brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-06-09 23:36:03 +09:00
Code Issues Projects Releases Wiki Activity

arm: allwinner: r40: Sync R40 dts(i) files from Linux 5.1-rc2

Browse Source 
Sync sun8i-r40 dts(i) files from Linux 5.1-rc2

Linux commit details about the sun8i-r40* sync:
"ARM: dts: sun8i: r40: bananapi-m2-ultra: Add Bluetooth device node"
(sha1: 1e5f1db4ccd8348a21da55bff82f4263000879ef)

Linux commit details about the sun8i-v40* sync:
"ARM: dts: sunxi: Fix I2C bus warnings"
(sha1: 0729b4af5753b65aa031f58c435da53dbbf56d19)

Cc: Pablo Sebastián Greco <pgreco@centosproject.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
This commit is contained in:
Jagan Teki 2019-04-09 15:08:51 +05:30
parent 99a8a3114f
commit 3705d4965f
3 changed files with 449 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

91
arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts
View File

@ -59,6 +59,17 @@
stdout-path = "serial0:115200n8";
};
connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
@ -91,9 +102,21 @@
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
clocks = <&ccu CLK_OUTA>;
clock-names = "ext_clock";
};
};
&ahci {
ahci-supply = <&reg_dldo4>;
phy-supply = <&reg_eldo3>;
status = "okay";
};
&de {
status = "okay";
};
&ehci1 {
status = "okay";
};
@ -118,6 +141,16 @@
};
};
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&i2c0 {
status = "okay";
@ -134,8 +167,7 @@
&mmc0 {
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
cd-inverted;
cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */
status = "okay";
};
@ -166,6 +198,11 @@
status = "okay";
};
&pio {
pinctrl-names = "default";
pinctrl-0 = <&clk_out_a_pin>;
};
&reg_aldo2 {
regulator-always-on;
regulator-min-microvolt = <2500000>;
@ -220,18 +257,68 @@
regulator-name = "vcc-wifi-io";
};
/*
* Our WiFi chip needs both DLDO2 and DLDO3 to be powered at the same
* time, with the two being in sync, to be able to meet maximum power
* consumption during transmits. Since this is not really supported
* right now, just use the two as always on, and we will fix it later.
*/
&reg_dldo2 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi";
};
&reg_dldo3 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi-2";
};
&reg_dldo4 {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-name = "vdd2v5-sata";
};
&reg_eldo3 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vdd1v2-sata";
};
&tcon_tv0 {
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>;
uart-has-rtscts;
status = "okay";
bluetooth {
compatible = "brcm,bcm43438-bt";
clocks = <&ccu CLK_OUTA>;
clock-names = "lpo";
vbat-supply = <&reg_dldo2>;
vddio-supply = <&reg_dldo1>;
device-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
/* TODO host wake line connected to PMIC GPIO pins */
shutdown-gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
max-speed = <1500000>;
};
};
&usbphy {
usb1_vbus-supply = <&reg_vcc5v0>;
usb2_vbus-supply = <&reg_vcc5v0>;

364
arch/arm/dts/sun8i-r40.dtsi
View File

@ -42,8 +42,10 @@
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun8i-de2.h>
#include <dt-bindings/clock/sun8i-r40-ccu.h>
#include <dt-bindings/reset/sun8i-r40-ccu.h>
#include <dt-bindings/reset/sun8i-de2.h>
/ {
#address-cells = <1>;
@ -59,6 +61,7 @@
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-accuracy = <50000>;
clock-output-names = "osc24M";
};
@ -66,7 +69,8 @@
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "osc32k";
clock-accuracy = <20000>;
clock-output-names = "ext-osc32k";
};
};
@ -99,12 +103,75 @@
};
};
de: display-engine {
compatible = "allwinner,sun8i-r40-display-engine";
allwinner,pipelines = <&mixer0>, <&mixer1>;
status = "disabled";
};
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
display_clocks: clock@1000000 {
compatible = "allwinner,sun8i-r40-de2-clk",
"allwinner,sun8i-h3-de2-clk";
reg = <0x01000000 0x100000>;
clocks = <&ccu CLK_DE>,
<&ccu CLK_BUS_DE>;
clock-names = "mod",
"bus";
resets = <&ccu RST_BUS_DE>;
#clock-cells = <1>;
#reset-cells = <1>;
};
mixer0: mixer@1100000 {
compatible = "allwinner,sun8i-r40-de2-mixer-0";
reg = <0x01100000 0x100000>;
clocks = <&display_clocks CLK_BUS_MIXER0>,
<&display_clocks CLK_MIXER0>;
clock-names = "bus",
"mod";
resets = <&display_clocks RST_MIXER0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
mixer0_out: port@1 {
reg = <1>;
mixer0_out_tcon_top: endpoint {
remote-endpoint = <&tcon_top_mixer0_in_mixer0>;
};
};
};
};
mixer1: mixer@1200000 {
compatible = "allwinner,sun8i-r40-de2-mixer-1";
reg = <0x01200000 0x100000>;
clocks = <&display_clocks CLK_BUS_MIXER1>,
<&display_clocks CLK_MIXER1>;
clock-names = "bus",
"mod";
resets = <&display_clocks RST_WB>;
ports {
#address-cells = <1>;
#size-cells = <0>;
mixer1_out: port@1 {
reg = <1>;
mixer1_out_tcon_top: endpoint {
remote-endpoint = <&tcon_top_mixer1_in_mixer1>;
};
};
};
};
nmi_intc: interrupt-controller@1c00030 {
compatible = "allwinner,sun7i-a20-sc-nmi";
interrupt-controller;
@ -248,23 +315,38 @@
ccu: clock@1c20000 {
compatible = "allwinner,sun8i-r40-ccu";
reg = <0x01c20000 0x400>;
clocks = <&osc24M>, <&osc32k>;
clocks = <&osc24M>, <&rtc 0>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
};
rtc: rtc@1c20400 {
compatible = "allwinner,sun8i-r40-rtc",
"allwinner,sun8i-h3-rtc";
reg = <0x01c20400 0x400>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clock-output-names = "osc32k", "osc32k-out";
clocks = <&osc32k>;
#clock-cells = <1>;
};
pio: pinctrl@1c20800 {
compatible = "allwinner,sun8i-r40-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
#interrupt-cells = <3>;
#gpio-cells = <3>;
clk_out_a_pin: clk-out-a-pin {
pins = "PI12";
function = "clk_out_a";
};
gmac_rgmii_pins: gmac-rgmii-pins {
pins = "PA0", "PA1", "PA2", "PA3",
"PA4", "PA5", "PA6", "PA7",
@ -312,6 +394,16 @@
pins = "PB22", "PB23";
function = "uart0";
};
uart3_pg_pins: uart3-pg-pins {
pins = "PG6", "PG7";
function = "uart3";
};
uart3_rts_cts_pg_pins: uart3-rts-cts-pg-pins {
pins = "PG8", "PG9";
function = "uart3";
};
};
wdt: watchdog@1c20c90 {
@ -464,6 +556,19 @@
#size-cells = <0>;
};
ahci: sata@1c18000 {
compatible = "allwinner,sun8i-r40-ahci";
reg = <0x01c18000 0x1000>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>;
resets = <&ccu RST_BUS_SATA>;
resets-name = "ahci";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
gmac: ethernet@1c50000 {
compatible = "allwinner,sun8i-r40-gmac";
syscon = <&ccu>;
@ -474,8 +579,6 @@
reset-names = "stmmaceth";
clocks = <&ccu CLK_BUS_GMAC>;
clock-names = "stmmaceth";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
gmac_mdio: mdio {
@ -485,6 +588,213 @@
};
};
tcon_top: tcon-top@1c70000 {
compatible = "allwinner,sun8i-r40-tcon-top";
reg = <0x01c70000 0x1000>;
clocks = <&ccu CLK_BUS_TCON_TOP>,
<&ccu CLK_TCON_TV0>,
<&ccu CLK_TVE0>,
<&ccu CLK_TCON_TV1>,
<&ccu CLK_TVE1>,
<&ccu CLK_DSI_DPHY>;
clock-names = "bus",
"tcon-tv0",
"tve0",
"tcon-tv1",
"tve1",
"dsi";
clock-output-names = "tcon-top-tv0",
"tcon-top-tv1",
"tcon-top-dsi";
resets = <&ccu RST_BUS_TCON_TOP>;
#clock-cells = <1>;
ports {
#address-cells = <1>;
#size-cells = <0>;
tcon_top_mixer0_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
tcon_top_mixer0_in_mixer0: endpoint@0 {
reg = <0>;
remote-endpoint = <&mixer0_out_tcon_top>;
};
};
tcon_top_mixer0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
tcon_top_mixer0_out_tcon_lcd0: endpoint@0 {
reg = <0>;
};
tcon_top_mixer0_out_tcon_lcd1: endpoint@1 {
reg = <1>;
};
tcon_top_mixer0_out_tcon_tv0: endpoint@2 {
reg = <2>;
remote-endpoint = <&tcon_tv0_in_tcon_top_mixer0>;
};
tcon_top_mixer0_out_tcon_tv1: endpoint@3 {
reg = <3>;
remote-endpoint = <&tcon_tv1_in_tcon_top_mixer0>;
};
};
tcon_top_mixer1_in: port@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
tcon_top_mixer1_in_mixer1: endpoint@1 {
reg = <1>;
remote-endpoint = <&mixer1_out_tcon_top>;
};
};
tcon_top_mixer1_out: port@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
tcon_top_mixer1_out_tcon_lcd0: endpoint@0 {
reg = <0>;
};
tcon_top_mixer1_out_tcon_lcd1: endpoint@1 {
reg = <1>;
};
tcon_top_mixer1_out_tcon_tv0: endpoint@2 {
reg = <2>;
remote-endpoint = <&tcon_tv0_in_tcon_top_mixer1>;
};
tcon_top_mixer1_out_tcon_tv1: endpoint@3 {
reg = <3>;
remote-endpoint = <&tcon_tv1_in_tcon_top_mixer1>;
};
};
tcon_top_hdmi_in: port@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
tcon_top_hdmi_in_tcon_tv0: endpoint@0 {
reg = <0>;
remote-endpoint = <&tcon_tv0_out_tcon_top>;
};
tcon_top_hdmi_in_tcon_tv1: endpoint@1 {
reg = <1>;
remote-endpoint = <&tcon_tv1_out_tcon_top>;
};
};
tcon_top_hdmi_out: port@5 {
reg = <5>;
tcon_top_hdmi_out_hdmi: endpoint {
remote-endpoint = <&hdmi_in_tcon_top>;
};
};
};
};
tcon_tv0: lcd-controller@1c73000 {
compatible = "allwinner,sun8i-r40-tcon-tv";
reg = <0x01c73000 0x1000>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top 0>;
clock-names = "ahb", "tcon-ch1";
resets = <&ccu RST_BUS_TCON_TV0>;
reset-names = "lcd";
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
tcon_tv0_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
tcon_tv0_in_tcon_top_mixer0: endpoint@0 {
reg = <0>;
remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>;
};
tcon_tv0_in_tcon_top_mixer1: endpoint@1 {
reg = <1>;
remote-endpoint = <&tcon_top_mixer1_out_tcon_tv0>;
};
};
tcon_tv0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
tcon_tv0_out_tcon_top: endpoint@1 {
reg = <1>;
remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>;
};
};
};
};
tcon_tv1: lcd-controller@1c74000 {
compatible = "allwinner,sun8i-r40-tcon-tv";
reg = <0x01c74000 0x1000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top 1>;
clock-names = "ahb", "tcon-ch1";
resets = <&ccu RST_BUS_TCON_TV1>;
reset-names = "lcd";
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
tcon_tv1_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
tcon_tv1_in_tcon_top_mixer0: endpoint@0 {
reg = <0>;
remote-endpoint = <&tcon_top_mixer0_out_tcon_tv1>;
};
tcon_tv1_in_tcon_top_mixer1: endpoint@1 {
reg = <1>;
remote-endpoint = <&tcon_top_mixer1_out_tcon_tv1>;
};
};
tcon_tv1_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
tcon_tv1_out_tcon_top: endpoint@1 {
reg = <1>;
remote-endpoint = <&tcon_top_hdmi_in_tcon_tv1>;
};
};
};
};
gic: interrupt-controller@1c81000 {
compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
@ -495,6 +805,50 @@
#interrupt-cells = <3>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
hdmi: hdmi@1ee0000 {
compatible = "allwinner,sun8i-r40-dw-hdmi",
"allwinner,sun8i-a83t-dw-hdmi";
reg = <0x01ee0000 0x10000>;
reg-io-width = <1>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>,
<&ccu CLK_HDMI>;
clock-names = "iahb", "isfr", "tmds";
resets = <&ccu RST_BUS_HDMI1>;
reset-names = "ctrl";
phys = <&hdmi_phy>;
phy-names = "hdmi-phy";
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
hdmi_in: port@0 {
reg = <0>;
hdmi_in_tcon_top: endpoint {
remote-endpoint = <&tcon_top_hdmi_out_hdmi>;
};
};
hdmi_out: port@1 {
reg = <1>;
};
};
};
hdmi_phy: hdmi-phy@1ef0000 {
compatible = "allwinner,sun8i-r40-hdmi-phy";
reg = <0x01ef0000 0x10000>;
clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>,
<&ccu 7>, <&ccu 16>;
clock-names = "bus", "mod", "pll-0", "pll-1";
resets = <&ccu RST_BUS_HDMI0>;
reset-names = "phy";
#phy-cells = <0>;
};
};
timer {

2
arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts
View File

@ -95,7 +95,7 @@
&i2c0 {
status = "okay";
axp22x: pmic@68 {
axp22x: pmic@34 {
compatible = "x-powers,axp221";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;