brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-06-09 23:36:03 +09:00
Code Issues Projects Releases Wiki Activity
6c88079e24
u-boot-brain/board/aries/ma5d4evk/ma5d4evk.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style 
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

457 lines
13 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2015 Marek Vasut <marex@denx.de>
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_rstc.h>
#include <asm/arch/atmel_mpddrc.h>
#include <asm/arch/atmel_usba_udc.h>
#include <asm/arch/gpio.h>
#include <asm/arch/clk.h>
#include <asm/arch/sama5d3_smc.h>
#include <asm/arch/sama5d4.h>
#include <atmel_hlcdc.h>
#include <atmel_mci.h>
#include <lcd.h>
#include <mmc.h>
#include <net.h>
#include <netdev.h>
#include <spi.h>
#include <spi_flash.h>
#include <spl.h>
#include <version.h>
DECLARE_GLOBAL_DATA_PTR;
static u8 boot_mode_sf;
/* FIXME gpio code here need to handle through DM_GPIO */
#ifndef CONFIG_DM_SPI
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
{
return bus == 0 && cs == 0;
}
void spi_cs_activate(struct spi_slave *slave)
{
at91_set_pio_output(AT91_PIO_PORTC, 3, 0);
}
void spi_cs_deactivate(struct spi_slave *slave)
{
at91_set_pio_output(AT91_PIO_PORTC, 3, 1);
}
static void ma5d4evk_spi0_hw_init(void)
{
at91_pio3_set_a_periph(AT91_PIO_PORTC, 0, 0); /* SPI0_MISO */
at91_pio3_set_a_periph(AT91_PIO_PORTC, 1, 0); /* SPI0_MOSI */
at91_pio3_set_a_periph(AT91_PIO_PORTC, 2, 0); /* SPI0_SPCK */
at91_set_pio_output(AT91_PIO_PORTC, 3, 1); /* SPI0_CS0 */
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_SPI0);
}
#endif /* CONFIG_DM_SPI */
#ifdef CONFIG_CMD_USB
static void ma5d4evk_usb_hw_init(void)
{
at91_set_pio_output(AT91_PIO_PORTE, 11, 0);
at91_set_pio_output(AT91_PIO_PORTE, 14, 0);
}
#endif
#ifdef CONFIG_LCD
vidinfo_t panel_info = {
.vl_col = 800,
.vl_row = 480,
.vl_clk = 33500000,
.vl_bpix = LCD_BPP,
.vl_tft = 1,
.vl_hsync_len = 10,
.vl_left_margin = 89,
.vl_right_margin = 164,
.vl_vsync_len = 10,
.vl_upper_margin = 23,
.vl_lower_margin = 10,
.mmio = ATMEL_BASE_LCDC,
};
/* No power up/down pin for the LCD pannel */
void lcd_enable(void) { /* Empty! */ }
void lcd_disable(void) { /* Empty! */ }
unsigned int has_lcdc(void)
{
return 1;
}
static void ma5d4evk_lcd_hw_init(void)
{
at91_pio3_set_a_periph(AT91_PIO_PORTA, 24, 1); /* LCDPWM */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 29, 1); /* LCDDEN */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD9 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD8 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 16, 0); /* LCDD16 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 17, 0); /* LCDD17 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 18, 0); /* LCDD18 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 19, 0); /* LCDD19 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 20, 0); /* LCDD20 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 21, 0); /* LCDD21 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 22, 0); /* LCDD22 */
at91_pio3_set_a_periph(AT91_PIO_PORTA, 23, 0); /* LCDD23 */
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_LCDC);
}
#endif /* CONFIG_LCD */
#ifdef CONFIG_GENERIC_ATMEL_MCI
/* On-SoM eMMC */
void ma5d4evk_mci0_hw_init(void)
{
at91_pio3_set_b_periph(AT91_PIO_PORTC, 5, 1); /* MCI1 CDA */
at91_pio3_set_b_periph(AT91_PIO_PORTC, 6, 1); /* MCI1 DA0 */
at91_pio3_set_b_periph(AT91_PIO_PORTC, 7, 1); /* MCI1 DA1 */
at91_pio3_set_b_periph(AT91_PIO_PORTC, 8, 1); /* MCI1 DA2 */
at91_pio3_set_b_periph(AT91_PIO_PORTC, 9, 1); /* MCI1 DA3 */
at91_pio3_set_b_periph(AT91_PIO_PORTC, 10, 1); /* MCI1 DA4 */
at91_pio3_set_b_periph(AT91_PIO_PORTC, 11, 1); /* MCI1 DA5 */
at91_pio3_set_b_periph(AT91_PIO_PORTC, 12, 1); /* MCI1 DA6 */
at91_pio3_set_b_periph(AT91_PIO_PORTC, 13, 1); /* MCI1 DA7 */
at91_pio3_set_b_periph(AT91_PIO_PORTC, 4, 0); /* MCI1 CLK */
/*
* As the mci io internal pull down is too strong, so if the io needs
* external pull up, the pull up resistor will be very small, if so
* the power consumption will increase, so disable the internal pull
* down to save the power.
*/
at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 5, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 6, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 7, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 8, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 9, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 10, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 11, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 12, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 13, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 4, 0);
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_MCI0);
}
/* On-board MicroSD slot */
void ma5d4evk_mci1_hw_init(void)
{
at91_pio3_set_c_periph(AT91_PIO_PORTE, 19, 1); /* MCI1 CDA */
at91_pio3_set_c_periph(AT91_PIO_PORTE, 20, 1); /* MCI1 DA0 */
at91_pio3_set_c_periph(AT91_PIO_PORTE, 21, 1); /* MCI1 DA1 */
at91_pio3_set_c_periph(AT91_PIO_PORTE, 22, 1); /* MCI1 DA2 */
at91_pio3_set_c_periph(AT91_PIO_PORTE, 23, 1); /* MCI1 DA3 */
at91_pio3_set_c_periph(AT91_PIO_PORTE, 18, 0); /* MCI1 CLK */
/*
* As the mci io internal pull down is too strong, so if the io needs
* external pull up, the pull up resistor will be very small, if so
* the power consumption will increase, so disable the internal pull
* down to save the power.
*/
at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 18, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 19, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 20, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 21, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 22, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 23, 0);
/* Deal with WP pin on the microSD slot. */
at91_set_pio_output(AT91_PIO_PORTE, 16, 0);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 16, 1);
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_MCI1);
}
int board_mmc_init(bd_t *bis)
{
int ret;
void *mci0 = (void *)ATMEL_BASE_MCI0;
void *mci1 = (void *)ATMEL_BASE_MCI1;
/* De-assert reset on On-SoM eMMC */
at91_set_pio_output(AT91_PIO_PORTE, 15, 1);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 15, 0);
ret = atmel_mci_init(boot_mode_sf ? mci0 : mci1);
if (ret) /* eMMC init failed, skip it. */
at91_set_pio_output(AT91_PIO_PORTE, 15, 0);
/* Enable the power supply to On-board MicroSD */
at91_set_pio_output(AT91_PIO_PORTE, 17, 0);
ret = atmel_mci_init(boot_mode_sf ? mci1 : mci0);
if (ret) /* uSD init failed, power it down. */
at91_set_pio_output(AT91_PIO_PORTE, 17, 1);
return 0;
}
#endif /* CONFIG_GENERIC_ATMEL_MCI */
#ifdef CONFIG_MACB
void ma5d4evk_macb0_hw_init(void)
{
at91_pio3_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ETXCK_EREFCK */
at91_pio3_set_a_periph(AT91_PIO_PORTB, 6, 0); /* ERXDV */
at91_pio3_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ERX0 */
at91_pio3_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ERX1 */
at91_pio3_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ERXER */
at91_pio3_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ETXEN */
at91_pio3_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX0 */
at91_pio3_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ETX1 */
at91_pio3_set_a_periph(AT91_PIO_PORTB, 17, 0); /* EMDIO */
at91_pio3_set_a_periph(AT91_PIO_PORTB, 16, 0); /* EMDC */
/* Enable clock */
at91_periph_clk_enable(ATMEL_ID_GMAC0);
}
#endif
static void ma5d4evk_serial_hw_init(void)
{
/* USART0 */
at91_pio3_set_a_periph(AT91_PIO_PORTD, 13, 1); /* TXD */
at91_pio3_set_a_periph(AT91_PIO_PORTD, 12, 0); /* RXD */
at91_pio3_set_a_periph(AT91_PIO_PORTD, 11, 0); /* RTS */
at91_pio3_set_a_periph(AT91_PIO_PORTD, 10, 0); /* CTS */
at91_periph_clk_enable(ATMEL_ID_USART0);
/* USART1 */
at91_pio3_set_a_periph(AT91_PIO_PORTD, 17, 1); /* TXD */
at91_pio3_set_a_periph(AT91_PIO_PORTD, 16, 0); /* RXD */
at91_pio3_set_a_periph(AT91_PIO_PORTD, 15, 0); /* RTS */
at91_pio3_set_a_periph(AT91_PIO_PORTD, 14, 0); /* CTS */
at91_periph_clk_enable(ATMEL_ID_USART1);
}
int board_early_init_f(void)
{
at91_periph_clk_enable(ATMEL_ID_PIOA);
at91_periph_clk_enable(ATMEL_ID_PIOB);
at91_periph_clk_enable(ATMEL_ID_PIOC);
at91_periph_clk_enable(ATMEL_ID_PIOD);
at91_periph_clk_enable(ATMEL_ID_PIOE);
/* Configure LEDs as OFF */
at91_set_pio_output(AT91_PIO_PORTD, 28, 0);
at91_set_pio_output(AT91_PIO_PORTD, 29, 0);
at91_set_pio_output(AT91_PIO_PORTD, 30, 0);
ma5d4evk_serial_hw_init();
return 0;
}
static void board_identify(void)
{
struct spi_flash *sf;
sf = spi_flash_probe(CONFIG_SF_DEFAULT_BUS, CONFIG_SF_DEFAULT_CS,
CONFIG_SF_DEFAULT_SPEED, CONFIG_SF_DEFAULT_MODE);
boot_mode_sf = (sf != NULL);
}
int board_init(void)
{
/* adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
#ifndef CONFIG_DM_SPI
ma5d4evk_spi0_hw_init();
#endif
#ifdef CONFIG_GENERIC_ATMEL_MCI
ma5d4evk_mci0_hw_init();
ma5d4evk_mci1_hw_init();
#endif
#ifdef CONFIG_MACB
ma5d4evk_macb0_hw_init();
#endif
#ifdef CONFIG_LCD
ma5d4evk_lcd_hw_init();
#endif
#ifdef CONFIG_CMD_USB
ma5d4evk_usb_hw_init();
#endif
#ifdef CONFIG_USB_GADGET_ATMEL_USBA
at91_udp_hw_init();
#endif
board_identify();
/* Reset CAN controllers */
at91_set_pio_output(AT91_PIO_PORTB, 21, 0);
udelay(100);
at91_set_pio_output(AT91_PIO_PORTB, 21, 1);
at91_pio3_set_pio_pulldown(AT91_PIO_PORTB, 21, 0);
return 0;
}
int board_late_init(void)
{
env_set("bootmode", boot_mode_sf ? "sf" : "emmc");
return 0;
}
int dram_init(void)
{
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
CONFIG_SYS_SDRAM_SIZE);
return 0;
}
int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_MACB
rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC0, 0x00);
#endif
#ifdef CONFIG_USB_GADGET_ATMEL_USBA
usba_udc_probe(&pdata);
#ifdef CONFIG_USB_ETH_RNDIS
usb_eth_initialize(bis);
#endif
#endif
return rc;
}
/* SPL */
#ifdef CONFIG_SPL_BUILD
void spl_board_init(void)
{
#ifndef CONFIG_DM_SPI
ma5d4evk_spi0_hw_init();
#endif
#ifdef CONFIG_GENERIC_ATMEL_MCI
ma5d4evk_mci0_hw_init();
ma5d4evk_mci1_hw_init();
#endif
board_identify();
}
void board_boot_order(u32 *spl_boot_list)
{
spl_boot_list[0] = spl_boot_device();
switch (spl_boot_list[0]) {
case BOOT_DEVICE_MMC1:
case BOOT_DEVICE_MMC2:
spl_boot_list[0] = BOOT_DEVICE_MMC1;
break;
case BOOT_DEVICE_SPI:
break;
case BOOT_DEVICE_USB:
spl_boot_list[0] = BOOT_DEVICE_MMC2;
break;
}
}
static void ddr2_conf(struct atmel_mpddrc_config *ddr2)
{
ddr2->md = (ATMEL_MPDDRC_MD_DBW_32_BITS | ATMEL_MPDDRC_MD_DDR2_SDRAM);
ddr2->cr = (ATMEL_MPDDRC_CR_NC_COL_10 |
ATMEL_MPDDRC_CR_NR_ROW_13 |
ATMEL_MPDDRC_CR_CAS_DDR_CAS3 |
ATMEL_MPDDRC_CR_NB_8BANKS |
ATMEL_MPDDRC_CR_NDQS_DISABLED |
ATMEL_MPDDRC_CR_UNAL_SUPPORTED);
ddr2->rtr = 0x2b0;
ddr2->tpr0 = (8 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET |
3 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET |
3 << ATMEL_MPDDRC_TPR0_TWR_OFFSET |
10 << ATMEL_MPDDRC_TPR0_TRC_OFFSET |
3 << ATMEL_MPDDRC_TPR0_TRP_OFFSET |
2 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET |
2 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET |
2 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET);
ddr2->tpr1 = (2 << ATMEL_MPDDRC_TPR1_TXP_OFFSET |
200 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET |
25 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET |
23 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET);
ddr2->tpr2 = (7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET |
2 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET |
3 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET |
2 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET |
8 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET);
}
void mem_init(void)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
struct atmel_mpddrc_config ddr2;
ddr2_conf(&ddr2);
/* enable MPDDR clock */
at91_periph_clk_enable(ATMEL_ID_MPDDRC);
writel(AT91_PMC_DDR, &pmc->scer);
/* DDRAM2 Controller initialize */
ddr2_init(ATMEL_BASE_MPDDRC, ATMEL_BASE_DDRCS, &ddr2);
}
void at91_pmc_init(void)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
u32 tmp;
tmp = AT91_PMC_PLLAR_29 |
AT91_PMC_PLLXR_PLLCOUNT(0x3f) |
AT91_PMC_PLLXR_MUL(87) |
AT91_PMC_PLLXR_DIV(1);
at91_plla_init(tmp);
writel(0x0 << 8, &pmc->pllicpr);
tmp = AT91_PMC_MCKR_H32MXDIV |
AT91_PMC_MCKR_PLLADIV_2 |
AT91_PMC_MCKR_MDIV_3 |
AT91_PMC_MCKR_CSS_PLLA;
at91_mck_init(tmp);
}
#endif
Reference in New Issue View Git Blame Copy Permalink