board/aries: Remove

The various Aries Embedded boards have been orphaned for a year and no
one has come forward to take care of them.  Remove.

Signed-off-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Tom Rini 2018-07-02 15:52:50 -04:00
parent 6c88079e24
commit 03b54997d5
40 changed files with 1 additions and 4142 deletions

View File

@ -156,8 +156,6 @@ matrix:
BUILDMAN="arm926ejs -x mx,siemens,atmel"
- env:
- BUILDMAN="atmel"
- env:
- BUILDMAN="aries"
- env:
BUILDMAN="boundary engicam toradex"
- env:
@ -192,7 +190,7 @@ matrix:
- BUILDMAN="sun50i"
- env:
- JOB="Catch-all ARM"
BUILDMAN="arm -x arm11,arm7,arm9,aarch64,atmel,aries,freescale,kirkwood,mvebu,siemens,tegra,uniphier,mx,samsung,sunxi,am33xx,omap,pxa,rockchip,toradex,socfpga,k2,xilinx"
BUILDMAN="arm -x arm11,arm7,arm9,aarch64,atmel,freescale,kirkwood,mvebu,siemens,tegra,uniphier,mx,samsung,sunxi,am33xx,omap,pxa,rockchip,toradex,socfpga,k2,xilinx"
- env:
- BUILDMAN="sandbox x86"
TOOLCHAIN="x86_64"

View File

@ -189,7 +189,6 @@ dtb-$(CONFIG_ARCH_SOCFPGA) += \
socfpga_arria5_socdk.dtb \
socfpga_arria10_socdk_sdmmc.dtb \
socfpga_cyclone5_is1.dtb \
socfpga_cyclone5_mcvevk.dtb \
socfpga_cyclone5_socdk.dtb \
socfpga_cyclone5_dbm_soc1.dtb \
socfpga_cyclone5_de0_nano_soc.dtb \
@ -511,9 +510,6 @@ dtb-$(CONFIG_TARGET_SAMA5D3XEK) += \
dtb-$(CONFIG_TARGET_SAMA5D3_XPLAINED) += \
at91-sama5d3_xplained.dtb
dtb-$(CONFIG_TARGET_MA5D4EK) += \
at91-sama5d4_ma5d4evk.dts.dtb
dtb-$(CONFIG_TARGET_SAMA5D4EK) += \
at91-sama5d4ek.dtb

View File

@ -1,142 +0,0 @@
/*
* Copyright (C) 2015 Marek Vasut <marex@denx.de>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include "sama5d4.dtsi"
/ {
model = "Aries/DENX MA5D4";
compatible = "aries,ma5d4", "denx,ma5d4", "atmel,sama5d4", "atmel,sama5";
memory {
reg = <0x20000000 0x10000000>;
};
clocks {
slow_xtal {
clock-frequency = <32768>;
};
main_xtal {
clock-frequency = <12000000>;
};
clk20m: clk20m {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <20000000>;
clock-output-names = "clk20m";
};
};
ahb {
apb {
mmc0: mmc@f8000000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
vmmc-supply = <&vcc_mmc0_reg>;
vqmmc-supply = <&vcc_3v3_reg>;
status = "okay";
slot@0 {
reg = <0>;
bus-width = <8>;
broken-cd;
};
};
spi0: spi@f8010000 {
cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
status = "okay";
m25p80@0 {
compatible = "atmel,at25df321a";
spi-max-frequency = <50000000>;
reg = <0>;
};
};
i2c0: i2c@f8014000 {
status = "okay";
};
spi1: spi@fc018000 {
cs-gpios = <&pioB 22 0>, <&pioB 23 0>, <0>, <0>;
status = "okay";
can0: can@0 {
compatible = "microchip,mcp2515";
reg = <0>;
clocks = <&clk20m>;
interrupt-parent = <&pioE>;
interrupts = <6 IRQ_TYPE_EDGE_RISING>;
spi-max-frequency = <10000000>;
};
can1: can@1 {
compatible = "microchip,mcp2515";
reg = <1>;
clocks = <&clk20m>;
interrupt-parent = <&pioE>;
interrupts = <7 IRQ_TYPE_EDGE_RISING>;
spi-max-frequency = <10000000>;
};
};
tcb2: timer@fc024000 {
timer@0 {
compatible = "atmel,tcb-timer";
reg = <0>;
};
timer@1 {
compatible = "atmel,tcb-timer";
reg = <1>;
};
};
adc0: adc@fc034000 {
pinctrl-names = "default";
pinctrl-0 = <
/* external trigger conflicts with USBA_VBUS */
&pinctrl_adc0_ad0
&pinctrl_adc0_ad1
&pinctrl_adc0_ad2
&pinctrl_adc0_ad3
&pinctrl_adc0_ad4
>;
atmel,adc-vref = <3300>;
status = "okay";
};
watchdog@fc068640 {
status = "okay";
};
};
};
vcc_3v3_reg: fixedregulator_3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC 3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
vcc_mmc0_reg: fixedregulator_mmc0 {
compatible = "regulator-fixed";
gpio = <&pioE 15 GPIO_ACTIVE_HIGH>;
regulator-name = "RST_n MCI0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_3v3_reg>;
regulator-boot-on;
};
};

View File

@ -1,149 +0,0 @@
/*
* Copyright (C) 2015 Marek Vasut <marex@denx.de>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "at91-sama5d4_ma5d4.dtsi"
/ {
model = "Aries/DENX MA5D4EVK";
compatible = "aries,ma5d4evk", "denx,ma5d4evk", "atmel,sama5d4", "atmel,sama5";
chosen {
stdout-path = "serial3:115200n8";
};
ahb {
apb {
hlcdc: hlcdc@f0000000 {
status = "okay";
hlcdc-display-controller {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
port@0 {
hlcdc_panel_output: endpoint@0 {
reg = <0>;
remote-endpoint = <&panel_input>;
};
};
};
};
macb0: ethernet@f8020000 {
phy-mode = "rmii";
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
};
};
usart0: serial@f802c000 {
status = "okay";
};
usart1: serial@f8030000 {
status = "okay";
};
mmc1: mmc@fc000000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
vmmc-supply = <&vcc_mmc1_reg>;
vqmmc-supply = <&vcc_3v3_reg>;
status = "okay";
slot@0 {
reg = <0>;
bus-width = <4>;
cd-gpios = <&pioE 5 0>;
};
};
adc0: adc@fc034000 {
atmel,adc-ts-wires = <4>;
atmel,adc-ts-pressure-threshold = <10000>;
};
pinctrl@fc06a000 {
board {
pinctrl_mmc1_cd: mmc1_cd {
atmel,pins = <AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
};
pinctrl_usba_vbus: usba_vbus {
atmel,pins =
<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
};
};
};
};
};
backlight: backlight {
compatible = "pwm-backlight";
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
status = "okay";
};
leds {
compatible = "gpio-leds";
status = "okay";
user1 {
label = "user1";
gpios = <&pioD 28 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
user2 {
label = "user2";
gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
user3 {
label = "user3";
gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
panel: panel {
/* Actually Ampire 800480R2 */
compatible = "foxlink,fl500wvr00-a0t", "simple-panel";
backlight = <&backlight>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
port@0 {
#address-cells = <1>;
#size-cells = <0>;
panel_input: endpoint@0 {
reg = <0>;
remote-endpoint = <&hlcdc_panel_output>;
};
};
};
vcc_mmc1_reg: fixedregulator_mmc1 {
compatible = "regulator-fixed";
gpio = <&pioE 17 GPIO_ACTIVE_LOW>;
regulator-name = "VDD MCI1";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_3v3_reg>;
};
};

View File

@ -1,58 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2015 Marek Vasut <marex@denx.de>
*/
#include "socfpga_cyclone5.dtsi"
/ {
model = "Aries MCVEVK";
compatible = "altr,socfpga-cyclone5", "altr,socfpga";
chosen {
bootargs = "console=ttyS0,115200";
};
aliases {
ethernet0 = &gmac0;
udc0 = &usb1;
};
memory {
name = "memory";
device_type = "memory";
reg = <0x0 0x40000000>; /* 1GB */
};
soc {
u-boot,dm-pre-reloc;
};
};
&gmac0 {
status = "okay";
phy-mode = "rgmii";
};
&gpio0 {
status = "okay";
};
&gpio1 {
status = "okay";
};
&gpio2 {
status = "okay";
};
&mmc0 {
status = "okay";
bus-width = <8>;
u-boot,dm-pre-reloc;
};
&usb1 {
disable-over-current;
status = "okay";
};

View File

@ -197,14 +197,6 @@ config TARGET_SAMA5D4EK
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
config TARGET_MA5D4EVK
bool "Aries MA5D4EVK Evaluation Kit"
select SAMA5D4
select SUPPORT_SPL
select DM
select DM_SPI
select SPI
config TARGET_MEESC
bool "Support meesc"
select AT91SAM9263
@ -263,7 +255,6 @@ endchoice
config SYS_SOC
default "at91"
source "board/aries/ma5d4evk/Kconfig"
source "board/atmel/at91rm9200ek/Kconfig"
source "board/atmel/at91sam9260ek/Kconfig"
source "board/atmel/at91sam9261ek/Kconfig"

View File

@ -29,11 +29,6 @@ config TARGET_KP_IMX53
select DM_GPIO
select DM_PMIC
config TARGET_M53EVK
bool "Support m53evk"
select MX53
select SUPPORT_SPL
config TARGET_MX51EVK
bool "Support mx51evk"
select BOARD_LATE_INIT
@ -83,7 +78,6 @@ endchoice
config SYS_SOC
default "mx5"
source "board/aries/m53evk/Kconfig"
source "board/beckhoff/mx53cx9020/Kconfig"
source "board/freescale/mx51evk/Kconfig"
source "board/freescale/mx53ard/Kconfig"

View File

@ -9,6 +9,5 @@ obj-y := soc.o clock.o
obj-y += lowlevel_init.o
# common files for mx53 dram initialization
obj-$(CONFIG_TARGET_M53EVK) += mx53_dram.o
obj-$(CONFIG_TARGET_MX53CX9020) += mx53_dram.o
obj-$(CONFIG_TARGET_MX53LOCO) += mx53_dram.o

View File

@ -50,9 +50,6 @@ config TARGET_APX4DEVKIT
config TARGET_BG0900
bool "Support bg0900"
config TARGET_M28EVK
bool "Support m28evk"
config TARGET_MX28EVK
bool "Support mx28evk"
select BOARD_EARLY_INIT_F
@ -68,7 +65,6 @@ endchoice
config SYS_SOC
default "mxs"
source "board/aries/m28evk/Kconfig"
source "board/bluegiga/apx4devkit/Kconfig"
source "board/freescale/mx28evk/Kconfig"
source "board/ppcag/bg0900/Kconfig"

View File

@ -36,10 +36,6 @@ config TARGET_SOCFPGA_CYCLONE5_SOCDK
bool "Altera SOCFPGA SoCDK (Cyclone V)"
select TARGET_SOCFPGA_CYCLONE5
config TARGET_SOCFPGA_ARIES_MCVEVK
bool "Aries MCVEVK (Cyclone V)"
select TARGET_SOCFPGA_CYCLONE5
config TARGET_SOCFPGA_DEVBOARDS_DBM_SOC1
bool "Devboards DBM-SoC1 (Cyclone V)"
select TARGET_SOCFPGA_CYCLONE5
@ -88,7 +84,6 @@ config SYS_BOARD
default "de1-soc" if TARGET_SOCFPGA_TERASIC_DE1_SOC
default "de10-nano" if TARGET_SOCFPGA_TERASIC_DE10_NANO
default "is1" if TARGET_SOCFPGA_IS1
default "mcvevk" if TARGET_SOCFPGA_ARIES_MCVEVK
default "sockit" if TARGET_SOCFPGA_TERASIC_SOCKIT
default "socrates" if TARGET_SOCFPGA_EBV_SOCRATES
default "sr1500" if TARGET_SOCFPGA_SR1500
@ -98,7 +93,6 @@ config SYS_VENDOR
default "altera" if TARGET_SOCFPGA_ARRIA5_SOCDK
default "altera" if TARGET_SOCFPGA_ARRIA10_SOCDK
default "altera" if TARGET_SOCFPGA_CYCLONE5_SOCDK
default "aries" if TARGET_SOCFPGA_ARIES_MCVEVK
default "devboards" if TARGET_SOCFPGA_DEVBOARDS_DBM_SOC1
default "ebv" if TARGET_SOCFPGA_EBV_SOCRATES
default "samtec" if TARGET_SOCFPGA_SAMTEC_VINING_FPGA
@ -119,7 +113,6 @@ config SYS_CONFIG_NAME
default "socfpga_de1_soc" if TARGET_SOCFPGA_TERASIC_DE1_SOC
default "socfpga_de10_nano" if TARGET_SOCFPGA_TERASIC_DE10_NANO
default "socfpga_is1" if TARGET_SOCFPGA_IS1
default "socfpga_mcvevk" if TARGET_SOCFPGA_ARIES_MCVEVK
default "socfpga_sockit" if TARGET_SOCFPGA_TERASIC_SOCKIT
default "socfpga_socrates" if TARGET_SOCFPGA_EBV_SOCRATES
default "socfpga_sr1500" if TARGET_SOCFPGA_SR1500

View File

@ -1,15 +0,0 @@
if TARGET_M28EVK
config SYS_BOARD
default "m28evk"
config SYS_VENDOR
default "aries"
config SYS_SOC
default "mxs"
config SYS_CONFIG_NAME
default "m28evk"
endif

View File

@ -1,6 +0,0 @@
M28EVK BOARD
#M: Marek Vasut <marek.vasut@gmail.com>
S: Orphan (since 2017-07)
F: board/aries/m28evk/
F: include/configs/m28evk.h
F: configs/m28evk_defconfig

View File

@ -1,10 +0,0 @@
# SPDX-License-Identifier: GPL-2.0+
#
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
ifndef CONFIG_SPL_BUILD
obj-y := m28evk.o
else
obj-y := spl_boot.o
endif

View File

@ -1,13 +0,0 @@
Aries M28EVK
============
Files of the M28/M28EVK port
----------------------------
arch/arm/cpu/arm926ejs/mxs/ - The CPU support code for the Freescale i.MX28
arch/arm/include/asm/arch-mxs/ - Header files for the Freescale i.MX28
board/aries/m28evk/ - M28EVK board specific files
include/configs/m28evk.h - M28EVK configuration file
Follow the instructions from doc/README.mxs to generate a bootable SD card or to
boot from NAND flash.

View File

@ -1,172 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Aries M28 module
*
* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
* on behalf of DENX Software Engineering GmbH
*/
#include <common.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/iomux-mx28.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <linux/mii.h>
#include <miiphy.h>
#include <netdev.h>
#include <errno.h>
DECLARE_GLOBAL_DATA_PTR;
/*
* Functions
*/
int board_early_init_f(void)
{
/* IO0 clock at 480MHz */
mxs_set_ioclk(MXC_IOCLK0, 480000);
/* IO1 clock at 480MHz */
mxs_set_ioclk(MXC_IOCLK1, 480000);
/* SSP0 clock at 96MHz */
mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
/* SSP2 clock at 160MHz */
mxs_set_sspclk(MXC_SSPCLK2, 160000, 0);
#ifdef CONFIG_CMD_USB
mxs_iomux_setup_pad(MX28_PAD_SSP2_SS1__USB1_OVERCURRENT);
mxs_iomux_setup_pad(MX28_PAD_AUART3_TX__GPIO_3_13 |
MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP);
gpio_direction_output(MX28_PAD_AUART3_TX__GPIO_3_13, 0);
mxs_iomux_setup_pad(MX28_PAD_AUART3_RX__GPIO_3_12 |
MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP);
gpio_direction_output(MX28_PAD_AUART3_RX__GPIO_3_12, 0);
#endif
return 0;
}
int board_init(void)
{
/* Adress of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
return 0;
}
int dram_init(void)
{
return mxs_dram_init();
}
#ifdef CONFIG_CMD_MMC
static int m28_mmc_wp(int id)
{
if (id != 0) {
printf("MXS MMC: Invalid card selected (card id = %d)\n", id);
return 1;
}
return gpio_get_value(MX28_PAD_AUART2_CTS__GPIO_3_10);
}
int board_mmc_init(bd_t *bis)
{
/* Configure WP as input. */
gpio_direction_input(MX28_PAD_AUART2_CTS__GPIO_3_10);
/* Turn on the power to the card. */
gpio_direction_output(MX28_PAD_PWM3__GPIO_3_28, 0);
return mxsmmc_initialize(bis, 0, m28_mmc_wp, NULL);
}
#endif
#ifdef CONFIG_CMD_NET
#define MII_OPMODE_STRAP_OVERRIDE 0x16
#define MII_PHY_CTRL1 0x1e
#define MII_PHY_CTRL2 0x1f
int fecmxc_mii_postcall(int phy)
{
#if defined(CONFIG_ARIES_M28_V11) || defined(CONFIG_ARIES_M28_V10)
/* KZ8031 PHY on old boards. */
const uint32_t freq = 0x0080;
#else
/* KZ8021 PHY on new boards. */
const uint32_t freq = 0x0000;
#endif
miiphy_write("FEC1", phy, MII_BMCR, 0x9000);
miiphy_write("FEC1", phy, MII_OPMODE_STRAP_OVERRIDE, 0x0202);
if (phy == 3)
miiphy_write("FEC1", 3, MII_PHY_CTRL2, 0x8100 | freq);
return 0;
}
int board_eth_init(bd_t *bis)
{
struct mxs_clkctrl_regs *clkctrl_regs =
(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
struct eth_device *dev;
int ret;
ret = cpu_eth_init(bis);
if (ret)
return ret;
clrsetbits_le32(&clkctrl_regs->hw_clkctrl_enet,
CLKCTRL_ENET_TIME_SEL_MASK | CLKCTRL_ENET_CLK_OUT_EN,
CLKCTRL_ENET_TIME_SEL_RMII_CLK);
#if !defined(CONFIG_ARIES_M28_V11) && !defined(CONFIG_ARIES_M28_V10)
/* Reset the new PHY */
gpio_direction_output(MX28_PAD_AUART2_RTS__GPIO_3_11, 0);
udelay(10000);
gpio_set_value(MX28_PAD_AUART2_RTS__GPIO_3_11, 1);
udelay(10000);
#endif
ret = fecmxc_initialize_multi(bis, 0, 0, MXS_ENET0_BASE);
if (ret) {
printf("FEC MXS: Unable to init FEC0\n");
return ret;
}
ret = fecmxc_initialize_multi(bis, 1, 3, MXS_ENET1_BASE);
if (ret) {
printf("FEC MXS: Unable to init FEC1\n");
return ret;
}
dev = eth_get_dev_by_name("FEC0");
if (!dev) {
printf("FEC MXS: Unable to get FEC0 device entry\n");
return -EINVAL;
}
ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
if (ret) {
printf("FEC MXS: Unable to register FEC0 mii postcall\n");
return ret;
}
dev = eth_get_dev_by_name("FEC1");
if (!dev) {
printf("FEC MXS: Unable to get FEC1 device entry\n");
return -EINVAL;
}
ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
if (ret) {
printf("FEC MXS: Unable to register FEC1 mii postcall\n");
return ret;
}
return ret;
}
#endif

View File

@ -1,205 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* ARIES M28 Boot setup
*
* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
* on behalf of DENX Software Engineering GmbH
*/
#include <common.h>
#include <config.h>
#include <asm/io.h>
#include <asm/arch/iomux-mx28.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
#define MUX_CONFIG_LED (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
#define MUX_CONFIG_LCD (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
#define MUX_CONFIG_TSC (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
#define MUX_CONFIG_SSP0 (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP)
#define MUX_CONFIG_SSP2 (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP)
#define MUX_CONFIG_GPMI (MXS_PAD_1V8 | MXS_PAD_4MA | MXS_PAD_NOPULL)
#define MUX_CONFIG_ENET (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP)
#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL)
const iomux_cfg_t iomux_setup[] = {
/* LED */
MX28_PAD_ENET0_RXD3__GPIO_4_10 | MUX_CONFIG_LED,
/* framebuffer */
MX28_PAD_LCD_D00__LCD_D0 | MUX_CONFIG_LCD,
MX28_PAD_LCD_D01__LCD_D1 | MUX_CONFIG_LCD,
MX28_PAD_LCD_D02__LCD_D2 | MUX_CONFIG_LCD,
MX28_PAD_LCD_D03__LCD_D3 | MUX_CONFIG_LCD,
MX28_PAD_LCD_D04__LCD_D4 | MUX_CONFIG_LCD,
MX28_PAD_LCD_D05__LCD_D5 | MUX_CONFIG_LCD,
MX28_PAD_LCD_D06__LCD_D6 | MUX_CONFIG_LCD,
MX28_PAD_LCD_D07__LCD_D7 | MUX_CONFIG_LCD,
MX28_PAD_LCD_D08__LCD_D8 | MUX_CONFIG_LCD,
MX28_PAD_LCD_D09__LCD_D9 | MUX_CONFIG_LCD,
MX28_PAD_LCD_D10__LCD_D10 | MUX_CONFIG_LCD,
MX28_PAD_LCD_D11__LCD_D11 | MUX_CONFIG_LCD,
MX28_PAD_LCD_D12__LCD_D12 | MUX_CONFIG_LCD,
MX28_PAD_LCD_D13__LCD_D13 | MUX_CONFIG_LCD,
MX28_PAD_LCD_D14__LCD_D14 | MUX_CONFIG_LCD,
MX28_PAD_LCD_D15__LCD_D15 | MUX_CONFIG_LCD,
MX28_PAD_LCD_D16__LCD_D16 | MUX_CONFIG_LCD,
MX28_PAD_LCD_D17__LCD_D17 | MUX_CONFIG_LCD,
MX28_PAD_LCD_D18__LCD_D18 | MUX_CONFIG_LCD,
MX28_PAD_LCD_D19__LCD_D19 | MUX_CONFIG_LCD,
MX28_PAD_LCD_D20__LCD_D20 | MUX_CONFIG_LCD,
MX28_PAD_LCD_D21__LCD_D21 | MUX_CONFIG_LCD,
MX28_PAD_LCD_D22__LCD_D22 | MUX_CONFIG_LCD,
MX28_PAD_LCD_D23__LCD_D23 | MUX_CONFIG_LCD,
MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | MUX_CONFIG_LCD,
MX28_PAD_LCD_ENABLE__LCD_ENABLE | MUX_CONFIG_LCD,
/* UART1 */
#ifdef CONFIG_ARIES_M28_V10
MX28_PAD_AUART0_CTS__DUART_RX,
MX28_PAD_AUART0_RTS__DUART_TX,
#else
MX28_PAD_PWM0__DUART_RX,
MX28_PAD_PWM1__DUART_TX,
#endif
MX28_PAD_AUART0_TX__DUART_RTS,
MX28_PAD_AUART0_RX__DUART_CTS,
/* UART2 */
MX28_PAD_AUART1_RX__AUART1_RX,
MX28_PAD_AUART1_TX__AUART1_TX,
MX28_PAD_AUART1_RTS__AUART1_RTS,
MX28_PAD_AUART1_CTS__AUART1_CTS,
/* CAN */
MX28_PAD_GPMI_RDY2__CAN0_TX,
MX28_PAD_GPMI_RDY3__CAN0_RX,
/* TSC2007 */
MX28_PAD_SAIF0_MCLK__GPIO_3_20 | MUX_CONFIG_TSC,
/* MMC0 */
MX28_PAD_SSP0_DATA0__SSP0_D0 | MUX_CONFIG_SSP0,
MX28_PAD_SSP0_DATA1__SSP0_D1 | MUX_CONFIG_SSP0,
MX28_PAD_SSP0_DATA2__SSP0_D2 | MUX_CONFIG_SSP0,
MX28_PAD_SSP0_DATA3__SSP0_D3 | MUX_CONFIG_SSP0,
MX28_PAD_SSP0_DATA4__SSP0_D4 | MUX_CONFIG_SSP0,
MX28_PAD_SSP0_DATA5__SSP0_D5 | MUX_CONFIG_SSP0,
MX28_PAD_SSP0_DATA6__SSP0_D6 | MUX_CONFIG_SSP0,
MX28_PAD_SSP0_DATA7__SSP0_D7 | MUX_CONFIG_SSP0,
MX28_PAD_SSP0_CMD__SSP0_CMD | MUX_CONFIG_SSP0,
MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
(MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),
MX28_PAD_SSP0_SCK__SSP0_SCK |
(MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),
MX28_PAD_PWM3__GPIO_3_28 | MUX_CONFIG_SSP0 |
(MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL), /* Power */
MX28_PAD_AUART2_CTS__GPIO_3_10, /* WP */
/* GPMI NAND */
MX28_PAD_GPMI_D00__GPMI_D0 | MUX_CONFIG_GPMI,
MX28_PAD_GPMI_D01__GPMI_D1 | MUX_CONFIG_GPMI,
MX28_PAD_GPMI_D02__GPMI_D2 | MUX_CONFIG_GPMI,
MX28_PAD_GPMI_D03__GPMI_D3 | MUX_CONFIG_GPMI,
MX28_PAD_GPMI_D04__GPMI_D4 | MUX_CONFIG_GPMI,
MX28_PAD_GPMI_D05__GPMI_D5 | MUX_CONFIG_GPMI,
MX28_PAD_GPMI_D06__GPMI_D6 | MUX_CONFIG_GPMI,
MX28_PAD_GPMI_D07__GPMI_D7 | MUX_CONFIG_GPMI,
MX28_PAD_GPMI_CE0N__GPMI_CE0N | MUX_CONFIG_GPMI,
MX28_PAD_GPMI_RDY0__GPMI_READY0 | MUX_CONFIG_GPMI,
MX28_PAD_GPMI_RDN__GPMI_RDN |
(MXS_PAD_1V8 | MXS_PAD_8MA | MXS_PAD_PULLUP),
MX28_PAD_GPMI_WRN__GPMI_WRN | MUX_CONFIG_GPMI,
MX28_PAD_GPMI_ALE__GPMI_ALE | MUX_CONFIG_GPMI,
MX28_PAD_GPMI_CLE__GPMI_CLE | MUX_CONFIG_GPMI,
MX28_PAD_GPMI_RESETN__GPMI_RESETN | MUX_CONFIG_GPMI,
/* FEC Ethernet */
MX28_PAD_ENET0_MDC__ENET0_MDC | MUX_CONFIG_ENET,
MX28_PAD_ENET0_MDIO__ENET0_MDIO | MUX_CONFIG_ENET,
MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MUX_CONFIG_ENET,
MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MUX_CONFIG_ENET,
MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MUX_CONFIG_ENET,
MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MUX_CONFIG_ENET,
MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MUX_CONFIG_ENET,
MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MUX_CONFIG_ENET,
MX28_PAD_ENET_CLK__CLKCTRL_ENET | MUX_CONFIG_ENET,
MX28_PAD_ENET0_COL__ENET1_TX_EN | MUX_CONFIG_ENET,
MX28_PAD_ENET0_CRS__ENET1_RX_EN | MUX_CONFIG_ENET,
MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MUX_CONFIG_ENET,
MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MUX_CONFIG_ENET,
MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MUX_CONFIG_ENET,
MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MUX_CONFIG_ENET,
#if !defined(CONFIG_ARIES_M28_V11) && !defined(CONFIG_ARIES_M28_V10)
MX28_PAD_AUART2_RTS__GPIO_3_11, /* PHY reset */
#endif
/* I2C */
MX28_PAD_I2C0_SCL__I2C0_SCL,
MX28_PAD_I2C0_SDA__I2C0_SDA,
/* EMI */
MX28_PAD_EMI_D00__EMI_DATA0 | MUX_CONFIG_EMI,
MX28_PAD_EMI_D01__EMI_DATA1 | MUX_CONFIG_EMI,
MX28_PAD_EMI_D02__EMI_DATA2 | MUX_CONFIG_EMI,
MX28_PAD_EMI_D03__EMI_DATA3 | MUX_CONFIG_EMI,
MX28_PAD_EMI_D04__EMI_DATA4 | MUX_CONFIG_EMI,
MX28_PAD_EMI_D05__EMI_DATA5 | MUX_CONFIG_EMI,
MX28_PAD_EMI_D06__EMI_DATA6 | MUX_CONFIG_EMI,
MX28_PAD_EMI_D07__EMI_DATA7 | MUX_CONFIG_EMI,
MX28_PAD_EMI_D08__EMI_DATA8 | MUX_CONFIG_EMI,
MX28_PAD_EMI_D09__EMI_DATA9 | MUX_CONFIG_EMI,
MX28_PAD_EMI_D10__EMI_DATA10 | MUX_CONFIG_EMI,
MX28_PAD_EMI_D11__EMI_DATA11 | MUX_CONFIG_EMI,
MX28_PAD_EMI_D12__EMI_DATA12 | MUX_CONFIG_EMI,
MX28_PAD_EMI_D13__EMI_DATA13 | MUX_CONFIG_EMI,
MX28_PAD_EMI_D14__EMI_DATA14 | MUX_CONFIG_EMI,
MX28_PAD_EMI_D15__EMI_DATA15 | MUX_CONFIG_EMI,
MX28_PAD_EMI_ODT0__EMI_ODT0 | MUX_CONFIG_EMI,
MX28_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI,
MX28_PAD_EMI_ODT1__EMI_ODT1 | MUX_CONFIG_EMI,
MX28_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI,
MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK | MUX_CONFIG_EMI,
MX28_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI,
MX28_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI,
MX28_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI,
MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN | MUX_CONFIG_EMI,
MX28_PAD_EMI_A00__EMI_ADDR0 | MUX_CONFIG_EMI,
MX28_PAD_EMI_A01__EMI_ADDR1 | MUX_CONFIG_EMI,
MX28_PAD_EMI_A02__EMI_ADDR2 | MUX_CONFIG_EMI,
MX28_PAD_EMI_A03__EMI_ADDR3 | MUX_CONFIG_EMI,
MX28_PAD_EMI_A04__EMI_ADDR4 | MUX_CONFIG_EMI,
MX28_PAD_EMI_A05__EMI_ADDR5 | MUX_CONFIG_EMI,
MX28_PAD_EMI_A06__EMI_ADDR6 | MUX_CONFIG_EMI,
MX28_PAD_EMI_A07__EMI_ADDR7 | MUX_CONFIG_EMI,
MX28_PAD_EMI_A08__EMI_ADDR8 | MUX_CONFIG_EMI,
MX28_PAD_EMI_A09__EMI_ADDR9 | MUX_CONFIG_EMI,
MX28_PAD_EMI_A10__EMI_ADDR10 | MUX_CONFIG_EMI,
MX28_PAD_EMI_A11__EMI_ADDR11 | MUX_CONFIG_EMI,
MX28_PAD_EMI_A12__EMI_ADDR12 | MUX_CONFIG_EMI,
MX28_PAD_EMI_A13__EMI_ADDR13 | MUX_CONFIG_EMI,
MX28_PAD_EMI_A14__EMI_ADDR14 | MUX_CONFIG_EMI,
MX28_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI,
MX28_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI,
MX28_PAD_EMI_BA2__EMI_BA2 | MUX_CONFIG_EMI,
MX28_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI,
MX28_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI,
MX28_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI,
MX28_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI,
MX28_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI,
MX28_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI,
/* SPI2 (for flash) */
MX28_PAD_SSP2_SCK__SSP2_SCK | MUX_CONFIG_SSP2,
MX28_PAD_SSP2_MOSI__SSP2_CMD | MUX_CONFIG_SSP2,
MX28_PAD_SSP2_MISO__SSP2_D0 | MUX_CONFIG_SSP2,
MX28_PAD_SSP2_SS0__SSP2_D3 |
(MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP),
};
void board_init_ll(const uint32_t arg, const uint32_t *resptr)
{
mxs_common_spl_init(arg, resptr, iomux_setup, ARRAY_SIZE(iomux_setup));
}

View File

@ -1,15 +0,0 @@
if TARGET_M53EVK
config SYS_BOARD
default "m53evk"
config SYS_VENDOR
default "aries"
config SYS_SOC
default "mx5"
config SYS_CONFIG_NAME
default "m53evk"
endif

View File

@ -1,6 +0,0 @@
M53EVK BOARD
#M: Marek Vasut <marek.vasut@gmail.com>
S: Orphan (since 2017-07)
F: board/aries/m53evk/
F: include/configs/m53evk.h
F: configs/m53evk_defconfig

View File

@ -1,6 +0,0 @@
# SPDX-License-Identifier: GPL-2.0+
#
# Aries M53EVK
# Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
obj-y := m53evk.o

View File

@ -1,91 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Aries M53 DRAM init values
* Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
*
* Refer doc/README.imximage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
*/
#include <asm/mach-imx/imximage.cfg>
/* image version */
IMAGE_VERSION 2
/* Boot Offset 0x400, valid for both SD and NAND boot. */
BOOT_OFFSET FLASH_OFFSET_STANDARD
/*
* Device Configuration Data (DCD)
*
* Each entry must have the format:
* Addr-type Address Value
*
* where:
* Addr-type register length (1,2 or 4 bytes)
* Address absolute address of the register
* value value to be stored in the register
*/
DATA 4 0x53fa86f4 0x00000000 /* GRP_DDRMODE_CTL */
DATA 4 0x53fa8714 0x00000000 /* GRP_DDRMODE */
DATA 4 0x53fa86fc 0x00000000 /* GRP_DDRPKE */
DATA 4 0x53fa8724 0x04000000 /* GRP_DDR_TYPE */
DATA 4 0x53fa872c 0x00300000 /* GRP_B3DS */
DATA 4 0x53fa8554 0x00300000 /* DRAM_DQM3 */
DATA 4 0x53fa8558 0x00300040 /* DRAM_SDQS3 */
DATA 4 0x53fa8728 0x00300000 /* GRP_B2DS */
DATA 4 0x53fa8560 0x00300000 /* DRAM_DQM2 */
DATA 4 0x53fa8568 0x00300040 /* DRAM_SDQS2 */
DATA 4 0x53fa871c 0x00300000 /* GRP_B1DS */
DATA 4 0x53fa8594 0x00300000 /* DRAM_DQM1 */
DATA 4 0x53fa8590 0x00300040 /* DRAM_SDQS1 */
DATA 4 0x53fa8718 0x00300000 /* GRP_B0DS */
DATA 4 0x53fa8584 0x00300000 /* DRAM_DQM0 */
DATA 4 0x53fa857c 0x00300040 /* DRAM_SDQS0 */
DATA 4 0x53fa8578 0x00300000 /* DRAM_SDCLK_0 */
DATA 4 0x53fa8570 0x00300000 /* DRAM_SDCLK_1 */
DATA 4 0x53fa8574 0x00300000 /* DRAM_CAS */
DATA 4 0x53fa8588 0x00300000 /* DRAM_RAS */
DATA 4 0x53fa86f0 0x00300000 /* GRP_ADDDS */
DATA 4 0x53fa8720 0x00300000 /* GRP_CTLDS */
DATA 4 0x53fa8564 0x00300040 /* DRAM_SDODT1 */
DATA 4 0x53fa8580 0x00300040 /* DRAM_SDODT0 */
/* ESDCTL */
DATA 4 0x63fd9088 0x32383535
DATA 4 0x63fd9090 0x40383538
DATA 4 0x63fd907c 0x0136014d
DATA 4 0x63fd9080 0x01510141
DATA 4 0x63fd9018 0x00011740
DATA 4 0x63fd9000 0xc3190000
DATA 4 0x63fd900c 0x555952e3
DATA 4 0x63fd9010 0xb68e8b63
DATA 4 0x63fd9014 0x01ff00db
DATA 4 0x63fd902c 0x000026d2
DATA 4 0x63fd9030 0x009f0e21
DATA 4 0x63fd9008 0x12273030
DATA 4 0x63fd9004 0x0002002d
DATA 4 0x63fd901c 0x00008032
DATA 4 0x63fd901c 0x00008033
DATA 4 0x63fd901c 0x00028031
DATA 4 0x63fd901c 0x092080b0
DATA 4 0x63fd901c 0x04008040
DATA 4 0x63fd901c 0x0000803a
DATA 4 0x63fd901c 0x0000803b
DATA 4 0x63fd901c 0x00028039
DATA 4 0x63fd901c 0x09208138
DATA 4 0x63fd901c 0x04008048
DATA 4 0x63fd9020 0x00001800
DATA 4 0x63fd9040 0x04b80003
DATA 4 0x63fd9058 0x00022227
DATA 4 0x63fd901c 0x00000000

View File

@ -1,364 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Aries M53 module
*
* Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/clock.h>
#include <asm/arch/iomux-mx53.h>
#include <asm/mach-imx/mx5_video.h>
#include <asm/spl.h>
#include <linux/errno.h>
#include <netdev.h>
#include <i2c.h>
#include <mmc.h>
#include <spl.h>
#include <fsl_esdhc.h>
#include <asm/gpio.h>
#include <usb/ehci-ci.h>
#include <linux/fb.h>
#include <ipu_pixfmt.h>
/* Special MXCFB sync flags are here. */
#include "../drivers/video/mxcfb.h"
DECLARE_GLOBAL_DATA_PTR;
static void setup_iomux_uart(void)
{
static const iomux_v3_cfg_t uart_pads[] = {
MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
};
imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
}
#ifdef CONFIG_USB_EHCI_MX5
int board_ehci_hcd_init(int port)
{
if (port == 0) {
/* USB OTG PWRON */
imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_4__GPIO1_4,
PAD_CTL_PKE | PAD_CTL_DSE_HIGH));
gpio_direction_output(IMX_GPIO_NR(1, 4), 0);
/* USB OTG Over Current */
imx_iomux_v3_setup_pad(MX53_PAD_GPIO_18__GPIO7_13);
} else if (port == 1) {
/* USB Host PWRON */
imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_2__GPIO1_2,
PAD_CTL_PKE | PAD_CTL_DSE_HIGH));
gpio_direction_output(IMX_GPIO_NR(1, 2), 0);
/* USB Host Over Current */
imx_iomux_v3_setup_pad(MX53_PAD_GPIO_3__USBOH3_USBH1_OC);
}
return 0;
}
#endif
static void setup_iomux_fec(void)
{
static const iomux_v3_cfg_t fec_pads[] = {
/* MDIO pads */
NEW_PAD_CTRL(MX53_PAD_FEC_MDIO__FEC_MDIO, PAD_CTL_HYS |
PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP | PAD_CTL_ODE),
NEW_PAD_CTRL(MX53_PAD_FEC_MDC__FEC_MDC, PAD_CTL_DSE_HIGH),
/* FEC 0 pads */
NEW_PAD_CTRL(MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
PAD_CTL_HYS | PAD_CTL_PKE),
NEW_PAD_CTRL(MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
PAD_CTL_HYS | PAD_CTL_PKE),
NEW_PAD_CTRL(MX53_PAD_FEC_RX_ER__FEC_RX_ER,
PAD_CTL_HYS | PAD_CTL_PKE),
NEW_PAD_CTRL(MX53_PAD_FEC_TX_EN__FEC_TX_EN, PAD_CTL_DSE_HIGH),
NEW_PAD_CTRL(MX53_PAD_FEC_RXD0__FEC_RDATA_0,
PAD_CTL_HYS | PAD_CTL_PKE),
NEW_PAD_CTRL(MX53_PAD_FEC_RXD1__FEC_RDATA_1,
PAD_CTL_HYS | PAD_CTL_PKE),
NEW_PAD_CTRL(MX53_PAD_FEC_TXD0__FEC_TDATA_0, PAD_CTL_DSE_HIGH),
NEW_PAD_CTRL(MX53_PAD_FEC_TXD1__FEC_TDATA_1, PAD_CTL_DSE_HIGH),
/* FEC 1 pads */
NEW_PAD_CTRL(MX53_PAD_KEY_COL0__FEC_RDATA_3,
PAD_CTL_HYS | PAD_CTL_PKE),
NEW_PAD_CTRL(MX53_PAD_KEY_ROW0__FEC_TX_ER,
PAD_CTL_HYS | PAD_CTL_PKE),
NEW_PAD_CTRL(MX53_PAD_KEY_COL1__FEC_RX_CLK,
PAD_CTL_HYS | PAD_CTL_PKE),
NEW_PAD_CTRL(MX53_PAD_KEY_ROW1__FEC_COL,
PAD_CTL_HYS | PAD_CTL_PKE),
NEW_PAD_CTRL(MX53_PAD_KEY_COL2__FEC_RDATA_2,
PAD_CTL_HYS | PAD_CTL_PKE),
NEW_PAD_CTRL(MX53_PAD_KEY_ROW2__FEC_TDATA_2, PAD_CTL_DSE_HIGH),
NEW_PAD_CTRL(MX53_PAD_KEY_COL3__FEC_CRS,
PAD_CTL_HYS | PAD_CTL_PKE),
NEW_PAD_CTRL(MX53_PAD_GPIO_19__FEC_TDATA_3, PAD_CTL_DSE_HIGH),
};
imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
}
#ifdef CONFIG_FSL_ESDHC
struct fsl_esdhc_cfg esdhc_cfg = {
MMC_SDHC1_BASE_ADDR,
};
int board_mmc_getcd(struct mmc *mmc)
{
imx_iomux_v3_setup_pad(MX53_PAD_GPIO_1__GPIO1_1);
gpio_direction_input(IMX_GPIO_NR(1, 1));
return !gpio_get_value(IMX_GPIO_NR(1, 1));
}
#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
PAD_CTL_PUS_100K_UP)
#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \
PAD_CTL_DSE_HIGH)
int board_mmc_init(bd_t *bis)
{
static const iomux_v3_cfg_t sd1_pads[] = {
NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL),
NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL),
NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL),
NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL),
NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL),
NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL),
MX53_PAD_EIM_DA13__GPIO3_13,
MX53_PAD_EIM_EB3__GPIO2_31, /* SD power */
};
esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
imx_iomux_v3_setup_multiple_pads(sd1_pads, ARRAY_SIZE(sd1_pads));
/* GPIO 2_31 is SD power */
gpio_direction_output(IMX_GPIO_NR(2, 31), 0);
return fsl_esdhc_initialize(bis, &esdhc_cfg);
}
#endif
#ifdef CONFIG_VIDEO
static struct fb_videomode const ampire_wvga = {
.name = "Ampire",
.refresh = 60,
.xres = 800,
.yres = 480,
.pixclock = 29851, /* picosecond (33.5 MHz) */
.left_margin = 89,
.right_margin = 164,
.upper_margin = 23,
.lower_margin = 10,
.hsync_len = 10,
.vsync_len = 10,
.sync = FB_SYNC_CLK_LAT_FALL,
};
int board_video_skip(void)
{
int ret;
ret = ipuv3_fb_init(&ampire_wvga, 1, IPU_PIX_FMT_RGB666);
if (ret)
printf("Ampire LCD cannot be configured: %d\n", ret);
return ret;
}
#endif
#define I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
static void setup_iomux_i2c(void)
{
static const iomux_v3_cfg_t i2c_pads[] = {
NEW_PAD_CTRL(MX53_PAD_EIM_D16__I2C2_SDA, I2C_PAD_CTRL),
NEW_PAD_CTRL(MX53_PAD_EIM_EB2__I2C2_SCL, I2C_PAD_CTRL),
};
imx_iomux_v3_setup_multiple_pads(i2c_pads, ARRAY_SIZE(i2c_pads));
}
static void setup_iomux_video(void)
{
static const iomux_v3_cfg_t lcd_pads[] = {
MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0,
MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1,
MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2,
MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3,
MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4,
MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5,
MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6,
MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7,
MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8,
MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9,
MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10,
MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11,
MX53_PAD_EIM_A17__IPU_DISP1_DAT_12,
MX53_PAD_EIM_A18__IPU_DISP1_DAT_13,
MX53_PAD_EIM_A19__IPU_DISP1_DAT_14,
MX53_PAD_EIM_A20__IPU_DISP1_DAT_15,
MX53_PAD_EIM_A21__IPU_DISP1_DAT_16,
MX53_PAD_EIM_A22__IPU_DISP1_DAT_17,
MX53_PAD_EIM_A23__IPU_DISP1_DAT_18,
MX53_PAD_EIM_A24__IPU_DISP1_DAT_19,
MX53_PAD_EIM_D31__IPU_DISP1_DAT_20,
MX53_PAD_EIM_D30__IPU_DISP1_DAT_21,
MX53_PAD_EIM_D26__IPU_DISP1_DAT_22,
MX53_PAD_EIM_D27__IPU_DISP1_DAT_23,
MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK,
MX53_PAD_EIM_DA13__IPU_DI1_D0_CS,
MX53_PAD_EIM_DA14__IPU_DI1_D1_CS,
MX53_PAD_EIM_DA15__IPU_DI1_PIN1,
MX53_PAD_EIM_DA11__IPU_DI1_PIN2,
MX53_PAD_EIM_DA12__IPU_DI1_PIN3,
MX53_PAD_EIM_A25__IPU_DI1_PIN12,
MX53_PAD_EIM_DA10__IPU_DI1_PIN15,
};
imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
}
static void setup_iomux_nand(void)
{
static const iomux_v3_cfg_t nand_pads[] = {
NEW_PAD_CTRL(MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B,
PAD_CTL_DSE_HIGH),
NEW_PAD_CTRL(MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B,
PAD_CTL_DSE_HIGH),
NEW_PAD_CTRL(MX53_PAD_NANDF_CLE__EMI_NANDF_CLE,
PAD_CTL_DSE_HIGH),
NEW_PAD_CTRL(MX53_PAD_NANDF_ALE__EMI_NANDF_ALE,
PAD_CTL_DSE_HIGH),
NEW_PAD_CTRL(MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B,
PAD_CTL_PUS_100K_UP),
NEW_PAD_CTRL(MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0,
PAD_CTL_PUS_100K_UP),
NEW_PAD_CTRL(MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0,
PAD_CTL_DSE_HIGH),
NEW_PAD_CTRL(MX53_PAD_PATA_DATA0__EMI_NANDF_D_0,
PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
NEW_PAD_CTRL(MX53_PAD_PATA_DATA1__EMI_NANDF_D_1,
PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
NEW_PAD_CTRL(MX53_PAD_PATA_DATA2__EMI_NANDF_D_2,
PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
NEW_PAD_CTRL(MX53_PAD_PATA_DATA3__EMI_NANDF_D_3,
PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
NEW_PAD_CTRL(MX53_PAD_PATA_DATA4__EMI_NANDF_D_4,
PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
NEW_PAD_CTRL(MX53_PAD_PATA_DATA5__EMI_NANDF_D_5,
PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
NEW_PAD_CTRL(MX53_PAD_PATA_DATA6__EMI_NANDF_D_6,
PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
NEW_PAD_CTRL(MX53_PAD_PATA_DATA7__EMI_NANDF_D_7,
PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
};
imx_iomux_v3_setup_multiple_pads(nand_pads, ARRAY_SIZE(nand_pads));
}
static void m53_set_clock(void)
{
int ret;
const uint32_t ref_clk = MXC_HCLK;
const uint32_t dramclk = 400;
uint32_t cpuclk;
imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_10__GPIO4_0,
PAD_CTL_DSE_HIGH | PAD_CTL_PKE));
gpio_direction_input(IMX_GPIO_NR(4, 0));
/* GPIO10 selects modules' CPU speed, 1 = 1200MHz ; 0 = 800MHz */
cpuclk = gpio_get_value(IMX_GPIO_NR(4, 0)) ? 1200 : 800;
ret = mxc_set_clock(ref_clk, cpuclk, MXC_ARM_CLK);
if (ret)
printf("CPU: Switch CPU clock to %dMHz failed\n", cpuclk);
ret = mxc_set_clock(ref_clk, dramclk, MXC_PERIPH_CLK);
if (ret) {
printf("CPU: Switch peripheral clock to %dMHz failed\n",
dramclk);
}
ret = mxc_set_clock(ref_clk, dramclk, MXC_DDR_CLK);
if (ret)
printf("CPU: Switch DDR clock to %dMHz failed\n", dramclk);
}
static void m53_set_nand(void)
{
u32 i;
/* NAND flash is muxed on ATA pins */
setbits_le32(M4IF_BASE_ADDR + 0xc, M4IF_GENP_WEIM_MM_MASK);
/* Wait for Grant/Ack sequence (see EIM_CSnGCR2:MUX16_BYP_GRANT) */
for (i = 0x4; i < 0x94; i += 0x18) {
clrbits_le32(WEIM_BASE_ADDR + i,
WEIM_GCR2_MUX16_BYP_GRANT_MASK);
}
mxc_set_clock(0, 33, MXC_NFC_CLK);
enable_nfc_clk(1);
}
int board_early_init_f(void)
{
setup_iomux_uart();
setup_iomux_fec();
setup_iomux_i2c();
setup_iomux_nand();
setup_iomux_video();
m53_set_clock();
mxc_set_sata_internal_clock();
/* NAND clock @ 33MHz */
m53_set_nand();
return 0;
}
int board_init(void)
{
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
return 0;
}
int checkboard(void)
{
puts("Board: Aries M53EVK\n");
return 0;
}
/*
* NAND SPL
*/
#ifdef CONFIG_SPL_BUILD
void spl_board_init(void)
{
setup_iomux_nand();
m53_set_clock();
m53_set_nand();
}
u32 spl_boot_device(void)
{
return BOOT_DEVICE_NAND;
}
#endif

View File

@ -1,12 +0,0 @@
if TARGET_MA5D4EVK
config SYS_BOARD
default "ma5d4evk"
config SYS_VENDOR
default "aries"
config SYS_CONFIG_NAME
default "ma5d4evk"
endif

View File

@ -1,6 +0,0 @@
Aries MA5D4EVK BOARD
#M: Marek Vasut <marek.vasut@gmail.com>
S: Orphan (since 2017-07)
F: board/aries/ma5d4evk/
F: include/configs/ma5d4evk.h
F: configs/ma5d4evk_defconfig

View File

@ -1,5 +0,0 @@
# SPDX-License-Identifier: GPL-2.0+
#
# Copyright (C) 2015 Marek Vasut <marex@denx.de>
obj-y += ma5d4evk.o

View File

@ -1,456 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2015 Marek Vasut <marex@denx.de>
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_rstc.h>
#include <asm/arch/atmel_mpddrc.h>
#include <asm/arch/atmel_usba_udc.h>
#include <asm/arch/gpio.h>
#include <asm/arch/clk.h>
#include <asm/arch/sama5d3_smc.h>
#include <asm/arch/sama5d4.h>
#include <atmel_hlcdc.h>
#include <atmel_mci.h>
#include <lcd.h>
#include <mmc.h>
#include <net.h>
#include <netdev.h>
#include <spi.h>
#include <spi_flash.h>
#include <spl.h>
#include <version.h>
DECLARE_GLOBAL_DATA_PTR;
static u8 boot_mode_sf;
/* FIXME gpio code here need to handle through DM_GPIO */
#ifndef CONFIG_DM_SPI
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
{
return bus == 0 && cs == 0;
}
void spi_cs_activate(struct spi_slave *slave)
{
at91_set_pio_output(AT91_PIO_PORTC, 3, 0);
}
void spi_cs_deactivate(struct spi_slave *slave)
{
at91_set_pio_output(AT91_PIO_PORTC, 3, 1);
}
static void ma5d4evk_spi0_hw_init(void)
{
at91_pio3_set_a_periph(AT91_PIO_PORTC, 0, 0); /* SPI0_MISO */
at91_pio3_set_a_periph(AT91_PIO_PORTC, 1, 0); /* SPI0_MOSI */
at91_pio3_set_a_periph(AT91_PIO_PORTC, 2, 0); /* SPI0_SPCK */
at91_set_pio_output(AT91_PIO_PORTC, 3, 1); /* SPI0_CS0 */
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_SPI0);
}
#endif /* CONFIG_DM_SPI */
#ifdef CONFIG_CMD_USB
static void ma5d4evk_usb_hw_init(void)
{
at91_set_pio_output(AT91_PIO_PORTE, 11, 0);
at91_set_pio_output(AT91_PIO_PORTE, 14, 0);
}
#endif
#ifdef CONFIG_LCD
vidinfo_t panel_info = {
.vl_col = 800,
.vl_row = 480,
.vl_clk = 33500000,
.vl_bpix = LCD_BPP,
.vl_tft = 1,
.vl_hsync_len = 10,
.vl_left_margin = 89,
.vl_right_margin = 164,
.vl_vsync_len = 10,
.vl_upper_margin = 23,
.vl_lower_margin = 10,
.mmio = ATMEL_BASE_LCDC,
};
/* No power up/down pin for the LCD pannel */
void lcd_enable(void) { /* Empty! */ }
void lcd_disable(void) { /* Empty! */ }
unsigned int has_lcdc(void)
{
return 1;
}
static void ma5d4evk_lcd_hw_init(void)
{
at91_pio3_set_a_periph(AT91_PIO_PORTA, 24, 1); /* LCDPWM */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 29, 1); /* LCDDEN */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD9 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD8 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 16, 0); /* LCDD16 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 17, 0); /* LCDD17 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 18, 0); /* LCDD18 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 19, 0); /* LCDD19 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 20, 0); /* LCDD20 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 21, 0); /* LCDD21 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 22, 0); /* LCDD22 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 23, 0); /* LCDD23 */
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_LCDC);
}
#endif /* CONFIG_LCD */
#ifdef CONFIG_GENERIC_ATMEL_MCI
/* On-SoM eMMC */
void ma5d4evk_mci0_hw_init(void)
{
at91_pio3_set_b_periph(AT91_PIO_PORTC, 5, 1); /* MCI1 CDA */
at91_pio3_set_b_periph(AT91_PIO_PORTC, 6, 1); /* MCI1 DA0 */
at91_pio3_set_b_periph(AT91_PIO_PORTC, 7, 1); /* MCI1 DA1 */
at91_pio3_set_b_periph(AT91_PIO_PORTC, 8, 1); /* MCI1 DA2 */
at91_pio3_set_b_periph(AT91_PIO_PORTC, 9, 1); /* MCI1 DA3 */
at91_pio3_set_b_periph(AT91_PIO_PORTC, 10, 1); /* MCI1 DA4 */
at91_pio3_set_b_periph(AT91_PIO_PORTC, 11, 1); /* MCI1 DA5 */
at91_pio3_set_b_periph(AT91_PIO_PORTC, 12, 1); /* MCI1 DA6 */
at91_pio3_set_b_periph(AT91_PIO_PORTC, 13, 1); /* MCI1 DA7 */
at91_pio3_set_b_periph(AT91_PIO_PORTC, 4, 0); /* MCI1 CLK */
/*
* As the mci io internal pull down is too strong, so if the io needs
* external pull up, the pull up resistor will be very small, if so
* the power consumption will increase, so disable the internal pull
* down to save the power.
*/
at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 5, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 6, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 7, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 8, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 9, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 10, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 11, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 12, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 13, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 4, 0);
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_MCI0);
}
/* On-board MicroSD slot */
void ma5d4evk_mci1_hw_init(void)
{
at91_pio3_set_c_periph(AT91_PIO_PORTE, 19, 1); /* MCI1 CDA */
at91_pio3_set_c_periph(AT91_PIO_PORTE, 20, 1); /* MCI1 DA0 */
at91_pio3_set_c_periph(AT91_PIO_PORTE, 21, 1); /* MCI1 DA1 */
at91_pio3_set_c_periph(AT91_PIO_PORTE, 22, 1); /* MCI1 DA2 */
at91_pio3_set_c_periph(AT91_PIO_PORTE, 23, 1); /* MCI1 DA3 */
at91_pio3_set_c_periph(AT91_PIO_PORTE, 18, 0); /* MCI1 CLK */
/*
* As the mci io internal pull down is too strong, so if the io needs
* external pull up, the pull up resistor will be very small, if so
* the power consumption will increase, so disable the internal pull
* down to save the power.
*/
at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 18, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 19, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 20, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 21, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 22, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 23, 0);
/* Deal with WP pin on the microSD slot. */
at91_set_pio_output(AT91_PIO_PORTE, 16, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 16, 1);
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_MCI1);
}
int board_mmc_init(bd_t *bis)
{
int ret;
void *mci0 = (void *)ATMEL_BASE_MCI0;
void *mci1 = (void *)ATMEL_BASE_MCI1;
/* De-assert reset on On-SoM eMMC */
at91_set_pio_output(AT91_PIO_PORTE, 15, 1);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 15, 0);
ret = atmel_mci_init(boot_mode_sf ? mci0 : mci1);
if (ret) /* eMMC init failed, skip it. */
at91_set_pio_output(AT91_PIO_PORTE, 15, 0);
/* Enable the power supply to On-board MicroSD */
at91_set_pio_output(AT91_PIO_PORTE, 17, 0);
ret = atmel_mci_init(boot_mode_sf ? mci1 : mci0);
if (ret) /* uSD init failed, power it down. */
at91_set_pio_output(AT91_PIO_PORTE, 17, 1);
return 0;
}
#endif /* CONFIG_GENERIC_ATMEL_MCI */
#ifdef CONFIG_MACB
void ma5d4evk_macb0_hw_init(void)
{
at91_pio3_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ETXCK_EREFCK */
at91_pio3_set_a_periph(AT91_PIO_PORTB, 6, 0); /* ERXDV */
at91_pio3_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ERX0 */
at91_pio3_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ERX1 */
at91_pio3_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ERXER */
at91_pio3_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ETXEN */
at91_pio3_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX0 */
at91_pio3_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ETX1 */
at91_pio3_set_a_periph(AT91_PIO_PORTB, 17, 0); /* EMDIO */
at91_pio3_set_a_periph(AT91_PIO_PORTB, 16, 0); /* EMDC */
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_GMAC0);
}
#endif
static void ma5d4evk_serial_hw_init(void)
{
/* USART0 */
at91_pio3_set_a_periph(AT91_PIO_PORTD, 13, 1); /* TXD */
at91_pio3_set_a_periph(AT91_PIO_PORTD, 12, 0); /* RXD */
at91_pio3_set_a_periph(AT91_PIO_PORTD, 11, 0); /* RTS */
at91_pio3_set_a_periph(AT91_PIO_PORTD, 10, 0); /* CTS */
at91_periph_clk_enable(ATMEL_ID_USART0);
/* USART1 */
at91_pio3_set_a_periph(AT91_PIO_PORTD, 17, 1); /* TXD */
at91_pio3_set_a_periph(AT91_PIO_PORTD, 16, 0); /* RXD */
at91_pio3_set_a_periph(AT91_PIO_PORTD, 15, 0); /* RTS */
at91_pio3_set_a_periph(AT91_PIO_PORTD, 14, 0); /* CTS */
at91_periph_clk_enable(ATMEL_ID_USART1);
}
int board_early_init_f(void)
{
at91_periph_clk_enable(ATMEL_ID_PIOA);
at91_periph_clk_enable(ATMEL_ID_PIOB);
at91_periph_clk_enable(ATMEL_ID_PIOC);
at91_periph_clk_enable(ATMEL_ID_PIOD);
at91_periph_clk_enable(ATMEL_ID_PIOE);
/* Configure LEDs as OFF */
at91_set_pio_output(AT91_PIO_PORTD, 28, 0);
at91_set_pio_output(AT91_PIO_PORTD, 29, 0);
at91_set_pio_output(AT91_PIO_PORTD, 30, 0);
ma5d4evk_serial_hw_init();
return 0;
}
static void board_identify(void)
{
struct spi_flash *sf;
sf = spi_flash_probe(CONFIG_SF_DEFAULT_BUS, CONFIG_SF_DEFAULT_CS,
CONFIG_SF_DEFAULT_SPEED, CONFIG_SF_DEFAULT_MODE);
boot_mode_sf = (sf != NULL);
}
int board_init(void)
{
/* adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
#ifndef CONFIG_DM_SPI
ma5d4evk_spi0_hw_init();
#endif
#ifdef CONFIG_GENERIC_ATMEL_MCI
ma5d4evk_mci0_hw_init();
ma5d4evk_mci1_hw_init();
#endif
#ifdef CONFIG_MACB
ma5d4evk_macb0_hw_init();
#endif
#ifdef CONFIG_LCD
ma5d4evk_lcd_hw_init();
#endif
#ifdef CONFIG_CMD_USB
ma5d4evk_usb_hw_init();
#endif
#ifdef CONFIG_USB_GADGET_ATMEL_USBA
at91_udp_hw_init();
#endif
board_identify();
/* Reset CAN controllers */
at91_set_pio_output(AT91_PIO_PORTB, 21, 0);
udelay(100);
at91_set_pio_output(AT91_PIO_PORTB, 21, 1);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTB, 21, 0);
return 0;
}
int board_late_init(void)
{
env_set("bootmode", boot_mode_sf ? "sf" : "emmc");
return 0;
}
int dram_init(void)
{
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
CONFIG_SYS_SDRAM_SIZE);
return 0;
}
int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_MACB
rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC0, 0x00);
#endif
#ifdef CONFIG_USB_GADGET_ATMEL_USBA
usba_udc_probe(&pdata);
#ifdef CONFIG_USB_ETH_RNDIS
usb_eth_initialize(bis);
#endif
#endif
return rc;
}
/* SPL */
#ifdef CONFIG_SPL_BUILD
void spl_board_init(void)
{
#ifndef CONFIG_DM_SPI
ma5d4evk_spi0_hw_init();
#endif
#ifdef CONFIG_GENERIC_ATMEL_MCI
ma5d4evk_mci0_hw_init();
ma5d4evk_mci1_hw_init();
#endif
board_identify();
}
void board_boot_order(u32 *spl_boot_list)
{
spl_boot_list[0] = spl_boot_device();
switch (spl_boot_list[0]) {
case BOOT_DEVICE_MMC1:
case BOOT_DEVICE_MMC2:
spl_boot_list[0] = BOOT_DEVICE_MMC1;
break;
case BOOT_DEVICE_SPI:
break;
case BOOT_DEVICE_USB:
spl_boot_list[0] = BOOT_DEVICE_MMC2;
break;
}
}
static void ddr2_conf(struct atmel_mpddrc_config *ddr2)
{
ddr2->md = (ATMEL_MPDDRC_MD_DBW_32_BITS | ATMEL_MPDDRC_MD_DDR2_SDRAM);
ddr2->cr = (ATMEL_MPDDRC_CR_NC_COL_10 |
ATMEL_MPDDRC_CR_NR_ROW_13 |
ATMEL_MPDDRC_CR_CAS_DDR_CAS3 |
ATMEL_MPDDRC_CR_NB_8BANKS |
ATMEL_MPDDRC_CR_NDQS_DISABLED |
ATMEL_MPDDRC_CR_UNAL_SUPPORTED);
ddr2->rtr = 0x2b0;
ddr2->tpr0 = (8 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET |
3 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET |
3 << ATMEL_MPDDRC_TPR0_TWR_OFFSET |
10 << ATMEL_MPDDRC_TPR0_TRC_OFFSET |
3 << ATMEL_MPDDRC_TPR0_TRP_OFFSET |
2 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET |
2 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET |
2 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET);
ddr2->tpr1 = (2 << ATMEL_MPDDRC_TPR1_TXP_OFFSET |
200 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET |
25 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET |
23 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET);
ddr2->tpr2 = (7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET |
2 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET |
3 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET |
2 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET |
8 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET);
}
void mem_init(void)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
struct atmel_mpddrc_config ddr2;
ddr2_conf(&ddr2);
/* enable MPDDR clock */
at91_periph_clk_enable(ATMEL_ID_MPDDRC);
writel(AT91_PMC_DDR, &pmc->scer);
/* DDRAM2 Controller initialize */
ddr2_init(ATMEL_BASE_MPDDRC, ATMEL_BASE_DDRCS, &ddr2);
}
void at91_pmc_init(void)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
u32 tmp;
tmp = AT91_PMC_PLLAR_29 |
AT91_PMC_PLLXR_PLLCOUNT(0x3f) |
AT91_PMC_PLLXR_MUL(87) |
AT91_PMC_PLLXR_DIV(1);
at91_plla_init(tmp);
writel(0x0 << 8, &pmc->pllicpr);
tmp = AT91_PMC_MCKR_H32MXDIV |
AT91_PMC_MCKR_PLLADIV_2 |
AT91_PMC_MCKR_MDIV_3 |
AT91_PMC_MCKR_CSS_PLLA;
at91_mck_init(tmp);
}
#endif

View File

@ -1,5 +0,0 @@
Aries MCVEVK BOARD
#M: Marek Vasut <marek.vasut@gmail.com>
S: Orphan (since 2017-07)
F: include/configs/socfpga_mcvevk.h
F: configs/socfpga_mcvevk_defconfig

View File

@ -1,7 +0,0 @@
# SPDX-License-Identifier: GPL-2.0+
#
# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
# (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
obj-y := socfpga.o

View File

@ -1,659 +0,0 @@
/* SPDX-License-Identifier: BSD-3-Clause */
/*
* Altera SoCFPGA IOCSR configuration
*/
#ifndef __SOCFPGA_IOCSR_CONFIG_H__
#define __SOCFPGA_IOCSR_CONFIG_H__
#define CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH 764
#define CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH 1719
#define CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH 955
#define CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH 16766
const unsigned long iocsr_scan_chain0_table[] = {
0x00000000,
0x00000000,
0x0FF00000,
0xC0000000,
0x0000003F,
0x00008000,
0x00000000,
0x18060000,
0x00000060,
0x00000000,
0x00000000,
0x00004000,
0x0C0300C0,
0x00000000,
0x0C000000,
0x0000C030,
0x0000C030,
0x00002000,
0x06018060,
0x06018000,
0x06000018,
0x00006018,
0x01806018,
0x00001000,
};
const unsigned long iocsr_scan_chain1_table[] = {
0x000C0300,
0x300C0000,
0x300000C0,
0x000000C0,
0x000300C0,
0x00008000,
0x00060180,
0x18060000,
0x18000000,
0x00000060,
0x00018060,
0x00004000,
0x000300C0,
0x0C030000,
0x0C000000,
0x00000030,
0x0000C030,
0x00002000,
0x00018060,
0x06018000,
0x01FE0000,
0xF8000000,
0x00000007,
0x00001000,
0x0300C030,
0x00000000,
0x03000000,
0x0000000C,
0x00000000,
0x00000800,
0x00006018,
0x01806000,
0x00000000,
0x00000000,
0x00001806,
0x00000400,
0x0000300C,
0x00C03000,
0x00C00000,
0x00000003,
0x00000C03,
0x00000200,
0x00001806,
0x00601800,
0x80600000,
0x80000001,
0x00000601,
0x00000100,
0x00001000,
0x00300C00,
0xC0300000,
0xC0000000,
0x00000300,
0x00000080,
};
const unsigned long iocsr_scan_chain2_table[] = {
0x300C0300,
0x00000000,
0x0FF00000,
0x00000000,
0x0C0300C0,
0x00008000,
0x00060180,
0x00000000,
0x18000000,
0x00018060,
0x06018060,
0x00004000,
0x200300C0,
0x0C030000,
0x0C000000,
0x00000030,
0x0000C030,
0x00002000,
0x00018060,
0x00000000,
0x06000000,
0x00010018,
0x01806018,
0x00001000,
0x0000C030,
0x00000000,
0x03000000,
0x0000000C,
0x00C0300C,
0x00000800,
};
const unsigned long iocsr_scan_chain3_table[] = {
0x0C420D80,
0x0C3000FF,
0x0A804001,
0x07900000,
0x08020000,
0x00100000,
0x0A800000,
0x07900000,
0x08020000,
0x00100000,
0x20430000,
0x0C003001,
0x00C00481,
0x00000000,
0x00000021,
0x82000004,
0x05400000,
0x03C80000,
0x04010000,
0x00080000,
0x05400000,
0x03C80000,
0x05400000,
0x03C80000,
0x90218000,
0x86001800,
0x00600240,
0x80090218,
0x00000001,
0x40000002,
0x02A00000,
0x01E40000,
0x02A00000,
0x01E40000,
0x02A00000,
0x01E40000,
0x02A00000,
0x01E40000,
0x4810C000,
0x43000C00,
0x00300120,
0xC004810C,
0x12043000,
0x20000300,
0x00040000,
0x50670000,
0x00000010,
0x24590000,
0x00001000,
0xA0000034,
0x0D000001,
0xC0680A28,
0x45034030,
0x12481A01,
0x80A280D0,
0x34030C06,
0x01A01450,
0x280D0000,
0x30C0680A,
0x02490340,
0xD000001A,
0x0680A280,
0x10040000,
0x00200000,
0x10040000,
0x00200000,
0x15000000,
0x0F200000,
0x15000000,
0x0F200000,
0x01FE0000,
0x18000000,
0x01800902,
0x00240860,
0x007F8006,
0x00000000,
0x0A800001,
0x07900000,
0x0A800000,
0x07900000,
0x0A800000,
0x07900000,
0x08020000,
0x00100000,
0x20430000,
0x0C003001,
0x00C00481,
0x00000FF0,
0x4810C000,
0x80000C00,
0x05400000,
0x02480000,
0x04000000,
0x00080000,
0x05400000,
0x03C80000,
0x05400000,
0x03C80000,
0x90218000,
0x86001800,
0x00600240,
0x80090218,
0x24086001,
0x40000600,
0x02A00040,
0x01E40000,
0x02A00000,
0x01E40000,
0x02A00000,
0x01E40000,
0x02A00000,
0x01E40000,
0x4810C000,
0x43000C00,
0x00300120,
0xC004810C,
0x12043000,
0x20000300,
0x00040000,
0x50670000,
0x00000010,
0x24590000,
0x00001000,
0xA0000034,
0x0D000001,
0xC0680A28,
0x49034030,
0x12481A02,
0x80A280D0,
0x34030C06,
0x01A00040,
0x280D0002,
0x30C0680A,
0x02490340,
0xD00A281A,
0x0680A280,
0x10040000,
0x00200000,
0x10040000,
0x00200000,
0x15000000,
0x0F200000,
0x15000000,
0x0F200000,
0x01FE0000,
0x18000000,
0x01800902,
0x00240860,
0x007F8006,
0x00000000,
0x99300001,
0x34343400,
0xAA0D4000,
0x01C3A800,
0xAA0D4000,
0x01C3A890,
0xAA0D4000,
0x01C3A800,
0x00040100,
0x00000800,
0x00000000,
0x00001208,
0x00482000,
0x01000000,
0x00000000,
0x00410482,
0x0006A000,
0x0001B400,
0x00020000,
0x00000400,
0x0002A000,
0x0001E400,
0x5506A000,
0x00E1D400,
0x00000000,
0x2043090C,
0x00003001,
0x90400000,
0x00000000,
0x2020C243,
0x2A835000,
0x0070EA00,
0x2A835000,
0x0070EA24,
0x2A835000,
0x0070EA00,
0x00010040,
0x00000200,
0x00000000,
0x00000482,
0x00120800,
0x00002000,
0x80000000,
0x00104120,
0x00000200,
0xAC0D5F80,
0xFFFFFFFF,
0x14F3690D,
0x1A041414,
0x00D00000,
0x18864000,
0x49247A06,
0x9A28A3D7,
0xF511451E,
0x0356E388,
0x821A0000,
0x0000D000,
0x05140680,
0xD749247A,
0x1E9A28A3,
0x88F51145,
0x00034EE3,
0x00080000,
0x00001000,
0x00080200,
0x00001000,
0x000A8000,
0x00075000,
0x541A8000,
0x03875001,
0x00000000,
0x00000010,
0x0080C000,
0x41000000,
0x00003FC2,
0x00820000,
0xAA0D4000,
0x01C3A800,
0xAA0D4000,
0x01C3A890,
0xAA0D4000,
0x01C3A800,
0x00040000,
0x00000800,
0x00000000,
0x00001208,
0x00482000,
0x00800000,
0x00000000,
0x00410482,
0x0006A000,
0x0001B400,
0x00020000,
0x00000400,
0x00020080,
0x00000400,
0x5506A000,
0x00E1D400,
0x00000000,
0x0000090C,
0x00000010,
0x90400000,
0x00000000,
0x2020C243,
0x2A835000,
0x0070EA00,
0x2A835000,
0x0070EA24,
0x2A835000,
0x0070EA00,
0x00015000,
0x0000F200,
0x00000000,
0x00000482,
0x86120800,
0x00600240,
0x80000000,
0x00104120,
0x00000200,
0xAC0D5F80,
0xFFFFFFFF,
0x14F3690D,
0x1A041414,
0x00D00000,
0x18864000,
0x49247A06,
0xEBCF23D7,
0xF611451E,
0x034E9248,
0x821A038E,
0x0000D000,
0x00000680,
0xD749247A,
0x1E9BCF23,
0x88F61145,
0x00034EE3,
0x00080000,
0x00001000,
0x00080000,
0x00001000,
0x000A8000,
0x00075000,
0x541A8000,
0x03875001,
0x00000000,
0x00000010,
0x0080C000,
0x41000000,
0x00000002,
0x00820004,
0xAA0D4000,
0x01C3A800,
0xAA0D4000,
0x01C3A890,
0xAA0D4000,
0x01C3A800,
0x00040000,
0x00000800,
0x00000000,
0x00001208,
0x00482000,
0x00800000,
0x00000000,
0x00410482,
0x0006A000,
0x0001B400,
0x00020000,
0x00000400,
0x0002A000,
0x0001E400,
0x5506A000,
0x00E1D400,
0x00000000,
0x2043090C,
0x00003001,
0x90400000,
0x00000000,
0x2020C243,
0x2A835000,
0x0070EA00,
0x2A835000,
0x0070EA00,
0x2A835000,
0x0070EA00,
0x00010000,
0x00000200,
0x00000000,
0x00000482,
0x00120800,
0x00200000,
0x80000000,
0x00104120,
0x00000200,
0xAC0D5F80,
0xFFFFFFFF,
0x14F3690D,
0x1A041414,
0x00D00000,
0x18864000,
0x49247A06,
0x9A28A3D7,
0xF431451E,
0x034E9248,
0x821A0000,
0x0000D000,
0x00000680,
0xD749247A,
0x1E9A28A3,
0x88F61145,
0x000356E3,
0x00080000,
0x00001000,
0x00080000,
0x00001000,
0x000A8000,
0x00075000,
0x541A8000,
0x03875001,
0x00000000,
0x00000010,
0x0080C000,
0x41000000,
0x00000002,
0x00820004,
0xAA0D4000,
0x01C3A800,
0xAA0D4000,
0x01C3A800,
0xAA0D4000,
0x01C3A800,
0x00040000,
0x00000800,
0x00000000,
0x00001208,
0x00482000,
0x00800000,
0x00000000,
0x00410482,
0x0006A000,
0x0001B400,
0x00020000,
0x00000400,
0x00020000,
0x00000400,
0x5506A000,
0x00E1D400,
0x00000000,
0x0000090C,
0x00001000,
0x90400000,
0x00000000,
0x2020C243,
0x2A835000,
0x0070EA00,
0x2A835000,
0x0070EA00,
0x2A835000,
0x0070EA00,
0x00010040,
0x00000200,
0x00000000,
0x00000482,
0x00120800,
0x00400000,
0x80000000,
0x00104120,
0x00000200,
0xAC0D5F80,
0xFFFFFFFF,
0x14F1690D,
0x1A041414,
0x00D00000,
0x08864000,
0x49247A02,
0xEBCF23DB,
0xF431451E,
0x0356E388,
0x821A0000,
0x0000D000,
0x00000680,
0xD749247A,
0x1EEBCF23,
0x88F43E79,
0x000356A2,
0x00080000,
0x00001000,
0x00080000,
0x00001000,
0x000A8000,
0x00075000,
0x541A8000,
0x03875001,
0x00000000,
0x00000010,
0x0080C000,
0x41000000,
0x00000002,
0x00820004,
0x00489800,
0x801A1A1A,
0x00000200,
0x80000004,
0x00000200,
0x80000004,
0x00000200,
0x00000004,
0x00000200,
0x00000004,
0x00040000,
0x10000000,
0x00000000,
0x00004000,
0x00010000,
0x40002080,
0x00000100,
0x40000002,
0x00000100,
0x00000002,
0x00000100,
0x40000002,
0x00000100,
0x00000002,
0x00020000,
0x00000000,
0x00000008,
0x00000020,
0x00008000,
0x20001040,
0x00000080,
0x20000001,
0x00000080,
0x20000001,
0x00000080,
0x20000001,
0x00000080,
0x00000001,
0x00010000,
0x04000000,
0x00FF0000,
0x00000000,
0x00004000,
0x00000800,
0xC0000001,
0x00041419,
0x40000000,
0x04000816,
0x000D0000,
0x00006800,
0x00000340,
0xD000001A,
0x06800000,
0x00340000,
0x0001A000,
0x00000D00,
0x40000068,
0x1A000003,
0x00D00000,
0x00068000,
0x00003400,
0x000001A0,
0x00000401,
0x00000008,
0x00000401,
0x00000008,
0x00000401,
0x00000008,
0x00000401,
0x80000008,
0x0000007F,
0x20000000,
0x00000000,
0xE0000080,
0x0000001F,
0x00004000,
};
#endif /* __SOCFPGA_IOCSR_CONFIG_H__ */

View File

@ -1,218 +0,0 @@
/* SPDX-License-Identifier: BSD-3-Clause */
/*
* Altera SoCFPGA PinMux configuration
*/
#ifndef __SOCFPGA_PINMUX_CONFIG_H__
#define __SOCFPGA_PINMUX_CONFIG_H__
const u8 sys_mgr_init_table[] = {
3, /* EMACIO0 */
3, /* EMACIO1 */
3, /* EMACIO2 */
3, /* EMACIO3 */
3, /* EMACIO4 */
3, /* EMACIO5 */
3, /* EMACIO6 */
3, /* EMACIO7 */
3, /* EMACIO8 */
3, /* EMACIO9 */
3, /* EMACIO10 */
3, /* EMACIO11 */
3, /* EMACIO12 */
3, /* EMACIO13 */
0, /* EMACIO14 */
0, /* EMACIO15 */
0, /* EMACIO16 */
0, /* EMACIO17 */
0, /* EMACIO18 */
0, /* EMACIO19 */
3, /* FLASHIO0 */
0, /* FLASHIO1 */
3, /* FLASHIO2 */
3, /* FLASHIO3 */
3, /* FLASHIO4 */
3, /* FLASHIO5 */
3, /* FLASHIO6 */
3, /* FLASHIO7 */
0, /* FLASHIO8 */
3, /* FLASHIO9 */
3, /* FLASHIO10 */
3, /* FLASHIO11 */
0, /* GENERALIO0 */
1, /* GENERALIO1 */
1, /* GENERALIO2 */
0, /* GENERALIO3 */
0, /* GENERALIO4 */
1, /* GENERALIO5 */
1, /* GENERALIO6 */
1, /* GENERALIO7 */
1, /* GENERALIO8 */
0, /* GENERALIO9 */
0, /* GENERALIO10 */
0, /* GENERALIO11 */
0, /* GENERALIO12 */
2, /* GENERALIO13 */
2, /* GENERALIO14 */
1, /* GENERALIO15 */
1, /* GENERALIO16 */
1, /* GENERALIO17 */
1, /* GENERALIO18 */
0, /* GENERALIO19 */
0, /* GENERALIO20 */
0, /* GENERALIO21 */
0, /* GENERALIO22 */
0, /* GENERALIO23 */
0, /* GENERALIO24 */
0, /* GENERALIO25 */
0, /* GENERALIO26 */
0, /* GENERALIO27 */
0, /* GENERALIO28 */
0, /* GENERALIO29 */
0, /* GENERALIO30 */
0, /* GENERALIO31 */
0, /* MIXED1IO0 */
1, /* MIXED1IO1 */
1, /* MIXED1IO2 */
1, /* MIXED1IO3 */
1, /* MIXED1IO4 */
0, /* MIXED1IO5 */
0, /* MIXED1IO6 */
0, /* MIXED1IO7 */
1, /* MIXED1IO8 */
1, /* MIXED1IO9 */
1, /* MIXED1IO10 */
1, /* MIXED1IO11 */
0, /* MIXED1IO12 */
0, /* MIXED1IO13 */
0, /* MIXED1IO14 */
1, /* MIXED1IO15 */
1, /* MIXED1IO16 */
1, /* MIXED1IO17 */
1, /* MIXED1IO18 */
0, /* MIXED1IO19 */
0, /* MIXED1IO20 */
0, /* MIXED1IO21 */
0, /* MIXED2IO0 */
0, /* MIXED2IO1 */
0, /* MIXED2IO2 */
0, /* MIXED2IO3 */
0, /* MIXED2IO4 */
0, /* MIXED2IO5 */
0, /* MIXED2IO6 */
0, /* MIXED2IO7 */
0, /* GPLINMUX48 */
0, /* GPLINMUX49 */
0, /* GPLINMUX50 */
0, /* GPLINMUX51 */
0, /* GPLINMUX52 */
0, /* GPLINMUX53 */
0, /* GPLINMUX54 */
0, /* GPLINMUX55 */
0, /* GPLINMUX56 */
0, /* GPLINMUX57 */
0, /* GPLINMUX58 */
0, /* GPLINMUX59 */
0, /* GPLINMUX60 */
0, /* GPLINMUX61 */
0, /* GPLINMUX62 */
0, /* GPLINMUX63 */
0, /* GPLINMUX64 */
0, /* GPLINMUX65 */
0, /* GPLINMUX66 */
0, /* GPLINMUX67 */
0, /* GPLINMUX68 */
0, /* GPLINMUX69 */
0, /* GPLINMUX70 */
1, /* GPLMUX0 */
1, /* GPLMUX1 */
1, /* GPLMUX2 */
1, /* GPLMUX3 */
1, /* GPLMUX4 */
1, /* GPLMUX5 */
1, /* GPLMUX6 */
1, /* GPLMUX7 */
1, /* GPLMUX8 */
1, /* GPLMUX9 */
1, /* GPLMUX10 */
1, /* GPLMUX11 */
1, /* GPLMUX12 */
1, /* GPLMUX13 */
1, /* GPLMUX14 */
1, /* GPLMUX15 */
1, /* GPLMUX16 */
1, /* GPLMUX17 */
1, /* GPLMUX18 */
1, /* GPLMUX19 */
1, /* GPLMUX20 */
1, /* GPLMUX21 */
1, /* GPLMUX22 */
1, /* GPLMUX23 */
1, /* GPLMUX24 */
1, /* GPLMUX25 */
1, /* GPLMUX26 */
1, /* GPLMUX27 */
1, /* GPLMUX28 */
1, /* GPLMUX29 */
1, /* GPLMUX30 */
1, /* GPLMUX31 */
1, /* GPLMUX32 */
1, /* GPLMUX33 */
1, /* GPLMUX34 */
1, /* GPLMUX35 */
1, /* GPLMUX36 */
1, /* GPLMUX37 */
1, /* GPLMUX38 */
1, /* GPLMUX39 */
1, /* GPLMUX40 */
1, /* GPLMUX41 */
1, /* GPLMUX42 */
1, /* GPLMUX43 */
1, /* GPLMUX44 */
1, /* GPLMUX45 */
1, /* GPLMUX46 */
1, /* GPLMUX47 */
1, /* GPLMUX48 */
1, /* GPLMUX49 */
1, /* GPLMUX50 */
1, /* GPLMUX51 */
1, /* GPLMUX52 */
1, /* GPLMUX53 */
1, /* GPLMUX54 */
1, /* GPLMUX55 */
1, /* GPLMUX56 */
1, /* GPLMUX57 */
1, /* GPLMUX58 */
1, /* GPLMUX59 */
1, /* GPLMUX60 */
1, /* GPLMUX61 */
1, /* GPLMUX62 */
1, /* GPLMUX63 */
1, /* GPLMUX64 */
1, /* GPLMUX65 */
1, /* GPLMUX66 */
1, /* GPLMUX67 */
1, /* GPLMUX68 */
1, /* GPLMUX69 */
1, /* GPLMUX70 */
0, /* NANDUSEFPGA */
0, /* UART0USEFPGA */
0, /* RGMII1USEFPGA */
0, /* SPIS0USEFPGA */
0, /* CAN0USEFPGA */
0, /* I2C0USEFPGA */
0, /* SDMMCUSEFPGA */
0, /* QSPIUSEFPGA */
0, /* SPIS1USEFPGA */
0, /* RGMII0USEFPGA */
1, /* UART1USEFPGA */
0, /* CAN1USEFPGA */
0, /* USB1USEFPGA */
0, /* I2C3USEFPGA */
0, /* I2C2USEFPGA */
0, /* I2C1USEFPGA */
0, /* SPIM1USEFPGA */
0, /* USB0USEFPGA */
0 /* SPIM0USEFPGA */
};
#endif /* __SOCFPGA_PINMUX_CONFIG_H__ */

View File

@ -1,84 +0,0 @@
/* SPDX-License-Identifier: BSD-3-Clause */
/*
* Altera SoCFPGA Clock and PLL configuration
*/
#ifndef __SOCFPGA_PLL_CONFIG_H__
#define __SOCFPGA_PLL_CONFIG_H__
#define CONFIG_HPS_DBCTRL_STAYOSC1 1
#define CONFIG_HPS_MAINPLLGRP_VCO_DENOM 0
#define CONFIG_HPS_MAINPLLGRP_VCO_NUMER 63
#define CONFIG_HPS_MAINPLLGRP_MPUCLK_CNT 0
#define CONFIG_HPS_MAINPLLGRP_MAINCLK_CNT 0
#define CONFIG_HPS_MAINPLLGRP_DBGATCLK_CNT 0
#define CONFIG_HPS_MAINPLLGRP_MAINQSPICLK_CNT 511
#define CONFIG_HPS_MAINPLLGRP_MAINNANDSDMMCCLK_CNT 511
#define CONFIG_HPS_MAINPLLGRP_CFGS2FUSER0CLK_CNT 15
#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3MPCLK 1
#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3SPCLK 1
#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4MPCLK 1
#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4SPCLK 1
#define CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGATCLK 0
#define CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGCLK 1
#define CONFIG_HPS_MAINPLLGRP_TRACEDIV_TRACECLK 0
#define CONFIG_HPS_MAINPLLGRP_L4SRC_L4MP 1
#define CONFIG_HPS_MAINPLLGRP_L4SRC_L4SP 1
#define CONFIG_HPS_PERPLLGRP_VCO_DENOM 0
#define CONFIG_HPS_PERPLLGRP_VCO_NUMER 39
#define CONFIG_HPS_PERPLLGRP_VCO_PSRC 0
#define CONFIG_HPS_PERPLLGRP_EMAC0CLK_CNT 3
#define CONFIG_HPS_PERPLLGRP_EMAC1CLK_CNT 511
#define CONFIG_HPS_PERPLLGRP_PERQSPICLK_CNT 511
#define CONFIG_HPS_PERPLLGRP_PERNANDSDMMCCLK_CNT 4
#define CONFIG_HPS_PERPLLGRP_PERBASECLK_CNT 4
#define CONFIG_HPS_PERPLLGRP_S2FUSER1CLK_CNT 511
#define CONFIG_HPS_PERPLLGRP_DIV_USBCLK 0
#define CONFIG_HPS_PERPLLGRP_DIV_SPIMCLK 0
#define CONFIG_HPS_PERPLLGRP_DIV_CAN0CLK 1
#define CONFIG_HPS_PERPLLGRP_DIV_CAN1CLK 1
#define CONFIG_HPS_PERPLLGRP_GPIODIV_GPIODBCLK 6249
#define CONFIG_HPS_PERPLLGRP_SRC_SDMMC 2
#define CONFIG_HPS_PERPLLGRP_SRC_NAND 2
#define CONFIG_HPS_PERPLLGRP_SRC_QSPI 1
#define CONFIG_HPS_SDRPLLGRP_VCO_DENOM 0
#define CONFIG_HPS_SDRPLLGRP_VCO_NUMER 31
#define CONFIG_HPS_SDRPLLGRP_VCO_SSRC 0
#define CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_CNT 1
#define CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_PHASE 0
#define CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_CNT 0
#define CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_PHASE 0
#define CONFIG_HPS_SDRPLLGRP_DDRDQCLK_CNT 1
#define CONFIG_HPS_SDRPLLGRP_DDRDQCLK_PHASE 4
#define CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_CNT 5
#define CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_PHASE 0
#define CONFIG_HPS_CLK_OSC1_HZ 25000000
#define CONFIG_HPS_CLK_OSC2_HZ 25000000
#define CONFIG_HPS_CLK_F2S_SDR_REF_HZ 0
#define CONFIG_HPS_CLK_F2S_PER_REF_HZ 0
#define CONFIG_HPS_CLK_MAINVCO_HZ 1600000000
#define CONFIG_HPS_CLK_PERVCO_HZ 1000000000
#define CONFIG_HPS_CLK_SDRVCO_HZ 800000000
#define CONFIG_HPS_CLK_EMAC0_HZ 250000000
#define CONFIG_HPS_CLK_EMAC1_HZ 1953125
#define CONFIG_HPS_CLK_USBCLK_HZ 200000000
#define CONFIG_HPS_CLK_NAND_HZ 50000000
#define CONFIG_HPS_CLK_SDMMC_HZ 200000000
#define CONFIG_HPS_CLK_QSPI_HZ 3125000
#define CONFIG_HPS_CLK_SPIM_HZ 200000000
#define CONFIG_HPS_CLK_CAN0_HZ 100000000
#define CONFIG_HPS_CLK_CAN1_HZ 100000000
#define CONFIG_HPS_CLK_GPIODB_HZ 32000
#define CONFIG_HPS_CLK_L4_MP_HZ 100000000
#define CONFIG_HPS_CLK_L4_SP_HZ 100000000
#define CONFIG_HPS_ALTERAGRP_MPUCLK 1
#define CONFIG_HPS_ALTERAGRP_MAINCLK 3
#define CONFIG_HPS_ALTERAGRP_DBGATCLK 3
#endif /* __SOCFPGA_PLL_CONFIG_H__ */

View File

@ -1,343 +0,0 @@
/* SPDX-License-Identifier: BSD-3-Clause */
/*
* Altera SoCFPGA SDRAM configuration
*/
#ifndef __SOCFPGA_SDRAM_CONFIG_H__
#define __SOCFPGA_SDRAM_CONFIG_H__
/* SDRAM configuration */
#define CONFIG_HPS_SDR_CTRLCFG_CPORTRDWR_CPORTRDWR 0x5A56A
#define CONFIG_HPS_SDR_CTRLCFG_CPORTRMAP_CPORTRMAP 0xB00088
#define CONFIG_HPS_SDR_CTRLCFG_CPORTWIDTH_CPORTWIDTH 0x44555
#define CONFIG_HPS_SDR_CTRLCFG_CPORTWMAP_CPORTWMAP 0x2C011000
#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ADDRORDER 0
#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_DQSTRKEN 0
#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCCORREN 0
#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCEN 0
#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMBL 8
#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMTYPE 2
#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_NODMPINS 0
#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_REORDEREN 1
#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_STARVELIMIT 10
#define CONFIG_HPS_SDR_CTRLCFG_CTRLWIDTH_CTRLWIDTH 2
#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_BANKBITS 3
#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_COLBITS 10
#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_CSBITS 1
#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_ROWBITS 15
#define CONFIG_HPS_SDR_CTRLCFG_DRAMDEVWIDTH_DEVWIDTH 8
#define CONFIG_HPS_SDR_CTRLCFG_DRAMIFWIDTH_IFWIDTH 32
#define CONFIG_HPS_SDR_CTRLCFG_DRAMINTR_INTREN 0
#define CONFIG_HPS_SDR_CTRLCFG_DRAMODT_READ 0
#define CONFIG_HPS_SDR_CTRLCFG_DRAMODT_WRITE 1
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_AL 0
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCL 6
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCWL 6
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TFAW 16
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRFC 140
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRRD 5
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRCD 6
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TREFI 1560
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRP 6
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWR 6
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWTR 4
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TCCD 4
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TMRD 4
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRAS 14
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRC 20
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRTP 5
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_PWRDOWNEXIT 3
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_SELFRFSHEXIT 512
#define CONFIG_HPS_SDR_CTRLCFG_EXTRATIME1_CFG_EXTRA_CTL_CLK_RD_TO_WR 0
#define CONFIG_HPS_SDR_CTRLCFG_EXTRATIME1_CFG_EXTRA_CTL_CLK_RD_TO_WR_BC 0
#define CONFIG_HPS_SDR_CTRLCFG_EXTRATIME1_CFG_EXTRA_CTL_CLK_RD_TO_WR_DIFF_CHIP 0
#define CONFIG_HPS_SDR_CTRLCFG_FIFOCFG_INCSYNC 0
#define CONFIG_HPS_SDR_CTRLCFG_FIFOCFG_SYNCMODE 0
#define CONFIG_HPS_SDR_CTRLCFG_FPGAPORTRST 0x0
#define CONFIG_HPS_SDR_CTRLCFG_LOWPWREQ_SELFRFSHMASK 3
#define CONFIG_HPS_SDR_CTRLCFG_LOWPWRTIMING_AUTOPDCYCLES 0
#define CONFIG_HPS_SDR_CTRLCFG_LOWPWRTIMING_CLKDISABLECYCLES 8
#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_0_THRESHOLD1_31_0 0x20820820
#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_1_THRESHOLD1_59_32 0x8208208
#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_1_THRESHOLD2_3_0 0
#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_2_THRESHOLD2_35_4 0x41041041
#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_3_THRESHOLD2_59_36 0x410410
#define CONFIG_HPS_SDR_CTRLCFG_MPPRIORITY_USERPRIORITY 0x3FFD1088
#define CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_0_THRESHOLDRSTCYCLES_31_0 0x01010101
#define CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_1_THRESHOLDRSTCYCLES_63_32 0x01010101
#define CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_2_THRESHOLDRSTCYCLES_79_64 0x0101
#define CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_0_STATICWEIGHT_31_0 0x21084210
#define CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_1_STATICWEIGHT_49_32 0x1EF84
#define CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_1_SUMOFWEIGHT_13_0 0x2020
#define CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_2_SUMOFWEIGHT_45_14 0x0
#define CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_3_SUMOFWEIGHT_63_46 0xF800
#define CONFIG_HPS_SDR_CTRLCFG_PHYCTRL_PHYCTRL_0 0x200
#define CONFIG_HPS_SDR_CTRLCFG_PORTCFG_AUTOPCHEN 0
#define CONFIG_HPS_SDR_CTRLCFG_RFIFOCMAP_RFIFOCMAP 0x760210
#define CONFIG_HPS_SDR_CTRLCFG_STATICCFG_MEMBL 2
#define CONFIG_HPS_SDR_CTRLCFG_STATICCFG_USEECCASDATA 0
#define CONFIG_HPS_SDR_CTRLCFG_WFIFOCMAP_WFIFOCMAP 0x980543
/* Sequencer auto configuration */
#define RW_MGR_ACTIVATE_0_AND_1 0x0D
#define RW_MGR_ACTIVATE_0_AND_1_WAIT1 0x0E
#define RW_MGR_ACTIVATE_0_AND_1_WAIT2 0x10
#define RW_MGR_ACTIVATE_1 0x0F
#define RW_MGR_CLEAR_DQS_ENABLE 0x49
#define RW_MGR_GUARANTEED_READ 0x4C
#define RW_MGR_GUARANTEED_READ_CONT 0x54
#define RW_MGR_GUARANTEED_WRITE 0x18
#define RW_MGR_GUARANTEED_WRITE_WAIT0 0x1B
#define RW_MGR_GUARANTEED_WRITE_WAIT1 0x1F
#define RW_MGR_GUARANTEED_WRITE_WAIT2 0x19
#define RW_MGR_GUARANTEED_WRITE_WAIT3 0x1D
#define RW_MGR_IDLE 0x00
#define RW_MGR_IDLE_LOOP1 0x7B
#define RW_MGR_IDLE_LOOP2 0x7A
#define RW_MGR_INIT_RESET_0_CKE_0 0x6F
#define RW_MGR_INIT_RESET_1_CKE_0 0x74
#define RW_MGR_LFSR_WR_RD_BANK_0 0x22
#define RW_MGR_LFSR_WR_RD_BANK_0_DATA 0x25
#define RW_MGR_LFSR_WR_RD_BANK_0_DQS 0x24
#define RW_MGR_LFSR_WR_RD_BANK_0_NOP 0x23
#define RW_MGR_LFSR_WR_RD_BANK_0_WAIT 0x32
#define RW_MGR_LFSR_WR_RD_BANK_0_WL_1 0x21
#define RW_MGR_LFSR_WR_RD_DM_BANK_0 0x36
#define RW_MGR_LFSR_WR_RD_DM_BANK_0_DATA 0x39
#define RW_MGR_LFSR_WR_RD_DM_BANK_0_DQS 0x38
#define RW_MGR_LFSR_WR_RD_DM_BANK_0_NOP 0x37
#define RW_MGR_LFSR_WR_RD_DM_BANK_0_WAIT 0x46
#define RW_MGR_LFSR_WR_RD_DM_BANK_0_WL_1 0x35
#define RW_MGR_MRS0_DLL_RESET 0x02
#define RW_MGR_MRS0_DLL_RESET_MIRR 0x08
#define RW_MGR_MRS0_USER 0x07
#define RW_MGR_MRS0_USER_MIRR 0x0C
#define RW_MGR_MRS1 0x03
#define RW_MGR_MRS1_MIRR 0x09
#define RW_MGR_MRS2 0x04
#define RW_MGR_MRS2_MIRR 0x0A
#define RW_MGR_MRS3 0x05
#define RW_MGR_MRS3_MIRR 0x0B
#define RW_MGR_PRECHARGE_ALL 0x12
#define RW_MGR_READ_B2B 0x59
#define RW_MGR_READ_B2B_WAIT1 0x61
#define RW_MGR_READ_B2B_WAIT2 0x6B
#define RW_MGR_REFRESH_ALL 0x14
#define RW_MGR_RETURN 0x01
#define RW_MGR_SGLE_READ 0x7D
#define RW_MGR_ZQCL 0x06
/* Sequencer defines configuration */
#define AFI_RATE_RATIO 1
#define CALIB_LFIFO_OFFSET 7
#define CALIB_VFIFO_OFFSET 5
#define ENABLE_SUPER_QUICK_CALIBRATION 0
#define IO_DELAY_PER_DCHAIN_TAP 25
#define IO_DELAY_PER_DQS_EN_DCHAIN_TAP 25
#define IO_DELAY_PER_OPA_TAP 312
#define IO_DLL_CHAIN_LENGTH 8
#define IO_DQDQS_OUT_PHASE_MAX 0
#define IO_DQS_EN_DELAY_MAX 31
#define IO_DQS_EN_DELAY_OFFSET 0
#define IO_DQS_EN_PHASE_MAX 7
#define IO_DQS_IN_DELAY_MAX 31
#define IO_DQS_IN_RESERVE 4
#define IO_DQS_OUT_RESERVE 4
#define IO_IO_IN_DELAY_MAX 31
#define IO_IO_OUT1_DELAY_MAX 31
#define IO_IO_OUT2_DELAY_MAX 0
#define IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS 0
#define MAX_LATENCY_COUNT_WIDTH 5
#define READ_VALID_FIFO_SIZE 16
#define REG_FILE_INIT_SEQ_SIGNATURE 0x55550496
#define RW_MGR_MEM_ADDRESS_MIRRORING 0
#define RW_MGR_MEM_DATA_MASK_WIDTH 4
#define RW_MGR_MEM_DATA_WIDTH 32
#define RW_MGR_MEM_DQ_PER_READ_DQS 8
#define RW_MGR_MEM_DQ_PER_WRITE_DQS 8
#define RW_MGR_MEM_IF_READ_DQS_WIDTH 4
#define RW_MGR_MEM_IF_WRITE_DQS_WIDTH 4
#define RW_MGR_MEM_NUMBER_OF_CS_PER_DIMM 1
#define RW_MGR_MEM_NUMBER_OF_RANKS 1
#define RW_MGR_MEM_VIRTUAL_GROUPS_PER_READ_DQS 1
#define RW_MGR_MEM_VIRTUAL_GROUPS_PER_WRITE_DQS 1
#define RW_MGR_TRUE_MEM_DATA_MASK_WIDTH 4
#define TINIT_CNTR0_VAL 99
#define TINIT_CNTR1_VAL 32
#define TINIT_CNTR2_VAL 32
#define TRESET_CNTR0_VAL 99
#define TRESET_CNTR1_VAL 99
#define TRESET_CNTR2_VAL 10
/* Sequencer ac_rom_init configuration */
const u32 ac_rom_init[] = {
0x20700000,
0x20780000,
0x10080421,
0x10080520,
0x10090044,
0x100a0008,
0x100b0000,
0x10380400,
0x10080441,
0x100804c0,
0x100a0024,
0x10090010,
0x100b0000,
0x30780000,
0x38780000,
0x30780000,
0x10680000,
0x106b0000,
0x10280400,
0x10480000,
0x1c980000,
0x1c9b0000,
0x1c980008,
0x1c9b0008,
0x38f80000,
0x3cf80000,
0x38780000,
0x18180000,
0x18980000,
0x13580000,
0x135b0000,
0x13580008,
0x135b0008,
0x33780000,
0x10580008,
0x10780000
};
/* Sequencer inst_rom_init configuration */
const u32 inst_rom_init[] = {
0x80000,
0x80680,
0x8180,
0x8200,
0x8280,
0x8300,
0x8380,
0x8100,
0x8480,
0x8500,
0x8580,
0x8600,
0x8400,
0x800,
0x8680,
0x880,
0xa680,
0x80680,
0x900,
0x80680,
0x980,
0xa680,
0x8680,
0x80680,
0xb68,
0xcce8,
0xae8,
0x8ce8,
0xb88,
0xec88,
0xa08,
0xac88,
0x80680,
0xce00,
0xcd80,
0xe700,
0xc00,
0x20ce0,
0x20ce0,
0x20ce0,
0x20ce0,
0xd00,
0x680,
0x680,
0x680,
0x680,
0x60e80,
0x61080,
0x61080,
0x61080,
0xa680,
0x8680,
0x80680,
0xce00,
0xcd80,
0xe700,
0xc00,
0x30ce0,
0x30ce0,
0x30ce0,
0x30ce0,
0xd00,
0x680,
0x680,
0x680,
0x680,
0x70e80,
0x71080,
0x71080,
0x71080,
0xa680,
0x8680,
0x80680,
0x1158,
0x6d8,
0x80680,
0x1168,
0x7e8,
0x7e8,
0x87e8,
0x40fe8,
0x410e8,
0x410e8,
0x410e8,
0x1168,
0x7e8,
0x7e8,
0xa7e8,
0x80680,
0x40e88,
0x41088,
0x41088,
0x41088,
0x40f68,
0x410e8,
0x410e8,
0x410e8,
0xa680,
0x40fe8,
0x410e8,
0x410e8,
0x410e8,
0x41008,
0x41088,
0x41088,
0x41088,
0x1100,
0xc680,
0x8680,
0xe680,
0x80680,
0x0,
0x8000,
0xa000,
0xc000,
0x80000,
0x80,
0x8080,
0xa080,
0xc080,
0x80080,
0x9180,
0x8680,
0xa680,
0x80680,
0x40f08,
0x80680
};
#endif /* __SOCFPGA_SDRAM_CONFIG_H__ */

View File

@ -1,5 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2015 Marek Vasut <marex@denx.de>
*/
#include <common.h>

View File

@ -1,58 +0,0 @@
CONFIG_ARM=y
CONFIG_ARCH_MX28=y
CONFIG_SYS_TEXT_BASE=0x40002000
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_TARGET_M28EVK=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyAMA0,115200n8 "
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_HUSH_PARSER=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND_TRIMFFS=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_BMP=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_DATE=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:3m(u-boot),512k(env1),512k(env2),14m(boot),238m(data),-@4096k(UBI)"
CONFIG_CMD_UBI=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_MMC_MXS=y
CONFIG_NAND=y
CONFIG_NAND_MXS=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_CONS_INDEX=0
CONFIG_SPI=y
CONFIG_MXS_SPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_VIDEO=y
CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y

View File

@ -1,58 +0,0 @@
CONFIG_ARM=y
CONFIG_ARCH_MX5=y
CONFIG_SYS_TEXT_BASE=0x71000000
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_TARGET_M53EVK=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
# CONFIG_CMD_BMODE is not set
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aries/m53evk/imximage.cfg"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttymxc1,115200"
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND_TRIMFFS=y
CONFIG_CMD_SATA=y
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_BMP=y
CONFIG_CMD_DATE=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_MTDIDS_DEFAULT="nand0=mxc_nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=mxc_nand:1024k(u-boot),512k(env1),512k(env2),14m(boot),240m(data),-@2048k(UBI)"
CONFIG_CMD_UBI=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_DWC_AHSATA=y
CONFIG_FSL_ESDHC=y
CONFIG_NAND=y
CONFIG_NAND_MXC=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_ETHER_MCS7830=y
CONFIG_USB_ETHER_SMSC95XX=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y

View File

@ -1,61 +0,0 @@
CONFIG_ARM=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x26f00000
CONFIG_TARGET_MA5D4EVK=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4_ma5d4evk"
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS3,115200"
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMI is not set
CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_DFU=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM=y
CONFIG_DFU_MMC=y
CONFIG_DFU_SF=y
CONFIG_SPI_FLASH=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="AriesEmbedded"
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_USB_GADGET_ATMEL_USBA=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_USB_ETHER=y
CONFIG_FAT_WRITE=y
# CONFIG_EFI_LOADER is not set

View File

@ -1,68 +0,0 @@
CONFIG_ARM=y
CONFIG_ARCH_SOCFPGA=y
CONFIG_SYS_TEXT_BASE=0x01000040
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_TARGET_SOCFPGA_ARIES_MCVEVK=y
CONFIG_SPL=y
CONFIG_SPL_STACK_R_ADDR=0x00800000
CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_mcvevk"
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_DFU=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_MTDIDS_DEFAULT="nor0=ff705000.spi.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=ff705000.spi.0:1m(u-boot),256k(env1),256k(env2),14848k(boot),16m(rootfs),-@1536k(UBI)0"
CONFIG_CMD_UBI=y
# CONFIG_ISO_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SPL_DM=y
CONFIG_DFU_MMC=y
CONFIG_FPGA_SOCFPGA=y
CONFIG_DM_GPIO=y
CONFIG_DWAPB_GPIO=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_DW=y
CONFIG_DM_MMC=y
CONFIG_MMC_DW=y
CONFIG_DM_ETH=y
CONFIG_PHY_GIGE=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_DM_RESET=y
CONFIG_SPI=y
CONFIG_CADENCE_QSPI=y
CONFIG_DESIGNWARE_SPI=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_DWC2=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="denx"
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_USE_TINY_PRINTF=y

View File

@ -1,225 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
* on behalf of DENX Software Engineering GmbH
*/
#ifndef __CONFIGS_M28EVK_H__
#define __CONFIGS_M28EVK_H__
/* System configurations */
#define CONFIG_MACH_TYPE MACH_TYPE_M28EVK
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
/* Memory configuration */
#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
#define PHYS_SDRAM_1 0x40000000 /* Base address */
#define PHYS_SDRAM_1_SIZE 0x20000000 /* Max 512 MB RAM */
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
/* Environment */
#define CONFIG_ENV_SIZE (16 * 1024)
/* Environment is in NAND */
#if defined(CONFIG_CMD_NAND) && defined(CONFIG_ENV_IS_IN_NAND)
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
#define CONFIG_ENV_SECT_SIZE (128 * 1024)
#define CONFIG_ENV_RANGE (4 * CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_OFFSET (24 * CONFIG_ENV_SECT_SIZE) /* 3 MiB */
#define CONFIG_ENV_OFFSET_REDUND \
(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
#endif
/* FEC Ethernet on SoC */
#ifdef CONFIG_CMD_NET
#define CONFIG_FEC_MXC
#endif
/* RTC */
#ifdef CONFIG_CMD_DATE
/* Use the internal RTC in the MXS chip */
#define CONFIG_RTC_INTERNAL
#ifdef CONFIG_RTC_INTERNAL
#define CONFIG_RTC_MXS
#else
#define CONFIG_RTC_M41T62
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
#define CONFIG_SYS_M41T11_BASE_YEAR 2000
#endif
#endif
/* USB */
#ifdef CONFIG_CMD_USB
#define CONFIG_EHCI_MXS_PORT0
#define CONFIG_EHCI_MXS_PORT1
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#endif
/* SPI */
#ifdef CONFIG_CMD_SPI
#define CONFIG_DEFAULT_SPI_BUS 2
#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0
/* SPI FLASH */
#ifdef CONFIG_CMD_SF
#define CONFIG_SF_DEFAULT_BUS 2
#define CONFIG_SF_DEFAULT_CS 0
#define CONFIG_SF_DEFAULT_SPEED 40000000
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
#define CONFIG_ENV_SPI_BUS 2
#define CONFIG_ENV_SPI_CS 0
#define CONFIG_ENV_SPI_MAX_HZ 40000000
#define CONFIG_ENV_SPI_MODE SPI_MODE_0
#endif
#endif
/* LCD */
#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_LOGO
#define CONFIG_SPLASH_SCREEN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_GZIP
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20)
#endif
/* Booting Linux */
#define CONFIG_BOOTFILE "fitImage"
#define CONFIG_BOOTCOMMAND "run mmc_mmc"
#define CONFIG_LOADADDR 0x42000000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
/* Extra Environment */
#define CONFIG_PREBOOT "run try_bootscript"
#define CONFIG_HOSTNAME "m28evk"
#define CONFIG_EXTRA_ENV_SETTINGS \
"consdev=ttyAMA0\0" \
"baudrate=115200\0" \
"bootscript=boot.scr\0" \
"bootdev=/dev/mmcblk0p2\0" \
"rootdev=/dev/mmcblk0p3\0" \
"netdev=eth0\0" \
"hostname=m28evk\0" \
"rootpath=/opt/eldk-5.5/armv5te/rootfs-qte-sdk\0" \
"kernel_addr_r=0x42000000\0" \
"videomode=video=ctfb:x:800,y:480,depth:18,mode:0,pclk:30066," \
"le:0,ri:256,up:0,lo:45,hs:1,vs:1,sync:100663296," \
"vmode:0\0" \
"update_nand_full_filename=u-boot.nand\0" \
"update_nand_firmware_filename=u-boot.sb\0" \
"update_sd_firmware_filename=u-boot.sd\0" \
"update_nand_firmware_maxsz=0x100000\0" \
"update_nand_stride=0x40\0" /* MX28 datasheet ch. 12.12 */ \
"update_nand_count=0x4\0" /* MX28 datasheet ch. 12.12 */ \
"update_nand_get_fcb_size=" /* Get size of FCB blocks */ \
"nand device 0 ; " \
"nand info ; " \
"setexpr fcb_sz ${update_nand_stride} * ${update_nand_count};" \
"setexpr update_nand_fcb ${fcb_sz} * ${nand_writesize}\0" \
"update_nand_full=" /* Update FCB, DBBT and FW */ \
"if tftp ${update_nand_full_filename} ; then " \
"run update_nand_get_fcb_size ; " \
"nand scrub -y 0x0 ${filesize} ; " \
"nand write.raw ${loadaddr} 0x0 ${fcb_sz} ; " \
"setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \
"setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \
"nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \
"fi\0" \
"update_nand_firmware=" /* Update only firmware */ \
"if tftp ${update_nand_firmware_filename} ; then " \
"run update_nand_get_fcb_size ; " \
"setexpr fcb_sz ${update_nand_fcb} * 2 ; " /* FCB + DBBT */ \
"setexpr fw_sz ${update_nand_firmware_maxsz} * 2 ; " \
"setexpr fw_off ${fcb_sz} + ${update_nand_firmware_maxsz};" \
"nand erase ${fcb_sz} ${fw_sz} ; " \
"nand write ${loadaddr} ${fcb_sz} ${filesize} ; " \
"nand write ${loadaddr} ${fw_off} ${filesize} ; " \
"fi\0" \
"update_sd_firmware=" /* Update the SD firmware partition */ \
"if mmc rescan ; then " \
"if tftp ${update_sd_firmware_filename} ; then " \
"setexpr fw_sz ${filesize} / 0x200 ; " /* SD block size */ \
"setexpr fw_sz ${fw_sz} + 1 ; " \
"mmc write ${loadaddr} 0x800 ${fw_sz} ; " \
"fi ; " \
"fi\0" \
"addcons=" \
"setenv bootargs ${bootargs} " \
"console=${consdev},${baudrate}\0" \
"addip=" \
"setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:" \
"${netmask}:${hostname}:${netdev}:off\0" \
"addmisc=" \
"setenv bootargs ${bootargs} ${miscargs}\0" \
"adddfltmtd=" \
"if test \"x${mtdparts}\" == \"x\" ; then " \
"mtdparts default ; " \
"fi\0" \
"addmtd=" \
"run adddfltmtd ; " \
"setenv bootargs ${bootargs} ${mtdparts}\0" \
"addargs=run addcons addmtd addmisc\0" \
"mmcload=" \
"mmc rescan ; " \
"load mmc 0:2 ${kernel_addr_r} ${bootfile}\0" \
"ubiload=" \
"ubi part UBI ; ubifsmount ubi0:rootfs ; " \
"ubifsload ${kernel_addr_r} /boot/${bootfile}\0" \
"netload=" \
"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
"miscargs=nohlt panic=1\0" \
"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
"ubiargs=" \
"setenv bootargs ubi.mtd=5 " \
"root=ubi0:rootfs rootfstype=ubifs\0" \
"nfsargs=" \
"setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath},v3,tcp\0" \
"mmc_mmc=" \
"run mmcload mmcargs addargs ; " \
"bootm ${kernel_addr_r}\0" \
"mmc_ubi=" \
"run mmcload ubiargs addargs ; " \
"bootm ${kernel_addr_r}\0" \
"mmc_nfs=" \
"run mmcload nfsargs addip addargs ; " \
"bootm ${kernel_addr_r}\0" \
"ubi_mmc=" \
"run ubiload mmcargs addargs ; " \
"bootm ${kernel_addr_r}\0" \
"ubi_ubi=" \
"run ubiload ubiargs addargs ; " \
"bootm ${kernel_addr_r}\0" \
"ubi_nfs=" \
"run ubiload nfsargs addip addargs ; " \
"bootm ${kernel_addr_r}\0" \
"net_mmc=" \
"run netload mmcargs addargs ; " \
"bootm ${kernel_addr_r}\0" \
"net_ubi=" \
"run netload ubiargs addargs ; " \
"bootm ${kernel_addr_r}\0" \
"net_nfs=" \
"run netload nfsargs addip addargs ; " \
"bootm ${kernel_addr_r}\0" \
"try_bootscript=" \
"mmc rescan;" \
"if test -e mmc 0:2 ${bootscript} ; then " \
"if load mmc 0:2 ${kernel_addr_r} ${bootscript};" \
"then ; " \
"echo Running bootscript... ; " \
"source ${kernel_addr_r} ; " \
"fi ; " \
"fi\0"
/* The rest of the configuration is shared */
#include <configs/mxs.h>
#endif /* __CONFIGS_M28EVK_H__ */

View File

@ -1,267 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Aries M53 configuration
* Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
*/
#ifndef __M53EVK_CONFIG_H__
#define __M53EVK_CONFIG_H__
#include <asm/arch/imx-regs.h>
#define CONFIG_REVISION_TAG
#define CONFIG_SYS_FSL_CLK
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
/*
* Memory configurations
*/
#define CONFIG_NR_DRAM_BANKS 2
#define PHYS_SDRAM_1 CSD0_BASE_ADDR
#define PHYS_SDRAM_1_SIZE (gd->bd->bi_dram[0].size)
#define PHYS_SDRAM_2 CSD1_BASE_ADDR
#define PHYS_SDRAM_2_SIZE (gd->bd->bi_dram[1].size)
#define PHYS_SDRAM_SIZE (gd->ram_size)
#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
#define CONFIG_SYS_MEMTEST_START 0x70000000
#define CONFIG_SYS_MEMTEST_END 0x8ff00000
#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1)
#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR)
#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/*
* U-Boot general configurations
*/
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
/* Boot argument buffer size */
/*
* Serial Driver
*/
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART2_BASE
/*
* MMC Driver
*/
#ifdef CONFIG_CMD_MMC
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_ESDHC_NUM 1
#endif
/*
* NAND
*/
#define CONFIG_ENV_SIZE (16 * 1024)
#ifdef CONFIG_CMD_NAND
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR_AXI
#define CONFIG_MXC_NAND_REGS_BASE NFC_BASE_ADDR_AXI
#define CONFIG_MXC_NAND_IP_REGS_BASE NFC_BASE_ADDR
#define CONFIG_SYS_NAND_LARGEPAGE
#define CONFIG_MXC_NAND_HWECC
#define CONFIG_SYS_NAND_USE_FLASH_BBT
/* Environment is in NAND */
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
#define CONFIG_ENV_SECT_SIZE (128 * 1024)
#define CONFIG_ENV_RANGE (4 * CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_OFFSET (8 * CONFIG_ENV_SECT_SIZE) /* 1 MiB */
#define CONFIG_ENV_OFFSET_REDUND \
(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
#endif
/*
* Ethernet on SOC (FEC)
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_FEC_MXC
#define IMX_FEC_BASE FEC_BASE_ADDR
#define CONFIG_FEC_MXC_PHYADDR 0x0
#define CONFIG_MII
#define CONFIG_DISCOVER_PHY
#define CONFIG_FEC_XCV_TYPE RMII
#define CONFIG_ETHPRIME "FEC0"
#endif
/*
* I2C
*/
#ifdef CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_SYS_RTC_BUS_NUM 1 /* I2C2 */
#endif
/*
* RTC
*/
#ifdef CONFIG_CMD_DATE
#define CONFIG_RTC_M41T62
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
#define CONFIG_SYS_M41T11_BASE_YEAR 2000
#endif
/*
* USB
*/
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_EHCI_MX5
#define CONFIG_MXC_USB_PORT 1
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
#endif
/*
* SATA
*/
#ifdef CONFIG_CMD_SATA
#define CONFIG_SYS_SATA_MAX_DEVICE 1
#define CONFIG_DWC_AHSATA_PORT_ID 0
#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_BASE_ADDR
#define CONFIG_LBA48
#endif
/*
* LCD
*/
#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_IPUV3
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_GZIP
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASHIMAGE_GUARD
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20)
#endif
/*
* Boot Linux
*/
#define CONFIG_CMDLINE_TAG
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_BOOTFILE "fitImage"
#define CONFIG_LOADADDR 0x70800000
#define CONFIG_BOOTCOMMAND "run mmc_mmc"
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
/*
* NAND SPL
*/
#define CONFIG_SPL_TARGET "u-boot-with-nand-spl.imx"
#define CONFIG_SPL_TEXT_BASE 0x70008000
#define CONFIG_SPL_PAD_TO 0x8000
#define CONFIG_SPL_STACK 0x70004000
#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
#define CONFIG_SYS_NAND_OOBSIZE 64
#define CONFIG_SYS_NAND_PAGE_COUNT 64
#define CONFIG_SYS_NAND_SIZE (256 * 1024 * 1024)
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
/*
* Extra Environments
*/
#define CONFIG_PREBOOT "run try_bootscript"
#define CONFIG_HOSTNAME "m53evk"
#define CONFIG_EXTRA_ENV_SETTINGS \
"consdev=ttymxc1\0" \
"baudrate=115200\0" \
"bootscript=boot.scr\0" \
"bootdev=/dev/mmcblk0p1\0" \
"rootdev=/dev/mmcblk0p2\0" \
"netdev=eth0\0" \
"rootpath=/opt/eldk-5.5/armv7a-hf/rootfs-qte-sdk\0" \
"kernel_addr_r=0x72000000\0" \
"addcons=" \
"setenv bootargs ${bootargs} " \
"console=${consdev},${baudrate}\0" \
"addip=" \
"setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:" \
"${netmask}:${hostname}:${netdev}:off\0" \
"addmisc=" \
"setenv bootargs ${bootargs} ${miscargs}\0" \
"adddfltmtd=" \
"if test \"x${mtdparts}\" == \"x\" ; then " \
"mtdparts default ; " \
"fi\0" \
"addmtd=" \
"run adddfltmtd ; " \
"setenv bootargs ${bootargs} ${mtdparts}\0" \
"addargs=run addcons addmtd addmisc\0" \
"mmcload=" \
"mmc rescan ; " \
"load mmc 0:1 ${kernel_addr_r} ${bootfile}\0" \
"ubiload=" \
"ubi part UBI ; ubifsmount ubi0:rootfs ; " \
"ubifsload ${kernel_addr_r} /boot/${bootfile}\0" \
"netload=" \
"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
"miscargs=nohlt panic=1\0" \
"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
"ubiargs=" \
"setenv bootargs ubi.mtd=5 " \
"root=ubi0:rootfs rootfstype=ubifs\0" \
"nfsargs=" \
"setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath},v3,tcp\0" \
"mmc_mmc=" \
"run mmcload mmcargs addargs ; " \
"bootm ${kernel_addr_r}\0" \
"mmc_ubi=" \
"run mmcload ubiargs addargs ; " \
"bootm ${kernel_addr_r}\0" \
"mmc_nfs=" \
"run mmcload nfsargs addip addargs ; " \
"bootm ${kernel_addr_r}\0" \
"ubi_mmc=" \
"run ubiload mmcargs addargs ; " \
"bootm ${kernel_addr_r}\0" \
"ubi_ubi=" \
"run ubiload ubiargs addargs ; " \
"bootm ${kernel_addr_r}\0" \
"ubi_nfs=" \
"run ubiload nfsargs addip addargs ; " \
"bootm ${kernel_addr_r}\0" \
"net_mmc=" \
"run netload mmcargs addargs ; " \
"bootm ${kernel_addr_r}\0" \
"net_ubi=" \
"run netload ubiargs addargs ; " \
"bootm ${kernel_addr_r}\0" \
"net_nfs=" \
"run netload nfsargs addip addargs ; " \
"bootm ${kernel_addr_r}\0" \
"try_bootscript=" \
"mmc rescan;" \
"if test -e mmc 0:1 ${bootscript} ; then " \
"if load mmc 0:1 ${kernel_addr_r} ${bootscript};" \
"then ; " \
"echo Running bootscript... ; " \
"source ${kernel_addr_r} ; " \
"fi ; " \
"fi\0"
#endif /* __M53EVK_CONFIG_H__ */

View File

@ -1,217 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Aries MA5D4 configuration
* Copyright (C) 2015 Marek Vasut <marex@denx.de>
*/
#ifndef __MA5D4EVK_CONFIG_H__
#define __MA5D4EVK_CONFIG_H__
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
#include "at91-sama5_common.h"
#define CONFIG_SYS_USE_SERIALFLASH 1
#define CONFIG_BOARD_LATE_INIT
/* Timer */
#define CONFIG_SYS_TIMER_COUNTER 0xfc06863c
/*
* Memory configurations
*/
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SYS_SDRAM_BASE 0x20000000
#define CONFIG_SYS_SDRAM_SIZE 0x10000000
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_INIT_SP_ADDR 0x210000
#else
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
#endif
/*
* Environment
*/
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
#define CONFIG_ENV_SIZE 0x4000
#define CONFIG_SYS_MMC_ENV_DEV 0 /* eMMC */
#define CONFIG_ENV_OFFSET 512 /* just after the MBR */
/*
* U-Boot general configurations
*/
/*
* Serial Driver
*/
#define CONFIG_ATMEL_USART
#define CONFIG_USART_BASE 0xf802c000
#define CONFIG_USART_ID 6
/*
* Ethernet
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_MACB
#define CONFIG_RMII
#define CONFIG_NET_RETRY_COUNT 20
#define CONFIG_MACB_SEARCH_PHY
#define CONFIG_ARP_TIMEOUT 200UL
#define CONFIG_IP_DEFRAG
#endif
/*
* LCD
*/
#ifdef CONFIG_LCD
#define CONFIG_BMP_16BPP
#define CONFIG_BMP_24BPP
#define CONFIG_BMP_32BPP
#define LCD_BPP LCD_COLOR16
#define LCD_OUTPUT_BPP 24
#define CONFIG_ATMEL_HLCD
#endif
/*
* SD/MMC
*/
#ifdef CONFIG_CMD_MMC
#define CONFIG_GENERIC_ATMEL_MCI
#endif
/*
* SPI NOR (boot memory)
*/
#ifdef CONFIG_CMD_SF
#define CONFIG_ATMEL_SPI0
#define CONFIG_SPI_FLASH_ATMEL
#define CONFIG_SF_DEFAULT_BUS 0
#define CONFIG_SF_DEFAULT_CS 0
#define CONFIG_SF_DEFAULT_SPEED 30000000
#endif
/*
* USB
*/
#ifdef CONFIG_CMD_USB
/* USB device */
#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 * 1024 * 1024)
#define DFU_DEFAULT_POLL_TIMEOUT 300
#endif
/*
* Boot Linux
*/
#define CONFIG_CMDLINE_TAG
#define CONFIG_INITRD_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_BOOTFILE "fitImage"
#define CONFIG_LOADADDR 0x20800000
#define CONFIG_BOOTCOMMAND "run mmc_mmc"
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
/*
* Extra Environments
*/
#define CONFIG_PREBOOT "run try_bootscript"
#define CONFIG_HOSTNAME "ma5d4evk"
#define CONFIG_EXTRA_ENV_SETTINGS \
"consdev=ttyS3\0" \
"baudrate=115200\0" \
"bootscript=boot.scr\0" \
"bootdev=/dev/mmcblk0p1\0" \
"bootpart=0:1\0" \
"rootdev=/dev/mmcblk0p2\0" \
"netdev=eth0\0" \
"dfu_alt_info=mmc raw 0 3867148288\0" \
"kernel_addr_r=0x22000000\0" \
"update_spi_firmware_spl_addr=0x21000000\0" \
"update_spi_firmware_spl_filename=boot.bin\0" \
"update_spi_firmware_addr=0x22000000\0" \
"update_spi_firmware_filename=u-boot.img\0" \
"update_spi_firmware=" /* Update the SPI flash firmware */ \
"if sf probe ; then " \
"if tftp ${update_spi_firmware_spl_addr} " \
"${update_spi_firmware_spl_filename} ; then " \
"setenv update_spi_firmware_spl_filesize ${filesize} ; "\
"if tftp ${update_spi_firmware_addr} " \
"${update_spi_firmware_filename} ; then " \
"setenv update_spi_firmware_filesize ${filesize} ; " \
"sf update ${update_spi_firmware_spl_addr} 0x0 " \
"${update_spi_firmware_spl_filesize} ; " \
"sf update ${update_spi_firmware_addr} 0x10000 " \
"${update_spi_firmware_filesize} ; " \
"fi ; " \
"fi ; " \
"fi\0" \
"addcons=" \
"setenv bootargs ${bootargs} " \
"console=${consdev},${baudrate}\0" \
"addip=" \
"setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:" \
"${netmask}:${hostname}:${netdev}:off\0" \
"addmisc=" \
"setenv bootargs ${bootargs} ${miscargs}\0" \
"addargs=run addcons addmisc\0" \
"mmcload=" \
"mmc rescan ; " \
"load mmc ${bootpart} ${kernel_addr_r} ${bootfile}\0" \
"netload=" \
"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
"miscargs=nohlt panic=1\0" \
"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
"nfsargs=" \
"setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath},v3,tcp\0" \
"fdtimg=if test ${bootmode} = \"sf\" ; then " \
"setenv kernel_fdt 1 ; " \
"else ; " \
"setenv kernel_fdt 2 ; " \
"fi\0" \
"mmc_mmc=" \
"run fdtimg mmcload mmcargs addargs ; " \
"bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
"mmc_nfs=" \
"run fdtimg mmcload nfsargs addip addargs ; " \
"bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
"net_mmc=" \
"run fdtimg netload mmcargs addargs ; " \
"bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
"net_nfs=" \
"run fdtimg netload nfsargs addip addargs ; " \
"bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
"try_bootscript=" \
"mmc rescan;" \
"if test -e mmc 1:1 ${bootscript} ; then " \
"if load mmc 1:1 ${kernel_addr_r} ${bootscript};" \
"then ; " \
"echo Running bootscript... ; " \
"source ${kernel_addr_r} ; " \
"fi ; " \
"fi\0"
/* SPL */
#define CONFIG_SPL_TEXT_BASE 0x200000
#define CONFIG_SPL_MAX_SIZE 0x10000
#define CONFIG_SPL_BSS_START_ADDR 0x20000000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
#define CONFIG_SYS_SPL_MALLOC_START 0x20080000
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
#define CONFIG_SYS_MONITOR_LEN (512 << 10)
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000
#define CONFIG_SYS_USE_MMC
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT
#endif /* __MA5D4EVK_CONFIG_H__ */

View File

@ -1,102 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2015 Marek Vasut <marex@denx.de>
*/
#ifndef __CONFIG_ARIES_MCVEVK_H__
#define __CONFIG_ARIES_MCVEVK_H__
#include <asm/arch/base_addr_ac5.h>
/* Memory configurations */
#define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on MCV */
/* Booting Linux */
#define CONFIG_BOOTFILE "fitImage"
#define CONFIG_PREBOOT "run try_bootscript"
#define CONFIG_BOOTCOMMAND "run mmc_mmc"
#define CONFIG_LOADADDR 0x01000000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
/* Environment is in MMC */
#define CONFIG_ENV_OVERWRITE
/* Extra Environment */
#define CONFIG_EXTRA_ENV_SETTINGS \
"consdev=ttyS0\0" \
"baudrate=115200\0" \
"bootscript=boot.scr\0" \
"bootdev=/dev/mmcblk0p2\0" \
"rootdev=/dev/mmcblk0p3\0" \
"netdev=eth0\0" \
"hostname=mcvevk\0" \
"kernel_addr_r=0x10000000\0" \
"dfu_alt_info=mmc raw 0 3867148288\0" \
"update_filename=u-boot-with-spl.sfp\0" \
"update_sd_offset=0x800\0" \
"update_sd=" /* Update the SD firmware partition */ \
"if mmc rescan ; then " \
"if tftp ${update_filename} ; then " \
"setexpr fw_sz ${filesize} / 0x200 ; " /* SD block size */ \
"setexpr fw_sz ${fw_sz} + 1 ; " \
"mmc write ${loadaddr} ${update_sd_offset} ${fw_sz} ; " \
"fi ; " \
"fi\0" \
"update_qspi_offset=0x0\0" \
"update_qspi=" /* Update the QSPI firmware */ \
"if sf probe ; then " \
"if tftp ${update_filename} ; then " \
"sf update ${loadaddr} ${update_qspi_offset} ${filesize} ; " \
"fi ; " \
"fi\0" \
"fpga_filename=output_file.rbf\0" \
"load_fpga=" /* Load FPGA bitstream */ \
"if tftp ${fpga_filename} ; then " \
"fpga load 0 $loadaddr $filesize ; " \
"bridge enable ; " \
"fi\0" \
"addcons=" \
"setenv bootargs ${bootargs} " \
"console=${consdev},${baudrate}\0" \
"addip=" \
"setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:" \
"${netmask}:${hostname}:${netdev}:off\0" \
"addmisc=" \
"setenv bootargs ${bootargs} ${miscargs}\0" \
"addargs=run addcons addmisc\0" \
"mmcload=" \
"mmc rescan ; " \
"load mmc 0:2 ${kernel_addr_r} ${bootfile}\0" \
"netload=" \
"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
"miscargs=nohlt panic=1\0" \
"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
"nfsargs=" \
"setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath},v3,tcp\0" \
"mmc_mmc=" \
"run mmcload mmcargs addargs ; " \
"bootm ${kernel_addr_r}\0" \
"mmc_nfs=" \
"run mmcload nfsargs addip addargs ; " \
"bootm ${kernel_addr_r}\0" \
"net_mmc=" \
"run netload mmcargs addargs ; " \
"bootm ${kernel_addr_r}\0" \
"net_nfs=" \
"run netload nfsargs addip addargs ; " \
"bootm ${kernel_addr_r}\0" \
"try_bootscript=" \
"mmc rescan;" \
"if test -e mmc 0:2 ${bootscript} ; then " \
"if load mmc 0:2 ${kernel_addr_r} ${bootscript};" \
"then ; " \
"echo Running bootscript... ; " \
"source ${kernel_addr_r} ; " \
"fi ; " \
"fi\0"
/* The rest of the configuration is shared */
#include <configs/socfpga_common.h>
#endif /* __CONFIG_ARIES_MCVEVK_H__ */