brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-06-09 23:36:03 +09:00
Code Issues Projects Releases Wiki Activity

imx6: aristainetos: prepare dts for other board versions

Browse Source 
as we switch to support DM and DTS, rework the existing
DTS trees. Change also Linux specific Device trees, goal
is to push this changes to linux.

Collect U-Boot specific changes in separate "*u-boot*" dts
files.

Signed-off-by: Heiko Schocher <hs@denx.de>
This commit is contained in:
Heiko Schocher 2019-12-01 11:23:12 +01:00 committed by Stefano Babic
parent 0f1130b6a1
commit ccc7595a81
12 changed files with 941 additions and 581 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
arch/arm/dts/imx6dl-aristainetos2_4-u-boot.dtsi Normal file
View File

@ -0,0 +1,13 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2019 Heiko Schocher <hs@denx.de>
*/
#include <imx6qdl-aristainetos2-u-boot.dtsi>
&lcd_panel {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp>;
enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
backlight = <&backlight>;
};

79
arch/arm/dts/imx6dl-aristainetos2_4.dts
View File

@ -1,46 +1,21 @@
// SPDX-License-Identifier: (GPL-2.0)
/*
* support for the imx6 based aristainetos2 board
* parts for 4.3 inch LG display on spi1 port0
*
* Copyright (C) 2019 Heiko Schocher <hs@denx.de>
* Copyright (C) 2015 Heiko Schocher <hs@denx.de>
*
*/
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6dl-aristainetos2_4.dtsi"
#include "imx6qdl-aristainetos2.dtsi"
/ {
model = "aristainetos2 i.MX6 Dual Lite Board 4";
compatible = "fsl,imx6dl";
memory@10000000 {
device_type = "memory";
reg = <0x10000000 0x40000000>;
};
display0: disp0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp>;
port@0 {
reg = <0>;
display0_in: endpoint {
remote-endpoint = <&ipu1_di0_disp0>;
};
};
port@1 {
reg = <1>;
display_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
};
&ecspi1 {
@ -74,51 +49,3 @@
};
};
};
&i2c3 {
touch: touch@4b {
compatible = "atmel,maxtouch";
reg = <0x4b>;
interrupt-parent = <&gpio2>;
interrupts = <9 8>;
};
};
&ipu1_di0_disp0 {
remote-endpoint = <&display0_in>;
};
&iomuxc {
pinctrl_ipu_disp: ipudisp1grp {
fsl,pins = <
MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x31
MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0xE1
MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0xE1
MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0xE1
MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0xE1
MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0xE1
MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0xE1
MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0xE1
MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0xE1
MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0xE1
MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0xE1
MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0xE1
MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0xE1
MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0xE1
MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0xE1
MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0xE1
MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0xe1
MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0xE1
MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0xE1
MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0xE1
MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0xE1
MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0xE1
MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0xE1
MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0xE1
MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0xE1
MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0xE1
>;
};
};

84
arch/arm/dts/imx6dl-aristainetos2_4.dtsi Normal file
View File

@ -0,0 +1,84 @@
// SPDX-License-Identifier: (GPL-2.0)
/*
* support for the imx6 based aristainetos2 board
* parts for 4.3 inch LG display on the parallel port and atmel maxtouch
*
* Copyright (C) 2019 Heiko Schocher <hs@denx.de>
* Copyright (C) 2015 Heiko Schocher <hs@denx.de>
*
*/
/dts-v1/;
#include "imx6dl.dtsi"
/ {
display0: disp0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp>;
port@0 {
reg = <0>;
display0_in: endpoint {
remote-endpoint = <&ipu1_di0_disp0>;
};
};
port@1 {
reg = <1>;
display_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
};
&i2c3 {
touch: touch@4b {
compatible = "atmel,maxtouch";
reg = <0x4b>;
interrupt-parent = <&gpio2>;
interrupts = <9 8>;
};
};
&ipu1_di0_disp0 {
remote-endpoint = <&display0_in>;
};
&iomuxc {
pinctrl_ipu_disp: ipudisp1grp {
fsl,pins = <
MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x31
MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0xE1
MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0xE1
MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0xE1
MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0xE1
MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0xE1
MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0xE1
MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0xE1
MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0xE1
MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0xE1
MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0xE1
MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0xE1
MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0xE1
MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0xE1
MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0xE1
MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0xE1
MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0xe1
MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0xE1
MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0xE1
MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0xE1
MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0xE1
MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0xE1
MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0xE1
MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0xE1
MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0xE1
MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0xE1
>;
};
};

19
arch/arm/dts/imx6dl-aristainetos2_7-u-boot.dtsi Normal file
View File

@ -0,0 +1,19 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2019 Heiko Schocher <hs@denx.de>
*/
#include <imx6qdl-aristainetos2-u-boot.dtsi>
/ {
vdd_panel_reg: regulator-panel {
compatible = "regulator-fixed";
regulator-name = "panel_regulator";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
&panel0 {
power-supply = <&vdd_panel_reg>;
};

50
arch/arm/dts/imx6dl-aristainetos2_7.dts
View File

@ -7,58 +7,10 @@
*
*/
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6dl-aristainetos2_7.dtsi"
#include "imx6qdl-aristainetos2.dtsi"
/ {
model = "aristainetos2 i.MX6 Dual Lite Board 7";
compatible = "fsl,imx6dl";
memory@10000000 {
device_type = "memory";
reg = <0x10000000 0x40000000>;
};
panel: panel {
compatible = "lg,lb070wv8";
backlight = <&backlight>;
enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
port {
panel_in: endpoint {
remote-endpoint = <&lvds0_out>;
};
};
};
};
&i2c3 {
touch: touch@4d {
compatible = "atmel,maxtouch";
reg = <0x4d>;
interrupt-parent = <&gpio2>;
interrupts = <9 8>;
};
};
&ldb {
status = "okay";
lvds-channel@0 {
status = "okay";
port@0 {
reg = <0>;
lvds0_in: endpoint {
remote-endpoint = <&ipu1_di0_lvds0>;
};
};
port@4 {
reg = <4>;
lvds0_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
};

58
arch/arm/dts/imx6dl-aristainetos2_7.dtsi Normal file
View File

@ -0,0 +1,58 @@
// SPDX-License-Identifier: (GPL-2.0)
/*
* support for the imx6 based aristainetos2 board
* parts for 7 inch LG display connected to the LVDS port and atmel maxtouch
*
* Copyright (C) 2019 Heiko Schocher <hs@denx.de>
* Copyright (C) 2015 Heiko Schocher <hs@denx.de>
*
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "imx6dl.dtsi"
/ {
panel0: panel_lg {
compatible = "lg,lb070wv8";
backlight = <&backlight>;
enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
port {
panel_in: endpoint {
remote-endpoint = <&lvds0_out>;
};
};
};
};
&i2c3 {
touch: touch@4d {
compatible = "atmel,maxtouch";
reg = <0x4d>;
interrupt-parent = <&gpio2>;
interrupts = <9 8>;
};
};
&ldb {
status = "okay";
lvds-channel@0 {
status = "okay";
port@0 {
reg = <0>;
lvds0_in: endpoint {
remote-endpoint = <&ipu1_di0_lvds0>;
};
};
port@4 {
reg = <4>;
lvds0_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
};

492
arch/arm/dts/imx6qdl-aristainetos2-common.dtsi Normal file
View File

@ -0,0 +1,492 @@
// SPDX-License-Identifier: (GPL-2.0)
/*
* support for the imx6 based aristainetos2 board
* parts common to all versions
*
* Copyright (C) 2019 Heiko Schocher <hs@denx.de>
* Copyright (C) 2015 Heiko Schocher <hs@denx.de>
*
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/imx6qdl-clock.h>
/ {
aliases {
eeprom0 = &i2c_eeprom0;
pmic0 = &i2c_pmic0;
};
memory@10000000 {
device_type = "memory";
reg = <0x10000000 0x40000000>;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm1 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
enable-gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
};
reg_2p5v: regulator-2p5v {
compatible = "regulator-fixed";
regulator-name = "2P5V";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_usbh1_vbus: regulator-usbh1-vbus {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_aristainetos2_usbh1_vbus>;
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
reg_usbotg_vbus: regulator-usbotg-vbus {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_aristainetos2_usbotg_vbus>;
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
};
&audmux {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux>;
status = "okay";
};
&ecspi2 {
cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH &gpio2 27 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
i2c_pmic0: pmic@58 {
compatible = "dlg,da9063";
/* the pmic uses addr 0x58 and 0x59 */
reg = <0x58>;
interrupt-parent = <&gpio1>;
interrupts = <04 0x8>;
regulators {
bcore1 {
regulator-name = "bcore1";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
bcore2 {
regulator-name = "bcore2";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
bpro {
regulator-name = "bpro";
regulator-always-on = <1>;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
bprob {
regulator-name = "bprob";
regulator-always-on = <1>;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
bperi {
regulator-name = "bperi";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
bmem {
regulator-name = "bmem";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo2 {
regulator-name = "ldo2";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1800000>;
};
ldo3 {
regulator-name = "ldo3";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo4 {
regulator-name = "ldo4";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo5 {
regulator-name = "ldo5";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo6 {
regulator-name = "ldo6";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo7 {
regulator-name = "ldo7";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo8 {
regulator-name = "ldo8";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo9 {
regulator-name = "ldo9";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo10 {
regulator-name = "ldo10";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo11 {
regulator-name = "ldo11";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
bio {
regulator-name = "bio";
regulator-always-on = <1>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
};
};
tmp103: tmp103@71 {
compatible = "ti,tmp103";
reg = <0x71>;
};
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
expander: tca6416@20 {
compatible = "ti,tca6416";
reg = <0x20>;
#gpio-cells = <2>;
gpio-controller;
env_reset {
gpio-hog;
input;
gpios = <6 GPIO_ACTIVE_LOW>;
};
boot_rescue {
gpio-hog;
input;
gpios = <7 GPIO_ACTIVE_LOW>;
};
};
rtc@68 {
compatible = "st,m41t11";
reg = <0x68>;
};
};
&i2c4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
status = "okay";
i2c_eeprom0: eeprom@50{
compatible = "atmel,24c64";
reg = <0x50>;
pagesize = <32>;
};
i2c_eeprom1: eeprom@57{
compatible = "atmel,24c64";
reg = <0x57>;
pagesize = <32>;
};
};
&gpio6 {
spi_bus_ena {
gpio-hog;
output-high;
gpios = <6 GPIO_ACTIVE_HIGH>;
};
};
&gpio7 {
bootsel0 {
gpio-hog;
input;
gpios = <6 GPIO_ACTIVE_HIGH>;
};
bootsel1 {
gpio-hog;
input;
gpios = <7 GPIO_ACTIVE_HIGH>;
};
bootsel2 {
gpio-hog;
input;
gpios = <1 GPIO_ACTIVE_HIGH>;
};
soft_reset {
gpio-hog;
output-high;
gpios = <13 GPIO_ACTIVE_HIGH>;
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
txd0-skew-ps = <0>;
txd1-skew-ps = <0>;
txd2-skew-ps = <0>;
txd3-skew-ps = <0>;
status = "okay";
};
&pcie {
reset-gpio = <&gpio2 16 GPIO_ACTIVE_LOW>;
status = "okay";
};
&pwm1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
uart-has-rtscts;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
uart-has-rtscts;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
status = "okay";
};
&usbh1 {
vbus-supply = <&reg_usbh1_vbus>;
dr_mode = "host";
status = "okay";
};
&usbotg {
vbus-supply = <&reg_usbotg_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
disable-over-current;
dr_mode = "host"; /* fixed configuration, ID pin not checked */
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio>;
pinctrl_audmux: audmux {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0
MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0
MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0
MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
>;
};
pinctrl_ecspi2: ecspi2grp {
fsl,pins = <
MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1 /* SS0# */
MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x100b1 /* SS1# */
>;
};
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x400100b0
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
/* make sure pin is GPIO and not ENET_REF_CLK */
MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x1a0b0
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins = <
MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1
MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1
>;
};
pinctrl_pwm1: pwm1grp {
fsl,pins = <
MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b0
/* backlight enable */
MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x1b0b1
MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x1b0b1
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
>;
};
pinctrl_uart4: uart4grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
>;
};
pinctrl_aristainetos2_usbh1_vbus: aristainetos-usbh1-vbus {
fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x400130b0>;
};
pinctrl_aristainetos2_usbotg_vbus: aristainetos-usbotg-vbus {
fsl,pins = <MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x400130b0>;
};
};

101
arch/arm/dts/imx6qdl-aristainetos2-u-boot.dtsi Normal file
View File

@ -0,0 +1,101 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2019 Heiko Schocher <hs@denx.de>
*/
/ {
chosen {
u-boot,dm-pre-reloc;
stdout-path = &uart2;
};
wdt-reboot {
compatible = "wdt-reboot";
wdt = <&wdog1>;
};
};
&uart2 {
u-boot,dm-pre-reloc;
};
&pinctrl_gpio {
u-boot,dm-pre-reloc;
};
&pinctrl_uart2 {
u-boot,dm-pre-reloc;
};
&aips2 {
u-boot,dm-pre-reloc;
};
&backlight {
pwms = <&pwm1 0 300000>;
default-brightness-level = <2>;
};
/*
* allow switching write protect pin by gpio,
* because "pinctrl-assert-gpios" from &ecspi1 isn't handled by u-boot
*/
&gpio2 {
u-boot,dm-pre-reloc;
wp_spi_nor {
gpio-hog;
output-high;
gpios = <15 GPIO_ACTIVE_HIGH>;
};
};
&iomuxc {
pinctrl-0 = <&pinctrl_gpio &pinctrl_gpio_fix>;
u-boot,dm-pre-reloc;
pinctrl_gpio_fix: gpiofixgrp {
/*
* usdhc2 has a levelshifter on the carrier board Rev. DV1,
* that will automatically detect the driving direction.
* During initialisation this isn't working correctly,
* which causes DAT3 to be driven low towards the SD-card.
* This causes a SD-card enetring the SPI-Mode
* and therefore getting inaccessible until next power cycle.
* As workaround we drive the DAT3 line as GPIO and set it high.
* This makes usdhc2 unusable in u-boot, but works for the
* initialisation in Linux
*/
fsl,pins = <
MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x20000
>;
};
};
&gpio1 {
usdhc_fix {
gpio-hog;
output-high;
gpios = <12 GPIO_ACTIVE_HIGH>;
};
};
&gpio3 {
u-boot,dm-pre-reloc;
};
&gpio5 {
u-boot,dm-pre-reloc;
};
&ecspi4 {
u-boot,dm-pre-reloc;
};
&flash {
u-boot,dm-pre-reloc;
};
&pinctrl_ecspi4 {
u-boot,dm-pre-reloc;
};

541
arch/arm/dts/imx6qdl-aristainetos2.dtsi
View File

@ -9,57 +9,79 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/imx6qdl-clock.h>
#include "imx6qdl-aristainetos2-common.dtsi"
/ {
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm1 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
enable-gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
};
reg_2p5v: regulator-2p5v {
compatible = "regulator-fixed";
regulator-name = "2P5V";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_usbh1_vbus: regulator-usbh1-vbus {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_aristainetos2_usbh1_vbus>;
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
pinctrl-0 = <&pinctrl_gpio>;
reg_usbotg_vbus: regulator-usbotg-vbus {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_aristainetos2_usbotg_vbus>;
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
LED_blue {
label = "led_blue";
gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
};
LED_green {
label = "led_green";
gpios = <&gpio5 4 GPIO_ACTIVE_LOW>;
};
LED_red {
label = "led_red";
gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
};
LED_yellow {
label = "led_yellow";
gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;
};
LED_ena {
label = "led_ena";
gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
};
};
};
&audmux {
&ecspi1 {
fsl,spi-num-chipselects = <3>;
cs-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH
&gpio4 10 GPIO_ACTIVE_HIGH
&gpio4 11 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux>;
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
};
&ecspi4 {
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi4>;
status = "okay";
pinctrl-assert-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
flash: m25p80@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q128a11", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <1>;
};
};
&gpio7 {
sd2_driver_ena {
gpio-hog;
output-high;
gpios = <8 GPIO_ACTIVE_HIGH>;
};
};
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand>;
status = "okay";
};
@ -75,279 +97,6 @@
status = "okay";
};
&ecspi1 {
cs-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH
&gpio4 10 GPIO_ACTIVE_HIGH
&gpio4 11 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
};
&ecspi2 {
cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH &gpio2 27 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
status = "okay";
};
&ecspi4 {
cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi4>;
status = "okay";
flash: m25p80@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q128a11", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <1>;
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
pmic@58 {
compatible = "dlg,da9063";
reg = <0x58>;
interrupt-parent = <&gpio1>;
interrupts = <04 0x8>;
regulators {
bcore1 {
regulator-name = "bcore1";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
bcore2 {
regulator-name = "bcore2";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
bpro {
regulator-name = "bpro";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
bperi {
regulator-name = "bperi";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
bmem {
regulator-name = "bmem";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo2 {
regulator-name = "ldo2";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1800000>;
};
ldo3 {
regulator-name = "ldo3";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo4 {
regulator-name = "ldo4";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo5 {
regulator-name = "ldo5";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo6 {
regulator-name = "ldo6";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo7 {
regulator-name = "ldo7";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo8 {
regulator-name = "ldo8";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo9 {
regulator-name = "ldo9";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo10 {
regulator-name = "ldo10";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo11 {
regulator-name = "ldo11";
regulator-always-on = <1>;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
bio {
regulator-name = "bio";
regulator-always-on = <1>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
};
};
tmp103: tmp103@71 {
compatible = "ti,tmp103";
reg = <0x71>;
};
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
expander: tca6416@20 {
compatible = "ti,tca6416";
reg = <0x20>;
#gpio-cells = <2>;
gpio-controller;
};
rtc@68 {
compatible = "dallas,m41t00";
reg = <0x68>;
};
};
&i2c4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
status = "okay";
eeprom@50{
compatible = "atmel,24c64";
reg = <0x50>;
};
eeprom@57{
compatible = "atmel,24c64";
reg = <0x57>;
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio7 18 GPIO_ACTIVE_LOW>;
txd0-skew-ps = <0>;
txd1-skew-ps = <0>;
txd2-skew-ps = <0>;
txd3-skew-ps = <0>;
status = "okay";
};
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand>;
status = "okay";
};
&pcie {
reset-gpio = <&gpio2 16 GPIO_ACTIVE_LOW>;
status = "okay";
};
&pwm1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
uart-has-rtscts;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
uart-has-rtscts;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
status = "okay";
};
&usbh1 {
vbus-supply = <&reg_usbh1_vbus>;
dr_mode = "host";
status = "okay";
};
&usbotg {
vbus-supply = <&reg_usbotg_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
disable-over-current;
dr_mode = "host";
status = "okay";
};
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
@ -366,18 +115,6 @@
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio>;
pinctrl_audmux: audmux {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0
MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0
MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0
MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
>;
};
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
@ -389,16 +126,6 @@
>;
};
pinctrl_ecspi2: ecspi2grp {
fsl,pins = <
MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1 /* SS0# */
MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x100b1 /* SS1# */
>;
};
pinctrl_ecspi4: ecspi4grp {
fsl,pins = <
MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
@ -406,72 +133,40 @@
MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x100b1 /* SS0# */
MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b1 /* SS1# */
MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 /* WP pin */
>;
};
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
>;
};
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0
MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0
>;
};
pinctrl_flexcan2: flexcan2grp {
fsl,pins = <
MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0
MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0
MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x4001b0b0 /* WP pin */
>;
};
pinctrl_gpio: gpiogrp {
fsl,pins = <
/* led enable */
MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x4001b0b0
/* LCD power enable */
MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x4001b0b0
/* led yellow */
MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0
MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x4001b0b0
/* led red */
MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b0
MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x4001b0b0
/* led green */
MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b0b0
MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x4001b0b0
/* led blue */
MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b0
MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x4001b0b0
/* Profibus IRQ */
MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0
/* FPGA IRQ */
/* FPGA IRQ currently unused*/
MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0
/* Display reset because of clock failure */
MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x4001b0b0
/* spi bus #2 SS driver enable */
MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x1b0b0
MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x4001b0b0
/* RST_LOC# PHY reset input (has pull-down!)*/
MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x4001b0b0
/* USB_OTG_ID = GPIO1_24*/
MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x80000000
MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x4001b0b0
/* Touchscreen IRQ */
MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0
/* PCIe reset */
MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x1b0b0
MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x4001b0b0
>;
};
@ -495,71 +190,17 @@
>;
};
pinctrl_i2c1: i2c1grp {
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0
MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0
>;
};
pinctrl_i2c2: i2c2grp {
pinctrl_flexcan2: flexcan2grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins = <
MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1
MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1
>;
};
pinctrl_pwm1: pwm1grp {
fsl,pins = <
MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b0
/* backlight enable */
MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x1b0b1
MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x1b0b1
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
>;
};
pinctrl_uart4: uart4grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0
MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0
>;
};
@ -569,14 +210,6 @@
>;
};
pinctrl_aristainetos2_usbh1_vbus: aristainetos-usbh1-vbus {
fsl,pins = <MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x130b0>;
};
pinctrl_aristainetos2_usbotg_vbus: aristainetos-usbotg-vbus {
fsl,pins = <MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR 0x130b0>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
@ -601,7 +234,7 @@
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x71
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x71
/* SD2 level shifter output enable */
MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b0b0
MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x4001b0b0
/* SD2 card detect input */
MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
/* SD2 write protect input */

10
board/aristainetos/MAINTAINERS
View File

@ -4,6 +4,12 @@ S: Maintained
F: board/aristainetos/
F: include/configs/aristainetos2.h
F: configs/aristainetos2_defconfig
F: arch/arm/dts/imx6dl-aristainetos2_4.dts
F: arch/arm/dts/imx6dl-aristainetos2_7.dts
F: arch/arm/dts/imx6qdl-aristainetos2.dtsi
F: arch/arm/dts/imx6qdl-aristainetos2-common.dtsi
F: arch/arm/dts/imx6qdl-aristainetos2-u-boot.dtsi
F: arch/arm/dts/imx6dl-aristainetos2_7.dts
F: arch/arm/dts/imx6dl-aristainetos2_7.dtsi
F: arch/arm/dts/imx6dl-aristainetos2_7-u-boot.dtsi
F: arch/arm/dts/imx6dl-aristainetos2_4.dts
F: arch/arm/dts/imx6dl-aristainetos2_4.dtsi
F: arch/arm/dts/imx6dl-aristainetos2_4-u-boot.dtsi

68
board/aristainetos/aristainetos.c
View File

@ -31,6 +31,7 @@
#include <asm/io.h>
#include <asm/arch/sys_proto.h>
#include <pwm.h>
#include <dm/root.h>
#include <env.h>
#include <micrel.h>
#include <spi.h>
@ -82,6 +83,14 @@ DECLARE_GLOBAL_DATA_PTR;
#define SOFT_RESET_GPIO IMX_GPIO_NR(7, 13)
#define SD2_DRIVER_ENABLE IMX_GPIO_NR(7, 8)
enum {
BOARD_TYPE_4 = 4,
BOARD_TYPE_7 = 7,
};
#define ARI_BT_4 "aristainetos2_4@2"
#define ARI_BT_7 "aristainetos2_7@1"
struct i2c_pads_info i2c_pad_info3 = {
.scl = {
.i2c_mode = MX6_PAD_GPIO_5__I2C3_SCL | PC,
@ -617,6 +626,7 @@ static void set_gpr_register(void)
&iomuxc_regs->gpr[12]);
}
extern char __bss_start[], __bss_end[];
int board_early_init_f(void)
{
setup_iomux_uart();
@ -626,6 +636,14 @@ int board_early_init_f(void)
gpio_direction_output(SD2_DRIVER_ENABLE, 1);
setup_display();
set_gpr_register();
/*
* clear bss here, so we can use spi driver
* before relocation and read Environment
* from spi flash.
*/
memset(__bss_start, 0x00, __bss_end - __bss_start);
return 0;
}
@ -704,6 +722,12 @@ int board_late_init(void)
CONFIG_LG4573_CS,
10000000, SPI_MODE_0);
/* set board_type */
if (gd->board_type == BOARD_TYPE_4)
env_set("board_type", ARI_BT_4);
else
env_set("board_type", ARI_BT_7);
return 0;
}
@ -962,6 +986,50 @@ int board_ehci_power(int port, int on)
gpio_set_value(ARISTAINETOS_USB_OTG_PWR, on);
else
gpio_set_value(ARISTAINETOS_USB_H1_PWR, on);
return 0;
}
#endif
int board_fit_config_name_match(const char *name)
{
if (gd->board_type == BOARD_TYPE_4 &&
strchr(name, 0x34))
return 0;
if (gd->board_type == BOARD_TYPE_7 &&
strchr(name, 0x37))
return 0;
return -1;
}
static void do_board_detect(void)
{
int ret;
char s[30];
/* default use board type 7 */
gd->board_type = BOARD_TYPE_7;
if (env_init())
return;
ret = env_get_f("panel", s, sizeof(s));
if (ret < 0)
return;
if (!strncmp("lg4573", s, 6))
gd->board_type = BOARD_TYPE_4;
}
#ifdef CONFIG_DTB_RESELECT
int embedded_dtb_select(void)
{
int rescan;
do_board_detect();
fdtdec_resetup(&rescan);
return 0;
}
#endif

7
configs/aristainetos2_defconfig
View File

@ -15,6 +15,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_BOUNCE_BUFFER=y
CONFIG_BOARD_TYPES=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
@ -42,7 +43,13 @@ CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_CMD_MTDPARTS=y
CONFIG_CMD_UBI=y
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="imx6dl-aristainetos2_4"
CONFIG_OF_LIST="imx6dl-aristainetos2_4 imx6dl-aristainetos2_7"
CONFIG_DTB_RESELECT=y
CONFIG_MULTI_DTB_FIT=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_ENV_SPI_EARLY=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_ENV_OFFSET_REDUND=0xE0000
CONFIG_SYS_RELOC_GD_ENV_ADDR=y