mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-06-09 23:36:03 +09:00
arm: dts: ti: Add Support for J721E SoC
Add initial SoC definition for J721E SoC. Kernel dts posted here: https://lore.kernel.org/lkml/20190522161921.20750-1-nm@ti.com/ Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
This commit is contained in:
Lokesh Vutla
Tom Rini
parent
382f1dda97
commit
eeb2e8b6eb
231
arch/arm/dts/k3-j721e-main.dtsi
Normal file
231
arch/arm/dts/k3-j721e-main.dtsi
Normal file
|
|
@ -0,0 +1,231 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for J721E SoC Family Main Domain peripherals
|
||||
*
|
||||
* Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*/
|
||||
|
||||
&cbass_main {
|
||||
msmc_ram: sram@70000000 {
|
||||
compatible = "mmio-sram";
|
||||
reg = <0x0 0x70000000 0x0 0x800000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x0 0x0 0x70000000 0x800000>;
|
||||
|
||||
atf-sram@0 {
|
||||
reg = <0x0 0x20000>;
|
||||
};
|
||||
};
|
||||
|
||||
gic500: interrupt-controller@1800000 {
|
||||
compatible = "arm,gic-v3";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
#interrupt-cells = <3>;
|
||||
interrupt-controller;
|
||||
reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */
|
||||
<0x00 0x01900000 0x00 0x100000>; /* GICR */
|
||||
|
||||
/* vcpumntirq: virtual CPU interface maintenance interrupt */
|
||||
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
gic_its: gic-its@18200000 {
|
||||
compatible = "arm,gic-v3-its";
|
||||
reg = <0x00 0x01820000 0x00 0x10000>;
|
||||
socionext,synquacer-pre-its = <0x1000000 0x400000>;
|
||||
msi-controller;
|
||||
#msi-cells = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
smmu0: smmu@36600000 {
|
||||
compatible = "arm,smmu-v3";
|
||||
reg = <0x0 0x36600000 0x0 0x100000>;
|
||||
interrupt-parent = <&gic500>;
|
||||
interrupts = <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>,
|
||||
<GIC_SPI 768 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-names = "eventq", "gerror";
|
||||
#iommu-cells = <1>;
|
||||
};
|
||||
|
||||
secure_proxy_main: mailbox@32c00000 {
|
||||
compatible = "ti,am654-secure-proxy";
|
||||
#mbox-cells = <1>;
|
||||
reg-names = "target_data", "rt", "scfg";
|
||||
reg = <0x00 0x32c00000 0x00 0x100000>,
|
||||
<0x00 0x32400000 0x00 0x100000>,
|
||||
<0x00 0x32800000 0x00 0x100000>;
|
||||
interrupt-names = "rx_011";
|
||||
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
|
||||
main_pmx0: pinmux@11c000 {
|
||||
compatible = "pinctrl-single";
|
||||
/* Proxy 0 addressing */
|
||||
reg = <0x0 0x11c000 0x0 0x2b4>;
|
||||
#pinctrl-cells = <1>;
|
||||
pinctrl-single,register-width = <32>;
|
||||
pinctrl-single,function-mask = <0xffffffff>;
|
||||
};
|
||||
|
||||
main_uart0: serial@2800000 {
|
||||
compatible = "ti,j721e-uart", "ti,am654-uart";
|
||||
reg = <0x00 0x02800000 0x00 0x100>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <48000000>;
|
||||
current-speed = <115200>;
|
||||
power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&k3_clks 146 0>;
|
||||
clock-names = "fclk";
|
||||
};
|
||||
|
||||
main_uart1: serial@2810000 {
|
||||
compatible = "ti,j721e-uart", "ti,am654-uart";
|
||||
reg = <0x00 0x02810000 0x00 0x100>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <48000000>;
|
||||
current-speed = <115200>;
|
||||
power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&k3_clks 278 0>;
|
||||
clock-names = "fclk";
|
||||
};
|
||||
|
||||
main_uart2: serial@2820000 {
|
||||
compatible = "ti,j721e-uart", "ti,am654-uart";
|
||||
reg = <0x00 0x02820000 0x00 0x100>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <48000000>;
|
||||
current-speed = <115200>;
|
||||
power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&k3_clks 279 0>;
|
||||
clock-names = "fclk";
|
||||
};
|
||||
|
||||
main_uart3: serial@2830000 {
|
||||
compatible = "ti,j721e-uart", "ti,am654-uart";
|
||||
reg = <0x00 0x02830000 0x00 0x100>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <48000000>;
|
||||
current-speed = <115200>;
|
||||
power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&k3_clks 280 0>;
|
||||
clock-names = "fclk";
|
||||
};
|
||||
|
||||
main_uart4: serial@2840000 {
|
||||
compatible = "ti,j721e-uart", "ti,am654-uart";
|
||||
reg = <0x00 0x02840000 0x00 0x100>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <48000000>;
|
||||
current-speed = <115200>;
|
||||
power-domains = <&k3_pds 281 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&k3_clks 281 0>;
|
||||
clock-names = "fclk";
|
||||
};
|
||||
|
||||
main_uart5: serial@2850000 {
|
||||
compatible = "ti,j721e-uart", "ti,am654-uart";
|
||||
reg = <0x00 0x02850000 0x00 0x100>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <48000000>;
|
||||
current-speed = <115200>;
|
||||
power-domains = <&k3_pds 282 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&k3_clks 282 0>;
|
||||
clock-names = "fclk";
|
||||
};
|
||||
|
||||
main_uart6: serial@2860000 {
|
||||
compatible = "ti,j721e-uart", "ti,am654-uart";
|
||||
reg = <0x00 0x02860000 0x00 0x100>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <48000000>;
|
||||
current-speed = <115200>;
|
||||
power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&k3_clks 283 0>;
|
||||
clock-names = "fclk";
|
||||
};
|
||||
|
||||
main_uart7: serial@2870000 {
|
||||
compatible = "ti,j721e-uart", "ti,am654-uart";
|
||||
reg = <0x00 0x02870000 0x00 0x100>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <48000000>;
|
||||
current-speed = <115200>;
|
||||
power-domains = <&k3_pds 284 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&k3_clks 284 0>;
|
||||
clock-names = "fclk";
|
||||
};
|
||||
|
||||
main_uart8: serial@2880000 {
|
||||
compatible = "ti,j721e-uart", "ti,am654-uart";
|
||||
reg = <0x00 0x02880000 0x00 0x100>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <48000000>;
|
||||
current-speed = <115200>;
|
||||
power-domains = <&k3_pds 285 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&k3_clks 285 0>;
|
||||
clock-names = "fclk";
|
||||
};
|
||||
|
||||
main_uart9: serial@2890000 {
|
||||
compatible = "ti,j721e-uart", "ti,am654-uart";
|
||||
reg = <0x00 0x02890000 0x00 0x100>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <48000000>;
|
||||
current-speed = <115200>;
|
||||
power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&k3_clks 286 0>;
|
||||
clock-names = "fclk";
|
||||
};
|
||||
|
||||
main_sdhci0: sdhci@4f80000 {
|
||||
compatible = "ti,j721e-sdhci-8bit";
|
||||
reg = <0x0 0x4f80000 0x0 0x1000>, <0x0 0x4f88000 0x0 0x400>;
|
||||
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
|
||||
power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>;
|
||||
clock-names = "clk_xin", "clk_ahb";
|
||||
clocks = <&k3_clks 91 1>, <&k3_clks 91 0>;
|
||||
assigned-clocks = <&k3_clks 91 1>;
|
||||
assigned-clock-parents = <&k3_clks 91 2>;
|
||||
bus-width = <8>;
|
||||
ti,otap-del-sel = <0x2>;
|
||||
ti,trm-icp = <0x8>;
|
||||
dma-coherent;
|
||||
};
|
||||
|
||||
main_sdhci1: sdhci@4fb0000 {
|
||||
compatible = "ti,j721e-sdhci-4bit";
|
||||
reg = <0x0 0x04fb0000 0x0 0x1000>, <0x0 0x4fb8000 0x0 0x400>;
|
||||
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
||||
power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>;
|
||||
clock-names = "clk_xin", "clk_ahb";
|
||||
clocks = <&k3_clks 92 0>, <&k3_clks 92 5>;
|
||||
assigned-clocks = <&k3_clks 92 0>;
|
||||
assigned-clock-parents = <&k3_clks 92 1>;
|
||||
ti,otap-del-sel = <0x2>;
|
||||
ti,trm-icp = <0x8>;
|
||||
dma-coherent;
|
||||
};
|
||||
};
|
||||
72
arch/arm/dts/k3-j721e-mcu-wakeup.dtsi
Normal file
72
arch/arm/dts/k3-j721e-mcu-wakeup.dtsi
Normal file
|
|
@ -0,0 +1,72 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for J721E SoC Family MCU/WAKEUP Domain peripherals
|
||||
*
|
||||
* Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*/
|
||||
|
||||
&cbass_mcu_wakeup {
|
||||
dmsc: dmsc@44083000 {
|
||||
compatible = "ti,k2g-sci";
|
||||
ti,host-id = <12>;
|
||||
|
||||
mbox-names = "rx", "tx";
|
||||
|
||||
mboxes= <&secure_proxy_main 11>,
|
||||
<&secure_proxy_main 13>;
|
||||
|
||||
reg-names = "debug_messages";
|
||||
reg = <0x00 0x44083000 0x0 0x1000>;
|
||||
|
||||
k3_pds: power-controller {
|
||||
compatible = "ti,sci-pm-domain";
|
||||
#power-domain-cells = <2>;
|
||||
};
|
||||
|
||||
k3_clks: clocks {
|
||||
compatible = "ti,k2g-sci-clk";
|
||||
#clock-cells = <2>;
|
||||
ti,scan-clocks-from-dt;
|
||||
};
|
||||
|
||||
k3_reset: reset-controller {
|
||||
compatible = "ti,sci-reset";
|
||||
#reset-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
wkup_pmx0: pinmux@4301c000 {
|
||||
compatible = "pinctrl-single";
|
||||
/* Proxy 0 addressing */
|
||||
reg = <0x00 0x4301c000 0x00 0x178>;
|
||||
#pinctrl-cells = <1>;
|
||||
pinctrl-single,register-width = <32>;
|
||||
pinctrl-single,function-mask = <0xffffffff>;
|
||||
};
|
||||
|
||||
wkup_uart0: serial@42300000 {
|
||||
compatible = "ti,j721e-uart", "ti,am654-uart";
|
||||
reg = <0x00 0x42300000 0x00 0x100>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <48000000>;
|
||||
current-speed = <115200>;
|
||||
power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&k3_clks 287 0>;
|
||||
clock-names = "fclk";
|
||||
};
|
||||
|
||||
mcu_uart0: serial@40a00000 {
|
||||
compatible = "ti,j721e-uart", "ti,am654-uart";
|
||||
reg = <0x00 0x40a00000 0x00 0x100>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <96000000>;
|
||||
current-speed = <115200>;
|
||||
power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
|
||||
clocks = <&k3_clks 149 0>;
|
||||
clock-names = "fclk";
|
||||
};
|
||||
};
|
||||
177
arch/arm/dts/k3-j721e.dtsi
Normal file
177
arch/arm/dts/k3-j721e.dtsi
Normal file
|
|
@ -0,0 +1,177 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for J721E SoC Family
|
||||
*
|
||||
* Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/pinctrl/k3.h>
|
||||
#include <dt-bindings/soc/ti,sci_pm_domain.h>
|
||||
|
||||
/ {
|
||||
model = "Texas Instruments K3 J721E SoC";
|
||||
compatible = "ti,j721e";
|
||||
interrupt-parent = <&gic500>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
aliases {
|
||||
serial0 = &wkup_uart0;
|
||||
serial1 = &mcu_uart0;
|
||||
serial2 = &main_uart0;
|
||||
serial3 = &main_uart1;
|
||||
serial4 = &main_uart2;
|
||||
serial5 = &main_uart3;
|
||||
serial6 = &main_uart4;
|
||||
serial7 = &main_uart5;
|
||||
serial8 = &main_uart6;
|
||||
serial9 = &main_uart7;
|
||||
serial10 = &main_uart8;
|
||||
serial11 = &main_uart9;
|
||||
};
|
||||
|
||||
chosen { };
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cpu-map {
|
||||
cluster0: cluster0 {
|
||||
core0 {
|
||||
cpu = <&cpu0>;
|
||||
};
|
||||
|
||||
core1 {
|
||||
cpu = <&cpu1>;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
cpu0: cpu@0 {
|
||||
compatible = "arm,cortex-a72";
|
||||
reg = <0x000>;
|
||||
device_type = "cpu";
|
||||
enable-method = "psci";
|
||||
i-cache-size = <0xC000>;
|
||||
i-cache-line-size = <64>;
|
||||
i-cache-sets = <256>;
|
||||
d-cache-size = <0x8000>;
|
||||
d-cache-line-size = <64>;
|
||||
d-cache-sets = <128>;
|
||||
next-level-cache = <&L2_0>;
|
||||
};
|
||||
|
||||
cpu1: cpu@1 {
|
||||
compatible = "arm,cortex-a72";
|
||||
reg = <0x001>;
|
||||
device_type = "cpu";
|
||||
enable-method = "psci";
|
||||
i-cache-size = <0xC000>;
|
||||
i-cache-line-size = <64>;
|
||||
i-cache-sets = <256>;
|
||||
d-cache-size = <0x8000>;
|
||||
d-cache-line-size = <64>;
|
||||
d-cache-sets = <128>;
|
||||
next-level-cache = <&L2_0>;
|
||||
};
|
||||
};
|
||||
|
||||
L2_0: l2-cache0 {
|
||||
compatible = "cache";
|
||||
cache-level = <2>;
|
||||
cache-size = <0x100000>;
|
||||
cache-line-size = <64>;
|
||||
cache-sets = <2048>;
|
||||
next-level-cache = <&msmc_l3>;
|
||||
};
|
||||
|
||||
msmc_l3: l3-cache0 {
|
||||
compatible = "cache";
|
||||
cache-level = <3>;
|
||||
};
|
||||
|
||||
firmware {
|
||||
optee {
|
||||
compatible = "linaro,optee-tz";
|
||||
method = "smc";
|
||||
};
|
||||
|
||||
psci: psci {
|
||||
compatible = "arm,psci-1.0";
|
||||
method = "smc";
|
||||
};
|
||||
};
|
||||
|
||||
a72_timer0: timer-cl0-cpu0 {
|
||||
compatible = "arm,armv8-timer";
|
||||
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
|
||||
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
|
||||
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
|
||||
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
|
||||
};
|
||||
|
||||
pmu: pmu {
|
||||
compatible = "arm,armv8-pmuv3";
|
||||
/* Recommendation from GIC500 TRM Table A.3 */
|
||||
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
|
||||
cbass_main: interconnect@100000 {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
|
||||
<0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
|
||||
<0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */
|
||||
<0x00 0x00A40000 0x00 0x00A40000 0x00 0x00000800>, /* timesync router */
|
||||
<0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */
|
||||
<0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */
|
||||
<0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/
|
||||
<0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */
|
||||
<0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */
|
||||
<0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */
|
||||
<0x4d 0x81800000 0x4d 0x81800000 0x00 0x00800000>, /* C66_1 */
|
||||
<0x4e 0x20000000 0x4e 0x20000000 0x00 0x00080000>, /* GPU */
|
||||
/* MCUSS_WKUP Range */
|
||||
<0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
|
||||
<0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>,
|
||||
<0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>,
|
||||
<0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
|
||||
<0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
|
||||
<0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>,
|
||||
<0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
|
||||
<0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
|
||||
<0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
|
||||
<0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
|
||||
<0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>,
|
||||
<0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>,
|
||||
<0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
|
||||
<0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
|
||||
|
||||
cbass_mcu_wakeup: interconnect@28380000 {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
|
||||
<0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */
|
||||
<0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
|
||||
<0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
|
||||
<0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
|
||||
<0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */
|
||||
<0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */
|
||||
<0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
|
||||
<0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
|
||||
<0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
|
||||
<0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */
|
||||
<0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */
|
||||
<0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* Now include the peripherals for each bus segments */
|
||||
#include "k3-j721e-main.dtsi"
|
||||
#include "k3-j721e-mcu-wakeup.dtsi"
|
||||
Loading…
Reference in New Issue
Block a user