Commit Graph

19321 Commits

Author SHA1 Message Date
Stefan Roese
5039aae3fb arm: kirkwood: openrd: Increase U-Boot size in flash to make it fit
We have run now multiple times into size issues with the openrd
board port. To finally fix this, this patch now moves the U-Boot size
from 0x6.0000 to 0x8.0000, giving enough space for the next time.

This also changes the environment location and potentially the
MTD partitioning, but I see no better fix for now. Especially since
this board does not have an active maintainer.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-04-26 07:35:38 +02:00
Stefan Roese
e297df3468 arm: kirkwood: openrd: Remove superfluous CONFIG_ENV_ADDR
Remove the superfluous CONFIG_ENV_ADDR definition. Its not needed
as CONFIG_ENV_OFFSET is also set to the same value.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-04-26 07:35:38 +02:00
Igor Opaniuk
0d3912fcd4 colibri_imx6: use UUID for rootfs
1. Replace usage of "/dev/mmcblk*p*" with a proper UUID of rootfs
partition. This fixes the issue, when MMC controllers are probed in
a different order in U-boot and Linux kernel.
2. Fix legacy USB command (both sdboot and usbboot can be used now).

Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25 19:21:40 +02:00
Pierre-Jean Texier
0710726d04 warp7: Switch to DM Serial
This commit switches to DM SERIAL for warp7 and warp7_bl33 defconfigs.

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-04-25 19:20:32 +02:00
Parthiban Nallathambi
d8d33b6d4d imx: Add variscite DART-6UL Evaluation Kit
Port for the DART-6UL Evaluation Kit SBC. Based on the variscite
DART-6UL iMX6ULL SoM.

CPU:   Freescale i.MX6ULL rev1.1 900 MHz (running at 396 MHz)
CPU:   Commercial temperature grade (0C to 95C) at 43C
Reset cause: POR
Model: Variscite DART-6UL Evaluation Kit
Board: Variscite DART-6UL Evaluation Kit
DRAM:  512 MiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
In:    serial@02020000
Out:   serial@02020000
Err:   serial@02020000
Net:   FEC0

Working:
 - Eth0
 - i2c
 - MMC/SD
 - eMMC
 - USB host
 - UART 1

Note: LCDIF porting needs DM_VIDEO
https://lists.denx.de/pipermail/u-boot/2019-April/365506.html

Signed-off-by: Parthiban Nallathambi <parthitce@gmail.com>
2019-04-25 19:16:24 +02:00
Peng Fan
3b9ac54150 imx: 8qxp_mek: fix fdt_file and console
Fix fdt_file and console to boot upstream Linux Kernel.

Upstream linux use imx8qxp-mek.dtb, and pass lpuart32 to earlycon
will not work for i.MX8QXP, only need to pass earlycon,
check drivers/tty/serial/earlycon.c,
" /* Just 'earlycon' is a valid param for devicetree and ACPI SPCR. */ "

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-04-25 19:16:24 +02:00
Pierre-Jean Texier
d776b07dc7 warp7: Fix dfu_alt_info setting after DM conversion
After DM conversion, U-Boot is larger than 512 KiB, so we need to increase
the "size" of the dfu_alt_info setting.

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Acked-by: Joris Offouga <offougajoris@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-04-25 19:16:24 +02:00
Joris Offouga
ef679d6ef5 pico-imx7d: Increase u-boot size for dfu request
After DM conversion, the size of U-Boot binary to increase.
Previous size is 480K after DM Conversion the new size is 557K
So it's necessary to increase the dfu request for store u-boot-dtb.img in eMMC.

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
2019-04-25 19:16:24 +02:00
Marcel Ziswiler
5d67b73c1a colibri-imx6ull: migrate fec to using driver model
Migrate Ethernet FEC to using driver model.
Drop PHY_MICREL_KSZ90X1 which slipped in from Apalis iMX6.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25 17:03:25 +02:00
Marcel Ziswiler
535800d33f colibri-imx6ull: migrate mmc to using driver model
Migrate MMC to using driver model.
Migrate USDHC to using pinctrl.
While at it also add GPIO1_IO03__OSC32K_32K_OUT pin muxing.
While at it also update copyright period.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25 17:03:25 +02:00
Stefan Agner
ce30382b49 apalis/colibri_imx6/imx6ull: make sure loadaddr does not collide
Currently $loadaddr and $fdt_addr_r point to the same address. This
might be not ideal for some distro boot scripts which make use of
$loadaddr after loading the device tree.

Make sure the two variables point to two different addresses. Moving
$loadaddr is not entirly trivial since it is defined in mx6_common.h.
Move $fdt_addr_r and $ramdisk_addr_r by 1MiB, which should be enough
for scripts.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-25 17:03:25 +02:00
Peng Fan
0d331c035a imx: support i.MX8QM MEK board
Add i.MX8QM MEK board support.
Included a basic dts, enabled SPL FIT

Boot log as below:
U-Boot SPL 2019.01-rc1-00029-gf002213219 (Dec 24 2018 - 10:28:30 +0800)
Normal Boot
Trying to boot from MMC2_2

U-Boot 2019.01-rc1-00029-gf002213219 (Dec 24 2018 - 10:28:30 +0800)

CPU:   NXP i.MX8QM RevB A53 at 142933 MHz

Model: Freescale i.MX8QM MEK
Board: iMX8QM MEK
Build: SCFW 9330215b
Boot:  SD1
DRAM:  6 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial@5a060000
Out:   serial@5a060000
Err:   serial@5a060000
Net:
Error: ethernet@5b040000 address not set.
eth-1: ethernet@5b040000
Hit any key to stop autoboot:  0

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-25 17:03:25 +02:00
Peng Fan
7246d57659 dt-bindings: clock: dt-bindings: pinctrl: add i.MX8QM clocks definition
Add i.MX8QM clocks definition

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-25 17:03:25 +02:00
Peng Fan
4662c1b6e0 dt-bindings: pinctrl: add i.MX8QM pads definition
Add i.MX8QM pads definition

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-25 17:03:25 +02:00
Lukasz Majewski
400b972a7e Convert CONFIG_USB_EHCI_MX5 to Kconfig
This converts the following to Kconfig:
   CONFIG_USB_EHCI_MX5

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25 17:03:25 +02:00
Lukasz Majewski
52b239ccd1 ARM: config: Remove not needed CONFIG_MXC_USB_PORT define
After i.MX5's EHCI conversion to DM, the CONFIG_MXC_USB_PORT is not needed
anymore and should be removed.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25 17:03:25 +02:00
Lukasz Majewski
ddba5e5961 ARM: kp_imx53: config: Do not use ${boardtype} to setup update wic file
After unification of the rootfs for both HSC and DDC devices, only one,
common wic file is necessary - without the distinction of specific board.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25 17:03:25 +02:00
Lukasz Majewski
63984abc1d ARM: Remove non DM/DTS esdhc3 code from HSC|DDC board related files
After switching to DM/DTS support of esdhc3 - the code in this patch
can be removed.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25 17:03:25 +02:00
Lukasz Majewski
e4b9f5244d ARM: defconfig: Move CONFIG_FSL_ESDHC to Kconfig
The CONFIG_FSL_ESDHC is now enabled and defined in Kconfig, not in
include/configs/kp_imx53.h

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-25 17:03:25 +02:00
Adam Ford
c7d00f63d1 ARM: omap3_logic: Enable UUID
Instead of hardcoding the mmcroot to /dev/mmcblkX, use the UUID
method.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-04-25 17:03:25 +02:00
Adam Ford
fd1a2d7e77 ARM: imx6q_logic: Allow optional arguments to cmd line
This adds an extra, optional environmental variable called
'optargs' which if enabled allow additional parameters to be
passed to the kernel (ie, quiet, cma=128M, etc.)
Each script that setups the bootargs will just append this.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-04-25 17:03:25 +02:00
Peng Fan
fe258048a4 imx8: mek: move HUSH_PARSER to defconfig
Move HUSH_PARSER to defconfig, otherwise meet
"
=> run netboot
Booting from net ...
Unknown command 'if' - try 'help'
Unknown command 'then' - try 'help'
Unknown command 'else' - try 'help'
Unknown command 'fi' - try 'help'
Unknown command '0x80280000' - try 'help'
Unknown command 'if' - try 'help'
Unknown command 'then' - try 'help'
Unknown command 'then' - try 'help'
Unknown command 'else' - try 'help'
Unknown command 'fi' - try 'help'
Unknown command 'else' - try 'help'
Unknown command 'fi' - try 'help'
"

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-25 17:03:25 +02:00
Simon Goldschmidt
4aab2329b2 arm: socfpga: clean up board config files
Remove outdated defines (not used any more, outdated due to DM
conversion) from various socfpga files in include/config.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Acked-by: Marek Vasut <marex@denx.de>
Series-version: 3
Series-changes: 2
- added (this) patch with further cleanups to the socfpga board config
  files
2019-04-25 00:00:49 +02:00
Simon Goldschmidt
faea9e7a78 arm: socfpga: remove CONFIG_SYS_BOOTMAPSZ
socfpga_common.h defines CONFIG_SYS_BOOTMAPSZ to 64 MiB.

Since having this define overrides the 'bootm_size' env variable for
the whole socfpga platform, let's remove this define from socfpga_common.h
and instead rely on the 'bootm_size' env variable (which is initialized
to 160 MiB in the same file's default env). This gives users the
chance to override it in their own environment.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Acked-by: Marek Vasut <marex@denx.de>
Series-to: Marek Vasut <marex@denx.de>
Series-to: u-boot@lists.denx.de
Cover-letter:
arm: socfpga: clean up socfpga_common.h
This series cleans up the include/configs/socfpga_common.h file a bit.

It removes some defines that are used nowhere and cleans up some
leftovers after various subsystems have been converted to use DM.
END
2019-04-25 00:00:49 +02:00
Simon Goldschmidt
71f574df9a arm: socfpga: clean up socfpga_common.h
Remove outdated macros and comments (not used any more, outdated due to
DM conversion) from socfpga_common.h.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Series-changes: 3
- changed commit message: s/defines/macros and comments/

Series-changes: 2
- remove even more outdated things
2019-04-25 00:00:49 +02:00
Simon Goldschmidt
0b7eb4337d arm: socfpga: move vining_fpga to DM_I2C
All socfpga boards except for vining_fpga use DM_I2C. Enable
DM_I2C for this board and set the EEPROM defines via Kconfig
(enabling CONFIG_I2C_EEPROM from MISC).

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Series-changes: 2
- added (this) patch to move socfpga_vining to DM_I2C
2019-04-25 00:00:49 +02:00
Simon Goldschmidt
4399e48deb arm: socfpga: put initial U-Boot stack into DDR
If SPL post-reloc stage puts the stack into DDR, U-Boot should be able to
do that, too.

The reason to do so is that this way, U-Boot initial stack can be larger
than SPL initial stack. In situations where we want to save the SPL
in SRAM for next boot without reloading, this prevents overwriting the
SPL DTB in SRAM if U-Boot stack usage gets too high.

To achieve this, the malloc definition for a10 is moved up and sligthly
changed to ensure CONFIG_SYS_INIT_RAM_SIZE is the remaining available size.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Acked-by: Marek Vasut <marex@denx.de>
2019-04-25 00:00:49 +02:00
Simon Goldschmidt
798baf7ca3 arm: socfpga: fix comment about SPL memory layout
The comment about SPL memory layout for socfpga gen5 is outdated: the
initial malloc memory is now at the end of the SRAM, gd is below it
(see board_init_f_alloc_reserve).

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Acked-by: Marek Vasut <marex@denx.de>
2019-04-25 00:00:49 +02:00
Tom Rini
7d99406742 Various minor sandbox iumprovements
Fixes for tracing with sandbox
 Refactoring for boot_get_fdt()
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAlzAfvkACgkQfxc6PpAI
 reYu9AgAjaFmydXjE8DxkSB3rR7DHZFTs1erVKAAL2v+Tdf7LDmz+j6u1M3v55WY
 6r54f/gZ1UX5TEmQgEAKLa7QvvRO/lNvSGQnLHhZhv2IVWo7uWCKAUPdQ6XVZnUK
 zO5v+ucs9Ne4HxQJHMC509HUIIBbydiRvUm8W0SeBZy4kEyJDuub4L+rpARkXNks
 IZfKuY+VS4FK73D4M9PIhoXSubZgVS4AEcapakU1DvEz0kjsN4wr4idGrp3lutPC
 455imz83JBq2+mx1oxclOGedkIDzTCq+nWQAwSftMehrJpGrp7RLNo0v4QZZUf4V
 LIXRqObIYse9yQLkYPpeBdePMc8/tQ==
 =0NJ2
 -----END PGP SIGNATURE-----

Merge tag 'pull-24apr19' of git://git.denx.de/u-boot-dm

Various minor sandbox iumprovements
Fixes for tracing with sandbox
Refactoring for boot_get_fdt()
2019-04-24 12:27:29 -04:00
Tom Rini
180e38ad2d Pull request for UEFI sub-system for v2019.07-rc1 (3)
This patch series reworks the implementation of the `bootefi` command to
 remove code duplication by using the LoadImage() boot service to load
 binaries.
 
 Missing short texts for UEFI protocols are added for display by the
 `efidebug dh` command.
 
 Missing parameter checks for AllocatePages() and CreateDeviceNode() are
 implemented.
 
 The constants for protocol GUIDs are changed to match the names in the UEFI
 specification.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAly/PhwACgkQxIHbvCwF
 GsRlbA/+JeegsUbV0fYFvdTi4JNPRlKqkzwyo2DoWN76M2MPb+l6d4quxhOdAOaf
 3MpnCHb2z0567b7Ma5+KmAFYEBNJZrxAHthmtRnYhAbJMpE1ei6HzwJ29p+IYQKB
 usc6eOH7ybb99v0KtxLRr1CMpvxK6zud5Zxcyym5nzoAaNP4AplaQDUM1mfYOHox
 sRbEuoNpPkn50ejUtldb0Oh63vJ/bBBLojwQyGnGtBcRDf5bFehHzw5spD0oHPJv
 7E1kze2679kOEsjPa39rFhh/8YaUd+giJW137V2cyFeEyw6ydNKXuWo9Zg0ahLOy
 e+ddRjDCbi0edHbOjL6hdNTgGzdcKwy9bHqYJEacP+OLczmzimNQaALCDUzXcH1C
 lGLHrhbMpV+Do4mFIFdIqPyW+rfRDsz9Sp84Y02M6TBzCK3XPmPXDRVpiTcWmfbb
 ixD4HSQjvPDcmm98iJQIZrfcasnWbBInITqcGDDTIRg0snrYUsIoUNmQPpBDsuwD
 O1hPV8iOpFA/a/8GLJpIgta34YIPZzjlaU38c5+qV7Tsx0ODsdpTVx8JCWeJPeK+
 uhOXTWMlokgH//2ypHzIS9cUEBkoA6I9r4/fWpIjZe3iuxtV8ct2P5dHYcmrRFjY
 lF1WpX3gNeWCgPbGa3Yg/crtpVW+M6hDEgknOPqTAOTjx/g7jpg=
 =caQ+
 -----END PGP SIGNATURE-----

Merge tag 'efi-2019-07-rc1-3' of git://git.denx.de/u-boot-efi

Pull request for UEFI sub-system for v2019.07-rc1 (3)

This patch series reworks the implementation of the `bootefi` command to
remove code duplication by using the LoadImage() boot service to load
binaries.

Missing short texts for UEFI protocols are added for display by the
`efidebug dh` command.

Missing parameter checks for AllocatePages() and CreateDeviceNode() are
implemented.

The constants for protocol GUIDs are changed to match the names in the UEFI
specification.
2019-04-24 12:26:58 -04:00
Tom Rini
c2bb9c5b9e STM32 MCUs update:
_ DT rework and alignment with DT kernel v4.20
 _ mmc: arm_pl180_mmci: Synchronize compatible with kernel v4.20
 _ mmc: stm32_sdmmc2: Synchronize properties with kernel v4.20
 _ configs: update for F746/769 boards
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJcvxeXAAoJEMrHeC97M/+mkpgP/0Xi+pN81lXGEELdVARyu3o9
 g45Ap+xgARgMwtnwtDmx/7tbawieG7F7Gq/AcY+SOod4qIUfb+1LZ/7UMikzXfbG
 VsSFm1YtxTiHIldPAs+i5MU0OO8TphHpqEtI7kj6eAa3MwYYnhd4DTqI/qahexeU
 3FXnUZg6XhURj1Hp/k4lL+8aoEgQKrjPpSq6oKtbF2rUStwyWbZ2PDYbI19RCU6I
 So58wSQYt0W5CP/dbUDydKorjLirHEvj7ppiGMjwaFjSdipOblrinjLSJ2fVPosF
 EK5lG3AOdf4telYafuq2Ur6EXdGOP1HHdsRhUYBCbZchzGLbH2sGdAs2xHUEsxzV
 80+uE5grX46yAQAj2V8ogpIrP6E4PA4pwEZctsS+4tgUhz9NO7kxFooGmNUk5BkY
 ggtXRlYlmXEz+epoXL7Hr5XkHOObkPk5W/R8JiZqRNv4y3NovYbjqAwYYhPCG60k
 jzwT3BdZJDN28gBU57d60VPEhPQHzpoXc6v3rJ08uFhFms03iz7pj9gCsreF48A9
 jQPZ2nemFt4m4LBsKtihLhvb6t6EllOBkCvbYCD6zgebcjUOscJTq3/TnHrMiNBh
 6wUorR09Bn7iMqhs/rPzUUmwDSN9O78P6uBr/D1E8zA9t/mCPHJHVbUHzrB96UGI
 LA7QA1pWbuYtoVSYa09W
 =0eSL
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-mcu-20190423' of https://github.com/pchotard/u-boot

STM32 MCUs update:
- DT rework and alignment with DT kernel v4.20
- mmc: arm_pl180_mmci: Synchronize compatible with kernel v4.20
- mmc: stm32_sdmmc2: Synchronize properties with kernel v4.20
- configs: update for F746/769 boards
2019-04-24 12:26:39 -04:00
Tom Rini
ceb6ddbc73 - Add support for Amlogic p200 & p201 Reference Designs
- Add Amlogic SoC information display
 - Add support for the Libretech-AC AML-S805X-AC board
 - Add Amlogic AXG reset compatible
 - Add I2C support for Amlogic AXG
 - Fix AXG PIN and BANK pinctrl definitions
 - Fix regmap_read_poll_timeout warning about sandbox_timer_add_offset
 - Add initial support for Amlogic G12A SoC and U200 board
 - Enable PHY_REALTEK for selected boards
 - Fix Khadas VIM2 README
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJcvtmpAAoJEHfc29rIyEnRc78P/0vN7zuxfSganTctZJGyrika
 9i3aIwr03KaFJJKg2FpnjMvdoYfjbuQoJmCdtgyO5Gzw/E5m3b8zbOwxoXW0r8Mg
 56fTSh8my8XHxnrc+Ryv+qwnf8SRIDv7apNqk6vpmnq3OC6di/Z/BBi7jT/ptNm+
 fT/VvQDZkPl5Em3kO1899dpZ7mk5WBwrBeD3R8hrrHtpF45zlRXKPIA/rlcT01DD
 w1gKL7n8NNuV+PHB7fh+xYYW7XkZpINqg6RbEi4w/DpM9Piys4XlB8+W361OkU3O
 Mk0u4omb6ahVIzV7AT4/Xz7B6edO/JpuCkLF0CCIzWo6TBT4Dpkz2h0wVaUCuZBC
 /mykRIgYmFCtdFuUuklf12xKA2VzNfEqk+mzyohDwTxdpWnKZOyX+OfR6Y2PKL8Y
 qSSDYkgucf16SIDBXu8/uVI0RCLtCfza68/Py63Hu9tzFWrG3tC94j3xmXAt+gBA
 Rg25xQ+KfX6oEGbHpViBJDLDWZDzqRPlkAdp3mb08Zpq9cynQSfM5dyS02YnEod7
 80uyva2Bq8S5a2NQYtLJRim54N2rM4srgFFFS0Qw4Feqv7KRkbZl37mTraOLKFo+
 h8t2EQnlaiIzWEKwXmgd7eXS3wV3lsVDn1q/UzBdqkPgp4HQcBsUONh5dxrD5Bvq
 bm6hYo2+hqt583THUltr
 =Qb3V
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20190423' of git://git.denx.de/u-boot-amlogic

- Add support for Amlogic p200 & p201 Reference Designs
- Add Amlogic SoC information display
- Add support for the Libretech-AC AML-S805X-AC board
- Add Amlogic AXG reset compatible
- Add I2C support for Amlogic AXG
- Fix AXG PIN and BANK pinctrl definitions
- Fix regmap_read_poll_timeout warning about sandbox_timer_add_offset
- Add initial support for Amlogic G12A SoC and U200 board
- Enable PHY_REALTEK for selected boards
- Fix Khadas VIM2 README
2019-04-24 12:26:25 -04:00
Eugeniu Rosca
829ceb2821 image: android: allow booting lz4-compressed kernels
According to Android image format [1], kernel image resides at 1 page
offset from the boot image address. Grab the magic number from there
and allow U-Boot to handle LZ4-compressed KNL binaries instead of
hardcoding compression type to IH_COMP_NONE. Other compression types,
if needed, can be added later.

Tested on H3ULCB-KF using the image detailed in [2].

[1] Excerpt from include/android_image.h
    +-----------------+
    | boot header     | 1 page
    +-----------------+
    | kernel          | n pages
    +-----------------+
    | ramdisk         | m pages
    +-----------------+
    | second stage    | o pages
    +-----------------+

[2] => iminfo 4c000000
    ## Checking Image at 4c000000 ...
    Android image found
    kernel size:      85b9d1
    kernel address:   48080000
    ramdisk size:     54ddbc
    ramdisk addrress: 4a180000
    second size:      0
    second address:   48000800
    tags address:     48000100
    page size:        800
    os_version:       1200012a (ver: 0.9.0, level: 2018.10)
    name:
    cmdline:          buildvariant=userdebug

Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
2019-04-24 07:27:32 -04:00
Ramon Fried
8781d04f42 pci: pci.h: add missing maskbit
PCI_MSI_FLAGS_MASKBIT was missing from include file,
add it.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-23 20:26:43 -06:00
Thierry Reding
d81d96901e fdtdec: Use fdt_setprop_u32() for fdtdec_set_phandle()
The fdt_setprop_u32() function does everything that we need, so we
really only use the function as a convenience wrapper, in which case it
can simply be a static inline function.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-23 20:26:43 -06:00
Stefan Roese
f2100f6f77 dm: core: Change platform specific translation-offset handling
Testing has shown that the current DM implementation of a platform /
board specific translation offset, as its needed for the SPL on MVEBU
platforms is buggy. The translation offset is confingured too late,
after the driver bind functions are run. This may result in incorrect
address translations. With the current implementation its not possible
to configure the offset earlier, as the DM code has not run at all.

This patch now removed the set_/get_translation_offset() calls and
moves the translation offset into the GD variable translation_offset.
This variable will get used when CONFIG_TRANSLATION_OFFSET is enabled.
This option is enabled only for MVEBU on ARM32 platforms, where its
currenty needed and configured in the SPL.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Pierre Bourdon <delroth@gmail.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heiko Schocher <hs@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Tested-by: Pierre Bourdon <delroth@gmail.com>
Tested-by: Baruch Siach <baruch@tkos.co.il>
2019-04-23 20:26:43 -06:00
Simon Glass
569cec5e84 sandbox: Enable the 'trace' command when tracing is used
Enable this by default so that tracing can be inspected if enabled. This
cannot rely on the 'imply' in lib/Kconfig since this method of enabling
tracing relates on an environment variable (FTRACE) and does not use
Kconfig.

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-04-23 20:26:43 -06:00
Simon Glass
ca49b2c6e2 div64: Use kernel types
These functions still use uint32_t and uint64_t but checkpatch now
requests that the kernel types be used instead. Update them as well as a
few resulting checkpatch errors.

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-04-23 20:26:43 -06:00
Simon Glass
315f60d741 initcall: Drop use of header files
This file should not include header files. They have already been included
by the time initcall.h is included. Also, document how to enable debugging
in this file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-04-23 20:26:43 -06:00
Simon Glass
b82de17eb2 sandbox: Increase the early-trace-buffer size
This buffer is too small now that sandbox has grown in size. Increase it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-04-23 20:26:43 -06:00
Simon Glass
001d1885f0 sandbox: Improve debugging in initcall_run_list()
At present if one of the initcalls fails on sandbox the address printing
is not help, e.g.:

  initcall sequence 0000557678967c80 failed at call 00005576709dfe1f (err=-96)

This is because U-Boot gets relocated high into memory and the relocation
offset (gd->reloc_off) does not work correctly for sandbox.

Add support for finding the base address of the text region (at least on
Linux) and use that to set the relocation offset. This makes the output
better:

  initcall sequence 0000560775957c80 failed at call 0000000000048134 (err=-96)

Then you use can use grep to see which init call failed, e.g.:

   $ grep 0000000000048134 u-boot.map
   stdio_add_devices

Of course another option is to run it with a debugger such as gdb:

   $ gdb u-boot
   ...
   (gdb) br initcall.h:41
   Breakpoint 1 at 0x4db9d: initcall.h:41. (2 locations)

Note that two locations are reported, since this function is used in both
board_init_f() and board_init_r().

   (gdb) r
   Starting program: /tmp/b/sandbox/u-boot
   [Thread debugging using libthread_db enabled]
   Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".

   U-Boot 2018.09-00264-ge0c2ba9814-dirty (Sep 22 2018 - 12:21:46 -0600)

   DRAM:  128 MiB
   MMC:

Breakpoint 1, initcall_run_list (init_sequence=0x5555559619e0 <init_sequence_f>)
    at /scratch/sglass/cosarm/src/third_party/u-boot/files/include/initcall.h:41
41				printf("initcall sequence %p failed at call %p (err=%d)\n",
   (gdb) print *init_fnc_ptr
   $1 = (const init_fnc_t) 0x55555559c114 <stdio_add_devices>
   (gdb)

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-04-23 20:26:43 -06:00
Andreas Dannenberg
4c6be01c27 malloc: Fix memalign not honoring alignment prior to full malloc init
When using memalign() in a scenario where U-Boot is configured for full
malloc support with simple malloc not explicitly enabled and before the
full malloc support is initialized, a memory block is being allocated
and returned without the alignment parameter getting honored.

Fix this issue by replacing the existing memalign pre-full malloc init
logic with a call to memalign_simple() this way ensuring proper alignment
of the returned memory block.

Fixes: ee038c58d5 ("malloc: Use malloc simple before malloc is fully initialized in memalign()")
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-04-23 17:57:27 -04:00
Fabien Parent
cd52c3253a clk: mediatek: add driver for MT8516
Add clock driver for MediaTek MT8516 SoC.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
[trini: Redo whitespace]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-23 17:57:26 -04:00
Shawn Guo
f5ed7481e7 reset: add polarity field into struct reset_ctl
Some reset controllers support different polarities for reset operation,
so let's add a polarity field into struct reset_ctl.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-04-23 17:57:24 -04:00
Thierry Reding
aec4298ccb pci: Scale MAX_PCI_REGIONS based on CONFIG_NR_DRAM_BANKS
If a platform defines CONFIG_NR_DRAM_BANKS, each DRAM bank will be added
as a PCI region. The number of MAX_PCI_REGIONS therefore needs to scale
with the number of DRAM banks, otherwise we will end up with too little
space in the hose->regions array to store all system memory regions.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-23 17:57:23 -04:00
Patrice Chotard
019ce052c8 configs: stm32f746-disco: update EXTRA_ENV_SETTINGS
Allows to boot linux distribution.

As stm32f746-disco and stm32f769-disco are sharing the same defconfig
file, in case of stm32f769-disco build, "fdtfile=..." must be updated
with the correct stm32f769 DTB file name.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23 15:31:35 +02:00
Patrice Chotard
13ba6d0e6f ARM: dts: stm32: Sync DT with v4.20 kernel for stm32h7
Synchronize stm32h7 device tree with kernel v4.20.
U-boot DT files and pinctrl bindings are updated,
useless nodes are removed and gpio compatible added.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23 15:31:17 +02:00
Patrice Chotard
fe63d3cfb7 ARM: dts: stm32: Sync DT with v4.20 kernel for stm32f7
Synchronize stm32f7 device tree with kernel v4.20.

All pinctrl bindings are updated.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23 15:31:06 +02:00
Patrice Chotard
71dfd5f3f5 ARM: dts: stm32: Sync DT files with v4.20 kernel for stm32f4
Synchronize stm32f7 device tree with kernel v4.20.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23 15:30:57 +02:00
Neil Armstrong
f9e605437e ARM: dts: Import Amlogic G12A u200 DT from Linux 5.1-rc1
Import Linux 5.1-rc1 DT from 9e98c678c2d6 ("Linux 5.1-rc1") for the
meson-g12a-u200 board, the meson-g12a.dtsi and the corresponding bindings.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-04-23 11:19:09 +02:00
Neil Armstrong
d0a9b82b75 regmap: fix regmap_read_poll_timeout warning about sandbox_timer_add_offset
When fixing sandbox test for regmap_read_poll_timeout(), the
sandbox_timer_add_offset was introduced but only defined in sandbox code
thus generating warnings when used out of sandbox :

include/regmap.h:289:2: note: in expansion of macro 'regmap_read_poll_timeout_test'
regmap_read_poll_timeout_test(map, addr, val, cond, sleep_us, \
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/spi/meson_spifc.c:169:8: note: in expansion of macro 'regmap_read_poll_timeout'
ret = regmap_read_poll_timeout(spifc->regmap, REG_SLAVE, data,
        ^~~~~~~~~~~~~~~~~~~~~~~~
drivers/spi/meson_spifc.c: In function 'meson_spifc_txrx':
include/regmap.h:277:4: warning: implicit declaration of function 'sandbox_timer_add_offset' [-Wimplicit-function-declaration]

This fix adds a timer_test_add_offset() only defined in sandbox, and
renames the previous sandbox_timer_add_offset() to it.

Cc: Simon Glass <sjg@chromium.org>
Reported-by: Tom Rini <trini@konsulko.com>
Fixes: df9cf1cc08 ("test: dm: regmap: Fix the long test delay")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-23 11:17:15 +02:00
Heinrich Schuchardt
f12bcc9149 efi_loader: check memory type in AllocatePages()
The UEFI specification prescribes that AllocatePages() checks the memory
type.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23 00:37:28 +02:00
AKASHI Takahiro
6b95b38c41 efi_loader: rework bootmgr/bootefi using load_image API
In the current implementation, bootefi command and EFI boot manager
don't use load_image API, instead, use more primitive and internal
functions. This will introduce duplicated code and potentially
unknown bugs as well as inconsistent behaviours.

With this patch, do_efibootmgr() and do_boot_efi() are completely
overhauled and re-implemented using load_image API.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>

Use efi_root as parent handle for the loaded image.
LoadImage() should be called with BootPolicy = true by the boot manager.
Avoid duplicate free_pool().
Eliminate variable memdp which is not needed after anymore due to
"efi_loader: correctly split device path of loaded image".

Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23 00:37:28 +02:00
Heinrich Schuchardt
dec88e41e0 efi_loader: consistent naming of protocol GUIDs
We should consistently use the same name for protocol GUIDs as defined in
the UEFI specification. Not adhering to this rule has led to duplicate
definitions for the EFI_LOADED_IMAGE_PROTOCOL_GUID.

Adjust misnamed protocol GUIDs.

Adjust the text for the graphics output protocol in the output of the
`efidebug dh` command.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23 00:37:27 +02:00
AKASHI Takahiro
a2a4bc3b09 efi_loader: export root node handle
This is a preparatory patch.
The root node handle will be used as a dummy parent handle when invoking
an EFI image from bootefi/bootmgr command.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>

Rebased.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-23 00:37:27 +02:00
Heinrich Schuchardt
dab8788a8c cmd: add exception command
The 'exception' command allows to test exception handling.

This implementation supports ARM, x86, RISC-V and the following exceptions:
* 'breakpoint' - prefetch abort exception (ARM 32bit only)
* 'unaligned'  - data abort exception (ARM only)
* 'undefined'  - undefined instruction exception

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-22 12:06:39 -04:00
Philippe Reynes
c986aa624b bcm963158: add nand support
Enable the nand support (driver and command)
in the configuration of the board bcm963158.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22 12:06:39 -04:00
Philippe Reynes
f313636845 bcm968580xref: add nand support
Enable the nand support (driver and command)
in the configuration of the board bcm968580xref.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22 12:06:38 -04:00
Philippe Reynes
6bbecba833 bcm968380gerg: add nand support
Enable the nand support (driver and command)
in the configuration of the board bcm96838gerg.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22 11:56:29 -04:00
Philippe Reynes
29c7169b7b compat linux: import completion from linux 4.18
This patch port the file include/linux/completion.h
from linux 4.18 to u-boot. It define the structure
but all the function are stubbed.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22 11:55:58 -04:00
Philippe Reynes
d28c5920cd include: linux: io: define devm_ioremap on board with ioremap
The macro devm_ioremap is only defined for configuration
that doesn't have ioremap. But this macro may also be
defined on configuration with ioremap.
This patch remove the condition for the macro devm_ioremap,
so it's always defined.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22 11:55:58 -04:00
Boris Brezillon
9db29b300f mtd: nand: provide several helpers to do common NAND operations
Linux commit 97d90da8a88 ("mtd: nand: provide several helpers
to do common NAND operations")

This is part of the process of removing direct calls to ->cmdfunc()
outside of the core in order to introduce a better interface to execute
NAND operations.

Here we provide several helpers and make use of them to remove all
direct calls to ->cmdfunc(). This way, we can easily modify those
helpers to make use of the new ->exec_op() interface when available.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
[miquel.raynal@free-electrons.com: rebased and fixed some conflicts]
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[Philippe Reynes: adapt code to u-boot and only keep new function]

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22 11:55:58 -04:00
Marc Gonzalez
5df42b0603 mtd: nand: import nand_hw_control_init()
Linux commit d45bc58dd3b ("mtd: nand: import nand_hw_control_init()")

The code to initialize a struct nand_hw_control is duplicated across
several drivers. Factorize it using an inline function.

Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
[Philippe Reynes: adapt code to u-boot and only keep new function]

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22 11:55:58 -04:00
Brian Norris
892a8682f7 mtd: add get/set of_node/flash_node helpers
Linux commit 28b8b26b308 ("mtd: add get/set of_node/flash_node helpers")

We are going to begin using the mtd->dev.of_node field for MTD device
nodes, so let's add helpers for it. Also, we'll be making some
conversions on spi_nor (and nand_chip eventually) too, so get that ready
with their own helpers.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
[Philippe Reynes: only add function nand_set_flash_node and
nand_get_flash_node because others were already backported]

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22 11:55:58 -04:00
Tom Rini
8a94262435 Second set of u-boot-atmel features and fixes for 2019.07 cycle
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJcvW07AAoJEB6zHgIOrC/Iu4QH/1REDOTrsZPydd2yD/O81vPs
 RiLC8wP2J4UmqtMcNTLyvxlYwrzqoR5J6SYdyBNU/+cLEp/gdzEI+rjsfSV2uRX1
 Qb4Pk2FiI503JVjegxsbJqzASfiEP7rIg3HM5431xbhYH22MW2FH6le6yrtNxjBh
 m1WFjQYX1bpbGb6zue8TgyLIeN1IqWuqnH9kUHixUEan+xrpEhN239LDFjdvGbvC
 BvYyMtDddmMt4YDzNjgX36us993kylGZp6JijR3zgUao7I/JGVZAJrxw8MHDTnVy
 UKv3VI9F5bGLSvzqTVL2MFU6XtJW26v+niGLhGzlUhb3TTKrdKOicm3VF7tO+JU=
 =MamK
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-atmel-2019.07-b' of git://git.denx.de/u-boot-atmel

Second set of u-boot-atmel features and fixes for 2019.07 cycle
2019-04-22 10:28:21 -04:00
Heiko Schocher
d76f093f3c at91: corvus_defconfig: get rid of build warnings
fix CONFIG_OF_EMBED and add CONFIG_DM_USB
build warnings.

Signed-off-by: Heiko Schocher <hs@denx.de>
2019-04-22 10:17:29 +03:00
Tom Rini
6c5f8dd540 Merge branch 'master' of git://git.denx.de/u-boot-usb
- Various fastboot, dwc2/stm32 updates
2019-04-21 19:00:04 -04:00
Tom Rini
b4fde1633e Merge branch 'master' of git://git.denx.de/u-boot-socfpga
- Various stratix10, gen5 updates
2019-04-21 18:59:30 -04:00
Patrick Delaunay
931e9d7aa7 usb: dwc2: add support for STM32MP1
Add compatible "st,stm32mp1-hsotg" and associated driver data to manage
the usb33d-supply and the ST specific register for VBus sensing.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
# Conflicts:
#	drivers/usb/gadget/dwc2_udc_otg.c
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-21 10:26:52 +02:00
Patrice Chotard
763bb106f6 usb: dwc2_udc_otg: Add tx_fifo_sz array support
All TX fifo size can be different, add tx_fifo_sz_array[]
into dwc2_plat_otg_data to be able to set them.

tx_fifo_sz_array[] is 17 Bytes long and can contains max 16
tx fifo size (synopsys IP supports max 16 IN endpoints).
First entry of tx_fifo_sz_array[] is the number of valid
fifo size the array contains.

In case of tx_fifo_sz_array[] doesn't contains the same
number of element than max hardware endpoint, display
a warning message.

Compatibility with board which doesn't use tx_fifo_sz_array[]
(Rockchip rk322x/rk3128/rv1108/rk3288/rk3036) is kept.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-21 10:26:52 +02:00
Patrick Delaunay
2d76160f04 usb: dwc2: Add function for session B check
Add a new function to check the session B validity, to be use to check
cable connection.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-21 10:26:52 +02:00
Patrick Delaunay
0fdd0bc621 usb: dwc2: Add force-b-session-valid support
Handle "force-b-session-valid" property from DT.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-21 10:26:52 +02:00
Alex Kiernan
ad991472e7 configs: Migrate USB_MUSB_DISABLE_BULK_COMBINE_SPLIT to Kconfig
Migrate support for disable MUSB bulk split/combine to Kconfig

Green Travis build:

https://travis-ci.org/akiernan/u-boot/builds/519101867

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2019-04-19 11:31:58 +02:00
Ondrej Jirman
0eabec145f sunxi: Fix build when CONFIG_CMD_PXE or CONFIG_CMD_DHCP are disabled
Fixes a compilation failure with disabled PXE or DHCP command when using
sunxi platform.

Signed-off-by: Ondřej Jirman <megous@megous.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-18 22:17:51 +05:30
Eugen Hristev
f085452d85 board: atmel: add SAMA5D2 ICP board
The SAMA5D2 ICP Board features the SAMA5D27 SoC,
together with QSPI Flash, Wilc3000 wireless device and
EtherCat support.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-04-18 09:43:22 +03:00
Simon Goldschmidt
4b2e32efa4 arm: socfpga: gen5: deassert peripheral reset by default
To keep the current behaviour of taking all peripherals out of reset
before booting the OS before removing that code from socfpga gen5 SPL,
this enables the new behaviour by default for all gen5 boards by adding
the environment variable "socfpga_legacy_reset_compat=1" to the default
environment.

This can be overridden in board config files or by saving an environment
without this variable enabled.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-04-17 22:20:16 +02:00
Tom Rini
36c97c4db7 Merge branch 'master' of git://git.denx.de/u-boot-spi
- drop non-DM code from ti_qspi
- support spi-mem for ti_qspi
2019-04-17 09:21:32 -04:00
Uri Mashiach
ecb76eff56 arm: am57xx: cl-som-am57x: remove board support
U-Boot support for the CL-SOM-AM57x module is no longer required.

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
2019-04-17 09:20:26 -04:00
Tom Rini
4b37f36d68 Merge branch 'master' of git://git.denx.de/u-boot-sunxi
- Convert DM_MMC and DM_SCSI
- A20, R40, H6 Linux dts(i) sync
- CLK, RESET support for sunxi, sun8_emac net drivers
2019-04-17 09:19:45 -04:00
Tom Rini
14b8c420b8 Xilinx/FPGA changes for v2019.07
fpga:
 - Add support for external data in FIT
 - Extend testing for external data case
 - Inform user about a need to run post config on Zynq
 
 arm:
 - Tune zynq command functions
 - Fix internal variable setting
 
 arm64:
 - Add support for zc39dr decoding
 - Disable WDT for zcu100
 - Small changes in reset_reason()
 - Some DT changes (spi)
 - Tune qspi-mini configuration
 - Remove useless eeprom setting
 - Fix two sdhci boot case
 
 spi:
 - Fix tap delay programming
 
 clk:
 - Enable i2c in SPL
 
 net:
 - Fix gem phydev handling
 - Remove phy detection code from gem driver
 
 general:
 - Correct EXT_DTB usage for MULTI_DTB_FIT configuration
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAly262oACgkQykllyylKDCH44gCbBnuxUH6ZF0B7Leuee4te7C59
 LmUAn14/bbtMt17zkMSADCjY9yGWF4au
 =mWrW
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2019.07' of git://git.denx.de/u-boot-microblaze

Xilinx/FPGA changes for v2019.07

fpga:
- Add support for external data in FIT
- Extend testing for external data case
- Inform user about a need to run post config on Zynq

arm:
- Tune zynq command functions
- Fix internal variable setting

arm64:
- Add support for zc39dr decoding
- Disable WDT for zcu100
- Small changes in reset_reason()
- Some DT changes (spi)
- Tune qspi-mini configuration
- Remove useless eeprom setting
- Fix two sdhci boot case

spi:
- Fix tap delay programming

clk:
- Enable i2c in SPL

net:
- Fix gem phydev handling
- Remove phy detection code from gem driver

general:
- Correct EXT_DTB usage for MULTI_DTB_FIT configuration
2019-04-17 09:19:13 -04:00
Vignesh Raghavendra
61ae9782ef spi: ti_qspi: Drop non DM code
Now that all boards using TI QSPI have moved to DM and DT, drop non DM
code completely.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[jagan: update MIGRATION.txt, rebase config_whitelist.txt]
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17 17:43:19 +05:30
Andre Przywara
f8c8669760 sunxi: update SATA driver to always use DM_SCSI
It seems like the Allwinner SATA driver is already quite capable of
using the driver model, so we can force this on all boards and can
remove support for a non-DM_SCSI build.
This removes the warning about boards with SATA ports not being
DM_SCSI compliant.

It also takes the opportunity to move the driver out of the board/sunxi
directory to join its siblings in drivers/ata, and to make it a proper
Kconfig citizen.

The board defconfigs stay untouched.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jagan@openedev.com>
[jagan: select DM_SCSI separately]
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17 14:34:45 +05:30
Michal Simek
cc9f55e241 arm64: zynqmp: Remove eeprom setting
By moving to DM_I2C there is no need to specify any eeprom configuration
because it is read from DT.

Reported-by: Sreeja Vadakattu <sreeja.vadakattu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16 11:52:02 +02:00
Melin Tomas
e8f4f1f5d4 ARM: zynq: fix environment command syntax
Update EXTRA_ENV_SETTINGS and related commands to use 'setenv'
instead of short name 'set' in commands.

E.g. in case command setexpr is enabled the short form does not work
properly as the name becomes ambigous.

Fixes error messages like:

    U-Boot> set
    Unknown command 'set' - try 'help'

Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16 11:51:34 +02:00
Tien Fong Chee
3003c445b3 fpga: Replace char * with const char * for filename
Ensure the string for filename is always constant, otherwise it can be
corrupted by the writing.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16 11:51:33 +02:00
Tom Rini
75ce8c938d Move to DM
-----------
 
 - DM support in sata
 - Toradex Board to DM
 - wandboard to DM
 - tbs2910 to DM
 - GE boards to DM
 - VHybrid boards to DM
 - DM_VIDEO for i.MX
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAly0NhIPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3XiUMALq2W4HPjFlDaVHpaxKIvZMkqAAjF7eE6M9l
 DWivSm/Anm5jeE2UM80FpV7npdkPMcOl2YdcIjg+jMKKP6DI+4N6gEhWvxX9mEoC
 RmR2nxGC/GIc0Blb4HU9V6xMkeR5jSAQ6bxZmX3IrnG6u67BIi4NmkNrT9gdQ+WT
 PkJf2Ai7DN7+epfOzjO0d/LjS3hAVb+nesHuxoVraElwc5sEMAnoD0vIMUrXceZ2
 +V6WiU1i9jeLj3fA8P+4o6wqQpxFLlJiuC0FUNKQH/kWIqX6MGrr9ElseLUV0O+Z
 LL5nqsuTgG/fAol1r71De49fiML2Pfx7ZkAZOJ1NMUOXUKw25ulO/wi0wg8t+l2Z
 2oAQ3S84RUVYX4MFLwxkBCq3uC9hvyCfWF1GmVLV6xSEulS6PnHx0FL6OTY4uB3h
 bmVs/mutwwqYBaaoqGG4sG5L7TVSG/JxNgTVNh3Aqj5a89Fd9us+nBhLhoq6xyVl
 cEf+/gPGQ97JEj9DolAPFIFQJBvL7g==
 =KLsH
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20190415' of git://git.denx.de/u-boot-imx

Move to DM
-----------

- DM support in sata
- Toradex Board to DM
- wandboard to DM
- tbs2910 to DM
- GE boards to DM
- VHybrid boards to DM
- DM_VIDEO for i.MX
2019-04-15 07:31:14 -04:00
Tom Rini
38f94d3539 Pull request for UEFI sub-system for v2019.07-rc1 (2)
In the aarch64 crash dump information about the loaded EFI images is added.
 
 In README.uefi the development target is for the UEFI subsystem is
 described as "Embedded Base Boot Requirements (EBBR) Specification"
 compliance.
 
 Several bug fixes are supplied.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAlyyzHEACgkQxIHbvCwF
 GsS+9Q/9HahVvxHFljI8ymxznml7AlFCrxWwcVo5HhftbGuQIgF3NMXRlsxmsSPM
 Z+Cc3EFni4EWWWe9yDMLqXV4NCd6bnfWYWP4UvbqAKCfeX8jScRyMypPnxZ3rNrg
 oe/8zDT9qXQnEah4sB+AQhar2VRTS1p97wKDObt3mj9c2g5pGL1zdejS/4SfnCd0
 a1BymV7p7fpykDjW8S0GQM56QAkbB9CJ4Q7nlPCDlspqJlQB318lWs46FfUn2Aue
 DNLm0uscrMZtEr/aAdT+r/96GIq4AVkexy7b5MZ0v/NDNAtmIqO1ORUmLSNSDfcM
 /cbtxq53VbeztMzMoYDdU0zNR//N4dL3GbSRKJulksvxeIExCp3dRV7gfTOwWq7J
 Lg/b43WJI1f2vgXDgEPddTO3E3SPjCGQcnCNOcVNNfTkyrtVaCmRYh69lV2BpKKF
 oQCYQyzS8yYLxj16YXixK9seyQYxh/vPYVT78ed5A8B1dmyxSQMnEJjY93jngj1g
 k5DRH9nnx12aeEqkhsWvVdHT0OBNj/+oZlzT3KGDcxhrDeZXAgqxAO1oPG85Wqnx
 kPeadyVD0T5Dd8fpMqF+tToB+GCbvyUVJsVlNqDSC7NslJ3AbxBKNDuEsMJlXgwL
 Yh4/lusg/YXzZ4ACWHgUnckZDVZGNj+58QRgEU+3mZinMjDS38E=
 =QdJl
 -----END PGP SIGNATURE-----

Merge tag 'efi-2019-07-rc1-2' of git://git.denx.de/u-boot-efi

Pull request for UEFI sub-system for v2019.07-rc1 (2)

In the aarch64 crash dump information about the loaded EFI images is added.

In README.uefi the development target is for the UEFI subsystem is
described as "Embedded Base Boot Requirements (EBBR) Specification"
compliance.

Several bug fixes are supplied.
2019-04-15 07:30:25 -04:00
Tom Rini
939803e130 - optional backlight PWM polarity config via polarity cell
- bug fix for ASCII characters > 127
 - ANSI sequence handling extensions (implement clear line,
   reverse video and relative cursor movement commands)
 - preparation for doing character set translations
 - left/right and up/down arrow keys translation to ANSI
   control sequences for cursor movement to fix selection
   with an USB keyboard in bootmenu
 - CONFIG_SYS_WHITE_ON_BLACK font scheme configuration for
   sunxi boards
 -----BEGIN PGP SIGNATURE-----
 
 iGwEABECACwWIQSC4hxrSoIUVfFO0kRM6ATMmsalXAUCXLN1fg4cYWd1c3RAZGVu
 eC5kZQAKCRBM6ATMmsalXJKfAJ4mlkJRm5oXcjjZqVkI+Qm1NdKpPACfUuvrDOgo
 MzubX1rLQS+h8BBlG+s=
 =7pd3
 -----END PGP SIGNATURE-----

Merge tag 'video-for-2019.07-rc1' of git://git.denx.de/u-boot-video

- optional backlight PWM polarity config via polarity cell
- bug fix for ASCII characters > 127
- ANSI sequence handling extensions (implement clear line,
  reverse video and relative cursor movement commands)
- preparation for doing character set translations
- left/right and up/down arrow keys translation to ANSI
  control sequences for cursor movement to fix selection
  with an USB keyboard in bootmenu
- CONFIG_SYS_WHITE_ON_BLACK font scheme configuration for
  sunxi boards
2019-04-15 07:30:07 -04:00
Jagan Teki
a93a55044b arm64: allwinner: sun50i: Sync H6 dts(i) files from Linux
Usually the Linux dts changes were synced in specific tags in Allwinner,
to keep track for whats been synced so-far and plan for future syncs.

But this patch sync sun50i-h6* dts(i) files from Linux w/o any specific
tag since these dts(i) changes are required for new H6 boards support.

Linux commit details about the sun50i-h6* sync:
"arm64: dts: allwinner: h6: move MMC pinctrl to dtsi"
(sha1: 6ba2e45d57afdfd982d12f168edd6a79a65075d8)

Linux commit details about the sun8i-tcon-top.h sync:
"dt-bindings: display: sunxi-drm: Add TCON TOP description"
(sha1: 59a9c39544cd1e5952c2a33028d71aa8180648f8)

Part of the sync initiated by 'Clément Péron'.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-14 22:32:32 +05:30
Andre Przywara
7b64a70a3a sunxi: allow boards to de-select SYS_WHITE_ON_BLACK font scheme
In the sunxi-common.h config header we unconditionally define
CONFIG_SYS_WHITE_ON_BLACK, although it's actually a Kconfig option which
could be individually selected by a user.
Remove this #define from the header and let it default to "y" on sunxi
boards (like we do for other platforms).

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-14 14:18:48 +02:00
Andre Przywara
eabb0725d4 video/console: Implement reverse video ANSI sequence for DM_VIDEO
The video console for DM_VIDEO compliant drivers only understands a very
small number of ANSI sequences. First and foremost it misses the "reverse
video" command, which is used by our own bootmenu command to highlight
the selected entry.

To avoid forcing people to use their imagination when using the
bootmenu, let's just implement the rather simple reverse effect. We need
to store the background colour index for that, so that we can
recalculate both the foreground and background colour pixel values.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[agust: merged BG color escape seq change to fix "ut dm video_ansi" test]
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-14 14:18:47 +02:00
Tom Rini
216800acf1 Merge branch 'master' of git://git.denx.de/u-boot-spi
Conflicts:
	arch/arm/dts/armada-385-amc.dts
	arch/arm/dts/armada-xp-theadorable.dts
	arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-14 00:03:06 -04:00
Gerard Salvatella
671b6a3d78 colibri_vf: fix sdboot for vybrid modules
Currently, Vybrid's sdboot variable tries to load the kernel from /boot
of the root partition (typically second partition when using the sdcard
image). However, since we moved to flash the kernel in a separate UBI
volume, we no longer deploy the kernel/device tree to /boot, hence
sdboot does not work in its current state.

Load the kernel and device tree from the first (typically FAT) partition
as customary on all Toradex modules.

While at it also change from rw to ro as e.g. systemd will re-mount the
root file system rw anyway after checking it.

Signed-off-by: Gerard Salvatella <gerard.salvatella@toradex.com>
Acked-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13 20:30:09 +02:00
Stefan Agner
389d680f9b colibri_vf: disable undefined instruction events in user debug
It turns out that OpenSSL calls undefined instructions to detect
ARM capabilities at runtime (via SIGILL handler). This leads to
stack traces e.g. when logging in using SSH:
  [  877.464442] sshd (613): undefined instruction: pc=76ee2da8
  ...

Disable undefined instruction events since it is used as an
autodetecion mechanism.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13 20:30:09 +02:00
Stefan Agner
c7fcbfc695 colibri_vf: enable user debug by default
Let the kernel print some debug messages when a user program
crashes due to an exception.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13 20:30:09 +02:00
Stefan Agner
304042c1f3 colibri_vf: set fdtfile for distroboot
Set fdtfile to represent the current board. This allows distribution
to load the correct device tree, which in the module case often
deviates from the common fallback ${soc}-${board}${boardver}.dtb...

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13 20:30:09 +02:00
Stefan Agner
06487fd188 colibri_vf: add distroboot support
Add support for distro boot. This is especially helpful for external
devices. There is a global boot command which scans a predefined
list of boot targets:
  run distro_bootcmd

As well as direct boot commands such as:
  run bootcmd_mmc0
  run bootcmd_usb
  run bootcmd_dhcp
  ...

Refer to doc/README.distro fo details.

While at it also re-order boot command macros as well as the
CONFIG_EXTRA_ENV_SETTINGS.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13 20:30:09 +02:00
Marcel Ziswiler
c12e415c87 config: colibri_vf: use macros from linux/sizes.h
Use SZ_X{MK} macros from linux/sizes.h for include/configs/colibri_vf.h.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13 20:30:09 +02:00
Marcel Ziswiler
9f9ecdfffd colibri_vf: migrate fec, esdhc, nfc and usb to driver model
Migrate FEC, ESDHC, NFC and USB to driver model.

While at it also do no longer enable optional I2C clock in board file as
the generic clock code now handles this. Note for space reason and as
it is not required just for booting we do not enable I2C in U-Boot by
default.

While at it also update copyright period.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13 20:30:09 +02:00
Marcel Ziswiler
0a6f625d65 configs: move CONFIG_MXC_OCOTP to Kconfig
While commit 3e020f03e9 ("driver: misc: add MXC_OCOTP Kconfig entry")
introduced a Kconfig entry it did not actually migrate all
configurations to using it.

As CONFIG_MXC_OCOTP was in mx{6/7}_common.h enable it by default on
those architectures. Additionally, also enable it on ARCH_IMX8M and
ARCH_VF610 where all current members enabled it through their legacy
configuration header files.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-13 20:30:09 +02:00
Marcel Ziswiler
214fde9062 configs: colibri_vf: remove obsolete mmc/sd card environment
Remove obsolete MMC/SD card environment configuration dating back to
un-fused samples times.

While at it also remove meanwhile spurious "USB Storage" comment.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13 20:30:09 +02:00
Marcel Ziswiler
20df4b570d configs: move CONFIG_USB_EHCI_VF to Kconfig
Move CONFIG_USB_EHCI_VF to drivers/usb/host/Kconfig and update the one
and only user thereof being colibri_vf.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13 20:30:09 +02:00
Anatolij Gustschin
c609542079 imx6: wandboard: convert to DM_I2C
Allow building with DM_I2C enabled.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13 20:30:09 +02:00
Anatolij Gustschin
ec837c82d7 imx6: wandboard: convert to DM_PMIC
Enable DM_PMIC_PFUZE100 driver and add PMIC description to DTS.
Rework power_init_board() code.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13 20:30:09 +02:00
Anatolij Gustschin
f99cd5a787 imx6: wandboard: convert to DM_VIDEO
Enable DM_VIDEO in defconfig.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13 20:30:09 +02:00
Anatolij Gustschin
68559dd42d imx6: wandboard: convert to DM_USB
Drop CONFIG_USB_MAX_CONTROLLER_COUNT and enable DM_USB
in defconfig.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13 20:30:09 +02:00
Anatolij Gustschin
0b09f7b150 imx6: ge_bx50v3: convert to DM_VIDEO
Enable DM_VIDEO in defconfig.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13 20:30:09 +02:00
Anatolij Gustschin
3eb0801016 imx: move CONFIG_VIDEO_IPUV3 to defconfigs
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13 20:30:09 +02:00
Soeren Moch
01b7e8f6d4 board: tbs2910: Convert mmc to driver model
So we don't need to duplicate settings from the device tree in the board file.

Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13 20:30:09 +02:00
Soeren Moch
186d95380d board: tbs2910: Convert sata to ahci driver model
While at it, also configure 64-bit LBA support.

Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13 20:30:09 +02:00
Soeren Moch
f9b0b8d4ee board: tbs2910: Convert i2c and rtc to driver model
So we don't need to duplicate settings from the device tree in the board file.

Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13 20:30:09 +02:00
Soeren Moch
ab3f5efe02 board: tbs2910: Convert usb to driver model
So we don't need to duplicate settings from the device tree in the board file.

Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13 20:30:09 +02:00
Bhuvanchandra DV
84b2ee3abd colibri_imx6: switch to zimage
Switch to the generic compressed Kernel image type (zImage) instead of
the U-Boot specific uImage format.

While at it also fix device tree naming for MMC DFU.

Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:09 +02:00
Sanchayan Maity
2921582c89 configs: colibri_imx6: Use ext4 file system by default
Use ext4 file system by default.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:09 +02:00
Stefan Agner
e85a536ca4 colibri_imx6: add distroboot support
Add support for distro boot. This is especially helpful for external
devices. There is a global boot command which scans a predefined
list of boot targets:
  run distro_bootcmd

As well as direct boot commands such as:
  run bootcmd_mmc1
  run bootcmd_usb
  run bootcmd_dhcp
  ...

Refer to doc/README.distro fo details.

While at it, remove the CONFIG_DRIVE_TYPES define which has not
been used and was meant to be used for multi device boot support
which is now provided by distroboot.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:09 +02:00
Max Krummenacher
1ebb754b20 colibri_imx6: drop CONFIG_OF_SYSTEM_SETUP
This doesn't do anything anymore, probably never did.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:09 +02:00
Marcel Ziswiler
6eea69bd90 colibri_imx6: migrate i2c to using driver model
Migrate I2C to using driver model.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:09 +02:00
Marcel Ziswiler
70af111f89 colibri_imx6: remove obsolete USB_GADGET_MASS_STORAGE configuration
Remove obsolete USB_GADGET_MASS_STORAGE configuration.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:09 +02:00
Marcel Ziswiler
1874cddeb9 colibri_imx6: move console in env from header file to defconfig
Move console in env from header file to defconfig.

While at it also update copyright year.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:09 +02:00
Marcel Ziswiler
63fe9a0827 apalis_imx6: switch to zimage
Switch to the generic compressed Kernel image type (zImage) instead of
the U-Boot specific uImage format.

While at it also fix device tree naming for MMC DFU.

Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:08 +02:00
Sanchayan Maity
ede25100e1 configs: apalis_imx6: Use ext4 file system by default
Use ext4 file system by default.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:08 +02:00
Max Krummenacher
321be22643 apalis_imx6: use both sd/mmc interfaces for setsdupdate
During porting to 2016.11 the check of a SD (mmc2) interface
was dropped, this was unintended.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:08 +02:00
Marcel Ziswiler
26ee49a777 apalis_imx6: add distroboot support
Add support for distro boot. This is especially helpful for external
devices. There is a global boot command which scans a predefined
list of boot targets:
  run distro_bootcmd

As well as direct boot commands such as:
  run bootcmd_mmc1
  run bootcmd_mmc2
  run bootcmd_usb
  run bootcmd_dhcp
  ...

Refer to doc/README.distro for details.

While at it, remove the CONFIG_DRIVE_TYPES define which has not
been used and was meant to be used for multi device boot support
which is now provided by distroboot.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:08 +02:00
Marcel Ziswiler
16959d75dd apalis_imx6: drop CONFIG_OF_SYSTEM_SETUP
This doesn't do anything anymore, probably never did.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:08 +02:00
Marcel Ziswiler
72b49e2c1e apalis_imx6: migrate mmc and sata to using driver model
Migrate MMC and SATA to using driver model.

While at it also enable SCSI driver model.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:08 +02:00
Marcel Ziswiler
ab92352d22 apalis_imx6: migrate i2c to using driver model
Migrate I2C to using driver model.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:08 +02:00
Marcel Ziswiler
7f789592f0 apalis_imx6: remove obsolete USB_GADGET_MASS_STORAGE configuration
Remove obsolete USB_GADGET_MASS_STORAGE configuration.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-04-13 20:30:08 +02:00
Marcel Ziswiler
3858aac41d apalis_imx6: move console in env from header file to defconfig
Move console in env from header file to defconfig.

While at it also update copyright year and remove spurious comments and
new lines.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:08 +02:00
Ian Ray
d46a18a8cc mx53ppd: fix unsupported set command
Fix the NFS commands which used `set' to instead use `setenv'.

Signed-off-by: Ian Ray <ian.ray@ge.com>
2019-04-13 20:30:08 +02:00
Joonas Aijala
b026c826ad board: ge: bx50v3: Network booting of fitImage with nfs rootfs
New boot command introduced to automate network booting.

Signed-off-by: Joonas Aijala <joonas.aijala@ge.com>
Signed-off-by: Ian Ray <ian.ray@ge.com>
2019-04-13 20:30:08 +02:00
Joonas Aijala
403d3888c6 board: ge: bx50v3: Specific ARP timeout removed
Specific ARP timeout sometimes causes ARP timeout during nfs loading
of the fitImage.

Signed-off-by: Joonas Aijala <joonas.aijala@ge.com>
Signed-off-by: Ian Ray <ian.ray@ge.com>
2019-04-13 20:30:08 +02:00
Ian Ray
31c9afdd92 board: ge: ppd: Enable CONFIG_DM_MMC
Use MMC device model, and remove USDHC pin configuration code since the
pinctrl driver is used.

Signed-off-by: Ian Ray <ian.ray@ge.com>
2019-04-13 20:30:08 +02:00
Ian Ray
efc260a9af board: ge: bx50v3: Enable CONFIG_DM_MMC
Use MMC device model, and remove USDHC pin configuration code since the
pinctrl driver is used.

Signed-off-by: Ian Ray <ian.ray@ge.com>
2019-04-13 20:30:08 +02:00
Lukasz Majewski
b3d28ace14 config: bk4: Update u-boot envs to support NOR memories initial setup
Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-13 20:30:08 +02:00
Lukasz Majewski
32c160ef59 config: bk4: Update u-boot script to support recovery via SD card
Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-13 20:30:08 +02:00
Lukasz Majewski
6f854c6655 config: bk4: Update include/configs/bk4r1.h file
The BK4's config file has changed since its initial posting to main line.
This commit reflects those changes.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-13 20:30:08 +02:00
Lukasz Majewski
8d9174003a config: pcm052: Use SZ_X{MK} from linux/sizes.h for include/configs/pcm052.h
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-04-13 20:30:08 +02:00
Lukasz Majewski
9829b246d6 defconfig: bk4/pcm052: Update bk4r1|pcm052_defconfig to support DM/DT
This commit updates BK4's and PCM052's config files to support as much
as possible device tree and model in u-boot.

Moreover, remove CONFIG_* from pcm052.h (as those are now in
bk4|pcm052_defconfig)

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-13 20:30:08 +02:00
Tom Rini
cf5eebeb18 fdtdec tests and improvements for carve-outs
pinctrl race-condition fix
 various other fixes in sandbox, sound, mkimage, etc.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAlyxBfcACgkQfxc6PpAI
 reYtsgf8DSi0h6bNmoPGA8q/aRTQii2x6TheT+AonvND4Kt5ycyw5Otjn3n7O13G
 ubDvBn3Ix5znRaj6nSip7zO1M59dNB19Qk5i+ad21w3rx2V8HTWcLYMwUmC2DPZU
 qMaOpIeEWYKuCDFRhpw/b6yF1rtq4lMxWTrSlB+ewntmrKV+Ymk0UWYSCfNMmZ8F
 cLSd/wFWoTxysZLT4t/5jbNIPU8XaO0hYH0C9Y/tsK80bCpdjkTMNQuO7/qlgUb9
 E7BCf1HXuMqWTZuqub9hu1y24PYufNSHziK1R+lNqm+yW3MxJGihP5OsCfVoHDgu
 FU+QIKeBo64R3eH1VSrAh8pLp143bg==
 =4/BU
 -----END PGP SIGNATURE-----

Merge tag 'pull-12apr19' of git://git.denx.de/u-boot-dm

fdtdec tests and improvements for carve-outs
pinctrl race-condition fix
various other fixes in sandbox, sound, mkimage, etc.
2019-04-13 08:27:35 -04:00
Tom Rini
0a5228be86 - mt76xx: add USB support, small fixes
- ath79: small fixes, add support for QCA9563 SoC and AP152 reference board
 - mscc: small fixes, add network support for JR2 and ServalT SoCs
 - bmips: small fixes, enable more drivers for ARM specific BCM6858 and BCM63158 SoCs
 - MIPS: fix redundant relocation of initrd images
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiQkHUH+J02LLC9InKPlOlyTyXBgFAlywtKQACgkQKPlOlyTy
 XBgYbBAAlRLhN52f2vv9Hng/tfCAuZk7c9tJ+b/5i36ZoJNozeaiOBgwVl3eeEa9
 v4SeKz4J+9FJLOSZkIPrCvX+HaACQn7Pqw/64h3JE8TEzfU5lgmV4Xk2dcXtkmEL
 L5PTQoNMZDgQaeltLtN29yIW5lVxx0NUN9O0FLY5+R/ptXlCFaAGdgSuXH36boDR
 /cvfLlaZPM/hA7l3wRUjWa17L8MNEon4+cqLkzDyTTihdHOdZA4P1O7ce/XffGQp
 BAiSta4EztB1xs0oTAOEmUJp1v8Ae7yRuFoZaCp+Dgq+0WOTbxDW4J57fTaphES1
 su3yoYjju+M/dUb/sWmOQNjeIchJPYWcpiOl9E8jQ/l2SaBJ6Oxmg7PxC3Ww0X2z
 JdF6mcKeaDH3WYO20FeC6xb9Q9FN2yX4rcW/Yg46TdeJ3T2sj8A19ZCHoeAQRl0I
 68SbAaDJw/K3fTBFPd9VyQQQawPbyhmpdQAOWtixNWBFIBbZpqI4o1DMJKJRoxqd
 Ail++ysLUICB0XXg0rGI+dFusjcu9AAeRODc11dtGa0YBh2Y28JrJ4OuV14GYQhe
 5J8BquRaDADA3iK/+3C6TUSQGhb5pFXTcsdNBC9zBPb/ePeMDfZxBcB2vCOnZDZ1
 m0kR5qnsz4IH8/rCmJ5wmMBh6JuyPoCSdiTVuuU5CuCVGYbmJuE=
 =NrV8
 -----END PGP SIGNATURE-----

Merge tag 'mips-pull-2019-04-12' of git://git.denx.de/u-boot-mips

- mt76xx: add USB support, small fixes
- ath79: small fixes, add support for QCA9563 SoC and AP152 reference board
- mscc: small fixes, add network support for JR2 and ServalT SoCs
- bmips: small fixes, enable more drivers for ARM specific BCM6858 and BCM63158 SoCs
- MIPS: fix redundant relocation of initrd images
2019-04-13 08:27:26 -04:00
Heinrich Schuchardt
7657ae12f3 efi_loader: export efi_install_multiple_protocol_interfaces
Export function efi_install_multiple_protocol_interfaces() so that we can
call it in others parts of the UEFI subsystem.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-12 22:00:42 +02:00
Patrick Wildt
60fd8844af efi: fix memory calculation overflow on 32-bit systems
There are Cubox-i machines out there with nearly 4 GiB of RAM.  The
RAM starts at 0x10000000 with a size of 0xf0000000.  Thus the end
of RAM is at 0x100000000.  This overflows a 32-bit integer, which
should be fine since in the EFI memory code the variables used are
all 64-bit with a fixed size.  Unfortunately EFI_PAGE_MASK, which is
used in the EFI memory code to remove the lower bits, is based on
the EFI_PAGE_SIZE macro which, uses 1UL with a shift.  This means
the resulting mask is UL, which is only 32-bit on ARMv7.  Use ULL to
make sure that even on 32-bit platforms we use a 64-bit long mask.
Without this there will be no memory available in the EFI memory map
and bootefi will fail allocating pages.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 22:00:42 +02:00
Tom Rini
015289580f stm32 patches for v2019.07-rc1
- Add trusted boot with TF-A for stm32mp1
 - stm32mp1 dts files sync'ed with Linux version
 - add STM32MP1 Discovery boards (DK1 and DK2)
 - add STMFX gpio expander driver
 - misc improvement for stm3mp1 supports
 - rename stpmu1 to stpmic1 (official name)
 - stm32_qspi: move to exec_op (spi nor driver for stm32 mpu and mcu)
 - add STM32 FMC2 NAND flash controller driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJcsLHKAAoJEOKyvdngqpN1iwsH/3HtFxWsIcmT8TfHgIi2USKx
 /Rpj5Mdl0Q0584LAxZXkR2m9YvzBU6n2tR/n9wQfRyiazoEps1LXMmYcZVy35mQg
 AjTNV7xWfC1EZFP0+Gvn5PFquMPoZoIeqbDy1Jk91Qr4CHIqqS64DBwlTmQfjLzf
 6vfoyBcheL5Rf/AGM5AaHMjwh1GZs89cBCeVjGVMUAPgbfFUAKBWwi2fqdgEbDD7
 b9owLl2IykLTHOhvfnZi5NeRoA39deuNB0vSfU4WcMcONhekFCfOPi3Hch5aM/os
 xXlAXkTqps8rVfYHvUUmHm/wJhk+HH69wMThAWNFev/3g94MWR5zen5rjIOBVGg=
 =9M63
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20190412' of https://github.com/patrickdelaunay/u-boot

stm32 patches for v2019.07-rc1
- Add trusted boot with TF-A for stm32mp1
- stm32mp1 dts files sync'ed with Linux version
- add STM32MP1 Discovery boards (DK1 and DK2)
- add STMFX gpio expander driver
- misc improvement for stm3mp1 supports
- rename stpmu1 to stpmic1 (official name)
- stm32_qspi: move to exec_op (spi nor driver for stm32 mpu and mcu)
- add STM32 FMC2 NAND flash controller driver
2019-04-12 15:43:19 -04:00
Tom Rini
683754f0aa Merge branch 'master' of git://git.denx.de/u-boot-i2c 2019-04-12 15:43:04 -04:00
Tom Rini
066cc7c6cf Merge git://git.denx.de/u-boot-marvell
- Misc dts files sync'ed with Linux version (Chris)
- Orion watchdog fix (Chris)
- kwbimage changed to also support Marvell bin_hdr binary (Chris)
- Add DM support to enable CONFIG_BLK for sata_mv (Stefan)
- Enable BLK on multiple platforms (Stefan)
- Misc minor fixes to AXP theadorable board (Stefan)
- Correct logic for DM_SCSI + unconverted drivers check (stefan)
- Misc changes to kirkwood to enable DM_USB here (Chris)
- Change ahci_mvebu to enable usage on A38x (Baruch)
- Update the kirkwood entry in git-mailrc (Baruch)
- Misc minor improvements (turris, documentation) (Baruch)
- Enhance sata_mv to support Kirkwood as well (Michael)
- Add wdt command (Michael)
- Add Marvell integrated CPUs (MSYS) support with DB-XC3-24G4XG
  board support (Chris)
2019-04-12 15:42:56 -04:00
Horatiu Vultur
b158e56f34 configs: vcoreiii: Change CONFIG_ENV_SIZE
Shrink the environment size for 3 reasons:

 - reading the environment it is slow, therefore having a smaller env
   improves the speed.
 - usually in the environment there are only few variables, therefore
   the enviromnent is almost empty.
 - because the same image can run on different boards which may have
   different flashes with different page sizes, the CONFIG_ENV_SECT_SIZE
   can't be change, it is set to least common multiple of the page sizes.

Adding this change improves the boot time. Before update for reading the
entire environment it took ~850 msec, after the change it takes ~40 msecs.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-04-12 17:32:51 +02:00
Horatiu Vultur
1141176163 net: mscc: jaguar2: Add ethenet nodes for Jaguar2.
Add ethernet nodes for Jaguar2 SoCs family. There are 3 pcb in this
family: pcb110, pcb111 and pcb112.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-04-12 17:32:51 +02:00
Horatiu Vultur
5e1d417bec net: Add MSCC Jaguar2 network driver.
Add network driver for Microsemi Ethernet switch.
It is present on Jaguar2 SoCs.

Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-04-12 17:32:51 +02:00
Rosy Song
61290fb52c mips: add initial support for qca956x referenced board
QCA9563 is CPU used on AP152 board :

    Clock speed : 750 MHz ,
    Arch :  Mips 74Kc,
    Eth : SGMII interface,
    MIMO config : 3 * 3 450M,
    2 * USB 2.0,

Signed-off-by: Rosy Song <rosysong@rosinson.com>

Changes for v2:
   - coding style cleanup
   - remove ununsed flash chip in defconfig
   - enable automatic icache / dcache size in defconfig

Changes for v3:
   - add detailed information for qca956x in commit message

Changes for v4:
   - remove pre-configured network settings in ap152.h

Changes for v5:
   - coding style cleanup
2019-04-12 17:32:50 +02:00
Patrick Delaunay
31e45a1a9e stpmic1: add NVM update support in fuse command
Add functions to read/update the non volatile memory of STPMIC1
(8 bytes-register at 0xF8 address) and allow access
with fuse command (bank=1, word > 0xF8).

For example:

STM32MP> fuse read 1 0xf8 8
Reading bank 1:

Word 0x000000f8: 000000ee 00000092 000000c0 00000002
Word 0x000000fc: 000000f2 00000080 00000002 00000033

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
db4ff0df65 stpmic1: update register names
Alignment with  STPMIC1 datasheet
  s/MAIN_CONTROL_REG/MAIN_CR/g
  s/MASK_RESET_BUCK/BUCKS_MRST_CR/g
  s/MASK_RESET_LDOS/LDOS_MRST_CR/g
  s/BUCKX_CTRL_REG/BUCKX_MAIN_CR/g
  s/VREF_CTRL_REG/REFDDR_MAIN_CR/g
  s/LDOX_CTRL_REG/LDOX_MAIN_CR/g
  s/USB_CTRL_REG/BST_SW_CR/g
  s/STPMIC1_NVM_USER_STATUS_REG/STPMIC1_NVM_SR/g
  s/STPMIC1_NVM_USER_CONTROL_REG/STPMIC1_NVM_CR/g
and update all the associated defines.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
42f01aacfd power: rename stpmu1 to official name stpmic1
Alignment with kernel driver name & binding
introduced by https://patchwork.kernel.org/cover/10761943/
to use the final marketing name = STPMIC1.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
d46c22b3fd power: stpmu1: rename files to stpmic1
Prepare file modification for kernel alignment and
rename driver to stpmic1.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
a53d9f8f90 stm32mp1: activated some configuration
Add configuration useful for test
- FIT support
- MEMTEST
- DFU
- CACHE
- TIME
- TIMER

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
2cf2b51394 stm32mp1: update memory layout
Update the memory layout to be aligned with other platform and avoid
overlap with 32MB Linux kernel (multiv7 image).
+ Kernel => 32MiB offset = 0xC2000000
            and increase the bootm size to 32MiB
+ FDT => 64MiB offset = 0xc4000000
+ SCRIPT => 65Mib offset = 0xc4100000
+ PXESCRIPT => 66Mib offset = 0xc4200000
+ SPLASHIMAGE => 67Mib offset = 0xc4300000
+ RAMDISK => 68Mib offset = 0xc4400000
             (not limited size)

In sources/boot/u-boot/doc/README.distro

+ kernel_addr_r: A size of 16MB for the kernel is likely adequate.
+ pxefile_addr_r: A size of 1MB for extlinux.conf is more than adequate.
+ fdt_addr_r: A size of 1MB for the FDT/DTB seems reasonable.
+ ramdisk_addr_r: It is recommended that this location be highest in RAM
                  out of fdt_addr_, kernel_addr_r, and ramdisk_addr_r,
                  so that the RAM disk can vary in size and use any
                 available RAM.
+ pxefile_addr_r: A size of 1MB for extlinux.conf is more than adequate.
+ scriptaddr: A size of 1MB for extlinux.conf is more than adequate.

For suggestions on memory locations for ARM systems, you must follow
the guidelines specified in Documentation/arm/Booting
in the Linux kernel tree.

And in sources/linux-stm32mp/Documentation/arm/Booting

The zImage may also be placed in system RAM and called there.  The
kernel should be placed in the first 128MiB of RAM.  It is recommended
that it is loaded above 32MiB in order to avoid the need to relocate
prior to decompression, which will make the boot process slightly
faster.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
842ebb5f40 stm32mp1: update bootcmd
Clearly separate bootcmd for stm32mp1 board
(bootcmd_stm32mp) and preboot management.
That solve issue for fastboot continue command.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00
Patrick Delaunay
abf2678f0f stm32mp1: add trusted boot with TF-A
Add support of trusted boot, using TF-A as first stage bootloader,
The boot sequence is
  BootRom >=> TF-A.stm32 (clock & DDR) >=> U-Boot.stm32

The TF-A monitor provides secure monitor with support of SMC
- proprietary to manage secure devices (BSEC for example)
- PSCI for power

The same device tree is used for STMicroelectronics boards with
basic boot and with trusted boot.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12 16:09:13 +02:00
Tom Rini
9c4b0131d1 ti: keystone2: Move CONFIG_ISW_ENTRY_ADDR to a common place
The ISW_ENTRY_ADDR Kconfig option under mach-omap2 isn't a SoC specific
notion but rather "where is our previous stage loaded in memory?"
option.  Make use of this on ARCH_KEYSTONE rather than SPL_TEXT_BASE for
our HS builds that are not using SPL anyhow.

Cc: Vitaly Andrianov <vitalya@ti.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com?
2019-04-12 08:05:55 -04:00
Faiz Abbas
0229c9330d board: ti: am335x: Add platdata for cpsw in SPL
The SPL image overflows when cpsw dt nodes are added and SPL_OF_CONTROL
is enabled. Use static platdata instead to save space.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-04-12 08:05:54 -04:00
Faiz Abbas
a58d222df9 net: ti: cpsw-common: Isolate getting syscon address from assigning macid
ti_cm_get_macid() is used to get a syscon node from the dt, read the
efuse address and then assign the macid read from the address. Divide
these two steps into separate functions one of which can be called from
ofdata_to_platdata() while the other can be called from _probe(). This
ensures that platdata can be assigned statically in a board file when
OF_CONTROL is not enabled. Also add a macid_sel_compat in private data
to get information about the macid byte placement.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-04-12 08:05:53 -04:00
Faiz Abbas
e50f878c98 net: ti: cpsw: Move cpsw_phy_sel() to _probe()
cpsw_phy_sel() is a configuration step that should not be in
ofdata_to_platdata(). Add phy_sel_compat to the cpsw_platform_data
structure so that it is accessible in _probe. Then move the call of
cpsw_phy_sel() to _probe.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-04-12 08:05:52 -04:00
Faiz Abbas
3c6add986f net: Add priv_pdata to eth_pdata
Add a priv member for eth_pdata for platform specific platform data.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-04-12 08:05:52 -04:00
Lokesh Vutla
826eb74015 firmware: Add support for querying msmc memory
DMSC can use certain amount of msmc memory available in the
system. Also certain part of msmc memory can be marked as L3
cache using board config. But users might not know what size
is being used and the remaining available msmc memory. In order
to fix this TISCI protocol provides a messages that can query
the available msmc memory in the system. Add support for this
message.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-04-12 08:05:50 -04:00
Faiz Abbas
097fd51b7a configs: ti_omap5_common: Add NAND environment settings
Now that NAND is supported on DRA71x include various NAND environment
settings

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-04-12 08:05:50 -04:00
Adam Ford
15b8c75058 davinci: da850evm/omapl138-lcdk: Move BSS to SDRAM because SRAM is full
In order to fully support SPL_OF_CONTROL, we need BSS to be a bit
larger. This patch relocates BSS to SDRAM instead of SRAM which
is similar to how ARMv7 boards (like OMAP2+) do it.

This means two new variables are required:
CONFIG_SPL_BSS_START_ADDR  set to DAVINCI_DDR_EMIF_DATA_BASE
CONFIG_SPL_BSS_MAX_SIZE is set to 0x1080000 which is 1 byte
before the location where U-Boot will load.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-04-12 08:05:49 -04:00
Sjoerd Simons
4512380420 am335x, guardian: Add support for the bosch guardian board
Add support for the Bosch Guardian board.

CPU  : AM335X-GP rev 2.1
Model: Bosch AM335x Guardian
I2C:   ready
DRAM:  256 MiB
NAND:  512 MiB
MMC:   OMAP SD/MMC: 0

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Felix Brack <fb@ltec.ch>
2019-04-12 08:05:48 -04:00
Patrick Delaunay
b0cc1b846f dm: spi: Read default speed and mode values from DT
This patch update the behavior introduced by
commit 96907c0fe5 ("dm: spi: Read default speed and mode values from DT")

In case of DT boot, don't read default speed and mode for SPI from
CONFIG_* but instead read from DT node. This will make sure that boards
with multiple SPI/QSPI controllers can be probed at different
bus frequencies and SPI modes.

Remove also use in boards of the value speed=0 (no more supported)
for ENV in SPI by using CONFIG_ENV_SPI_MAX_HZ=0.

DT values will be always used when available (full DM support of
SPI slave with available DT node) even if speed and mode are requested;
for example in splash screen support (in splash_sf_read_raw)
or in SPL boot (in spl_spi_load_image).
The caller of spi_get_bus_and_cs() no more need to force speed=0.

But the current behavior don't change if the SPI slave is not
present (device with generic driver is created automatically)
or if platdata is used (CONFIG_OF_PLATDATA).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-12 11:54:50 +05:30
Miquel Raynal
a55036b278 mtd: fix mtd_oobavail() incoherent returned value
mtd_oobavail() returns either mtd->oovabail or mtd->oobsize. Both
values are unsigned 32-bit entities, so there is no reason to pretend
returning a signed one.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-12 10:58:21 +05:30
Chris Packham
4db944ab44 arm: mvebu: Add DB-XC3-24G4XG board
The DB-XC3-24G4XG is a switch development board from Marvell. It can
either use and external CPU card such as the db-88f6820-amc or the
internal CPU that is integrated into the switch.

Add support for running U-Boot on the internal CPU and enable the USB,
SPI and NAND peripherals. For now this needs the bin_hdr from the
Marvell U-Boot for this board.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-04-12 07:04:18 +02:00
Michael Walle
f94b5223fb arm: kirkwood: lsxl: enable DM for SATA
Switch from legacy IDE driver to sata_mv driver.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-04-12 07:04:18 +02:00
Baruch Siach
c1d81f6f01 arm: mvebu: turris_omnia: select Kconfig SPI_FLASH_SPANSION
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-04-12 07:04:18 +02:00
Baruch Siach
1c11dcf847 mvebu: drop dangling SPI flash comments and #ifdefs
Following commits abe66b1b5d ("Convert CONFIG_ENV_SPI_* to Kconfig")
and 14453fbfad ("Convert CONFIG_SF_DEFAULT_* to Kconfig") remove
dandling comment lines and empty #ifdef sections.

Cc: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-04-12 07:04:18 +02:00
Thierry Reding
16523ac790 fdtdec: Implement carveout support functions
The fdtdec_get_carveout() and fdtdec_set_carveout() function can be used
to read a carveout from a given node or add a carveout to a given node
using the standard device tree bindings (involving reserved-memory nodes
and the memory-region property).

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-11 20:10:50 -06:00
Thierry Reding
c9222a08b3 fdtdec: Implement fdtdec_add_reserved_memory()
This function can be used to add subnodes in the /reserved-memory node.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-11 20:10:50 -06:00
Thierry Reding
8153d53b93 fdtdec: Implement fdtdec_set_phandle()
This function can be used to set a phandle for a given node.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-11 20:10:50 -06:00
Thierry Reding
4f253ad064 fdtdec: Add fdt_{addr, size}_unpack() helpers
These helpers can be used to unpack variables of type fdt_addr_t and
fdt_size_t into a pair of 32-bit variables. This is useful in cases
where such variables need to be written to properties (such as "reg")
of a device tree node where they need to be split into cells.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-11 20:10:50 -06:00
Thierry Reding
155d0a08fb fdtdec: Add cpu_to_fdt_{addr, size}() macros
These macros are useful for converting the endianness of variables of
type fdt_addr_t and fdt_size_t.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-11 20:10:50 -06:00
Patrick Delaunay
c7fbee540e dm: remove unused function dm_fdt_pre_reloc
The function dm_ofnode_pre_reloc should be used instead
of the function dm_fdt_pre_reloc and avoid duplicated code.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-11 20:10:48 -06:00
Christoph Muellner
174538845b dm: pinctrl: Remove obsolete function pinctrl_decode_pin_config_dm().
This reverts commit 5ff7768892.

As noted in the comment, the function pinctrl_decode_pin_config_dm()
only served as a temporary solution.

Since the function has no users anymore, we can remove it again.

Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-11 20:10:05 -06:00
Vignesh R
91dba55ca6 soc: keystone: Merge into ti specific directory
Merge drivers/soc/keystone/ into drivers/soc/ti/
and convert CONFIG_TI_KEYSTONE_SERDES into Kconfig.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-04-11 20:07:12 -04:00
Vignesh R
ffcc66e8fe dma: ti: add driver to K3 UDMA
The UDMA-P is intended to perform similar (but significantly upgraded) functions
as the packet-oriented DMA used on previous SoC devices. The UDMA-P module
supports the transmission and reception of various packet types.
The UDMA-P also supports acting as both a UTC and UDMA-C for its internal
channels. Channels in the UDMA-P can be configured to be either Packet-Based or
Third-Party channels on a channel by channel basis.

The initial driver supports:
- MEM_TO_MEM (TR mode)
- DEV_TO_MEM (Packet mode)
- MEM_TO_DEV (Packet mode)

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
2019-04-11 20:07:12 -04:00
Grygorii Strashko
17ef3c4c28 soc: ti: k3: add CPPI5 description and helpers
Add TI Communications Port Programming Interface (CPPI) 5
interface description and helpers

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-04-11 20:07:12 -04:00
Grygorii Strashko
432f66fe73 soc: ti: k3: add navss ringacc driver
The Ring Accelerator (RINGACC or RA) provides hardware acceleration to
enable straightforward passing of work between a producer and a consumer.
There is one RINGACC module per NAVSS on TI AM65x SoCs.

The RINGACC converts constant-address read and write accesses to equivalent
read or write accesses to a circular data structure in memory. The RINGACC
eliminates the need for each DMA controller which needs to access ring
elements from having to know the current state of the ring (base address,
current offset). The DMA controller performs a read or write access to a
specific address range (which maps to the source interface on the RINGACC)
and the RINGACC replaces the address for the transaction with a new address
which corresponds to the head or tail element of the ring (head for reads,
tail for writes). Since the RINGACC maintains the state, multiple DMA
controllers or channels are allowed to coherently share the same rings as
applicable. The RINGACC is able to place data which is destined towards
software into cached memory directly.

Supported ring modes:
 - Ring Mode
 - Messaging Mode
 - Credentials Mode
 - Queue Manager Mode

TI-SCI integration:

Texas Instrument's System Control Interface (TI-SCI) Message Protocol now
has control over Ringacc module resources management (RM) and Rings
configuration.

The Ringacc driver manages Rings allocation by itself now and requests
TI-SCI firmware to allocate and configure specific Rings only. It's done
this way because, Linux driver implements two stage Rings allocation and
configuration (allocate ring and configure ring) while TI-SCI Message
Protocol supports only one combined operation (allocate+configure).

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
2019-04-11 20:07:12 -04:00
Grygorii Strashko
fd6b40b1ba firmware: ti_sci: Add support for NAVSS resource management
Texas Instruments' System Control Interface (TI-SCI) Message Protocol
abstracts management of NAVSS resources, like PSI-L pairing and
unpairing, UDMAP tx/rx/flow configuration and Rings.

This patch adds support for requesting and configuring such resources
from TI-SCI firmware.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
2019-04-11 20:07:12 -04:00
Tom Rini
f95fdf237d Merge branch 'master' of git://git.denx.de/u-boot-sh
- Various rmobile fixes
2019-04-11 14:29:22 -04:00
Lukasz Majewski
a40fe217d1 DM: I2C: Introduce 'u-boot, i2c-transaction-bytes' property
The 'u-boot,i2c-transaction-bytes' device tree property provides
information regarding number of bytes transferred by a device in a
single transaction.

This change is necessary to avoid hanging devices after soft reset.
One notable example is communication with MC34708 device:

1. Reset when communicating with MC34708 via I2C.

2. The u-boot (after reboot -f) tries to setup the I2C and then calls
force_idle_bus. In the same time MC34708 still has some data to be sent
(as it transfers data in 24 bits chunks).

3. The force_idle_bus() is not able to make the bus idle as 8 SCL
clocks may be not enough to have the full transmission.

4. We end up with I2C inconsistency with MC34708.

This PMIC device requires 24+ SCL cycles to make finish any pending I2C
transmission.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-11 15:21:33 +02:00
Neil Armstrong
4a327e8329 boards: Amlogic: Add support for Libretech-AC
LibreTech AC is a single board computer manufactured by Libre Technology
with the following specifications:

 - Amlogic S805X ARM Cortex-A53 quad-core SoC @ 1.2GHz
 - ARM Mali 450 GPU
 - 512MiB DDR4 SDRAM
 - 10/100 Ethernet
 - HDMI 2.0 4K/60Hz display
 - 40-pin GPIO header
 - 4 x USB 2.0 Host
 - eMMC, SPI NOR Flash
 - Infrared receiver

The u-boot specific code is the same as the P212 support,
so use the P212 board support code with a distinct defconfig
and config include files.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-04-10 16:50:46 +02:00
Jean-Jacques Hiblot
aaa12157c7 fs: Add a new command to create symbolic links
The command line is:
ln <interface> <dev[:part]> target linkname

Currently symbolic links are supported only in ext4 and only if the option
CMD_EXT4_WRITE is enabled.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-04-09 20:04:03 -04:00
Jean-Jacques Hiblot
5efc0686ee fs: ext4: Add support for the creation of symbolic links
Re-use the functions used to write/create a file, to support creation of a
symbolic link.
The difference with a regular file are small:
- The inode mode is flagged with S_IFLNK instead of S_IFREG
- The ext2_dirent's filetype is FILETYPE_SYMLINK instead of FILETYPE_REG
- Instead of storing the content of a file in allocated blocks, the path
to the target is stored. And if the target's path is short enough, no block
is allocated and the target's path is stored in ext2_inode.b.symlink

As with regulars files, if a file/symlink with the same name exits, it is
unlinked first and then re-created.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Fix ext4 env code]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-09 20:03:30 -04:00
Jean-Jacques Hiblot
b000180b0f fs: ext4: constify the buffer passed to write functions
There is no need to modify the buffer passed to ext4fs_write_file().
The memset() call is not required here and was likely copied from the
equivalent part of the ext4fs_read_file() function where we do need it.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-04-09 15:34:15 -04:00
Stephen Warren
d5aee659f2 fs: ext4: cache extent data
When a file contains extents, U-Boot currently reads extent-related data
for each block in the file, even if that data is located in the same
block each time. This significantly slows down loading of files that use
extents. Implement a very dumb cache to prevent repeatedly reading the
same block. Files with extents now load as fast as files without.

Note: There are many cases where read_allocated_block() is called. This
patch only addresses one of those places; all others still read redundant
data in any case they did before. This is a minimal patch to fix the
load command; other cases aren't fixed.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2019-04-09 15:34:15 -04:00
Marek Vasut
8c56350169 ARM: rmobile: alt: Increase USB power-good delay
Increase the USB power good delay on Alt, this is required with
certain USB sticks, otherwise they might not be detected.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-04-09 18:19:10 +02:00
Marek Vasut
72242e5439 clk: renesas: Synchronize Gen3 tables with Linux 5.0
Synchronize R-Car Gen3 clock tables with Linux 5.0,
commit 1c163f4c7b3f621efff9b28a47abb36f7378d783 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-04-09 18:19:10 +02:00
Marek Vasut
a3c31e98a1 clk: renesas: Synchronize Gen2 tables with Linux 5.0
Synchronize R-Car Gen2 clock tables with Linux 5.0,
commit 1c163f4c7b3f621efff9b28a47abb36f7378d783 .

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-04-09 18:19:10 +02:00
Marek Vasut
95f4bbd581 lib: fdt: Allow LZO and GZIP DT compression in U-Boot
Add required Kconfig symbols, Makefile bits and macro fixes in a
few places to support LZO and DT compression in U-Boot. This can
save a lot of space with multi-DTB fitImages.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2019-04-09 18:19:10 +02:00
Marek Vasut
118f4d4559 lib: fdt: Split fdtdec_setup_memory_banksize()
Split fdtdec_setup_memory_banksize() into fdtdec_setup_memory_banksize_fdt(),
which allows the caller to pass custom blob into the function and the
original fdtdec_setup_memory_banksize(), which uses the gd->fdt_blob. This
is useful when configuring the DRAM properties from a FDT blob fragment
passed in by the firmware.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-09 18:19:09 +02:00
Marek Vasut
3ebe09d09a lib: fdt: Split fdtdec_setup_mem_size_base()
Split fdtdec_setup_mem_size_base() into fdtdec_setup_mem_size_base_fdt(),
which allows the caller to pass custom blob into the function and the
original fdtdec_setup_mem_size_base(), which uses the gd->fdt_blob. This
is useful when configuring the DRAM properties from a FDT blob fragment
passed in by the firmware.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-09 18:19:09 +02:00
Tom Rini
5a451f11c8 First set of u-boot-atmel features and fixes for 2019.07 cycle
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJcrEcDAAoJEB6zHgIOrC/I1dgH/3mHQNW8bqiNCJYcoVQdheHb
 e06TqbWHNlOG/NilYybvdeF+LjeCqhX4PzyL/sdcyBf3D/tK4cVvHpZrQyjb2s6K
 5IZSKJ+cZznmq6Hv7b//d30Azhx8bi8luxs60kkj+PF0xI1EyU3JteUqAs4Ooxd7
 z+HdcRFuAaps6sy0+szB3fTw9HTGrhFvQuHasDGb2uahhpwGzu/P0RchIDksOdzH
 3L4EOvgq8MZCiZ3ZtFWMWzQoCjcKf5Fuux41qar8gG/LrkWRfKG+LfWfZtTiTsjf
 vC9bYWmdKtkSLFj1PWgLBfGxev5zwPUbqI2EP4OlagfNs3os5pVFCYV5NZ6ovdE=
 =kMXf
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-atmel-2019.07-a' of git://git.denx.de/u-boot-atmel

First set of u-boot-atmel features and fixes for 2019.07 cycle
2019-04-09 12:10:40 -04:00
Claudiu Beznea
068d4c0a11 pinctrl: at91: add slewrate support for SAM9X60
Add slew rate support for SAM9X60 pin controller.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2019-04-09 09:28:50 +03:00
Stefan Roese
a71e2f933b arm: at91: Add gardena-gateway-at91sam support
The GARDENA smart Gateway boards are equipped with an Atmel / Microchip
AT91SAM9G25 SoC and with 128 MiB of RAM and 256 MiB of NAND storage.
This patch adds support for this board including SPL support. Therefore
the AT91Boostrap is not needed on this platform any more.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Andreas Bießmann <andreas@biessmann.org>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2019-04-09 09:28:50 +03:00
Stefan Roese
fc89afba11 arm: at91: siemens: Add support to generate combined SPL+U-Boot image
This patch adds the necessary defines to the Siemens AT91SAM based
boards (smartweb, corvus and taurus) to generate the combined binary
image with SPL and main U-Boot image combined (u-boot-with-spl.bin).

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Andreas Bießmann <andreas@biessmann.org>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Tested on the taurus board:
Tested-by: Heiko Schocher <hs@denx.de>
2019-04-09 09:28:50 +03:00
Stefan Roese
7fbd42f5af watchdog: Handle SPL build with watchdog disabled
This patch adds some checks, so that the watchdog can be enabled in main
U-Boot proper but can be disabled in SPL.

This will be used by some AT91SAM based boards, which might enable the
watchdog in the main U-Boot proper and not in SPL. It will be enabled in
SPL by default there, so no need to configure it there. This approach
saves some space in SPL.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Andreas Bießmann <andreas@biessmann.org>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Tested on the taurus board:
Tested-by: Heiko Schocher <hs@denx.de>
2019-04-09 09:28:50 +03:00
Ilko Iliev
d9bd42900c board: pm9g45: Migrate to CONFIG_DM
Migrate the following options to CONFIG_DM:
  CONFIG_DM_GPIO
  CONFIG_DM_MMC
  CONFIG_DM_ETH
  CONFIG_DM_SERIAL
  CONFIG_DM_USB

Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2019-04-09 09:28:50 +03:00
AKASHI Takahiro
d7e0b0109e efi_loader: boottime: export efi_[un]load_image()
Those two functions will be used later to re-implement do_bootefi_exec().

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-07 14:17:06 +02:00
AKASHI Takahiro
bc8fc32855 efi_loader: boottime: add loaded image device path protocol to image handle
To meet UEFI spec v2.7a section 9.2, we should add
EFI_LOADED_IMAGE_DEVICE_PATH_PROTOCOL to image handle,
instead of EFI_DEVICE_PATH_PROTOCOL.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-07 14:17:06 +02:00
AKASHI Takahiro
8458bf648f efi_loader: set image_base and image_size to correct values
Currently, image's image_base points to an address where the image was
temporarily uploaded for further loading. Since efi_loader relocates
the image to final destination, image_base and image_size should reflect
that.

This bug was detected in UEFI SCT, "Loaded Image Protocol Test - test 2,"
which shows that 'Unload' function doesn't fit into a range suggested by
image_base and image_size.

	TestCase/UEFI/EFI/Protocol/LoadedImage/BlackBoxTest/
	LoadedImageBBTestMain.c:1002

Changes in this patch also includes:
* reverts a patch, "efi_loader: save image relocation address
  and size" since newly added fields are no longer needed.
* copy PE headers as well since those information will be needed
  for module loading, in particular, at gurb.
  (This bug was reported by Heinrich.)

Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>

Rebase patch.
Remove unused fields from struct efi_loaded_image_obj.

Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-07 14:17:06 +02:00
Tom Rini
0e62d5b2ab Fixes for 2019.04
- fix bashism for MX8
 	- fix ethernet for MX53
 	- fix docs for i.MX8
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAlynLM8PHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et38/QL/Rc3p1pF6Dr9zKzxA0rcMoBo9MzzTrUP6XrN
 8syDBJNo2u93Msv78xHTQMCcfxRR3bkTYiWPEzWphC4Qk2IZIe2sETxu2BqsmWRI
 qzK5+L7oU3qJYqY8mZTUKPhmNxDu7E6yGXI1cWboWSR+/DMTxrUHZU5gjQyaQ/WN
 Diko1+lyaygZyPv0FzBdx7Vv+agQusGXGu4XbRkOXhrE6ytMv2ZjCzUtMYRIUg8H
 057DtJfwgU+zfimUoeuiltAwywh9UGxmlR4kb6rF5VZWX0Xn/XoVbMR6qRQXaFIz
 PzlNu3FEpOmvBQ5W5xySHS0CzbeTisIopJehZbkCc+XaEr80GplN995rGWGIN5av
 nlYS7rWHyIcVxoQNT61JTfVC1blFu6+tiokINWFI8as0fMrEAU4okzT4oBaGxdun
 CVcZDo9ytxKWLqtpD0MIQW4r4kJ27yWe3s4ot+v/+jb+XwkatX2J6oaiKviFFhuc
 BwniIb9lsi3ESIOaQXjpJ+qAw9gWYA==
 =//jr
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20190405' of git://git.denx.de/u-boot-imx

Fixes for 2019.04

	- fix bashism for MX8
	- fix ethernet for MX53
	- fix docs for i.MX8
2019-04-05 09:09:56 -04:00
Lukasz Majewski
8e2b1f2251 cosmetic: Remove not needed string from kp_imx53.h config
Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-02 13:44:18 +02:00
Lukasz Majewski
f73c09e735 cosmetic: config: Remove empty #ifdefs
After running tools/moveconfig.py it turned out that for various boards
there are an empty #ifdef statements.

Remove them to clean u-boot source code.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-02 13:44:18 +02:00
Tom Rini
da06f9a185 Merge branch 'master' of git://git.denx.de/u-boot-sh
Minor fixes for the Alt board and PHY use on Gen2.
2019-04-01 23:30:00 -04:00
Adam Ford
b7de88cd5c ARM: imx6q_logic: Enable UUID support
With UUID support, the root can now point to UUID.  This makes
swiching between mmc 0 and mmc 1 easier by simplying changing
mmcdev between 0 and 1.  From there, the scripts handle the rest.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-03-31 20:00:57 +02:00
Stefano Babic
66c433ed43 Merge branch 'master' of git://git.denx.de/u-boot
Signed-off-by: Stefano Babic <sbabic@denx.de>
2019-03-31 19:54:10 +02:00
Marek Vasut
0fe668d7d9 ARM: rmobile: rcar-gen2: Activate bootm_size
Commit d245059ff7 ("ARM: rmobile: rcar-gen3: Activate bootm_size")
only fixed the superfluous CONFIG_SYS_BOOTMAPSZ for R-Car Gen3, even
though it listed all affected boards. Apply the same fix to Gen2.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Fixes: d245059ff7 ("ARM: rmobile: rcar-gen3: Activate bootm_size")
Cc: Eugeniu Rosca <erosca@de.adit-jv.com>
2019-03-30 07:48:05 +01:00
Tom Rini
c3aef9339c Merge branch '2019-03-29-master-imports'
- Bugfixes:
  - mmc: correct the HS400 initialization process
  - configs: ti: Move FIT image load address to avoid overwrite
  - lib: time: update module enable MACRO
  - Add mbrugger as RPi board maintainer, correct agraf's email address.
2019-03-29 10:53:28 -04:00
Andrew F. Davis
1abddd933f configs: ti: Move FIT image load address to avoid overwrite
The FIT image is loaded to 0x8700_0000 followed by extracting from that
several large images also into the 0x8x00_0000 range. Large images
can end up overwriting the FIT image as it is being extracted from.
Move the FIT load address clear out to 0x9000_0000, this will require
a board to have at least 256MB of DRAM, if less then more careful
planning will be required for that platform.

Signed-off-by: Andrew F. Davis <afd@ti.com>
2019-03-29 10:53:18 -04:00
Tom Rini
b357ae5ed6 Pull request for UEFI system for v2019.04-rc5-2
This patch series contains a bug fix for a double free in a UEFI unit
 test. The other patches are documentation only (except for the definition
 of two additional constants).
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAlydMVEACgkQxIHbvCwF
 GsQ0KA/+JU1s0Mhu9fWb+LR/sDz7hoLgbPgYQA71+ngwy0ihzIKfrOx7BBfBzzC6
 yaFJznaWGZBskvlEpD7n+6g+RPomcsvla3KUEwIGjstBYkDJ1AHyjNtt3fbEEyqo
 Ub90hOvvB46BKZ4uqkM+qA4GpctONgAeEUVtmYvx1FXAlzXKhltZdt67V3ZzV0ir
 JdQ3UtuNibSTmvTxLRRkCUk6xCBF912NXkwPY5J6tnnRNJmmqE9urdmsmmycNByK
 zTmCG3z80xBE5GoEB9mm/89XKreqCIZ3w8ANk/u6WIGLaa4tjR47k5MxXju2PyVQ
 sLg2j5uyfr9CKeq0HdtD1PLXc4dzp9JX4xuJKNZ+J+kzqid8Foh4Av/D44z3/xAW
 dJ7BqPo+JjJEitbjtqVcAQCFS2a+Sk94TrPmKhiNbMbGo/D1tqC1yMdwAFQebH4l
 46UJCq4lOw1QwjaESpozWKNAZe41QvZn2vLvOxIEiZeIbGHwYVFYoqXaJIf5YEx9
 D9YLBxx27SRAQFB9bqnmHh6a44c+E8MKmbTbQsLY9tX8tCNUEXpSpod88Yaaobny
 pRtBXskdmMyvViivrcawdWmHk95OIQscV61DGJAGD26dYkPli6YKx0At3kBhu0iT
 TZ0SKmWAloXopI8mqL7xlMCBsgl33oNfPOjzGsxoA5ka2m6HapU=
 =UiND
 -----END PGP SIGNATURE-----

Merge tag 'efi-2019-04-rc5-2' of git://git.denx.de/u-boot-efi

Pull request for UEFI system for v2019.04-rc5-2

This patch series contains a bug fix for a double free in a UEFI unit
test. The other patches are documentation only (except for the definition
of two additional constants).
2019-03-29 09:21:30 -04:00
Eugeniy Paltsev
4f5e552d95 ARC: AXS10x: drop NAND support
On AXS10x boards we have non-standard NAND controller
which was never really used a lot as there're other much more
convenient [as they are standard & removable] persistent media
like SD-card and USB mass storage.

Moreover after recent changes we face with some NAND controller
runtime issues. So instead of keeping support of yet another
non-standard peripheral we're dropping its support for good.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-03-28 10:42:47 +03:00
Heinrich Schuchardt
17394f9a66 efi_loader: TODO for the EFI file protocol
We currently only support EFI_FILE_PROTOCOL_REVISION while
UEFI specs 2.4 - 2.7 prescribe EFI_FILE_PROTOCOL_REVISION2.
Add a todo.

Add missing constants for the EFI file protocol revision.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-03-27 21:52:11 +01:00
Patrick Delaunay
abe66b1b5d Convert CONFIG_ENV_SPI_* to Kconfig
This converts the following to Kconfig:
  CONFIG_ENV_SPI_BUS
  CONFIG_ENV_SPI_CS
  CONFIG_ENV_SPI_MAX_HZ
  CONFIG_ENV_SPI_MODE

Most of time these value are not needed, CONFIG_SF_DEFAULT
with same value is used, so I introduced CONFIG_USE_ENV_SPI_*
to force the associated value for the environment.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25 17:36:59 -04:00
Patrick Delaunay
c95e632de4 Convert CONFIG_DEFAULT_SPI_* to Kconfig
This converts the following to Kconfig:
   CONFIG_DEFAULT_SPI_BUS
   CONFIG_DEFAULT_SPI_MODE

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25 17:36:53 -04:00
Patrick Delaunay
14453fbfad Convert CONFIG_SF_DEFAULT_* to Kconfig
This converts the following to Kconfig:
  CONFIG_SF_DEFAULT_BUS
  CONFIG_SF_DEFAULT_CS
  CONFIG_SF_DEFAULT_MODE
  CONFIG_SF_DEFAULT_SPEED

I use moveconfig script and then manual check on generated u-boot.cfg
to solve the remaining issue.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25 17:36:53 -04:00
Patrick Delaunay
ac31d0d873 exynos: replace CONFIG_ENV_SPI_BASE by CONFIG_SYS_SPI_BASE
Replace CONFIG_ENV_SPI_BASE by the better CONFIG_SYS_SPI_BASE
(it is not the location for environment but the location for U-Boot)
and, as it is the only platform with use this define, remove
it from whitelist.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25 17:35:52 -04:00
Patrick Delaunay
e608bebd77 controlcenterdc: move some configuration in defconfig file
Move some configurations in defconfig file
- CONFIG_CMD_I2C
- CONFIG_CMD_SPI

This allow correct dependency handling in Kconfig.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25 17:35:52 -04:00
Patrick Delaunay
a1b7132157 bcm7445: move some configuration in defconfig file
Move some configurations in defconfig file
- CONFIG_DM_SPI (removed by syncing defconfigs )
- CONFIG_CMD_SF
- CONFIG_CMD_SPI
- CONFIG_CMD_SF_TEST

This allow correct dependency handling in Kconfig.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25 17:35:52 -04:00
Sébastien Szymanski
2e7365518a fs: ext4: do not write on filesystem with metadata_csum feature
U-Boot doesn't support metadata_csum feature. Writing to filesystem with
metadata_csum feature makes the filesystem corrupted and unbootable by
Linux:

[    2.527495] EXT4-fs (mmcblk0p2): ext4_check_descriptors: Checksum for group 0 failed (52188!=0)
[    2.537421] EXT4-fs (mmcblk0p2): ext4_check_descriptors: Checksum for group 1 failed (5262!=0)
...
[    2.653308] EXT4-fs (mmcblk0p2): ext4_check_descriptors: Checksum for group 14 failed (42611!=0)
[    2.662179] EXT4-fs (mmcblk0p2): ext4_check_descriptors: Checksum for group 15 failed (21527!=0)
[    2.687920] JBD2: journal checksum error
[    2.691982] EXT4-fs (mmcblk0p2): error loading journal
[    2.698292] VFS: Cannot open root device "mmcblk0p2" or unknown-block(179,2): error -74

Don't write to filesystem with meatadata_csum feature to not corrupt the
filesystem.

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2019-03-22 12:15:24 -04:00
Stefan Roese
2253d648f1 pci: Add comment to mention difference in DEVFN usage in U-Boot vs Linux
This patch adds a comment to the header with the PCI_foo macros related
to DEVFN to explain the difference in U-Boot vs Linux.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-03-22 12:15:20 -04:00
Heinrich Schuchardt
9eebaba2a8 cmd: set CONFIG_SYS_HELP_CMD_WIDTH = 10
CONFIG_SYS_HELP_CMD_WIDTH is used to format the output of help without any
arguments.

CONFIG_SYS_HELP_CMD_WIDTH = 8 is too narrow to fit all our commands.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-03-22 08:35:50 -04:00
Tom Rini
810ae23fbc Merge branch 'master' of git://git.denx.de/u-boot-socfpga 2019-03-19 07:13:23 -04:00
Simon Goldschmidt
92a47459bb arm: socfpga: make SPL_TEXT_BASE overridable
To boot from fpga on socfpga gen5, we need to set CONFIG_SPL_TEXT_BASE to
0xC0000000 (hps2fpgaslaves base address).

Since converting CONFIG_SPL_TEXT_BASE to Kconfig hasn't been successful so
far, let's make this value overridable in socfpga_common.h, so that we can
have different board configs override this in socfpga_common.h.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-03-16 13:30:09 +01:00
Tom Rini
8303467e80 Merge git://git.denx.de/u-boot-fsl-qoriq
- DPAA2 fixes and DDR errata workaround for LS1021A
2019-03-15 11:58:17 -04:00
Alison Wang
158097052a armv7: ls102xa: Add workaround for DDR erratum A-008850
Barrier transactions from CCI400 need to be disabled till
the DDR is configured, otherwise it may lead to system hang.
The patch adds workaround to fix the erratum.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Signed-off-by: Alison Wang <alison.wang@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-15 11:52:01 +05:30
Meenakshi Aggarwal
43ad41e6ae mc : Reduce MC memory size to 128M
ls2088, ls1088 : minimum MC Memory size is 128 MB
lx2 : minimum MC memory size is 256 MB

Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-15 11:52:00 +05:30
Soeren Moch
4b387deb78 board: tbs2910: Fix default environment
Especially fix usb keyboard support. Other changes are only for
beautification.

Signed-off-by: Soeren Moch <smoch@web.de>
2019-03-14 20:19:26 +01:00
Tom Rini
9659eb46af Merge branch 'master' of git://git.denx.de/u-boot-samsung 2019-03-14 11:37:11 -04:00
Adam Ford
12d64098a5 ARM: imx6_logic: Fix typo in FDT address
A few scripts reference 'fdt_addr' when they should reference
'fdt_addr_r' so this patch fixes those broken references.

Signed-off-by: Adam Ford <aford173@gmail.com>
2019-03-13 09:14:35 +01:00
Shyam Saini
3f77c933ee include: configs: imx6-engicam: Add recovery boot option
Combined with watchdog board reset mechanism, this can be used as recovery
boot option after bootlimit exceeds the configured value.

Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
2019-03-13 09:14:35 +01:00
Fabio Estevam
15b7e91f5c imx8mq_evk: Move CONFIG_ENV_IS_IN_MMC to Kconfig
Currently the command "saveenv" is not available.

The CONFIG_ENV_IS_IN_MMC symbol has been converted to Kconfig,
so fix the problem by moving it to the defconfig.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-03-13 09:14:35 +01:00
Fabio Estevam
0a112072bb pico-imx6ul: Convert to DM_PMIC
Convert to use DM_PMIC for the PFUZE3000. Since this PMIC is
under an I2C bus, conver to DM_I2C as well.

Also, since I2C is not used in SPL, remove CONFIG_SPL_I2C_SUPPORT
to avoid build warnings.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2019-03-13 09:14:35 +01:00
Minkyu Kang
934e728795 espresso7420: remove duplicated config
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11 15:53:55 +09:00
Krzysztof Kozlowski
e6b1467081 arm: exynos: Remove duplicated "boardname" env setting
Various places in the code set "boardname" env property.  It was used
for booting from ITB images and choosing proper DTB file name.  Instead
of duplicating it, use existing U-Boot wide - "board_name".

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11 15:53:29 +09:00
Krzysztof Kozlowski
d9cab9f920 configs: odroid_xu3: Unify indentation
File mixed space and tab indentation.  Unify it.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11 15:53:29 +09:00
Krzysztof Kozlowski
08e0ee059c configs: odroid_xu3: Use consistent syntax for #include
When including other header from configs, use consistent <> syntax.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11 15:53:29 +09:00
Krzysztof Kozlowski
e66d1cb3c2 regulator: Add support for ramp delay
Changing voltage and enabling regulator might require delays so the
regulator stabilizes at expected level.

Add support for "regulator-ramp-delay" binding which can introduce
required time to both enabling the regulator and to changing the
voltage.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11 15:53:19 +09:00
Krzysztof Kozlowski
e3ee4be321 arm: exynos: Detect revision later, when all resources are ready
Detection of board revision is done early - before power setup.  In case of
Odroid XU3/XU4/HC1 family, the detection is done using ADC which
is supplied by LDO4/VDD_ADC regulator.  This regulator could be turned
off (e.g. by kernel before reboot).  If ADC is used early, the
regulators are not yet available and the detection won't work.

Split the revision detection out of set_board_type() into separate
function called later - either when displaying board info (in late mode)
or during misc_init_r.  The idea is that set_board_type() will be called
early so its method of detection are limited to flattened device tree
(exynos5-dt-types.c for Exynos5) or GPIO (odroid.c for Exynos4412).  The
newly added set_board_revision() can be called only later, when
resources like regulator are available.

This is necessary to fix the detection of Odroid HC1 after reboot, if
kernel turned off the LDO4 regulator.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11 15:53:19 +09:00
Tom Rini
19c8c9c103 Merge branch 'master' of git://git.denx.de/u-boot-socfpga
- Arria10 DRAM fixes and Gen5 cache fixes
2019-03-10 10:16:07 -04:00
Marek Vasut
bd6363a7b7 ARM: socfpga: Fix Arria10 SPI and NAND U-Boot offset
The SPL size on Gen5 is 4*64kiB, but on A10 it is 4*256kiB.
Handle the difference.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Cc: Tien Fong Chee <tien.fong.chee@intel.com>
2019-03-09 17:59:14 +01:00
Marek Vasut
60082d3b3f ARM: socfpga: Drop CONFIG_SYS_NAND_BAD_BLOCK_POS
This is not used anywhere, so drop it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Cc: Tien Fong Chee <tien.fong.chee@intel.com>
2019-03-09 17:59:14 +01:00
Marek Vasut
7544ad0303 ARM: socfpga: Disable D cache in SPL
The bootrom seems to leave the D-cache in messed up state, make sure
the SPL disables it so it can not interfere with operation.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Cc: Tien Fong Chee <tien.fong.chee@intel.com>
2019-03-09 17:59:13 +01:00
Eugeniu Rosca
d245059ff7 ARM: rmobile: rcar-gen3: Activate bootm_size
v2019.01 commit 07a8060a12 ("ARM: rmobile: Convert to bootm_size")
attempted converting to bootm_size of 256 MiB below targets:
 - include/configs/alt.h
 - include/configs/gose.h
 - include/configs/koelsch.h
 - include/configs/lager.h
 - include/configs/porter.h
 - include/configs/rcar-gen3-common.h
 - include/configs/silk.h
 - include/configs/stout.h

The update didn't fully work on R-Car3 due to the
CONFIG_SYS_BOOTMAPSZ=8MiB definition left by v2016.09 commit
e525d34b47 ("ARM: rmobile: Add support salvator-x board"),
which is explained in below README excerpt:

----8<----
CONFIG_SYS_BOOTMAPSZ:
                [..] If CONFIG_SYS_BOOTMAPSZ is undefined,
                then the value in "bootm_size" will be used instead.
----8<----

Allow the original commit to accomplish its purpose on R-Car3 targets
by removing the CONFIG_SYS_BOOTMAPSZ definition.

Fixes: 07a8060a12 ("ARM: rmobile: Convert to bootm_size")
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
2019-03-09 17:57:04 +01:00
Marek Vasut
3f965f2c28 ARM: rmobile: Convert Gen2 Stout, Porter, Silk to DM_SPI{,_FLASH}
Enable DM_SPI and DM_SPI_FLASH in U-Boot on H2 Stout, M2W Porter and E3 Silk.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-09 17:57:04 +01:00