hence disable HBMC by default as keep OSPI enabled.
Bootloader will fixup DT when it detects HyperFlash instead of OSPI.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-10-24 09:49:16 +02:00
Faiz Abbas
991e8a5ab8 arm: dts: k3-j721e-main: Add UFS nodes
Add TI UFS glue layer and Cadence UFS Host controller DT nodes.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-10-23 20:47:12 -04:00
Neil Armstrong
21cd92faa5 ARM: dts: meson-sm1: add U-Boot specific DT for graphics
Rename meson-g12a-u-boot.dtsi into meson-g12-common-u-boot.dtsi to
match the new DT architecture and add meson-sm1-sei610-u-boot.dtsi
to handle the U-Boot specific DT for graphics.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18 14:40:32 +02:00
Neil Armstrong
5be4afe15f ARM: dts: Import SEI610 DT from Linux 5.4-rc2
Import the Amlogic SM1 DT and the SEI610 board DT from [1]

[1] da0c9ea146cb ("Linux 5.4-rc2")

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18 14:29:59 +02:00
Andreas Färber
1a87cc7891 arm: dts: Import and update DT for Khadas VIM3
In Linux meson-g12-common.dtsi was introduced as well as new g12b nodes
and headers, as dependencies of new meson-g12b-a311d-khadas-vim3.dts.

Copied from da0c9ea146cb ("Linux 5.4-rc2")

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18 11:57:00 +02:00
Neil Armstrong
ce9fa7bffc ARM: dts: meson-g12a: add U-Boot specific DT for graphics
Like the meson-gx support, add the U-Boot specific bits in DT
to support graphics on G12A SoCs.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-18 11:51:22 +02:00
Tom Rini
6891152a45 Merge branch 'master' of git://git.denx.de/u-boot-socfpga
- vining_fpga updates
2019-10-14 21:00:10 -04:00
Tom Rini
6f1f28b8e1 u-boot-imx-20191014
-------------------
 
 Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/597498628
 
 	- logicpd pinmux
 	- i.MX7ULP: imx_ddr_size
 	- fixes Toradex i.MX6/i.MX7
 	- pico-imx7d
 	- tpc70 converted to DM
 	- New Board: meerkat96
 	- add HAB version command
 	- i.MX8 :
       		imx8: Jump from alias to OCRAM address at SPL init
       		imx8qm/qxp: Set SPL TEXT base to OCRAM base
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl2kbrYPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et30iQL/RDCe3R1MuQPQdjBEUcb+ZXP8/vaAAbgAsv6
 MNN/ybJ8pIXGVF5qxJxzZgMcUvIq1vy8romomIwVBOr7gueoYMokpKeE95P4XK2r
 HmFM+/ZcXIXvDrHrULDquAvCG6zhOMHXdbmWcQcZLcHSCsZpkh4YuuGzFVpxTgNE
 kTJpEF+Orw49w9wMVKeqfv9z3MsYkr/vV3kH/+ISndN6cOBOjV56Qzl/hlzxiN1d
 wueTQi1pxUVjbsKWIkf76XTeSa5621bM01+YMN3CFq/AWhVMbpnaWWGB6ET4NBjD
 k/BjRgCZ+/hwjpHnbylHEmsLolNsIXn8KirE73OCmIvov/vUYaaZJ5lBzU+L2A5k
 tK6p1LOTvsRxKBsN49hQIQLJMcn/sp9RpP9ohgCs3lj7bKGAQ1HoxqylypeDGPv1
 htKGdBFGiEfoCus1Ob7NAevYAPlVM7h+mDzFSYhlr9BZnrDj2V3nwICj8KV3wkwl
 lPiUQiYMUhgvSSSiU2NJDSy1onjSXA==
 =J8jd
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20191014' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20191014
-------------------

Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/597498628

	- logicpd pinmux
	- i.MX7ULP: imx_ddr_size
	- fixes Toradex i.MX6/i.MX7
	- pico-imx7d
	- tpc70 converted to DM
	- New Board: meerkat96
	- add HAB version command
	- i.MX8 :
      		imx8: Jump from alias to OCRAM address at SPL init
      		imx8qm/qxp: Set SPL TEXT base to OCRAM base
2019-10-14 13:00:51 -04:00
Yannick Fertré
aa37506bd3 ARM: dts: stm32mp1: add dsi host for stm32mp157c-dk2 board
The new class dsi host allows the management of the bridge DPI to DSI.
This bridge is embedded in the chipset mp1 (come from synopsys company).

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13 23:39:25 +02:00
Yannick Fertré
b49711f0c0 ARM: dts: stm32mp1: add dsi host for stm32mp157c-ev1 board
The new class dsi host allows the management of the bridge DPI to DSI.
This bridge is embedded in the chipset mp1 (come from synopsys company).

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13 23:39:14 +02:00
Yannick Fertré
30173bacdd ARM: dts: stm32f769: add display for STM32F769 disco board
Enable the display controller, mipi dsi bridge & panel.
Set panel display timings.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13 23:39:01 +02:00
Lukasz Majewski
62cef35bb0 imx: dts: Add u-boot specific set of device tree properties for tpc70
This commit adds new file - imx6q-kp-u-boot.dtsi with a set of u-boot
specific properties for imx6q KP device.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13 22:49:11 +02:00
Lukasz Majewski
f1a46398f0 imx: tpc70: dts: Add TPC70 board (imx6q based) device tree description
This commit defines the TPC70 imx6q board with device tree description.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-13 22:49:11 +02:00
Adam Ford
2881ec544d ARM: imx6q_logic: Enable Pin muxing in SPL
With the 256KB of OCRAM available to SPL now, there should be
enough room to enable the pinmuxing in SPL from the device tree.

This patch enables SPL_PINCTRL et al and adds the serial and
usdhc pin mux references to the -u-boot.dtsi file so the pins can be
configured from the device tree.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-10-13 22:49:11 +02:00
Soeren Moch
dc6c8fb84e ARM: dts: imx6q-tbs2910: Sync devicetree with kernel 5.3
Signed-off-by: Soeren Moch <smoch@web.de>
2019-10-13 22:49:11 +02:00
Shawn Guo
ad61658dd6 ARM: dts: import meerkat96 board support
It imports device tree source of meerkat96 board from Linux Kernel.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2019-10-13 22:49:11 +02:00
Tom Rini
0c9cc5155c Merge branch '2019-10-11-master-imports'
- Assorted cleanups
- FAT bugfixes
- mediatek platform updates
2019-10-12 10:10:59 -04:00
Lokesh Vutla
fbbcb1e020 arm: dts: k3-j721e-common-proc-board: Mark main_uart0 as shared device
Main uart0 is used as debug console by both R5SPL and A72 bootloader and
Linux. So mark it as shared device so that power-domain request is
successful by both cores.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11 13:32:39 -04:00
Tero Kristo
752a45a153 board: ti: am335x-ice: Configure the CDCE913 clock synthesizer
AM335x-ICE boards contain the CDCE913 clock synthesizer, and their
reset crystal capacitance load value of 10pF is wrong leading into
lost packets in certain networking tests. Add DT data for this
device, and probe it from the board file to program the crystal
capacitance load value to 0pF to avoid any problems.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2019-10-11 13:32:39 -04:00
Tero Kristo
9850d4e52f board: ti: am43xx-idk: Configure the CDCE913 clock synthesizer
AM43xx-IDK boards contain the CDCE913 clock synthesizer, and their
reset crystal capacitance load value of 10pF is wrong leading into
lost packets in certain networking tests. Add DT data for this
device, and probe it from the board file to program the crystal
capacitance load value to 0pF to avoid any problems.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2019-10-11 13:32:39 -04:00
Tero Kristo
e8e683d33b board: ti: am57xx-idk: Configure the CDCE913 clock synthesizer
AM57xx-IDK boards contain the CDCE913 clock synthesizer, and their
reset crystal capacitance load value of 10pF is wrong leading into
lost packets in certain networking tests. Add DT data for this
device, and probe it from the board file to program the crystal
capacitance load value to 0pF to avoid any problems.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2019-10-11 13:32:39 -04:00
Moses Christopher
51d4e47afa am335x, guardian: adapt guardian board to DM
- update partition table - remove env partitions
  - dts: add new interfaces (uart2, extra gpio-key)
         remove unneeded entries
         update nand timings for performance improvement
  - defconfig: adapt configurations to suit DM
               remove unneeded configs
  - am335x_guardian.h: remove mmc boot

Signed-off-by: Moses Christopher <BollavarapuMoses.Christopher@in.bosch.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-10-11 13:31:18 -04:00
Ryder Lee
898cc1365c arm: dts: split mtk-reset.h into per-chip header
This follows the linux header rules to avoid conflict bitfields.

Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
2019-10-11 10:10:18 -04:00
Ryder Lee
625137da44 arm: dts: add PCIe controller for MT7623 SoC
This adds PCIe and its PHY nodes for MT7623.

Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
2019-10-11 10:10:18 -04:00
Philippe Reynes
05e93b3a13 dt: bcm968580xref: add a spi-nor device
This commit add a spi-nor device in the bcm96850xref device tree.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Kursad Oney <kursad.oney@broadcom.com>
2019-10-11 10:09:16 -04:00
Philippe Reynes
906af4a72b dt: bcm6858: add hsspi controller
This commit add a hsspi controller in the bcm6858 device tree.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Kursad Oney <kursad.oney@broadcom.com>
2019-10-11 10:09:16 -04:00
Kursad Oney
ce9e2eedda dt: bcm963158: add a spi-nor device
This change adds a spi nor flash device to the bcm963158 board.

Signed-off-by: Kursad Oney <kursad.oney@broadcom.com>
Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-10-11 10:09:16 -04:00
Kursad Oney
b2983d1f6d dt: bcm63158: Add hsspi controller
This change adds the hsspi controller to the 63158 dtsi.

Signed-off-by: Kursad Oney <kursad.oney@broadcom.com>
Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-10-11 10:09:16 -04:00
Suman Anna
35f21c3ac6 arm: dts: k3-am65-mcu: Add MCU domain R5F DT nodes
The AM65x SoCs has a single dual-core Arm Cortex-R5F processor
subsystem/cluster (MCU_R5FSS0) within the MCU domain. This cluster
can be configured at boot time to be either run in a LockStep mode
or in an Asymmetric Multi Processing (AMP) fashion in Split-mode.
This subsystem has 64 KB each Tightly-Coupled Memory (TCM) internal
memories for each core split between two banks - ATCM and BTCM
(further interleaved into two banks). There are some IP integration
differences from standard Arm R5 clusters such as the absence of
an ACP port, presence of an additional TI-specific Region Address
Translater (RAT) module for translating 32-bit CPU addresses into
larger system bus addresses etc.

Add the DT node for the MCU domain R5F cluster/subsystem, the two
R5 cores are added as child nodes to the main cluster/subsystem node.
The cluster is configured to run in Split-mode by default, with the
ATCMs enabled to allow the R5 cores to execute code from DDR with
boot-strapping code from ATCM. The inter-processor communication
between the main A72 cores and these processors is achieved through
shared memory and Mailboxes.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11 10:07:35 -04:00
Lokesh Vutla
1b846fc24d arm: dts: k3-j721e-main: Add C71x DSP node
The J721E SoCs have a single TMS320C71x DSP Subsystem in the MAIN
voltage domain containing the next-generation C711 CPU core. The
subsystem has 32 KB of L1D configurable SRAM/Cache and 512 KB of
L2 configurable SRAM/Cache. This subsystem has a CMMU but is not
used currently. The inter-processor communication between the main
A72 cores and the C711 processor is achieved through shared memory
and a Mailbox. Add the DT node for this DSP processor sub-system
in the common k3-j721e-main.dtsi file.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11 10:07:35 -04:00
Lokesh Vutla
293e39780d arm: dts: k3-j721e-main: Add C66x DSP nodes
The J721E SoCs have two TMS320C66x DSP Core Subsystems (C66x CorePacs)
in the MAIN voltage domain, each with a C66x Fixed/Floating-Point DSP
Core, and 32 KB of L1P & L1D configurable SRAMs/Cache and an additional
288 KB of L2 configurable SRAM/Cache. These subsystems do not have
an MMU but contain a Region Address Translator (RAT) sub-module for
translating 32-bit processor addresses into larger bus addresses.
The inter-processor communication between the main A72 cores and
these processors is achieved through shared memory and Mailboxes.
Add the DT nodes for these DSP processor sub-systems in the common
k3-j721e-main.dtsi file.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11 10:07:35 -04:00
Lokesh Vutla
55f8eb3169 arm: dts: k3-j721e-main: Add MAIN domain R5F cluster nodes
The J721E SoCs have 3 dual-core Arm Cortex-R5F processor (R5FSS)
subsystems/clusters. One R5F cluster (MCU_R5FSS0) is present within
the MCU domain, and the remaining two clusters are present in the
MAIN domain (MAIN_R5FSS0 & MAIN_R5FSS1). Each of these can be
configured at boot time to be either run in a LockStep mode or in
an Asymmetric Multi Processing (AMP) fashion in Split-mode. These
subsystems have 64 KB each Tightly-Coupled Memory (TCM) internal
memories for each core split between two banks - ATCM and BTCM
(further interleaved into two banks). There are some IP integration
differences from standard Arm R5 clusters such as the absence of
an ACP port, presence of an additional TI-specific Region Address
Translater (RAT) module for translating 32-bit CPU addresses into
larger system bus addresses etc.

Add the DT nodes for these two MAIN domain R5F cluster/subsystems,
the two R5 cores are each added as child nodes to the corresponding
main cluster node. Configure SS0 in split mode an SS1 in lockstep mode,
with the ATCMs enabled to allow the R5 cores to execute code from DDR
with boot-strapping code from ATCM.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11 10:07:35 -04:00
Lokesh Vutla
b9f035e9c8 arm: dts: k3-j721e-mcu: Add MCU domain R5F cluster node
The J721E SoCs have 3 dual-core Arm Cortex-R5F processor (R5FSS)
subsystems/clusters. One R5F cluster (MCU_R5FSS0) is present within
the MCU domain, and the remaining two clusters are present in the
MAIN domain (MAIN_R5FSS0 & MAIN_R5FSS1). Each of these can be
configured at boot time to be either run in a LockStep mode or in
an Asymmetric Multi Processing (AMP) fashion in Split-mode. These
subsystems have 64 KB each Tightly-Coupled Memory (TCM) internal
memories for each core split between two banks - ATCM and BTCM
(further interleaved into two banks). There are some IP integration
differences from standard Arm R5 clusters such as the absence of
an ACP port, presence of an additional TI-specific Region Address
Translater (RAT) module for translating 32-bit CPU addresses into
larger system bus addresses etc.

Add the DT node for the MCU domain R5F cluster/subsystem, the two
R5 cores are added as child nodes to the main cluster/subsystem node.
The cluster is configured to run in LockStep mode by default, with the
ATCMs enabled to allow the R5 cores to execute code from DDR with
boot-strapping code from ATCM. The inter-processor communication
between the main A72 cores and these processors is achieved through
shared memory and Mailboxes.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11 10:07:34 -04:00
Andreas Dannenberg
20a229676e armv7R: dts: k3: am654: Add MCU_UART0 related definitions
Although we currently use the MAIN_UART0 for R5 SPL console output there
are cases where we require access to the MCU_UART0 as well for example in
case of UART-based Y-Modem boot. To support these scenarios add related
DTS definitions to be able to use that UART early on.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-10-11 10:07:33 -04:00
Marek Vasut
4a9f633e3d ARM: socfpga: vining_fpga: Update DT
Pick minor changes from the downstream DT, disable MMC, add GMAC0 node
and adjust PHY skew settings for GMAC1.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Silvio Fricke <silvio.fricke@softing.com>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-10-09 22:54:18 +02:00
Marek Vasut
94a16b8e70 ARM: socfpga: vining_fpga: Rename VINING|FPGA
The company Samtec was merged into Softing, migrate the board over to
the new name and update copyright headers.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Silvio Fricke <silvio.fricke@softing.com>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-10-09 22:54:17 +02:00
Tom Rini
44fb0d6c9f Xilinx/FPGA changes for v2020.01
FPGA:
 - Enable fpga loading on Versal
 - Minor fix
 
 Microblaze:
 - Fix LMB configurations to support initrds
 - Some other cleanups
 
 Zynq:
 - Minor config/dt changes
 - Add distro boot support for usb1 and mmc1
 - Remove Xilinx private boot commands and use only distro boot
 
 ZynqMP:
 - Kconfig cleanups, defconfig updates
 - Update some dt files
 - Add firmware driver for talking to PMUFW
 - Extend distro boot support for jtag
 - Add new IDs
 - Add system controller configurations
 - Convert code to talk firmware via mailbox or SMCs
 
 Versal:
 - Add board_late_init()
 - Add run time DT memory setup
 - Add DFU support
 - Extend distro boot support for jtag and dfu
 - Add clock driver
 - Tune mini configurations
 
 Xilinx:
 - Improve documentation (boot scripts, dt binding)
 - Enable run time initrd_high calculation
 - Define default SYS_PROMPT
 - Add zynq/zynqmp virtual defconfig
 
 Drivers:
 - Add Xilinx mailbox driver for talking to firmware
 - Clean zynq_gem for Versal
 - Move ZYNQ_HISPD_BROKEN to Kconfig
 - Wire genphy_init() in phy.c
 - Add Xilinx gii2rgmii bridge
 - Cleanup zynq_sdhci
 - dwc3 fix
 - zynq_gpio fix
 - axi_emac fix
 
 Others:
 - apalis-tk1 - clean config file
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXZ2mcwAKCRDKSWXLKUoM
 IT/KAJ4tL49YwINqCVGd7gafWvdfC4htygCcCgr9gLnJ+LjDQkxWT/r6faIcL00=
 =OnMk
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2020.01' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx/FPGA changes for v2020.01

FPGA:
- Enable fpga loading on Versal
- Minor fix

Microblaze:
- Fix LMB configurations to support initrds
- Some other cleanups

Zynq:
- Minor config/dt changes
- Add distro boot support for usb1 and mmc1
- Remove Xilinx private boot commands and use only distro boot

ZynqMP:
- Kconfig cleanups, defconfig updates
- Update some dt files
- Add firmware driver for talking to PMUFW
- Extend distro boot support for jtag
- Add new IDs
- Add system controller configurations
- Convert code to talk firmware via mailbox or SMCs

Versal:
- Add board_late_init()
- Add run time DT memory setup
- Add DFU support
- Extend distro boot support for jtag and dfu
- Add clock driver
- Tune mini configurations

Xilinx:
- Improve documentation (boot scripts, dt binding)
- Enable run time initrd_high calculation
- Define default SYS_PROMPT
- Add zynq/zynqmp virtual defconfig

Drivers:
- Add Xilinx mailbox driver for talking to firmware
- Clean zynq_gem for Versal
- Move ZYNQ_HISPD_BROKEN to Kconfig
- Wire genphy_init() in phy.c
- Add Xilinx gii2rgmii bridge
- Cleanup zynq_sdhci
- dwc3 fix
- zynq_gpio fix
- axi_emac fix

Others:
- apalis-tk1 - clean config file
2019-10-09 16:22:03 -04:00
Tom Rini
eaa0bde051 u-boot-imx-20191009
-------------------
 
 Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/595148532
 
 - MX6UL / ULZ
 - Toradex board
 - Allow to set OCRAM for MX6Q/D
 - MX7ULP
 - MX8: (container image, imx8mq_mek), SCU API
 - fix several board booting from SD/EMMC (cubox-i for example)
 - pico boards
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl2dlTAPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3yfgL/1b4pKCwxswK42XkPpdHN1u/v2W/PVDanl/H
 EYxlluHVFH23bLTjLvrrgQjAnZD1VQhxWq3bwCMoJ8vb9tYQ3d9vq7XADQ0WVQV+
 EfhE33fVRPRT3rEdhDKWm+y1mL8YPvYEBnr9li7qU9n1VxiwONPXxMXMqoo9/lbM
 b6lJaG5KkuK8Ofx3cYFVQeAEdsFYIJ2aXtTqsqrV9o2sjruOuG3Ux+6Ov+9O0crY
 q8MXvW6kwWkVVNriVV7Yal0pomPZfMTqft007En9Mv2FtXqMeCWZ4Xh2LtRylR7n
 ruIbo94jkPuwuZ0p/6SeiyopoG/hU/skrkJv1s8W70DOsyaunP2BsveYXEjMV2Rb
 DomotcJit9Ws6P7rOP1oI8OvxSxVN8n6mo23UviZd8MjNAmOm49BtSxVGGB+pwmr
 ufGFG4MGQ5VpCxmzh6KrJCLXpI/mhKrkBkZy58cUbus7aPv3es/jBmmtGlU3m6ka
 NlEzHOX1hpJV/lhLvxjqRhVxuXvXOA==
 =+e3p
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20191009' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20191009
-------------------

Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/595148532

- MX6UL / ULZ
- Toradex board
- Allow to set OCRAM for MX6Q/D
- MX7ULP
- MX8: (container image, imx8mq_mek), SCU API
- fix several board booting from SD/EMMC (cubox-i for example)
- pico boards

[trini: display5 merged manually]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-09 11:44:45 -04:00
Joris Offouga
3a7f25b765 pico-imx7d: Remove dead code for dm_video
Since convert dm_video, unused code introduced, so remove this

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08 16:36:37 +02:00
Peng Fan
9b15ce9193 imx: Add i.MX8MM EVK board support.
Add board and SoC dts
Add ddr training code
support SD/MMC/GPIO/PINCTRL/UART

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08 16:36:36 +02:00
Peng Fan
d68d73df17 arm: dts: add i.MX8MM pin func
Import i.MX8MM pin func from Linux Kernel,
commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux")

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08 16:36:36 +02:00
Peng Fan
2f1723132e arm: dts: import i.MX8MM dtsi
Import i.MX8MM dtsi from Linux Kernel,
commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux")

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08 16:36:36 +02:00
Patrick Wildt
63927b8fc7 imx: add the i.MX8M reset controller node
This patch adds the reset controller node to the i.MX8MQ SoC
device tree.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
2019-10-08 16:36:36 +02:00
Patrick Wildt
d08a194871 imx: add support for i.MX8MQ power domain controller
Add support for the power domain controller that's used on the
i.MX8MQ.  This will be needed to be able to power on the PCIe
controller.  Bindings taken from Linux, driver implementation
taken from the i.MX8 power domain controller and adjusted for
the i.MX8M SoC.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
2019-10-08 16:36:36 +02:00
Parthiban Nallathambi
6745dac494 ARM: dts: pcl063: add usdhc reset pin of eMMC
pcl063 phycore SoM with eMMC also got usdhc reset pin,
add reset pin to pinmux.

Signed-off-by: Parthiban Nallathambi <pn@denx.de>
2019-10-08 16:36:36 +02:00
Anatolij Gustschin
e4b91f085d imx: wandboard: convert FEC support to DM_ETH
Remove CONFIG_DM_ETH conversion warning to avoid board removal.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-10-08 16:36:36 +02:00
Lukasz Majewski
f1e323a0a5 dts: imx28: Remove #include "imx28.dtsi" from imx28-u-boot.dtsi file
After this change it is possible to use imx28-<board>-u-boot.dtsi with
the imx28-u-boot.dtsi explicitly included without breaking setup from
imx28-<board>.dts file.

The problem is that the imx28.dtsi included in a wrong place overrides the
changes made in imx28-<board>.dts. As a result some devices are "disabled"
in the final DTB.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08 16:36:36 +02:00
Lukasz Majewski
d5354f59d0 DM: WDT: Convert WDT driver to use DM/DTS (including SYSRESET)
This commit enables support for CONFIG_WDT in the U-Boot proper. Moreover,
the SYSRESET_WATCHDOG driver is used to support 'reset' command.

As SPL is not yet ready for DM conversion, the CONFIG_HW_WATCHDOG is
enabled for it. This allows the legacy SPL code to work properly.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-10-08 16:35:59 +02:00
Fabio Estevam
004eee86f1 pico-imx6: Add initial support
Add the initial support for the pico-imx6 variants.

DDR initialization is based on the TechNexion's U-Boot code.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2019-10-08 16:35:59 +02:00
Joris Offouga
d89f0a889f configs: pico-imx7d: Convert to DM_VIDEO
This commit convert all pico-imx7d to DM_VIDEO

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
2019-10-08 16:35:59 +02:00
Joris Offouga
8787a70c52 ARM: dts: pico-imx7d: sync device tree with v5.3-rc6
Synchronize device tree with v5.3-rc6 label

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
2019-10-08 16:35:59 +02:00
Joris Offouga
a89b1feabb ARM: dts: pico-imx7d: Add u-boot.dtsi for uboot specific dts change
This commit introduce u-boot.dtsi

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Suggested-by: Peng Fan <peng.fan@nxp.com>
2019-10-08 16:35:59 +02:00
Peng Fan
7932b1c9fd imx: imx6qdl: dtsi: move U-Boot specific change to u-boot.dtsi
The changes were added by following patch:
commit <9002e735e717> ("imx: mx6sabresd: fix boot hang with video")
commit <f45ec8fcfb86> ("imx6: dts: add 'u-boot, dm-pre-reloc' to soc and ipu nodes")

Let's move the U-Boot specific change to imx6qdl-u-boot.dtsi

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08 16:35:58 +02:00
Troy Kisky
f8f9f79a63 nitrogen6x: migrate to using device tree
Migrate to using device tree required for further driver model
integration.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2019-10-08 16:35:16 +02:00
Peng Fan
ab1c482440 arm: dts: imx: fsl-imx8qm.dtsi: add gpio aliases to fix gpio command
The gpio command currently uses equal bank names "GPIO0_"
for all existing gpio banks, i. e.:

U-Boot# gpio status -a
Bank GPIO0_:
GPIO0_0: input: 0 [ ]
GPIO0_1: input: 0 [ ]
...

Bank GPIO0_:
GPIO0_0: input: 0 [ ]
GPIO0_1: input: 0 [ ]
    ...

So the command is broken, it is not possible to address
a desired bank. Add gpio aliases to fix this.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-08 16:35:16 +02:00
Peng Fan
ae0760584b imx: mx6ul_14x14_evk: convert to DM_VIDEO
To support DM_VIDEO,
 Add display node for lcdif
 Drop board iomuxc settings.
 Enable DM_VIDEO

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-08 16:33:45 +02:00
Peng Fan
1d293e6804 imx: add i.MX6ULZ board
Add i.MX6ULZ board support. the i.MX6ULZ is SW compatible
with i.MX6ULL. so most code of i.MX6ULL can be reused
by i.MX6ULZ.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08 16:33:45 +02:00
Peng Fan
939a9644f0 arm: dts: import dts for i.MX6ULZ
Import kernel dts for i.MX6ULZ from
commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux")

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08 16:33:45 +02:00
Peng Fan
c158381288 arm: dts: sync dts for i.MX6ULL
Sync kernel dts for i.MX6ULL from
commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux")

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08 16:33:45 +02:00
Peng Fan
281256c064 arm: dts: sync dts for i.MX6UL
Sync kernel dts for i.MX6UL from
commit <0a8ad0ffa4d8> ("Merge tag 'for-linus-5.3-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux")

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-10-08 16:33:45 +02:00
Ibai Erkiaga
95497afada arm64: zynqmp: add firmware and mailbox node to DT
The following patch adds a mailbox node and firmware node to following the
mainline DT.

Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:55:11 +02:00
Michal Simek
64eb13bfd7 arm64: zynqmp: Add a2197 memory board revA
Similar to processor board but i2c structure is completely different.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:55:11 +02:00
Michal Simek
917c57845a arm64: zynqmp: Add System Controller for a2197-g/p
Similar SCs but different wiring.

- dc_i2c is connected to X-PRC cards that's why label is required to have
  an option to hook up some devices.
- Exactly identify i2c devices on x-prc boards.
  In case of missing i2c connection devices won't be accessible.
- USB 0 should be device mode with super speed.
- USB 1 should be host mode.
- Fix i2c mux reset pin entry - commented, not verified.
- Fix i2c1 eeprom compatible string - it is an ST 128Kbit device.
  Need to use atmel fallback.
- Fix si570 I2C slave address and add corresponding part numbers.
- Enable AMS for system monitoring.
- phy reset property should be commented because it will throw a
  warning dump when called from context that can sleep.
  No support for phys property (zynqmp phy driver) with SGMII.
  Add is-internal-pcspma property required by uboot.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
2019-10-08 09:55:11 +02:00
Michal Simek
be972b2bd1 arm64: zynqmp: Add generic a2197 system controller config
Add generic configuration for a2197-p/-m/-g boards.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:55:11 +02:00
Michal Simek
b96b695f2c arm64: zynqmp: Switch spi-flash to jedec, spi-nor compatible
Change has been done across the whole tree only zynqmp-mini-qspi hasn't
been fixed.
Origin changed done by commit ffd4c7c2ec
("dts: switch spi-flash to jedec, spi-nor compatible")

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:41:27 +02:00
Vipul Kumar
69b67ec8c9 ARM: zynq: dts: Added alias for usb node
This patch added alias for usb node in dts file.

Signed-off-by: Vipul Kumar <vipul.kumar@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:41:27 +02:00
Michal Simek
a6af30908b ARM: zynq: Align model name with DT
Use model property to distinguish different configurations.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:41:27 +02:00
Michal Simek
dd3c7b6ea1 arm64: zynqmp: Add u-boot,dm-pre-reloc to clk300 node
This node is used by qspi driver for supporting qspi boot mode in SPL.

Similar changes have beeen done by commit a9022b017a
("ARM64: zynqmp: Add u-boot,dm-pre-reloc to clk nodes")

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08 09:11:14 +02:00
Eugen Hristev
c69ce8029a ARM: dts: at91: sam9x60ek: add onewire support
Add support for onewire memory.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-08 09:16:11 +03:00
Eugen Hristev
223cab5efb ARM: dts: at91: sam9x60: add onewire node
Add onewire node for w1 support.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-08 09:16:11 +03:00
Tudor Ambarus
228f9e0244 ARM: dts: at91: sam9x60ek: Enable qspi node
The sam9x60 qspi controller uses 2 clocks, one for the peripheral register
access, the other for the qspi core and phy. Both are mandatory.

Enable the qspi node together with the SST26VF064B qspi nor flash
memory. Booting from the QSPI NOR flash is now possible.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-10-08 09:16:11 +03:00
Nicolas Ferre
885554360d ARM: dts: at91: sam9x60: Add macb0 Ethernet controller
Add Ethernet controller to dtsi file and enable it on sam9x60ek
platform connected with rmii.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2019-10-08 09:16:11 +03:00
Sandeep Sheriker Mallikarjun
f99e0ad25a ARM: dts: Add dts files for sam9x60ek
add device tree files for sam9x60ek board with below changes.

- Add initial device nodes (pmc, pinctrl, sdhc, dbgu & pit)
- Add the reg property for the pinctrl node.
- Add the "u-boot,dm-pre-reloc" property to determine which nodes
  are used by the board_init_f stage.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
[prasanthi.chellakumar@microchip.com: fix style/whitespace issues]
Signed-off-by: Prasanthi Chellakumar <prasanthi.chellakumar@microchip.com>
[nicolas.ferre@microchip.com:
- fix gclk,
- fix pio/pinctrl controller definition and allow to have more
  than only PIOA for this SoC,
- removing pinctrl address]
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[claudiu.beznea@microchip.com:
- use SAM9X60's compatible for pinctrl
- add drive strength and slew rate options for SDMMC0 pins.]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
[tudor.ambarus@microchip.com:
- u-boot,dm-pre-reloc property in dedicated file,
- fix pit len, starts from 0xFFFFFE40 and it is of len 0x10]
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-10-08 09:16:11 +03:00
Eugen Hristev
4a500e4337 ARM: dts: at91: sama5d27_wlsom1: add hlcdc node
Add node for hlcld for u-boot logo display at boot.
This is compatible with the Precision Design Associates (PDA) TM5000 screen.
Timings are compatible with simple panel from Linux, panel name is
pda_91_00156_a0

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-08 09:16:11 +03:00
Eugen Hristev
06e0da70ca ARM: dts: at91: sama5d27_wlsom1_ek: add support for qspi
Add node for qspi1 memory connected on the wlsom

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-08 09:16:11 +03:00
Eugen Hristev
58581058f9 ARM: dts: at91: sama5d2: add seq for qspi1
qspi1 does not have an alias/seq number. This is required for
SPL default SF bus booting for the boards that have this SoC

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-08 09:16:11 +03:00
Nicolas Ferre
44b5c40be3 board: atmel: add sama5d27_wlsom1_ek board
Add support for the SAMA5D27-WLSOM1-EK. It's based on the Microchip
WireLess SoM which contains the SAMa5D27 LPDDR2 2Gbits SiP.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[eugen.hristev@microchip.com]: added u-boot specific dtsi and ported to 2019.10
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-10-08 09:16:11 +03:00
Tom Rini
dac51e9aaf Merge branch 'master' of git://git.denx.de/u-boot-sh
- ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulator
2019-10-05 20:06:58 -04:00
Adam Ford
5ff1963da3 ARM: dts: imx6q-logicpd: Add missing imx6q-logicpd-u-boot for SPL
The SPL device tree is missing the entires for gpio1, uart1, usdhc1 and
usdhc2.  This creates the missing imx6q-logicpd-u-boot.dtsi file
which will enable these functions so SPL can properly setup UART, detect
microSD card, and startup.

Fixes: 8f4691e31a ("ARM: imx6q_logic: With SPL_OF_CONTROL enabled,
remove MMC init")

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-10-04 12:21:23 -04:00
Marek Vasut
49d5fba81c ARM: dts: rmobile: Restore increase off-on delay on the SD Vcc regulator
This patch restores commit c49d0ac38a ("ARM: dts: rmobile: Increase off-on
delay on the SD Vcc regulator"), which was accidentally dropped during DT
resync in commit 317d13ac63 ("ARM: dts: rmobile: Synchronize Gen3 DTs with
Linux 5.0").

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Fixes: 317d13ac63 ("ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.0")
2019-09-30 02:07:02 +02:00
Michael Trimarchi
f810ea6acb rockchip: rk3288-tinker: Attach missing peripherals at SPL
Tinker board needs to mux all the sdmmc gpio and
activate the regulator connected to bank 7. Remove
all the bank that are not in use and mark them as dm,spl
so-that it would initialize at SPL.

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2019-09-19 09:35:31 +08:00
Tom Rini
a9fa70b7b7 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- Add emmc hs200 support
- Few bug fixes related to serdes, I2C, ethernet, etc
2019-09-16 13:13:45 -04:00
Faiz Abbas
16f14b930d ARM: dts: dra74x: Fix iodelay configuration for mmc3
According to the latest am572x[1] and dra74x[2] data manuals, mmc3
default, hs, sdr12 and sdr25 modes use iodelay values given in
MMC3_MANUAL1. Set the MODE_SELECT bit for these so that manual mode is
selected and correct iodelay values are configured.

[1] http://www.ti.com/lit/ds/symlink/am5728.pdf
[2] http://www.ti.com/lit/ds/symlink/dra746.pdf

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-09-13 11:56:30 -04:00
Suniel Mahesh
d60eb8e49e arm: am437x: cm-t43: Add device tree, enable OF_CONTROL
Add device tree from Linux for driver model conversion
and enable OF_CONTROL. This will remove the following compile
warning:
==================================================
Device Tree Source is not correctly specified.
Please define 'CONFIG_DEFAULT_DEVICE_TREE'
or build with 'DEVICE_TREE=<device_tree>' argument
===================================================
Target was compile tested, build was clean.

Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
2019-09-13 11:56:08 -04:00
Alex Marginean
a3ce94b602 arm: dts: ls1028a-qds: define the MDIO MUX
Add the device-tree structure describing the MUX in board dts.

QDS board has an on-board RGMII PHY and 4 slots for extension cards.
All these can be accessed over MDIO through a MDIO MUX controlled
over I2C.

Signed-off-by: Alex Marginean <alexm.osslist@gmail.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 16:15:31 +05:30
Yinbo Zhu
23da111d5f dts: armv8: add emmc hs200 support for ls1028ardb
Add emmc hs200 support for ls1028ardb

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 14:04:43 +05:30
Yinbo Zhu
0f021c8bde dts: armv8: add emmc hs200 support for lx2160ardb
Add emmc hs200 support for lx2160ardb

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 14:04:09 +05:30
Yinbo Zhu
be852314dc dts: armv8: add emmc hs200 support for ls1012ardb
Add emmc hs200 support for ls1012ardb

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12 14:03:10 +05:30
Kever Yang
86b4a6db68 rockchip: rk3399: dts: add boot order for rockpro64
The rk3399 rockpro64 board can boot from emmc and sdcard.
TODO: add spiflash as boot device.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-11 16:16:12 +08:00
Tom Rini
40e362a9ab Merge tag 'mmc-9-6-2019' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmc
Bug fixes to mmc_spi
Add Aspeed SD driver
Fix dw_mmc timeout calculation
Fix timeout values passed to mmc_wait_dat0
sdhci dt caps/mask update

[trini: Fix evb-ast2500_defconfig CONFIG_MMC line]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-09-08 21:15:13 -04:00
Eddie James
30231e0ddb ARM: dts: ast2500: Add SDHCI nodes
Add nodes for the Aspeed SD controllers with their necessary properties.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
2019-09-05 15:27:31 +08:00
Alex Marginean
7660d5c120 arm: dts: Set custom names for cp110 master/slave MDIO buses
Implicitly Marvell MDIO driver uses DT node names for devices, but in this
case that is not unique.  Set MDIO device names for master/slave to
cpm/cps.

Signed-off-by: Alex Marginean <alexm.osslist@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-09-04 11:37:19 -05:00
Tom Rini
d22c8be964 Merge branch 'master' of git://git.denx.de/u-boot-sh
- r8a66597 usb changes
2019-09-01 13:33:12 -04:00
Patrick Delaunay
5d2901a4b6 stm32mp1: Add remoteproc support for m4 coprocessor
Alignment with kernel patch proposal for binding:

[PATCH v4 0/8] stm32 m4 remoteproc on STM32MP157c
https://lkml.org/lkml/2019/5/14/159

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 11:19:23 +02:00
Patrick Delaunay
5e959ab85e stm32mp1: board: Update the way vdd-supply is retrieved from DT
Due to kernel DT alignment, pwr-supply is renamed to vdd-supply
and is a subnode of pwr-regulators.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 11:19:23 +02:00
Patrick Delaunay
dd2810851e stm32mp1: board: support of error led on ed1/ev1 board
Create a function led_error_blink and add node in device
tree.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 11:19:23 +02:00
Patrick Delaunay
d573e46168 stm32mp1: board: enable v1v2_hdmi and v3v3_hdmi regulator on dk2 boot
As for Audio codec IC, HDMI IC is not "IO safe".
HDMI regulators (v3v3 and v1v2) must be enabled to allow
I2C1 bus usage. HDMI IC must be under reset during power up
and keep HDMI and AUDIO devices in reset while they are not
used in U-Boot to keep them in low power mode
(each device can be kept in reset independently keeping their
power supplies ON until kernel).

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 11:19:23 +02:00
Patrick Delaunay
7acda7eae5 ARM: dts: stm32mp1: add pull-up on serial rx of console connected to STLINK
Avoid U-Boot auto-boot interruption for line break detection
on console when the RX line connected to STLINK is floating
(-IO error in getc cause by framing error and testc return 1)
Same workaround is applied on all the STMicroelectonics board.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 09:36:56 +02:00
Patrick Delaunay
9c2214b489 ARM: dts: stm32mp1: add key support on DK1/DK2
Allow to use PA13 and PA14 to force fastboot mode or STM32CubeProgrammer
mode.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 09:36:56 +02:00
Patrick Delaunay
2c2580984a ARM: dts: stm32mp1: add ldtc pre-reloc proper in SOC file
The pre-relocation probe is needed to reserve video frame buffer
in video_reserve() for all the board;
LDTC must be tagged prereloc in SOC U-Boot dtsi file.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 09:36:56 +02:00
Patrick Delaunay
67b7684f8c ARM: dts: stm32mp1: Add PSCI node access before relocation
Add node in DT and avoid error to search UCLASS_SYSRESET in
board_f.c::print_resetinfo() and lost 1.6s in U-Boot
for the trusted boot chain.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 09:36:56 +02:00
Patrick Delaunay
6d923007d6 ARM: dts: stm32mp1: Add iwdg2 support for SPL
This patch adds independent watchdog support for stm32mp157c
in SPL.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 09:36:56 +02:00
Patrick Delaunay
be16c41f85 ARM: dts: stm32mp1: DDR config v1.45
Update DDR configuration with the latest update:
- Change DQSGE to 1 for DDR3, to cure missing DQS preamble.

Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 09:36:56 +02:00
Patrick Delaunay
fe91533644 ARM: dts: stm32mp1: sync device tree with v5.3-rc2
Synchronize device tree with v5.3-rc2 label and
update the associated u-boot dtsi.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27 09:36:56 +02:00
Patrice Chotard
0203050e57 ARM: dts: stih410-b2260: Sync DT with kernel v5.2
Synchronize U-boot DT with kernel v5.2 for stih410-b2260.
Update stih410-b2260-u-boot.dtsi accordingly.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-08-27 09:36:56 +02:00
Adam Ford
5adbc0e5ca ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
When the pinmux configuration was added, it was accidentally placed into
the omap3_pmx_wkup node  when it should have been placed into the
omap3_pmx_core.  This error was accidentally propagated to U-Boot by
me when I blindly copied the device tree from Linux.

This patch moves the i2c2_pins and i2c3_pins to the correct node
which should eliminate i2c bus errors and timeouts due to the fact
the bootloader uses the save device tree that no longer properly
assigns these pins.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-08-26 11:46:20 -04:00
Kever Yang
cb8c492f20 rockchip: rk3288: remove fennec board support
Since there is no one using this board, remove it.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-23 15:27:40 +08:00
Kever Yang
08bbe44424 rockchip: dts: rk3328-rock64: fix usb power supply
According to rock64 schemetic, both VCC_HOST1_5V and VCC_HOST_5V are
controlled by USB20_HOST_DRV(GPIO0A2), fix it so that we can get correct
power supply for USB HOST ports.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-23 15:27:40 +08:00
Kever Yang
2e91e2025c rockchip: rk3328: migrate u-boot node to -u-boot.dtsi
Move all the nodes only shown in u-boot to -u-boot.dtsi to make
rk3328.dtsi clean.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-23 15:27:40 +08:00
Kever Yang
8e5c8571fe rockchip: dts: rk3328-rock64: enable usb3 xhci controller
Rock64 has a USB3.0 port, enable the controller so that we can use it.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-23 15:27:40 +08:00
Marek Vasut
be1e9dc080 ARM: renesas: Enable R8A66597 USB host on GR Peach
Enable USB host support on GR Peach board.

To use USB host on GR Peach, it might be necessary to solder JP3 header
onto the board first and then short it. Shorting JP3 is mandatory to let
the U5 regulator to supply VBUS to the CN3 USB port.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-22 18:23:37 +02:00
Chuanhua Han
f3b6a711a4 armv8: dts: ls1088aqds : Add pcf2127 node
Add the pcf2127-rtc node under the i2c0->i2c-mux@77->i2c@3 for ls1088aqds boards.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22 09:07:36 +05:30
Chuanhua Han
96d3fb4146 armv8: dts: ls1088ardb: Add slave nodes under the i2c0 controller
This patch adds some slave nodes to support the i2c dm on the device
side under the i2c0 controller.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22 09:07:36 +05:30
Chuanhua Han
c2eda95a5b armv8: dts: ls1088a: add I2C node support
One ls1088a, there are four I2C controllers. So add all I2C node
for ls1088a in device tree.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22 09:07:36 +05:30
Chuanhua Han
1703aaff8b armv8: dts: ls2088aqds : Add ds3232 node
Add the ds3232-rtc node under the i2c0->i2c-mux@77->i2c@0 for ls2088aqds
boards.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22 09:07:36 +05:30
Chuanhua Han
6672ab1628 armv8: dts: ls2088ardb: Add slave nodes under the i2c0
Add some slave nodes to support the i2c dm on the device side under the i2c0.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22 09:07:36 +05:30
chuanhua han
407916f5d7 armv8: dts: fsl-ls2088a: add i2c node support
One ls2088a, there are four I2C controllers. So add I2C nodes in dts
for ls2088a.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22 09:07:36 +05:30
Chuanhua Han
bd9b0745f7 armv8: dts: ls1028aqds: Add pcf2127 node under i2c1
Add the pcf2127-rtc node under the i2c1 in dts for ls1028aqds boards.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Alex Marginean <alexm.osslist@gmail.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22 09:07:35 +05:30
Chuanhua Han
25d9467c16 armv8: dts: ls1028aqds: Add pca9547 node under the i2c0 controller
Add pca9547 node to support i2c multiplexer under the i2c0 controller
in dts for ls1028aqds boards.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Alex Marginean <alexm.osslist@gmail.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22 09:07:35 +05:30
Chuanhua Han
e120d1277d armv8: dts: ls1028ardb: Add slave nodes under the i2c0 controller
Add some slave nodes to support the i2c dm on the device side under the i2c0.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Alex Marginean <alexm.osslist@gmail.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22 09:07:35 +05:30
Chuanhua Han
07cb35fb71 armv8: dts: lx2160aqds : Add pcf2127 node
Add the pcf2127-rtc node under the i2c0->i2c-mux@77->i2c@3 in dts for
lx2160aqds boards.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22 09:07:35 +05:30
Chuanhua Han
29b9e66683 armv8: dts: lx2160ardb : Add the "u-boot, dm-pre-reloc" for i2c0
Lx2160ardb need to use i2c0 before relocation, so we also need to set
u-boot, dm-pre-reloc to initialize node before relocation.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22 09:07:35 +05:30
Chuanhua Han
16c22fb39d armv8: dts: Add pcf2127 node for lx2160ardb
Adds the pcf2127-rtc node under the i2c4 node dts of lx2160ardb boards.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22 09:07:35 +05:30
Chuanhua Han
d1edea248a armv8: dts: fsl-lx2160a: add i2c controller and gpio DT nodes
In lx2160a soc, there are eight i2c controllers, this patch adds i2c
nodes for lx2160a, and the gpio2 nodes on which the i2c4 controller
depends.

Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22 09:07:35 +05:30
Suniel Mahesh
c8e8de138e arm: dts: Makefile: clean *dtb_HS
TI HS platforms generate *dtb_HS binary blobs and there is no
rule for cleanup. Added entry for cleanup in clean-files target.

Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-08-20 11:46:38 -04:00
Levin Du
8a681f4c5a rockchip: rk3399: Add ROC-RK3399-PC support
Add initial support for ROC-RK3399-PC board.

Specification
- Rockchip RK3399
- LPDDR4 4GiB
- eMMC slot
- SD card slot
- RTL8211E 1Gbps
- HDMI Out, DP, MIPI DSI/CSI, EDP
- PCIe M.2
- USB 2.0, USB-3.0
- USB C Type

Commit details of rk3399-roc-pc.dts sync from Linux v5.2:
"arm64: dts: rockchip: add support for ROC-RK3399-PC board"
(sha1: 8bb878cf20ae10809c36db96993bfce7026d062b)

Signed-off-by: Levin Du <djw@t-chip.com.cn>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-19 12:43:26 +08:00
Tom Rini
88c7a0a8c2 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell
- Various improvements to Keymile boards - mostly DT conversation
  (Pascal & Holger)
- Removal of now unsupported Keymile boards (Pascal & Holger)
- Small MVEBU PCI fix (Marek)
- Turris Omnia defconfig update (Marek)
- Misc Allied Telesis defconfig updates (Chris)
2019-08-12 23:03:44 -04:00
Tom Rini
60f38d82c4 - amlogic: add support for the SEI Robotic SEI510
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAl1RU+gACgkQd9zb2sjI
 SdE/OBAAgytrPuru4s5bBwIqBpMk2IbmNsuAOG6FY6plXpUyaYRsn+wUZikPkkif
 Wv9f/iB2Zv7wHtKnMbM8dafCViaMmU7m5mF71GS2Xt7dEfZZQWN/RWwKe5UfTVxF
 7hI5RU6OQMN8kwEB/AJIoFzhxzND9I2E5gocAafGn+dakmxoNR54rr//7DGlULNM
 kOYucXV5oYwDxc14nUXkYP13UrKds0bN0iWk+s367uPUcUuzEprD+/LV0NYTqLMp
 udCE0RLEvA8b3TxZeR9skjPWwBFc7crzWRsVDBdKujmTEvsZdEoBo0FbqEn6nr1u
 m5Q2dMYn2TvRHL4t7fppeqAryjE6JPmyuHUE4F+umvIs3QOjijgTPmG3pC0Trb1Z
 +iXrcoBbv+/zCbt5TQpPqYwW9wp3VSHGZlY9NZKS+Lwo/+Kj+JEXjzmzpASO8ruU
 5NCQE1mNZtb/i2UDN649NptoNSxV+jP5qjh9rJZuQMF5oL6e3UMrfz/d7EeWOvSY
 MKRZIGm+HEPXwR7dOleHAuHDHBZ5ztWGlYyNMjtgTvgHk499tvvZYQ00LrHU1Uze
 wKeK3uN5UQujcJf14wM2AhHZhB22ZUy4onshY8rI4lUq1oRpc8nZ+31R+xXmuC/o
 wt+KmyTdD4Eva1batGmM1zpl3bSgDndyBo5FNlWH1xY5jZU/6Ro=
 =M0sg
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20190812' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

- amlogic: add support for the SEI Robotic SEI510
2019-08-12 23:03:35 -04:00
Tom Rini
9c6115822e Merge branch '2019-08-11-ti-imports'
- More DaVinci updates and fixes
- PCIe support on am65x
- Watchdog converted to DM
- Assorted other bugfixes
2019-08-12 18:47:53 -04:00
Sekhar Nori
476e991452 arm: dts: k3-am65: add support for PCIe and SERDES
Add needed device-tree nodes to support PCIe 0
and SERDES on AM65x SoC. The nodes are kept
disabled by default.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-08-12 13:33:40 -04:00
Hannes Schmelzer
60df809f62 board/BuR/brsmarc1: initial commit
This commit adds support for the B&R brsmarc1 SoM.

The SoM is based on TI's AM335x SoC.
Mainly vxWorks 6.9.4.x is running on the board,
doing some PLC stuff on various carrier boards.

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-08-12 13:33:37 -04:00
Neil Armstrong
cddca4b4ca ARM: dts: Import Amlogic G12A SEI510 DT from Linux 5.3-rc1
Import Linux 5.2-rc1 sei510 DT from 5f9e832c1370 ("Linus 5.3-rc1") for the
meson-g12a-sei510 board.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-08-12 10:02:30 +02:00
Pascal Linder
b75e9e3fce km/uart: port UART interface of KM Kirkwood boards to driver model
Activate the driver model for the serial interface in the KM Kirkwood
Kconfig file. The associated preprocessor definitions could be removed
from the header file. However, the clock of 200 MHz needs to be declared
in the device tree.

Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch>
Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-08-12 09:12:38 +02:00
Manivannan Sadhasivam
881b6324f0 arm: dts: Add devicetree for Hikey960 board
This commit adds devicetree for Hikey960 board. Most of the contents are
copied from Linux kernel with some modifications for u-boot. To be
more precise, SD card's speed related properties are removed due to a
bug in u-boot clock implementation. Hence forcing the SD controller to
work in standard speed.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-08-11 16:43:41 -04:00
Manivannan Sadhasivam
af8a735ed0 arm: dts: Import HI3660 devicetree from Linux
This commit imports HI3660 SoC devicetree from Linux

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-08-11 16:43:41 -04:00
Tom Rini
feb5a02f86 Merge branch 'master' of git://git.denx.de/u-boot-sh
- R8A77980 V3H support
2019-08-10 17:57:58 -04:00
Marek Vasut
3ebb91914f ARM: renesas: Add R8A77980 V3H Condor board code
Add board code for the R8A77980 V3H Condor board.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-08-09 23:15:01 +02:00
Marek Vasut
a811e19b91 ARM: dts: renesas: Add R8A77980 V3H DTs and headers
Import R8A77980 V3H DTs and headers from Linux 5.2.7 , commit 5697a9d3d55f.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-08-09 23:15:01 +02:00
Marcel Ziswiler
4c63a601b9 apalis-tk1: support v1.2 hardware revision
Support the V1.2 hardware revision with the following pin muxing
changes:

Ddc_scl_pv4 and ddc_sda_pv5 previously used as Apalis GPIO3 and GPIO4
are now used as DDC pins.

Gen2_i2c_scl_pt5 and gen2_i2c_sda_pt6 previously used as DDC pins are
now used as USB power enable signals.

Usb_vbus_en0_pn4 and usb_vbus_en1_pn5 previously used as USB power
enable signals are now used as GPIO3 and GPIO4.

Additionally a new device tree file tegra124-apalis-v1.2-eval.dtb is
loaded on V1.2 and later modules and resp. USB power enable signals
activated.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-08-09 10:01:35 -07:00
Tom Rini
21bc1935b1 Merge tag 'u-boot-rockchip-20190809' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- Add rk3399 boards Khadas Edge/-V/-Captain
- Add fully souce code support for rk3328 including TPL/DRAM init
- Enable boot from eMMC for rk3399 rock960/ficus boards
- turn on the IO supply for dw_mmc
2019-08-09 07:29:20 -04:00
Ryder Lee
4f3ee271eb ARM: dts: add hifsys reset for MediaTek SoCs
This adds missing hifsys reset parts in header files.

Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
2019-08-07 15:31:03 -04:00
Weijie Gao
102b0b1119 arm: dts: change MT7629 to use spi-mem rather than qspi
The original mtk_qspi driver has been removed. We change MT7629 to use
newly added mtk-spimem driver.

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2019-08-07 12:44:12 -04:00
Kever Yang
ec552bf036 rockchip: dts: rk3328: update dmc node for driver
Update dmc node for full feature driver.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
[cherry picked from commit 1e14956365 with minor modifications]
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05 21:14:53 +08:00
Matwey V. Kornilov
86e999f1a5 rockchip: dts: rk3328: Add rk3328-evb-u-boot.dtsi
Split u-boot specific dts configuration to separate
rk3328-evb-u-boot.dtsi

Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05 21:14:30 +08:00
Manivannan Sadhasivam
b06def3572 arm: dts: ficus: Enable booting from eMMC when using SPL
This commits enables booting from eMMC when using SPL on 96Boards
Ficus board by adding SDHCI to boot order. Since the SDHCI driver
already has the reloc flag, this works straightaway. While we are at it,
let's also include the common u-boot dtsi for rk3399.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05 21:14:13 +08:00
Manivannan Sadhasivam
0b5130fa3e arm: dts: rock960: Enable booting from eMMC when using SPL
This commits enables booting from eMMC when using SPL on 96Boards
Rock960 board by adding SDHCI to boot order. Since the SDHCI driver
already has the reloc flag, this works straightaway. While we are at it,
let's also include the common u-boot dtsi for rk3399.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05 21:14:04 +08:00
Nick Xie
a5f1249bd3 arm64: dts: rockchip: Add support for Khadas Edge-Captain
Add devicetree support for Khadas Edge-Captain.
Khadas Captain is the carrier board for Khadas Edge.

Specification
- Rockchip RK3399
- Dual-Channel 2GB/4GB LPDDR4
- SD card slot
- Onboard 16GB/32GB/128GB eMMC
- RTL8211FD 1Gbps
- AP6356S/AP6398S WiFI/BT
- HDMI Out, DP, MIPI DSI/CSI, eDP
- USB 3.0, 2.0
- USB Type C power and data
- GPIO expansion ports
- Full 4 Lane M.2 Socket
- 16MB SPI Flash
- IR
- Programmable MCU

Commit details of rk3399-khadas-edge-*.dts sync from Linux 5.3-rc2:
"arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards"
(sha1: c2aacceedc86af87428d998e23a1aca24fd8aa2e)

Signed-off-by: Nick Xie <nick@khadas.com>
Tested-by: Chris Webb <chris@arachsys.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05 21:12:23 +08:00
Nick Xie
6ce9ba02b1 arm64: dts: rockchip: Add support for Khadas Edge-V
Add devicetree support for Khadas Edge-V.
Khadas Edge-V is a Khadas VIM form factor Rockchip RK3399 board.

Specification
- Rockchip RK3399
- Dual-Channel 2GB/4GB LPDDR4
- SD card slot
- Onboard 16GB/32GB/128GB eMMC
- RTL8211FD 1Gbps
- AP6356S/AP6398S WiFI/BT
- HDMI Out, DP, MIPI DSI/CSI, eDP
- USB 3.0, 2.0
- USB Type C power and data
- GPIO expansion ports
- Full 4 Lane M.2 Socket
- 16MB SPI Flash
- IR
- Programmable MCU

Commit details of rk3399-khadas-edge-*.dts sync from Linux 5.3-rc2:
"arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards"
(sha1: c2aacceedc86af87428d998e23a1aca24fd8aa2e)

Signed-off-by: Nick Xie <nick@khadas.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05 21:05:56 +08:00
Nick Xie
a839828fa1 arm64: dts: rockchip: Add support for Khadas Edge
Add devicetree support for Khadas Edge.
Khadas Edge is an expandable Rockchip RK3399 board with goldfinger.

Specification
- Rockchip RK3399
- Dual-Channel 2GB/4GB LPDDR4
- Onboard 16GB/32GB/128GB eMMC
- RTL8211FD 1Gbps
- AP6356S/AP6398S WiFI/BT
- HDMI Out, DP
- USB 3.0, 2.0
- USB Type C power and data
- 16MB SPI Flash
- Programmable MCU

Commit details of rk3399-khadas-edge-*.dts sync from Linux 5.3-rc2:
"arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards"
(sha1: c2aacceedc86af87428d998e23a1aca24fd8aa2e)

Signed-off-by: Nick Xie <nick@khadas.com>
Tested-by: Chris Webb <chris@arachsys.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05 21:05:29 +08:00
Matwey V. Kornilov
16593ccd07 rockchip: rk3328: enable DMA for MMCs at Rock64
DMA for MMCs can be enabled, since the previous patch fixes
the following issue in SPL:

    Trying to boot from MMC1
    spl: mmc init failed with error: -110
    SPL: failed to boot from all boot devices
    ### ERROR ### Please RESET the board ###

Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05 21:05:16 +08:00
Tom Rini
bbaf56eda0 - sync Amlogic G12A DT with linux 5.3-rc1
- add support for 4GiB DRAM memory
 - add support for Amlogic G12B based Odroid-N2
 - small duplicate logic fix for gxbb clock driver
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAl1BkXMACgkQd9zb2sjI
 SdGd+Q/+IdXgTvox69NbfvhyA8d7GwhTWVIKgrF3NvHpxYqvvxmC7gTx1Qdh5sAO
 vyKsuygim9R/Rt7X7bzE/a1gKju/DpkxFJ0hx148xDJXmtzeBSWmDO/oOnZpUZRM
 aRUjncjxvMOZ3axtsWAZSiKqDF5i/K9Y3v/6JaLCs3WmVzlLrgANUSWqdC/Qc1Ka
 HLjem/ug3HK+o/zg0pXS3VguOTOMEV63hlWHlo2jKnxLmBpxcp1O7kH8noKR90+P
 x/byo+GAzayYv6oS0yeUz8YEXIMDVdkEX0eFzkRfe7ykz5lwGONdpLcdjmIIk6nO
 Kef7HNsRTb5ku9QPlgVLHodHNeGsV3axvmPLJQDki6/sgQmZSBWsUWPNt0yZuUjT
 gU2o7XoNmIh49hxk8ShDttGkCAYmacJwhQZ0TMV2q8q0YkDmeTWpzY5JIWq5VRLj
 0W9moxSO5SieM0FSwR/v7J2egPrz0ocOSs7XpQqH7ZNduBjq0jHwhS7Yu8wcbXTA
 baBta3tBKJhjYpfPrexrWOw1NW2fwW5kJJpnMY68nDG/ygTb++syVvTjjiqTfemI
 kIs6aBZ0AEo7WMrehdtHRFmW9SQC6h5h0Ji7bR20TigSGLe+5f0R8tASDD+0FXLB
 KID+sigdyHxM9B6uACR1pOqCjEb+IyyFXJno38v7DjaW/IoyC3k=
 =Q5fc
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20190731' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

- sync Amlogic G12A DT with linux 5.3-rc1
- add support for 4GiB DRAM memory
- add support for Amlogic G12B based Odroid-N2
- small duplicate logic fix for gxbb clock driver
2019-07-31 16:06:24 -04:00
Adam Ford
2fd156b307 ARM: dts: da850-evm: Fix MDIO pinmux
In attempts to speed up SPL and reduce size, the MDIO pin muxing
was inadvertently affected.  Since the ethernet driver will setup
the pin muxing when ethernet is loaded, this patch will also
pinmux the MDIO pins at the same time.  Once an DM compatible
MDIO driver is available, this  can be removed.

Fixes: 877ab2423b ("ARM: davinci: da850: Manual pinmux only
when PINCTRL not available")

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-31 13:08:07 -04:00
Suman Anna
dcddf0fd83 arm: dts: k3-am654-base-board: Fix cpsw_nuss power-domains property
The commit 355be915ed ("arm: dts: k3-am654: Update power-domains
property for each node") has updated the power-domain cells value
and updated power-domains property in various existing dts nodes but
missed updating the cpsw_nuss node. This results in the following
build warning, fix this.

arch/arm/dts/k3-am654-base-board.dtb: Warning (power_domains_property): /interconnect@100000/interconnect@28380000/cpsw_nuss@046000000:power-domains: property size (8) too small for cell size 2
arch/arm/dts/k3-am654-r5-base-board.dtb: Warning (power_domains_property): /interconnect@100000/interconnect@28380000/cpsw_nuss@046000000:power-domains: property size (8) too small for cell size 2

Fixes: 355be915ed ("arm: dts: k3-am654: Update power-domains property for each node")
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-31 13:08:07 -04:00
Neil Armstrong
0d84acb00a ARM: dts: add support for Odroid-N2
Import HardKernel Odroid-N2 DT from Linux 5.3-rc1, commit 5f9e832c1370
("Linus 5.3-rc1") based on an Amlogic G12B S922X SoC.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Mark Kettenis <kettenis@openbsd.org>
2019-07-31 12:10:50 +02:00
Neil Armstrong
d93757f2f6 ARM: dts: Sync Amlogic G12A with Linux 5.3-rc1
Sync the Amlogic Meson G12A DT and Bindings file with the Linux 5.3-rc1
from the commit 5f9e832c1370 ("Linus 5.3-rc1").

Also remove the meson-g12a-u-boot.dtsi and meson-g12a-u200-u-boot.dtsi,
now conflicting with the main DT content.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Mark Kettenis <kettenis@openbsd.org>
2019-07-31 12:10:42 +02:00
Tom Rini
476a3143d7 Xilinx/FPGA changes for v2019.10
fpga:
 - Xilinx virtex2 cleanup
 - Altera cyclon2 cleanup
 
 zynq:
 - Minor Kconfig cleanup
 - Add psu_init configuration for Z-turn board
 
 zynqmp:
 - Add support for pmufw config passing to PMU
 - script for psu_init conversion
 - zcu1275 renaming
 
 xilinx:
 - Add support for UltraZed-EV SoM
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXUBgGwAKCRDKSWXLKUoM
 IcJJAKCUoHRpqNgcZUiE10D9/VhZ3bUVtwCgi0fzSlqgHVG2EzApfqN+2KfrGJo=
 =7i0K
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2019.10' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx/FPGA changes for v2019.10

fpga:
- Xilinx virtex2 cleanup
- Altera cyclon2 cleanup

zynq:
- Minor Kconfig cleanup
- Add psu_init configuration for Z-turn board

zynqmp:
- Add support for pmufw config passing to PMU
- script for psu_init conversion
- zcu1275 renaming

xilinx:
- Add support for UltraZed-EV SoM
2019-07-30 19:19:34 -04:00
Tom Rini
dcf722ece6 Merge branch 'master' of git://git.denx.de/u-boot-sh 2019-07-30 19:19:04 -04:00
Luca Ceresoli
ac80ac09c8 arm64: zynqmp: add support for Avnet UltraZed-EV Starter Kit
Avnet UltraZed-EV Starter Kit is composed by the UltraZed-EV SoM and the
only publicly-available compatible carrier card. The SoM is based on the EV
version of the Xilinx ZynqMP SoC+FPGA.

The psu_init_gpl.c file has been generated from the board definition files
at [0] using Vivado 2018.3 and then minimized by
tools/zynqmp_psu_init_minimize.sh. Manually removed serdes init code since
it is not mentioned in device tree and fixed a checkpatch error.

[0] 3686c9ff7d/ultrazed_7ev_cc/1.1

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30 10:20:06 +02:00
Michal Simek
420d446781 arm64: zynqmp: Rename zc1275 to zcu1275
Name of this platform has changed and released to customers that's why
name has also changed.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Series-to: uboot
2019-07-30 10:20:06 +02:00
Tom Rini
333755ef7b Merge branch '2019-07-29-ti-imports'
- More DaVinci DM migration, drop am18xx EVM platform
- Keystone bug fix
2019-07-29 17:59:15 -04:00
Bartosz Golaszewski
95cffd9906 davinci: da850-evm: enable driver model for NAND
Enable the driver-model on da850-evm. We need to add a dummy nand node
to the device tree, as the real nand node is a sub-node of the aemif
device.

On linux the aemif driver populates all its child nodes, but we can't do
it in u-boot currently.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Tested-by: Adam Ford <aford173@gmail.com> #da850-evm
2019-07-29 17:58:52 -04:00
Bartosz Golaszewski
f5a47554e0 davinci: omapl138-lcdk: enable driver model for NAND
Enable the driver-model on da850-lcdk. We need to add a dummy nand node
to the device tree, as the real nand node is a sub-node of the aemif
device.

On linux the aemif driver populates all its child nodes, but we can't do
it in u-boot currently.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29 17:58:52 -04:00
Tom Rini
2d64a0f7e9 Merge branch '2019-07-29-master-imports'
- Assorted bug fixes
2019-07-29 11:51:17 -04:00
Fabien Parent
bb4c5d6055 board: mediatek: Add pumpkin board support
The pumpkin board is made by Gossamer Engineering and is using
a MediaTek SoC. The board currently comes in two available version:
MT8516 SoC and MT8167 SoC.
The board provides the following IOs: eMMC, NAND, SD card, USB type-A,
Ethernet, Wi-Fi, Bluetooth, Audio (jack out, 2 PDM port, 1 analog in),
serial over USB, and an expansion header.

Additionally there is a HDMI port, DSI port, and camera port only
on the MT8167 version of the board.

The board can be powered by battery and/or via a USB Type-C port and
is using a PMIC MT6392.

The eMMC and NAND are sharing pins and cannot be used together.

This commit is adding the basic boot support for the Pumpkin MT8516
board on the eMMC.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
2019-07-29 09:32:11 -04:00
Tom Rini
ad4a699cfe - dcu and imx7 DM_VIDEO conversion
- lb070wv8 compatible in simple_panel driver
 - bmp_logo improvements for DM_VIDEO
 - EDID updates to filter supported modes
 - meson_dw_hdmi: support EDID mode filtering
 - dw_hdmi: support ddc-i2c-bus phandle for external I2C masters
 - fix rpi crash when firmware doesn't report connected display
 -----BEGIN PGP SIGNATURE-----
 
 iGwEABECACwWIQSC4hxrSoIUVfFO0kRM6ATMmsalXAUCXT6z3g4cYWd1c3RAZGVu
 eC5kZQAKCRBM6ATMmsalXNhfAJ9r0ewu4sKAiLZl7fcOoYYjgz30TACeIrchuxwH
 x9SiZYFntOLL0trK/O0=
 =ZsD5
 -----END PGP SIGNATURE-----

Merge tag 'video-for-2019.10' of https://gitlab.denx.de/u-boot/custodians/u-boot-video

- dcu and imx7 DM_VIDEO conversion
- lb070wv8 compatible in simple_panel driver
- bmp_logo improvements for DM_VIDEO
- EDID updates to filter supported modes
- meson_dw_hdmi: support EDID mode filtering
- dw_hdmi: support ddc-i2c-bus phandle for external I2C masters
- fix rpi crash when firmware doesn't report connected display
2019-07-29 09:02:46 -04:00
Tom Rini
c957be9ba0 Merge tag 'u-boot-rockchip-20190729' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- Clean up and migrate to use common rockchip spl board file
- Clean up and migrate to use common rockchip board file
- Increase rk3288 CONFIG_SYS_BOOTM_LEN to 16MB
2019-07-29 09:02:15 -04:00
Kever Yang
68907a0a58 rockchip: rk3288-veyron: Migrate "u-boot, boot0" to "u-boot, spl-boot-order"
"u-boot,spl-boot-order" is more flexible and other rockchip SoCs
has convert to use it, migrate to use the new dts property.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Kever Yang
65ea919bf7 rockchip: phycore: remove no use "u-boot, boot0" in dts
We are using "u-boot,spl-boot-order" now and re-use the
definition from rk3288-u-boot.dtsi, so remove it directly here.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-29 10:25:27 +08:00
Igor Opaniuk
1c7bade847 ARM: dts: colibri-imx6ull: extend lcdif node
Provide proper display timings for lcdif node, used by mxsfb DM_VIDEO
enabled framebuffer driver.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-29 00:12:02 +02:00
Igor Opaniuk
34b773d507 ARM: dts: colibri_imx7: Fix lcdif node definition
Fix lcdif DT node and make it conform to the structure defined in the
Linux devicetree bindings [1]. Currently there is support only for
old style lcdif node definitions.

[1] https://www.kernel.org/doc/Documentation/devicetree/bindings/display/mxsfb.txt

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-29 00:11:29 +02:00
Igor Opaniuk
750c68a7a7 ARM: dts: colibri_vf: Add dcu0 node
Add dumb node for NXP Display Control Unit0(DCU), which permits DM_ENABLED
converted driver to be probed. Currently no display timings are provided
in this node.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-07-29 00:09:19 +02:00
Tom Rini
75551c8bfc Merge branch '2019-07-26-ti-imports'
- Bring in the rest of the J271E platform
- Various OMAP3/AM3517, DA850 fixes
2019-07-27 19:50:52 -04:00
Adam Ford
f3996aef8c ARM: dts: Logic PD SOM-LV and Torpedo Boards: Resync DTS
Re-sync all Logic PD OMAP35 and AM/DM37 boards with Kernel
5.2.1

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-27 13:36:53 -04:00
Tom Rini
df9a7a195b u-boot-imx-20190719
- CCF for i.MX6
 - nandbcb command to write SPL into NAND
 - Switch to DM (i.MX28)
 - Boards: Toradex, engicam, DH
 - Fixes for i.MX8
 - Fixes for i.MX7ULP
 
 Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/561147504
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl0y6dgPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3iDYL/AgznVr7kSHoYpSGfBp8pH3R1UdUiQFg437+
 9/wqMJM5Txm1aK7qTW2u5I7qzIpGw0LMPZ7CDQhWJa1Z0hdNWf/1lMzCVOPvCl1v
 C0TK5hx3ufyfgpkGdkPvVXTmn0f8tdiqtS8zQOLVntPe5dIuOySS0MbD9K4Xewfm
 sVYO0p6F1q+EHbRGw33kIX3/ST8wuj7Iki0AFiZ2hAImHO7UeZP2X3k31kbhs+ZB
 /uhUit3Rn0nc5sIqiiP6Ptfjp8eq13LwWbSwJzezCQssmkTn14z6rrgwUcNuXNlh
 Vi88kJr2ObkFgwUpQCWss+sHzyJQkTX/iLz52FCWB4Ruzr6zGr/4ONLT/iDP0Ydl
 ncO3v8uqLpAeB7kdkt8JRJhq62qihdZc6mdN2YJoCYUZSlR3gxzKmXvT+drglsOi
 B78KoU/MgQ10REQ9IoTRLhQc1gwTF8LJSyfz5hjRGoMhD/Ek5WAQJaMlxDg67Ai8
 HB4lUNjkCV58HdP1+zIWJbbxrDc/lg==
 =LNOs
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20190719' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20190719

- CCF for i.MX6
- nandbcb command to write SPL into NAND
- Switch to DM (i.MX28)
- Boards: Toradex, engicam, DH
- Fixes for i.MX8
- Fixes for i.MX7ULP

Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/561147504
2019-07-27 09:35:05 -04:00
Adam Ford
9eed1ca15b ARM: am3517-evm: Migrate to SPL_OF_CONTROL
Like the other Logic PD OMAP35/DM37 boards, this board has device
tree enabled for U-Boot.  This patch converts the board to enable
SPL_OF_CONTROL and further shrinks the device tree in SPL to limit
it to UART3 (console), MMC1, i2c1, and GPIO4 (for mmc1 CD and WP).

There appears to be a bug in minicom so users may need to
switch the minicom terminal emulation to ANSI from VT102 due
to the junk that gets pushed out of the UART on startup.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-26 22:24:12 -04:00
Faiz Abbas
637fc2c991 ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay values
Update the MMC2_HS200_MANUAL1 iodelay values to match with the latest
dra76x data manual[1].

Also this particular pinctrl-array is using spaces instead of tabs for
spacing between the values and the comments. Fix this as well.

[1] http://www.ti.com/lit/ds/symlink/dra76p.pdf

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-07-26 22:24:11 -04:00
Faiz Abbas
6b66d2ee47 ARM: dts: am57xx: Disable voltage switching for SD card
If UHS speed modes are enabled, a compatible SD card switches down to 1.8V
during enumeration. If after this a software reboot/crash takes place and
on-chip ROM tries to enumerate the SD card, the difference in
IO voltages (host @ 3.3V and card @ 1.8V) may end up damaging the card.

The fix for this is to have support for power cycling the card in
hardware (with a PORz/soft-reset line causing a power cycle of the card).
Because the beaglebone X15 (rev A,B and C), am57xx-evms and am57xx-idks don't
have this capability, disable voltage switching for these boards.

The major effect of this is that the maximum supported speed mode is now
high speed(50 MHz) down from SDR104(200 MHz).

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-07-26 22:24:11 -04:00
Faiz Abbas
684af0be94 ARM: dts: am574x-idk: Add pinmuxes for mmc1 and mmc2
Sync with kernel dts by adding pinmuxes for mmc1 and mmc2. This fixes an
issue where mmc2 (eMMC) was coming up in HS52 mode instead of the
highest DDR52 mode.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-07-26 22:24:10 -04:00
Faiz Abbas
461918d7df ARM: dts: dra7-mmc-iodelay: Add a new pinctrl group for clk line without pullup
During a short period when the bus voltage is switched from 3.3v to 1.8v,
(to enumerate UHS mode), the mmc module is disabled and the mmc IO lines
are kept in a state according to the programmed pad mux pull type.

According to 4.2.4.2 Timing to Switch Signal Voltage in "SD Specifications
Part 1 Physical Layer Specification Version 5.00 February 22, 2016", the
host should hold CLK low for at least 5ms.

In order to keep the card line low during voltage switch, the pad mux of
mmc1_clk line should be configured to pull down.

Add a new pinctrl group for clock line without pullup to be used in boards
where mmc1_clk line is not connected to an external pullup.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-07-26 22:24:10 -04:00
Lokesh Vutla
aebb2a499e arm: dts: k3-j721e: Add r5 specific dt support
Add initial support for dt that runs on r5.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-07-26 21:49:29 -04:00
Lokesh Vutla
9a5e553cb4 arm: dts: k3-j721e: Add initial support for common processor board
Common Processor board is the baseboard that has most of the actual connectors,
power supply etc. A SOM (System on Module) is plugged on to the common
processor board and this contains the SoC, PMIC, DDR and basic highspeed
components necessary for functionality. Add initial dt support for this
common processor board.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-26 21:49:29 -04:00
Lokesh Vutla
eeb2e8b6eb arm: dts: ti: Add Support for J721E SoC
Add initial SoC definition for J721E SoC.
Kernel dts posted here:
https://lore.kernel.org/lkml/20190522161921.20750-1-nm@ti.com/

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-26 21:49:28 -04:00
Lokesh Vutla
355be915ed arm: dts: k3-am654: Update power-domains property for each node
Update the power-domain-cells to 2 and add the permissions
to each node. Mark the following nodes accessed by r5 as shared:
- DDR node
- main uart 0

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-26 21:49:23 -04:00
Jianchao Wang
8782122052 Add support for the NXP LS1021A-TSN board
The LS1021A-TSN is a development board built by VVDN/Argonboards in
partnership with NXP.

It features the LS1021A SoC and the first-generation SJA1105T Ethernet
switch for prototyping implementations of a subset of IEEE 802.1 TSN
standards.

Supported boot media: microSD card (via SPL), QSPI flash.

Rev. A of the board uses a Spansion S25FL512S_256K serial flash, which
is 64 MB in size and has an erase sector size of 256KB (therefore,
flashing the RCW would erase part of U-Boot).

Rev. B and C of the board use a Spansion S25FL256S1 serial flash, which
is only 32 MB in size but has an erase sector size of 64KB (therefore
the RCW image can be flashed without erasing U-Boot).

To avoid the problems above, the U-Boot base address has been selected
at 0x100000 (the start of the 5th 256KB erase sector), which works for
all board revisions. Actually 0x40000 would have been enough, but
0x100000 is common for all Layerscape devices.

eTSEC3 is connecting directly to SJA1105 via an RGMII fixed-link, but
SJA1105 is currently not supported by uboot. Therefore, eTSEC3 is
disabled.

Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com>
Signed-off-by: Jianchao Wang <jianchao.wang@nxp.com>
Signed-off-by: Changming Huang <jerry.huang@nxp.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>

[Vladimir] Code taken from https://github.com/openil/u-boot (which
itself is mostly copied from ls1021a-iot) and adapted with the following
changes:

- Add a008850 errata workaround
- Converted eTSEC, MMC to DM to avoid all build warnings
- Plugged in distro boot feature, including support for extlinux.conf
- Added defconfig for QSPI boot
- Added the board/freescale/ls1021atsn/README.rst for initial setup
- Increased CONFIG_SYS_MONITOR_LEN so that the SPL malloc pool does not
  get overwritten during copying of the u-boot.bin payload from MMC to
  DDR.
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-25 13:13:31 -05:00
Bin Meng
f588b4d205 arm: ls1021atwr: Convert to use driver model TSEC driver
Now that we have added driver model support to the TSEC driver,
convert ls1021atwr board to use it.

This depends on previous DM series for ls1021atwr:
http://patchwork.ozlabs.org/patch/561855/

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

[Vladimir] Made the following changes:
- Added 'status = "disabled";' for all Ethernet ports in ls1021a.dtsi
- Fixed the confusion between the SGMII/TBI PCS for enet0 and enet1 -
  a mistake ported over from Linux. Each SGMII PCS lies on the private
  MDIO bus of the interface (and the RGMII enet2 has no SGMII PCS).
- Added CONFIG_DM_ETH to all ls1021atwr_* defconfigs
- Completely removed non-DM_ETH support from ls1021atwr
- Changed "compatible" string from "fsl,tsec-mdio" to "fsl,etsec2-mdio"
  and from "fsl,tsec" to "fsl,etsec2" to match Linux
2019-07-25 13:13:31 -05:00
Alex Marginean
b32e9a7578 arm: dts: ls1028a updates for network interfaces
Defines LS1028A RDB SGMII port, QDS RGMII port.

Signed-off-by: Alex Marginean <alexm.osslist@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-25 13:13:30 -05:00
Tom Rini
ff8c23e784 - add rtc driver for stm32mp1
- add remoteproc driver for stm32mp1
 - use kernel qspi compatible string for stm32
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdNrGIAAoJEOKyvdngqpN1SVQH+gKENb24GRDN0VReylxbAB+v
 eEIN51GdnmwV2nxDAcpswUF9Vsf4rE5ZNO4qFDubvFEIltMknE6VBi1ywSqQKI4P
 Ft8xHX/xvTJ8hppVrCf0/nWCcULBesknbFncTlyey0AHUoqamKdQknp5wV7eC6sI
 IqpLV09i1Ftswc7XhYLpCsYpfmv15iGtZnvVtUAN1c/ArM9T1ZrApXrnJ/R3+/Xc
 ih0LMJr2tfEOHBEn03WcB9bMKmEqytQEv70nVcZ15ORw7Wh1vL+Lu5EGNv5HazF3
 AY/PnQ2P+J2v2OgrKjhEl7sUGDVBcanqchiaJzdnjYqy3uGXaJngNAV7hMqpsV4=
 =C8bt
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20190723' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm

- add rtc driver for stm32mp1
- add remoteproc driver for stm32mp1
- use kernel qspi compatible string for stm32
2019-07-23 14:16:21 -04:00
Eugeniu Rosca
89c00f009c ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.2
Backport and squash below Linux 5.2 commits for R-Car Gen3:

Commit id       * Summary line
6fffb98645e67b5   arm64: dts: renesas: r8a77990: ebisu: Add GPIO expander
b068ed6efe6244d   arm64: dts: renesas: r8a77990: Fix SPDX license identifier style
96c25882252704d ! arm64: dts: renesas: r8a7796: remove unneeded sound #address/size-cells
71ac75dffdae2f8   arm64: dts: renesas: r8a77990: ebisu: Enable LVDS1 encoder
9a0ff5c727b60a3   arm64: dts: renesas: r8a77995: draak: Enable LVDS1 encoder
9130c15829846fa   arm64: dts: renesas: ebisu: Fix adv7482 hexadecimal register address
191f7dcd1f5ea1f   arm64: dts: renesas: r8a77965: add SSIU support for sound
a8f6110e64422d5   arm64: dts: renesas: ebisu: Enable VIN5
4162aa9db3d4469   arm64: dts: renesas: r8a77995: draak: Enable CAN0, CAN1
af965ba3248edde   arm64: dts: renesas: r8a77990: Remove invalid compatible value for CSI40
1f4c123a98098cc   arm64: dts: renesas: r8a77990-ebisu: Add BD9571 PMIC
474706117c2baa6   arm64: dts: renesas: ebisu: Add PMIC DDR0 Backup Power config
e2fa79de7ecbef4   arm64: dts: renesas: Update Ebisu and Draak bootargs
de8e8daaf7190ef   arm64: dts: renesas: salvator-common: Sort node label
05f1d882d28b871   arm64: dts: renesas: r8a77995: draak: Fix EthernetAVB phy mode to rgmii
7a516e49d975311   arm64: dts: renesas: use extended audio dmac register
e3414b8c45afa5c   arm64: dts: renesas: salvator-common: Add GPIO keys support
720066d17c973fd   arm64: dts: renesas: r8a7795: Add CMT device nodes
99cb95103e2d058   arm64: dts: renesas: r8a77965: Add CMT device nodes
28a5c61b5136d58   arm64: dts: renesas: r8a77990: Add CMT device nodes
32d622f3290b2a1   arm64: dts: renesas: r8a77965: Remove reg-names of display node

(*) Patch id mismatch between Linux and U-Boot commit.
[!] Dropped changes in arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts,
    since the file doesn't exist in the U-Boot tree.

Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
2019-07-23 13:38:23 +02:00
Patrice Chotard
e2a39a6e30 ARM: dts: stm32: Use kernel qspi compatible string for stm32f469-disco-uboot.dtsi
For STM32 QSPI driver, "st,stm32-qspi" compatible string was first
introduced in U-boot. But later in kernel side, "st,stm32f469-qspi"
was used.
To simplify, align U-boot QSPI compatible string with kernel one.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-07-22 11:04:52 +02:00
Patrice Chotard
2cc83cedc1 ARM: dts: stm32: Use kernel qspi compatible string for stm32f7-uboot.dtsi
For STM32 QSPI driver, "st,stm32-qspi" compatible string was first
introduced in U-boot. But later in kernel side, "st,stm32f469-qspi"
was used.
To simplify, align U-boot QSPI compatible string with kernel one.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-07-22 11:04:52 +02:00
Kever Yang
1dea50fb22 rockchip: evb-px5: switch to use ARM generic timer
Default to use ARM generic timer in ARM64, switch from
rk timer to generic timer.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
08b902dc39 rockchip: rk3368-lion: switch to use ARM generic timer
Default to use ARM generic timer in ARM64, switch from
rk timer to generic timer.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
b39ab7f1e1 rockchip: rk3288: dts: enable spl-boot-order
We share the same default SPL boot order for all rk3288 boards,
use dts instead of hard code in board file.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
e124de6233 rockchip: popmetal-rk3288: add -u-boot.dtsi
Move U-Boot relate dts node/property into -u-boot.dtsi

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
5860d124e4 rockchip: miqi-rk3288: add -u-boot.dtsi
Move U-Boot relate dts node/property into -u-boot.dtsi

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
2ea3addfa2 rockchip: rk3288-firefly: sync sdmmc pinctrl from mainline
The rk3288-firefly board have different setting for sdmmc
io, sync then from kernel mainline:
6fbc7275c7a9 Linux 5.2-rc7

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
e4ea8f3c08 rockchip: firefly-rk3288: add -u-boot.dtsi
Move U-Boot relate dts node/property into -u-boot.dtsi

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
680028a92d rockchip: fennec-rk3288: add -u-boot.dtsi
Move U-Boot relate dts node/property into -u-boot.dtsi

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Kever Yang
d62be2f0d2 rockchip: evb-rk3288: add -u-boot.dtsi
Move U-Boot relate dts node/property into -u-boot.dtsi

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Jagan Teki
852f6ddd76 rockchip: dts: rk3399: rock-pi-4: Use LPDDR4-100 dtsi
Use LPDDR4-100 sdram timings dtsi for RockPI-4 board.

All these timings are processed during TPL stage of rock-pi-4 board,
bootchain. This make TPL would replace rockchip in house rkbin in
current bootchain.

Bootchain after and before this change:

   TPL -> SPL -> U-Boot proper

 rkbin -> SPL -> U-Boot proper

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Jagan Teki
9a7b8db9f0 rockchip: dts: rk3399: nanopi-neo4: Use DDR3-1866 dtsi
Use DDR3-1866 2GB ddr timings dtsi for 1GB NanoPi Neo4 board.

Since sdram rk3399 support dynamic stride and rank detection it
can able to detect 1GB ddr eventough the timings are meant for
dual channel, 2GB size.

Bootchain after and before this change are:

 TPL -> SPL -> U-Boot proper

 rkbin -> SPL -> U-Boot proper

This certainly fix the second channel data training initialization
since we have dynamic rank, stride where second channel capabilities
are clear or memset to 0.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20 23:59:44 +08:00
Jagan Teki
a153b034df rockchip: dts: rk3399: rockpro64: Use LPDDR4-100 dtsi
Use LPDDR4-100 sdram timings dtsi for Rockpro64 board.

All these timings are processed during TPL stage of rockpro64 board,
bootchain. This make TPL would replace rockchip in house rkbin in
current bootchain.

Bootchain after and before this change:

   TPL -> SPL -> U-Boot proper

 rkbin -> SPL -> U-Boot proper

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21 00:00:44 +08:00
Jagan Teki
f797651f80 rockchip: dts: rk3399: Add LPDDR4-100 timings
Add sdram timings for LPDDR4-100 via rk3399-sdram-lpddr4-100.dtsi file.
all timings are dumped from rkbin/bin/rk33/rk3399_ddr_800MHz_v1.20.bin

Associated LPDDR4 board -u-boot.dtsi can include this to make these
timings available during SPL or TPL stages.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: YouMin Chen <cym@rock-chips.com>
Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21 00:00:41 +08:00
Jagan Teki
ab0ce36a16 rockchip: dts: rk3399: Add u-boot, dm-pre-reloc for pmu
Add u-boot,dm-pre-reloc property for pmu in rk3399-u-boot.dtsi
so-that SPL can access pmu.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: YouMin Chen <cym@rock-chips.com>
Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21 00:00:20 +08:00
Ludwig Zenz
b10eaaf0b0 ARM: dts: imx: dh-imx6: Add DHCOM iMX6 Duallite PDK2 device tree
This device tree adds support for DHCOM iMX6 duallite and solo
deriviates.

Signed-off-by: Ludwig Zenz <lzenz@dh-electronics.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-19 20:32:24 +02:00
Ludwig Zenz
b9408d97f4 ARM: dts: dh-imx6: Refactor DT with som and board level defs for use with imx6 duallite
To use the device tree definitions imx6q-dhcom-som.dtsi for all imx6 derivatives rename
it to imx6qdl-dhcom.dtsi. We omit the '-som', because it simplifies further mainlinening
of already existing device trees.
To reuse board level common stuff imx6qdl-dhcom-pdk2.dtsi is created and included by
imx6q-dhcom-pdk2.dts.

Signed-off-by Ludwig Zenz <lzenz@dh-electronics.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-19 20:32:24 +02:00
Anatolij Gustschin
4e36425115 arm: dts: imx: fsl-imx8dx.dtsi: add gpio aliases to fix gpio command
The gpio command currently uses equal bank names "GPIO0_"
for all existing gpio banks, i. e.:

U-Boot# gpio status -a
Bank GPIO0_:
GPIO0_0: input: 0 [ ]
GPIO0_1: output: 1 [x] dbg1.gpios
...

Bank GPIO0_:
GPIO0_0: input: 0 [ ]
GPIO0_1: input: 0 [ ]
...

So the command is broken, it is not possible to address
a desired bank. Add gpio aliases to fix this.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-07-19 20:14:50 +02:00
Joris Offouga
e4258ddd59 pico-imx7d: Enable DM_USB
This patch enable usb support with device-tree

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Reviewed-by: Jun Nie <jun.nie@linaro.org>
2019-07-19 20:14:50 +02:00
Marek Vasut
9ac5dda519 ARM: imx: m53menlo: Convert WDT support to DM
Enable DM Watchdog support on iMX53 M53Menlo.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-07-19 20:14:50 +02:00
Lukasz Majewski
bf99b63c59 DTS: Add imx6q-display5-u-boot.dtsi file with u-boot specific properties
This file setups UART5 based serial to be used as pre-relocation
console in the U-Boot proper.

On purpose pinux configuration is omitted here as it has been already
done in SPL. For early pre-relocation code we only need the serial
device from DTS.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-07-19 20:14:50 +02:00
Lukasz Majewski
7736a6e85f DTS: imx: Add display5 board (imx6q based) device tree description (v5.1)
This commit ports from Linux kernel - tag: v5.1 - the device tree
description for display5 board.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-07-19 20:14:50 +02:00
Peng Fan
d70c0fce67 imx: imx8dx/qxp: enable thermal
Add thermal dts node
Enable thermal in defconfig

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-19 15:17:13 +02:00
Lukasz Majewski
a9cb05080a ARM: dts: imx: Provide 'gpio-ranges' for mxs_gpio driver
Those properties are U-Boot specific as the mxs gpio Linux driver (up to
version v5.1.11) is not supporting them.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-07-19 14:57:14 +02:00
Lukasz Majewski
a823659310 ARM: dts: imx: Copy imx28 device tree related files from Linux kernel (v5.1.11)
This patch copies from the Linux kernel stable (tag v5.1.11)
SHA1: 17bb763e7eaf i.MX28 related device tree files.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
2019-07-19 14:57:14 +02:00
Andy Yan
214c65aa01 rockchip: dts: rk3399: Add 'same-as-spl' for Rock PI 4
Let the board continue boot from the storage device where
it bootup.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-19 11:11:09 +08:00
Andy Yan
9317297957 rockchip: dts: rk3399: Add spl-boot-order for Rock PI 4
RK3399 use sdhci for eMMC and DW MMC for SD Card, and
spl will only try to boot from SDMMC if we don't specify
other boot device for spl-boot-order. So add sdhci and sdmmc
for spl-boot-order here.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-19 11:11:09 +08:00
Peter Robinson
9403f80d68 arm64: rockchip: rock960: sync dts files from Linux 5.2-rc6
Sync the dts files for the Rock960 boards from Linux to get the
latest changes and fixes for the devices.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-07-19 11:11:09 +08:00
Tom Rini
0de8153564 Merge branch '2019-07-17-master-imports'
- Various FS/disk related fixes with security implications.
- Proper fix for the pci_ep test.
- Assorted bugfixes
- Some MediaTek updates.
- 'env erase' support.
2019-07-18 11:31:37 -04:00
Weijie Gao
5490d6ad3b arm: dts: MediaTek: remove tick-timer from mt7629.dtsi
This patch removes tick-timer as all mt7629 boards should use arch timer.

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-07-18 11:31:31 -04:00
Weijie Gao
58067b0de1 arm: dts: MediaTek: fix clock order for timer0 node of mt7629.dtsi
The timer0 node has its two clocks written in reversed order. The timer0
is used as the tick timer which causes a problem that the time a delay
function used is 4 times longer.

This patch reverses these two clocks to solve this issue.

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-07-18 11:31:30 -04:00
Andreas Dannenberg
ba7907c79c arm64: dts: k3-am654-base-board: Add I2C GPIO expander @ 0x38
The AM654 base board has a TCA9554/PCA9554-type GPIO expander on the
wkup_i2c0 bus at address 0x38 that is used to detect the presence of
daughter cards.  Add a respective DTS description of this expander
to enable its use.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-17 11:13:18 -04:00
Andreas Dannenberg
7e0363b285 arm: dts: k3-am654-base-board: Enable wkup_i2c0 across all boot stages
To enable the use of an EEPROM-based board detection scheme we need to
be able to access the I2C bus associated with the EEPROMs across all
3 stages of U-Boot: R5 SPL, A53 SPL, and A53 U-Boot (proper). So go
ahead and add/update the wkup_i2c0 peripheral module DTS definitions
and its associated pinmux node accordingly.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-17 11:13:18 -04:00
Andreas Dannenberg
bbe59169ee arm: dts: k3-am65: Add I2C nodes
Add I2C DT nodes

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-17 11:12:54 -04:00
Andreas Dannenberg
9bbdfdf209 arm: dts: k3-am65: Move pinctrl nodes out of U-Boot specific dtsi
Only U-Boot specifc DT properties or overrides, must be in -u-boot.dtsi.
Pinctrl nodes does not belong here. Now that pinctrl nodes are in kernel
DT, there is no reason to be keep these in -u-boot.dtsi. Move them to
proper places so that it would ease copying DT entries from kernel DT.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-17 11:12:54 -04:00
Faiz Abbas
bbcfaad59f arm: dts: k3: Add phy specific properties to SD card node
With changes in the driver requiring phy related properties,
add the same for the SD card node to prevent breaking boot with
the driver update.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-07-17 11:12:08 -04:00
Faiz Abbas
3a1a0dfc39 arm64: dts: k3: Sync sdhci0 node from kernel and change driver name
Sync the sdhci0 node from kernel. This changes the compatible that is
required to be there in the driver. Change the same for the SD card node
which is not yet supported in kernel. This also syncs the main_pmx0 node
as a side effect.

Also change the name of the driver to match the compatible in kernel.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-07-17 11:12:08 -04:00
Tom Rini
0e80dda32c Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxi
- Beelink-x2 STB support (Marcus)
- H6 DDR3, LPDDR3 changes (Andre, Jernej)
- H6 pin controller, USB PHY (Andre)
2019-07-16 11:19:31 -04:00
Grygorii Strashko
6f2929d8b7 arm64: dts: k3-am654-base-board: add mcu cpsw nuss pinmux and phy defs
Add mcu cpsw nuss pinmux and phy defs required by cpsw.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-15 13:32:26 -05:00
Grygorii Strashko
5195c10fbb arm64: dts: ti: k3-am65: add mcu cpsw node
Add mcu cpsw and its components along with scm_conf node
to have ethernet functional.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-15 13:32:25 -05:00
Marcus Cooper
a9e19b8ff7 sun8i: h3: Add support for the Beelink-x2 STB
The Beelink X2 is an STB based on the Allwinner H3 SoC with a uSD slot,
2 USB ports( 1 * USB-2 Host, 1 USB OTG), a 10/100M ethernet port using the
SoC's integrated PHY, Wifi via an sdio wifi chip, HDMI, an IR receiver, a
dual colour LED and an optical S/PDIF connector.

Linux commit details about the sun8i-h3-beelink-x2.dts sync:
"ARM: dts: sun8i: h3: Add ethernet0 alias to Beelink X2"
(sha1: cc4bddade114b696ab27c1a77cfc7040151306da)

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-15 12:25:32 +05:30
Tom Rini
a9a3a37f92 - syscon: add support for power off
- stm32mp1: add op-tee config
 - stm32mp1: add specific commands: stboard and stm32key
 - add stm32 mailbox driver
 - solve many stm32 warnings when building with W=1
 - update stm32 gpio driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdKK2iAAoJEOKyvdngqpN1TvcH/jj1ujNdRKn994R3DqULzFtc
 Y0WGjAciTUuV0d9gZLxPZJwlWfqxLgbmUEBlPJQJe79gaM7kNN0PgAe6GNedFhGk
 UhRR7GgbA7wogorpRo8aLe3XYEqHtgPFkf1nSiNz/AHLBg8SB20VhWcY90Kha9lh
 IJ0GK+lSdCxiyaLBC2nswnI2PS/fl4NfC7KWvujtKZduIDIOHqh5q+39llpejyuw
 WOzL/bEa4ald6JKpxOii2KXNwD1gUDQGmPzADYcIdwzJtx9hft7DBSLC5Nr+ndBz
 72TjpbtfJ/qIurv8HeXYs9mtwnCO3WP+015fog0T0zjZ48BrT1A8C96ezwLOfz0=
 =W3ny
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20190712' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm

- syscon: add support for power off
- stm32mp1: add op-tee config
- stm32mp1: add specific commands: stboard and stm32key
- add stm32 mailbox driver
- solve many stm32 warnings when building with W=1
- update stm32 gpio driver
2019-07-14 09:09:49 -04:00
Adam Ford
550eebcfb4 ARM: dts: logicpd som-lvs and torpedos: Shrink SPL DTB
Since we have limited resources in SPL, it is the best interest
to keep the SPL as small as possible and that includes the DTB.
There are a few items in the device tree that can be removed,
because these boards don't use them.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-13 11:11:31 -04:00
Adam Ford
42f1539727 ARM: dts: logicpd-som-lv: Resync with Kernel 5.1.9
The MMC card-detect pin was incorrectly defined which was fixed.
This patch resync's the dts and removes the u-boot specific fix.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-13 11:11:30 -04:00
Adam Ford
4972a2a83f ARM: dts: da850: Resync with Linux 5.1.9
The da850.dtsi file had some changes.  This patch pulls in the
changes from Kernel 5.1.9

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-13 11:11:30 -04:00
Niel Fourie
6e171b661e ARM: am335x: Add phyCORE AM335x R2 support
Support for Phytech phyCORE AM335x R2 SOM (PCL060) on the Phytec
phyBOARD-Wega AM335x.

CPU  : AM335X-GP rev 2.1
Model: Phytec AM335x phyBOARD-WEGA
DRAM:  256 MiB
NAND:  256 MiB
MMC:   OMAP SD/MMC: 0
eth0: ethernet@4a100000

Working:
 - Eth0
 - i2C
 - MMC/SD
 - NAND
 - UART
 - USB (host)

Device trees were taken from Linux mainline:
commit 37624b58542f ("Linux 5.1-rc7")

Signed-off-by: Niel Fourie <lusus@denx.de>
Signed-off-by: Parthiban Nallathambi <pn@denx.de>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Marek Vasut <marex@denx.de>
2019-07-13 11:11:28 -04:00
David Lechner
1d259e4d68 ARM: legoev3: convert to driver model
This converts LEGO MINDSTORMS EV3 to the driver model. MMC, SERIAL, SPI
and SPI_FLASH are converted.

The device tree contains only the minimal nodes required by U-Boot
since the size of U-Boot is limited to 256K on this device.

Signed-off-by: David Lechner <david@lechnology.com>
2019-07-13 11:11:28 -04:00
Derald D. Woods
5579e73c8c ARM: dts: omap3-evm: Sync dts(i) files from Linux 5.1.5
Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
2019-07-13 11:11:27 -04:00
Patrice Chotard
6084e96b99 ARM: dts: stm32: Remove useless "st, stm32-gpio" compatible string
Since pinctrl_stm32 driver update, each gpio bank is now binded
by pinctrl driver. The compatible string "st,stm32-gpio" becomes
useless, remove it.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12 11:50:58 +02:00
Patrick Delaunay
35a54d41d9 ARM: dts: stm32mp1: sync device tree with v5.2-rc4
Synchronize device tree with v5.2-rc4 label and
update the associated u-boot dtsi.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Tested-by: Pierre-Jean Texier <pjtexier@koncepto.io>
2019-07-12 11:18:53 +02:00
Patrick Delaunay
dfda7d4c83 stm32mp1: syscon: remove stgen
Reduce difference with kernel Linux device tree.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12 11:18:53 +02:00
Fabien Dessenne
1958dae4f3 ARM: dts: stm32: Add ipcc mailbox support on stm32mp1
Add IPCC mailbox support on stm32mp157 eval and disco boards.

Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-07-12 11:18:53 +02:00
Tom Rini
68deea2308 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell
- SPL SATA enhancements to allow booting from RAW SATA device
  needed for Clearfog (Baruch)
- Enable SATA booting on Clearfog (Baruch)
- Misc changes to Turris Omnia (Marek)
- Enable CMD_BOOTZ and increase SYS_BOOTM_LEN on crs305-1g-4s
  (Luka)
- Enable FIT support for db-xc3-24g4xg (Chris)
- Enable DM_SPI on Keymile Kirkwood board with necessary changes
  for this (Pascal)
- Set 38x and 39x AVS on lower frequency (Baruch)
2019-07-11 18:09:38 -04:00
Pascal Linder
c85306345a km/spi: add SPI configuration to KM Kirkwood device tree
In order to migrate the SPI flash interface to the driver model, the SPI
configuration needs to be added in the KM Kirkwood device tree file.

Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch>
Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-07-11 10:58:03 +02:00
Baruch Siach
22c47f6bbe arm: mvebu: clearfog: enable SATA in SPL
Enable SATA peripherals in SPL to allow boot from SATA.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-07-11 10:58:02 +02:00
Masahiro Yamada
47eb8add27 arm64: dts: uniphier: add reserved-memory for secure memory
[ Linux commit aa38571246c6ac279ebebd141157297bcb959d76 ]

The memory regions specified by /memreserve/ are passed to
early_init_dt_reserve_memory_arch() with nomap=false, so it is
not suitable for reserving memory for Trusted Firmware-A etc.

Use the more robust /reserved-memory node with the no-map property
to prevent the kernel from mapping it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-10 22:41:50 +09:00
Cyrille Pitchen
4eeedd0306 ARM: dts: at91: sama5d2_xplained: fix QSPI0 node
Fix the following:
- use "jedec,spi-nor" binding, we use jedec compatible flashes
- set bus width to 4, we use quad capable flashes
- differentiate bewteen data and clk and cs pins
- drop partions as we don't use them in u-boot.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@microchip.com>
[tudor.ambarus@microchip.com: use "jedec,spi-nor", edit commit message]
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-07-09 09:26:43 +03:00
Tom Rini
54869e0811 - fix complation error for CONFIG_USB
- update RPi3 DTBs to v5.1-rc6 state
 - add defconfig for RPi3 B+
 - Fix BCM2835_MBOX_TAG_TEST_PIXEL_ORDER define
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEiUuSfQSYnG8EMsBltDliWyzx00MFAl0A9VQSHG1icnVnZ2Vy
 QHN1c2UuY29tAAoJELQ5Ylss8dNDyY8P/AsPYLpXkARV1UPaEr9m89uCnrXa0Ggm
 PBFiNUUmM/xRB6J9IQe1YnMio+azVvcpc1AkOTLG7ypgFxAiukfzDS1mnaQye8Mg
 Exq3GgrDZrLp1jXYXSf3EZgIbJhpejHf433frNoJkveq6GTPJpI0mpMsaDVkzy/Q
 jVKm4bLolyXkERIUcOvvhyTwyUJhJv7n6n3+yBMgfssZexhSCzf9nXI7Ds98mxaN
 UNrF6oqvKeICJpvGpfJ+sO4lzaWk/Uc5TEzJ9QnUn0bEePLjJY35H1C5Wmhfo4/L
 KHPGwFTVNvi2byXmht6UK+OWdp1D7NWF+il2dhJUm3kaURkYBVdKAmFd9SpevRX6
 SCsM5spkLeciVIc4keTgZI7yRcvkIq7qul9eCTQnviO/I3h1YykHMgWZjNDkY8ZG
 HhKSKRjpdT+BHq4mWca1Q29cpWwshgC01Vq8Pig/4EOoOSWJ79Y+Qm+xeOwDf2ph
 fRKP40Ves+ER/z+2tAAmj/wuKqD1B8UTIZ4i69lAUei5aSvTwpf1saEV3gIjoaqj
 5fhoCKamsQhXnv0DjYMliXHYZ78EZzZyh6Fr9LHFnlc861IrRawqTPjRuerdjGwd
 jrp/vhwv5regzfDmWGSVo1CCscWvXgf3Tfag2Uwc+u5lXOSgJd8XPZJFiRMGFBon
 fJN1lxjxLRQf
 =0ulJ
 -----END PGP SIGNATURE-----

Merge tag 'rpi-next-2019.07' of https://github.com/mbgg/u-boot

- fix complation error for CONFIG_USB
- update RPi3 DTBs to v5.1-rc6 state
- add defconfig for RPi3 B+
- Fix BCM2835_MBOX_TAG_TEST_PIXEL_ORDER define
2019-07-05 18:19:47 -04:00
Fabio Estevam
5b85858251 wandboard: Add FIT image support
After the transition to DM, only the mx6dl/solo wandboard
is supported.

Add FIT image support so that all the wandboard variants
can be supported, like it was prior to the DM conversion.

Successfully booted Linux on mx6q/solo/qp wandboards.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-07-04 14:19:49 +02:00
Fabio Estevam
df51656986 wandboard: Add mmc0 alias
Add a mmc0 alias so that U-Boot proper can associate mmc0
with the boot SD card.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-07-04 14:19:49 +02:00
Fabio Estevam
6b573ed0bc wandboard: Import extra wandboard devicetree files
Import wandboard devicetree files so that the mx6q and mx6qp
variants can be properly supported.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-07-04 14:19:48 +02:00
Fabio Estevam
b76ba47cce wandboard: Sync with devicetree files from kernel 5.1.9
Udate the wandboard devicetree files with the ones
from kernel 5.1.9.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-07-04 14:19:48 +02:00
Fabio Estevam
ba18fdb312 mx6: dts: Move dtbs under SoC level
Place dtbs under SoC level rather than board level.

imx6q-novena.dtb and imx6dl-wandboard-revb1.dtb were
placed under the board config option, so move them
to SoC level.

This also aligns with the kernel dts Makefile format.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-07-04 14:19:48 +02:00
Fabio Estevam
7e8c2190c7 mx6: dts: Keep dtb entries sorted
Keep dtb entries sorted to help adding new dtbs
in an organized form.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-07-04 14:19:48 +02:00
Kever Yang
e3f9a93e5a rockchip: dts: rk3288-tinker: enable sdmmc pinctrl node in spl
rockchip pinctrl driver has update to use dts, so we need
to add the pinctrl config in SPL for sdmmc.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-02 11:49:49 +08:00
Kever Yang
7e7f79207d rockchip: dts: tinker: migrate the dm-pre-reloc tag into -u-boot dts
Migrate all the "u-boot,dm-pre-reloc" tag from rk3288-tinker.dts
into rk3288-tinker-u-boot.dtsi.
When both board level and soc level '-u-boot.dtsi' files exist,
we need to include the soc level 'rk3288-u-boot.dtsi' manually.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-02 11:49:49 +08:00
Kever Yang
590dc42620 rockchip: dts: rk3288: move reloc tag into -u-boot dts
Move all the tag "u-boot,dm-pre-reloc" from rk3288.dtsi
into rk3288-u-boot.dtsi.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-02 11:49:49 +08:00
Mark Kettenis
5a6d960b22 rockchip: dts: rk3399: rockpro64: Provide init voltage
Add missing regulator-init-microvolt property to vdd_log regulator.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
(Rebase on latest u-boot-rockchip master)
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>

Change-Id: I13b24fb81e8ad269d7dbb0c7b67f5f4795d2e775
2019-07-02 10:49:17 +08:00
Tom Rini
0352e878d2 Fixes for 2019.07
- menlo board
 - allow SDB on Sabre
 - HAB for mx6sl
 - apalis board
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl0VwBcPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3k4AL/iaMEhY5e43krMSmlnWDfS2DsTVpyUBX1Q7X
 JHkuKQ8iH3bBSquwLNFju2hGNK8whCHfsIB5QgSh4uK3JIzWAh+/5TCGXbPDkGMJ
 PI/hyxKy2EB245SMshcJMHbyLK6PeHi4V/WA4WyY2c91Dz/DNx7UhMZOlFm8wyMl
 TwDCwtlqHodz0tXKUziCjSqTfxj7WSThwuyQ0SEHAccglM1MzM1JHq1RcdV7Pjdh
 bDpMC0rjcxYl5MM7gIig5OMtx+26HgP6JM+QfeoEuBm0PbhxV6ZFyHlafb8W/ba0
 SjzMWIknZWYA9GTAkdUgN+E0ChZVID0oSVoVh51eKiOG1z+LpkJEKE7xsaCAeBiQ
 BupLRgd0tBtqVK345EFDCy5UkYrnkLOnI+3JQNZ9bxBoPmKAf6wvhqa9Jf3bc+rP
 iSYh9Lm3sWVlXKcLR4ltS39D48OT8GZqun8zLpZkwpAWxRMuFvR+R7Q+VMVKmEF2
 1dn3EJhMsvbmTj0lYRp+ObEEpJDL9A==
 =DFoX
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20190628' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

Fixes for 2019.07

- menlo board
- allow SDB on Sabre
- HAB for mx6sl
- apalis board
2019-06-28 08:00:22 -04:00
Tom Rini
cb8cc1d8fb STM32 MCU fixes/cleanup:
_ Fix SPL console for STM32F769 Discovery
 _ Fix Memory Protection Unit size for STM32F4 series
 _ Cleanup DT for STM32F746 Discovery
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCgA1FiEEXyrViUccKBz9c35Jysd4L3sz/6YFAl0VyiEXHHBhdHJpY2Uu
 Y2hvdGFyZEBzdC5jb20ACgkQysd4L3sz/6YHxw//e+N2aQrdtioDGqHupwycdDWy
 323WMLCnbX6aGgHXMKCRT2X0I+gwQ1Me4Hc4LvwwbsiNoEfwvqR7mo0zE1uHs9kI
 aq+PPsxSyxvFDuT33WhtJqkXPKylMZpLt7HPeA2yuxuQKfLb1G/IqptPCJTbKNBp
 TywIUqYi/d59qkKVC6ohYFB+EigbNNy5Qm2EIxYgfUIsfHURycCX3czSHUyVU4Hn
 GkaBueTEgc1zCXq+yTEYe/0+ESlBpyZQmvf4midx6+knRw6IFy21QsReqNWMWV9H
 Tw6x5m+GpFru1N3kbldz+cfzRLTDjMDGTxT9Dv3JNvA3pu8Mo61esa7vwZnE3njD
 8BGSjwesSFL0i6KEvWc3Ir6U7F5P0wnI+FZ352ixGbleRiOCH6Gn8dpXY9xdPMFt
 m4XME44iXZZDtV9jqCdTNNBUOrp6ieQGOxvOhJAQDYgl0Cf+f2vYVAq7Q+wG8A99
 RdiZ8oLEn0e99aoKwUEj0VaNVMciSeInNif8TZlL2zduDO7gWtFeGIx3dDgzDYls
 0IyQdbUgwCBuZXc/zShaJKcbmdC2K/G/s6+bYyLk940ncLJPwyrNIGA7CK70vMr/
 MS4THwlVmpWm4SpiKXqyIJTPzKylYVXTxtnOvUc5lelkqKdARtYrBvxwnDXLtc2o
 DHJC1RtqlW7L9oEcci0=
 =5mJg
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20190628' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm

STM32 MCU fixes/cleanup:
- Fix SPL console for STM32F769 Discovery
- Fix Memory Protection Unit size for STM32F4 series
- Cleanup DT for STM32F746 Discovery
2019-06-28 07:59:38 -04:00
Patrice Chotard
1d3d87b41a ARM: dts: stm32: Remove useless u-boot, dm-pre-reloc in stm32f746-disco-u-boot.dtsi
As in stm32f7-u-boot.dtsi these nodes already have "u-bootdm-pre-reloc"
property, no need to add them again in stm32f746-disco-u-boot.dtsi.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-06-28 09:45:07 +02:00
Patrice Chotard
b8e8fdff29 ARM: dts: stm32: Add u-boot, dm-pre-reloc for usart1_pins_a for stm32f769-disco
This allow to get console output in SPL for stm32f769-disco.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-06-28 09:45:07 +02:00
Marek Vasut
26bb95f056 ARM: dts: imx: m53menlo: Import M53Menlo DT from Linux
Import iMX53 M53Menlo device tree from Linux next-20190607 3f310e51ceb1 .
Enable DT control in full U-Boot . Add U-Boot extras into separate DTSi,
the GPIO controllers need to be inited early, otherwise m53_set_clock()
won't be able to detect the correct CPU clock frequency by reading the
GPIO.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-06-27 14:14:23 +02:00
Marek Vasut
1d255904c3 ARM: dts: imx: imx53: Synchronize iMX53 DT with Linux
Synchronize iMX53 device tree from Linux next-20190607 3f310e51ceb1 ,
this is needed to get NFC, UART, USBOTG DT nodes.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-06-27 14:14:12 +02:00
Jagan Teki
16b0dd4cd1 rockchip: rk3399: Move u-boot, dm-pre-reloc of uart0, uart2
u-boot,dm-pre-reloc for uart0, uart2 indeed u-boot specific
properties. Move them into rk3399-u-boot.dtsi so the boards
which enabled these node will available during SPL.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26 21:11:28 +08:00
Matwey V. Kornilov
348a0b7f9e rockchip: dts: rk3328: add rk3328-rock64.dts
rk3328-rock64.dts has been taken from Linux kernel commit

    cff6d1d6f88b ("arm64: dts: rockchip: enable HS200 for eMMC on rock64")

with minor modifications (drop nodes not known by rk3328.dtsi).

Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26 21:11:26 +08:00
Tom Rini
e8c185bb15 _ Update STM32MP entry in MAINTAINERS
_ Handle correctly binding for g-tx-fifo-size for USB DWC2 driver
 _ Fix trusted STM32MP1 defconfig with correct ethernet driver
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCgA1FiEEXyrViUccKBz9c35Jysd4L3sz/6YFAl0KUq0XHHBhdHJpY2Uu
 Y2hvdGFyZEBzdC5jb20ACgkQysd4L3sz/6Y6ZA//fidCjjfPkJgV0lQJeWJDzaoF
 VOtqpSLj9of5SxCfeXV5Ts1ngnSrwRDpGstuER2l7icFq24XnrtaBBGhlGVZ0wvJ
 ft5VDZZo0VehoxN1yMlGrZ9vCNx5V8v5VJVLDneZdDSFIAJD5aioIe5S9EOfJz6F
 oe9uYXxArDNbzuw6YC7de7RDmMNl7pR5DDhaPMuWr12+T1FxzEVUNh0ohWhJxqL8
 tmieg0kDyBKWHSgna8G1JhIJfGmdxsj2RR7nazPt+OduqRuFE24VuEFRvsjEjhmI
 AiUhb4UpGOtXHtP6g4o2q78t77Quu0SqI6RJJEOcsAF7jGnwrcjjQe6W4JDVy5f5
 zh+SObj2frgaMc0s0hM6/StlZQJp6N09FFjn8G+T9RupL/lKeqH+xnJT5asZJdso
 mLyBbxhQhaGBP2QyUNB02t9aiQeOYJ1jCJCC+/iORQ6jPK+qNboTdPmTGfpbR14v
 /IgVbIsOWE6eKu5u/ac2TXZBkEPOLX6wCh6C0qTGLEEp9dh1Y63/bETy/ZpBqu55
 YTLXVVRK2l9cRXZI8CAyBRBNk6VrdAQq+e48A0dvVWvAMDFalr/54JustzEh5VKs
 oNe+oGRTZt/S3MYCnMjvhcaPZOqAxt+V7MQ8yuubn1TSV29ygcilzHySK0IaT2Cj
 WXD/pNKx+h8cu46i+nE=
 =wz3G
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20190619' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm

- Update STM32MP entry in MAINTAINERS
- Handle correctly binding for g-tx-fifo-size for USB DWC2 driver
- Fix trusted STM32MP1 defconfig with correct ethernet driver
2019-06-20 09:14:03 -04:00
Patrick Delaunay
de6e4a6f5c ARM: dts: stm32mp1: remove override for g-tx-fifo-size
Remove the override for usbotg_hs on g-tx-fifo-size as the correct
binding, used in the kernel device tree, is now supported in dwc2
device driver.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-06-19 16:56:11 +02:00
Vabhav Sharma
d90c7ac7a9 armv8: ls1046afrwy: Add support for LS1046AFRWY platform
LS1046AFRWY board supports LS1046A family SoCs. This patch
add base support for this board.
Board support's 4GB ddr memory, i2c, micro-click module,microSD card,
serial console,qspi nor flash,ifc nand flash,qsgmii network interface,
usb 3.0 and serdes interface to support two x1gen3 pcie interface.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:57 +05:30
Alex Marginean
062d8148f8 arm: ls1028a: define the integrated PCI bus (ECAM)
LS1028A includes an integrated PCI bus with 11 PCI functions residing on
bus 0.  ECAM plus the device register space takes up 256MB of address
space.

Signed-off-by: Alex Marginean <alexm.osslist@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:57 +05:30
Peng Ma
f68ce9e9ac ARM: dts: ls1021a: Fixed reg for sata node
This patch is to fixed the reg read to "0" for armv7
architecture.

Signed-off-by: Peng Ma <peng.ma@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:57 +05:30
Yinbo Zhu
85e5e21981 armv8: lx2160aqds: Enable eSDHC controllers
This patch is to enable esdhc controllers for lx2160aqds

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:57 +05:30
Peng Ma
91f54e7c61 armv8: ls1028a: Add ecc address node for sata.
Move the ecc addr from driver to dts

Signed-off-by: Peng Ma <peng.ma@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:56 +05:30
Peng Ma
d17eb57dcf armv8: lx2160aqds: Enable sata
Change sata node status to enable sata.

Signed-off-by: Peng Ma <peng.ma@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-06-19 12:54:56 +05:30
Ley Foon Tan
b861cfb53c arm: dts: Stratix10: Enable i2c
Enable i2c1 in Stratix 10 devkit.

SOCFPGA_STRATIX10 # i2c bus
Bus 0:  i2c@ffc02900
SOCFPGA_STRATIX10 # i2c dev 0
Setting bus to 0
SOCFPGA_STRATIX10 # i2c probe
Valid chip addresses: 14 4C 51 68 74

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-06-14 12:41:26 +02:00
Heinrich Schuchardt
143256b353 fdt: update bcm283x device tree sources to Linux 5.1-rc6 state
Updating the bcm283x device tree sources adds the device trees for

- Raspberry Pi 3 Model A+
- Raspberry Pi 3 Model B+
- Raspberry Pi Compute Module IO board rev1
- Raspberry Pi Compute Module 3 IO board V3.0
- Raspberry Pi Zero

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2019-06-12 12:23:46 +02:00
Tom Rini
2702646bc0 - Add Ethernet support for STM32MP1
- Add saveenv support for STM32MP1
 - Add STM32MP1 Avenger96 board support
 - Add SPI driver suport for STM32MP1
 - Add watchdog support for STM32MP1
 - Update power supply check via USB TYPE-C for STM32MP1 discovery board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJc+TqsAAoJEMrHeC97M/+miKwP/3OouX3slblEfUELRj/9qLlU
 ypdUDKDQupGSrTIyhJHFdGbA2ct/ERl4mH/kU8NNeCHVCsdvrrmuw+k4jfVZfIyi
 d9gWmU5WanNPzdWwdo0NrVNXjN5LPduxeUCYHdDEggDJuG3YL4LA9pPyrWpL8o8t
 tLPr8YMB1u5Ab8Vn/1A9lKvmw98V59LmWVxZh0AtAdOTvWgEZQe1R5Vex+MHacnK
 uR/Dm3ry5v7ZlR/kMZ0C+Ip1aw9GU4e+O+LCGlU4Jr0GV2XQOr4ehxWtN02nYubc
 sYXbkW7UArR0I0g8YPXPoBI9PToi57bHW/TXKoI8yDIll7vZ9PDjT/FbUJM9rv72
 WU6T7+K2DeHflmp4NljiesD2rDnti0XSCbe4o5o/jD+YkzH6YoJbco4nsae7TBSM
 R3rgV7/+St7zC1IjFq0TUG+S9qSUmZqA4k66+j5/SS6pLQOW3dYemL0/up2cRX5w
 dx00JTQkHyh7Q/GfH8r7yZqIToW9djB9HeT88ovPUCh8rVfDqNn8/WKd2JAfkxda
 QiZDs49BMBsnWpK+vPqiq/suoJeSwDB70iMzrGgBg+mTd9eJcD0c5QBURYE0jm2H
 GqQ04WNi8sLzULhMqKbBdPZhBMzyNmDXF6MC+y/OcUM5k8z6tY8LDro3wgHXWVpX
 DLiFVbkHbLhlUJbeO8dD
 =2C9f
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20190606' of https://github.com/pchotard/u-boot

- Add Ethernet support for STM32MP1
- Add saveenv support for STM32MP1
- Add STM32MP1 Avenger96 board support
- Add SPI driver suport for STM32MP1
- Add watchdog support for STM32MP1
- Update power supply check via USB TYPE-C for STM32MP1 discovery board
2019-06-11 17:22:22 -04:00
Tom Rini
529faf80c3 u-boot-imx-20190612
--------------------
 
 - Board fixes:
 	- imx6logic
 	- wandboard
 	- mx6sabre boots again
 	- imx8qm_mek
 	- pico-* boards
 	- Toradex apalis / colibri
 	- engicam imx6 (environment)
 	- KP MX53
 	- opos6ul
 - Switch to DM:
 	- vining2000
 	- dh MX6
 	- Toradex colibri i.MX7
 	- Novena
 - Security : fix CSF size for HAB
 - Other:
       - imx: fix building for i.mx8 without spl
       - pcie and switch to DM
 
       mx6sabreauto: Enable SPL SDP support
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAlz/bLMPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3W7oL/1rYXpSr2JE8fdXvqtmugjaPr7lQFzE7Bjkw
 pDyDZA+3tpG8lv5xwjUi0Q+c38RRY6K/1lP/bztGXal+ryx/V0HFNAKKdhzedxhy
 kgB3BGyp0rdEpzRwBLEkUCVFKJyVMI9ztPpzun6FDm+pyvIN4vnvziYPlkrYSyVk
 ZrvCGk6X8OYAJ3qNcTcttPIXTfv0QTs8l6bpw3kHSVoUSAGGQc2FxOUmxvwsZedN
 jpVJ5iB/2xrmSyWMIcGAfXLhzNolooeFgcqdKj7X+x0l0Q1p/S4srGKfYRqqhsAO
 q4H/Xjt47e6oWVclbh3TypnUuxAw0i2BhhczAbr/nnN42aNySWrtQyZm33h/esAy
 dcriYUvHlsoC00sfB1xShF4rhBno8OW+ExJVDwsVMalJr9WI4FujwsE/Aw+CUec8
 ompz1IUz+2+BG+PcVbDNxysM5TcqpdQOaq0JKQUnz/xzyocV75M2pFw9YzQE85J7
 yHAoq5OlW//B1wSRuPlH3vBkVWf2SA==
 =pRXQ
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20190612' of git://git.denx.de/u-boot-imx

u-boot-imx-20190612
--------------------

- Board fixes:
	- imx6logic
	- wandboard
	- mx6sabre boots again
	- imx8qm_mek
	- pico-* boards
	- Toradex apalis / colibri
	- engicam imx6 (environment)
	- KP MX53
	- opos6ul
- Switch to DM:
	- vining2000
	- dh MX6
	- Toradex colibri i.MX7
	- Novena
- Security : fix CSF size for HAB
- Other:
      - imx: fix building for i.mx8 without spl
      - pcie and switch to DM

      mx6sabreauto: Enable SPL SDP support
2019-06-11 13:41:24 -04:00
Sjoerd Simons
bf219a3602 arm: dts: imx6qdl-u-boot: Alias usb0 to usbotg
All i.mx6 boards seems to have moved to DM_USB, however gadget support
for mx6 is still pre-DM as CI_UDC isn't converted yet. To make this work
the usb otg controller used for gadgets needs to be usb number 0.
Add an alias for this directly in the main u-boot mx6qdl dtsi so it
doesn't need to be done for each board separately.

This fixes regressions wrt. usb gadget functionality in several boards
that have gadget functions enabled in their config, but no usb0 alias in
their device-tree.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
2019-06-11 10:43:00 +02:00
Marek Vasut
ac2b71f60b ARM: imx: vining2000: Convert MMC and block to DM
Enable DM block and DM MMC support on iMX6SX VINING|2000 .
Convert board code to match the DM support. This disables
USB mass storage support due to missing DM USB, however
that will be re-enabled in subsequent patch.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Silvio Fricke <silvio.fricke@softing.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-06-11 10:42:48 +02:00
Marek Vasut
6245170b67 ARM: dts: imx: vining2000: Import VINING|2000 DT from Linux
Import iMX6SX VINING|2000 device tree from Linux 5.1.1 b724e9356404 .
Enable DT control in full U-Boot .

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Silvio Fricke <silvio.fricke@softing.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-06-11 10:42:48 +02:00
Parthiban Nallathambi
d2d1191843 imx: Extend PCL063 support for phyCORE-i.MX6ULL SOM
Extend PHYTEC phyBOARD-i.MX6UL for phyCORE-i.MX6UL SoM (PCL063)
with eMMC on SoM.

CPU:   Freescale i.MX6ULL rev1.0 792 MHz (running at 396 MHz)
CPU:   Industrial temperature grade (-40C to 105C) at 38C
Reset cause: POR
Model: Phytec phyBOARD-i.MX6ULL-Segin SBC
Board: PHYTEC phyCORE-i.MX6ULL
DRAM:  256 MiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
In:    serial@02020000
Out:   serial@02020000
Err:   serial@02020000
Net:   FEC0

Working:
 - Eth0
 - i2C
 - MMC/SD
 - eMMC
 - UART (1 & 5)
 - USB (host & otg)

Signed-off-by: Parthiban Nallathambi <parthitce@gmail.com>
2019-06-11 10:42:48 +02:00
Marcel Ziswiler
3d60366500 board: toradex: add apalis imx8qm 4gb wb it v1.0b module support
This commit adds initial support for the Toradex Apalis iMX8QM 4GB WB IT
V1.0B module. Unlike the V1.0A early access samples exclusively booting
from SD card, they are now strapped to boot from eFuses which are
factory fused to properly boot from their on-module eMMC. U-Boot
supports either booting from the on-module eMMC or may be used for
recovery purpose using the universal update utility (uuu) aka mfgtools
3.0.

Functionality wise the following is known to be working:
- eMMC, 8-bit and 4-bit MMC/SD card slots
- Gigabit Ethernet
- GPIOs
- I2C

Unfortunately, there is no USB functionality for the i.MX 8QM as of yet.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Max Krummenacher <max.krummenacher@toradex.com>
2019-06-11 10:42:48 +02:00
Marcel Ziswiler
38d8955a98 arm: dts: imx8qm: add support for i2c0, i2c1, i2c2, i2c3 and i2c4
Add support for i2c0, i2c1, i2c2, i2c3 and i2c4.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Max Krummenacher <max.krummenacher@toradex.com>
2019-06-11 10:42:48 +02:00
Marcel Ziswiler
bc527c6dfa arm: dts: imx8qm: add lpuart1, lpuart2, lpuart3, lpuart4
Add support for lpuart1, lpuart2, lpuart3 and lpuart4.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Max Krummenacher <max.krummenacher@toradex.com>
2019-06-11 10:42:48 +02:00
Marek Vasut
6b98b94ce2 ARM: imx: novena: Convert block devices to DM
Enable DM block, DM MMC and DM SATA support on iMX6Q Novena
convert board code to match the DM support.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Vagrant Cascadian <vagrant@debian.org>
2019-06-11 10:42:48 +02:00
Marek Vasut
11a3cae71d ARM: dts: imx: novena: Import Novena DT from Linux
Import iMX6Q Novena device tree from Linux 5.1-rc7 37624b58542f .
Enable DT control in full U-Boot .

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Vagrant Cascadian <vagrant@debian.org>
2019-06-11 10:42:48 +02:00
Marek Vasut
f54dc48c5b ARM: dts: imx: dh-imx6: Fix SPI CS polarity on DHCOM iMX6 PDK2
The SPI nCS signal is active low, make it so.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Ludwig Zenz <lzenz@dh-electronics.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-06-11 10:42:48 +02:00
Marek Vasut
5f6d90aade ARM: dts: imx: dh-imx6: Import DHCOM iMX6 PDK2 DTs from Linux
Import DHCOM iMX6 PDK2 device tree from Linux 5.1.1 b724e9356404 .
Enable DT control in full U-Boot .

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Ludwig Zenz <lzenz@dh-electronics.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-06-11 10:42:48 +02:00
Marcel Ziswiler
4721d7d3b4 colibri-imx6ull: fix usb host mode
This fixes an issue with USB host mode.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-06-11 10:42:48 +02:00
Igor Opaniuk
5d2cd9f117 colibri_imx7: migrate usb to driver model
Migrate USB to Driver Model (CONFIG_DM_USB=y).

Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-06-11 10:42:48 +02:00
Marcel Ziswiler
8b98a4916f apalis_imx6: add device tree to makefile
Add device tree to Makefile to avoid newly introduced error:

Device Tree Source is not correctly specified.
Please define 'CONFIG_DEFAULT_DEVICE_TREE'
or build with 'DEVICE_TREE=<device_tree>' argument

make[1]: *** [dts/Makefile:28: arch/arm/dts/imx6-apalis.dtb] Error 1
make: *** [Makefile:1009: dts/dt.dtb] Error 2

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-06-11 10:42:48 +02:00
Parthiban Nallathambi
a443c8212c ARM: dts: i.MX6ULL: U-Boot specific dts for u-boot, dm-spl
u-boot,dm-spl property is specific to U-Boot, so created one
for i.MX6ULL platforms.

Signed-off-by: Parthiban Nallathambi <parthitce@gmail.com>
2019-06-11 10:42:48 +02:00
Marcel Ziswiler
7ce134b7c3 board: toradex: add colibri imx8qxp 2gb wb it v1.0b module support
This commit adds initial support for the Toradex Colibri iMX8QXP 2GB WB
IT V1.0B module. Unlike the V1.0A early access samples exclusively
booting from SD card, they are now strapped to boot from eFuses which
are factory fused to properly boot from their on-module eMMC. U-Boot
supports either booting from the on-module eMMC or may be used for
recovery purpose using the universal update utility (uuu) aka mfgtools
3.0.

Functionality wise the following is known to be working:
- eMMC and MMC/SD card
- Ethernet
- GPIOs
- I2C

Unfortunately, there is no USB functionality for the i.MX 8QXP as of
yet.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-06-11 10:42:48 +02:00
Tom Rini
99e14d5249 - mxsfb DM_VIDEO conversion
- splash fix for DM_VIDEO configurations
 - meson HDMI fix for boards without hdmi-supply regulator
 -----BEGIN PGP SIGNATURE-----
 
 iGwEABECACwWIQSC4hxrSoIUVfFO0kRM6ATMmsalXAUCXP4oqg4cYWd1c3RAZGVu
 eC5kZQAKCRBM6ATMmsalXLDlAJ422AAeTYTWf0wrfWz11YUWggd7HQCfcsY+UjgL
 SM69apyCTV0ZGo5uVzE=
 =bQQc
 -----END PGP SIGNATURE-----

Merge tag 'video-updates-for-2019.07-rc3' of git://git.denx.de/u-boot-video

- mxsfb DM_VIDEO conversion
- splash fix for DM_VIDEO configurations
- meson HDMI fix for boards without hdmi-supply regulator
2019-06-10 09:41:19 -04:00
Tom Rini
5973901826 Merge branch 'master' of git://git.denx.de/u-boot-tegra
The bulk of these changes are an effort to unify Tegra186 builds with
builds of prior 64-bit Tegra generations. On top of that there are
various improvements that allow data (such as the MAC address and boot
arguments) to be passed through from early firmware to the kernel on
boot.
2019-06-08 09:10:31 -04:00
Christophe Roullier
c8ef95376f ARM: dts: stm32: Add Ethernet support on stm32mp1
This patch add Ethernet support on stm32mp157 eval board

Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
2019-06-06 17:40:19 +02:00
Patrice Chotard
75500a4182 ARM: dts: stm32mp: Add iwdg2 support for stm32mp157c
This patch adds independent watchdog support for stm32mp157c
in SPL.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-06-06 17:40:16 +02:00
Patrick Delaunay
c4a739ad50 stm32mp1: activate NAND and NOR support on EV1
Add the necessary configuration to have NAND and NOR support on ev1 board
for BASIC boot (with SPL) or for TRUSTED boot (with TF-A).

STM32MP> nand info

Device 0: nand0, sector size 256 KiB
  Page size       4096 b
  OOB size         224 b
  Erase size    262144 b
  subpagesize     4096 b
  options     0x00184200
  bbt options 0x00060000

STM32MP> sf probe
SF: Detected mx66l51235l with page size 256 Bytes, erase size 64 KiB, total 64 MiB

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-06-06 17:40:12 +02:00
Manivannan Sadhasivam
93ffa2ba80 board: stm32mp1: Add Avenger96 board support
Add support for Avenger96 board from Arrow Electronics based on STM32MP157
MPU. This board is one of the Consumer Edition (CE) boards of the 96Boards
family and has the following features:

SoC: STM32MP157AAC
PMIC: STPMIC1A
RAM: 1024 Mbyte @ 533MHz
Storage: eMMC v4.51: 8 Gbyte
         microSD Socket: UHS-1 v3.01
Ethernet Port: 10/100/1000 Mbit/s, IEEE 802.3 Compliant
Wireless: WiFi 5 GHz & 2.4GHz IEEE 802.11a/b/g/n/ac
          Bluetooth®v4.2 (BR/EDR/BLE)
USB: 2x Type A (USB 2.0) Host and 1x Micro B (USB 2.0) OTG
Display: HDMI: WXGA (1366x768)@ 60 fps, HDMI 1.4
LED: 4x User LED, 1x WiFi LED, 1x BT LED

More information about this board can be found in 96Boards website:
https://www.96boards.org/product/avenger96/

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-06-06 17:40:12 +02:00
Manivannan Sadhasivam
89e4dd57bd arm: dts: stm32mp157: Add missing pinctrl definitions
Add missing pinctrl definitions for STM32MP157.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-06-06 17:40:11 +02:00
Thierry Reding
879a3bc1c2 ARM: tegra: Mark built-in Ethernet as default on Jetson TX2
Add an "ethernet" alias that points to the default network interface,
which is the built-in EQoS on Jetson TX2.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-06-05 09:16:35 -07:00
Thierry Reding
1e669b4808 ARM: tegra: Rename pcie-controller to pcie
Recent versions of DTC have checks for PCI host bridge device tree nodes
that are named something other than "pci" or "pcie". Fix all occurrences
of such nodes for Tegra boards to avoid potential warnings from DTC.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-06-05 09:16:35 -07:00
Adam Ford
e3b7ff2476 ARM: DTS: imx6q-logicpd: Resync with Linux 5.1
Resync imx6q-logicpd with Kernel 5.1.5

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-06-05 12:14:02 -04:00
Igor Opaniuk
a589107d4f ARM: dts: colibri_imx7: Add lcdif node
Extend lcdif DT node with proper display-timings for mxsfb driver.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-06-04 23:29:26 +02:00
Dennis Gilmore
7505075dff arm: mvebu: helios4: add MMC to SPL DT
This allows SPL to load the main U-Boot image from MMC once DM_MMC is
enabled.

Signed-off-by: Dennis Gilmore <dennis@ausil.us>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-06-04 08:33:24 +02:00
Tom Rini
8a802a2eef Merge tag 'rockchip-for-v2019.07-rc3' of git://git.denx.de/u-boot-rockchip
- some fix for rk3399-puma;
- rockchip script make_fit_atf.py cleanup
- Enable TPL for rk3399 orangepi and nanopi4;
- add support for rk3399 boards: Nanopi NEO4, Rockpro64, Rock PI 4;
2019-05-31 07:17:09 -04:00
Neil Armstrong
32f2880641 ARM: dts: Add missing DT for Meson G12A support
The following DT nodes in the process on review for Linux 5.3,
until Linux 5.3 is tagged, add the missing DT nodes in u-boot specific
DTSI files that will be dropped when the v5.3-rc1 DT is synced again.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-05-31 10:04:15 +02:00
Neil Armstrong
b1e81e67ee ARM: dts: sync Amlogic G12A DT with Linux 5.2-rc1
Sync from Linux commit a188339ca5a3 ("Linux 5.2-rc1")

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-05-31 09:57:49 +02:00
Jagan Teki
540c900dec rockchip: rk3399: Add Rock PI 4 support
Add initial support for Rock PI 4 board.

Specification
- Rockchip RK3399
- LPDDR4
- eMMC
- SD card slot
- RTL8211E 1Gbps
- HDMI In/Out, DP, MIPI DSI/CSI
- PCIe M.2
- USB 2.0, USB-3.0
- USB C Type

Commit details of rk3399-rock-pi-4.dts sync from Linux 5.1-rc2:
"arm64: dts: rockchip: add ROCK Pi 4 DTS support"
(sha1: 1b5715c602fda7b812af0e190eddcce2812e5417)

Signed-off-by: Akash Gajjar <akash@openedev.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-30 18:22:35 +08:00
Jagan Teki
001d6745e3 rockchip: rk3399: Add Rockpro64 board support
Add initial support for Rockpro64 board.

Specification
- Rockchip RK3399
- 2/4GB Dual-Channel LPDDR3
- SD card slot
- eMMC socket
- 128Mb SPI Flash
- Gigabit ethernet
- PCIe 4X slot
- WiFI/BT module socket
- HDMI In/Out, DP, MIPI DSI/CSI, eDP
- USB 3.0, 2.0
- USB Type C power and data
- GPIO expansion ports
- DC 12V/2A

Commit details of rk3399-rockpro64.dts sync from Linux 5.1-rc2:
"arm64: dts: rockchip: rockpro64 dts add usb regulator"
(sha1: 6db644c79c8d45d73b56bc389aebd85fc3679beb)

'Akash' has sent an initial patch before, so I keep him as board
maintainer and I'm co-maintainer based on our conversation.

Signed-off-by: Akash Gajjar <akash@openedev.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-30 18:22:35 +08:00
Jagan Teki
48b5c25f99 rockchip: rk3399: Add Nanopi NEO4 board support
Add initial support for Nanopi NEO4 board.

Specification
- Rockchip RK3399
- 1GB DDR3-1866
- SD card slot
- eMMC Socket
- RTL8211E 1Gbps
- AP6212 WiFI/BT
- HDMI In/Out, DP, MIPI CSI
- USB 3.0, 2.0
- USB Type C power and data
- GPIO expansion ports
- DC 5V/3A

Commit details of rk3399-nanopi-neo4.dts sync from Linux:
"arm64: dts: rockchip: Add Nanopi NEO4 initial support"
(sha1: 092470b537f19788d957aed12d835a179b606014)

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-30 18:22:35 +08:00
Tom Rini
696f02d99b Merge branch 'master' of git://git.denx.de/u-boot-socfpga
- SoCFPGA PL310 cleanup + A10 fix, A10 DT cleanup, DW GPIO fix.
2019-05-26 20:15:46 -04:00
Tien Fong Chee
ca9387e8b1 Arm: dts: socfpga: Remove invalid property from chose node
Finding bitstream from cff-file is no longer valid after bitstream is built
into FIT image and loaded by generic firmware loader. Remove cff-file
as this is legacy implementation from A10 downstream.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2019-05-24 14:29:51 +02:00
Patrick Delaunay
067a4c001d ARM: dts: stm32mp1: DDR config v1.44
Update DDR configuration with the latest update:

- PUBL_regs: DXnGCR[0]= according to ddr_width to disable Byte
                        lane 2/3 in 16bit
- fix LPDDR2/3 timing_calc to step RL/WL in relaxed
  timings mode
- remove  LPDDR3 RL3 (optional) support vs  MR0[7]
  because MR0[7] can't be read instead  always apply
  worse RL/WL for LPDDR3 when freq < 166MHz)
- change  MR3 to 48ohm drive  for LPDDR2/3
- change default ZPROG[7:4] = 0x1 for LPDDR2/3 ,
  '0' is not allowed even when ODT not used
- use DQSTRN for LPDDR2/3 (it was not set in PIR)
- LPDDR3: set dqsge/dwsgx gate extension to 2,2
  like LPDDR2
-DDRCTRL.dfitmg0:
  + for LPDDR3 tphy_wrlat = WL (as LPDDR2)
  + improvement for relaxed mode vs  RL/Wl at corner case.
    For example @533MHz RL/WL (relaxed) = 9/5 for LPDDR2/3
    and correction to MR2 accordingly
- DDR_PCFGQOS1_1: port1 timeout relaxed from 0x00 to 0x40,
  for LTDC.
- DDR_PCFGWQOS0_0: change vpr level from
  11 to 12 in order to include the CPU on
  the variable priority queue.
- DDR_SCHED: fix to consider 13 levels  (13 levels - 1 = 0xC)

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23 11:38:10 +02:00
Patrick Delaunay
c60fed14f6 stm32mp1: ram: change ddr speed to kHz
Allow fractional support in DDR tools.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23 11:38:10 +02:00
Qiang Zhao
7e817c70ca arm: dts: fsl-ls1028a: add sp805 watchdog node
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22 12:24:24 +05:30
Peng Ma
e765ee5c50 ARM: dts: Freescale: Add ecc addr for sata node
Move the ecc addr from driver to dts.

Signed-off-by: Peng Ma <peng.ma@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22 12:24:24 +05:30
Yuantian Tang
f278a21749 armv8: ls1028aqds: Add support of LS1028AQDS
LS1028AQDS Development System is a high-performance
computing, evaluation, and development platform that supports
LS1028A QorIQ Architecture processor.

Signed-off-by: Sudhanshu Gupta <sudhanshu.gupta@nxp.com>
Signed-off-by: Rai Harninder <harninder.rai@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Signed-off-by: Tang yuantian <andy.tang@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22 12:24:24 +05:30
Yuantian Tang
353f36d96e armv8: ls1028ardb: Add support for LS1028ARDB
LS1028A is an ARMv8 implementation. LS1028ARDB is an evaluation
platform that supports the LS1028A family SoCs. This patch add basic
support of the platform.

Signed-off-by: Sudhanshu Gupta <sudhanshu.gupta@nxp.com>
Signed-off-by: Rai Harninder <harninder.rai@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22 12:24:24 +05:30
Yuantian Tang
d4ad111dc4 armv8: ls1028a: Add NXP LS1028A SoC support
Ls1028a SoC is based on Layerscape Chassis Generation 3.2
architecture with features:
 2 ARM v8 Cortex-A72 cores, CCI400, SEC, DDR3L/4, LCD, GPU, TSN
 ENETC, 2 USB 3.0, 2 eSDHC, 2 FlexCAN, 2 SPI, SATA, 8 I2C controllers,
 6 LPUARTs, GPIO, SAI, qDMA, eDMA, GIC, TMU etc.

Signed-off-by: Sudhanshu Gupta <sudhanshu.gupta@nxp.com>
Signed-off-by: Rai Harninder <harninder.rai@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22 12:24:24 +05:30
Hou Zhiqiang
a8d6050543 armv8: lx2160a: add PCIe controller DT nodes
The LX2160A integrated 6 PCIe Gen4 controllers.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22 12:24:24 +05:30
Tom Rini
b9625abe03 - update for using splashfile instead of location->name
when loading the splash image from a FIT
 - updates for loading internal and external splash data from FIT
 - DM_GPIO/DM_VIDEO migration for mx53 cx9020 board
 - fix boot issue on mx6sabresd board after DM_VIDEO migration
 - increase the max preallocated framebuffer BPP to 32 in ipuv3
   driver to prepare for configurations with higher color depth
 - allow to use vidconsole_put_string() in board code for text
   output on LCD displays
 -----BEGIN PGP SIGNATURE-----
 
 iGwEABECACwWIQSC4hxrSoIUVfFO0kRM6ATMmsalXAUCXOK5Sw4cYWd1c3RAZGVu
 eC5kZQAKCRBM6ATMmsalXBvoAJ96YrInVKKWtuVigA9lNpk5xbmbeQCdG9wML4LI
 dBbQyzD3mNqvnDMyNPQ=
 =Plt7
 -----END PGP SIGNATURE-----

Merge tag 'video-for-2019.07-rc3' of git://git.denx.de/u-boot-video

- update for using splashfile instead of location->name
  when loading the splash image from a FIT
- updates for loading internal and external splash data from FIT
- DM_GPIO/DM_VIDEO migration for mx53 cx9020 board
- fix boot issue on mx6sabresd board after DM_VIDEO migration
- increase the max preallocated framebuffer BPP to 32 in ipuv3
  driver to prepare for configurations with higher color depth
- allow to use vidconsole_put_string() in board code for text
  output on LCD displays
2019-05-21 07:12:46 -04:00
Peng Fan
9002e735e7 imx: mx6sabresd: fix boot hang with video
Meet the following boot hang.
"
U-Boot SPL 2019.04-00661-gdc80a012e4 (Apr 25 2019 - 10:31:57 +0800)
Trying to boot from MMC1

U-Boot 2019.04-00661-gdc80a012e4 (Apr 25 2019 - 10:31:57 +0800)

CPU:   Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz)
CPU:   Automotive temperature grade (-40C to 125C)Reset cause: POR
Model: Freescale i.MX6 Quad SABRE Smart Device Board
Board: MX6-SabreSD
I2C:   ready
DRAM:  1 GiB
Video device 'ipu@2400000' cannot allocate frame buffer memory -ensure the device is set up before relocation
Error binding driver 'ipuv3_video': -28
Video device 'ipu@2800000' cannot allocate frame buffer memory -ensure the device is set up before relocation
Error binding driver 'ipuv3_video': -28
Some drivers failed to bind
Error binding driver 'generic_simple_bus': -28
Some drivers failed to bind
initcall sequence 4ffe4500 failed at call 1780dfb7 (err=-28)
"

1. fdtdec_get_alias_seq will use "video" as base, however in alias node,
   we use ipux, so add new alias for U-Boot dts.
2. DM_VIDEO is enabled, however reserve_video is called before
   relocation, so to make DM_VIDEO work before relocation, need to
   set SYS_MALLOC_F_LEN
3. defconfig is updated with savedefconfig

 Note: I do not have a video panel to test, but with this patch, U-Boot
       boots up again, below log.

"
U-Boot SPL 2019.04-00662-g0b62453bff (Apr 25 2019 - 10:36:31 +0800)
Trying to boot from MMC1

U-Boot 2019.04-00662-g0b62453bff (Apr 25 2019 - 10:36:31 +0800)

CPU:   Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz)
CPU:   Automotive temperature grade (-40C to 125C) at 34C
Reset cause: POR
Model: Freescale i.MX6 Quad SABRE Smart Device Board
Board: MX6-SabreSD
I2C:   ready
DRAM:  1 GiB
PMIC:  PFUZE100 ID=0x10
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 3
Loading Environment from MMC... *** Warning - bad CRC, using default environment

PCI:   pcie phy link never came up
In:    serial
Out:   serial
Err:   serial
Net:   FEC [PRIME]
Hit any key to stop autoboot:  0
"

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-05-20 11:58:01 +02:00
Steffen Dirkwinkel
c11599b473 arm: imx: add ipu to imx53.dts and set dm-pre-reloc
The ipu node in imx53 is needed for DM_VIDEO. We also need to set
u-boot,dm-pre-reloc to initialize before relocation.

Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
2019-05-20 11:57:24 +02:00
Stefan Roese
1718a9f3b7 arm: mvebu: armada-370-xp.dtsi: Add "u-boot, dm-pre-reloc" to "internal-regs"
Without this U-Boot specific property, booting on Armada XP theadorable
fails in SPL. All nodes in the "internal-regs" (simple-bus) DT node are
not scanned, so the UART node is missing (and others).

I'm not adding this property in an *u-boot.dtsi file, since there is
none matching the generic rules for all files including this dtsi
file. So to not miss any of the boards using this dtsi file, I'm
adding it to this file directly, which makes the Linux merge a less
easy unforunately.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Chris Packham <judge.packham@gmail.com>
Cc: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
2019-05-20 09:27:36 +02:00
Philippe Reynes
ea1e9c04fd dt: bcm63158: watchdog should use a 50Mhz clock
The watchdog should use a clock at 50 Mhz, so
instead of using the clock osc (200 Mhz), we
define a reference clock at 50Mhz and use it
for both watchdog.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-05-18 12:31:59 -04:00
Philippe Reynes
a328ada441 dt: bcm6858: watchdog should use a 50Mhz clock
The watchdog should use a clock at 50 Mhz, so
instead of using the clock osc (200 Mhz), we
define a reference clock at 50Mhz and use it
for both watchdog.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-05-18 12:31:59 -04:00
Tom Rini
b51d103cab Merge branch 'master' of git://git.denx.de/u-boot-socfpga
- SoCFPGA DT and reset cleanup, AE MCVEVK board support.
2019-05-16 07:09:33 -04:00
Tom Rini
8b1d3d19be STM32 MCUs update:
_ Add MPU region for SPI NOR memory mapped region
 _ Add missing QSPI flash compatible for STM32 F7 boards
 _ Update spi-tx-bus-width and spi-rx-bus-width properties
 _ Add QSPI support for STM32F469 Discovery board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJc2tW5AAoJEMrHeC97M/+mNuAQAKLWXsT1OUS23DZFXUPsIAYI
 jIMGmrtVPb0KxK8YZfoTYebAUkE604FoKYNuo59SGBCw0ckunzWd9eLjwysdMY0X
 +kg12ynyPu+XSc4ffTYoGB7JkPH8xqaOzUDMnio730Wa9HGqBQQkK5c5Cx1cYXY2
 22pUE7ozeoGFiYqhcXtAKlfXPYW1AqF5HNXN0subLt8V+oT9RTINpYbYtwEcECRF
 ZKa/OerzVXtrzA14uRm7adzLsJNlonjJIhRphCcF+zConlTST73uHFNFuB4quR50
 5p03BzFW0yylgxXkZL+3qoyYmfi5fLHm3nxBs5AlQR+i7Deqo73CCjOLTuOgHTM5
 ePFHpZ11ivRgNz9bz0El5TpYXtRcyck6EdrE6JfqPYjk1kRJhtolqbPtyM8v25Rg
 PQHiqsEYwfr0jhpcyJiiMaZHifcB5TFXmPpkBH9BSWY9vJ49ONCB4THn68JBo5NQ
 vAFhvFZCKDtYiW0h5q3OorUbCduoIkbouvO1FS0Ml2qh1Fve++rl4fQq2snIdb8j
 l0Fw2KQkfXOZ24hcXF09zqdtZ81qjAswkMhEkryh0mvp+iKQeWDtGgH18y2BTuNV
 +Aw1yiT5Gu2+0IaHEhuKI2Ygj4/1/MBnQVhGvC0vLsUgRHDk6F7wAjqA+Dd5XsPm
 tg8hUwgtuXlSl/Ql+6C7
 =1cOA
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-mcu-20190514' of https://github.com/pchotard/u-boot

STM32 MCUs update:
_ Add MPU region for SPI NOR memory mapped region
_ Add missing QSPI flash compatible for STM32 F7 boards
_ Update spi-tx-bus-width and spi-rx-bus-width properties
_ Add QSPI support for STM32F469 Discovery board
2019-05-15 07:10:32 -04:00
Marek Vasut
9e6ed1a346 ARM: dts: socfpga: Keep FPGA bridge entries in SPL DT
Keep the FPGA bridge entries in SPL DT to let do_bridge_reset() toggle
the bridges on/off as needed according to the handoff file.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Cc: Tien Fong Chee <tien.fong.chee@intel.com>
2019-05-14 19:53:16 +02:00
Marek Vasut
917bd8a876 ARM: dts: socfpga: Factor out U-Boot specifics from A10 handoff files
Pull out the u-boot,dm-pre-reloc from socfpga_arria10_socdk_sdmmc_handoff.dtsi
into separate dtsi header file to make it easier to patch in custom handoff
dtsi files, without having to manually add the U-Boot bits. Shuffle the include
clauses in the A10 DT files to make it obvious what gets included where without
having to follow confusing long chain of includes, i.e. board DT file includes
everything it needs.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Cc: Tien Fong Chee <tien.fong.chee@intel.com>
2019-05-14 19:53:16 +02:00
Wolfgang Grandegger
990ed4452c arm: socfpga: Re-add support for Aries MCV SoM and MCVEV[KP] board
Re-add support for Aries Embedded MCV SoM, which is CycloneV based
and the associated MCVEVK and MCVEVP baseboard. The board can boot
from eMMC. Ethernet and USB is supported.

The Aries Embedded boards have been removed with commit 03b54997d5
("board/aries: Remove"). I will now take care of them.

The device-tree files are from mainline Linux commit e93c9c99a629
("Linux v5.1)".

Signed-off-by: Wolfgang Grandegger <wg@aries-embedded.de>
CC: Marek Vasut <marex@denx.de>
CC: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-05-14 19:52:39 +02:00
Tien Fong Chee
0a42a132a4 ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Add FPGA driver to support program FPGA with FPGA bitstream loading from
filesystem. The driver are designed based on generic firmware loader
framework. The driver can handle FPGA program operation from loading FPGA
bitstream in flash to memory and then to program FPGA.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2019-05-10 22:48:11 +02:00
Tom Rini
f30f268a07 Merge tag 'rockchip-for-v2019.07-rc1' of git://git.denx.de/u-boot-rockchip
Improvements and new features:
- split more rockchip pinctrl_core feature into per SoC
- enable TPL for evb-rk3399 board
- enable TPL/SPL for evb-px5 board
- enable TPL and OP-TEE support for evb-rk3229
- update fix in arm common assembly start code for rockchip header file
- update default SPL_FIT_GENERATOR for rockchip
- rk3399 boards update to use '-u-boot.dtsi'
- add new rk3399 boards: Nanopi M4, Nanopc T4
- enable sound for chromebook_minnie
2019-05-09 12:36:17 -04:00
Tom Rini
062aceb8bf Merge git://git.denx.de/u-boot-marvell
- DM updates for multiple MVEBU boards (Stefan)
- Add CRS305-1G-4S board (Luka)
- Enable MMC in SPL on clearfog (Baruch)
2019-05-09 07:12:25 -04:00
Jagan Teki
65cc7dcd77 rockchip: rk3399: Add Nanopc T4 board support
Add initial support for Nanopc T4 board.

Specification
- Rockchip RK3399
- Dual-Channel 4GB LPDDR3-1866
- SD card slot
- 16GB eMMC
- RTL8211E 1Gbps
- AP6356S WiFI/BT
- HDMI In/Out, DP, MIPI DSI/CSI, eDP
- USB 3.0, 2.0
- USB Type C power and data
- GPIO expansion ports
- DC 12V/2A

Commit details of rk3399-nanopc-t4.dts sync from Linux 5.1-rc2:
"arm64: dts: rockchip: Add NanoPC-T4 IR receiver"
(sha1: 95658e21b1707ad7844f873db2fdaa295109a5a3)

Tested-by: Daniel Gröber <dxld@darkboxed.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-09 18:24:31 +08:00
Jagan Teki
b2f5da9dd0 rockchip: rk3399: Add Nanopi M4 board support
Add initial support for Nanopi M4 board.

Specification
- Rockchip RK3399
- Dual-Channel 4GB LPDDR3-1866
- SD card slot
- eMMC socket
- RTL8211E 1Gbps
- AP6356S WiFI/BT
- HDMI In/Out, DP, MIPI DSI/CSI
- USB 3.0 x4
- USB Type C power and data
- GPIO1, GPIO2 expansion ports
- DC5V/3A

Commit details of rk3399-nanopi-m4.dts sync from Linux 5.1-rc2:
"arm64: dts: rockchip: Refine nanopi4 differences"
(sha1: c62ffaf5026d0b7633e62b2cea8450b5543c349a)

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-09 18:24:31 +08:00
Jagan Teki
adc91db0e6 rockchip: dts: rk3399: nanopi4: Use CD pin as RK_FUNC_1
Attaching GPIO functionality to SDMMC0_DET pin (which
does in Linux base dts) make dwmmc driver "fail to detect
the card".

  Card did not respond to voltage select!

It may be because the existing driver can't support gpio
card detection. So, change the pinctrl functionality from
RK_FUNC_GPIO to RK_FUNC_1 like other rk3399 dts does via
sdmmc_cd pin.

Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-09 18:23:16 +08:00
Baruch Siach
13cba82b51 arm: mvebu: clearfog: add MMC to SPL DT
This allows SPL to load the main U-Boot image from MMC once DM_MMC is
enabled.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-05-09 07:35:04 +02:00
Luka Kovacic
22bb913fdf arm: mvebu: Add CRS305-1G-4S board
CRS305-1G-4S has a switch chip with an integrated CPU (98DX3236) and
like some of the other similar boards requires bin_hdr.
bin_hdr (DDR3 init stage) is currently retrieved from the stock
bootloader and compiled into the kwb image.

Adds support for U-Boot, enable UART, SPI, Winbond SPI flash chip
support and writing env to SPI flash.

Signed-off-by: Luka Kovacic <me@lukakovacic.xyz>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-05-09 07:35:04 +02:00
Tom Rini
eb511984e9 Merge branch 'master' of git://git.denx.de/u-boot-net
- Various PHY fixes / enhancements.
- TI K2G fixes
2019-05-08 22:46:31 -04:00
James Byrne
83f71ef558 net: phy: micrel: Use correct skew values on KSZ9021
Commit ff7bd212cb ("net: phy: micrel: fix divisor value for KSZ9031
phy skew") fixed the skew value divisor for the KSZ9031, but left the
code using the same divisor for the KSZ9021, which is incorrect.

The preceding commit c16e69f702 ("net: phy: micrel: add documentation
for Micrel KSZ90x1 binding") added the DTS documentation for the
KSZ90x1, changing it from the equivalent file in the Linux kernel to
correctly state that for this part the skew value is set in 120ps steps,
whereas the Linux documentation and driver continue to this day to use
the incorrect value of 200 that came from the original KSZ9021 datasheet
before it was corrected in revision 1.2 (Feb 2014).

This commit sorts out the resulting confusion in a consistent way by
making the following changes:

- Update the documentation to be clear about what the skew values mean,
in the same was as for the KSZ9031.

- Update the Micrel PHY driver to select the appropriate divisor for
both parts.

- Adjust all the device trees that state skew values for KSZ9021 PHYs to
use values based on 120ps steps instead of 200ps steps. This will result
in the same values being programmed into the skew registers as the
equivalent device trees in the Linux kernel do, where it incorrectly
uses 200ps steps (since that's where all these device trees were copied
from).

Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-08 17:27:01 -05:00
Tom Rini
504bf790da Merge branch 'master' of git://git.denx.de/u-boot-sunxi
- H6 Beelink GS1 board (Clément)
- Olimex A64-Teres-I board (Jonas)
- sunxi build fix for CONFIG_CMD_PXE|DHCP (Ondrej)
- Change include order (Jagan)
- EPHY clock changes (Jagan)
- EMAC enablement on Cubietruck Plus, BPI-M3 (Chen-Yu Tsai)
2019-05-08 16:21:43 -04:00
Jonas Smedegaard
997b857ae3 sun50i: a64: Add Olimex A64-Teres-I board initial support
Olimex A64-Teres-I board is a mainboard (the only one so far)
for Olimex Teres-I DIY laptop kit.

Key features:
- Allwinner A64 Cortex-A53
- Mali-400MP2 GPU
- AXP803 PMIC
- 2GB DDR3 RAM
- MicroSD Slot
- 16GB eMMC Flash
- eDP LCD display
- HDMI
- USB Host
- Battery management
- 5V DC power supply
- Certified Open Source Hardware (OSHW)

Works:
- i2C
- MMC/SD
- PWM backlight

Known broken:
- Internal keyboard (seems to be because the keyboard firmware loads a
bootloader first, and then disconnects bootloader and connect real
keyboard). External ones connected to the USB port work fine.

This patch enables support for the A64-Teres-I board to u-boot,
including enabling screen backlight (lacking from Linux device-tree).

Linux commit details about the sun50i-a64-teres-i.dts sync:
"arm64: dts: allwinner: a64: Rename uart0_pins_a label to uart0_pb_pins"
(sha1: d91ebb95b96c8840932dc3a10c9f243712555467)

Cosmetic warnings regarding whitespace and placement of SPDX notice for
dts file was ignored.

config and .dtsi file are adapted from pinebook files.

Tested-by: Jonas Smedegaard <dr@jones.dk>
Signed-off-by: Jonas Smedegaard <dr@jones.dk>
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
[jagan: move board entry in MAINTAINERS file at proper position]
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-05-09 00:44:13 +05:30
Jagan Teki
d364e6bdd7 rockchip: dts: rk3399: Sync rk3399-nanopi4.dtsi from Linux
Sync rk3399-nanopi4.dtsi from Linux 5.1-rc2 tag.

Linux commit details about the rk3399-nanopi4.dtsi sync:
"arm64: dts: rockchip: Add nanopi4 bluetooth"
(sha1: 3e2f0bb72be36aa6c14ee7f11ac4dd8014801030)

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08 17:34:13 +08:00
Jagan Teki
e0bca2821f rockchip: dts: rk3399: Sync pwm2_pin_pull_down from Linux 5.1-rc2
To make successful build with dts(i) files syncing from Linux 5.1-rc2
the rk3399.dtsi would require pwm2_pin_pull_down.

So, sync the pwm2_pin_pull_down node from Linux 5.1-rc2.  Since this
node is strictly not part of any commit alone, I have mentioned
Linux 5.1-rc2 tag for future reference of where would this sync
coming from.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08 17:34:13 +08:00
Jagan Teki
90430fa895 arm64: rockchip: dts: rk3399: Use rk3399-u-boot.dtsi
Now we have
- board specific -u-boot.dtsi files for board specific u-boot
  dts changes.
- soc specific rk3399-u-boot.dtsi for soc specific u-boot
  dts changes.

So, include the rk3399-u-boot-dtsi on respective board -u-boot.dtsi
and drop the properties which are globally available in rk3399-u-boot.dtsi

Right now rk3399-u-boot.dtsi has sdmmc, spi1 u-boot,dm-pre-reloc
property and more properties and nodes can be move further based
on the requirements.

This would fix, the -u-boot.dtsi inclusion for evb, firefly, puma
boards that was accidentally merged on below commit.
"rockchip: dts: rk3399: Create initial rk3399-u-boot.dtsi"
(sha1: e05b4a4fa8)

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08 17:34:13 +08:00
Jagan Teki
b5f88913a6 rockchip: dts: rk3399-u-boot: Add u-boot, dm-pre-reloc for spi1
Add u-boot,dm-pre-reloc property for spi1, so-that the
subsequent rk3399 boards which boot from SPI.

This help to separate the u-boot specific properties away
from base dts files so-that the Linux sync become easy and
meaningful.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08 17:34:13 +08:00
Jagan Teki
ddf49cbf35 arm64: rockchip: dts: rk3399: Add board -u-boot.dtsi files
Devicetree files in RK3399 platform is synced from Linux, like other
platforms does. Apart from these u-boot in rk3399 would also require
some u-boot specific node like dmc.

dmc node has big chunk of DDR timing parameters which are specific
to specific board, and maintained with rk3399-sdram*.dtsi.

So, create board specific -u-boot.dtsi files and move these sdram dtsi
files accordingly. This would help of maintain u-boot specific changes
separately without touching Linux dts(i) files which indeed easy for
syncing from Linux between releases.

These board specific -u-boot.dtsi can be extendible to add more u-boot
specific nodes or properties in future.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08 17:34:13 +08:00
Jagan Teki
82d08de9c5 dts: Makefile: Build rockchip dtbs based on SoC types
- Sometimes u-boot specific dtsi files are included
  automatically which would build for entire rockchip SoC,
  even-though the respective dtsi should used it for specific
  family of rockchip SoC.
- Sometimes u-boot specific dts nodes or properties can use
  config macros from respective rockchip family include/configs
  files, example CONFIG_SPL_PAD_TO.

So, it's better to compile the dtbs based on the respective
rockchip family types rather than rockchip itself to avoid
compilation issues.

This patch organize the existing dtb's based on the rockchip
family types.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08 17:34:13 +08:00
Simon Glass
ec107f04b6 rockchip: chromebook_minnie: Enable sound
Enable sound for this board, which has the same codec as jerry.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08 17:34:12 +08:00
Kever Yang
615e9b3cce rockchip: px5: add timer0 dts node as tick timer
Let's use rockchip timer before stimer patches can be merged.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08 17:34:12 +08:00
Kever Yang
4d9dd40d68 rockchip: px5 update dts for spl/tpl
TPL need dmc to init ddr sdram, and emmc, boot-order.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Andy Yan <andy.yan@rock-chips.com>
2019-05-08 17:34:12 +08:00
Kever Yang
d55dbfed16 rockchip: rk322x: dts: enable uart2 for SPL/TPL
When we use DM_SERIAL for serial driver, we need enable the
dts node for the debug console.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08 17:34:12 +08:00
Tom Rini
8d7f06bbbe Merge branch 'master' of git://git.denx.de/u-boot-sh
- RZ/A1 addition.
- Old board removal.
2019-05-07 09:38:00 -04:00
Chris Brandt
ba932bc846 ARM: dts: renesas: Add RZ/A1 GR-Peach board
Add board code and DTs for Renesas RZ/A1 SoC-based GR-Peach,
which is a cheap development platform with RZ/A1H SoC. The
DTs are imported from Linux 5.0.11, commit d5a2675b207d .

Currently supported are UART, ethernet and RPC SPI. The board
can be booted from RPC SPI by writing the u-boot.bin binary
to the beginning of the SPI NOR, e.g. using the "sf" command.
The board can also be booted via JTAG by setting text base to
0x20020000, loading u-boot.bin there via JTAG and executing it
from that address.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-07 05:41:32 +02:00
Chris Brandt
3529596442 ARM: dts: renesas: Add RZ/A1 platform code
Add platform code and DTs for Renesas RZ/A1 R7S72100 SoC.
Distinguishing feature of this SoC is that it has up to
10 MiB of on-SoC static RAM (SRAM).

The DTs are imported from Linux 5.0.11, commit d5a2675b207d .

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-07 05:41:32 +02:00
Ley Foon Tan
bc17990876 arm: dts: Stratix10: Add SDRAM node
Add SDRAM device tree node.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-05-06 12:44:17 +02:00
Patrice Chotard
d51761ffc6 ARM: dts: stm32: Add qspi support for stm32f469-disco board
Add device tree nodes to support qspi for stm32f469-disco board.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-05-06 09:50:28 +02:00
Patrice Chotard
78d5b61c0a ARM: dts: stm32: Set spi-rx/tx-bus-width to 4 for stm32f769-disco
As mx66l512 qspi flash supports quad input fast program and
quad input fast read, set spi-tx_bus-width and spi-rx_bus-width
to 4.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-05-06 09:50:27 +02:00
Patrice Chotard
2f2f68fd91 ARM: dts: stm32: Remove useless spi-nor compatible string
Compatible string "micron,n25q128a13" is useless, remove it.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-05-06 09:50:27 +02:00
Patrice Chotard
7d549cc91f ARM: dts: stm32: Set spi-rx/tx-bus-width to 4 for stm32f746-disco
As n25q128 qspi flash supports quad input fast program and
quad input fast read, set spi-tx_bus-width and spi-rx_bus-width
to 4.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-05-06 09:50:27 +02:00
Patrice Chotard
3fdc11b396 ARM: dts: stm32: Set spi-rx/tx-bus-width to 4 for stm32f746-eval
As n25q512a qspi flash supports quad input fast program and
quad input fast read, set spi-tx_bus-width and spi-rx_bus-width
to 4.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-05-06 09:50:27 +02:00
Patrice Chotard
48769a2824 ARM: dts: stm32: add qspi flash compatible string for stm32f746-eval
Add missing flash compatible string to be able to read/write into
qspi flash.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-05-06 09:50:27 +02:00
Patrice Chotard
b42721d644 ARM: dts: stm32: add qspi flash compatible string for stm32f769-disco
Add missing flash compatible string to be able to read/write into
qspi flash.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-05-06 09:50:26 +02:00
Patrice Chotard
c987e086d9 ARM: dts: stm32: Fix qspi memory map size for stm32f7 boards
stm32f746-disco embeds a 16Mb qspi flash, stm32f746-eval and
stm32f769-disco embeds a 64Mb qspi flash.
Update the reg property accordingly

Remove deprecated memory-map property.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-05-06 09:50:26 +02:00
Tom Rini
4862830b69 Merge git://git.denx.de/u-boot-socfpga
- Misc MMC, FPGA bridge, general SoCFPGA fixes
2019-05-03 14:23:01 -04:00
Tom Rini
b362fe0848 Merge branch '2019-05-03-master-imports'
- Various btrfs fixes
- Various TI platform fixes
- Other fixes (cross build, taurus update, Kconfig help text)
2019-05-03 07:30:55 -04:00
Adam Ford
d66f4fe982 ARM: dts: logicpd-som-lv: Fix MMC1 card detect
The card detect pin was incorrectly using IRQ_TYPE_LEVEL_LOW
instead of GPIO_ACTIVE_LOW when reading the state of the CD pin.

Without this patch, MMC1 won't be detected.

This is the same patch submitted to linux-omap, but I was hoping
to get it applied to U-Boot without having to wait for the
linux adoption and then backporting.

Fixes: 5448ff33f2 ("ARM: DTS: Resync Logic PD SOM-LV 37xx
devkit with Linux 4.18-RC4")

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-05-03 07:30:31 -04:00
Vagrant Cascadian
59a1df084f ti: Add device-tree for am335x-pocketbeagle.
Add device-tree files from linux 5.1-rc7 needed to complete support
for PocketBeagle.

Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-05-03 07:30:31 -04:00
Andreas Dannenberg
7202af927b arm: dts: k3-am654: Sync IOPAD macros with Linux
Transition to the IOPAD macros as used in Linux in which the pin mux
mode is specified using a dedicated parameter while also dropping the
related MUX_MODEx macros that are no longer needed. This transition
will allow us to keep both Linux and U-Boot DTS in sync more easily.
While at it also align the file name of the include file itself and
update any references accordingly.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-05-03 07:30:31 -04:00
Heiko Schocher
0cac0fb022 at91: cleanup taurus port
- at91sam9g20-taurus.dts: use labels
- cleanup taurus port to compile clean with
  current mainline again. SPL has no serial
  output anymore, so it fits into SRAM.

Signed-off-by: Heiko Schocher <hs@denx.de>
2019-05-03 07:30:31 -04:00
Andreas Dannenberg
12df71cd74 armv7R: dts: k3: am654: Switch DMSC TX message thread ID
Switch from using the high priority DMSC transmit message queue used
by the secure R5 MCU island boot context to the low priority message
queue. While the change in priority is irrelevant for the current boot
architecture it however gives us access to a deeper message queue that
will allow us to buffer more messages. This is an important aspect when
sending several messages without requesting and waiting for a response
in a row which is a communication scheme used during core shutdown for
example. See AM654 TISCI User Guide for additional details.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-05-03 07:23:17 -04:00
Tom Rini
3570ea1f98 Improvements and new features:
- improved SPI driver for better read throughput
 - refactors initialisation of debug UART init
 - restructures header file paths
 - adds pinctrl improvements
 
 Adds Kever as a co-custodian.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJcyU2hAAoJECaAFcEOcohNlFsH/3ujz7paIV34ilGGA1BQPJS7
 OOnJ7KOKkWBpwl8ai03n8/sK9kkEshZ8/PQE3E2UeWbwE9knDAREwNynYRqNwv5P
 f/6HuFZ3tCCRfVBsbTpSe4b/BxIn2zavhMQVfgd8kYaSY7dWzeaBB28GbKxfApHY
 ysNF5Q5oGMwTaL322vpFOmk/a5rHrSI8KJloDzTWxAPbNRIf3fUhwl1imSbGB6RP
 wWwuBCfbTcvw9+F4bK2W3q+umSg7o9zPwwno7Invh/nPqe5ExrVuzalRG4+1vtXe
 3jBKWTVFYX2KPDBpAfaMItehGPeGJet7+mU4GcW1FaCtlyE9QqXKfZknplCfKyU=
 =NpSn
 -----END PGP SIGNATURE-----

Merge tag 'rockchip-for-2019.07' of git://git.denx.de/u-boot-rockchip

Improvements and new features:
- improved SPI driver for better read throughput
- refactors initialisation of debug UART init
- restructures header file paths
- adds pinctrl improvements

Adds Kever as a co-custodian.
2019-05-01 11:52:04 -04:00
Tom Rini
b4ee6daad7 Porting to DM and i.MX8
------------------------
 
 - warp7 to DM
 - kp_imx53 to DM
 - Warnings in DT
 - MX8QM support
 - colibri-imx6ull to DM
 - imx7d-pico to DM
 - ocotp for MX8
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAlzDBtoPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3UpQL/ipaUejQOOr00oOgUBQqt3JCPZ7KNu8ruih/
 nIFUDrI8nP+4psaOhRp1sEPFJUxUjdIqODeAZD8zrlEi1pXNAgPWYrFRfbz54bzw
 jLsqqMz1/djQseLydQTcqZTSz8Ys7o+8OfKH64fdsZn+y9no9tHBN5hz5qWdXexN
 kbyykkg8TJC3eUyRZqKuULOqzDV9BAdASOXu7UTa04sEekLdVvS2+zkUdB6UVZTN
 LOAzm+7xY8Tey1BZxLuZUJDpHzFEMvPvlbbQRrxeDn/feZJwNgIP6hGcMeVOwOIf
 KEwFn/m/HI2JWS4taXb5aT+v3xmiQvyCC3jNW0XTf5rq02pbfgyPsVhGQIGyU2yY
 Fj7zIN7hVCLJNBpctvXyuAd1MjOlGEPIrHNjRnIZjtr7/iA1AIRn7Hg4cGNCHw6V
 5gdza3B/xFODN+Ts6O+UVIukI61MJ6mGGdNCueOnWDviNROOL82D7Jh02KfNNNxR
 q+yPsHSpo6rC1MGXv4SOReZtgpng/w==
 =CzWQ
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20190426' of git://git.denx.de/u-boot-imx

Porting to DM and i.MX8
------------------------

- warp7 to DM
- kp_imx53 to DM
- Warnings in DT
- MX8QM support
- colibri-imx6ull to DM
- imx7d-pico to DM
- ocotp for MX8
2019-05-01 07:25:51 -04:00
Jagan Teki
ed9c9059f2 rockchip: rk3399: Add Orangepi RK3399 support
Add initial support for Orangepi RK3399 board.

Specification
- Rockchip RK3399
- 2GB/4GB DDR3
- 16GB eMMC
- SD card slot
- RTL8211E 1Gbps
- AP6356S WiFI/BT
- HDMI In/Out, DP, MIPI DSI/CSI
- Mini PCIe
- Sensors, Keys etc
- DC12V-2A and DC5V-2A

Commit details about Linux DTS sync:
"arm64: dts: rockchip: Add support for the Orange Pi RK3399"
(sha1: d3e71487a790979057c0fdbf32f85033639c16e6)

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-01 00:00:05 +02:00
Jagan Teki
e05b4a4fa8 rockchip: dts: rk3399: Create initial rk3399-u-boot.dtsi
u-boot,dm-pre-reloc is required for SDMMC booted rk3399 boards and
which is U-Boot specific devicetrees binding.

Move it on global rk3399-u-boot.dtsi file and rest of the U-Boot
bindings will move it future based on the requirement.

This would help to sync the devicetrees from Linux whenever required
instead of adding specific nodes.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-01 00:00:05 +02:00
Jagan Teki
288dbc66da rockchip: dts: rk3399: Sync rk3399-opp from Linux
Sync rk3399-opp.dtsi from Linux.

Linux commit details about the rk3399-opp.dtsi sync:
"arm64: dts: rockchip: use SPDX-License-Identifier"
(sha1: 4ee99cebd486238ac433da823b95cc5f8d8a6905)

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-05-01 00:00:04 +02:00
Simon Goldschmidt
7110259f55 dts: arm: socfpga: fix socfpga_de10_nano console
Booting this board failed as the initial console isn't found since
commit c402e81702 ("dts: arm: socfpga: merge gen5 devicetrees from linux")

The uart0 devicetree entry was missing "clock-frequency = <100000000>:"
since that commit

Fixes: c402e81702 ("dts: arm: socfpga: merge gen5 devicetrees from linux")
Reported-by: rafael mello <rafaelmello_3@hotmail.com>
Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-04-29 20:33:23 +02:00
Heinrich Schuchardt
b85d155199 arm: dts: add missing vexpress device trees
Add the device trees for

* vexpress_ca5x2_defconfig
* vexpress_ca9x4_defconfig
* vexpress_ca15_tc2_defconfig

as available in Linux 5.1 rc5.

We are using the vexpress_ca15_tc2_defconfig and vexpress_ca9x4_defconfig
for Travis testing via QEMU.

The UEFI base Embedded Base Boot Requirements Specification (EBBR) requires
that an embedded board either provides a device tree or an ACPI table.

All block devices are meant to be moved to the driver model. On ARM this
requires a device tree.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-26 18:58:22 -04:00
Chris Packham
d55254ab77 ARM: kirkwood: add db-88f6281-bp board
This is Marvell's Kirkwood development board. It has the following
features

 - 512M DDR2
 - 2 PCI connectors
 - 1 x1 PCI-e interface
 - 1 Gigabit Ethernet Port
 - 2 SATA Ports
 - USB 2.0 Interface
 - SDIO
 - 128M NAND Flash
 - 16M SPI Flash

It can be strapped to boot from SPI or NAND so there are two defconfigs
(one per boot media).

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-04-26 07:35:38 +02:00
Stefan Roese
9408665709 arm: kirkwood: dts: Add openrd-* dtb makefile build targets
The following Kirkwood dtb build targets are currently missing:

kirkwood-openrd-base.dtb
kirkwood-openrd-client.dtb
kirkwood-openrd-ultimate.dtb

This patch adds them to the Makefile to fix the build error.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-04-26 07:35:38 +02:00
Pierre-Jean Texier
6b503f9e65 warp7: Switch to DM USB
This commit switches to DM USB for warp7 and warp7_bl33 defconfigs.

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-04-25 19:21:00 +02:00
Pierre-Jean Texier
0710726d04 warp7: Switch to DM Serial
This commit switches to DM SERIAL for warp7 and warp7_bl33 defconfigs.

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-04-25 19:20:32 +02:00
Marcel Ziswiler
d32273b91c ARM: dts: colibri-imx6ull: update device tree
Fix compatible node to use regular Toradex notation.
Annotate device tree with standard Colibri pin muxing comments.
Use open-drain I2C pin muxings.
Alphabetically re-order iomuxc nodes.
Rename snvs-ad7879-int-grp touch interrupt node as per Linux device tree.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25 19:18:50 +02:00
Marcel Ziswiler
d487351959 ARM: dts: colibri-imx6ull: add osc32k_32k_out pinctrl
Add GPIO1_IO03__OSC32K_32K_OUT pin muxing.
While at it also fix indentation of pinfunc header file.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25 19:18:46 +02:00
Marcel Ziswiler
7b69baea42 ARM: dts: i.MX6Q: fix avoid_unnecessary_addr_size warnings
Re-synced the device tree with Linux 5.0.

This fixes the following warnings:

w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/
 port@2/endpoint@0:reg: property has invalid length (4 bytes)
 (#address-cells == 2, #size-cells == 1)
w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/
 port@2/endpoint@1:reg: property has invalid length (4 bytes)
 (#address-cells == 2, #size-cells == 1)
w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/
 port@2/endpoint@2:reg: property has invalid length (4 bytes)
 (#address-cells == 2, #size-cells == 1)
w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/
 port@2/endpoint@3:reg: property has invalid length (4 bytes)
 (#address-cells == 2, #size-cells == 1)
w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/
 port@2/endpoint@4:reg: property has invalid length (4 bytes)
 (#address-cells == 2, #size-cells == 1)
w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/
 port@3/endpoint@1:reg: property has invalid length (4 bytes)
 (#address-cells == 2, #size-cells == 1)
w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/
 port@3/endpoint@2:reg: property has invalid length (4 bytes)
 (#address-cells == 2, #size-cells == 1)
w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/
 port@3/endpoint@3:reg: property has invalid length (4 bytes)
 (#address-cells == 2, #size-cells == 1)
w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@2800000/
 port@3/endpoint@4:reg: property has invalid length (4 bytes)
 (#address-cells == 2, #size-cells == 1)
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@2/endpoint@0: Relying on default #address-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@2/endpoint@0: Relying on default #size-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@2/endpoint@1: Relying on default #address-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@2/endpoint@1: Relying on default #size-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@2/endpoint@2: Relying on default #address-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@2/endpoint@2: Relying on default #size-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@2/endpoint@3: Relying on default #address-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@2/endpoint@3: Relying on default #size-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@2/endpoint@4: Relying on default #address-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@2/endpoint@4: Relying on default #size-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@3/endpoint@1: Relying on default #address-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@3/endpoint@1: Relying on default #size-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@3/endpoint@2: Relying on default #address-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@3/endpoint@2: Relying on default #size-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@3/endpoint@3: Relying on default #address-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@3/endpoint@3: Relying on default #size-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@3/endpoint@4: Relying on default #address-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_default_addr_size):
 /soc/ipu@2800000/port@3/endpoint@4: Relying on default #size-cells
 value
w+arch/arm/dts/imx6-apalis.dtb: Warning (avoid_unnecessary_addr_size):
 Failed prerequisite 'avoid_default_addr_size'

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-25 19:16:24 +02:00
Parthiban Nallathambi
d8d33b6d4d imx: Add variscite DART-6UL Evaluation Kit
Port for the DART-6UL Evaluation Kit SBC. Based on the variscite
DART-6UL iMX6ULL SoM.

CPU:   Freescale i.MX6ULL rev1.1 900 MHz (running at 396 MHz)
CPU:   Commercial temperature grade (0C to 95C) at 43C
Reset cause: POR
Model: Variscite DART-6UL Evaluation Kit
Board: Variscite DART-6UL Evaluation Kit
DRAM:  512 MiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
In:    serial@02020000
Out:   serial@02020000
Err:   serial@02020000
Net:   FEC0

Working:
 - Eth0
 - i2c
 - MMC/SD
 - eMMC
 - USB host
 - UART 1

Note: LCDIF porting needs DM_VIDEO
https://lists.denx.de/pipermail/u-boot/2019-April/365506.html

Signed-off-by: Parthiban Nallathambi <parthitce@gmail.com>
2019-04-25 19:16:24 +02:00
Filip Brozovic
8e10571f09 dts: imx6ull: add USB aliases to support DM
Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
2019-04-25 19:16:24 +02:00
Joris Offouga
4e267b92fb pico-imx7d: Convert DM MMC
This patch enable convert DM MMC for imx7d-pico board and variant.

Before the DM conversion only usdhc3 was enabled and therefore it appeared
as MMC 0 to u-boot. After enabling MMC DM though usdhc3 defaults to MMC 2,
which left unattended would drive changes to existing pico-pi bootscripts and
environment variables that rely on mmc 0.

Setup the alias of mmc0 and usdhc3 so that existing pico-imx7d boot code will
work unmodified.

When converting to DM_MMC it is necessary that SPL initializes eMMC
by itself, so move the original eMMC initialization from U-Boot
proper to SPL.

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-04-25 19:16:24 +02:00
Marcel Ziswiler
270f1fb7b2 arm: dts: imx8dx: add lpuart1, lpuart2, lpuart3
Add support for lpuart1, lpuart2 and lpuart3.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25 19:16:24 +02:00
Joris Offouga
7c748933e3 Arm: imx7d-pico: Import all Linux device tree for Pico i.MX7D SOM
This patch imports the Linux kernel base board imx7d-pico.dtsi,
pi board imx7d-pico-pi.dts and hobbit board imx7d-pico-hobbit.dts
from Linux v5.1-rc1.

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
2019-04-25 19:16:24 +02:00
Marcel Ziswiler
9233c3d377 ARM: dts: colibri-imx6ull: fix uart-has-rtscts property
Remove vendor pre-fix fsl, from uart-has-rtscts property.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25 17:03:25 +02:00
Marcel Ziswiler
5d67b73c1a colibri-imx6ull: migrate fec to using driver model
Migrate Ethernet FEC to using driver model.
Drop PHY_MICREL_KSZ90X1 which slipped in from Apalis iMX6.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25 17:03:25 +02:00
Marcel Ziswiler
87b32297f5 colibri-imx6ull: migrate usb to using driver model
Migrate USB to using driver model.
Add USBH_PEN GPIO regulator.
While at it also add alias e.g. as required for UMS.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25 17:03:25 +02:00
Marcel Ziswiler
535800d33f colibri-imx6ull: migrate mmc to using driver model
Migrate MMC to using driver model.
Migrate USDHC to using pinctrl.
While at it also add GPIO1_IO03__OSC32K_32K_OUT pin muxing.
While at it also update copyright period.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25 17:03:25 +02:00
Marcel Ziswiler
75b942df87 colibri_vf: fix ethernet by adding explicit phy node
The implicit fallback mechanism for searching the whole MDIO bus for at
least one PHY has been gone with the following commit b882005a18
("drivers/net/fec: phy_init: remove redundant logic"). This lead to the
Ethernet driver erroring out as follows:

Net:   Could not get PHY for FEC0: addr -19
eth-1: fec@400d1000
Colibri VFxx # dhcp
Could not get PHY for FEC0: addr -19
Could not get PHY for FEC0: addr -19
Could not get PHY for FEC0: addr -19
Could not get PHY for FEC0: addr -19
No ethernet found.
Could not get PHY for FEC0: addr -19
Colibri VFxx #

This commit adds an explicit PHY node which makes it work again.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25 17:03:25 +02:00
Peng Fan
0d331c035a imx: support i.MX8QM MEK board
Add i.MX8QM MEK board support.
Included a basic dts, enabled SPL FIT

Boot log as below:
U-Boot SPL 2019.01-rc1-00029-gf002213219 (Dec 24 2018 - 10:28:30 +0800)
Normal Boot
Trying to boot from MMC2_2

U-Boot 2019.01-rc1-00029-gf002213219 (Dec 24 2018 - 10:28:30 +0800)

CPU:   NXP i.MX8QM RevB A53 at 142933 MHz

Model: Freescale i.MX8QM MEK
Board: iMX8QM MEK
Build: SCFW 9330215b
Boot:  SD1
DRAM:  6 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial@5a060000
Out:   serial@5a060000
Err:   serial@5a060000
Net:
Error: ethernet@5b040000 address not set.
eth-1: ethernet@5b040000
Hit any key to stop autoboot:  0

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-25 17:03:25 +02:00
Peng Fan
b18da229a3 arm: dts: introduce dtsi for i.MX8QM
Introduce basic dtsi for i.MX8QM, only support SDHC/FEC/LPUART.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-25 17:03:25 +02:00
Lukasz Majewski
e626fcb6e2 DTS: Enable USB host support (including regulators) on HSC|DDC boards
This commit enables the support for K&P's HSC|DDC imx53 based boards.
It was also necessary to provide device tree description for regulators
to avoid board specific code definition.

The GPIO pin description responsible for VBUS control has been moved from
"hog" group to usbh1 dedicated one.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25 17:03:25 +02:00
Lukasz Majewski
552b1b3142 DTS: Provide USB host DTS description for i.MX53 devices
This code has been ported from Linux kernel - tag v5.1-rc2.
The difference from the kernel is the removal of:
fsl,usbmisc = <&usbmisc 1>;
fsl,usbphy = <&usbphy1>;

properties, which are not needed for correct u-boot operation (as PHY
setup is done in ehci-mx5.c file itself).

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25 17:03:25 +02:00
Lukasz Majewski
fc77d4d6db DTS: Add esdhc3 device tree description tuning for HSC|DDC boards
In this commit the esdhc3 controller is enabled as well as it is remaped
to mmc0 to not break legacy code.

The pinctrl setup (e.g. 0x1e4) is the same as one from in-board file
definition.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25 17:03:25 +02:00
Peng Fan
e5b8f7e665 imx8qxp: mek: enable dm-spl for pm
with u-boot,dm-spl added for imx8qx-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-25 17:03:25 +02:00
Tom Rini
c2bb9c5b9e STM32 MCUs update:
_ DT rework and alignment with DT kernel v4.20
 _ mmc: arm_pl180_mmci: Synchronize compatible with kernel v4.20
 _ mmc: stm32_sdmmc2: Synchronize properties with kernel v4.20
 _ configs: update for F746/769 boards
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJcvxeXAAoJEMrHeC97M/+mkpgP/0Xi+pN81lXGEELdVARyu3o9
 g45Ap+xgARgMwtnwtDmx/7tbawieG7F7Gq/AcY+SOod4qIUfb+1LZ/7UMikzXfbG
 VsSFm1YtxTiHIldPAs+i5MU0OO8TphHpqEtI7kj6eAa3MwYYnhd4DTqI/qahexeU
 3FXnUZg6XhURj1Hp/k4lL+8aoEgQKrjPpSq6oKtbF2rUStwyWbZ2PDYbI19RCU6I
 So58wSQYt0W5CP/dbUDydKorjLirHEvj7ppiGMjwaFjSdipOblrinjLSJ2fVPosF
 EK5lG3AOdf4telYafuq2Ur6EXdGOP1HHdsRhUYBCbZchzGLbH2sGdAs2xHUEsxzV
 80+uE5grX46yAQAj2V8ogpIrP6E4PA4pwEZctsS+4tgUhz9NO7kxFooGmNUk5BkY
 ggtXRlYlmXEz+epoXL7Hr5XkHOObkPk5W/R8JiZqRNv4y3NovYbjqAwYYhPCG60k
 jzwT3BdZJDN28gBU57d60VPEhPQHzpoXc6v3rJ08uFhFms03iz7pj9gCsreF48A9
 jQPZ2nemFt4m4LBsKtihLhvb6t6EllOBkCvbYCD6zgebcjUOscJTq3/TnHrMiNBh
 6wUorR09Bn7iMqhs/rPzUUmwDSN9O78P6uBr/D1E8zA9t/mCPHJHVbUHzrB96UGI
 LA7QA1pWbuYtoVSYa09W
 =0eSL
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-mcu-20190423' of https://github.com/pchotard/u-boot

STM32 MCUs update:
- DT rework and alignment with DT kernel v4.20
- mmc: arm_pl180_mmci: Synchronize compatible with kernel v4.20
- mmc: stm32_sdmmc2: Synchronize properties with kernel v4.20
- configs: update for F746/769 boards
2019-04-24 12:26:39 -04:00
Tom Rini
ceb6ddbc73 - Add support for Amlogic p200 & p201 Reference Designs
- Add Amlogic SoC information display
 - Add support for the Libretech-AC AML-S805X-AC board
 - Add Amlogic AXG reset compatible
 - Add I2C support for Amlogic AXG
 - Fix AXG PIN and BANK pinctrl definitions
 - Fix regmap_read_poll_timeout warning about sandbox_timer_add_offset
 - Add initial support for Amlogic G12A SoC and U200 board
 - Enable PHY_REALTEK for selected boards
 - Fix Khadas VIM2 README
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJcvtmpAAoJEHfc29rIyEnRc78P/0vN7zuxfSganTctZJGyrika
 9i3aIwr03KaFJJKg2FpnjMvdoYfjbuQoJmCdtgyO5Gzw/E5m3b8zbOwxoXW0r8Mg
 56fTSh8my8XHxnrc+Ryv+qwnf8SRIDv7apNqk6vpmnq3OC6di/Z/BBi7jT/ptNm+
 fT/VvQDZkPl5Em3kO1899dpZ7mk5WBwrBeD3R8hrrHtpF45zlRXKPIA/rlcT01DD
 w1gKL7n8NNuV+PHB7fh+xYYW7XkZpINqg6RbEi4w/DpM9Piys4XlB8+W361OkU3O
 Mk0u4omb6ahVIzV7AT4/Xz7B6edO/JpuCkLF0CCIzWo6TBT4Dpkz2h0wVaUCuZBC
 /mykRIgYmFCtdFuUuklf12xKA2VzNfEqk+mzyohDwTxdpWnKZOyX+OfR6Y2PKL8Y
 qSSDYkgucf16SIDBXu8/uVI0RCLtCfza68/Py63Hu9tzFWrG3tC94j3xmXAt+gBA
 Rg25xQ+KfX6oEGbHpViBJDLDWZDzqRPlkAdp3mb08Zpq9cynQSfM5dyS02YnEod7
 80uyva2Bq8S5a2NQYtLJRim54N2rM4srgFFFS0Qw4Feqv7KRkbZl37mTraOLKFo+
 h8t2EQnlaiIzWEKwXmgd7eXS3wV3lsVDn1q/UzBdqkPgp4HQcBsUONh5dxrD5Bvq
 bm6hYo2+hqt583THUltr
 =Qb3V
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20190423' of git://git.denx.de/u-boot-amlogic

- Add support for Amlogic p200 & p201 Reference Designs
- Add Amlogic SoC information display
- Add support for the Libretech-AC AML-S805X-AC board
- Add Amlogic AXG reset compatible
- Add I2C support for Amlogic AXG
- Fix AXG PIN and BANK pinctrl definitions
- Fix regmap_read_poll_timeout warning about sandbox_timer_add_offset
- Add initial support for Amlogic G12A SoC and U200 board
- Enable PHY_REALTEK for selected boards
- Fix Khadas VIM2 README
2019-04-24 12:26:25 -04:00
Fabien Parent
def2fc05f6 ARM: MediaTek: Add support for MT8516 SoC
Add support for MediaTek MT8516 SoC. This include the file
that will initialize the SoC after boot and its device tree.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-04-23 17:57:26 -04:00
Shawn Guo
7c798a11d4 poplar: enable Ethernet driver support
The 'phy' reset of gmac device in kernel device tree is not generic
enough for u-boot to use, so we need to overwrite the 'resets' property
as needed.  With this device tree fixup and poplar_defconfig changes,
Ethernet starts working on Poplar board.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-04-23 17:57:25 -04:00
Philippe Reynes
4ae0542de7 dt: bcm963158: enable led controller
Enable the led controller in the device tree
of the board bcm963158.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-23 17:57:22 -04:00
Philippe Reynes
cfbb03be1c dt: bcm63158: add led controller
Add the led controller in the bcm63158 device tree.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-23 17:57:22 -04:00
Philippe Reynes
9689921921 dt: bcm968580xref: enable led controller
Enable the led controller in the device tree
of the board bcm968580xref.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-23 17:57:14 -04:00
Patrice Chotard
c89b87cbfc ARM: dts: stm32: Update sdmmc binding for stm32mp157c-ed1
Update some sdmmc properties which have been updated with
v4.19 DT bindings:
      - st,dirpol becomes st,sig-dir
      - st,negedge becomes st,neg-edge
      - st,pin-ckin becomes st,use-ckin

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23 15:31:56 +02:00
Patrice Chotard
e4995e61c9 ARM: dts: stm32: Update sdmmc binding for stm32h743i-eval
Update some sdmmc properties which have been updated with
v4.19 DT bindings:
      - st,dirpol becomes st,sig-dir
      - st,negedge becomes st,neg-edge
      - st,pin-ckin becomes st,use-ckin

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23 15:31:52 +02:00
Patrice Chotard
60121266c9 ARM: dts: stm32: Restore old usart1 clock bindings for stm32f7
As U-boot stm32f clock driver doesn't support new
bindings for auxiliary clocks (clocks = <&rcc 1 ....>),
restore old bindings for usart1 to get console output.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23 15:31:21 +02:00
Patrice Chotard
13ba6d0e6f ARM: dts: stm32: Sync DT with v4.20 kernel for stm32h7
Synchronize stm32h7 device tree with kernel v4.20.
U-boot DT files and pinctrl bindings are updated,
useless nodes are removed and gpio compatible added.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23 15:31:17 +02:00
Patrice Chotard
1056303148 ARM: dts: Migrate U-boot nodes to U-boot DT files for stm32h7
In order to prepare and ease future DT synchronization with kernel
DT, migrate all U-boot specific nodes/properties/addons to
U-boot DT files.

As sdmmc is not yet supported on kernel side, sdmmc nodes
are located in eval-u-boot and disco-u-boot DT files.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23 15:31:11 +02:00
Patrice Chotard
fe63d3cfb7 ARM: dts: stm32: Sync DT with v4.20 kernel for stm32f7
Synchronize stm32f7 device tree with kernel v4.20.

All pinctrl bindings are updated.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23 15:31:06 +02:00
Patrice Chotard
01aabf97d1 ARM: dts: stm32: Migrate U-boot nodes to U-boot DT files for stm32f7
In order to prepare and ease future DT synchronization with kernel
DT, migrate all U-boot specific nodes/properties/addons to
U-boot DT files.

Migrate also DT nodes which are not yet available on kernel DT side
as ethernet, ltdc and qspi nodes.

Fix ethernet_mii pins and add missing qspi_pins for stm32746g-eval

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23 15:31:01 +02:00
Patrice Chotard
71dfd5f3f5 ARM: dts: stm32: Sync DT files with v4.20 kernel for stm32f4
Synchronize stm32f7 device tree with kernel v4.20.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23 15:30:57 +02:00
Patrice Chotard
933f84cab9 ARM:dts: stm32: sort nodes by alphabetical order in f4 u-boot files
Sort nodes alphabetically to be coherent with all others STM32 DT files.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23 15:30:52 +02:00
Neil Armstrong
f9e605437e ARM: dts: Import Amlogic G12A u200 DT from Linux 5.1-rc1
Import Linux 5.1-rc1 DT from 9e98c678c2d6 ("Linux 5.1-rc1") for the
meson-g12a-u200 board, the meson-g12a.dtsi and the corresponding bindings.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-04-23 11:19:09 +02:00
Philippe Reynes
7526582441 dt: bcm6858: add led controller
Add the led controller in the bcm6858 device tree.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22 18:13:24 -04:00
Philippe Reynes
b2aa518a62 dt: bcm963158: enable nand controller
Enable the nand controller in the device tree
of the board bcm963158.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22 12:06:39 -04:00
Philippe Reynes
6242e9a82a dt: bcm63158: add nand controller
Add the nand controller in the bcm63158 device tree.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22 12:06:38 -04:00
Philippe Reynes
2463ad34b0 dt: bcm968580xref: enable nand controller
Enable the nand controller in the device tree
of the board bcm968580xref.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22 12:06:38 -04:00
Philippe Reynes
24e27a180a dt: bcm6858: add nand controller
Add the nand controller in the bcm6858 device tree.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22 12:06:30 -04:00
Tom Rini
8a94262435 Second set of u-boot-atmel features and fixes for 2019.07 cycle
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJcvW07AAoJEB6zHgIOrC/Iu4QH/1REDOTrsZPydd2yD/O81vPs
 RiLC8wP2J4UmqtMcNTLyvxlYwrzqoR5J6SYdyBNU/+cLEp/gdzEI+rjsfSV2uRX1
 Qb4Pk2FiI503JVjegxsbJqzASfiEP7rIg3HM5431xbhYH22MW2FH6le6yrtNxjBh
 m1WFjQYX1bpbGb6zue8TgyLIeN1IqWuqnH9kUHixUEan+xrpEhN239LDFjdvGbvC
 BvYyMtDddmMt4YDzNjgX36us993kylGZp6JijR3zgUao7I/JGVZAJrxw8MHDTnVy
 UKv3VI9F5bGLSvzqTVL2MFU6XtJW26v+niGLhGzlUhb3TTKrdKOicm3VF7tO+JU=
 =MamK
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-atmel-2019.07-b' of git://git.denx.de/u-boot-atmel

Second set of u-boot-atmel features and fixes for 2019.07 cycle
2019-04-22 10:28:21 -04:00
Tom Rini
6c5f8dd540 Merge branch 'master' of git://git.denx.de/u-boot-usb
- Various fastboot, dwc2/stm32 updates
2019-04-21 19:00:04 -04:00
Tom Rini
b4fde1633e Merge branch 'master' of git://git.denx.de/u-boot-socfpga
- Various stratix10, gen5 updates
2019-04-21 18:59:30 -04:00
Patrick Delaunay
6fe7dd3327 stm32mp1: add stusb1600 support for DK1 and DK2 board
The DK1 and DK2 boards use the USB Type-C controller STUSB1600.
This patch updates:
- the device tree to add the I2C node in the DT
- the board stm32mp1 to probe this I2C device and use this controller
  to check cable detection.
- the DWC2 driver to support a new dt property
  "u-boot,force-b-session-valid" which forces B session and
  device mode; it is a workaround because the VBUS sensing and
  ID detection isn't available with stusb1600.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-21 10:26:52 +02:00
Patrick Delaunay
c31000c534 stm32mp1: migrate USBOTG device to driver model
Use the DWC2 device driver with DM_USB_GADGET support and
cleanup the USB support in STM32MP1 board.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-21 10:26:52 +02:00
Patrick Delaunay
c50151d43f phy: usbphyc: Binding update of vdda supply
Move supply vdda1v1 and vdda1v8 in usbphyc node and
no more in port

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-21 10:26:51 +02:00
Clément Péron
517ee64205 arm: dts: h6: Add Beelink GS1 initial support
Beelink GS1 is an Allwinner H6 based TV box,
which support:
- Allwinner H6 Quad-core 64-bit ARM Cortex-A53
- GPU Mali-T720
- 2GB LPDDR3 RAM
- 16GB eMMC
- AXP805 PMIC
- 1Gbps GMAC via RTL8211E
- USB 2.0 and 3.0 Host
- HDMI port
- S/PDIF port
- 5V/2A DC power supply
- Wi-Fi/BT via Fn-Link 6222B-SRB (RTL8222BS)

Linux commit details about the sun50i-h6-beelink-gs1.dts sync:
"arm64: dts: allwinner: h6: Introduce Beelink GS1 board"
(sha1: 089bee8dd119ba084dee6b17a2e1a53df4f30193)

Signed-off-by: Clément Péron <peron.clem@gmail.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-18 22:14:34 +05:30
Razvan Stefanescu
fe5963d63e ARM: dts: at91-sama5d2-icp: Add MACB node
MACB has a fixed link connection to KSZ8563 switch port.

Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
2019-04-18 09:43:22 +03:00
Eugen Hristev
f085452d85 board: atmel: add SAMA5D2 ICP board
The SAMA5D2 ICP Board features the SAMA5D27 SoC,
together with QSPI Flash, Wilc3000 wireless device and
EtherCat support.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-04-18 09:43:22 +03:00
Ley Foon Tan
2c494e62c3 arm: dts: Stratix10: Add QSPI node
Merge qspi dts node from Linux.
Commit 0cb140d07fc75fb (arm64: dts: stratix10: Add QSPI support for Stratix10)

Add -u-boot.dtsi files for non Linux dts properties and
update properties for Uboot.
- add u-boot,dm-pre-reloc
- add alias for spi0
- change compatible for flash
- support quad read and quad write
- change maximum frequency to 100MHz

Tested on Stratix 10 SoC devkit.
SOCFPGA_STRATIX10 # sf probe 0:0
SF: Detected mt25qu02g with page size 256 Bytes, erase size 64 KiB, total 256 MiB

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-04-17 22:20:17 +02:00
Ley Foon Tan
62e6278d1e arm: dts: Stratix10: Modify stratix10 socdk memory node
The stratix10 socdk ships with 4GB of memory.  Modify the
device tree to represent this.  Note that to access 4GB of
memory in Stratix 10, due to the IO space from 2GB to 4GB,
we use the fact that the DDR controller ignores upper address
bits outside of the configured DRAM's size.  This means that
, the 4GB DRAM is mapped to memory every 4GB.

For an 8GB memory, you can either live with the 2GB IO space,
and loose access to that memory from the processor, or use
the same trick:

Loose 2GB of memory:
        memory {
                device_type = "memory";
                /* 8GB */
		/* first 2GB */
                reg = <0 0x00000000 0 0x80000000>,
		/* last 4GB */
                      <1 0x00000000 1 0x00000000>;
                u-boot,dm-pre-reloc;
        };

or to map it all:
        memory {
                device_type = "memory";
                /* 8GB */
		/* first 2GB */
                reg = <0 0x00000000 0 0x80000000>,
		/* next 6GB */
                      <2 0x80000000 1 0x80000000>;
                u-boot,dm-pre-reloc;
        };

Signed-off-by: Dalon Westergreen <dalon.westergreen@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-04-17 22:20:17 +02:00
Simon Goldschmidt
29873c74f3 arm: socfpga: move gen5 SDR driver to DM
To clean up reset handling for socfpga gen5, port the DDR driver to DM
using UCLASS_RAM and implement proper reset handling.

This gets us rid of one ad-hoc call to socfpga_per_reset().

The gen5 driver is implemented in 2 distinct files. One of it (containing
the calibration training) is not touched much and is kept at using
hard coded addresses since the code grows even more otherwise.

SPL is changed from calling hard into the DDR driver code to just
probing UCLASS_RESET and UCLASS_RAM. It is happy after finding a RAM
driver after that.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-04-17 22:20:16 +02:00
Simon Goldschmidt
7357c2cbc0 arm: socfpga: gen5: add reset & sdr node to SPL devicetrees
The SPL for socfpga gen5 currently takes all peripherals out of reset
unconditionally. To implement proper reset handling for peripherals,
the reset node has to be provided with the SPL dts.

In preparation to move the DDR driver to DM, the sdr node is required
in SPL, too.

This patch adds "u-boot,dm-pre-reloc" to U-Boot specific dtsi addon
files so that the reset manager and SDR driver correctly probe in SPL.
It centralizes these settings into a common file since in contrast to
boot-type specific nodes, "soc", "rst" and "sdr" are always needed.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-04-17 22:20:16 +02:00
Simon Goldschmidt
42a37d9774 arm: socfpga: gen5: sync devicetrees to Linux
This is again a sync to linux-next + pending patches in Dinh's tree at
commit 1c909b2dfe6a ("ARM: dts: socfpga: update more missing reset
properties")'

It adds missing peripheral reset properties to socfpga.dtsi and removes
U-Boot specific leftovers from socfpga_cyclone5_socrates.dts.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-04-17 22:20:15 +02:00
Uri Mashiach
ecb76eff56 arm: am57xx: cl-som-am57x: remove board support
U-Boot support for the CL-SOM-AM57x module is no longer required.

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
2019-04-17 09:20:26 -04:00
Tom Rini
4b37f36d68 Merge branch 'master' of git://git.denx.de/u-boot-sunxi
- Convert DM_MMC and DM_SCSI
- A20, R40, H6 Linux dts(i) sync
- CLK, RESET support for sunxi, sun8_emac net drivers
2019-04-17 09:19:45 -04:00
Tom Rini
14b8c420b8 Xilinx/FPGA changes for v2019.07
fpga:
 - Add support for external data in FIT
 - Extend testing for external data case
 - Inform user about a need to run post config on Zynq
 
 arm:
 - Tune zynq command functions
 - Fix internal variable setting
 
 arm64:
 - Add support for zc39dr decoding
 - Disable WDT for zcu100
 - Small changes in reset_reason()
 - Some DT changes (spi)
 - Tune qspi-mini configuration
 - Remove useless eeprom setting
 - Fix two sdhci boot case
 
 spi:
 - Fix tap delay programming
 
 clk:
 - Enable i2c in SPL
 
 net:
 - Fix gem phydev handling
 - Remove phy detection code from gem driver
 
 general:
 - Correct EXT_DTB usage for MULTI_DTB_FIT configuration
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAly262oACgkQykllyylKDCH44gCbBnuxUH6ZF0B7Leuee4te7C59
 LmUAn14/bbtMt17zkMSADCjY9yGWF4au
 =mWrW
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2019.07' of git://git.denx.de/u-boot-microblaze

Xilinx/FPGA changes for v2019.07

fpga:
- Add support for external data in FIT
- Extend testing for external data case
- Inform user about a need to run post config on Zynq

arm:
- Tune zynq command functions
- Fix internal variable setting

arm64:
- Add support for zc39dr decoding
- Disable WDT for zcu100
- Small changes in reset_reason()
- Some DT changes (spi)
- Tune qspi-mini configuration
- Remove useless eeprom setting
- Fix two sdhci boot case

spi:
- Fix tap delay programming

clk:
- Enable i2c in SPL

net:
- Fix gem phydev handling
- Remove phy detection code from gem driver

general:
- Correct EXT_DTB usage for MULTI_DTB_FIT configuration
2019-04-17 09:19:13 -04:00
Tom Rini
88d5ab3d67 UniPhier SoC updates for v2019.07
- Sync DT with Linux 5.1-rc4
 
 - Enable CONFIG_SUPPORT_EMMC_RPMB for uniphier_v8_defconfig
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJctlk9AAoJED2LAQed4NsGsBoP/0wXmetq2UKCn+4qWy3+2ItR
 M8hspsdpIclFTcG7D8kxeCWgMv0SH6hFbRgEo8gfnHX/kWCXnklgVc7q2rEWIk53
 0Dze8Zopr0YULhx8Esuq1viS/WVz1qPVK0cnqJc4QgBbXxLWxc9xC1WUV61G0ls2
 3oHGLbEJTtTE2cbEIJaRIu1pfravN4RoJtsiO+Gum1LEtoyQ/h7g/5f/equwJ0q3
 QwbvASuXOyoyhypcjA97PAQZru54e8cqFd1VwRJNJMryjkOOk7Tq+z77WwtFiv7G
 heDy0P0b/ykxoasUMwPOOkC7/uVjeh6lsoOqiJejQan7bcYEWPsWRPflZeFVFTIS
 ptfir+LCNaBdUddVP7IcNaRRrho11zyvhOcHLb+df7dI7UNytux9YA0CIOlgFNmZ
 /lIxKlCfXKEft20XHTxIfSoPPrlmmKzk1zyvv8+rZLsMW0yBIQkLUoXKcZL+dmSG
 3U8DrCNZlc4xHVEh69dntqHZ2+5TtpKV3KEBnEOHAwlqSdP6K0sU0no1hZ4H0gkU
 xylEihbMxwGljIAQt3VBiGb+UDlvZKvADyZDKnRt1OSO65Z3z1Vt2W4ziSrcWCTC
 bloy6jiOxaRkbXeEQSmjKfmOr3DpagyUuESjTKLFhYeFLl9dqMURh4C0FtP3M50d
 R6ivoyBE6BLnK8gOz9JL
 =YEOC
 -----END PGP SIGNATURE-----

Merge tag 'uniphier-v2019.07' of git://git.denx.de/u-boot-uniphier

UniPhier SoC updates for v2019.07

- Sync DT with Linux 5.1-rc4

- Enable CONFIG_SUPPORT_EMMC_RPMB for uniphier_v8_defconfig
2019-04-17 09:16:38 -04:00
Jagan Teki
6c90036f7b ARM: dts: sun8i-r40-bananapi-m2-berry: Enable AHCI
Enable ahci node for BPI-M2-Berry, this would require since
we have DM_SCSI enabled on the respective SoC.

Unable to sync the same node from Linux, since the similar change
is still in Linux ML.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17 14:34:45 +05:30
Jagan Teki
36b53ab24e ARM: dts: a20-wits-pro-a20-dkt: Enable AHCI
Enable ahci node for a20-wits-pro-a20-dkt, this would require since
we have DM_SCSI enabled on the respective SoC.

Right now, ahci enabled in -u-boot.dtsi and will remove once same
supported by Linux.

Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17 14:34:45 +05:30
Jagan Teki
328c5f09c9 ARM: dts: a20-m5: Enable AHCI
Enable ahci node for sun7i-a20-m5.dts, this would require since
we have DM_SCSI enabled on the respective SoC.

No need to send patch to Linux for this change, since this
dts is U-Boot specific.

Cc: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17 14:34:45 +05:30
Jagan Teki
0cc47a8ead arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
Sync sun7i-a20 dts(i) files from Linux 5.1-rc2

Linux commit details about the sun7i-a20* sync:
"ARM: dts: sun7i: bananapi: Add GPIO banks regulators"
(sha1: 09c6572290f018d73ec2e812e28bada34d41815f)

Here are U-Boot specific dts changes.

- s/uart0_pins_a/uart0_pb_pins for
  sun7i-a20-ainol-aw1.dts
  sun7i-a20-m5.dts
  sun7i-a20-primo73.dts
  sun7i-a20-yones-toptech-bd1078.dts
  sunxi-itead-core-common.dtsi
- s/gmac_pins_mii_a/gmac_rgmii_pins for
  sun7i-a20-m5.dts
- drop i2c0, i2c1 pins from
  sunxi-itead-core-common.dtsi
- drop mmc0 pins from
  sun7i-a20-primo73.dts

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17 14:34:45 +05:30
Jagan Teki
3705d4965f arm: allwinner: r40: Sync R40 dts(i) files from Linux 5.1-rc2
Sync sun8i-r40 dts(i) files from Linux 5.1-rc2

Linux commit details about the sun8i-r40* sync:
"ARM: dts: sun8i: r40: bananapi-m2-ultra: Add Bluetooth device node"
(sha1: 1e5f1db4ccd8348a21da55bff82f4263000879ef)

Linux commit details about the sun8i-v40* sync:
"ARM: dts: sunxi: Fix I2C bus warnings"
(sha1: 0729b4af5753b65aa031f58c435da53dbbf56d19)

Cc: Pablo Sebastián Greco <pgreco@centosproject.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17 14:34:45 +05:30
Masahiro Yamada
cd33feda6b ARM: dts: uniphier: sync with Linux 5.1-rc4
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-04-17 07:22:23 +09:00
Siva Durga Prasad Paladugu
3b4146f133 arm64: zynqmp: Define label for flash node
Define a label for flash node so that it can be
referenced easily as required.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16 11:51:34 +02:00
Siva Durga Prasad Paladugu
8bc8991f22 arm64: zynqmp: Add spi-flash compatible string to flash node
spi-flash compatible string is needed for reading tx and rx bus
widths, hence add this compatible string to flash node.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16 11:51:34 +02:00