arm64: zynqmp: Add support for e-a2197-00 System Controller
Add support for System Controller available on e-a2197-00 base board. System is very similar to p-a2197-00 board. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
This commit is contained in:
Michal Simek
parent
19096aba4f
commit
6bf27ed9ae
|
|
@ -250,6 +250,7 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += \
|
|||
avnet-ultra96-rev1.dtb \
|
||||
avnet-ultrazedev-cc-v1.0-ultrazedev-som-v1.0.dtb \
|
||||
zynqmp-a2197-revA.dtb \
|
||||
zynqmp-e-a2197-00-revA.dtb \
|
||||
zynqmp-g-a2197-00-revA.dtb \
|
||||
zynqmp-m-a2197-01-revA.dtb \
|
||||
zynqmp-m-a2197-02-revA.dtb \
|
||||
|
|
|
|||
|
|
@ -0,0 +1,559 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* dts file for Xilinx Versal a2197 RevA System Controller
|
||||
*
|
||||
* (C) Copyright 2019, Xilinx, Inc.
|
||||
*
|
||||
* Michal Simek <michal.simek@xilinx.com>
|
||||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include "zynqmp.dtsi"
|
||||
#include "zynqmp-clk-ccf.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/phy/phy.h>
|
||||
|
||||
/ {
|
||||
model = "Versal System Controller on a2197 Eval board RevA"; /* VCK190/VMK180 */
|
||||
compatible = "xlnx,zynqmp-e-a2197-00-revA", "xlnx,zynqmp-a2197-revA",
|
||||
"xlnx,zynqmp-a2197", "xlnx,zynqmp";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gem0;
|
||||
gpio0 = &gpio;
|
||||
i2c0 = &i2c0;
|
||||
i2c1 = &i2c1;
|
||||
mmc0 = &sdhci1;
|
||||
rtc0 = &rtc;
|
||||
serial0 = &uart0;
|
||||
serial1 = &dcc;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "earlycon";
|
||||
stdout-path = "serial0:115200n8";
|
||||
xlnx,eeprom = <&eeprom>;
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x80000000>;
|
||||
};
|
||||
|
||||
ina226-vccint {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&vccint 0>, <&vccint 1>, <&vccint 2>, <&vccint 3>;
|
||||
};
|
||||
ina226-vcc-soc {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&vcc_soc 0>, <&vcc_soc 1>, <&vcc_soc 2>, <&vcc_soc 3>;
|
||||
};
|
||||
ina226-vcc-pmc {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&vcc_pmc 0>, <&vcc_pmc 1>, <&vcc_pmc 2>, <&vcc_pmc 3>;
|
||||
};
|
||||
ina226-vcc-ram {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&vcc_ram 0>, <&vcc_ram 1>, <&vcc_ram 2>, <&vcc_ram 3>;
|
||||
};
|
||||
ina226-vcc-pslp {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&vcc_pslp 0>, <&vcc_pslp 1>, <&vcc_pslp 2>, <&vcc_pslp 3>;
|
||||
};
|
||||
ina226-vcc-psfp {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&vcc_psfp 0>, <&vcc_psfp 1>, <&vcc_psfp 2>, <&vcc_psfp 3>;
|
||||
};
|
||||
ina226-vccaux {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&vccaux 0>, <&vccaux 1>, <&vccaux 2>, <&vccaux 3>;
|
||||
};
|
||||
ina226-vccaux-pmc {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&vccaux_pmc 0>, <&vccaux_pmc 1>, <&vccaux_pmc 2>, <&vccaux_pmc 3>;
|
||||
};
|
||||
ina226-vcco-500 {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&vcco_500 0>, <&vcco_500 1>, <&vcco_500 2>, <&vcco_500 3>;
|
||||
};
|
||||
ina226-vcco-501 {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&vcco_501 0>, <&vcco_501 1>, <&vcco_501 2>, <&vcco_501 3>;
|
||||
};
|
||||
ina226-vcco-502 {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&vcco_502 0>, <&vcco_502 1>, <&vcco_502 2>, <&vcco_502 3>;
|
||||
};
|
||||
ina226-vcco-503 {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&vcco_503 0>, <&vcco_503 1>, <&vcco_503 2>, <&vcco_503 3>;
|
||||
};
|
||||
ina226-vcc-1v8 {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&vcc_1v8 0>, <&vcc_1v8 1>, <&vcc_1v8 2>, <&vcc_1v8 3>;
|
||||
};
|
||||
ina226-vcc-3v3 {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&vcc_3v3 0>, <&vcc_3v3 1>, <&vcc_3v3 2>, <&vcc_3v3 3>;
|
||||
};
|
||||
ina226-vcc-1v2-ddr4 {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&vcc_1v2_ddr4 0>, <&vcc_1v2_ddr4 1>, <&vcc_1v2_ddr4 2>, <&vcc_1v2_ddr4 3>;
|
||||
};
|
||||
ina226-vcc-1v1-lp4 {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&vcc1v1_lp4 0>, <&vcc1v1_lp4 1>, <&vcc1v1_lp4 2>, <&vcc1v1_lp4 3>;
|
||||
};
|
||||
ina226-vadj-fmc {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&vadj_fmc 0>, <&vadj_fmc 1>, <&vadj_fmc 2>, <&vadj_fmc 3>;
|
||||
};
|
||||
ina226-mgtyavcc {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&mgtyavcc 0>, <&mgtyavcc 1>, <&mgtyavcc 2>, <&mgtyavcc 3>;
|
||||
};
|
||||
ina226-mgtyavtt {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&mgtyavtt 0>, <&mgtyavtt 1>, <&mgtyavtt 2>, <&mgtyavtt 3>;
|
||||
};
|
||||
ina226-mgtyvccaux {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&mgtyvccaux 0>, <&mgtyvccaux 1>, <&mgtyvccaux 2>, <&mgtyvccaux 3>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 { /* uart0 MIO38-39 */
|
||||
status = "okay";
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
&sdhci1 { /* sd1 MIO45-51 cd in place */
|
||||
status = "okay";
|
||||
no-1-8-v;
|
||||
disable-wp;
|
||||
xlnx,mio_bank = <1>;
|
||||
};
|
||||
|
||||
&gem0 {
|
||||
status = "okay";
|
||||
phy-handle = <&phy0>;
|
||||
phy-mode = "sgmii";
|
||||
is-internal-pcspma;
|
||||
phy0: ethernet-phy@0 { /* u131 M88E1512 */
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&gpio {
|
||||
status = "okay";
|
||||
gpio-line-names = "", "", "", "", "", /* 0 - 4 */
|
||||
"", "", "DC_SYS_CTRL0", "DC_SYS_CTRL1", "DC_SYS_CTRL2", /* 5 - 9 */
|
||||
"DC_SYS_CTRL3", "ZU4_TRIGGER", "SYSCTLR_PB", "", "", /* 10 - 14 */
|
||||
"", "", "", "", "", /* 15 - 19 */
|
||||
"", "", "", "", "", /* 20 - 24 */
|
||||
"", "", "", "", "", /* 25 - 29 */
|
||||
"", "", "", "", "LP_I2C0_PMC_SCL", /* 30 - 34 */
|
||||
"LP_I2C0_PMC_SDA", "LP_I2C1_SCL", "LP_I2C1_SDA", "UART0_RXD_IN", "UART0_TXD_OUT", /* 35 - 39 */
|
||||
"", "", "ETH_RESET_B", "", "", /* 40 - 44 */
|
||||
"SD1_CD_B", "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3", /* 45 - 49 */
|
||||
"SD1_CMD", "SD1_CLK", "", "", "", /* 50 - 54 */
|
||||
"", "", "", "", "", /* 55 - 59 */
|
||||
"", "", "", "", "", /* 60 - 64 */
|
||||
"", "", "", "", "", /* 65 - 69 */
|
||||
"", "", "", "", "", /* 70 - 74 */
|
||||
"", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */
|
||||
"", "", /* 78 - 79 */
|
||||
"", "", "", "", "", /* 80 - 84 */
|
||||
"", "", "", "", "", /* 85 -89 */
|
||||
"", "", "", "", "", /* 90 - 94 */
|
||||
"", "", "", "", "", /* 95 - 99 */
|
||||
"", "", "", "", "", /* 100 - 104 */
|
||||
"", "", "", "", "", /* 105 - 109 */
|
||||
"", "", "", "", "", /* 110 - 114 */
|
||||
"", "", "", "", "", /* 115 - 119 */
|
||||
"", "", "", "", "", /* 120 - 124 */
|
||||
"", "", "", "", "", /* 125 - 129 */
|
||||
"", "", "", "", "", /* 130 - 134 */
|
||||
"", "", "", "", "", /* 135 - 139 */
|
||||
"", "", "", "", "", /* 140 - 144 */
|
||||
"", "", "", "", "", /* 145 - 149 */
|
||||
"", "", "", "", "", /* 150 - 154 */
|
||||
"", "", "", "", "", /* 155 - 159 */
|
||||
"", "", "", "", "", /* 160 - 164 */
|
||||
"", "", "", "", "", /* 165 - 169 */
|
||||
"", "", "", ""; /* 170 - 174 */
|
||||
};
|
||||
|
||||
&i2c0 { /* MIO 34-35 - can't stay here */
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
i2c-mux@74 { /* u33 */
|
||||
compatible = "nxp,pca9548";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x74>;
|
||||
/* reset-gpios = <&gpio SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */
|
||||
i2c@0 { /* PMBUS */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
/* u152 IR35215 0x16/0x46 vcc_soc */
|
||||
/* u160 IRPS5401 0x17/0x47 */
|
||||
/* u167 IRPS5401 0x1c/0x4c */
|
||||
/* u175 IRPS5401 0x1d/0x4d */
|
||||
/* u179 ir38164 0x19/0x49 vcco_500 */
|
||||
/* u181 ir38164 0x1a/0x4a vcco_501 */
|
||||
/* u183 ir38164 0x1b/0x4b vcco_502 */
|
||||
/* u185 ir38164 0x1e/0x4e vadj_fmc */
|
||||
/* u187 ir38164 0x1F/0x4f mgtyavcc */
|
||||
/* u189 ir38164 0x20/0x50 mgtyavtt */
|
||||
/* u194 ir38164 0x13/0x43 vdd1_1v8_lp4 */
|
||||
/* u195 ir38164 0x14/0x44 vdd2_1v8_lp4 */
|
||||
};
|
||||
i2c@1 { /* PMBUS1_INA226 */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
/* FIXME check alerts coming to SC */
|
||||
vccint: ina226@40 { /* u65 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-vccint";
|
||||
reg = <0x40>;
|
||||
shunt-resistor = <5000>; /* R440 */
|
||||
/* 0.78V @ 32A 1 of 6 Phases*/
|
||||
};
|
||||
vcc_soc: ina226@41 { /* u161 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-vcc-soc";
|
||||
reg = <0x41>;
|
||||
shunt-resistor = <2000>; /* R1186 */
|
||||
/* 0.78V @ 18A */
|
||||
};
|
||||
vcc_pmc: ina226@42 { /* u163 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-vcc-pmc";
|
||||
reg = <0x42>;
|
||||
shunt-resistor = <5000>; /* R1214 */
|
||||
/* 0.78V @ 500mA */
|
||||
};
|
||||
vcc_ram: ina226@43 { /* u162 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-vcc-ram";
|
||||
reg = <0x43>;
|
||||
shunt-resistor = <5000>; /* r1221 */
|
||||
/* 0.78V @ 4A */
|
||||
};
|
||||
vcc_pslp: ina226@44 { /* u165 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-vcc-pslp";
|
||||
reg = <0x44>;
|
||||
shunt-resistor = <5000>; /* R1216 */
|
||||
/* 0.78V @ 1A */
|
||||
};
|
||||
vcc_psfp: ina226@45 { /* u164 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-vcc-psfp";
|
||||
reg = <0x45>;
|
||||
shunt-resistor = <5000>; /* R1219 */
|
||||
/* 0.78V @ 2A */
|
||||
};
|
||||
};
|
||||
i2c@2 { /* PCIE_CLK */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
clock_8t49n287: clock-generator@d8 { /* u39 8T49N240 */
|
||||
#clock-cells = <1>; /* author David Cater <david.cater@idt.com>*/
|
||||
compatible = "idt,8t49n240", "idt,8t49n241"; /* FIXME no driver for 240 */
|
||||
reg = <0xd8>;
|
||||
/* Documentation/devicetree/bindings/clock/idt,idt8t49n24x.txt */
|
||||
/* FIXME there input via J241 Samtec CLK1 and CLK0 from U38 - selection PIN */
|
||||
};
|
||||
};
|
||||
i2c@3 { /* PMBUS2_INA226 */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
/* FIXME check alerts coming to SC */
|
||||
vccaux: ina226@40 { /* u166 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-vccaux";
|
||||
reg = <0x40>;
|
||||
shunt-resistor = <5000>; /* R382 */
|
||||
/* 1.5V @ 3A */
|
||||
};
|
||||
vccaux_pmc: ina226@41 { /* u168 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-vccaux-pmc";
|
||||
reg = <0x41>;
|
||||
shunt-resistor = <5000>; /* R1246 */
|
||||
/* 1.5V @ 500mA */
|
||||
};
|
||||
vcco_500: ina226@42 { /* u178 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-vcco-500";
|
||||
reg = <0x42>;
|
||||
shunt-resistor = <2000>; /* R1300 */
|
||||
/* 3.3V @ 5A */
|
||||
};
|
||||
vcco_501: ina226@43 { /* u180 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-vcco-501";
|
||||
reg = <0x43>;
|
||||
shunt-resistor = <2000>; /* R1313 */
|
||||
/* 3.3V @ 5A */
|
||||
};
|
||||
vcco_502: ina226@44 { /* u182 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-vcco-502";
|
||||
reg = <0x44>;
|
||||
shunt-resistor = <2000>; /* R1330 */
|
||||
/* 3.3V @ 5A */
|
||||
};
|
||||
vcco_503: ina226@45 { /* u172 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-vcco-503";
|
||||
reg = <0x45>;
|
||||
shunt-resistor = <5000>; /* R1229 */
|
||||
/* 1.8V @ 2A */
|
||||
};
|
||||
vcc_1v8: ina226@46 { /* u173 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-vcc-1v8";
|
||||
reg = <0x46>;
|
||||
shunt-resistor = <5000>; /* R400 */
|
||||
/* 1.8V @ 6A */
|
||||
};
|
||||
vcc_3v3: ina226@47 { /* u174 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-vcc-3v3";
|
||||
reg = <0x47>;
|
||||
shunt-resistor = <5000>; /* R1232 */
|
||||
/* 3.3V @ 500mA */
|
||||
};
|
||||
vcc_1v2_ddr4: ina226@48 { /* u176 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-vcc-1v2-ddr4";
|
||||
reg = <0x48>;
|
||||
shunt-resistor = <5000>; /* R1275 */
|
||||
/* 1.2V @ 4A */
|
||||
};
|
||||
vcc1v1_lp4: ina226@49 { /* u177 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-vcc1v1-lp4";
|
||||
reg = <0x49>;
|
||||
shunt-resistor = <5000>; /* R1286 */
|
||||
/* 1.1V @ 4A */
|
||||
};
|
||||
vadj_fmc: ina226@4a { /* u184 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-vadj-fmc";
|
||||
reg = <0x4a>;
|
||||
shunt-resistor = <2000>; /* R1350 */
|
||||
/* 1.5V @ 10A */
|
||||
};
|
||||
mgtyavcc: ina226@4b { /* u186 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-mgtyavcc";
|
||||
reg = <0x4b>;
|
||||
shunt-resistor = <2000>; /* R1367 */
|
||||
/* 0.88V @ 6A */
|
||||
};
|
||||
mgtyavtt: ina226@4c { /* u188 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-mgtyavtt";
|
||||
reg = <0x4c>;
|
||||
shunt-resistor = <2000>; /* R1384 */
|
||||
/* 1.2V @ 10A */
|
||||
};
|
||||
mgtyvccaux: ina226@4d { /* u234 */
|
||||
compatible = "ti,ina226";
|
||||
#io-channel-cells = <1>;
|
||||
label = "ina226-mgtyvccaux";
|
||||
reg = <0x4d>;
|
||||
shunt-resistor = <5000>; /* r1679 */
|
||||
/* 1.5V @ 500mA */
|
||||
};
|
||||
};
|
||||
i2c@4 { /* LP_I2C_SM */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <4>;
|
||||
/* FIXME wires ready but chip is missing */
|
||||
};
|
||||
i2c@5 { /* zSFP_SI570 */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <5>;
|
||||
si570_zsfp: clock-generator@5d { /* u192 */
|
||||
#clock-cells = <0>;
|
||||
compatible = "silabs,si570";
|
||||
reg = <0x5d>;
|
||||
temperature-stability = <50>;
|
||||
factory-fout = <156250000>;
|
||||
clock-frequency = <156250000>;
|
||||
clock-output-names = "si570_hsdp_clk";
|
||||
};
|
||||
};
|
||||
i2c@6 { /* USER_SI570_1 */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <6>;
|
||||
si570_user1_clk: clock-generator@5d { /* u205 */
|
||||
#clock-cells = <0>;
|
||||
compatible = "silabs,si570";
|
||||
reg = <0x5f>;
|
||||
temperature-stability = <50>;
|
||||
factory-fout = <100000000>;
|
||||
clock-frequency = <100000000>;
|
||||
clock-output-names = "si570_user1";
|
||||
};
|
||||
|
||||
};
|
||||
i2c@7 { /* USER_SI570_2 */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <7>;
|
||||
/* FIXME wires ready but chip is missing */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 { /* i2c1 MIO 36-37 */
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
i2c-mux@74 { /* u35 */
|
||||
compatible = "nxp,pca9548";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x74>;
|
||||
/* reset-gpios = <&gpio SYSCTLR_IIC_MUX1_RESET_B GPIO_ACTIVE_HIGH>; */
|
||||
dc_i2c: i2c@0 { /* DC_I2C */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
/* Use for storing information about SC board */
|
||||
eeprom: eeprom@54 { /* u34 - m24128 16kB */
|
||||
compatible = "st,24c128", "atmel,24c128";
|
||||
reg = <0x54>; /* 0x5c too */
|
||||
};
|
||||
si570_ref_clk: clock-generator@5d { /* u32 */
|
||||
#clock-cells = <0>;
|
||||
compatible = "silabs,si570";
|
||||
reg = <0x5d>;
|
||||
temperature-stability = <50>;
|
||||
factory-fout = <33333333>;
|
||||
clock-frequency = <33333333>;
|
||||
clock-output-names = "ref_clk";
|
||||
};
|
||||
/* and connector J212D */
|
||||
};
|
||||
fmc1: i2c@1 { /* FMCP1_IIC */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
/* FIXME connection to Samtec J51C */
|
||||
/* expected eeprom 0x50 FMC cards */
|
||||
};
|
||||
fmc2: i2c@2 { /* FMCP2_IIC */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
/* FIXME connection to Samtec J53C */
|
||||
/* expected eeprom 0x50 FMC cards */
|
||||
};
|
||||
i2c@3 { /* DDR4_DIMM1 */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
si570_ddr_dimm1: clock-generator@60 { /* u2 */
|
||||
#clock-cells = <0>;
|
||||
compatible = "silabs,si570";
|
||||
reg = <0x60>;
|
||||
temperature-stability = <50>;
|
||||
factory-fout = <200000000>;
|
||||
clock-frequency = <200000000>;
|
||||
clock-output-names = "si570_ddrdimm1_clk";
|
||||
};
|
||||
};
|
||||
i2c@4 { /* LPDDR4_SI570_CLK2 */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <4>;
|
||||
si570_ddr_dimm2: clock-generator@60 { /* u3 */
|
||||
#clock-cells = <0>;
|
||||
compatible = "silabs,si570";
|
||||
reg = <0x60>;
|
||||
temperature-stability = <50>;
|
||||
factory-fout = <200000000>;
|
||||
clock-frequency = <200000000>;
|
||||
clock-output-names = "si570_lpddr4_clk2";
|
||||
};
|
||||
};
|
||||
i2c@5 { /* LPDDR4_SI570_CLK1 */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <5>;
|
||||
si570_lpddr4: clock-generator@60 { /* u4 */
|
||||
#clock-cells = <0>;
|
||||
compatible = "silabs,si570";
|
||||
reg = <0x60>;
|
||||
temperature-stability = <50>;
|
||||
factory-fout = <200000000>;
|
||||
clock-frequency = <200000000>;
|
||||
clock-output-names = "si570_lpddr4_clk1";
|
||||
};
|
||||
};
|
||||
i2c@6 { /* HSDP_SI570 */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <6>;
|
||||
si570_hsdp: clock-generator@5d { /* u5 */
|
||||
#clock-cells = <0>;
|
||||
compatible = "silabs,si570";
|
||||
reg = <0x5d>;
|
||||
temperature-stability = <50>;
|
||||
factory-fout = <156250000>;
|
||||
clock-frequency = <156250000>;
|
||||
clock-output-names = "si570_hsdp_clk";
|
||||
};
|
||||
};
|
||||
i2c@7 { /* 8A34001 - U219B and J310 connector */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <7>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&xilinx_ams {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ams_ps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ams_pl {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -0,0 +1,115 @@
|
|||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_ZYNQMP=y
|
||||
CONFIG_SYS_TEXT_BASE=0x8000000
|
||||
CONFIG_SYS_MALLOC_F_LEN=0x8000
|
||||
CONFIG_SPL=y
|
||||
CONFIG_DEBUG_UART_BASE=0xff000000
|
||||
CONFIG_DEBUG_UART_CLOCK=100000000
|
||||
CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal"
|
||||
CONFIG_SPL_SPI_FLASH_SUPPORT=y
|
||||
CONFIG_SPL_SPI_SUPPORT=y
|
||||
CONFIG_ZYNQMP_USB=y
|
||||
CONFIG_DEBUG_UART=y
|
||||
CONFIG_AHCI=y
|
||||
CONFIG_DISTRO_DEFAULTS=y
|
||||
CONFIG_FIT=y
|
||||
CONFIG_FIT_VERBOSE=y
|
||||
CONFIG_SPL_LOAD_FIT=y
|
||||
# CONFIG_DISPLAY_CPUINFO is not set
|
||||
CONFIG_BOARD_EARLY_INIT_R=y
|
||||
CONFIG_SPL_OS_BOOT=y
|
||||
CONFIG_SPL_RAM_SUPPORT=y
|
||||
CONFIG_SPL_RAM_DEVICE=y
|
||||
CONFIG_SPL_ATF=y
|
||||
CONFIG_CMD_THOR_DOWNLOAD=y
|
||||
CONFIG_CMD_MEMTEST=y
|
||||
CONFIG_SYS_ALT_MEMTEST=y
|
||||
CONFIG_CMD_CLK=y
|
||||
CONFIG_CMD_DFU=y
|
||||
# CONFIG_CMD_FLASH is not set
|
||||
CONFIG_CMD_FPGA_LOADBP=y
|
||||
CONFIG_CMD_FPGA_LOADP=y
|
||||
CONFIG_CMD_FPGA_LOAD_SECURE=y
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_GPT=y
|
||||
CONFIG_CMD_I2C=y
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_SDRAM=y
|
||||
CONFIG_CMD_SF=y
|
||||
CONFIG_CMD_USB=y
|
||||
CONFIG_CMD_TFTPPUT=y
|
||||
CONFIG_CMD_TIME=y
|
||||
CONFIG_CMD_TIMER=y
|
||||
CONFIG_CMD_EXT4_WRITE=y
|
||||
CONFIG_SPL_OF_CONTROL=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-e-a2197-00-revA"
|
||||
CONFIG_ENV_IS_IN_FAT=y
|
||||
CONFIG_NET_RANDOM_ETHADDR=y
|
||||
CONFIG_SPL_DM=y
|
||||
CONFIG_SPL_DM_SEQ_ALIAS=y
|
||||
CONFIG_SCSI_AHCI=y
|
||||
CONFIG_SATA_CEVA=y
|
||||
CONFIG_CLK_ZYNQMP=y
|
||||
CONFIG_DFU_RAM=y
|
||||
CONFIG_USB_FUNCTION_FASTBOOT=y
|
||||
CONFIG_FASTBOOT_FLASH=y
|
||||
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
|
||||
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
|
||||
CONFIG_FPGA_XILINX=y
|
||||
CONFIG_FPGA_ZYNQMPPL=y
|
||||
CONFIG_DM_GPIO=y
|
||||
CONFIG_XILINX_GPIO=y
|
||||
CONFIG_DM_PCA953X=y
|
||||
CONFIG_DM_I2C=y
|
||||
CONFIG_SYS_I2C_CADENCE=y
|
||||
CONFIG_I2C_MUX=y
|
||||
CONFIG_I2C_MUX_PCA954x=y
|
||||
CONFIG_LED=y
|
||||
CONFIG_LED_GPIO=y
|
||||
CONFIG_MISC=y
|
||||
CONFIG_I2C_EEPROM=y
|
||||
CONFIG_SYS_I2C_EEPROM_ADDR=0x0
|
||||
CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_ZYNQ=y
|
||||
CONFIG_SPI_FLASH=y
|
||||
CONFIG_SPI_FLASH_BAR=y
|
||||
CONFIG_SF_DUAL_FLASH=y
|
||||
CONFIG_SPI_FLASH_ISSI=y
|
||||
CONFIG_SPI_FLASH_MACRONIX=y
|
||||
CONFIG_SPI_FLASH_SPANSION=y
|
||||
CONFIG_SPI_FLASH_STMICRO=y
|
||||
CONFIG_SPI_FLASH_WINBOND=y
|
||||
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
|
||||
CONFIG_PHY_MARVELL=y
|
||||
CONFIG_PHY_NATSEMI=y
|
||||
CONFIG_PHY_REALTEK=y
|
||||
CONFIG_PHY_TI=y
|
||||
CONFIG_PHY_VITESSE=y
|
||||
CONFIG_PHY_FIXED=y
|
||||
CONFIG_PHY_GIGE=y
|
||||
CONFIG_MII=y
|
||||
CONFIG_ZYNQ_GEM=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_DM_SCSI=y
|
||||
CONFIG_DEBUG_UART_ZYNQ=y
|
||||
CONFIG_DEBUG_UART_ANNOUNCE=y
|
||||
CONFIG_ZYNQ_SERIAL=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_ZYNQMP_GQSPI=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_XHCI_HCD=y
|
||||
CONFIG_USB_XHCI_DWC3=y
|
||||
CONFIG_USB_XHCI_ZYNQMP=y
|
||||
CONFIG_USB_DWC3=y
|
||||
CONFIG_USB_DWC3_GADGET=y
|
||||
CONFIG_USB_DWC3_GENERIC=y
|
||||
CONFIG_USB_ULPI_VIEWPORT=y
|
||||
CONFIG_USB_ULPI=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
|
||||
CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
|
||||
CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
|
||||
CONFIG_USB_FUNCTION_THOR=y
|
||||
CONFIG_SPL_GZIP=y
|
||||
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
|
||||
Loading…
Reference in New Issue