mmc: tmio: sdhi: Add DMA transfer address alignment check at writing

In R-Car Gen 3, there is a DMA controller restriction of SDHI.
When the transfer exceeding the 4 kByte boundary is performed while
the DRAM address is not 128 byte aligned, the bus is occupied.
This patch avoids this.

Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
This commit is contained in:
Hiroyuki Yokoyama 2020-03-07 17:32:59 +01:00 committed by Peng Fan
parent e4837da782
commit 902af10d67

View File

@ -358,14 +358,16 @@ static int tmio_sd_dma_xfer(struct udevice *dev, struct mmc_data *data)
}
/* check if the address is DMA'able */
static bool tmio_sd_addr_is_dmaable(const char *src)
static bool tmio_sd_addr_is_dmaable(struct mmc_data *data)
{
uintptr_t addr = (uintptr_t)src;
uintptr_t addr = (uintptr_t)data->src;
if (!IS_ALIGNED(addr, TMIO_SD_DMA_MINALIGN))
return false;
#if defined(CONFIG_RCAR_GEN3)
if (!(data->flags & MMC_DATA_READ) && !IS_ALIGNED(addr, 128))
return false;
/* Gen3 DMA has 32bit limit */
if (addr >> 32)
return false;
@ -480,7 +482,7 @@ int tmio_sd_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
if (data) {
/* use DMA if the HW supports it and the buffer is aligned */
if (priv->caps & TMIO_SD_CAP_DMA_INTERNAL &&
tmio_sd_addr_is_dmaable(data->src))
tmio_sd_addr_is_dmaable(data))
ret = tmio_sd_dma_xfer(dev, data);
else
ret = tmio_sd_pio_xfer(dev, cmd, data);