xhci: mediatek: Add support for MTK xHCI host controller

This patch is used to support the on-chip xHCI controller on
MediaTek SoCs, currently control/bulk/interrupt transfers are
supported.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
This commit is contained in:
Chunfeng Yun 2020-05-02 11:35:18 +02:00 committed by Marek Vasut
parent 4d4abbd783
commit 7410283415
5 changed files with 323 additions and 0 deletions

View File

@ -30,6 +30,12 @@ config USB_XHCI_DWC3_OF_SIMPLE
Support USB2/3 functionality in simple SoC integrations with
USB controller based on the DesignWare USB3 IP Core.
config USB_XHCI_MTK
bool "Support for MediaTek on-chip xHCI USB controller"
depends on ARCH_MEDIATEK
help
Enables support for the on-chip xHCI controller on MediaTek SoCs.
config USB_XHCI_MVEBU
bool "MVEBU USB 3.0 support"
default y

View File

@ -51,6 +51,7 @@ obj-$(CONFIG_USB_XHCI_DWC3_OF_SIMPLE) += dwc3-of-simple.o
obj-$(CONFIG_USB_XHCI_ROCKCHIP) += xhci-rockchip.o
obj-$(CONFIG_USB_XHCI_EXYNOS) += xhci-exynos5.o
obj-$(CONFIG_USB_XHCI_FSL) += xhci-fsl.o
obj-$(CONFIG_USB_XHCI_MTK) += xhci-mtk.o
obj-$(CONFIG_USB_XHCI_MVEBU) += xhci-mvebu.o
obj-$(CONFIG_USB_XHCI_OMAP) += xhci-omap.o
obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o

303
drivers/usb/host/xhci-mtk.c Normal file
View File

@ -0,0 +1,303 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2019 MediaTek, Inc.
* Authors: Chunfeng Yun <chunfeng.yun@mediatek.com>
*/
#include <clk.h>
#include <common.h>
#include <dm.h>
#include <dm/devres.h>
#include <generic-phy.h>
#include <malloc.h>
#include <usb.h>
#include <linux/errno.h>
#include <linux/compat.h>
#include <power/regulator.h>
#include <linux/iopoll.h>
#include <usb/xhci.h>
/* IPPC (IP Port Control) registers */
#define IPPC_IP_PW_CTRL0 0x00
#define CTRL0_IP_SW_RST BIT(0)
#define IPPC_IP_PW_CTRL1 0x04
#define CTRL1_IP_HOST_PDN BIT(0)
#define IPPC_IP_PW_STS1 0x10
#define STS1_IP_SLEEP_STS BIT(30)
#define STS1_U3_MAC_RST BIT(16)
#define STS1_XHCI_RST BIT(11)
#define STS1_SYS125_RST BIT(10)
#define STS1_REF_RST BIT(8)
#define STS1_SYSPLL_STABLE BIT(0)
#define IPPC_IP_XHCI_CAP 0x24
#define CAP_U3_PORT_NUM(p) ((p) & 0xff)
#define CAP_U2_PORT_NUM(p) (((p) >> 8) & 0xff)
#define IPPC_U3_CTRL_0P 0x30
#define CTRL_U3_PORT_HOST_SEL BIT(2)
#define CTRL_U3_PORT_PDN BIT(1)
#define CTRL_U3_PORT_DIS BIT(0)
#define IPPC_U2_CTRL_0P 0x50
#define CTRL_U2_PORT_HOST_SEL BIT(2)
#define CTRL_U2_PORT_PDN BIT(1)
#define CTRL_U2_PORT_DIS BIT(0)
#define IPPC_U3_CTRL(p) (IPPC_U3_CTRL_0P + ((p) * 0x08))
#define IPPC_U2_CTRL(p) (IPPC_U2_CTRL_0P + ((p) * 0x08))
struct mtk_xhci {
struct xhci_ctrl ctrl; /* Needs to come first in this struct! */
struct xhci_hccr *hcd;
void __iomem *ippc;
struct udevice *dev;
struct udevice *vusb33_supply;
struct udevice *vbus_supply;
struct clk_bulk clks;
struct phy_bulk phys;
int num_u2ports;
int num_u3ports;
};
static int xhci_mtk_host_enable(struct mtk_xhci *mtk)
{
u32 value;
u32 check_val;
int ret;
int i;
/* power on host ip */
clrbits_le32(mtk->ippc + IPPC_IP_PW_CTRL1, CTRL1_IP_HOST_PDN);
/* power on and enable all u3 ports */
for (i = 0; i < mtk->num_u3ports; i++) {
clrsetbits_le32(mtk->ippc + IPPC_U3_CTRL(i),
CTRL_U3_PORT_PDN | CTRL_U3_PORT_DIS,
CTRL_U3_PORT_HOST_SEL);
}
/* power on and enable all u2 ports */
for (i = 0; i < mtk->num_u2ports; i++) {
clrsetbits_le32(mtk->ippc + IPPC_U2_CTRL(i),
CTRL_U2_PORT_PDN | CTRL_U2_PORT_DIS,
CTRL_U2_PORT_HOST_SEL);
}
/*
* wait for clocks to be stable, and clock domains reset to
* be inactive after power on and enable ports
*/
check_val = STS1_SYSPLL_STABLE | STS1_REF_RST |
STS1_SYS125_RST | STS1_XHCI_RST;
if (mtk->num_u3ports)
check_val |= STS1_U3_MAC_RST;
ret = readl_poll_timeout(mtk->ippc + IPPC_IP_PW_STS1, value,
(check_val == (value & check_val)), 20000);
if (ret)
dev_err(mtk->dev, "clocks are not stable 0x%x!\n", value);
return ret;
}
static int xhci_mtk_host_disable(struct mtk_xhci *mtk)
{
int i;
/* power down all u3 ports */
for (i = 0; i < mtk->num_u3ports; i++)
setbits_le32(mtk->ippc + IPPC_U3_CTRL(i), CTRL_U3_PORT_PDN);
/* power down all u2 ports */
for (i = 0; i < mtk->num_u2ports; i++)
setbits_le32(mtk->ippc + IPPC_U2_CTRL(i), CTRL_U2_PORT_PDN);
/* power down host ip */
setbits_le32(mtk->ippc + IPPC_IP_PW_CTRL1, CTRL1_IP_HOST_PDN);
return 0;
}
static int xhci_mtk_ssusb_init(struct mtk_xhci *mtk)
{
u32 value;
/* reset whole ip */
setbits_le32(mtk->ippc + IPPC_IP_PW_CTRL0, CTRL0_IP_SW_RST);
udelay(1);
clrbits_le32(mtk->ippc + IPPC_IP_PW_CTRL0, CTRL0_IP_SW_RST);
value = readl(mtk->ippc + IPPC_IP_XHCI_CAP);
mtk->num_u3ports = CAP_U3_PORT_NUM(value);
mtk->num_u2ports = CAP_U2_PORT_NUM(value);
dev_info(mtk->dev, "u2p:%d, u3p:%d\n",
mtk->num_u2ports, mtk->num_u3ports);
return xhci_mtk_host_enable(mtk);
}
static int xhci_mtk_ofdata_get(struct mtk_xhci *mtk)
{
struct udevice *dev = mtk->dev;
int ret = 0;
mtk->hcd = devfdt_remap_addr_name(dev, "mac");
if (!mtk->hcd) {
dev_err(dev, "failed to get xHCI base address\n");
return -ENXIO;
}
mtk->ippc = devfdt_remap_addr_name(dev, "ippc");
if (!mtk->ippc) {
dev_err(dev, "failed to get IPPC base address\n");
return -ENXIO;
}
dev_info(dev, "hcd: 0x%p, ippc: 0x%p\n", mtk->hcd, mtk->ippc);
ret = clk_get_bulk(dev, &mtk->clks);
if (ret) {
dev_err(dev, "failed to get clocks %d!\n", ret);
return ret;
}
ret = device_get_supply_regulator(dev, "vusb33-supply",
&mtk->vusb33_supply);
if (ret)
debug("can't get vusb33 regulator %d!\n", ret);
ret = device_get_supply_regulator(dev, "vbus-supply",
&mtk->vbus_supply);
if (ret)
debug("can't get vbus regulator %d!\n", ret);
return 0;
}
static int xhci_mtk_ldos_enable(struct mtk_xhci *mtk)
{
int ret;
ret = regulator_set_enable(mtk->vusb33_supply, true);
if (ret < 0 && ret != -ENOSYS) {
dev_err(mtk->dev, "failed to enable vusb33 %d!\n", ret);
return ret;
}
ret = regulator_set_enable(mtk->vbus_supply, true);
if (ret < 0 && ret != -ENOSYS) {
dev_err(mtk->dev, "failed to enable vbus %d!\n", ret);
regulator_set_enable(mtk->vusb33_supply, false);
return ret;
}
return 0;
}
static void xhci_mtk_ldos_disable(struct mtk_xhci *mtk)
{
regulator_set_enable(mtk->vbus_supply, false);
regulator_set_enable(mtk->vusb33_supply, false);
}
static int xhci_mtk_phy_setup(struct mtk_xhci *mtk)
{
struct udevice *dev = mtk->dev;
struct phy_bulk *phys = &mtk->phys;
int ret;
ret = generic_phy_get_bulk(dev, phys);
if (ret)
return ret;
ret = generic_phy_init_bulk(phys);
if (ret)
return ret;
ret = generic_phy_power_on_bulk(phys);
if (ret)
generic_phy_exit_bulk(phys);
return ret;
}
static void xhci_mtk_phy_shutdown(struct mtk_xhci *mtk)
{
generic_phy_power_off_bulk(&mtk->phys);
generic_phy_exit_bulk(&mtk->phys);
}
static int xhci_mtk_probe(struct udevice *dev)
{
struct mtk_xhci *mtk = dev_get_priv(dev);
struct xhci_hcor *hcor;
int ret;
mtk->dev = dev;
ret = xhci_mtk_ofdata_get(mtk);
if (ret)
return ret;
ret = xhci_mtk_ldos_enable(mtk);
if (ret)
goto ldos_err;
ret = clk_enable_bulk(&mtk->clks);
if (ret)
goto clks_err;
ret = xhci_mtk_phy_setup(mtk);
if (ret)
goto phys_err;
ret = xhci_mtk_ssusb_init(mtk);
if (ret)
goto ssusb_init_err;
hcor = (struct xhci_hcor *)((uintptr_t)mtk->hcd +
HC_LENGTH(xhci_readl(&mtk->hcd->cr_capbase)));
return xhci_register(dev, mtk->hcd, hcor);
ssusb_init_err:
xhci_mtk_phy_shutdown(mtk);
phys_err:
clk_disable_bulk(&mtk->clks);
clks_err:
xhci_mtk_ldos_disable(mtk);
ldos_err:
return ret;
}
static int xhci_mtk_remove(struct udevice *dev)
{
struct mtk_xhci *mtk = dev_get_priv(dev);
xhci_deregister(dev);
xhci_mtk_host_disable(mtk);
xhci_mtk_ldos_disable(mtk);
clk_disable_bulk(&mtk->clks);
return 0;
}
static const struct udevice_id xhci_mtk_ids[] = {
{ .compatible = "mediatek,mtk-xhci" },
{ }
};
U_BOOT_DRIVER(usb_xhci) = {
.name = "xhci-mtk",
.id = UCLASS_USB,
.of_match = xhci_mtk_ids,
.probe = xhci_mtk_probe,
.remove = xhci_mtk_remove,
.ops = &xhci_usb_ops,
.bind = dm_scan_fdt_dev,
.priv_auto_alloc_size = sizeof(struct mtk_xhci),
.flags = DM_FLAG_ALLOC_PRIV_DMA,
};

View File

@ -610,6 +610,16 @@ static int xhci_set_configuration(struct usb_device *udev)
ep_ctx[ep_index]->tx_info =
cpu_to_le32(EP_MAX_ESIT_PAYLOAD_LO(max_esit_payload) |
EP_AVG_TRB_LENGTH(avg_trb_len));
/*
* The MediaTek xHCI defines some extra SW parameters which
* are put into reserved DWs in Slot and Endpoint Contexts
* for synchronous endpoints.
*/
if (IS_ENABLED(CONFIG_USB_XHCI_MTK)) {
ep_ctx[ep_index]->reserved[0] =
cpu_to_le32(EP_BPKTS(1) | EP_BBM(1));
}
}
return xhci_configure_endpoints(udev, false);

View File

@ -670,6 +670,9 @@ struct xhci_ep_ctx {
/* deq bitmasks */
#define EP_CTX_CYCLE_MASK (1 << 0)
/* reserved[0] bitmasks, MediaTek xHCI used */
#define EP_BPKTS(p) (((p) & 0x7f) << 0)
#define EP_BBM(p) (((p) & 0x1) << 11)
/**
* struct xhci_input_control_context