Commit Graph

17217 Commits

Author SHA1 Message Date
Peng Fan
fc8657b7fb thermal: imx_tmu: Add support for thermal sensor on iMX8MM
The analog sensors on iMX8MM are new, used for 14LPP process. So the
Temperature Sensor Monitoring Unit (TMU) has some change accordingly.
We use version 2 in TMU driver to represent the new TMU, so the one
driver can service for both i.MX8MQ/M.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Peng Fan
2cd7f47983 thermal: Add thermal driver for i.MX8M
The driver is ported form Linux Kernel and support driver model.
Users need to provide the tmu node and sensors nodes in DTB.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Ye Li
6039d669f4 thermal: imx_scu_thermal: Update driver for i.MX8QM thermal sensor
Add iMX8QM thermal compatible string and its driver data.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Ye Li
580fab4a82 eQos: Implement the read_rom_hwaddr callback
Implement the read_rom_hwaddr callback to load MAC address from fuse
for imx8m platforms.

Reviewed-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Ye Li
9d4194f179 fec: Move imx_get_mac_from_fuse declare to imx file
imx_get_mac_from_fuse is used to load MAC address from fuse. On imx8mp,
we have two different ENET controllers and both need to call this
function. So decouple its declare from fec driver.

Reviewed-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Fugang Duan
0e9d23945c net: eqos: implement callbaks to get interface and set txclk rate
Implement the callbacks to get phy mode interface and txclk
rate configuration.

Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Fugang Duan
3a97da12ee net: dwc_eth_qos: add dwc eqos for imx support
Add dwc eqos for imx support.

Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:10 +02:00
Fugang Duan
e32e4d0f58 net: phy: realtek: add rx delay support for RTL8211F
Add RX delay enable support for RTL8211F PHY.

Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 13:25:02 +02:00
Ye Li
6a895d039b net: Update eQos driver and FEC driver to use eth phy interfaces
Update eQoS and fec ethernet drivers to support shared MDIO framework

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 13:24:54 +02:00
Ye Li
5fe419ef2a net: Add eth phy generic driver for shared MDIO
For dual ethernet controllers, the HW design may connect ETH phys to
one MDIO ports. So two different ethernet drivers have to share MDIO bus.
Since two ethernet drivers are independent, we can't ensure their probe
order.

To resolve this problem, introduce an eth phy generic driver and uclass.

After eth-uclass binds, we search the mdio node and binds the phy node
with the eth-phy-generic driver.

When one eth driver get its phy device, the parent of phy device will
probe prior than phy device. So this ensure the eth driver ownes the
MDIO bus will be probed before using its MDIO.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 13:24:48 +02:00
Ye Li
a6979f78bc pinctrl: nxp: scu: Check the pad partition before set pinmux
If a pad is not owned by current partition we should not set its
pinmux.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 13:24:23 +02:00
Peng Fan
3b26d527d3 net: fec: add fuse check
Add fuse check for fec. If the fuse indicates the module
will not work in the SoC, let's fail the initialization.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2020-05-10 13:21:34 +02:00
Peng Fan
0bd3d911df usb: mx6: add fuse check
Add fuse check for USB. If the fuse indicates the module
will not work in the SoC, let's fail the initialization.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 13:21:27 +02:00
Peng Fan
7d1ee741d1 i2c: mxc: add fuse check
Add fuse check for I2C. If the fuse indicates the module
will not work in the SoC, let's fail the initialization.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 13:21:20 +02:00
Stefano Babic
b77d0292ca Merge branch 'master' of git://git.denx.de/u-boot 2020-05-10 13:03:56 +02:00
Murali Karicheri
39821d58c9 net: ethernet: ti: am65-cpsw-nuss: enable 10Mbps link speed in rgmii mode
In RGMII mode the 10Mbps link speed is supported only when CPSW2G MAC SL is
configured for External Control ("in band") mode
CPSW_PN_MAC_CONTROL_REG.CTL_EN(18) = 1

Hence update am65_cpsw_update_link() to follow documentation.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
2020-05-09 19:58:58 +05:30
Ye Li
6b6c620c82 sata: dwc_ahsata: Fix memory issue in reset_sata
The reset_sata should reset the sata device info and free the
probe_ent memory. Otherwise, it will cause memory leak if we
init the sata again.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-08 18:29:10 -04:00
Ye Li
cdff6fba32 sata: dwc_ahsata: Fix incorrect free
Fix coverity issue CID 43665: Free of address-of expression (BAD_FREE)
incorrect_free: free frees incorrect pointer pp.

pp points the port array field of struct ahci_uc_priv, should not free it.

Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-08 18:29:05 -04:00
Ye Li
87e2cb530f sata: ahsata: Fix wrong operand for checking SERR DIAG_X
Fix coverity issue CID 3261683: Wrong operator used
(CONSTANT_EXPRESSION_RESULT) operator_confusion:
({...; __v;}) | 67108864 is always 1/true regardless of the values
of its operand. This occurs as the logical operand of !

When DIAG_X is set, the PHY COMINIT signal is detected, so
should use '&' to check whether it is set.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-08 18:29:03 -04:00
Ye Li
bf38cbf9a2 sata: ahsata: Fix resource leak
Fix coverity issue CID 3606684: Resource leak (RESOURCE_LEAK)
leaked_storage: Variable uc_priv going out of scope leaks the storage it points to

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-08 18:29:00 -04:00
Patrick Delaunay
c39e19a9b0 configs: migrate CONFIG_SYS_MTDPARTS_RUNTIME to defconfigs
Move CONFIG_SYS_MTDPARTS_RUNTIME into Kconfig done by moveconfig.py.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-08 09:16:26 -04:00
Patrick Delaunay
8cc28146f5 configs: migrate CONFIG_SET_DFU_ALT_INFO to defconfigs
Move CONFIG_SET_DFU_ALT_INFO into Kconfig done by moveconfig.py.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-05-08 09:16:26 -04:00
Michael Walle
8737c65fe4 phy: atheros: consolidate {ar8031|ar8035}_config()
The two functions are now exactly the same, remove one of them.

Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2020-05-07 11:05:01 -04:00
Michael Walle
6333cbb381 phy: atheros: ar8035: remove static clock config
We can configure the clock output in the device tree. Disable the
hardcoded one in here. This is highly board-specific and should have
never been enabled in the PHY driver.

If bisecting shows that this commit breaks your board it probably
depends on the clock output of your Atheros AR8035 PHY. Please have a
look at doc/device-tree-bindings/net/phy/atheros.txt. You need to set
"clk-out-frequency = <125000000>" because that value was the hardcoded
value until this commit.

Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2020-05-07 11:05:01 -04:00
Michael Walle
fe6293a809 phy: atheros: add device tree bindings and config
Add support for configuring the CLK_25M pin as well as the RGMII I/O
voltage by the device tree.

By default the AT803x PHYs outputs the 25MHz clock of the XTAL input.
But this output can also be changed by software to other frequencies.
This commit introduces a generic way to configure this output.

Also the PHY supports different RGMII I/O voltages: 1.5V, 1.8V and 2.5V.
An internal LDO is able to provide 1.5V (default) and 1.8V. The 2.5V
option needs an external supply voltage. This commit adds support to
switch the internal LDO to 1.8V.

Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2020-05-07 11:05:00 -04:00
Michael Walle
2b7721552a phy: atheros: move delay config to common function
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2020-05-07 11:05:00 -04:00
Michael Walle
f6ae47be1a phy: atheros: introduce debug read and write functions
Provide functions to read and write the Atheros debug registers.

Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2020-05-07 11:05:00 -04:00
Michael Walle
30e3193128 phy: atheros: use defines for PHY IDs
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2020-05-07 11:05:00 -04:00
Michael Walle
f4d48f43b2 phy: atheros: fix AR8021 PHY ID mask
The upper bits are all the OUI.

Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2020-05-07 11:05:00 -04:00
Vladimir Oltean
4d4e4cf779 phy: atheros: Clarify the intention of ar8021_config
Debug register 5 contains TX_CLK DELAY at bit 8 and reserved values at
the other bit positions, just like the other PHYs in the family do.
Therefore, it is not necessary to hardcode the reserved values, but
instead simply follow the read-modify-write procedure from the common
function.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2020-05-07 11:05:00 -04:00
Vladimir Oltean
13114f38e2 phy: atheros: Explicitly disable RGMII delays
To eliminate any doubts about the out-of-reset value of the PHY, that
the driver previously relied on.

If bisecting shows that this commit breaks your board you probably have
a wrong PHY interface mode. You probably want the
PHY_INTERFACE_MODE_RGMII_RXID or PHY_INTERFACE_MODE_RGMII_ID mode.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2020-05-07 11:05:00 -04:00
Vladimir Oltean
a234ae863a phy: atheros: Clarify the configuration of the CLK_25M output pin
Also take the opportunity to use the phy_read_mmd and phy_write_mmd
convenience functions.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2020-05-07 11:05:00 -04:00
Vladimir Oltean
29602f9c4b phy: atheros: Use common functions for RGMII internal delays
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2020-05-07 11:05:00 -04:00
Vladimir Oltean
4346df3392 phy: atheros: Make RGMII Tx delays actually configurable for AR8035
Delete the extraneous write to debug reg 5 that enables Tx delay

When the driver was originally introduced in commit "6027384a phylib:
Add Atheros AR8035 GETH PHY support", the Tx delay was being
unconditionally enabled.

Then during "2ec4d10b phy: atheros: add support for RGMII_ID, RGMII_TXID
and RGMII_RXID", the author did not notice that code for enabling Tx
delay code was already. Therefore, the if condition for Tx delay has
always been useless for this PHY since this commit introduced it.

Prior to this patch, every AR8035 PHY in U-boot had Tx delay enabled.
After this patch, only those who define the interface as RGMII_TXID or
RGMII_ID will. This is to be expected, but will nonetheless break the
setups of those who didn't know they rely on Tx delay implicitly.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2020-05-07 11:05:00 -04:00
Andre Przywara
e3e2d662a2 uart: pl011: Add proper DM clock support
Even though the PL011 UART driver claims to be DM compliant, it does not
really a good job with parsing DT nodes. U-Boot seems to adhere to a
non-standard binding, either requiring to have a "skip-init" property in
the node, or to have an extra "clock" property holding the base
*frequency* value for the baud rate generator.
DTs in the U-Boot tree seem to have been hacked to match this
requirement.

The official binding does not mention any of these properties, instead
recommends a standard "clocks" property to point to the baud base clock.

Some boards use simple "fixed-clock" providers, which U-Boot readily
supports, so let's add some simple DM clock code to the PL011 driver to
learn the rate of the first clock, as described by the official binding.

These clock nodes seem to be not ready very early in the boot process,
so provide a fallback value, by re-using the already existing
CONFIG_PL011_CLOCK variable.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
[trini: Add <clock_legacy.h> for get_bus_freq() for layerscape
platforms]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-07 09:01:42 -04:00
Ley Foon Tan
653f7c4467 cache: l2x0: Fix missing write to Auxiliary Control Register
In commit f62782fb29 ("cache: l2x0: Fix write to incorrect shared-override
bit") we removed writel to regs->pl310_aux_ctrl by accident.  This
commit restores it back.

Fixes: f62782fb29 ("cache: l2x0: Fix write to incorrect shared-override bit")
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-05-06 15:12:48 -04:00
Tom Rini
1259567ae3 Merge git://git.denx.de/u-boot-usb
- MediaTek USB host support
2020-05-05 14:53:51 -04:00
Tom Rini
191ee8aac6 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx
- Add DM model for P1010RDB
- Add I2C DM Model support for P1010RDB, T1042RDB, T2080, T4240RDB,
  MPC8548CDS, T1024RDB, P4080, P3041DS, P2041RDB, P2020RDB, P1020RDB,
  P5040DS
- Fix reference to READM.qe_firmware
2020-05-05 09:08:53 -04:00
Tom Rini
143414c03f i.MX for 2020.07
----------------
 
 - imxrt: fix LCD clock, fix doc
 - new board: Coral Dev
 - imx8: enable Cache in SPL. SNVS, update SCFW API
 - imx8MM: fix reset, 8MQ quand and QuadLite, CPU speed grading
 - MX6ULL : is_imx6ull to include i.MX6ULZ
 - Net: add config to enable TXC delay
 
 Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/682033914
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCXq07zQ8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76azngCdG7iFIXq3kg47qliAr44jIa4s/DUAnRzmSTut
 FuQlRhgXrY+Gh94FzrxN
 =MoOz
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20200502' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

i.MX for 2020.07
----------------

- imxrt: fix LCD clock, fix doc
- new board: Coral Dev
- imx8: enable Cache in SPL. SNVS, update SCFW API
- imx8MM: fix reset, 8MQ quand and QuadLite, CPU speed grading
- MX6ULL : is_imx6ull to include i.MX6ULZ
- Net: add config to enable TXC delay

Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/682033914
2020-05-04 09:29:42 -04:00
Daniel Schwierzeck
8510580f2e net: pcnet: fix I/O primitives for memory access
Commit 69529c9120 ("net: pcnet: Switch to PCI memory access")
switched from PCI IO access to PCI memory access without updating
the I/O primitives. Contrary to SH, the primitives for memory
access and IO access are implemented differently. Thus doing
memory access with IO port primitives breaks the driver on
MIPS Malta board.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2020-05-04 08:57:50 -04:00
Tom Rini
04da42770b Merge tag 'u-boot-rockchip-20200501' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- dts clean up to use -u-boot for px30, rk3399 boards
- dts sycn from upstream kernel for rk3328, rk3399
- add rockchip rng driver
- new board support: rk3328-roc-cc, rk3399-roc-pc,Nanopi M4 2GB
2020-05-04 07:28:14 -04:00
Tom Rini
1d5d0275d7 Merge branch 'next' of git://git.denx.de/u-boot-sh
This is part 1 of big network cleanup / DM conversion.
The dc2114x/rtl8139/pcnet/tulip PCI adapter drivers received checkpatch
cleanups in preparation for DM conversion. The smc911x is converted to
DM completely. The dwc_eth_qos cache fixes are applied.
2020-05-04 07:27:06 -04:00
Heinrich Schuchardt
d76485b941 doc: fix references to README.qe_firmware
In two files README.qe_firmware is referenced which never made it into the
U-Boot tree. The README is available in the Linux kernel tree.

Update the references.

Cc: Timur Tabi <timur@kernel.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:37 +05:30
Biwen Li
22e0a84072 rtc: pt7c4338: Add driver model support
Add support of driver model of pt7c4338

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:36 +05:30
Biwen Li
3bebb4f358 rtc: ds1337: Add driver model support
Add support of driver model of ds1337

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:36 +05:30
Frank Li
8142a97d54 cpu: imx8: show RevC instead of Rev? at boot log
Add REVC informaiton.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-03 15:45:49 +02:00
Ye Li
3ee6ea443e cpu: imx_cpu: Print the CPU temperature for iMX8QM A72
iMX8QM registers two thermal devices for CPUs, get the temperature
from "cpu-thermal1" device for A72

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-03 15:45:49 +02:00
Peng Fan
55bc96f3b6 cpu: imx8: fix get core name and rate
When current cpu is A53, using is_cortex_a53 could not detect A72
information, so check cpu device compatible property to get
the correct information.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-03 15:45:49 +02:00
Peng Fan
177f9996d3 cpu: imx8: support a72 as boot cpu
Support booting i.MX8QM with A72 as boot cpu

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-03 15:45:49 +02:00
Peng Fan
adb3bd7654 cpu: imx8: reimplement get cpu count
Return 4 is not correct on i.MX8DX/DXL/8QM and etc. we need to count
available cpu node with device_type "cpu".

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-03 15:45:49 +02:00
Peng Fan
b1e894ff50 cpu: sandbox: support is_current
Support querying whether U-Boot is running on current cpu

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-03 15:45:49 +02:00
Peng Fan
4c809aee50 uclass: cpu: Add new API to get udevice for current CPU
When running on SoC with multiple clusters, the boot CPU may
not be fixed, saying booting from cluster A or cluster B.
Add a API that can return the udevice for current boot CPU.
Cpu driver needs to implement is_current_cpu interface for this
feature, otherwise the API only returns the first udevice in
cpu uclass.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
2020-05-03 15:45:49 +02:00
Frank Li
8f95c0105f usb: gadget: sdp: use CONFIG_SDP_LOADADDR as default load address
If SDP_WRITE and SDP_JUMP addr is zero, use CONFIG_SDP_LOADADDR
as default address

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-03 15:31:34 +02:00
Chunfeng Yun
7410283415 xhci: mediatek: Add support for MTK xHCI host controller
This patch is used to support the on-chip xHCI controller on
MediaTek SoCs, currently control/bulk/interrupt transfers are
supported.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-02 12:32:28 +02:00
Chunfeng Yun
4d4abbd783 phy: phy-mtk-tphy: add a new reference clock
Usually the digital and analog phys use the same reference clock,
but some platforms have two separate reference clocks for each of
them, so add another optional clock to support them.
In order to keep the clock names consistent with PHY IP's, change
the da_ref for analog phy and ref clock for digital phy.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-05-02 12:32:28 +02:00
Chunfeng Yun
d1ae8445ad phy: phy-mtk-tphy: add support new version
The new version removes all shared banks between multi-phys

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-05-02 12:32:28 +02:00
Chunfeng Yun
ee6eabbedd phy: phy-mtk-tphy: add support USB phys
Support USB2 and USB3 PHY with shared banks when support multi-phys

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-05-02 12:32:28 +02:00
Chunfeng Yun
cf67e45179 usb: dwc2_udc_otg: use the phy bulk API to get phys
Use the phy bulk API to get a group of phys

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-05-02 12:32:28 +02:00
Chunfeng Yun
6dfb8a8052 usb: dwc3: use the phy bulk API to get phys
Get a group of phys by the phy bulk API

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-05-02 12:32:28 +02:00
Chunfeng Yun
b13307b470 phy: Add API for a bulk of phys
This patch adds a "bulk" API to the phy API in order to
get/init/exit/power on/off a group of phys associated
with a device.

The bulk API will avoid adding a copy of the same code to
manage a group of phys in drivers.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-02 12:32:28 +02:00
Chunfeng Yun
89b84b85e9 dm: core: Add function to get child count of ofnode or device
This patch add function used to get the child count of
a ofnode or a device

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-02 12:32:28 +02:00
Giulio Benetti
ea0f768e2c clk: imx: clk-imxrt1050: fix lcdif clock gate
LCDIF clock gate was wrong so set it according to RM.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-05-01 19:03:25 +02:00
Giulio Benetti
72fef43d4d video: mxsfb: add clk_enable()
BROM doesn't enable lcdif by default so add clk_enable() after
clk_set_rate().

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-05-01 19:03:18 +02:00
Matthias Brugger
2ef35fcb34 watchdog MediaTek add upstream compatible
The upstream compatible is called mt6589-wdt.
Add this compatible to the driver.

Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-01 11:34:01 -04:00
Matthias Brugger
6609d123ce timer MediaTek use upstream compatible
The timers compatible string in upstream is called
mt6577-timer. Add this compatible to the driver.

Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-01 11:34:01 -04:00
Rasmus Villemoes
b8a42e0fcb rtc: pcf2127: don't add/subtract 1 to tm_mon
As noted in rtc_def.h, the tm_mon field in struct rtc_time is 1-12,
unlike in struct tm where it is 0-11. Currently, running "date" prints
the wrong

Date: 2020-04-01 (Friday)    Time: 13:05:30

and setting the RTC via the date command is also broken.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2020-05-01 11:34:01 -04:00
Marek Vasut
8148693b98 net: smc911x: Add DM support
Add support for U-Boot DM and DT probing. Furthermore, build the
SMC911x standalone EEPROM example only for the non-DM case, as it
is not converted yet.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-05-01 15:37:48 +02:00
Philippe Schenker
a1a34faef2 net: fec: Add possibility to enable TXC delay
This patch enables the possibility to set FEC_ENET_ENABLE_TXC_DELAY or
FEC_ENET_ENABLE_RXC_DELAY so one can via a define enable the RXC or TXC
delay in the MAC.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-05-01 13:46:22 +02:00
Philippe Schenker
c51eef5924 net: phy: micrel: Add basic support for KSZ9131
This adds basic support for the new Micrel KSZ9131 phy.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-05-01 13:46:22 +02:00
Philippe Schenker
0861aa8fed net: phy: micrel: Use defines for PHY_IDs and MASK
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-05-01 13:46:22 +02:00
Franck LENORMAND
242d1cd69b imx8: Configure SNVS
Add a module to configure the tamper and secure violation of
the SNVS using the SCU API.

The module also adds some commands:
 - snvs_cfg: Configure the SNVS HP and LP registers
 - snvs_dgo_cfg: Configure the SNVS DGO bloc if present (8QXP)
 - tamper_pin_cfg: Change the configuration of the tamper pins
 - snvs_clear_status: Allow to write to LPSR and LPTDSR to clear
   status bits

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:22 +02:00
Ye Li
73d769d8af imx8: Update SCFW API to version 1.5
Sync the latest SCFW API with below commit
6dcd0242ae7a53ac ("SCF-105: Revert accidental change") to add
interfaces for PM resource reset and read/write SNVS security
violation and tamper DGO registers.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:22 +02:00
Breno Lima
f959594db2 imx8: scu api: Add support for SECO manufacturing protection APIs
SECO provides APIs to support CAAM manufacturing protection:

- sc_seco_get_mp_key()
- sc_seco_get_mp_sign()
- sc_seco_update_mpmr()

Add SCFW APIs support.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:22 +02:00
Marek Vasut
8eb4fef11b net: smc911x: Split non-DM specific bits from common code
Split network handling functions into non-DM specific parts and
common code in preparation for conversion to DM.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
b11c8bbfaf net: smc911x: Clean up the status handling in smc911x_recv()
Invert the status handling logic in smc911x_recv(), to make the
function easier to read, no functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
3dbab92603 net: smc911x: Pass around driver private data
Introduce a private data structure for this driver with embedded
struct eth_device and pass it around. This prepares the driver to
work with both DM and non-DM systems.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
ba267c781d net: smc911x: Convert IO accessors to {read,write}{w,l}()
Convert the IO accessors to standard ones instead of using volatile
void pointers, as those do not cover all the bus access details.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
f0d73f5cd0 net: smc911x: Drop weak alias from 32bit accessors
These accessors are not overridden by any board, and even if they were,
this is something which should be handled via DM now, so remove the
weak alias option. Moreover, drop the inline keyword, as the compiler
can decide better.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
eb46efa381 net: smc911x: Inline all functions from header file
Inline all the functions from the header file, as they are not used
outside of the driver or the standalone EEPROM example.

Note that this does introduce considerable amount of duplication in
the standalone EEPROM example, however that one has to be rewritten
anyway, roughly such that the SMC911x driver would expose DM EEPROM
interface and the standalone example would use that.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
f51a2f8496 net: smc911x: Pull MII registration into separate function
Pull the MII interface registration into separate function to avoid the
ifdeffery in smc911x_initialize(). Moreover, adjust the fail path such
that we use goto labels.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
9741795408 net: smc911x: Fix potential memleak() in init fail path
Fix memleak in the init fail path, where if allocation or registration
of MDIO bus fails, then ethernet interface is not unregistered and the
private data are not freed, yet the probe function reports a failure.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
6f6cf0083f net: smc911x: Invert the logic in smc911x_miiphy_{read,write}()
Invert the logic in the aforementioned functions to reduce indent,
no functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
49af0cb5a6 net: smc911x: Rename smc911x_rx() to smc911x_recv()
Rename the function to keep the naming scheme consistent,
no functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
882d5f6983 net: smc911x: Replace malloc()+memset() with calloc()
Replace combination of malloc()+memset() with calloc() as the behavior
is exactly the same and the amount of code is reduced.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
9c211e3b05 net: smc911x: Remove pkt_data_{push,pull}
These functions are never used and are likely a pre-DM remnant
from times long past, just remove them.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
e7ab86d9b2 net: rtl8139: Fill in SPDX tag
The rtl8139 driver is derived from Etherboot driver, which is in
turn derived from Linux 8139too driver added in Linux 2.2.18pre14.
An undocumented change in Linux 2.4.10.2 added a new field to the
driver, MODULE_LICENSE("GPL"); . According to current Linux kernel
licensing rules, Documentation/process/license-rules.rst, quote:

	"GPL"	Module is licensed under GPL version 2. This
		does not express any distinction between
		GPL-2.0-only or GPL-2.0-or-later. The exact
		license information can only be determined
		via the license information in the
		corresponding source files.

And since the code does not contain any "future" clause, the tag
is therefore GPL-2.0 only.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
6ee6caaf03 net: rtl8139: Move functions around
Just move functions around in preparation for easy DM conversion,
rename rtl_bcast_addr() to rtl8139_bcast_addr(), no functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
0e5a4117a5 net: rtl8139: Finish cleanup
Finish the checkpatch cleanup of the driver, fix the remaining issues
in probe and init function and in global variables, rename the probe
function to rtl8139_init(), no functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
38b306db23 net: rtl8139: Factor out hardware reset
This hardware reset and reset-wait implementation was twice in the
driver, factor it out into a separate function. This really should
use wait_for_bit() eventually and return -ETIMEDOUT, but thus far,
handling of any of this is missing from the driver. This must be
added later. Thus far, no functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
661479ffc1 net: rtl8139: Minor cleanup of rtl_disable()
Rename the function to rtl8139_stop(), clean up checkpatch errors in
the stop polling function. No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
468fd95562 net: rtl8139: Minor cleanup of rtl_poll()
Rename the function to rtl8139_recv(), clean up various checkpatch errors,
line-over-80 conditions, and malformed comments. No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
67fdbc06be net: rtl8139: Minor cleanup of rtl_transmit()
Rename the function to rtl8139_send(), clean up the TX polling, the TX
OK condition at the end, overuse of typecasts, and various line-over-80
problems. No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
c7a3e35d76 net: rtl8139: Minor cleanup of rtl_reset()
Rename the function to rtl8139_reset(), clean up the reset polling
and various line-over-80 problems. No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
89f3facffb net: rtl8139: Minor cleanup of set_rx_mode()
Rename the function to rtl8139_set_rx_mode(), use unsigned variables
where applicable and inline mc_filter[] values. No functional chanage.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
198e6b571b net: rtl8139: Consistently use rtl8139_rx_config
This string of macros is exactly the same thing as rtl8139_rx_config,
so just use rtl8139_rx_config. No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
17dc95e527 net: rtl8139: Minor cleanup of read_eeprom()
Rename the function to rtl8139_read_eeprom() to keep the naming
consistent, keep the variables sorted in reverse xmas tree. No
functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
f80f4e4d72 net: rtl8139: Rework eeprom_delay() macro
The macro assumes ee_addr variable to be present when it's being
used. Rework the macro into a function instead and pass it an
argument specifying the register base address, to make it future
proof for DM conversion.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
a5e66e515b net: rtl8139: Register macro cleanup
Clean up the horrible register definitions in the RTL8139 driver.
This does create a couple of checkpatch errors, but the driver is
full of them anyway, and those will be cleaned up later.

No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
24891dd8d4 net: dwc_eth_qos: Prevent DMA from writing updated RX DMA descriptor
The DMA may attempt to write a DMA descriptor in the ring while it is
being updated. By writing the DMA descriptor buffer address to 0, it
is assured the DMA will not use such a buffer and the buffer can be
updated without any interference.

Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Stephen Warren <swarren@nvidia.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
a83ca0c280 net: dwc_eth_qos: Invalidate RX packet DMA buffer
This patch prevents an issue where the RX packet might have been
accessed by the CPU, which now has cached data from the packet in
the caches and possibly various write buffers, and these data may
be evicted from the caches into the DRAM while the buffer is also
written by the DMA.

By invalidating the buffer after the CPU accessed it and before the
DMA populates the buffer, it is assured that the buffer will not be
corrupted.

Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Stephen Warren <swarren@nvidia.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
738ee270fe net: dwc_eth_qos: Invalidate RX descriptor before reading
The current code polls the RX desciptor ring for new packets by reading
the RX descriptor status. This works by accident, as the RX descriptors
are often in non-cacheable memory. However, the driver does support use
of RX descriptors in cacheable memory.

This patch adds a missing RX descriptor invalidation, which assures the
CPU will read a fresh copy of the RX descriptor instead of a cached one.

Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Stephen Warren <swarren@nvidia.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
dd90c2e1ea net: dwc_eth_qos: Flush the RX descriptors on init
Currently the code only flushes the first RX descriptor, not every entry
in the RX descriptor ring. Fix this, to make sure the DMA engine can pick
the RX descriptors correctly.

Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Stephen Warren <swarren@nvidia.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
83858d8795 net: dwc_eth_qos: Correctly wrap around TX descriptor tail pointer
This code programs the next descriptor in the TX descriptor ring into
the hardware as the last valid TX descriptor. The problem is that if
the currenty descriptor is the last one in the array, the code will
not wrap around correctly and use TX descriptor 0 again, but instead
will use TX descriptor at address right past the TX descriptor ring,
which is the first descriptor in the RX ring.

Fix this by adding the necessary wrap-around.

Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Stephen Warren <swarren@nvidia.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
4332d80617 net: dwc_eth_qos: Fully rewrite RX descriptor field 3
The RX descriptor field 3 should contain only OWN and BUF1V bits before
being used for receiving data by the DMA engine. However, right now, if
the descriptor was already used for receiving data and is being cleared,
the field 3 is only modified and the aforementioned two bits are ORRed
into the field. This could lead to a residual dirty bits being left in
the field 3 from previous transfer, and it generally does. Fully set the
field 3 instead to clear those residual dirty bits.

Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Stephen Warren <swarren@nvidia.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
c2abfca9be net: dc2114x: Switch DEBUG_SROM{,2} to debug_cond()
Replace the adhoc debugging ifdeffery with debug_cond() and an
internal SROM_DEBUG macro to select the debug level.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
dbe9c0c145 net: dc2114x: Reorganize driver
Move the functions in the driver around to better fit future DM
conversion, drop function forward declarations. No functional
change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
3b7b9e2e71 net: dc2114x: Clean up INL/OUTL functions
Rename these functions to dc2114x_{inl,outl}(), use u32 values in
them instead of plain signed integers as all those values are in
fact register values and the driver code does bitwise operations
on them. No functional change intended.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
04da061209 net: dc2114x: Clean up DE4X5 macros
Replace these macros with static functions to permit the compiler to
do type checking on the functions. The INL()/OUTL() functions have to
be moved in this patch as well, as those DE4X5 macros are using them.
No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
eb216f1e00 net: dc2114x: Clean up remaining driver code
Clean up the remaining driver code, macro space alignment, function
declaration indent, replace __attribute__((aligned(32))) with plain
__aligned(32). No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
2e5c2a103e net: dc2114x: Clean up SROM operations
Clean up the SROM accessors to bring them up to standards with
U-Boot coding style. Sort variable into reverse xmas tree. No
functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
5a0c332a8a net: dc2114x: Clean up send_setup_frame()
Clean up the send_setup_frame() to bring it up to standards with
U-Boot coding style, invert the loops where applicable to cut
down the level of indent. No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
5b4e7dfb87 net: dc2114x: Clean up dc21x4x_halt()
Clean up the driver halt code to bring it up to standards with
U-Boot coding style. No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
9308df81a2 net: dc2114x: Clean up dc21x4x_recv()
Clean up the driver recv code to bring it up to standards with
U-Boot coding style. No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
7c53e3364e net: dc2114x: Clean up dc21x4x_send()
Clean up the driver send code to bring it up to standards with
U-Boot coding style, invert the loops where applicable to cut
down the level of indent. No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
ca5cb04b7f net: dc2114x: Clean up init code
Clean up the driver init code to bring it up to standards with
U-Boot coding style, no functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
69529c9120 net: pcnet: Switch to PCI memory access
Replace the PCI IO access with PCI memory access, the card
supports both, but the former does not work with QEMU SH4.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
3c0bcb97d6 net: pcnet: Replace mips-specific accessors
Replace mips-specific UNCACHED_SDRAM() macro with standard
map_physmem(), which permits the driver to work on other
systems than mips.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
171f5e580e net: tulip: Remove CONFIG_TULIP_*
These macros are not used by any board, remove them to simplify
the driver. The EEPROM accessors are still retained however, as
those might still be useful.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-01 12:35:21 +02:00
Marek Vasut
635a76b703 net: pcnet: Remove CONFIG_PCNET_79C97x
These macros guard one switch-case statement, which grows mips malta
by some 20 bytes if debug is enabled, and even less if it is not. To
make the code simpler, just support all the NICs and be done with it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-05-01 12:35:20 +02:00
Jagan Teki
96993d7c35 clk: rk3399: Set empty for HCLK_SD assigned-clocks
Due to v5.7-rc1 sync the SD controller nodes in rk3399.dtsi
have HCLK_SD assigned-clocks which are usually required for
Linux and don't require to handle them in U-Boot.

 assigned-clocks = <&cru HCLK_SD>;

So, mark them as empty in clock otherwise device probe on
those SD controllers would fail.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-01 18:32:56 +08:00
Tom Rini
b641dd3ec8 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-spi
- distro boot support for SPI flash
- sifive spi flash driver
2020-04-30 18:05:15 -04:00
Jagan Teki
25e4d94f45 spi: sifive: Fix QPP transfer
The guessed reason is that the existing logic of filling
tx fifo with data, rx fifo with NULL for tx transfer and
filling rx fifo with data, tx fifo with NULL for rx transfer
is not clear enough to support the Quad Page Program.
   
SiFive SPI controllers have specific sets of watermark
registers and SPI I/O directions bits in order to program
SPI controllers clear enough to support all sets of operating
modes.
   
Here is the exact programing sequence that would follow on this
patch and tested via SPI-NOR and MMC_SPI.
   
- set the frame format proto, endian
- set the frame format dir, set it for tx and clear it for rx
- TX transfer:
  fill tx fifo with data.
  wait for TX watermark bit to clear.
- RX transfer:
  fill tx fifo with 0xff.
  write nbytes to rx watermark register
  wait for rx watermark bit to clear.
  read the rx fifo data.

So, this patch adopts this program sequence and fixes the existing
I/O direction bit.

Cc: Vignesh R <vigneshr@ti.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Sagar Kadam <sagar.kadam@sifive.com>
2020-04-30 22:34:20 +05:30
Jagan Teki
622b913ea1 spi: sifive: Fix format register proto field
SiFive SPI controller has a proto bit field in frame format
register which would be used to configure the SPI I/O protocol
lines used on specific transfer. 

Right now the driver is configuring this proto using slave->mode,
for all types of transctions. This makes the driver unable to
function since the proto needs to configure dynamically for
each and every transaction separately at runtime.

Now, the controller driver supports per transfer via spi-mem
exec_opo, so add the fmt_proto flag and fill the per transfer
buswidth so that the controller configures the proto bit at
runtime.

This patch fixes the SPI controller works with SPI NOR flash
on quad read with page program.

Cc: Vignesh R <vigneshr@ti.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Sagar Kadam <sagar.kadam@sifive.com>
2020-04-30 22:34:20 +05:30
Jagan Teki
b7d6e104fb spi: sifive: Add spi-mem exec op
SiFive SPI controller is responsible to handle the
slave devices like mmc spi and spi nor flash.

The controller is designed such a way that it would
handle the slave transactions based on the I/O protocol
numbers, example if spi nor slave send quad write opcode
it has to send alone with I/O protocol number of 4 and
if it try to send data it has to send I/O protocol number
along with 4 line data.

But the current spi-xfer code from spi-mem is combining
the opcode and address in a single transaction, so the
SPI controller will be unable to identify the I/O protocol
number of opcode vs address.

So, add the spi-mem exec_op with spi-xfer of opcode, address
and data as a separate transaction. This doesn't remove
the .xfer of dm_spi_ops since mmc spi will make use of it.

Note: This code might have moved to the spi-mem core area
once we have done the dedicated tests on other controllers
and have real reason to move.

Cc: Vignesh R <vigneshr@ti.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Sagar Kadam <sagar.kadam@sifive.com>
2020-04-30 22:34:20 +05:30
Kuldeep Singh
685465fbba mtd: spi-nor-ids: Add Spansion s25fs512s flash entry
Spansion "s25fs512s" flash is incorrectly decoded as "s25fl512s" on
various platforms as former is not present. Add the entry.

Linux already has both the flashes present. A snippet below:
{ "s25fl512s",  INFO6(0x010220, 0x4d0080, 256 * 1024, 256...},
{ "s25fs512s",  INFO6(0x010220, 0x4d0081, 256 * 1024, 256...},

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-04-30 22:34:20 +05:30
Jagan Teki
0a08a614b0 watchdog: kconfig: Enable designware for rk3399
Enable designware watchdog driver for rk3399 if WDT defined.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-04-30 22:34:20 +05:30
Jagan Teki
a976238de3 mtd: spi-nor-ids: Enable 4B_OPCODES for is25wp256
IS25WP256 flash chips do support 4byte address opcodes,
so enable support for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Sagar Kadam <sagar.kadam@sifive.com>
2020-04-30 22:34:20 +05:30
Jagan Teki
5bf3f3dd11 mtd: spi-nor: Enable QE bit for ISSI flash
Enable QE bit for ISSI flash chips.

QE enablement logic is similar to what Macronix
has, so reuse the existing code itself.

Cc: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-04-30 22:34:20 +05:30
Jagan Teki
e67cd814ee spi: sifive: Tidy up dm_spi_slave_platdata variable
Usually variable name slave is used for spi_slave structure
and slave_plat for the dm_spi_slave_platdata.

Let's follow this meaningful notation by replacing slave
with slave_plat for dm_spi_slave_platdata structure.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-30 22:34:20 +05:30
Tom Rini
9f0a6df3a5 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86
- DM ACPI support (Part A)
- Improve support for chain-loading x86 U-Boot
2020-04-30 13:00:20 -04:00
Tom Rini
6d7dacf726 Xilinx changes for v2020.07-rc2
mmc:
 - Fix dt property handling via generic function
 
 clk:
 - Fix versal watchdog clock setting
 
 nand:
 - Fix zynq nand command comparison
 
 xilinx:
 - Enable ubifs
 - Sync board_late_init configurations with initrd_high setup
 - Make custom distro boot more verbose
 
 zynq:
 - Kconfig alignments
 - Fix nand cse configuration
 
 zynqmp:
 - Fix zcu104 low level qspi configuration
 - Small DT updates
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXqp9yAAKCRDKSWXLKUoM
 IXiuAKCLjBKGQ+o+BkJMvjbydF1JgFdXpwCffFPRe6dTkPsLZhpzW/YQMrjidtg=
 =CQTb
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2020.07-rc2' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2020.07-rc2

mmc:
- Fix dt property handling via generic function

clk:
- Fix versal watchdog clock setting

nand:
- Fix zynq nand command comparison

xilinx:
- Enable ubifs
- Sync board_late_init configurations with initrd_high setup
- Make custom distro boot more verbose

zynq:
- Kconfig alignments
- Fix nand cse configuration

zynqmp:
- Fix zcu104 low level qspi configuration
- Small DT updates

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-30 11:34:01 -04:00
Tom Rini
b9da77f195 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- Add DM_ETH support for DPAA1, DPAA2 based RDB platforms: ls1046ardb,
  ls1043ardb, lx2160ardb, ls2088ardb, ls1088ardb.
- Add GICv3 support for ls1028a, ls2088a, ls1088a.
- Add lpuart support on ls1028aqds.
- Few bug fixes and updates on ls2088a, ls1012a, ls1046a, ls1021a based
  platforms.
2020-04-30 10:06:54 -04:00
Simon Glass
f1f4438218 pci: Avoid auto-config when chain loading
When U-Boot is not the first-stage bootloader we don't want to
re-configure the PCI devices, since this has already been done. Add a
check to avoid this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-30 17:40:16 +08:00
Simon Glass
93f7f82782 acpi: Add a method to write tables for a device
A device may want to write out ACPI tables to describe itself to Linux.
Add a method to permit this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-30 17:16:12 +08:00
Madalin Bucur
6eb32a03e0 driver: net: fm: add DM ETH support
Probe the FMan MACs based on the device tree while
retaining the legacy code/functionality.
One notable change introduced here is that, for DM_ETH,
the name of the interfaces is corrected to the fmX-macY
format, that avoids the referral to the MAC block names
which were incorrect for FMan v3 devices (i.e. DTSEC,
TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1).
The legacy code is left unchanged in this respect.

Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29 11:10:54 +05:30
Madalin Bucur
20e0f62952 driver: net: fm: add DM MDIO support
Allow the MDIO devices to be probed based on the device tree.

Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29 11:10:54 +05:30
Madalin Bucur
1c710187a5 driver: net: fm: separate receive buffer free code
Move the receive buffer free code in a separate function.

Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29 11:10:54 +05:30
Madalin Bucur
8313cb0215 driver: net: fm: change init_phy() param
Change the init_phy() parameter to simplify the code.

Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29 11:10:54 +05:30
Ioana Ciornei
988e33f8d4 drivers: net: fsl-mc: add support for CONFIG_DM_ETH
Make any adjustments necessary in order to support DPAA2 devices probed
using CONFIG_DM_ETH. While at it, fixup some styling issues aroung the
switch-case statement.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29 11:10:54 +05:30
Ioana Ciornei
267c5146d3 drivers: net: ldpaa: add DTS based probing support
When CONFIG_DM_ETH is enabled DPAA2 network interfaces will now probe
based on DTS nodes with the "fsl,qoriq-mc-dpmac" compatible.
In this case, transform the ldpaa_eth driver into a UCLASS_ETH driver
and reuse the _open()/_tx()/_stop() functions already inplemented.

For the moment, the ldpaa_eth driver will support both configurations:
with or without CONFIG_DM_ETH enabled. Any 'struct eth_device' occurrence
now has a matching 'struct udevice' made mutually exclusive based on the
state of CONFIG_DM_ETH.

Signed-off-by: Florin Laurentiu Chiculita <florinlaurentiu.chiculita@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29 11:10:43 +05:30
Ioana Ciornei
52e16ec613 drivers: net: add Layerscape mEMAC MDIO driver
Add a driver for the MDIO interface integrated in the mEMAC (Multi-rate
Ethernet Media Access Controller) and the Fman 10G Ethernet MACs.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29 10:49:20 +05:30
Lin Jinhan
6e7353e3d9 rockchip: rng: Add a driver for random number generator(rng) device
Add a driver for the rng device found on rockchip platforms.
Support rng module of crypto v1 and crypto v2.

Signed-off-by: Lin Jinhan <troy.lin@rock-chips.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-04-29 10:30:55 +08:00
Tudor Ambarus
790c1699b2 spi: spi-mem: Add SPI_MEM_NO_DATA to the spi_mem_data_dir enum
Commit: 0ebb261a0b2d ("spi: spi-mem: Add SPI_MEM_NO_DATA to the spi_mem_data_dir enum")
in linux.

When defining spi_mem_op templates we don't necessarily know the size
that will be passed when the template is actually used, and basing the
supports_op() check on op->data.nbytes to know whether there will be
data transferred for a specific operation is not possible.

Add SPI_MEM_NO_DATA to the spi_mem_data_dir enum so that we can base
our checks on op->data.dir instead of op->data.nbytes.

This also fixes a bug identified with the atmel-quaspi driver.
The spi-nor core, when erasing sectors, fills the spi_mem_op template
using SPI_MEM_OP_NO_DATA, which initializes all the data members with
value zero. This is wrong because data.dir is treated as SPI_MEM_DATA_IN,
which translates in our driver to read accesses for erases (RICR), while
the controller expects write accesses (WICR).

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-04-29 01:44:35 +05:30
Robert Marko
f5fba6e85b mtd: nand: spi: add support for Toshiba TC58CVG2S0HRAIJ
Toshiba recently launched new revisions of their serial SLC NAND series.
TC58CVG2S0HRAIJ is a refresh of previous series with minor improvements.
Basic parameters are same so lets add support for this new revision.

Datasheet: https://business.kioxia.com/info/docget.jsp?did=58601&prodName=TC58CVG2S0HRAIJ

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Tested-by: Luka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-04-29 01:44:35 +05:30
Robert Marko
8912710484 mtd: spi-nand: Import Toshiba SPI-NAND support
Linux has good support for Toshiba SPI-NAND, so lets import it.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Tested-by: Luka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-04-29 01:44:35 +05:30
Bacem Daassi
6f3b1f4a1d mtd: spi-nor: Enable dual and quad read for s25fl256s0
The s25fl256s0 supports dual and quad read like s25fl256s1.
Enable it by adding SPI_NOR_DUAL_READ and SPI_NOR_QUAD_READ
flags to the flash_info entry.
Tested on real silicon and confirmed to be working.

Signed-off-by: Bacem Daassi <Bacem.Daassi@cypress.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-04-29 01:44:35 +05:30
Kuldeep Singh
cae3c7cc58 mtd: spi-nor-ids: Enable SPI_NOR_OCTAL_READ flag for mt35xu*
Commit 658df8bd94 ("mtd: spi-nor-core: Add octal mode support")
enables octal mode(1-1-8) support in spi-nor framework.

mt35xu512aba and mt35xu02g supports SINGLE and OCTAL I/O. Hence, enable
SPI_NOR_OCTAL_READ flag for these flashes.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-04-29 01:44:35 +05:30
Pratyush Yadav
0a9c287497 spi: cadence-qspi: Move ref clock calculation to probe
"assigned-clock-parents" and "assigned-clock-rates" DT properties take
effect only after ofdata_to_platdata() when clk_set_defaults() is called
in device_probe(). Therefore clk get rate() would return a wrong value
in ofdata_to_platdata() when compared with probe. Hence it needs to be
moved to probe.

Tested on u-boot-ti/next.

Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Acked-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-04-29 01:44:35 +05:30
Rasmus Villemoes
7ddea75654 spi: use is_power_of_2 instead of hweight32 in spi_nor_write()
hweight32 is a somewhat expensive way to check for power-of-2. Use the
is_power_of_2 helper, which does the standard and cheap idiom
foo&(foo-1)==0.

add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-96 (-96)
Function                                     old     new   delta
spi_nor_write                                388     292     -96

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Acked-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2020-04-29 01:44:35 +05:30
Kuldeep Singh
91afd36f38 spi: Transform the FSL QuadSPI driver to use the SPI MEM API
To support the SPI MEM API, instead of modifying the existing U-Boot
driver, this patch adds a port of the existing Linux driver.
This also has the advantage that porting changes and fixes from Linux will
be easier.
Porting of driver left most of the functions unchanged while few of the
changes are:
-Remove lock(mutexes) and irq handler as u-boot is a single core execution.
-Remove invalid masterid as it was required specially for multicore
execution in LS2088ARDB which is not the case in u-boot.
-Remove clock support as changing spi speed is not supported in uboot and
nor in linux.

Currently tested on LS1088ARDB, LS1012ARDB, LS1046ARDB, LS1046AFRWY,
LS1043AQDS, LS1021ATWR, LS2088ARDB, I.MX6ULL EVK.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
Acked-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2020-04-29 01:44:35 +05:30
Tom Rini
221c4d9826 - fix sd-emmc controller A init on G12A/G12B/SM1 SoCs
- add GXBB USB PHY driver
 - enable access to SPI NOR Flash on VIM2 and VIM3/VIM3L boards
 - fix USB PHYs Power-Up on on VIM3/VIM3L boards
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAl6n6mUACgkQd9zb2sjI
 SdFBsw//VP2GwJZDDVR7WRSPq2I1EXK8vqwzVhOX40oQXp+RaLZCvdnAyPwRr0Gw
 ZJSPTh5PzTZcbK3eId7tPA4uTHkkhlNyzh2nJHCsR5t8dmbKaKBM8xhkzbv3Dt1k
 bLCu42gvActHI3eucFNIpCGXAsK6VNp4A/lsW04Ukc6c9MPk1OkvpbFBaHYsiIh4
 AtAWLX77d4VX+RxTlMz3oRr2Z0+MjQqHWrFkkdq9btn3OESuw7fNTCtUfFCMhEvd
 HfXwyhVX0LIuEH4OOIj19T8ilEYEYhPWhqnZC+YuDc95EymtVZQmTLp1D4NSsCzs
 fBiswAhrd9Dot/jZearMmT+FXFPitsdewwSIlpNgmzMIGZWRRWUP6yKAHPj2OCNF
 Epuu3jdITOYBQS8cgnR1lmN1s0jJ+RYHm7LT1c0ekHRCmcfLMLdbuMtImzllXtvl
 GYx8Fu0qw4Rm0djHGQ2gDSDinYLEzb8pqhoqmfVTN/Vq0L2LDxV0sC5xGM1m2X80
 BHte8hPPLAvkRnb8EPscdt7lSWi1admc0N+0Sa2AQ6S/W7g8oLIXYIfgwcPkwUEZ
 Y7hUenqE+RJ3Do7xnrYre+JH4jIK00bZIxDvHuIm9KxtpDYIMF7hic1T2Q3jmkgB
 H6QpueLM62uUG8ejj0eQO9UXiSsVnax5TZ639BbkZ8wXHMqNQHw=
 =e10O
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20200428' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

- fix sd-emmc controller A init on G12A/G12B/SM1 SoCs
- add GXBB USB PHY driver
- enable access to SPI NOR Flash on VIM2 and VIM3/VIM3L boards
- fix USB PHYs Power-Up on on VIM3/VIM3L boards
2020-04-28 10:09:16 -04:00
Tom Rini
5266ccf957 Merge branch 'master' of git://git.denx.de/u-boot-usb
- DWC2/DWC3 improvements
- Assorted bugfixes
2020-04-28 10:08:47 -04:00
Patrice Chotard
f3bc736e41 usb: host: dwc3-sti-glue: Use UCLASS_NOP instead of UCLASS_MISC
dwc3-sti-glue has been broken since MISC uclass has been
modified to scan DT sub-nodes after bind.
Fixing it by a using the no-op uclass.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2020-04-28 13:52:52 +02:00
Patrick Delaunay
245847f065 usb: host: dwc2: add trace to have clean usb start
Solve issue for the display of "usb start" command on stm32mp1
because one carriage return is missing in DWC2 probe.

Before the patch:

STM32MP> usb start
starting USB...
Bus usb-otg@49000000:    Bus usbh-ehci@5800d000:   USB EHCI 1.00

after the patch:

STM32MP> usb start
starting USB...
Bus usb-otg@49000000: USB DWC2
Bus usbh-ehci@5800d000: USB EHCI 1.00

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-28 13:52:52 +02:00
Patrick Delaunay
6600438166 usb: host: dwc2: force reset assert
Assert reset before deassert in dwc2_reset;
this patch solve issues when the DWC2 registers are already
initialized with value incompatible with host mode.

Force a hardware reset of the IP reset all the DWC2 registers at
default value, the host driver start with a clean state
(Core Soft reset doen in dwc_otg_core_reset is not enought
 to reset all register).

The error can occurs in U-Boot when DWC2 device gadget driver
force device mode (called by ums or dfu command, before to execute
the usb start command).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-28 13:52:52 +02:00
Patrick Delaunay
0bc632c9b1 usb: host: dwc2: add clk support
Add support for clock with driver model.

This patch don't added dependency because when CONFIG_CLK
is not activated the clk function are stubbed.

Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-28 13:52:52 +02:00
Patrick Delaunay
e17a4bf198 usb: host: dwc2: add phy support
Use generic phy to initialize the PHY associated to the
DWC2 device and available in the device tree.

This patch don't added dependency because when CONFIG_PHY
is not activated, the generic PHY function are stubbed.

Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-28 13:52:52 +02:00
Heinrich Schuchardt
3c425fc0ef usb: ether: avoid NULL check before free()
free() checks if its argument is NULL. Do not duplicate this check.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-28 13:52:52 +02:00
Heinrich Schuchardt
cff0144e4c usb: avoid NULL check before free
The free() function checks if the argument is NULL.
Do not duplicate this check.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-28 13:52:52 +02:00
Kever Yang
653ac184ee rockchip: video: Convert to use APIs which support live DT
Use ofnode_ or dev_ APIs instead of fdt_ and fdtdec_ APIs so that the
driver can support live DT.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-28 18:05:08 +08:00
Kever Yang
c3d31af6d6 rockchip: video: Use ofnode_decode_display_timing() to parse timing
Use ofnode_decode_display_timing() instead of
fdtdec_decode_display_timing() to parse display timing, so that we can
support live DT.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-28 18:05:08 +08:00
Neil Armstrong
3dc4f83970 usb: dwc3-meson-g12a: add power-on/off of the PHYs
Power on/off the PHYs to enable power to the USB ports, fixing USB support
on Khadas VIM3/VIM3L boards.

The G12A USB complex has at least 2 USB2 PHYs, but one is muxed between the
DWC2 and DWC3 controller and the other one directly connected to the DWC3
controller. The USB3+PCIe combo PHY is muxed between the DWC3 controller
and a DW-PCIE controller.
All PHYs are optional, but it's type (usb2/usb3) and position are important
to determine it's capabilities, thus they are stored in a fixed size
array and the phy-name determines it's position, it's position determining
it's type and functionnalities.
This is why we need to loop over the array to power on all the DT provided
PHYs.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2020-04-28 10:23:10 +02:00
Beniamino Galvani
df42f32139 phy: meson: add GXBB PHY driver
This adds support for the USB PHY found on Amlogic GXBB SoCs.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-28 10:23:10 +02:00
Neil Armstrong
75dcc2d484 clk: meson: g12a: add missing SD_EMMC_A controller gates
Add missing SD_EMMC_A controller gates needed for probe of the A
controller, otherwise leading to a freeze of the SoC after b3d69aa596.

Fixes: b3d69aa596 ("clk: meson: reset mmc clock on probe")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-28 10:23:10 +02:00
Tom Rini
9b20a794a7 - brcmnand: fix missing code path from Linux driver
- bmips: fix build error when disabling USB
 - mips: add option to restore original exception vector base
 - mips: fix off-by-one error when clearing gd_data
 - mips: minor fixes for compatibility with generic SPL framework
 - spl: refactor legacy image loading
 - spl: add LZMA decompression support for legacy images
 - Makefile: add target to build LZMA compressed U-Boot images
 - mtmips: refactor and rewrite low-level init code
 - mtmips: add and enable SPL support with LZMA
 - mtmips: add support for MT7628 reference board
 - mtmips: add support for VoCore/VoCore2 board
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiQkHUH+J02LLC9InKPlOlyTyXBgFAl6nJ2UACgkQKPlOlyTy
 XBgbMRAAmMj4wy3drAXIkCNSQuiC1vFLo3SazF/NBMLD46uo+pF71FYT2qism0d0
 ntqcwI+SUQ5NSt9TBoQ6b7tTtBUXIXVsYLyAOFNAIeAQBxRXFUcL9c3jJAg5Zxcp
 Qecz4lwP1uGF1iWBAmBITS4Bk2/Lhgg6iZy4e9P/RNhOEGnzXjOdIbqvcvO1cEkA
 rOLZJmF4SvK0TgkSN7IZaQMO7wqgZcjASiJGY2JKMmprbCbVKmecTBa5T1ScnOWn
 Y/Nz0r/4oMSaqBpFYZvx+YLoLc76TK5C7v95QEjlK8epgxNuH9S0Q6LANpNogihu
 VCzxo+KYj+FzLDC030B3PblJhpMLkLrVYl9wmioQ7IiRCnFSE+DcD9dr6vqQ2ChG
 /PHevKJBZyPE4L10Ral41zeUhy/fnGLshDo3bHRjuDAg9O4YgfbqVckfI3kOy062
 W8gVMWtUphQOhgZYFzuyRspSJMc66WNw6Hbbq86QBYg4sEqQG9fQnfyGuE8zYQie
 Kqz1oO+W6xdQEWYrWtpfdxfbkg1NZ7RgN8bptcWKUi86BbCdmcK5iseeOqO8uIc/
 kRYSS7w0YRbPGEdbh79xYAgjvxTNUHjcUexWqT6oASFP2VtnWOCztESfF2kV1y0l
 /OiW/HtZc1uN5cdZIki5ML0Efz/pEVUUEO7Q4gEH7BZGs9FOYMU=
 =2jL1
 -----END PGP SIGNATURE-----

Merge tag 'mips-pull-2020-04-27' of https://gitlab.denx.de/u-boot/custodians/u-boot-mips

- brcmnand: fix missing code path from Linux driver
- bmips: fix build error when disabling USB
- mips: add option to restore original exception vector base
- mips: fix off-by-one error when clearing gd_data
- mips: minor fixes for compatibility with generic SPL framework
- spl: refactor legacy image loading
- spl: add LZMA decompression support for legacy images
- Makefile: add target to build LZMA compressed U-Boot images
- mtmips: refactor and rewrite low-level init code
- mtmips: add and enable SPL support with LZMA
- mtmips: add support for MT7628 reference board
- mtmips: add support for VoCore/VoCore2 board
2020-04-27 17:50:35 -04:00
Tom Rini
37b0228902 Merge tag 'arc-more-fixes-for-2020.07-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-arc
Here we introduce new development platfrom for ARC: HSDK 4xD.
That's pretty much the same base-board as in HSDK but with
very recent quad-core ARC HS47D in the ASIC.

Thus we try to re-use existing code as much as possible while
inevitably add some pieces needed for the new ASIC.

Also we drop selection of bounce buffers on AXS10x
as there's no use of them any longer.
2020-04-27 17:50:11 -04:00
Weijie Gao
caf7092294 sysreset: add reset controller based reboot driver
Some chips provide their sysreset function in reset controller, which is
normally a bit written to 1 to perform the sysreset.

This patch adds a new sysreset driver to take advantage of it.

Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27 20:29:33 +02:00
Álvaro Fernández Rojas
b9ec102bc4 nand: brcmnand: return without disabling clock
Linux Broadcom NAND driver only disabled clock if no childs are initialized.
This section of the code seems to have been accidentally dropped when it was
imported in U-Boot.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2020-04-27 20:29:33 +02:00
Patrick van Gelder
27d706937a ARM: zynq: Fix invalid check on NAND_CMD_NONE.
The end_cmd field in the variables cmd_phase_addr and data_phase_addr
contains the value 0xFF when the end_cmd equals NAND_CMD_NONE. This
should be 0x00.

This is caused by comparing NAND_CMD_NONE (int) with end_cmd (u8).
end_cmd will be promoted by the int value -1 and therefore is not equal
to 0xFF. Solved by casting NAND_CMD_NONE to u8 which will avoid int
promotion.

Signed-off-by: Patrick van Gelder <patrick.vangelder@nl.bosch.com>
Reviewed-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-27 14:21:18 +02:00
T Karthik Reddy
7eab624baf clk: versal: Fix watchdog clock issue
Enable mux based clocks to populate LPD_LSBUS clock to xilinx_wwdt
driver. Skip reading clock rate for the mux based clocks with
parent clock id is zero.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
2020-04-27 13:57:17 +02:00
Benedikt Grassl
942b5fc032 mmc: zynq: parse dt when probing
Currently, the entry "bus-width = <8>" in the ZynqMP's sdhci nodes
is not evaluated. This results in the bus width staying at its default
value (4 bit in HS200 mode).
Fix this by calling mmc_of_parse. This function also checks for the
"no-1-8-v" and "max-frequency" entries. Remove the handling of those
nodes from this driver.

Signed-off-by: Benedikt Grassl <Benedikt.Grassl@rohde-schwarz.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-27 13:53:13 +02:00
Eugeniy Paltsev
1dfb2ec0d7 ARC: HSDK: CGU: add support for timer clock
Add support for additional timer clock which belongs to tunnel
domain.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-04-27 11:20:25 +03:00
Peter Robinson
ea16637525 video: simple_panel: add boe,nv140fhmn49 display
add "boe,nv140fhmn49" display to compatible node.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Anatolij Gustschin <agust@denx.de>
2020-04-26 23:04:49 +02:00
Peter Robinson
973e31fd47 drivers: video: rockchip: fix building eDP and LVDS drivers
The rk_edp.c and rk_lvds.c files reference rk_setreg which is declared in
hardware.h so include it so the drivers build. Adjust rk_lvds.c so
includes are in alphabetical order while updating.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Tested-by: Vagrant Cascadian <vagrant@debian.org>
2020-04-26 22:58:50 +02:00
Heinrich Schuchardt
691132e850 rtc: ds1374: typo Watchdog
%s/Watchdoc/Watchdog/

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-24 16:40:09 -04:00
Rasmus Villemoes
cffedec2e8 spi: mpc8xxx_spi: fix missing dev_err definition
The build currently fails with

drivers/spi/mpc8xxx_spi.c:64:3: warning: implicit declaration of function ‘dev_err’ [-Wimplicit-function-declaration]
...
drivers/spi/built-in.o: In function `mpc8xxx_spi_set_speed':
drivers/spi/mpc8xxx_spi.c:227: undefined reference to `dev_err'

Fixes: 4856cc7a97 (mpc8xxx_spi: implement real ->set_speed)
Fixes: 1a7b462dee (mpc8xxx_spi: put max_cs to use)
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2020-04-24 16:40:09 -04:00
Amit Singh Tomar
8b520ac153 clk: actions: Add common clock driver
This patch converts S900 clock driver to something common that can
be used for other SoCs, for instance S700(few of clk registers are same).

Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24 16:40:09 -04:00
Amit Singh Tomar
4939beea8e arm: dts: sync dts for Action Semi S900
Synchronize device tree bindings with v5.5-rc6 tag with commit id
"b3a987b0264d".

Also, it removes older clock binding defined for S900 along with undocumented
compatible string "actions,s900-serial" from serial driver and adapts clock
driver to cater to new bindings.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24 16:40:09 -04:00
Amit Singh Tomar
bf66584336 serial: actions: add compatible string
This patch adds "actions,owl-uart" string to the owl uart driver. It
is also defined in Linux kernel.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
2020-04-24 16:40:09 -04:00
Ley Foon Tan
f62782fb29 cache: l2x0: Fix write to incorrect shared-override bit
The existing code write bit-0 for shared attribute override enable bit.
It should be bit-22 based on cache controller specification [1].

[1] http://infocenter.arm.com/help/topic/com.arm.doc.ddi0246f/DDI0246F_l2c310_r3p2_trm.pdf

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-04-24 16:40:09 -04:00
Simon Glass
3a905cd231 dm: mmc: Update mmc_get_mmc_dev() to use const *
This function does not modify the device to change it to use const *, so
that callers with a const udevice * can call it without a cast.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-04-24 16:40:09 -04:00
Baruch Siach
593f3976be mtd: nand: pxa3xx: fix raw read when last_chunk_size == 0
Commit 6293b0361d ("mtd: nand: pxa3xx: add raw read support") added the
local data_len variable in handle_data_pio() to track read size, but
forgot to update the condition of drain_fifo() call. That happens to
work when the layout last_chunk_size != 0. But when last_chunk_size ==
0, drain_fifo() is not called to read the last chunk, which leads to
"Wait timeout!!!" error. Fix this.

Fixes: 6293b0361d ("mtd: nand: pxa3xx: add raw read support")
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-04-24 15:17:14 -04:00
Frédéric Danis
df928f8549 bootcount_ext: Add flag to enable/disable bootcount
After a successful upgrade, multiple problem during boot sequence may
trigger the altbootcmd process.
This patch adds a version and an upgrade_available entries to the
bootcount file to enable/disable the bootcount check.
When failing to read the bootcount file it will consider that bootcount is
enabled, acting as previously, and update the file accordingly.

The bootcount file is only saved when `upgrade_available` is true, this
allows to save writes to the filesystem.

Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-24 10:10:00 -04:00
Landen Chao
532de8d99c eth: mtk-eth: add mt7531 switch support in mediatek eth driver
mt7531 is a 7-ports switch with 5 embedded giga phys, and uses the same
MAC design of mt7530. The cpu port6 supports SGMII only. The cpu port5
supports RGMII or SGMII in different model.

mt7531 is connected to mt7622 via both RGMII and SGMII interfaces.
In this patch, mt7531 cpu port5 or port6 is configured to maximum
capability to align CPU MAC setting.

The dts has been committed in the commit 6efa450565 ("arm: dts:
mediatek: add ethernet and sgmii dts node for mt7622")

Signed-off-by: Landen Chao <landen.chao@mediatek.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
2020-04-24 10:09:59 -04:00
Charles Frey
ea8de984e5 watchdog: mpc8xx_wdt: Allow selection of watchdog mode through environment
The mpc8xx watchdog can work either in 'reset mode' or 'NMI mode'.
The selection can be done at startup only.
It is desirable to select the mode without rebuilding U-boot.
It is also desirable to disable the watchdog without rebuilding.

At watchdog startup, check environment variable 'watchdog_mode'.
If it is 'off', the watchdog is not started. If it is 'nmi',
the watchdog is started in NMI mode. Otherwise, it is started
in reset mode which is the default mode.

Signed-off-by: Charles Frey <charles.frey@c-s.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2020-04-24 10:09:59 -04:00
Lokesh Vutla
dbfd9e0e61 dm: pinctrl: Use right device pointer for configuring pinctrl
commit 719cab6d2e ("dm: pinctrl: convert pinctrl-single to livetree")
converted pinctrl driver to livetree. In this conversion, the call to
read pinctrl-single,pins/bits property is provided with pinctrl device
pointer instead of pinctrl config pointer. Because of this none of the
pins gets configured. Fix it by passing the right udevice pointer.

Fixes: 719cab6d2e ("dm: pinctrl: convert pinctrl-single to livetree")
Reported-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-04-23 08:25:37 -04:00
Tom Rini
caad316b31 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell
- mvebu bubt cmd: Add A38x support (Joel)
- Clearfog: Fix SCSI boot duplication (Joel)
- Armada-37xx: Fix DDR PHY clock divider values (Marek)
2020-04-22 13:00:21 -04:00
Tom Rini
2b63959e30 Merge tag 'mmc-2020-4-22' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmc
- iproc_sdhci memory leak fix and enable R1B resp quirk
- more mmc cmds and several mmc updates from Heinirich
- Use bounce buffer for tmio sdhci
- Alignment check for tmio sdhci
2020-04-22 08:58:41 -04:00
Heinrich Schuchardt
2448c34f9f drivers: mmc: rpmb: do not build for SPL
RPMB support is used by the 'mmc rpmb' command and by the OP-TEE support.
We do not need it in SPL.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-04-22 20:41:57 +08:00
Marek Vasut
4a66d4ee33 mmc: tmio: sdhi: Implement get_b_max function
Implement get_b_max() for the Renesas R-Car SDHI controller driver, limit
the b_max per hardware capabilities such that select Gen2 controllers have
16bit block transfer limit, the rest has 32bit block transfer limit and on
Gen3, the block transfer limit on addresses above the 32bit boundary is set
to 1/4 of the malloc area.

Originally, on Gen3, the block transfers above the 32bit area were limited
to PIO only, which resulted in (R8A7795 Salvator-X , HS200 eMMC):
  => time mmc read 0x0000000700000000 0 0x10000
  time: 0.151 seconds
  => time mmc read 0x0000000700000000 0 0x100000
  time: 11.090 seconds
with bounce buffer in place and b_max adjustment in place:
  => time mmc read 0x0000000700000000 0 0x10000
  time: 0.156 seconds
  => time mmc read 0x0000000700000000 0 0x100000
  time: 2.349 seconds

Note that the bounce buffer does mallocate and free the bounce buffer
for every transfer. Experiment which removes this results in further
increase of read speed, from 2.349s to 2.156s per 512 MiB of data,
which is not such a significant improvement anymore. It might however
be interesting to have bounce buffer directly in the MMC core or even
block core.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
2020-04-22 20:41:56 +08:00
Marek Vasut
145429aac0 mmc: Add option to adjust b_max before long read
Add getter function which permits adjusting the maximum number of
blocks that could be read in a single sustained read transfer based
on the location of the source/target buffer and length, before such
transfer starts.

This is mainly useful on systems which have various DMA restrictions
for different memory locations, e.g. DMA limited to 32bit addresses,
and where a bounce buffer is used to work around such restrictions.
Since the U-Boot bounce buffer is mallocated, it's size is limited
by the malloc area size, and the read transfer to such a buffer must
also be limited. However, as not all areas are limited equally, the
b_max should be adjusted accordinly as needed to avoid degrading
performance unnecessarily.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
2020-04-22 20:41:56 +08:00
Marek Vasut
d2661d8e9f mmc: tmio: sdhi: Use bounce buffer to avoid DMA limitations
The R-Car SDHI DMA controller has various restrictions. To work around
those restrictions without falling back to PIO, implement bounce buffer
with custom alignment check function which tests for those limitations.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
2020-04-22 20:41:56 +08:00
Rayagonda Kokatanur
29617ca39a drivers: mmc: iproc_sdhci: move host.mmc init before sdhci_setup_cfg
move host.mmc before sdhci_setup_cfg

Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com>
2020-04-22 20:41:55 +08:00
Rayagonda Kokatanur
7a65b8b6bb drivers: mmc: iproc_sdhci: fix compilation warning
set_ios_post return type changed from void to int, correcting
the same to fix compilation warning.

Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com>
2020-04-22 20:41:55 +08:00
Bharat Kumar Reddy Gooty
2bb02b1a81 drivers: mmc: iproc_sdhci: enable broken R1B response quirk
Enable SDHCI_QUIRK_BROKEN_R1B quirk.

Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com>
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
2020-04-22 20:41:55 +08:00
Bharat Kumar Reddy Gooty
d5b8500f03 drivers: mmc: iproc_sdhci: fix possible memory leak
Free the pointer variable 'iproc_sdhci' upon failure to fix
possible memory leak.

Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com>
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
2020-04-22 20:41:55 +08:00
Heinrich Schuchardt
0469d84636 cmd: mmc: provide boot area protection command
Provide command 'mmc wp' to power on write protect boot areas on eMMC
devices.

The B_PWR_WP_EN bit in the extended CSD register BOOT_WP is set. The boot
area are write protected until the next power cycle occurs.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-22 20:41:55 +08:00
Heinrich Schuchardt
1601ea2126 mmc: export mmc_send_ext_csd()
Export function mmc_send_ext_csd() for reading the extended CSD register.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-22 20:41:54 +08:00
Marek Behún
239f424f49 clk: armada-37xx-periph: fix DDR PHY clock divider values
Register value table for DDR PHY clock divider are wrong. They should be
0 or 1 for divide-by-2 or divide-by-4, respectively. Not 1 or 2. Current
values do not make sense, since 2 cannot be achieved, because the
register is only 1 bit long (mask is set to 1).

This fixes clk dump reporting DDR PHY clock rate differently from Linux.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-22 14:28:15 +02:00
Tom Rini
bdcb29960e Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- Backplane support and bug fixes
2020-04-21 15:20:42 -04:00
Tom Rini
1bf65142b3 Merge tag 'for-v2020.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-i2c
i2c changes for 2020.07
- add new i2c driver for Broadcom iproc-based socs
- fix cmd: eeprom: Staticize eeprom_i2c_bus
- i2c: muxes: pca954x: add PCA9546 variant
2020-04-21 08:28:13 -04:00
Hiroyuki Yokoyama
902af10d67 mmc: tmio: sdhi: Add DMA transfer address alignment check at writing
In R-Car Gen 3, there is a DMA controller restriction of SDHI.
When the transfer exceeding the 4 kByte boundary is performed while
the DRAM address is not 128 byte aligned, the bus is occupied.
This patch avoids this.

Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-04-21 10:12:15 +08:00
Tom Rini
a063758059 Merge branch '2020-04-17-master-imports'
- Further cleanups for 'make refcheckdocs'
- Another BTRFS fix.
- Support for automatic decompression of images with booti as well as
  unlz4 command for manual decompression.
2020-04-20 17:22:47 -04:00
Tom Rini
e4837da782 - enable DM_RNG on meson boards
- fix SMBIOS info on Odroid-C2
 - Fix video output on GXBB/GXL/GXM boards
 - add USB gadget support for GXL/GXM boards
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAl6dk4YACgkQd9zb2sjI
 SdHMkg//ZCBy73xx98g48WqZbeKGpLzpHCYuksa+RIk90tUH2VxpSX2RFPh9F3bs
 5RbzrzDXTgTRRaDPDGS4nDhAnmNnRaGZ0SMGY+2ilt6JD/GW6x1Q3xMJt4spd0Tv
 GnA9jhExZYN0eJampGMXSZX/kO2hjLs929uA+UccxdZZx+q45SPE2Q2tSE+B/3T7
 Owf3PMPLVLyPcdxTN2HBjMKsoPbOpBxIvfwXTucnL2SJE+tBMCdDiObwWSO7nfBa
 zlEntUO0tIOgNLtqDnjQ2o71xQawFMGL0m1vpLXAaS9UUk64tnxgPQewC668X2v/
 aBU7peaA6cMkjpQ4bnWVKnJ4sLS1YdvFaz68TkFSLRHBQLr6XBGcm1biXALhrpId
 e4Rjf6ONJH+mVZtH67vRxaFJ5tpNtDj0ZFM3kzppEeFc5q1ieQ+o+TAC2KmYpi6s
 hH2t3Fs2mh+pXYC9A0eeSXG5hxWKDoT4P8/Wx3DMmDn0cMWjrEZU/yJNUVti2fhO
 8er2NldRFEYmDGAKQ1yeYzUYemZjLFuUEAVZgRaARsjl07MoG0CTqGF8Yf1NwdIT
 xMHBdpjl5iTH4jvOYS5+MqPi7hrr1OCCE9FRwx9KeagudpBzko4HiF8IW5ilQdLb
 GDDqW4RnRv8sYiNsx5cUkQSvoqPfhazawFgrJck3jLqfiVZNKog=
 =1Ffl
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20200420' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

- enable DM_RNG on meson boards
- fix SMBIOS info on Odroid-C2
- Fix video output on GXBB/GXL/GXM boards
- add USB gadget support for GXL/GXM boards
2020-04-20 13:44:27 -04:00
Tom Rini
d1bbf833aa Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx 2020-04-20 08:45:27 -04:00
Neil Armstrong
838c0af9d2 phy: meson-gxl-usb: add set_mode call to force switch to peripheral mode
Add set_mode function in the Amlogic GXL PHYs that will be called by
the arch code to switch PHYs from/to gadget mode.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-20 14:19:10 +02:00
Neil Armstrong
c2b9aa98bf generic-phy: add generic_phy_get_by_node()
Add generic_phy_get_by_node() to get a PHY phandle from a node instead
of a udevice.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[narmstrong: fixed by including ofnode.h in generic-phy.h]
2020-04-20 14:19:10 +02:00
Rayagonda Kokatanur
956d57a8dd drivers: i2c: add brcm iproc I2C driver support
Add I2C driver support for Broadcom iproc-based socs.

Signed-off-by: Arjun Jyothi <arjun.jyothi@broadcom.com>
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com>
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2020-04-20 06:52:28 +02:00
Chris Packham
0b1d7b7271 i2c: muxes: pca954x: add PCA9546 variant
This adds the PCA9546 4-channel i2c bus switch.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Heiko Schocher <hs@denx.de>
2020-04-20 06:47:35 +02:00
Giulio Benetti
ac4e7610da clk: imx: add i.IMXRT1020 clk driver
Add i.MXRT1020 clk driver support.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-04-18 14:54:28 +02:00
Fabio Estevam
417ea635dc pmic: pfuze100: Change error message level to debug
In some cases U-Boot runs the same binary on different board versions.

In wandboard, for example, there are versions with the PFUZE100 PMIC
populated and others without it.

When the PMIC is not present, it is not really useful to get PMIC error,
so change the error message level to debug instead.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Heiko Schocher <hs@denx.de>
2020-04-18 12:59:37 +02:00
Giulio Benetti
76f6bcd742 video: mxsfb: enable setting ENABLE negative polarity
ENABLE signal can now be flipped by writing its bitmask on vdctrl0
register.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-04-18 12:54:43 +02:00
Giulio Benetti
7c30d767b8 video: mxsfb: enable setting PIXDATA on negative edge
DOTCLK signal can now be flipped by writing its bitmask on vdctrl0
register.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-04-18 12:54:43 +02:00
Giulio Benetti
606668af96 video: mxsfb: enable setting VSYNC negative polarity
VSYNC signal can now be flipped by writing its bitmask on vdctrl0
register.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-04-18 12:54:43 +02:00
Giulio Benetti
e121e00352 video: mxsfb: enable setting HSYNC negative polarity
HSYNC signal can now be flipped according to display_flags bitmaks by
writing its bitmask on vdctrl0 register.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-04-18 12:54:43 +02:00
Giulio Benetti
abda0a5a22 video: mxsfb: refactor for using display_timings
struct display_timings provides more informations such clock and DE
polarity, so let's refactor the code to use struct display_timings
instead of struct ctfb_res_modes, so we'll become able to get clock and
DE polarity settings and set register according to them in the next patch.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-04-18 12:54:43 +02:00
Giulio Benetti
aa045701c2 video: mxsfb: add support for i.MXRT
Add support for i.MXRT by adding CONFIG_IMXRT in register structure and
adding .compatible = "fsl,imxrt-lcdif".

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-04-18 12:54:43 +02:00
Giulio Benetti
ceb4ffc74d video: mxsfb: add support for DM CLK
Allow using DM CLK instead of mxs_set_lcdclk() so we can avoid to
implement a special function to set lcd clock on i.MXRT.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-04-18 12:54:43 +02:00
Giulio Benetti
92a68368c0 sunxi: display: use common video_ctfb_mode_to_display_timing()
Since video_ctfb_mode_to_display_timing() has been implemented by moving
sunxi_ctfb_mode_to_display_timing() to video_modes.c and it's meant to be
used by other video subsystem, let's use it instead of local
sunxi_ctfb_mode_to_display_timing().

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-04-18 12:54:43 +02:00
Giulio Benetti
10374da777 videomodes: add helper function to convert from ctfb to display_timing
This function converts from "struct ctf_res_modes" to
"struct display_timing".

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-04-18 12:54:43 +02:00
Giulio Benetti
ecd8497bcb clk: imx: clk-imxrt1050: add set_parent() callback
Need to add set_parent() callback to allow dts assigned-clock-parents to
work so let's add it accordingly.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-04-18 12:54:43 +02:00
Giulio Benetti
caac71b725 clk: imx: clk-imxrt1050: setup PLL5 for video in non-SPL
mxsfb needs PLL5 as source, so let's setup it at its default frequency
specified in RM(650Mhz).

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-04-18 12:54:43 +02:00
Giulio Benetti
d303f9c356 clk: imx: clk-imxrt1050: fix typo in clock name "video:"
"video:" must be "video", ":" is a typo.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-04-18 12:54:43 +02:00
Giulio Benetti
8cefbe98b1 clk: imx: pllv3: add enable_bit
pllv3 PLLs have powerdown/up bits but enable bits too. Specifically
"enable bit" enable the pll output, so when dis/enabling pll by
setting/clearing power_bit we must also set/clear enable_bit.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2020-04-18 12:54:43 +02:00
Heinrich Schuchardt
2799a69ee8 doc: fix references to driver-model
Fix some errors pointed out by 'make refcheckdocs'.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-17 12:32:36 -04:00
Patrick Delaunay
71126d53df tee: optee: use dev_info in print_os_revision
Display TEE version at information level; this patch replaces
debug() call to dev_info() in print_os_revision() function.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-04-17 12:32:36 -04:00
Heinrich Schuchardt
e6e9a4f0a9 block: ide: use definitions from include/libata.h
Currently ATA commands are defined both in include/libata.h and
include/ata.h. Use the command definitions from include/libata.h where
applicable.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-17 12:32:36 -04:00
Sam Shih
a537fa4da1 mediatek: pwm: add pwm driver for MediaTek SoCs
This driver support the standard PWM API for
MediaTek MT7623, MT7622 and MT7629 SoCs

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2020-04-17 12:32:36 -04:00
Francois Gervais
402ef4d244 net: fm: fix build error when not using nand
If CONFIG_CMD_NAND is disabled, get_nand_dev_by_index() is not
accessible.

This fix allows the build to succeed in this case.

Signed-off-by: Francois Gervais <fgervais@distech-controls.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-17 15:13:19 +05:30
Patrick Delaunay
e5301bac5d test: pinmux: add pincontrol-gpio for pin configuration
Add a simple pincontrol associated to the sandbox gpio driver,
that allows to check pin configuration with the command pinmux.

The pinmux test is also updated to test behavior with 2 pincontrols.

Example to check LED pin configuration:

=> pinmux list
| Device                        | Driver                        | Parent
| pinctrl-gpio                  | sandbox_pinctrl_gpio          | root_driver
| pinctrl                       | sandbox_pinctrl               | root_driver

=> pinmux dev pinctrl-gpio

=> pinmux status

a0        : gpio input .
a1        : gpio input .
a2        : gpio input .
a3        : gpio input .
a4        : gpio input .
a5        : gpio output .
a6        : gpio output .
...

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16 23:06:54 -04:00
Patrick Delaunay
ff52665d03 test: dm: update test for pins configuration in gpio
Add tests for new API set_dir_flags and set_dir_flags and associated
code in gpio uclass.

Test support for new flags GPIO_OPEN_DRAIN, GPIO_OPEN_SOURCE
GPIO_PULL_UP and GPIO_PULL_DOWN.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16 23:06:54 -04:00
Patrick Delaunay
2c0f782e0f gpio: sandbox: cleanup binding support
Cleanup binding support, use the generic binding by default
(test u-class gpio_xlate_offs_flags function) and add
specific binding for added value.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16 23:06:54 -04:00
Patrick Delaunay
d15c05b5d0 test: dm: update test for pins configuration in pinctrl node
Add test for "pins" configuration in gpio uclass with set_state() ops
and test for generic parsing of pinconf_param array).

set_state() is called by:
- pinctrl_generic_set_state
 |- pinctrl_generic_set_state_subnode

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16 23:06:54 -04:00
Patrick Delaunay
77ed5692c9 pinctrl: sandbox: Add mux information in get_pin_muxing
Add param information in pin information output.
This update prepare unitary test for pin configuration
in pinctrl node.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16 23:06:54 -04:00
Patrick Delaunay
8fd9daf036 gpio: add ops to set dir flags
Add the ops for GPIO driver set_dir_flags() to set the dir flags.
The user can update the direction and configuration
of each GPIO with a only call to dm_gpio_set_dir_flags() or
dm_gpio_set_dir() and respecting the configuration provided by
device tree (saved in desc->flags).

When these optional ops are absent, the gpio uclass use the mandatory
ops (direction_output, direction_input, get_value) and desc->flags
to manage only the main dir flags:
- GPIOD_IS_IN
- GPIOD_IS_OUT
- GPIOD_IS_OUT_ACTIVE
- GPIOD_ACTIVE_LOW

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16 23:06:54 -04:00
Patrick Delaunay
d2c07e56ab gpio: add ops to get dir flags
Add the ops for GPIO driver get_dir_flags(), allows to get dynamically
the current gpio configuration; it is used by the API function
dm_gpio_get_dir_flags().

When these optional ops are absent, the gpio uclass continues to use
the mandatory ops (direction_output, direction_input, get_value) and
value of desc->flags to manage only the main dir flags:
- GPIOD_IS_IN
- GPIOD_IS_OUT
- GPIOD_IS_OUT_ACTIVE
- GPIOD_ACTIVE_LOW

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16 23:06:54 -04:00
Patrick Delaunay
477ca57b9a gpio: add support of new GPIO direction flag
This commit manages the new dir flags that can be used in gpio
specifiers to indicate the pull-up or pull-down resistor
configuration for output gpio (GPIO_PULL_UP, GPIO_PULL_DOWN)
or the Open Drain/Open Source configuration for input gpio
(GPIO_OPEN_DRAIN, GPIO_OPEN_SOURCE).

These flags are already supported in Linux kernel in gpio lib.

This patch only parse and save the direction flags in GPIO
descriptor (desc->flags), it prepares the introduction of new ops
to manage them.
The GPIO uclass supports new GPIO flags from device-tree
(GPIO_XXX define in include/dt-bindings/gpio/gpio.h)
and translate them in the dir flags (GPIOD_XXX):
- GPIO_PULL_UP     => GPIOD_PULL_UP
- GPIO_PULL_DOWN   => GPIOD_PULL_DOWN
- GPIO_OPEN_DRAIN  => GPIOD_OPEN_DRAIN
- GPIO_OPEN_SOURCE => GPIOD_OPEN_SOURCE

This patch also adds protection in the check_dir_flags function for
new invalid configuration of the dir flags.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16 23:06:54 -04:00
Patrick Delaunay
695e5fd546 gpio: update dir_flags management
Update the flag management in GPIO uclass: the desc->flags is always
combined with the requested flags and the GPIO descriptor is updated
for further call.

Add a function dm_gpio_get_dir_flags to get dynamically
the current dir_flags (configuration and value).

This patch prepare introduction of the dir flags support with new ops.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16 23:06:54 -04:00
Patrick Delaunay
9360bb06f1 gpio: add helper GPIOD_FLAGS_OUTPUT
Add a macro to provide the GPIO output value according
the dir flags content.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16 23:06:54 -04:00
Patrick Delaunay
4292fb16bf gpio: add function check_dir_flags
Add a dir flags validity check with a new function
check_dir_flags.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16 23:06:54 -04:00
Patrick Delaunay
788ea83412 gpio: add function _dm_gpio_set_dir_flags
Introduce the function _dm_gpio_set_dir_flags to set dir flags
without check if the GPIO is reserved.

Separate the reserved check for "set_dir" and "set_dir_flags".

This patch is a preliminary step to add new ops.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16 23:06:54 -04:00
Patrick Delaunay
8a9140cd38 gpio: add function _gpio_get_value
Introduce the function _gpio_get_value to get the GPIO value
without check if it is reserved.
This patch prepare new ops introduction.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16 23:06:54 -04:00
Patrick Delaunay
9f2b066cda gpio: add gpio descriptor initialization helper
Add a helper function gpio_desc_init() to initialize the gpio descriptor;
with this function the flags will be always set to 0.

It wasn't the case before this patch in dm_gpio_lookup_name.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16 23:06:54 -04:00
Patrick Delaunay
e3f3a121d8 gpio: remove the open_drain API and ops
This patch removes the ops get_open_drain/set_open_drain
and the API dm_gpio_get_open_drain/dm_gpio_set_open_drain.

The ops only provided in one driver (mpc8xxx gpio) and the
associated API is never called in boards.

This patch prepare a more generic set/get_dir_flags ops,
including the open drain property.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16 23:06:54 -04:00
Patrick Delaunay
e93f39213a dm: pinctrl: migrate pinctrl-generic to livetree
Migrate pinctrl-generic to livetree:
- dev_for_each_property
- dev_read_prop_by_prop
- dev_read_string_count
- dev_read_string_index
and get rid of DECLARE_GLOBAL_DATA_PTR.

This patch solves the parsing issue during sandbox tests for pin
configuration (OF_LIVE is activated in sandbox_defconfig
and sub node are not correctly parsed in
pinctrl_generic_set_state_subnode with fdt lib API).

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16 23:06:54 -04:00
Patrick Delaunay
ce891fcada dm: core: add ofnode and dev function to iterate on node property
Add functions to iterate on all property with livetree
- dev_read_first_prop
- dev_read_next_prop
- dev_read_prop_by_prop
and
- ofnode_get_first_property
- ofnode_get_next_property
- ofnode_get_property_by_prop

And helper: dev_for_each_property

For example:
struct ofprop property;

dev_for_each_property(property, config) {
	value = dev_read_prop_by_prop(&property, &propname, &len);

or:

for (res = ofnode_get_first_property(node, &property);
     !res;
     res = ofnode_get_next_property(&property))
{
     value = ofnode_get_property_by_prop(&property, &propname, &len);
....
}

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16 23:06:54 -04:00
Patrick Delaunay
719cab6d2e dm: pinctrl: convert pinctrl-single to livetree
Convert 'pinctrl-single' using livetree functions
- dev_read_prop
- dev_read_u32_default
- dev_read_u32_array
- dev_read_bool
- dev_read_addr
and get rid of DECLARE_GLOBAL_DATA_PTR.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16 23:06:54 -04:00
Tom Rini
0f238dab6d Merge tag 'arc-fixes-for-2020.07-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-arc
This is pretty minor set of changes mostly touching HSDK board:

 * Enable on-chip reset controller on HSDK
 * Add possibility to turn-on & off L2$ on more
   recent ARC HS processors.
 * AXI tunnel clock calculation on HSDK
2020-04-16 17:14:44 -04:00
Tom Rini
cf87f7cd8c Pull request for UEFI sub-system for efi-2020-07-rc1
This pull request
 
 * provides an implementation of UEFI secure booting
 * fixes a problem with the rsa_mod_exp driver which stops some boards
   from booting when CONFIG_RSA is enabled which is needed for UEFI
   secure booting
 * enables the EFI_RNG_PROTOCOL if DM_RNG is enabled
 * fixes some function comments
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl6YjlcACgkQxIHbvCwF
 GsQ6Jg/+KVRQF0Dn2jiag8Me9ZhafZx4xGTI3LEzFD7V9kG3dmUzbO3m8a5dEevW
 bcPNA6EmcKAjyP09AZY4C8ns4sU7wzPu/GQvApD4S5+vcuNbEqRHfW6zzReNXq09
 t89DrFH+XLhGnh4uSh0hmfjrlIPVi86hs/f57vKRayrBu8W2yGPci3SNTO5Y0AY1
 to7sxP3hGlDCUhqIABWp5ylpWWUSG1MsVNcMOnHpj+jl0iWWYP46EQrGr95egQor
 gcGgUOLdOLLOHPYUIOBmo9INnS2MbvE9Mfgh5Bw7JW8DIu/Xp7r1qePQyMLsngc1
 pO5yzwMq6EQy6OjuYnXdIBXtHOlZ8rnE9pbTgyUR8T/2CdL2hqr9ddpqa4ryDABX
 iaQF8FG+KhY0XQ5EIJV7pEkvf9TMwGguJNlOkmJPeub2n9i0k1tPk0Rwq5ZWWBIn
 rHcgZXwl0On3O3f0HvfL0Oas5u9KE1HhA12h/EVmu2Muy36x2WxAAzDnsH19HzqU
 QnWBAo8VMyp3qTIZjb3y+qrxcU/joPGt9+hxmur03hzmKOJ9JNOv6vExb+yUIyXQ
 4ML6jvTvSVZbvkP++0zMKOjT8ks3xv5q84oFD5Gp4cG8ZpHpA9dj3mXM92Waepo4
 pAkko5IGQ4SqaGIBltEQzrG+cCiHHezdD/raCwAo6DgYSmfZUvc=
 =+ZDZ
 -----END PGP SIGNATURE-----

Merge tag 'efi-2020-07-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for efi-2020-07-rc1

This pull request

* provides an implementation of UEFI secure booting
* fixes a problem with the rsa_mod_exp driver which stops some boards
  from booting when CONFIG_RSA is enabled which is needed for UEFI
  secure booting
* enables the EFI_RNG_PROTOCOL if DM_RNG is enabled
* fixes some function comments
2020-04-16 16:41:40 -04:00
Eugeniy Paltsev
7b50db8242 ARC: HSDK: CGU: fix tunnel clock calculation
We set wrong tunnel PLL frequency when we request 125MHz tunnel clock.
Fix that.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-04-16 23:37:10 +03:00