mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-06-09 23:36:03 +09:00
ARM: dts: Import SEI610 DT from Linux 5.4-rc2
Import the Amlogic SM1 DT and the SEI610 board DT from [1] [1] da0c9ea146cb ("Linux 5.4-rc2") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
This commit is contained in:
parent
2168a52e2b
commit
5be4afe15f
|
@ -142,7 +142,8 @@ dtb-$(CONFIG_ARCH_MESON) += \
|
|||
meson-g12a-u200.dtb \
|
||||
meson-g12a-sei510.dtb \
|
||||
meson-g12b-odroid-n2.dtb \
|
||||
meson-g12b-a311d-khadas-vim3.dtb
|
||||
meson-g12b-a311d-khadas-vim3.dtb \
|
||||
meson-sm1-sei610.dtb
|
||||
dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
|
||||
tegra20-medcom-wide.dtb \
|
||||
tegra20-paz00.dtb \
|
||||
|
|
383
arch/arm/dts/meson-sm1-sei610.dts
Normal file
383
arch/arm/dts/meson-sm1-sei610.dts
Normal file
|
@ -0,0 +1,383 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2019 BayLibre SAS. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "meson-sm1.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/meson-g12a-gpio.h>
|
||||
|
||||
/ {
|
||||
compatible = "seirobotics,sei610", "amlogic,sm1";
|
||||
model = "SEI Robotics SEI610";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart_AO;
|
||||
ethernet0 = ðmac;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
emmc_pwrseq: emmc-pwrseq {
|
||||
compatible = "mmc-pwrseq-emmc";
|
||||
reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys-polled";
|
||||
poll-interval = <100>;
|
||||
|
||||
key1 {
|
||||
label = "A";
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&gpio GPIOH_6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
key2 {
|
||||
label = "B";
|
||||
linux,code = <BTN_1>;
|
||||
gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
key3 {
|
||||
label = "C";
|
||||
linux,code = <BTN_2>;
|
||||
gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
hdmi-connector {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_connector_in: endpoint {
|
||||
remote-endpoint = <&hdmi_tx_tmds_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
bluetooth {
|
||||
label = "sei610:blue:bt";
|
||||
gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
pwmleds {
|
||||
compatible = "pwm-leds";
|
||||
|
||||
power {
|
||||
label = "sei610:red:power";
|
||||
pwms = <&pwm_AO_ab 0 30518 0>;
|
||||
max-brightness = <255>;
|
||||
linux,default-trigger = "default-on";
|
||||
active-low;
|
||||
};
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x40000000>;
|
||||
};
|
||||
|
||||
ao_5v: regulator-ao_5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "AO_5V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&dc_in>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
dc_in: regulator-dc_in {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "DC_IN";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
emmc_1v8: regulator-emmc_1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "EMMC_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vddao_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddao_3v3: regulator-vddao_3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDAO_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&dc_in>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
/* Used by Tuner, RGB Led & IR Emitter LED array */
|
||||
vddao_3v3_t: regulator-vddao_3v3_t {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDAO_3V3_T";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vddao_3v3>;
|
||||
gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
|
||||
enable-active-low;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddcpu: regulator-vddcpu {
|
||||
/*
|
||||
* SY8120B1ABC DC/DC Regulator.
|
||||
*/
|
||||
compatible = "pwm-regulator";
|
||||
|
||||
regulator-name = "VDDCPU";
|
||||
regulator-min-microvolt = <690000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
|
||||
vin-supply = <&dc_in>;
|
||||
|
||||
pwms = <&pwm_AO_cd 1 1500 0>;
|
||||
pwm-dutycycle-range = <100 0>;
|
||||
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddio_ao1v8: regulator-vddio_ao1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDIO_AO1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vddao_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
/* TEE Reserved Memory */
|
||||
bl32_reserved: bl32@5000000 {
|
||||
reg = <0x0 0x05300000 0x0 0x2000000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
|
||||
clocks = <&wifi32k>;
|
||||
clock-names = "ext_clock";
|
||||
};
|
||||
|
||||
wifi32k: wifi32k {
|
||||
compatible = "pwm-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
|
||||
};
|
||||
};
|
||||
|
||||
&cec_AO {
|
||||
pinctrl-0 = <&cec_ao_a_h_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "disabled";
|
||||
hdmi-phandle = <&hdmi_tx>;
|
||||
};
|
||||
|
||||
&cecb_AO {
|
||||
pinctrl-0 = <&cec_ao_b_h_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
hdmi-phandle = <&hdmi_tx>;
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vddcpu>;
|
||||
operating-points-v2 = <&cpu_opp_table>;
|
||||
clocks = <&clkc CLKID_CPU_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vddcpu>;
|
||||
operating-points-v2 = <&cpu_opp_table>;
|
||||
clocks = <&clkc CLKID_CPU1_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vddcpu>;
|
||||
operating-points-v2 = <&cpu_opp_table>;
|
||||
clocks = <&clkc CLKID_CPU2_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vddcpu>;
|
||||
operating-points-v2 = <&cpu_opp_table>;
|
||||
clocks = <&clkc CLKID_CPU3_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
ðmac {
|
||||
status = "okay";
|
||||
phy-handle = <&internal_ephy>;
|
||||
phy-mode = "rmii";
|
||||
};
|
||||
|
||||
&hdmi_tx {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&hdmi_tx_tmds_port {
|
||||
hdmi_tx_tmds_out: endpoint {
|
||||
remote-endpoint = <&hdmi_connector_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&ir {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&remote_input_ao_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&pwm_AO_ab {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pwm_ao_a_pins>;
|
||||
pinctrl-names = "default";
|
||||
clocks = <&xtal>;
|
||||
clock-names = "clkin0";
|
||||
};
|
||||
|
||||
&pwm_AO_cd {
|
||||
pinctrl-0 = <&pwm_ao_d_e_pins>;
|
||||
pinctrl-names = "default";
|
||||
clocks = <&xtal>;
|
||||
clock-names = "clkin1";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm_ef {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pwm_e_pins>;
|
||||
pinctrl-names = "default";
|
||||
clocks = <&xtal>;
|
||||
clock-names = "clkin0";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
vref-supply = <&vddio_ao1v8>;
|
||||
};
|
||||
|
||||
/* SDIO */
|
||||
&sd_emmc_a {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdio_pins>;
|
||||
pinctrl-1 = <&sdio_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
sd-uhs-sdr50;
|
||||
max-frequency = <100000000>;
|
||||
|
||||
non-removable;
|
||||
disable-wp;
|
||||
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
|
||||
vmmc-supply = <&vddao_3v3>;
|
||||
vqmmc-supply = <&vddio_ao1v8>;
|
||||
|
||||
brcmf: wifi@1 {
|
||||
reg = <1>;
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
};
|
||||
};
|
||||
|
||||
/* SD card */
|
||||
&sd_emmc_b {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdcard_c_pins>;
|
||||
pinctrl-1 = <&sdcard_clk_gate_c_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <50000000>;
|
||||
disable-wp;
|
||||
|
||||
cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
|
||||
vmmc-supply = <&vddao_3v3>;
|
||||
vqmmc-supply = <&vddao_3v3>;
|
||||
};
|
||||
|
||||
/* eMMC */
|
||||
&sd_emmc_c {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
max-frequency = <200000000>;
|
||||
non-removable;
|
||||
disable-wp;
|
||||
|
||||
mmc-pwrseq = <&emmc_pwrseq>;
|
||||
vmmc-supply = <&vddao_3v3>;
|
||||
vqmmc-supply = <&emmc_1v8>;
|
||||
};
|
||||
|
||||
&uart_A {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
|
||||
pinctrl-names = "default";
|
||||
uart-has-rtscts;
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43438-bt";
|
||||
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
|
||||
max-speed = <2000000>;
|
||||
clocks = <&wifi32k>;
|
||||
clock-names = "lpo";
|
||||
vbat-supply = <&vddao_3v3>;
|
||||
vddio-supply = <&vddio_ao1v8>;
|
||||
};
|
||||
};
|
||||
|
||||
/* Exposed via the on-board USB to Serial FT232RL IC */
|
||||
&uart_AO {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_ao_a_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
dr_mode = "otg";
|
||||
};
|
147
arch/arm/dts/meson-sm1.dtsi
Normal file
147
arch/arm/dts/meson-sm1.dtsi
Normal file
|
@ -0,0 +1,147 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2019 BayLibre, SAS
|
||||
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
||||
*/
|
||||
|
||||
#include "meson-g12-common.dtsi"
|
||||
#include <dt-bindings/power/meson-sm1-power.h>
|
||||
|
||||
/ {
|
||||
compatible = "amlogic,sm1";
|
||||
|
||||
cpus {
|
||||
#address-cells = <0x2>;
|
||||
#size-cells = <0x0>;
|
||||
|
||||
cpu0: cpu@0 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a55";
|
||||
reg = <0x0 0x0>;
|
||||
enable-method = "psci";
|
||||
next-level-cache = <&l2>;
|
||||
};
|
||||
|
||||
cpu1: cpu@1 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a55";
|
||||
reg = <0x0 0x1>;
|
||||
enable-method = "psci";
|
||||
next-level-cache = <&l2>;
|
||||
};
|
||||
|
||||
cpu2: cpu@2 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a55";
|
||||
reg = <0x0 0x2>;
|
||||
enable-method = "psci";
|
||||
next-level-cache = <&l2>;
|
||||
};
|
||||
|
||||
cpu3: cpu@3 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a55";
|
||||
reg = <0x0 0x3>;
|
||||
enable-method = "psci";
|
||||
next-level-cache = <&l2>;
|
||||
};
|
||||
|
||||
l2: l2-cache0 {
|
||||
compatible = "cache";
|
||||
};
|
||||
};
|
||||
|
||||
cpu_opp_table: opp-table {
|
||||
compatible = "operating-points-v2";
|
||||
opp-shared;
|
||||
|
||||
opp-100000000 {
|
||||
opp-hz = /bits/ 64 <100000000>;
|
||||
opp-microvolt = <730000>;
|
||||
};
|
||||
|
||||
opp-250000000 {
|
||||
opp-hz = /bits/ 64 <250000000>;
|
||||
opp-microvolt = <730000>;
|
||||
};
|
||||
|
||||
opp-500000000 {
|
||||
opp-hz = /bits/ 64 <500000000>;
|
||||
opp-microvolt = <730000>;
|
||||
};
|
||||
|
||||
opp-667000000 {
|
||||
opp-hz = /bits/ 64 <666666666>;
|
||||
opp-microvolt = <750000>;
|
||||
};
|
||||
|
||||
opp-1000000000 {
|
||||
opp-hz = /bits/ 64 <1000000000>;
|
||||
opp-microvolt = <770000>;
|
||||
};
|
||||
|
||||
opp-1200000000 {
|
||||
opp-hz = /bits/ 64 <1200000000>;
|
||||
opp-microvolt = <780000>;
|
||||
};
|
||||
|
||||
opp-1404000000 {
|
||||
opp-hz = /bits/ 64 <1404000000>;
|
||||
opp-microvolt = <790000>;
|
||||
};
|
||||
|
||||
opp-1512000000 {
|
||||
opp-hz = /bits/ 64 <1500000000>;
|
||||
opp-microvolt = <800000>;
|
||||
};
|
||||
|
||||
opp-1608000000 {
|
||||
opp-hz = /bits/ 64 <1608000000>;
|
||||
opp-microvolt = <810000>;
|
||||
};
|
||||
|
||||
opp-1704000000 {
|
||||
opp-hz = /bits/ 64 <1704000000>;
|
||||
opp-microvolt = <850000>;
|
||||
};
|
||||
|
||||
opp-1800000000 {
|
||||
opp-hz = /bits/ 64 <1800000000>;
|
||||
opp-microvolt = <900000>;
|
||||
};
|
||||
|
||||
opp-1908000000 {
|
||||
opp-hz = /bits/ 64 <1908000000>;
|
||||
opp-microvolt = <950000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cecb_AO {
|
||||
compatible = "amlogic,meson-sm1-ao-cec";
|
||||
};
|
||||
|
||||
&clk_msr {
|
||||
compatible = "amlogic,meson-sm1-clk-measure";
|
||||
};
|
||||
|
||||
|
||||
&clkc {
|
||||
compatible = "amlogic,sm1-clkc";
|
||||
};
|
||||
|
||||
ðmac {
|
||||
power-domains = <&pwrc PWRC_SM1_ETH_ID>;
|
||||
};
|
||||
|
||||
&pwrc {
|
||||
compatible = "amlogic,meson-sm1-pwrc";
|
||||
};
|
||||
|
||||
&vpu {
|
||||
power-domains = <&pwrc PWRC_SM1_VPU_ID>;
|
||||
};
|
||||
|
||||
&usb {
|
||||
power-domains = <&pwrc PWRC_SM1_USB_ID>;
|
||||
};
|
18
include/dt-bindings/power/meson-sm1-power.h
Normal file
18
include/dt-bindings/power/meson-sm1-power.h
Normal file
|
@ -0,0 +1,18 @@
|
|||
/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
|
||||
/*
|
||||
* Copyright (c) 2019 BayLibre, SAS
|
||||
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
||||
*/
|
||||
|
||||
#ifndef _DT_BINDINGS_MESON_SM1_POWER_H
|
||||
#define _DT_BINDINGS_MESON_SM1_POWER_H
|
||||
|
||||
#define PWRC_SM1_VPU_ID 0
|
||||
#define PWRC_SM1_NNA_ID 1
|
||||
#define PWRC_SM1_USB_ID 2
|
||||
#define PWRC_SM1_PCIE_ID 3
|
||||
#define PWRC_SM1_GE2D_ID 4
|
||||
#define PWRC_SM1_AUDIO_ID 5
|
||||
#define PWRC_SM1_ETH_ID 6
|
||||
|
||||
#endif
|
Loading…
Reference in New Issue
Block a user