power: rename stpmu1 to official name stpmic1
Alignment with kernel driver name & binding introduced by https://patchwork.kernel.org/cover/10761943/ to use the final marketing name = STPMIC1. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
This commit is contained in:
Patrick Delaunay
parent
d46c22b3fd
commit
42f01aacfd
|
|
@ -295,7 +295,9 @@ F: drivers/misc/stm32mp_fuse.c
|
|||
F: drivers/mmc/stm32_sdmmc2.c
|
||||
F: drivers/phy/phy-stm32-usbphyc.c
|
||||
F: drivers/pinctrl/pinctrl_stm32.c
|
||||
F: drivers/power/pmic/stpmic1.c
|
||||
F: drivers/power/regulator/stm32-vrefbuf.c
|
||||
F: drivers/power/regulator/stpmic1.c
|
||||
F: drivers/ram/stm32mp1/
|
||||
F: drivers/misc/stm32_rcc.c
|
||||
F: drivers/reset/stm32-reset.c
|
||||
|
|
|
|||
|
|
@ -54,8 +54,8 @@
|
|||
i2c-scl-falling-time-ns = <20>;
|
||||
status = "okay";
|
||||
|
||||
pmic: stpmu1@33 {
|
||||
compatible = "st,stpmu1";
|
||||
pmic: stpmic1@33 {
|
||||
compatible = "st,stpmic1";
|
||||
reg = <0x33>;
|
||||
interrupts = <0 2>;
|
||||
interrupt-parent = <&gpioa>;
|
||||
|
|
@ -68,7 +68,7 @@
|
|||
st,usb_control_register = <0x30>;
|
||||
|
||||
regulators {
|
||||
compatible = "st,stpmu1-regulators";
|
||||
compatible = "st,stpmic1-regulators";
|
||||
|
||||
ldo1-supply = <&v3v3>;
|
||||
ldo2-supply = <&v3v3>;
|
||||
|
|
|
|||
|
|
@ -28,7 +28,7 @@ Everything is supported in Linux but U-Boot is limited to:
|
|||
|
||||
And the necessary drivers
|
||||
1. I2C
|
||||
2. STPMU1 (PMIC and regulator)
|
||||
2. STPMIC1 (PMIC and regulator)
|
||||
3. Clock, Reset, Sysreset
|
||||
4. Fuse
|
||||
|
||||
|
|
@ -70,10 +70,10 @@ Each board is configurated only with the associated device tree.
|
|||
You need to select the appropriate device tree for your board,
|
||||
the supported device trees for stm32mp157 are:
|
||||
|
||||
+ ev1: eval board with pmic stpmu1 (ev1 = mother board + daughter ed1)
|
||||
+ ev1: eval board with pmic stpmic1 (ev1 = mother board + daughter ed1)
|
||||
dts: stm32mp157c-ev1
|
||||
|
||||
+ ed1: daughter board with pmic stpmu1
|
||||
+ ed1: daughter board with pmic stpmic1
|
||||
dts: stm32mp157c-ed1
|
||||
|
||||
5. Build Procedure
|
||||
|
|
|
|||
|
|
@ -37,64 +37,65 @@ void board_debug_uart_init(void)
|
|||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_PMIC_STPMU1
|
||||
#ifdef CONFIG_PMIC_STPMIC1
|
||||
int board_ddr_power_init(void)
|
||||
{
|
||||
struct udevice *dev;
|
||||
int ret;
|
||||
|
||||
ret = uclass_get_device_by_driver(UCLASS_PMIC,
|
||||
DM_GET_DRIVER(pmic_stpmu1), &dev);
|
||||
DM_GET_DRIVER(pmic_stpmic1), &dev);
|
||||
if (ret)
|
||||
/* No PMIC on board */
|
||||
return 0;
|
||||
|
||||
/* Set LDO3 to sync mode */
|
||||
ret = pmic_reg_read(dev, STPMU1_LDOX_CTRL_REG(STPMU1_LDO3));
|
||||
/* VTT = Set LDO3 to sync mode */
|
||||
ret = pmic_reg_read(dev, STPMIC1_LDOX_CTRL_REG(STPMIC1_LDO3));
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ret &= ~STPMU1_LDO3_MODE;
|
||||
ret &= ~STPMU1_LDO12356_OUTPUT_MASK;
|
||||
ret |= STPMU1_LDO3_DDR_SEL << STPMU1_LDO12356_OUTPUT_SHIFT;
|
||||
ret &= ~STPMIC1_LDO3_MODE;
|
||||
ret &= ~STPMIC1_LDO12356_OUTPUT_MASK;
|
||||
ret |= STPMIC1_LDO3_DDR_SEL << STPMIC1_LDO12356_OUTPUT_SHIFT;
|
||||
|
||||
ret = pmic_reg_write(dev, STPMU1_LDOX_CTRL_REG(STPMU1_LDO3),
|
||||
ret = pmic_reg_write(dev, STPMIC1_LDOX_CTRL_REG(STPMIC1_LDO3),
|
||||
ret);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/* Set BUCK2 to 1.35V */
|
||||
/* VDD_DDR = Set BUCK2 to 1.35V */
|
||||
ret = pmic_clrsetbits(dev,
|
||||
STPMU1_BUCKX_CTRL_REG(STPMU1_BUCK2),
|
||||
STPMU1_BUCK_OUTPUT_MASK,
|
||||
STPMU1_BUCK2_1350000V);
|
||||
STPMIC1_BUCKX_CTRL_REG(STPMIC1_BUCK2),
|
||||
STPMIC1_BUCK_OUTPUT_MASK,
|
||||
STPMIC1_BUCK2_1350000V);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/* Enable BUCK2 and VREF */
|
||||
/* Enable VDD_DDR = BUCK2 */
|
||||
ret = pmic_clrsetbits(dev,
|
||||
STPMU1_BUCKX_CTRL_REG(STPMU1_BUCK2),
|
||||
STPMU1_BUCK_EN, STPMU1_BUCK_EN);
|
||||
STPMIC1_BUCKX_CTRL_REG(STPMIC1_BUCK2),
|
||||
STPMIC1_BUCK_EN, STPMIC1_BUCK_EN);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
mdelay(STPMU1_DEFAULT_START_UP_DELAY_MS);
|
||||
mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
|
||||
|
||||
ret = pmic_clrsetbits(dev, STPMU1_VREF_CTRL_REG,
|
||||
STPMU1_VREF_EN, STPMU1_VREF_EN);
|
||||
/* Enable VREF */
|
||||
ret = pmic_clrsetbits(dev, STPMIC1_VREF_CTRL_REG,
|
||||
STPMIC1_VREF_EN, STPMIC1_VREF_EN);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
mdelay(STPMU1_DEFAULT_START_UP_DELAY_MS);
|
||||
mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
|
||||
|
||||
/* Enable LDO3 */
|
||||
ret = pmic_clrsetbits(dev,
|
||||
STPMU1_LDOX_CTRL_REG(STPMU1_LDO3),
|
||||
STPMU1_LDO_EN, STPMU1_LDO_EN);
|
||||
STPMIC1_LDOX_CTRL_REG(STPMIC1_LDO3),
|
||||
STPMIC1_LDO_EN, STPMIC1_LDO_EN);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
mdelay(STPMU1_DEFAULT_START_UP_DELAY_MS);
|
||||
mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -17,16 +17,16 @@
|
|||
void spl_board_init(void)
|
||||
{
|
||||
/* Keep vdd on during the reset cycle */
|
||||
#if defined(CONFIG_PMIC_STPMU1) && defined(CONFIG_SPL_POWER_SUPPORT)
|
||||
#if defined(CONFIG_PMIC_STPMIC1) && defined(CONFIG_SPL_POWER_SUPPORT)
|
||||
struct udevice *dev;
|
||||
int ret;
|
||||
|
||||
ret = uclass_get_device_by_driver(UCLASS_PMIC,
|
||||
DM_GET_DRIVER(pmic_stpmu1), &dev);
|
||||
DM_GET_DRIVER(pmic_stpmic1), &dev);
|
||||
if (!ret)
|
||||
pmic_clrsetbits(dev,
|
||||
STPMU1_MASK_RESET_BUCK,
|
||||
STPMU1_MASK_RESET_BUCK3,
|
||||
STPMU1_MASK_RESET_BUCK3);
|
||||
STPMIC1_MASK_RESET_BUCK,
|
||||
STPMIC1_MASK_RESET_BUCK3,
|
||||
STPMIC1_MASK_RESET_BUCK3);
|
||||
#endif
|
||||
}
|
||||
|
|
|
|||
|
|
@ -59,11 +59,11 @@ CONFIG_PHY_STM32_USBPHYC=y
|
|||
# CONFIG_SPL_PINCTRL_FULL is not set
|
||||
CONFIG_DM_PMIC=y
|
||||
# CONFIG_SPL_PMIC_CHILDREN is not set
|
||||
CONFIG_PMIC_STPMU1=y
|
||||
CONFIG_PMIC_STPMIC1=y
|
||||
CONFIG_DM_REGULATOR_FIXED=y
|
||||
CONFIG_DM_REGULATOR_GPIO=y
|
||||
CONFIG_DM_REGULATOR_STM32_VREFBUF=y
|
||||
CONFIG_DM_REGULATOR_STPMU1=y
|
||||
CONFIG_DM_REGULATOR_STPMIC1=y
|
||||
CONFIG_SERIAL_RX_BUFFER=y
|
||||
CONFIG_STM32_SERIAL=y
|
||||
CONFIG_USB=y
|
||||
|
|
|
|||
|
|
@ -50,11 +50,11 @@ CONFIG_PHY=y
|
|||
CONFIG_PHY_STM32_USBPHYC=y
|
||||
# CONFIG_PINCTRL_FULL is not set
|
||||
CONFIG_DM_PMIC=y
|
||||
CONFIG_PMIC_STPMU1=y
|
||||
CONFIG_PMIC_STPMIC1=y
|
||||
CONFIG_DM_REGULATOR_FIXED=y
|
||||
CONFIG_DM_REGULATOR_GPIO=y
|
||||
CONFIG_DM_REGULATOR_STM32_VREFBUF=y
|
||||
CONFIG_DM_REGULATOR_STPMU1=y
|
||||
CONFIG_DM_REGULATOR_STPMIC1=y
|
||||
CONFIG_SERIAL_RX_BUFFER=y
|
||||
CONFIG_STM32_SERIAL=y
|
||||
CONFIG_USB=y
|
||||
|
|
|
|||
|
|
@ -231,10 +231,10 @@ config DM_PMIC_TPS65910
|
|||
DC-DC converter, 8 LDOs and a RTC. This driver binds the SMPS and LDO
|
||||
pmic children.
|
||||
|
||||
config PMIC_STPMU1
|
||||
bool "Enable support for STMicroelectronics STPMU1 PMIC"
|
||||
config PMIC_STPMIC1
|
||||
bool "Enable support for STMicroelectronics STPMIC1 PMIC"
|
||||
depends on DM_PMIC && DM_I2C
|
||||
---help---
|
||||
The STPMU1 PMIC provides 4 BUCKs, 6 LDOs, 1 VREF and 2 power switches.
|
||||
The STPMIC1 PMIC provides 4 BUCKs, 6 LDOs, 1 VREF and 2 power switches.
|
||||
It is accessed via an I2C interface. The device is used with STM32MP1
|
||||
SoCs. This driver implements register read/write operations.
|
||||
|
|
|
|||
|
|
@ -23,7 +23,7 @@ obj-$(CONFIG_DM_PMIC_TPS65910) += pmic_tps65910_dm.o
|
|||
obj-$(CONFIG_$(SPL_)PMIC_PALMAS) += palmas.o
|
||||
obj-$(CONFIG_$(SPL_)PMIC_LP873X) += lp873x.o
|
||||
obj-$(CONFIG_$(SPL_)PMIC_LP87565) += lp87565.o
|
||||
obj-$(CONFIG_PMIC_STPMU1) += stpmic1.o
|
||||
obj-$(CONFIG_PMIC_STPMIC1) += stpmic1.o
|
||||
|
||||
obj-$(CONFIG_POWER_LTC3676) += pmic_ltc3676.o
|
||||
obj-$(CONFIG_POWER_MAX77696) += pmic_max77696.o
|
||||
|
|
|
|||
|
|
@ -10,26 +10,26 @@
|
|||
#include <power/pmic.h>
|
||||
#include <power/stpmic1.h>
|
||||
|
||||
#define STMPU1_NUM_OF_REGS 0x100
|
||||
#define STPMIC1_NUM_OF_REGS 0x100
|
||||
|
||||
#ifndef CONFIG_SPL_BUILD
|
||||
static const struct pmic_child_info stpmu1_children_info[] = {
|
||||
{ .prefix = "ldo", .driver = "stpmu1_ldo" },
|
||||
{ .prefix = "buck", .driver = "stpmu1_buck" },
|
||||
{ .prefix = "vref_ddr", .driver = "stpmu1_vref_ddr" },
|
||||
{ .prefix = "pwr_sw", .driver = "stpmu1_pwr_sw" },
|
||||
{ .prefix = "boost", .driver = "stpmu1_boost" },
|
||||
#if CONFIG_IS_ENABLED(DM_REGULATOR)
|
||||
static const struct pmic_child_info stpmic1_children_info[] = {
|
||||
{ .prefix = "ldo", .driver = "stpmic1_ldo" },
|
||||
{ .prefix = "buck", .driver = "stpmic1_buck" },
|
||||
{ .prefix = "vref_ddr", .driver = "stpmic1_vref_ddr" },
|
||||
{ .prefix = "pwr_sw", .driver = "stpmic1_pwr_sw" },
|
||||
{ .prefix = "boost", .driver = "stpmic1_boost" },
|
||||
{ },
|
||||
};
|
||||
#endif /* CONFIG_SPL_BUILD */
|
||||
#endif /* DM_REGULATOR */
|
||||
|
||||
static int stpmu1_reg_count(struct udevice *dev)
|
||||
static int stpmic1_reg_count(struct udevice *dev)
|
||||
{
|
||||
return STMPU1_NUM_OF_REGS;
|
||||
return STPMIC1_NUM_OF_REGS;
|
||||
}
|
||||
|
||||
static int stpmu1_write(struct udevice *dev, uint reg, const uint8_t *buff,
|
||||
int len)
|
||||
static int stpmic1_write(struct udevice *dev, uint reg, const uint8_t *buff,
|
||||
int len)
|
||||
{
|
||||
int ret;
|
||||
|
||||
|
|
@ -41,7 +41,7 @@ static int stpmu1_write(struct udevice *dev, uint reg, const uint8_t *buff,
|
|||
return ret;
|
||||
}
|
||||
|
||||
static int stpmu1_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
|
||||
static int stpmic1_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
|
||||
{
|
||||
int ret;
|
||||
|
||||
|
|
@ -53,43 +53,43 @@ static int stpmu1_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
|
|||
return ret;
|
||||
}
|
||||
|
||||
static int stpmu1_bind(struct udevice *dev)
|
||||
static int stpmic1_bind(struct udevice *dev)
|
||||
{
|
||||
#ifndef CONFIG_SPL_BUILD
|
||||
#if CONFIG_IS_ENABLED(DM_REGULATOR)
|
||||
ofnode regulators_node;
|
||||
int children;
|
||||
|
||||
regulators_node = dev_read_subnode(dev, "regulators");
|
||||
if (!ofnode_valid(regulators_node)) {
|
||||
dev_dbg(dev, "regulators subnode not found!\n");
|
||||
dev_dbg(dev, "regulators subnode not found!");
|
||||
return -ENXIO;
|
||||
}
|
||||
dev_dbg(dev, "found regulators subnode\n");
|
||||
|
||||
children = pmic_bind_children(dev, regulators_node,
|
||||
stpmu1_children_info);
|
||||
stpmic1_children_info);
|
||||
if (!children)
|
||||
dev_dbg(dev, "no child found\n");
|
||||
#endif /* CONFIG_SPL_BUILD */
|
||||
#endif /* DM_REGULATOR */
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct dm_pmic_ops stpmu1_ops = {
|
||||
.reg_count = stpmu1_reg_count,
|
||||
.read = stpmu1_read,
|
||||
.write = stpmu1_write,
|
||||
static struct dm_pmic_ops stpmic1_ops = {
|
||||
.reg_count = stpmic1_reg_count,
|
||||
.read = stpmic1_read,
|
||||
.write = stpmic1_write,
|
||||
};
|
||||
|
||||
static const struct udevice_id stpmu1_ids[] = {
|
||||
{ .compatible = "st,stpmu1" },
|
||||
static const struct udevice_id stpmic1_ids[] = {
|
||||
{ .compatible = "st,stpmic1" },
|
||||
{ }
|
||||
};
|
||||
|
||||
U_BOOT_DRIVER(pmic_stpmu1) = {
|
||||
.name = "stpmu1_pmic",
|
||||
U_BOOT_DRIVER(pmic_stpmic1) = {
|
||||
.name = "stpmic1_pmic",
|
||||
.id = UCLASS_PMIC,
|
||||
.of_match = stpmu1_ids,
|
||||
.bind = stpmu1_bind,
|
||||
.ops = &stpmu1_ops,
|
||||
.of_match = stpmic1_ids,
|
||||
.bind = stpmic1_bind,
|
||||
.ops = &stpmic1_ops,
|
||||
};
|
||||
|
|
|
|||
|
|
@ -244,11 +244,17 @@ config DM_REGULATOR_TPS65910
|
|||
regulator types of the TPS65910 (BUCK, BOOST and LDO). It implements
|
||||
the get/set api for value and enable.
|
||||
|
||||
config DM_REGULATOR_STPMU1
|
||||
bool "Enable driver for STPMU1 regulators"
|
||||
depends on DM_REGULATOR && PMIC_STPMU1
|
||||
config DM_REGULATOR_STPMIC1
|
||||
bool "Enable driver for STPMIC1 regulators"
|
||||
depends on DM_REGULATOR && PMIC_STPMIC1
|
||||
---help---
|
||||
Enable support for the regulator functions of the STPMU1 PMIC. The
|
||||
Enable support for the regulator functions of the STPMIC1 PMIC. The
|
||||
driver implements get/set api for the various BUCKS and LDOs supported
|
||||
by the PMIC device. This driver is controlled by a device tree node
|
||||
which includes voltage limits.
|
||||
|
||||
config SPL_DM_REGULATOR_STPMIC1
|
||||
bool "Enable driver for STPMIC1 regulators in SPL"
|
||||
depends on SPL_DM_REGULATOR && PMIC_STPMIC1
|
||||
help
|
||||
Enable support for the regulator functions of the STPMIC1 PMIC in SPL.
|
||||
|
|
|
|||
|
|
@ -24,4 +24,4 @@ obj-$(CONFIG_$(SPL_)DM_REGULATOR_LP873X) += lp873x_regulator.o
|
|||
obj-$(CONFIG_$(SPL_)DM_REGULATOR_LP87565) += lp87565_regulator.o
|
||||
obj-$(CONFIG_$(SPL_)DM_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o
|
||||
obj-$(CONFIG_DM_REGULATOR_TPS65910) += tps65910_regulator.o
|
||||
obj-$(CONFIG_$(SPL_)DM_REGULATOR_STPMU1) += stpmic1.o
|
||||
obj-$(CONFIG_$(SPL_)DM_REGULATOR_STPMIC1) += stpmic1.o
|
||||
|
|
|
|||
|
|
@ -11,44 +11,44 @@
|
|||
#include <power/regulator.h>
|
||||
#include <power/stpmic1.h>
|
||||
|
||||
struct stpmu1_range {
|
||||
struct stpmic1_range {
|
||||
int min_uv;
|
||||
int min_sel;
|
||||
int max_sel;
|
||||
int step;
|
||||
};
|
||||
|
||||
struct stpmu1_output_range {
|
||||
const struct stpmu1_range *ranges;
|
||||
struct stpmic1_output {
|
||||
const struct stpmic1_range *ranges;
|
||||
int nbranges;
|
||||
};
|
||||
|
||||
#define STPMU1_MODE(_id, _val, _name) { \
|
||||
#define STPMIC1_MODE(_id, _val, _name) { \
|
||||
.id = _id, \
|
||||
.register_value = _val, \
|
||||
.name = _name, \
|
||||
}
|
||||
|
||||
#define STPMU1_RANGE(_min_uv, _min_sel, _max_sel, _step) { \
|
||||
#define STPMIC1_RANGE(_min_uv, _min_sel, _max_sel, _step) { \
|
||||
.min_uv = _min_uv, \
|
||||
.min_sel = _min_sel, \
|
||||
.max_sel = _max_sel, \
|
||||
.step = _step, \
|
||||
}
|
||||
|
||||
#define STPMU1_OUTPUT_RANGE(_ranges, _nbranges) { \
|
||||
#define STPMIC1_OUTPUT(_ranges, _nbranges) { \
|
||||
.ranges = _ranges, \
|
||||
.nbranges = _nbranges, \
|
||||
}
|
||||
|
||||
static int stpmu1_output_find_uv(int sel,
|
||||
const struct stpmu1_output_range *output_range)
|
||||
static int stpmic1_output_find_uv(int sel,
|
||||
const struct stpmic1_output *output)
|
||||
{
|
||||
const struct stpmu1_range *range;
|
||||
const struct stpmic1_range *range;
|
||||
int i;
|
||||
|
||||
for (i = 0, range = output_range->ranges;
|
||||
i < output_range->nbranges; i++, range++) {
|
||||
for (i = 0, range = output->ranges;
|
||||
i < output->nbranges; i++, range++) {
|
||||
if (sel >= range->min_sel && sel <= range->max_sel)
|
||||
return range->min_uv +
|
||||
(sel - range->min_sel) * range->step;
|
||||
|
|
@ -57,14 +57,14 @@ static int stpmu1_output_find_uv(int sel,
|
|||
return -EINVAL;
|
||||
}
|
||||
|
||||
static int stpmu1_output_find_sel(int uv,
|
||||
const struct stpmu1_output_range *output_range)
|
||||
static int stpmic1_output_find_sel(int uv,
|
||||
const struct stpmic1_output *output)
|
||||
{
|
||||
const struct stpmu1_range *range;
|
||||
const struct stpmic1_range *range;
|
||||
int i;
|
||||
|
||||
for (i = 0, range = output_range->ranges;
|
||||
i < output_range->nbranges; i++, range++) {
|
||||
for (i = 0, range = output->ranges;
|
||||
i < output->nbranges; i++, range++) {
|
||||
if (uv == range->min_uv && !range->step)
|
||||
return range->min_sel;
|
||||
|
||||
|
|
@ -82,157 +82,157 @@ static int stpmu1_output_find_sel(int uv,
|
|||
* BUCK regulators
|
||||
*/
|
||||
|
||||
static const struct stpmu1_range buck1_ranges[] = {
|
||||
STPMU1_RANGE(725000, 0, 4, 0),
|
||||
STPMU1_RANGE(725000, 5, 36, 25000),
|
||||
STPMU1_RANGE(1500000, 37, 63, 0),
|
||||
static const struct stpmic1_range buck1_ranges[] = {
|
||||
STPMIC1_RANGE(725000, 0, 4, 0),
|
||||
STPMIC1_RANGE(725000, 5, 36, 25000),
|
||||
STPMIC1_RANGE(1500000, 37, 63, 0),
|
||||
};
|
||||
|
||||
static const struct stpmu1_range buck2_ranges[] = {
|
||||
STPMU1_RANGE(1000000, 0, 17, 0),
|
||||
STPMU1_RANGE(1050000, 18, 19, 0),
|
||||
STPMU1_RANGE(1100000, 20, 21, 0),
|
||||
STPMU1_RANGE(1150000, 22, 23, 0),
|
||||
STPMU1_RANGE(1200000, 24, 25, 0),
|
||||
STPMU1_RANGE(1250000, 26, 27, 0),
|
||||
STPMU1_RANGE(1300000, 28, 29, 0),
|
||||
STPMU1_RANGE(1350000, 30, 31, 0),
|
||||
STPMU1_RANGE(1400000, 32, 33, 0),
|
||||
STPMU1_RANGE(1450000, 34, 35, 0),
|
||||
STPMU1_RANGE(1500000, 36, 63, 0),
|
||||
static const struct stpmic1_range buck2_ranges[] = {
|
||||
STPMIC1_RANGE(1000000, 0, 17, 0),
|
||||
STPMIC1_RANGE(1050000, 18, 19, 0),
|
||||
STPMIC1_RANGE(1100000, 20, 21, 0),
|
||||
STPMIC1_RANGE(1150000, 22, 23, 0),
|
||||
STPMIC1_RANGE(1200000, 24, 25, 0),
|
||||
STPMIC1_RANGE(1250000, 26, 27, 0),
|
||||
STPMIC1_RANGE(1300000, 28, 29, 0),
|
||||
STPMIC1_RANGE(1350000, 30, 31, 0),
|
||||
STPMIC1_RANGE(1400000, 32, 33, 0),
|
||||
STPMIC1_RANGE(1450000, 34, 35, 0),
|
||||
STPMIC1_RANGE(1500000, 36, 63, 0),
|
||||
};
|
||||
|
||||
static const struct stpmu1_range buck3_ranges[] = {
|
||||
STPMU1_RANGE(1000000, 0, 19, 0),
|
||||
STPMU1_RANGE(1100000, 20, 23, 0),
|
||||
STPMU1_RANGE(1200000, 24, 27, 0),
|
||||
STPMU1_RANGE(1300000, 28, 31, 0),
|
||||
STPMU1_RANGE(1400000, 32, 35, 0),
|
||||
STPMU1_RANGE(1500000, 36, 55, 100000),
|
||||
STPMU1_RANGE(3400000, 56, 63, 0),
|
||||
static const struct stpmic1_range buck3_ranges[] = {
|
||||
STPMIC1_RANGE(1000000, 0, 19, 0),
|
||||
STPMIC1_RANGE(1100000, 20, 23, 0),
|
||||
STPMIC1_RANGE(1200000, 24, 27, 0),
|
||||
STPMIC1_RANGE(1300000, 28, 31, 0),
|
||||
STPMIC1_RANGE(1400000, 32, 35, 0),
|
||||
STPMIC1_RANGE(1500000, 36, 55, 100000),
|
||||
STPMIC1_RANGE(3400000, 56, 63, 0),
|
||||
};
|
||||
|
||||
static const struct stpmu1_range buck4_ranges[] = {
|
||||
STPMU1_RANGE(600000, 0, 27, 25000),
|
||||
STPMU1_RANGE(1300000, 28, 29, 0),
|
||||
STPMU1_RANGE(1350000, 30, 31, 0),
|
||||
STPMU1_RANGE(1400000, 32, 33, 0),
|
||||
STPMU1_RANGE(1450000, 34, 35, 0),
|
||||
STPMU1_RANGE(1500000, 36, 60, 100000),
|
||||
STPMU1_RANGE(3900000, 61, 63, 0),
|
||||
static const struct stpmic1_range buck4_ranges[] = {
|
||||
STPMIC1_RANGE(600000, 0, 27, 25000),
|
||||
STPMIC1_RANGE(1300000, 28, 29, 0),
|
||||
STPMIC1_RANGE(1350000, 30, 31, 0),
|
||||
STPMIC1_RANGE(1400000, 32, 33, 0),
|
||||
STPMIC1_RANGE(1450000, 34, 35, 0),
|
||||
STPMIC1_RANGE(1500000, 36, 60, 100000),
|
||||
STPMIC1_RANGE(3900000, 61, 63, 0),
|
||||
};
|
||||
|
||||
/* BUCK: 1,2,3,4 - voltage ranges */
|
||||
static const struct stpmu1_output_range buck_voltage_range[] = {
|
||||
STPMU1_OUTPUT_RANGE(buck1_ranges, ARRAY_SIZE(buck1_ranges)),
|
||||
STPMU1_OUTPUT_RANGE(buck2_ranges, ARRAY_SIZE(buck2_ranges)),
|
||||
STPMU1_OUTPUT_RANGE(buck3_ranges, ARRAY_SIZE(buck3_ranges)),
|
||||
STPMU1_OUTPUT_RANGE(buck4_ranges, ARRAY_SIZE(buck4_ranges)),
|
||||
static const struct stpmic1_output buck_voltage_range[] = {
|
||||
STPMIC1_OUTPUT(buck1_ranges, ARRAY_SIZE(buck1_ranges)),
|
||||
STPMIC1_OUTPUT(buck2_ranges, ARRAY_SIZE(buck2_ranges)),
|
||||
STPMIC1_OUTPUT(buck3_ranges, ARRAY_SIZE(buck3_ranges)),
|
||||
STPMIC1_OUTPUT(buck4_ranges, ARRAY_SIZE(buck4_ranges)),
|
||||
};
|
||||
|
||||
/* BUCK modes */
|
||||
static const struct dm_regulator_mode buck_modes[] = {
|
||||
STPMU1_MODE(STPMU1_BUCK_MODE_HP, STPMU1_BUCK_MODE_HP, "HP"),
|
||||
STPMU1_MODE(STPMU1_BUCK_MODE_LP, STPMU1_BUCK_MODE_LP, "LP"),
|
||||
STPMIC1_MODE(STPMIC1_BUCK_MODE_HP, STPMIC1_BUCK_MODE_HP, "HP"),
|
||||
STPMIC1_MODE(STPMIC1_BUCK_MODE_LP, STPMIC1_BUCK_MODE_LP, "LP"),
|
||||
};
|
||||
|
||||
static int stpmu1_buck_get_uv(struct udevice *dev, int buck)
|
||||
static int stpmic1_buck_get_uv(struct udevice *dev, int buck)
|
||||
{
|
||||
int sel;
|
||||
|
||||
sel = pmic_reg_read(dev, STPMU1_BUCKX_CTRL_REG(buck));
|
||||
sel = pmic_reg_read(dev, STPMIC1_BUCKX_CTRL_REG(buck));
|
||||
if (sel < 0)
|
||||
return sel;
|
||||
|
||||
sel &= STPMU1_BUCK_OUTPUT_MASK;
|
||||
sel >>= STPMU1_BUCK_OUTPUT_SHIFT;
|
||||
sel &= STPMIC1_BUCK_OUTPUT_MASK;
|
||||
sel >>= STPMIC1_BUCK_OUTPUT_SHIFT;
|
||||
|
||||
return stpmu1_output_find_uv(sel, &buck_voltage_range[buck]);
|
||||
return stpmic1_output_find_uv(sel, &buck_voltage_range[buck]);
|
||||
}
|
||||
|
||||
static int stpmu1_buck_get_value(struct udevice *dev)
|
||||
static int stpmic1_buck_get_value(struct udevice *dev)
|
||||
{
|
||||
return stpmu1_buck_get_uv(dev->parent, dev->driver_data - 1);
|
||||
return stpmic1_buck_get_uv(dev->parent, dev->driver_data - 1);
|
||||
}
|
||||
|
||||
static int stpmu1_buck_set_value(struct udevice *dev, int uv)
|
||||
static int stpmic1_buck_set_value(struct udevice *dev, int uv)
|
||||
{
|
||||
int sel, buck = dev->driver_data - 1;
|
||||
|
||||
sel = stpmu1_output_find_sel(uv, &buck_voltage_range[buck]);
|
||||
sel = stpmic1_output_find_sel(uv, &buck_voltage_range[buck]);
|
||||
if (sel < 0)
|
||||
return sel;
|
||||
|
||||
return pmic_clrsetbits(dev->parent,
|
||||
STPMU1_BUCKX_CTRL_REG(buck),
|
||||
STPMU1_BUCK_OUTPUT_MASK,
|
||||
sel << STPMU1_BUCK_OUTPUT_SHIFT);
|
||||
STPMIC1_BUCKX_CTRL_REG(buck),
|
||||
STPMIC1_BUCK_OUTPUT_MASK,
|
||||
sel << STPMIC1_BUCK_OUTPUT_SHIFT);
|
||||
}
|
||||
|
||||
static int stpmu1_buck_get_enable(struct udevice *dev)
|
||||
static int stpmic1_buck_get_enable(struct udevice *dev)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = pmic_reg_read(dev->parent,
|
||||
STPMU1_BUCKX_CTRL_REG(dev->driver_data - 1));
|
||||
STPMIC1_BUCKX_CTRL_REG(dev->driver_data - 1));
|
||||
if (ret < 0)
|
||||
return false;
|
||||
|
||||
return ret & STPMU1_BUCK_EN ? true : false;
|
||||
return ret & STPMIC1_BUCK_EN ? true : false;
|
||||
}
|
||||
|
||||
static int stpmu1_buck_set_enable(struct udevice *dev, bool enable)
|
||||
static int stpmic1_buck_set_enable(struct udevice *dev, bool enable)
|
||||
{
|
||||
struct dm_regulator_uclass_platdata *uc_pdata;
|
||||
int delay = enable ? STPMU1_DEFAULT_START_UP_DELAY_MS :
|
||||
STPMU1_DEFAULT_STOP_DELAY_MS;
|
||||
int delay = enable ? STPMIC1_DEFAULT_START_UP_DELAY_MS :
|
||||
STPMIC1_DEFAULT_STOP_DELAY_MS;
|
||||
int ret, uv;
|
||||
|
||||
/* if regulator is already in the wanted state, nothing to do */
|
||||
if (stpmu1_buck_get_enable(dev) == enable)
|
||||
if (stpmic1_buck_get_enable(dev) == enable)
|
||||
return 0;
|
||||
|
||||
if (enable) {
|
||||
uc_pdata = dev_get_uclass_platdata(dev);
|
||||
uv = stpmu1_buck_get_value(dev);
|
||||
if ((uv < uc_pdata->min_uV) || (uv > uc_pdata->max_uV))
|
||||
stpmu1_buck_set_value(dev, uc_pdata->min_uV);
|
||||
uv = stpmic1_buck_get_value(dev);
|
||||
if (uv < uc_pdata->min_uV || uv > uc_pdata->max_uV)
|
||||
stpmic1_buck_set_value(dev, uc_pdata->min_uV);
|
||||
}
|
||||
|
||||
ret = pmic_clrsetbits(dev->parent,
|
||||
STPMU1_BUCKX_CTRL_REG(dev->driver_data - 1),
|
||||
STPMU1_BUCK_EN, enable ? STPMU1_BUCK_EN : 0);
|
||||
STPMIC1_BUCKX_CTRL_REG(dev->driver_data - 1),
|
||||
STPMIC1_BUCK_EN, enable ? STPMIC1_BUCK_EN : 0);
|
||||
mdelay(delay);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int stpmu1_buck_get_mode(struct udevice *dev)
|
||||
static int stpmic1_buck_get_mode(struct udevice *dev)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = pmic_reg_read(dev->parent,
|
||||
STPMU1_BUCKX_CTRL_REG(dev->driver_data - 1));
|
||||
STPMIC1_BUCKX_CTRL_REG(dev->driver_data - 1));
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
return ret & STPMU1_BUCK_MODE ? STPMU1_BUCK_MODE_LP :
|
||||
STPMU1_BUCK_MODE_HP;
|
||||
return ret & STPMIC1_BUCK_MODE ? STPMIC1_BUCK_MODE_LP :
|
||||
STPMIC1_BUCK_MODE_HP;
|
||||
}
|
||||
|
||||
static int stpmu1_buck_set_mode(struct udevice *dev, int mode)
|
||||
static int stpmic1_buck_set_mode(struct udevice *dev, int mode)
|
||||
{
|
||||
return pmic_clrsetbits(dev->parent,
|
||||
STPMU1_BUCKX_CTRL_REG(dev->driver_data - 1),
|
||||
STPMU1_BUCK_MODE,
|
||||
mode ? STPMU1_BUCK_MODE : 0);
|
||||
STPMIC1_BUCKX_CTRL_REG(dev->driver_data - 1),
|
||||
STPMIC1_BUCK_MODE,
|
||||
mode ? STPMIC1_BUCK_MODE : 0);
|
||||
}
|
||||
|
||||
static int stpmu1_buck_probe(struct udevice *dev)
|
||||
static int stpmic1_buck_probe(struct udevice *dev)
|
||||
{
|
||||
struct dm_regulator_uclass_platdata *uc_pdata;
|
||||
|
||||
if (!dev->driver_data || dev->driver_data > STPMU1_MAX_BUCK)
|
||||
if (!dev->driver_data || dev->driver_data > STPMIC1_MAX_BUCK)
|
||||
return -EINVAL;
|
||||
|
||||
uc_pdata = dev_get_uclass_platdata(dev);
|
||||
|
|
@ -244,206 +244,206 @@ static int stpmu1_buck_probe(struct udevice *dev)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static const struct dm_regulator_ops stpmu1_buck_ops = {
|
||||
.get_value = stpmu1_buck_get_value,
|
||||
.set_value = stpmu1_buck_set_value,
|
||||
.get_enable = stpmu1_buck_get_enable,
|
||||
.set_enable = stpmu1_buck_set_enable,
|
||||
.get_mode = stpmu1_buck_get_mode,
|
||||
.set_mode = stpmu1_buck_set_mode,
|
||||
static const struct dm_regulator_ops stpmic1_buck_ops = {
|
||||
.get_value = stpmic1_buck_get_value,
|
||||
.set_value = stpmic1_buck_set_value,
|
||||
.get_enable = stpmic1_buck_get_enable,
|
||||
.set_enable = stpmic1_buck_set_enable,
|
||||
.get_mode = stpmic1_buck_get_mode,
|
||||
.set_mode = stpmic1_buck_set_mode,
|
||||
};
|
||||
|
||||
U_BOOT_DRIVER(stpmu1_buck) = {
|
||||
.name = "stpmu1_buck",
|
||||
U_BOOT_DRIVER(stpmic1_buck) = {
|
||||
.name = "stpmic1_buck",
|
||||
.id = UCLASS_REGULATOR,
|
||||
.ops = &stpmu1_buck_ops,
|
||||
.probe = stpmu1_buck_probe,
|
||||
.ops = &stpmic1_buck_ops,
|
||||
.probe = stpmic1_buck_probe,
|
||||
};
|
||||
|
||||
/*
|
||||
* LDO regulators
|
||||
*/
|
||||
|
||||
static const struct stpmu1_range ldo12_ranges[] = {
|
||||
STPMU1_RANGE(1700000, 0, 7, 0),
|
||||
STPMU1_RANGE(1700000, 8, 24, 100000),
|
||||
STPMU1_RANGE(3300000, 25, 31, 0),
|
||||
static const struct stpmic1_range ldo12_ranges[] = {
|
||||
STPMIC1_RANGE(1700000, 0, 7, 0),
|
||||
STPMIC1_RANGE(1700000, 8, 24, 100000),
|
||||
STPMIC1_RANGE(3300000, 25, 31, 0),
|
||||
};
|
||||
|
||||
static const struct stpmu1_range ldo3_ranges[] = {
|
||||
STPMU1_RANGE(1700000, 0, 7, 0),
|
||||
STPMU1_RANGE(1700000, 8, 24, 100000),
|
||||
STPMU1_RANGE(3300000, 25, 30, 0),
|
||||
static const struct stpmic1_range ldo3_ranges[] = {
|
||||
STPMIC1_RANGE(1700000, 0, 7, 0),
|
||||
STPMIC1_RANGE(1700000, 8, 24, 100000),
|
||||
STPMIC1_RANGE(3300000, 25, 30, 0),
|
||||
/* Sel 31 is special case when LDO3 is in mode sync_source (BUCK2/2) */
|
||||
};
|
||||
|
||||
static const struct stpmu1_range ldo5_ranges[] = {
|
||||
STPMU1_RANGE(1700000, 0, 7, 0),
|
||||
STPMU1_RANGE(1700000, 8, 30, 100000),
|
||||
STPMU1_RANGE(3900000, 31, 31, 0),
|
||||
static const struct stpmic1_range ldo5_ranges[] = {
|
||||
STPMIC1_RANGE(1700000, 0, 7, 0),
|
||||
STPMIC1_RANGE(1700000, 8, 30, 100000),
|
||||
STPMIC1_RANGE(3900000, 31, 31, 0),
|
||||
};
|
||||
|
||||
static const struct stpmu1_range ldo6_ranges[] = {
|
||||
STPMU1_RANGE(900000, 0, 24, 100000),
|
||||
STPMU1_RANGE(3300000, 25, 31, 0),
|
||||
static const struct stpmic1_range ldo6_ranges[] = {
|
||||
STPMIC1_RANGE(900000, 0, 24, 100000),
|
||||
STPMIC1_RANGE(3300000, 25, 31, 0),
|
||||
};
|
||||
|
||||
/* LDO: 1,2,3,4,5,6 - voltage ranges */
|
||||
static const struct stpmu1_output_range ldo_voltage_range[] = {
|
||||
STPMU1_OUTPUT_RANGE(ldo12_ranges, ARRAY_SIZE(ldo12_ranges)),
|
||||
STPMU1_OUTPUT_RANGE(ldo12_ranges, ARRAY_SIZE(ldo12_ranges)),
|
||||
STPMU1_OUTPUT_RANGE(ldo3_ranges, ARRAY_SIZE(ldo3_ranges)),
|
||||
STPMU1_OUTPUT_RANGE(NULL, 0),
|
||||
STPMU1_OUTPUT_RANGE(ldo5_ranges, ARRAY_SIZE(ldo5_ranges)),
|
||||
STPMU1_OUTPUT_RANGE(ldo6_ranges, ARRAY_SIZE(ldo6_ranges)),
|
||||
static const struct stpmic1_output ldo_voltage_range[] = {
|
||||
STPMIC1_OUTPUT(ldo12_ranges, ARRAY_SIZE(ldo12_ranges)),
|
||||
STPMIC1_OUTPUT(ldo12_ranges, ARRAY_SIZE(ldo12_ranges)),
|
||||
STPMIC1_OUTPUT(ldo3_ranges, ARRAY_SIZE(ldo3_ranges)),
|
||||
STPMIC1_OUTPUT(NULL, 0),
|
||||
STPMIC1_OUTPUT(ldo5_ranges, ARRAY_SIZE(ldo5_ranges)),
|
||||
STPMIC1_OUTPUT(ldo6_ranges, ARRAY_SIZE(ldo6_ranges)),
|
||||
};
|
||||
|
||||
/* LDO modes */
|
||||
static const struct dm_regulator_mode ldo_modes[] = {
|
||||
STPMU1_MODE(STPMU1_LDO_MODE_NORMAL,
|
||||
STPMU1_LDO_MODE_NORMAL, "NORMAL"),
|
||||
STPMU1_MODE(STPMU1_LDO_MODE_BYPASS,
|
||||
STPMU1_LDO_MODE_BYPASS, "BYPASS"),
|
||||
STPMU1_MODE(STPMU1_LDO_MODE_SINK_SOURCE,
|
||||
STPMU1_LDO_MODE_SINK_SOURCE, "SINK SOURCE"),
|
||||
STPMIC1_MODE(STPMIC1_LDO_MODE_NORMAL,
|
||||
STPMIC1_LDO_MODE_NORMAL, "NORMAL"),
|
||||
STPMIC1_MODE(STPMIC1_LDO_MODE_BYPASS,
|
||||
STPMIC1_LDO_MODE_BYPASS, "BYPASS"),
|
||||
STPMIC1_MODE(STPMIC1_LDO_MODE_SINK_SOURCE,
|
||||
STPMIC1_LDO_MODE_SINK_SOURCE, "SINK SOURCE"),
|
||||
};
|
||||
|
||||
static int stpmu1_ldo_get_value(struct udevice *dev)
|
||||
static int stpmic1_ldo_get_value(struct udevice *dev)
|
||||
{
|
||||
int sel, ldo = dev->driver_data - 1;
|
||||
|
||||
sel = pmic_reg_read(dev->parent, STPMU1_LDOX_CTRL_REG(ldo));
|
||||
sel = pmic_reg_read(dev->parent, STPMIC1_LDOX_CTRL_REG(ldo));
|
||||
if (sel < 0)
|
||||
return sel;
|
||||
|
||||
/* ldo4 => 3,3V */
|
||||
if (ldo == STPMU1_LDO4)
|
||||
return STPMU1_LDO4_UV;
|
||||
if (ldo == STPMIC1_LDO4)
|
||||
return STPMIC1_LDO4_UV;
|
||||
|
||||
sel &= STPMU1_LDO12356_OUTPUT_MASK;
|
||||
sel >>= STPMU1_LDO12356_OUTPUT_SHIFT;
|
||||
sel &= STPMIC1_LDO12356_OUTPUT_MASK;
|
||||
sel >>= STPMIC1_LDO12356_OUTPUT_SHIFT;
|
||||
|
||||
/* ldo3, sel = 31 => BUCK2/2 */
|
||||
if (ldo == STPMU1_LDO3 && sel == STPMU1_LDO3_DDR_SEL)
|
||||
return stpmu1_buck_get_uv(dev->parent, STPMU1_BUCK2) / 2;
|
||||
if (ldo == STPMIC1_LDO3 && sel == STPMIC1_LDO3_DDR_SEL)
|
||||
return stpmic1_buck_get_uv(dev->parent, STPMIC1_BUCK2) / 2;
|
||||
|
||||
return stpmu1_output_find_uv(sel, &ldo_voltage_range[ldo]);
|
||||
return stpmic1_output_find_uv(sel, &ldo_voltage_range[ldo]);
|
||||
}
|
||||
|
||||
static int stpmu1_ldo_set_value(struct udevice *dev, int uv)
|
||||
static int stpmic1_ldo_set_value(struct udevice *dev, int uv)
|
||||
{
|
||||
int sel, ldo = dev->driver_data - 1;
|
||||
|
||||
/* ldo4 => not possible */
|
||||
if (ldo == STPMU1_LDO4)
|
||||
if (ldo == STPMIC1_LDO4)
|
||||
return -EINVAL;
|
||||
|
||||
sel = stpmu1_output_find_sel(uv, &ldo_voltage_range[ldo]);
|
||||
sel = stpmic1_output_find_sel(uv, &ldo_voltage_range[ldo]);
|
||||
if (sel < 0)
|
||||
return sel;
|
||||
|
||||
return pmic_clrsetbits(dev->parent,
|
||||
STPMU1_LDOX_CTRL_REG(ldo),
|
||||
STPMU1_LDO12356_OUTPUT_MASK,
|
||||
sel << STPMU1_LDO12356_OUTPUT_SHIFT);
|
||||
STPMIC1_LDOX_CTRL_REG(ldo),
|
||||
STPMIC1_LDO12356_OUTPUT_MASK,
|
||||
sel << STPMIC1_LDO12356_OUTPUT_SHIFT);
|
||||
}
|
||||
|
||||
static int stpmu1_ldo_get_enable(struct udevice *dev)
|
||||
static int stpmic1_ldo_get_enable(struct udevice *dev)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = pmic_reg_read(dev->parent,
|
||||
STPMU1_LDOX_CTRL_REG(dev->driver_data - 1));
|
||||
STPMIC1_LDOX_CTRL_REG(dev->driver_data - 1));
|
||||
if (ret < 0)
|
||||
return false;
|
||||
|
||||
return ret & STPMU1_LDO_EN ? true : false;
|
||||
return ret & STPMIC1_LDO_EN ? true : false;
|
||||
}
|
||||
|
||||
static int stpmu1_ldo_set_enable(struct udevice *dev, bool enable)
|
||||
static int stpmic1_ldo_set_enable(struct udevice *dev, bool enable)
|
||||
{
|
||||
struct dm_regulator_uclass_platdata *uc_pdata;
|
||||
int delay = enable ? STPMU1_DEFAULT_START_UP_DELAY_MS :
|
||||
STPMU1_DEFAULT_STOP_DELAY_MS;
|
||||
int delay = enable ? STPMIC1_DEFAULT_START_UP_DELAY_MS :
|
||||
STPMIC1_DEFAULT_STOP_DELAY_MS;
|
||||
int ret, uv;
|
||||
|
||||
/* if regulator is already in the wanted state, nothing to do */
|
||||
if (stpmu1_ldo_get_enable(dev) == enable)
|
||||
if (stpmic1_ldo_get_enable(dev) == enable)
|
||||
return 0;
|
||||
|
||||
if (enable) {
|
||||
uc_pdata = dev_get_uclass_platdata(dev);
|
||||
uv = stpmu1_ldo_get_value(dev);
|
||||
if ((uv < uc_pdata->min_uV) || (uv > uc_pdata->max_uV))
|
||||
stpmu1_ldo_set_value(dev, uc_pdata->min_uV);
|
||||
uv = stpmic1_ldo_get_value(dev);
|
||||
if (uv < uc_pdata->min_uV || uv > uc_pdata->max_uV)
|
||||
stpmic1_ldo_set_value(dev, uc_pdata->min_uV);
|
||||
}
|
||||
|
||||
ret = pmic_clrsetbits(dev->parent,
|
||||
STPMU1_LDOX_CTRL_REG(dev->driver_data - 1),
|
||||
STPMU1_LDO_EN, enable ? STPMU1_LDO_EN : 0);
|
||||
STPMIC1_LDOX_CTRL_REG(dev->driver_data - 1),
|
||||
STPMIC1_LDO_EN, enable ? STPMIC1_LDO_EN : 0);
|
||||
mdelay(delay);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int stpmu1_ldo_get_mode(struct udevice *dev)
|
||||
static int stpmic1_ldo_get_mode(struct udevice *dev)
|
||||
{
|
||||
int ret, ldo = dev->driver_data - 1;
|
||||
|
||||
if (ldo != STPMU1_LDO3)
|
||||
if (ldo != STPMIC1_LDO3)
|
||||
return -EINVAL;
|
||||
|
||||
ret = pmic_reg_read(dev->parent, STPMU1_LDOX_CTRL_REG(ldo));
|
||||
ret = pmic_reg_read(dev->parent, STPMIC1_LDOX_CTRL_REG(ldo));
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
if (ret & STPMU1_LDO3_MODE)
|
||||
return STPMU1_LDO_MODE_BYPASS;
|
||||
if (ret & STPMIC1_LDO3_MODE)
|
||||
return STPMIC1_LDO_MODE_BYPASS;
|
||||
|
||||
ret &= STPMU1_LDO12356_OUTPUT_MASK;
|
||||
ret >>= STPMU1_LDO12356_OUTPUT_SHIFT;
|
||||
ret &= STPMIC1_LDO12356_OUTPUT_MASK;
|
||||
ret >>= STPMIC1_LDO12356_OUTPUT_SHIFT;
|
||||
|
||||
return ret == STPMU1_LDO3_DDR_SEL ? STPMU1_LDO_MODE_SINK_SOURCE :
|
||||
STPMU1_LDO_MODE_NORMAL;
|
||||
return ret == STPMIC1_LDO3_DDR_SEL ? STPMIC1_LDO_MODE_SINK_SOURCE :
|
||||
STPMIC1_LDO_MODE_NORMAL;
|
||||
}
|
||||
|
||||
static int stpmu1_ldo_set_mode(struct udevice *dev, int mode)
|
||||
static int stpmic1_ldo_set_mode(struct udevice *dev, int mode)
|
||||
{
|
||||
int ret, ldo = dev->driver_data - 1;
|
||||
|
||||
if (ldo != STPMU1_LDO3)
|
||||
if (ldo != STPMIC1_LDO3)
|
||||
return -EINVAL;
|
||||
|
||||
ret = pmic_reg_read(dev->parent, STPMU1_LDOX_CTRL_REG(ldo));
|
||||
ret = pmic_reg_read(dev->parent, STPMIC1_LDOX_CTRL_REG(ldo));
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
switch (mode) {
|
||||
case STPMU1_LDO_MODE_SINK_SOURCE:
|
||||
ret &= ~STPMU1_LDO12356_OUTPUT_MASK;
|
||||
ret |= STPMU1_LDO3_DDR_SEL << STPMU1_LDO12356_OUTPUT_SHIFT;
|
||||
case STPMU1_LDO_MODE_NORMAL:
|
||||
ret &= ~STPMU1_LDO3_MODE;
|
||||
case STPMIC1_LDO_MODE_SINK_SOURCE:
|
||||
ret &= ~STPMIC1_LDO12356_OUTPUT_MASK;
|
||||
ret |= STPMIC1_LDO3_DDR_SEL << STPMIC1_LDO12356_OUTPUT_SHIFT;
|
||||
case STPMIC1_LDO_MODE_NORMAL:
|
||||
ret &= ~STPMIC1_LDO3_MODE;
|
||||
break;
|
||||
case STPMU1_LDO_MODE_BYPASS:
|
||||
ret |= STPMU1_LDO3_MODE;
|
||||
case STPMIC1_LDO_MODE_BYPASS:
|
||||
ret |= STPMIC1_LDO3_MODE;
|
||||
break;
|
||||
}
|
||||
|
||||
return pmic_reg_write(dev->parent, STPMU1_LDOX_CTRL_REG(ldo), ret);
|
||||
return pmic_reg_write(dev->parent, STPMIC1_LDOX_CTRL_REG(ldo), ret);
|
||||
}
|
||||
|
||||
static int stpmu1_ldo_probe(struct udevice *dev)
|
||||
static int stpmic1_ldo_probe(struct udevice *dev)
|
||||
{
|
||||
struct dm_regulator_uclass_platdata *uc_pdata;
|
||||
|
||||
if (!dev->driver_data || dev->driver_data > STPMU1_MAX_LDO)
|
||||
if (!dev->driver_data || dev->driver_data > STPMIC1_MAX_LDO)
|
||||
return -EINVAL;
|
||||
|
||||
uc_pdata = dev_get_uclass_platdata(dev);
|
||||
|
||||
uc_pdata->type = REGULATOR_TYPE_LDO;
|
||||
if (dev->driver_data - 1 == STPMU1_LDO3) {
|
||||
if (dev->driver_data - 1 == STPMIC1_LDO3) {
|
||||
uc_pdata->mode = (struct dm_regulator_mode *)ldo_modes;
|
||||
uc_pdata->mode_count = ARRAY_SIZE(ldo_modes);
|
||||
} else {
|
||||
|
|
@ -453,61 +453,61 @@ static int stpmu1_ldo_probe(struct udevice *dev)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static const struct dm_regulator_ops stpmu1_ldo_ops = {
|
||||
.get_value = stpmu1_ldo_get_value,
|
||||
.set_value = stpmu1_ldo_set_value,
|
||||
.get_enable = stpmu1_ldo_get_enable,
|
||||
.set_enable = stpmu1_ldo_set_enable,
|
||||
.get_mode = stpmu1_ldo_get_mode,
|
||||
.set_mode = stpmu1_ldo_set_mode,
|
||||
static const struct dm_regulator_ops stpmic1_ldo_ops = {
|
||||
.get_value = stpmic1_ldo_get_value,
|
||||
.set_value = stpmic1_ldo_set_value,
|
||||
.get_enable = stpmic1_ldo_get_enable,
|
||||
.set_enable = stpmic1_ldo_set_enable,
|
||||
.get_mode = stpmic1_ldo_get_mode,
|
||||
.set_mode = stpmic1_ldo_set_mode,
|
||||
};
|
||||
|
||||
U_BOOT_DRIVER(stpmu1_ldo) = {
|
||||
.name = "stpmu1_ldo",
|
||||
U_BOOT_DRIVER(stpmic1_ldo) = {
|
||||
.name = "stpmic1_ldo",
|
||||
.id = UCLASS_REGULATOR,
|
||||
.ops = &stpmu1_ldo_ops,
|
||||
.probe = stpmu1_ldo_probe,
|
||||
.ops = &stpmic1_ldo_ops,
|
||||
.probe = stpmic1_ldo_probe,
|
||||
};
|
||||
|
||||
/*
|
||||
* VREF DDR regulator
|
||||
*/
|
||||
|
||||
static int stpmu1_vref_ddr_get_value(struct udevice *dev)
|
||||
static int stpmic1_vref_ddr_get_value(struct udevice *dev)
|
||||
{
|
||||
/* BUCK2/2 */
|
||||
return stpmu1_buck_get_uv(dev->parent, STPMU1_BUCK2) / 2;
|
||||
return stpmic1_buck_get_uv(dev->parent, STPMIC1_BUCK2) / 2;
|
||||
}
|
||||
|
||||
static int stpmu1_vref_ddr_get_enable(struct udevice *dev)
|
||||
static int stpmic1_vref_ddr_get_enable(struct udevice *dev)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = pmic_reg_read(dev->parent, STPMU1_VREF_CTRL_REG);
|
||||
ret = pmic_reg_read(dev->parent, STPMIC1_VREF_CTRL_REG);
|
||||
if (ret < 0)
|
||||
return false;
|
||||
|
||||
return ret & STPMU1_VREF_EN ? true : false;
|
||||
return ret & STPMIC1_VREF_EN ? true : false;
|
||||
}
|
||||
|
||||
static int stpmu1_vref_ddr_set_enable(struct udevice *dev, bool enable)
|
||||
static int stpmic1_vref_ddr_set_enable(struct udevice *dev, bool enable)
|
||||
{
|
||||
int delay = enable ? STPMU1_DEFAULT_START_UP_DELAY_MS :
|
||||
STPMU1_DEFAULT_STOP_DELAY_MS;
|
||||
int delay = enable ? STPMIC1_DEFAULT_START_UP_DELAY_MS :
|
||||
STPMIC1_DEFAULT_STOP_DELAY_MS;
|
||||
int ret;
|
||||
|
||||
/* if regulator is already in the wanted state, nothing to do */
|
||||
if (stpmu1_vref_ddr_get_enable(dev) == enable)
|
||||
if (stpmic1_vref_ddr_get_enable(dev) == enable)
|
||||
return 0;
|
||||
|
||||
ret = pmic_clrsetbits(dev->parent, STPMU1_VREF_CTRL_REG,
|
||||
STPMU1_VREF_EN, enable ? STPMU1_VREF_EN : 0);
|
||||
ret = pmic_clrsetbits(dev->parent, STPMIC1_VREF_CTRL_REG,
|
||||
STPMIC1_VREF_EN, enable ? STPMIC1_VREF_EN : 0);
|
||||
mdelay(delay);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int stpmu1_vref_ddr_probe(struct udevice *dev)
|
||||
static int stpmic1_vref_ddr_probe(struct udevice *dev)
|
||||
{
|
||||
struct dm_regulator_uclass_platdata *uc_pdata;
|
||||
|
||||
|
|
@ -519,59 +519,59 @@ static int stpmu1_vref_ddr_probe(struct udevice *dev)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static const struct dm_regulator_ops stpmu1_vref_ddr_ops = {
|
||||
.get_value = stpmu1_vref_ddr_get_value,
|
||||
.get_enable = stpmu1_vref_ddr_get_enable,
|
||||
.set_enable = stpmu1_vref_ddr_set_enable,
|
||||
static const struct dm_regulator_ops stpmic1_vref_ddr_ops = {
|
||||
.get_value = stpmic1_vref_ddr_get_value,
|
||||
.get_enable = stpmic1_vref_ddr_get_enable,
|
||||
.set_enable = stpmic1_vref_ddr_set_enable,
|
||||
};
|
||||
|
||||
U_BOOT_DRIVER(stpmu1_vref_ddr) = {
|
||||
.name = "stpmu1_vref_ddr",
|
||||
U_BOOT_DRIVER(stpmic1_vref_ddr) = {
|
||||
.name = "stpmic1_vref_ddr",
|
||||
.id = UCLASS_REGULATOR,
|
||||
.ops = &stpmu1_vref_ddr_ops,
|
||||
.probe = stpmu1_vref_ddr_probe,
|
||||
.ops = &stpmic1_vref_ddr_ops,
|
||||
.probe = stpmic1_vref_ddr_probe,
|
||||
};
|
||||
|
||||
/*
|
||||
* BOOST regulator
|
||||
*/
|
||||
|
||||
static int stpmu1_boost_get_enable(struct udevice *dev)
|
||||
static int stpmic1_boost_get_enable(struct udevice *dev)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = pmic_reg_read(dev->parent, STPMU1_USB_CTRL_REG);
|
||||
ret = pmic_reg_read(dev->parent, STPMIC1_USB_CTRL_REG);
|
||||
if (ret < 0)
|
||||
return false;
|
||||
|
||||
return ret & STPMU1_USB_BOOST_EN ? true : false;
|
||||
return ret & STPMIC1_USB_BOOST_EN ? true : false;
|
||||
}
|
||||
|
||||
static int stpmu1_boost_set_enable(struct udevice *dev, bool enable)
|
||||
static int stpmic1_boost_set_enable(struct udevice *dev, bool enable)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = pmic_reg_read(dev->parent, STPMU1_USB_CTRL_REG);
|
||||
ret = pmic_reg_read(dev->parent, STPMIC1_USB_CTRL_REG);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
if (!enable && ret & STPMU1_USB_PWR_SW_EN)
|
||||
if (!enable && ret & STPMIC1_USB_PWR_SW_EN)
|
||||
return -EINVAL;
|
||||
|
||||
/* if regulator is already in the wanted state, nothing to do */
|
||||
if (!!(ret & STPMU1_USB_BOOST_EN) == enable)
|
||||
if (!!(ret & STPMIC1_USB_BOOST_EN) == enable)
|
||||
return 0;
|
||||
|
||||
ret = pmic_clrsetbits(dev->parent, STPMU1_USB_CTRL_REG,
|
||||
STPMU1_USB_BOOST_EN,
|
||||
enable ? STPMU1_USB_BOOST_EN : 0);
|
||||
ret = pmic_clrsetbits(dev->parent, STPMIC1_USB_CTRL_REG,
|
||||
STPMIC1_USB_BOOST_EN,
|
||||
enable ? STPMIC1_USB_BOOST_EN : 0);
|
||||
if (enable)
|
||||
mdelay(STPMU1_USB_BOOST_START_UP_DELAY_MS);
|
||||
mdelay(STPMIC1_USB_BOOST_START_UP_DELAY_MS);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int stpmu1_boost_probe(struct udevice *dev)
|
||||
static int stpmic1_boost_probe(struct udevice *dev)
|
||||
{
|
||||
struct dm_regulator_uclass_platdata *uc_pdata;
|
||||
|
||||
|
|
@ -583,42 +583,42 @@ static int stpmu1_boost_probe(struct udevice *dev)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static const struct dm_regulator_ops stpmu1_boost_ops = {
|
||||
.get_enable = stpmu1_boost_get_enable,
|
||||
.set_enable = stpmu1_boost_set_enable,
|
||||
static const struct dm_regulator_ops stpmic1_boost_ops = {
|
||||
.get_enable = stpmic1_boost_get_enable,
|
||||
.set_enable = stpmic1_boost_set_enable,
|
||||
};
|
||||
|
||||
U_BOOT_DRIVER(stpmu1_boost) = {
|
||||
.name = "stpmu1_boost",
|
||||
U_BOOT_DRIVER(stpmic1_boost) = {
|
||||
.name = "stpmic1_boost",
|
||||
.id = UCLASS_REGULATOR,
|
||||
.ops = &stpmu1_boost_ops,
|
||||
.probe = stpmu1_boost_probe,
|
||||
.ops = &stpmic1_boost_ops,
|
||||
.probe = stpmic1_boost_probe,
|
||||
};
|
||||
|
||||
/*
|
||||
* USB power switch
|
||||
*/
|
||||
|
||||
static int stpmu1_pwr_sw_get_enable(struct udevice *dev)
|
||||
static int stpmic1_pwr_sw_get_enable(struct udevice *dev)
|
||||
{
|
||||
uint mask = 1 << dev->driver_data;
|
||||
int ret;
|
||||
|
||||
ret = pmic_reg_read(dev->parent, STPMU1_USB_CTRL_REG);
|
||||
ret = pmic_reg_read(dev->parent, STPMIC1_USB_CTRL_REG);
|
||||
if (ret < 0)
|
||||
return false;
|
||||
|
||||
return ret & mask ? true : false;
|
||||
}
|
||||
|
||||
static int stpmu1_pwr_sw_set_enable(struct udevice *dev, bool enable)
|
||||
static int stpmic1_pwr_sw_set_enable(struct udevice *dev, bool enable)
|
||||
{
|
||||
uint mask = 1 << dev->driver_data;
|
||||
int delay = enable ? STPMU1_DEFAULT_START_UP_DELAY_MS :
|
||||
STPMU1_DEFAULT_STOP_DELAY_MS;
|
||||
int delay = enable ? STPMIC1_DEFAULT_START_UP_DELAY_MS :
|
||||
STPMIC1_DEFAULT_STOP_DELAY_MS;
|
||||
int ret;
|
||||
|
||||
ret = pmic_reg_read(dev->parent, STPMU1_USB_CTRL_REG);
|
||||
ret = pmic_reg_read(dev->parent, STPMIC1_USB_CTRL_REG);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
|
|
@ -627,28 +627,28 @@ static int stpmu1_pwr_sw_set_enable(struct udevice *dev, bool enable)
|
|||
return 0;
|
||||
|
||||
/* Boost management */
|
||||
if (enable && !(ret & STPMU1_USB_BOOST_EN)) {
|
||||
pmic_clrsetbits(dev->parent, STPMU1_USB_CTRL_REG,
|
||||
STPMU1_USB_BOOST_EN, STPMU1_USB_BOOST_EN);
|
||||
mdelay(STPMU1_USB_BOOST_START_UP_DELAY_MS);
|
||||
} else if (!enable && ret & STPMU1_USB_BOOST_EN &&
|
||||
(ret & STPMU1_USB_PWR_SW_EN) != STPMU1_USB_PWR_SW_EN) {
|
||||
pmic_clrsetbits(dev->parent, STPMU1_USB_CTRL_REG,
|
||||
STPMU1_USB_BOOST_EN, 0);
|
||||
if (enable && !(ret & STPMIC1_USB_BOOST_EN)) {
|
||||
pmic_clrsetbits(dev->parent, STPMIC1_USB_CTRL_REG,
|
||||
STPMIC1_USB_BOOST_EN, STPMIC1_USB_BOOST_EN);
|
||||
mdelay(STPMIC1_USB_BOOST_START_UP_DELAY_MS);
|
||||
} else if (!enable && ret & STPMIC1_USB_BOOST_EN &&
|
||||
(ret & STPMIC1_USB_PWR_SW_EN) != STPMIC1_USB_PWR_SW_EN) {
|
||||
pmic_clrsetbits(dev->parent, STPMIC1_USB_CTRL_REG,
|
||||
STPMIC1_USB_BOOST_EN, 0);
|
||||
}
|
||||
|
||||
ret = pmic_clrsetbits(dev->parent, STPMU1_USB_CTRL_REG,
|
||||
ret = pmic_clrsetbits(dev->parent, STPMIC1_USB_CTRL_REG,
|
||||
mask, enable ? mask : 0);
|
||||
mdelay(delay);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int stpmu1_pwr_sw_probe(struct udevice *dev)
|
||||
static int stpmic1_pwr_sw_probe(struct udevice *dev)
|
||||
{
|
||||
struct dm_regulator_uclass_platdata *uc_pdata;
|
||||
|
||||
if (!dev->driver_data || dev->driver_data > STPMU1_MAX_PWR_SW)
|
||||
if (!dev->driver_data || dev->driver_data > STPMIC1_MAX_PWR_SW)
|
||||
return -EINVAL;
|
||||
|
||||
uc_pdata = dev_get_uclass_platdata(dev);
|
||||
|
|
@ -659,14 +659,14 @@ static int stpmu1_pwr_sw_probe(struct udevice *dev)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static const struct dm_regulator_ops stpmu1_pwr_sw_ops = {
|
||||
.get_enable = stpmu1_pwr_sw_get_enable,
|
||||
.set_enable = stpmu1_pwr_sw_set_enable,
|
||||
static const struct dm_regulator_ops stpmic1_pwr_sw_ops = {
|
||||
.get_enable = stpmic1_pwr_sw_get_enable,
|
||||
.set_enable = stpmic1_pwr_sw_set_enable,
|
||||
};
|
||||
|
||||
U_BOOT_DRIVER(stpmu1_pwr_sw) = {
|
||||
.name = "stpmu1_pwr_sw",
|
||||
U_BOOT_DRIVER(stpmic1_pwr_sw) = {
|
||||
.name = "stpmic1_pwr_sw",
|
||||
.id = UCLASS_REGULATOR,
|
||||
.ops = &stpmu1_pwr_sw_ops,
|
||||
.probe = stpmu1_pwr_sw_probe,
|
||||
.ops = &stpmic1_pwr_sw_ops,
|
||||
.probe = stpmic1_pwr_sw_probe,
|
||||
};
|
||||
|
|
|
|||
|
|
@ -1,60 +1,46 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0 */
|
||||
/*
|
||||
* This file is part of stpmu1 pmic driver
|
||||
*
|
||||
* Copyright (C) 2017, STMicroelectronics - All Rights Reserved
|
||||
* Author: Pascal Paillet <p.paillet@st.com> for STMicroelectronics.
|
||||
*
|
||||
* License type: GPLv2
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published by
|
||||
* the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful, but
|
||||
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
||||
* or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
* See the GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along with
|
||||
* this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
* Copyright (C) STMicroelectronics 2018 - All Rights Reserved
|
||||
* Author: Philippe Peurichard <philippe.peurichard@st.com>,
|
||||
* Pascal Paillet <p.paillet@st.com> for STMicroelectronics.
|
||||
*/
|
||||
|
||||
#ifndef __DT_BINDINGS_STPMU1_H__
|
||||
#define __DT_BINDINGS_STPMU1_H__
|
||||
#ifndef __DT_BINDINGS_STPMIC1_H__
|
||||
#define __DT_BINDINGS_STPMIC1_H__
|
||||
|
||||
/* IRQ definitions */
|
||||
#define IT_PONKEY_F 0
|
||||
#define IT_PONKEY_R 1
|
||||
#define IT_WAKEUP_F 2
|
||||
#define IT_WAKEUP_R 3
|
||||
#define IT_VBUS_OTG_F 4
|
||||
#define IT_VBUS_OTG_R 5
|
||||
#define IT_SWOUT_F 6
|
||||
#define IT_SWOUT_R 7
|
||||
#define IT_PONKEY_F 0
|
||||
#define IT_PONKEY_R 1
|
||||
#define IT_WAKEUP_F 2
|
||||
#define IT_WAKEUP_R 3
|
||||
#define IT_VBUS_OTG_F 4
|
||||
#define IT_VBUS_OTG_R 5
|
||||
#define IT_SWOUT_F 6
|
||||
#define IT_SWOUT_R 7
|
||||
|
||||
#define IT_CURLIM_BUCK1 8
|
||||
#define IT_CURLIM_BUCK2 9
|
||||
#define IT_CURLIM_BUCK3 10
|
||||
#define IT_CURLIM_BUCK4 11
|
||||
#define IT_OCP_OTG 12
|
||||
#define IT_OCP_SWOUT 13
|
||||
#define IT_OCP_BOOST 14
|
||||
#define IT_OVP_BOOST 15
|
||||
#define IT_CURLIM_BUCK1 8
|
||||
#define IT_CURLIM_BUCK2 9
|
||||
#define IT_CURLIM_BUCK3 10
|
||||
#define IT_CURLIM_BUCK4 11
|
||||
#define IT_OCP_OTG 12
|
||||
#define IT_OCP_SWOUT 13
|
||||
#define IT_OCP_BOOST 14
|
||||
#define IT_OVP_BOOST 15
|
||||
|
||||
#define IT_CURLIM_LDO1 16
|
||||
#define IT_CURLIM_LDO2 17
|
||||
#define IT_CURLIM_LDO3 18
|
||||
#define IT_CURLIM_LDO4 19
|
||||
#define IT_CURLIM_LDO5 20
|
||||
#define IT_CURLIM_LDO6 21
|
||||
#define IT_SHORT_SWOTG 22
|
||||
#define IT_SHORT_SWOUT 23
|
||||
#define IT_CURLIM_LDO1 16
|
||||
#define IT_CURLIM_LDO2 17
|
||||
#define IT_CURLIM_LDO3 18
|
||||
#define IT_CURLIM_LDO4 19
|
||||
#define IT_CURLIM_LDO5 20
|
||||
#define IT_CURLIM_LDO6 21
|
||||
#define IT_SHORT_SWOTG 22
|
||||
#define IT_SHORT_SWOUT 23
|
||||
|
||||
#define IT_TWARN_F 24
|
||||
#define IT_TWARN_R 25
|
||||
#define IT_VINLOW_F 26
|
||||
#define IT_VINLOW_R 27
|
||||
#define IT_SWIN_F 30
|
||||
#define IT_SWIN_R 31
|
||||
#define IT_TWARN_F 24
|
||||
#define IT_TWARN_R 25
|
||||
#define IT_VINLOW_F 26
|
||||
#define IT_VINLOW_R 27
|
||||
#define IT_SWIN_F 30
|
||||
#define IT_SWIN_R 31
|
||||
|
||||
#endif /* __DT_BINDINGS_STPMU1_H__ */
|
||||
#endif /* __DT_BINDINGS_STPMIC1_H__ */
|
||||
|
|
|
|||
|
|
@ -3,83 +3,90 @@
|
|||
* Copyright (C) 2018, STMicroelectronics - All Rights Reserved
|
||||
*/
|
||||
|
||||
#ifndef __PMIC_STPMU1_H_
|
||||
#define __PMIC_STPMU1_H_
|
||||
#ifndef __PMIC_STPMIC1_H_
|
||||
#define __PMIC_STPMIC1_H_
|
||||
|
||||
#define STPMU1_MASK_RESET_BUCK 0x18
|
||||
#define STPMU1_BUCKX_CTRL_REG(buck) (0x20 + (buck))
|
||||
#define STPMU1_VREF_CTRL_REG 0x24
|
||||
#define STPMU1_LDOX_CTRL_REG(ldo) (0x25 + (ldo))
|
||||
#define STPMU1_USB_CTRL_REG 0x40
|
||||
#define STPMU1_NVM_USER_STATUS_REG 0xb8
|
||||
#define STPMU1_NVM_USER_CONTROL_REG 0xb9
|
||||
#define STPMIC1_MAIN_CONTROL_REG 0x10
|
||||
#define STPMIC1_MASK_RESET_BUCK 0x18
|
||||
#define STPMIC1_MASK_RESET_LDOS 0x1a
|
||||
#define STPMIC1_BUCKX_CTRL_REG(buck) (0x20 + (buck))
|
||||
#define STPMIC1_VREF_CTRL_REG 0x24
|
||||
#define STPMIC1_LDOX_CTRL_REG(ldo) (0x25 + (ldo))
|
||||
#define STPMIC1_USB_CTRL_REG 0x40
|
||||
#define STPMIC1_NVM_USER_STATUS_REG 0xb8
|
||||
#define STPMIC1_NVM_USER_CONTROL_REG 0xb9
|
||||
|
||||
#define STPMU1_MASK_RESET_BUCK3 BIT(2)
|
||||
/* Main PMIC Control Register (MAIN_CONTROL_REG) */
|
||||
#define STPMIC1_CTRL_SWITCH_OFF BIT(0)
|
||||
#define STPMIC1_CTRL_RESTART BIT(1)
|
||||
|
||||
#define STPMU1_BUCK_EN BIT(0)
|
||||
#define STPMU1_BUCK_MODE BIT(1)
|
||||
#define STPMU1_BUCK_OUTPUT_MASK GENMASK(7, 2)
|
||||
#define STPMU1_BUCK_OUTPUT_SHIFT 2
|
||||
#define STPMU1_BUCK2_1200000V (24 << STPMU1_BUCK_OUTPUT_SHIFT)
|
||||
#define STPMU1_BUCK2_1350000V (30 << STPMU1_BUCK_OUTPUT_SHIFT)
|
||||
#define STPMU1_BUCK3_1800000V (39 << STPMU1_BUCK_OUTPUT_SHIFT)
|
||||
#define STPMIC1_MASK_RESET_BUCK3 BIT(2)
|
||||
#define STPMIC1_MASK_RESET_BUCK_DBG GENMASK(3, 0)
|
||||
#define STPMIC1_MASK_RESET_LDOS_DBG 0x6F
|
||||
|
||||
#define STPMU1_VREF_EN BIT(0)
|
||||
#define STPMIC1_BUCK_EN BIT(0)
|
||||
#define STPMIC1_BUCK_MODE BIT(1)
|
||||
#define STPMIC1_BUCK_OUTPUT_MASK GENMASK(7, 2)
|
||||
#define STPMIC1_BUCK_OUTPUT_SHIFT 2
|
||||
#define STPMIC1_BUCK2_1200000V (24 << STPMIC1_BUCK_OUTPUT_SHIFT)
|
||||
#define STPMIC1_BUCK2_1350000V (30 << STPMIC1_BUCK_OUTPUT_SHIFT)
|
||||
#define STPMIC1_BUCK3_1800000V (39 << STPMIC1_BUCK_OUTPUT_SHIFT)
|
||||
|
||||
#define STPMU1_LDO_EN BIT(0)
|
||||
#define STPMU1_LDO12356_OUTPUT_MASK GENMASK(6, 2)
|
||||
#define STPMU1_LDO12356_OUTPUT_SHIFT 2
|
||||
#define STPMU1_LDO3_MODE BIT(7)
|
||||
#define STPMU1_LDO3_DDR_SEL 31
|
||||
#define STPMU1_LDO3_1800000 (9 << STPMU1_LDO12356_OUTPUT_SHIFT)
|
||||
#define STPMU1_LDO4_UV 3300000
|
||||
#define STPMIC1_VREF_EN BIT(0)
|
||||
|
||||
#define STPMU1_USB_BOOST_EN BIT(0)
|
||||
#define STPMU1_USB_PWR_SW_EN GENMASK(2, 1)
|
||||
#define STPMIC1_LDO_EN BIT(0)
|
||||
#define STPMIC1_LDO12356_OUTPUT_MASK GENMASK(6, 2)
|
||||
#define STPMIC1_LDO12356_OUTPUT_SHIFT 2
|
||||
#define STPMIC1_LDO3_MODE BIT(7)
|
||||
#define STPMIC1_LDO3_DDR_SEL 31
|
||||
#define STPMIC1_LDO3_1800000 (9 << STPMIC1_LDO12356_OUTPUT_SHIFT)
|
||||
#define STPMIC1_LDO4_UV 3300000
|
||||
|
||||
#define STPMU1_NVM_USER_CONTROL_PROGRAM BIT(0)
|
||||
#define STPMU1_NVM_USER_CONTROL_READ BIT(1)
|
||||
#define STPMIC1_USB_BOOST_EN BIT(0)
|
||||
#define STPMIC1_USB_PWR_SW_EN GENMASK(2, 1)
|
||||
|
||||
#define STPMU1_NVM_USER_STATUS_BUSY BIT(0)
|
||||
#define STPMU1_NVM_USER_STATUS_ERROR BIT(1)
|
||||
#define STPMIC1_NVM_USER_CONTROL_PROGRAM BIT(0)
|
||||
#define STPMIC1_NVM_USER_CONTROL_READ BIT(1)
|
||||
|
||||
#define STPMU1_DEFAULT_START_UP_DELAY_MS 1
|
||||
#define STPMU1_DEFAULT_STOP_DELAY_MS 5
|
||||
#define STPMU1_USB_BOOST_START_UP_DELAY_MS 10
|
||||
#define STPMIC1_NVM_USER_STATUS_BUSY BIT(0)
|
||||
#define STPMIC1_NVM_USER_STATUS_ERROR BIT(1)
|
||||
|
||||
#define STPMIC1_DEFAULT_START_UP_DELAY_MS 1
|
||||
#define STPMIC1_DEFAULT_STOP_DELAY_MS 5
|
||||
#define STPMIC1_USB_BOOST_START_UP_DELAY_MS 10
|
||||
|
||||
enum {
|
||||
STPMU1_BUCK1,
|
||||
STPMU1_BUCK2,
|
||||
STPMU1_BUCK3,
|
||||
STPMU1_BUCK4,
|
||||
STPMU1_MAX_BUCK,
|
||||
STPMIC1_BUCK1,
|
||||
STPMIC1_BUCK2,
|
||||
STPMIC1_BUCK3,
|
||||
STPMIC1_BUCK4,
|
||||
STPMIC1_MAX_BUCK,
|
||||
};
|
||||
|
||||
enum {
|
||||
STPMU1_BUCK_MODE_HP,
|
||||
STPMU1_BUCK_MODE_LP,
|
||||
STPMIC1_BUCK_MODE_HP,
|
||||
STPMIC1_BUCK_MODE_LP,
|
||||
};
|
||||
|
||||
enum {
|
||||
STPMU1_LDO1,
|
||||
STPMU1_LDO2,
|
||||
STPMU1_LDO3,
|
||||
STPMU1_LDO4,
|
||||
STPMU1_LDO5,
|
||||
STPMU1_LDO6,
|
||||
STPMU1_MAX_LDO,
|
||||
STPMIC1_LDO1,
|
||||
STPMIC1_LDO2,
|
||||
STPMIC1_LDO3,
|
||||
STPMIC1_LDO4,
|
||||
STPMIC1_LDO5,
|
||||
STPMIC1_LDO6,
|
||||
STPMIC1_MAX_LDO,
|
||||
};
|
||||
|
||||
enum {
|
||||
STPMU1_LDO_MODE_NORMAL,
|
||||
STPMU1_LDO_MODE_BYPASS,
|
||||
STPMU1_LDO_MODE_SINK_SOURCE,
|
||||
STPMIC1_LDO_MODE_NORMAL,
|
||||
STPMIC1_LDO_MODE_BYPASS,
|
||||
STPMIC1_LDO_MODE_SINK_SOURCE,
|
||||
};
|
||||
|
||||
enum {
|
||||
STPMU1_PWR_SW1,
|
||||
STPMU1_PWR_SW2,
|
||||
STPMU1_MAX_PWR_SW,
|
||||
STPMIC1_PWR_SW1,
|
||||
STPMIC1_PWR_SW2,
|
||||
STPMIC1_MAX_PWR_SW,
|
||||
};
|
||||
|
||||
#endif
|
||||
|
|
|
|||
Loading…
Reference in New Issue