ARM: dts: stm32f769: add display for STM32F769 disco board

Enable the display controller, mipi dsi bridge & panel.
Set panel display timings.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
This commit is contained in:
Yannick Fertré 2019-10-07 15:29:11 +02:00 committed by Anatolij Gustschin
parent 0e73892184
commit 30173bacdd

View File

@ -28,10 +28,72 @@
button-gpio = <&gpioa 0 0>;
};
dsi_host: dsi_host {
compatible = "synopsys,dw-mipi-dsi";
status = "okay";
};
led1 {
compatible = "st,led1";
led-gpio = <&gpioj 5 0>;
};
panel: panel {
compatible = "orisetech,otm8009a";
reset-gpios = <&gpioj 15 1>;
status = "okay";
port {
panel_in: endpoint {
remote-endpoint = <&dsi_out>;
};
};
};
soc {
dsi: dsi@40016c00 {
compatible = "st,stm32-dsi";
reg = <0x40016C00 0x800>;
resets = <&rcc STM32F7_APB2_RESET(DSI)>;
clocks = <&rcc 0 STM32F7_APB2_CLOCK(DSI)>,
<&rcc 0 STM32F7_APB2_CLOCK(LTDC)>,
<&clk_hse>;
clock-names = "pclk", "px_clk", "ref";
u-boot,dm-pre-reloc;
status = "okay";
ports {
port@0 {
dsi_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
port@1 {
dsi_in: endpoint {
remote-endpoint = <&dp_out>;
};
};
};
};
ltdc: display-controller@40016800 {
compatible = "st,stm32-ltdc";
reg = <0x40016800 0x200>;
resets = <&rcc STM32F7_APB2_RESET(LTDC)>;
clocks = <&rcc 0 STM32F7_APB2_CLOCK(LTDC)>;
status = "okay";
u-boot,dm-pre-reloc;
ports {
port@0 {
dp_out: endpoint {
remote-endpoint = <&dsi_in>;
};
};
};
};
};
};
&fmc {