Commit Graph

5567 Commits

Author SHA1 Message Date
Etienne Carriere
5f9070a4a4 optee: copy FDT OP-TEE related nodes before generic FDT changes
Move call to optee_copy_fdt_nodes() introduced by commit 6ccb05eae0
before generic changes in kernel FDT so that platform specific changes
are not overridden by the changes made by this function.

Fixes: 6ccb05eae0 ("image: fdt: copy possible optee nodes to a loaded devicetree")
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-09-30 11:31:13 -04:00
Peter Robinson
324d77998e Define default CONFIG_PREBOOT with right config option
The 44758771ee commit removes CONFIG_PREBOOT but actually sets the USE_PREBOOT
Kconfig option which isn't CONFIG_PREBOOT and is also a bool option which means
we regress because 'usb start' isn't run when expected, it should also be run
for devices that have USB storage because keyboards aren't the only thing we
might need the USB bus for.

Fixes: 44758771ee ("arm: move CONFIG_PREBOOT="usb start" to KConfig")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Jonas Smedegaard <dr@jones.dk>
Cc: Neil Armstrong <narmstrong@baylibre.com>
2020-09-29 13:17:33 -04:00
Tom Rini
67ece26d8b Xilinx changes for v2021.01
arm64:
 - Support for bigger U-Boot images compiled with PIE
 
 microblaze:
 - Extend support for LE/BE systems
 
 zynqmp:
 - Refactor silicon ID detection code with using firmware interface
 - Add support for saving variables based on bootmode
 
 zynqmp-r5:
 - Fix MPU mapping and defconfig setting.
 
 xilinx:
 - Minor driver changes: names alignment
 - Enable UBIFS
 - Minor DT and macros fixes
 - Fix boot with appended DT
 - Fix distro boot
 
 cmd:
 - pxe: Add fixing for platforms with manual relocation support
 
 clk:
 - fixed_rate: Add DM flag to support early boot on r5
 
 fpga:
 - zynqmppl: Use only firmware interface and enable SPL build
 
 serial:
 - uartlite: Enable for ARM systems and support endians
 
 mmc:
 - zynq: Fix indentation
 
 net:
 - gem: Support for multiple phys
 - emac: Fix 64bit support and enable it for arm64
 
 kconfig:
 - Setup default values for Xilinx platforms
 - Fix dependecies for Xilinx drivers
 - Source board Kconfig only when platform is enabled
 - Fix FPGA Kconfig entry with SPL
 - Change some defconfig values
 
 bindings:
 - Add binding doc for vsc8531
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCX2x4MgAKCRDKSWXLKUoM
 IZQtAJ9HpNwG5q3nHt9WedzLCTkr3YoLAACeJJ0Wlpp5p5xPzuPmnoo/Vi4MtNQ=
 =yxRo
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2021.01' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2021.01

arm64:
- Support for bigger U-Boot images compiled with PIE

microblaze:
- Extend support for LE/BE systems

zynqmp:
- Refactor silicon ID detection code with using firmware interface
- Add support for saving variables based on bootmode

zynqmp-r5:
- Fix MPU mapping and defconfig setting.

xilinx:
- Minor driver changes: names alignment
- Enable UBIFS
- Minor DT and macros fixes
- Fix boot with appended DT
- Fix distro boot

cmd:
- pxe: Add fixing for platforms with manual relocation support

clk:
- fixed_rate: Add DM flag to support early boot on r5

fpga:
- zynqmppl: Use only firmware interface and enable SPL build

serial:
- uartlite: Enable for ARM systems and support endians

mmc:
- zynq: Fix indentation

net:
- gem: Support for multiple phys
- emac: Fix 64bit support and enable it for arm64

kconfig:
- Setup default values for Xilinx platforms
- Fix dependecies for Xilinx drivers
- Source board Kconfig only when platform is enabled
- Fix FPGA Kconfig entry with SPL
- Change some defconfig values

bindings:
- Add binding doc for vsc8531
2020-09-24 08:33:47 -04:00
Michal Simek
975bacc16e spl: Kconfig: Record proper dependency for SPL_ATF
ATF support was all the time based on FIT image support but this dependency
is not recorded anywhere.
For !SPL_FIT && SPL_ATF there is compilation error:
common/spl/spl.c: In function 'board_init_r':
common/spl/spl.c:689:26: error: 'struct spl_image_info' has no member named 'fdt_addr'
  689 |   spl_fixup_fdt(spl_image.fdt_addr);

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-09-23 10:31:41 +02:00
Michal Simek
29bd8ada52 fpga: kconfig: Rename SPL_FPGA_SUPPORT to SPL_FPGA
The patch does sed 's/SPL_FPGA_SUPPORT/SPL_FPGA/g' but also fixing Makefile
and zynqmp.c to simplify if/endif logic in zynqmp.c.

This change is mostly done to be able to use CONFIG_IS_ENABLED macro and
obj-$(CONFIG_$(SPL_)FPGA) in Makefile. For them symbols need to be in sync.

And removing one line from Topic Miami boards which is not needed because
symbol is not enabled via Kconfig.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-23 10:31:41 +02:00
Heinrich Schuchardt
e5b35f706d log: mute messages generated by log drivers
When a message is written by a log driver (e.g. via the network stack) this
may result in the generation of further messages. We cannot allow these
additional messages to be emitted as this might result in an infinite
recursion.

Up to now only the syslog driver was safeguarded. We should safeguard all
log drivers instead.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-22 12:54:13 -06:00
Tom Rini
751b18b8a1 Merge branch 'master' into next
Merge in v2020.10-rc5
2020-09-21 14:25:37 -04:00
Reuben Dowle
eb39d8ba5f Fix data abort caused by mis-aligning FIT data
Attempting to place device tree immediately after an image in memory can lead
to mis-aligned data accesses if that image size is not divisible by the
alignment requirements of the architecture.

Data aborts caused by this were observed on a custom Marvel A388 based system,
where the image was a uboot FIT file. The total size varies depending on the
uboot device tree size, which does not always lead to correct alignment.

The minimum alignment specified for ARM [1] and ARM64 [2] linux booting has been
used

[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/arm/booting.rst#n126
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/arm64/booting.rst#n45

Signed-off-by: Reuben Dowle <reuben.dowle@4rf.com>
2020-09-11 17:13:56 -04:00
Heinrich Schuchardt
21d3946840 bootm: update image OS image size when decompressing
In bootm_load_os() the OS image is decompressed. In later stages of the
boot process we need the decompressed size of the image.

Update images->os.image_len after decompression.

Passing the correct size is necessary if we want to check loaded EFI
binararies for file truncation by comparing the loaded size to the header
field SizeOfImage.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-11 17:13:56 -04:00
Michal Simek
91b735d11f common: Kconfig: Add dependency for default variables strings
Kconfig provides several config options for setting up default variables
but these are unused when variables are passed to U-Boot via file.
That's why cover this dependency in Kconfig.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-09-11 17:13:55 -04:00
Tom Rini
314b9b4a38 Merge branch 'remove-config-nr-dram-banks-v9-2020-08-26' of https://gitlab.denx.de/u-boot/custodians/u-boot-marvell into next 2020-09-07 14:31:00 -04:00
Frank Li
0ced2faba0 sdp: call board_usb_init at spl_sdp_load_image
Need initialize UDC before run sdp download

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-09-01 14:47:43 +02:00
Heinrich Schuchardt
73f4ebb659 dfu: fix dfu tftp on sandbox
The environment variable loadaddr is in the virtual address space of the
sandbox. To get the actual memory address where the FIT image has been
loaded we have to convert this address according to the memory mapping of
the sandbox.

Equally the addresses in the *.its file have to be converted when used in
the dfu_ram driver.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-01 14:47:43 +02:00
Heinrich Schuchardt
4e620eb98b dfu: fix typo parameteres
%s/parameteres/parameters/g

Even if a line exceeds 80 characters we should not split output strings
to make debugging easier.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-01 14:47:43 +02:00
Baruch Siach
7f98b4eeee image: don't exceed gd->ram_top in bootm_size
When board_get_usable_ram_top() limits gd->ram_top, env_get_bootm_size()
must not exceed that limit. Otherwise, boot_relocate_fdt() might put fdt
out of the allowed RAM range.

The similar commit 8ce1f10cf2 ("ARM: bootm: take into account
gd->ram_top") exposed this bug.

This fixes boot on Armada 8040 based Clearfog GT-8K where ram_top is set
to 0x80000000 (2GB), but bi_dram[0].size might be up to 0xc0000000
(3GB). Note the relocated fdt address (0xbfff4000) in the console output
listed below:

Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
62 bytes read in 21 ms (2 KiB/s)
1:	linux
Retrieving file: /extlinux/Image
13740544 bytes read in 1266 ms (10.4 MiB/s)
Retrieving file: /extlinux/armada-8040-clearfog-gt-8k.dtb
33368 bytes read in 31 ms (1 MiB/s)
   Booting using the fdt blob at 0x4f00000
   Loading Device Tree to 00000000bfff4000, end 00000000bffff257 ... "Synchronous Abort" handler, esr 0x96000045
elr: 000000000006e1cc lr : 0000000000068fd8 (reloc)
elr: 000000007ffa91cc lr : 000000007ffa3fd8
x0 : ffffffffffffffff x1 : 00000000bfffc258
x2 : 0000000000000000 x3 : ffffffffffff7da7
x4 : 0000000004f08258 x5 : 00000000bfff4000
x6 : 00000000bfff4000 x7 : 000000000000000f
x8 : 000000007fb23bf8 x9 : 0000000000000008
x10: 00000000bffff257 x11: 00000000bffff257
x12: 0000000000000000 x13: fffffffffffff000
x14: 00000000bfff4000 x15: 0000000000000021
x16: 000000007ff7bc38 x17: 0000000000000000
x18: 000000007fb2add0 x19: 00000000bfff4000
x20: 0000000004f00000 x21: 000000000000b258
x22: 0000000058820000 x23: 0000000000000010
x24: 000000007ffe3c40 x25: 000000007fb23cb8
x26: 00000000c0000000 x27: 0000000000000000
x28: 000000007fc3fd50 x29: 000000007fb23bd0

Code: 54000061 aa0603e0 d65f03c0 38606882 (38206822)
Resetting CPU ...

Thanks to Patrice CHOTARD who directed me to the right way.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-08-27 11:26:58 -04:00
Stefan Roese
f120aa7522 board_f: Add default values for bi_dram[] in dram_init_banksize()
Remove the bi_memstart / bi_memsize assignment in setup_bdinfo() and
make sure, that bd_dram[] is always configured in the weak default
implementation of dram_init_banksize(), when CONFIG_SYS_SDRAM_BASE is
not set.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-26 09:19:28 +02:00
Stefan Roese
4963f63fe6 image: Use gd->ram_base/_size in env_get_bootm_size()
Use only gd->ram_base/_size in env_get_bootm_size() instead of bi_dram[]
in some cases and bi_memstart in others.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-26 09:19:23 +02:00
Stefan Roese
dfaf6a5797 CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Since commit 86cf1c8285 ("configs: Migrate CONFIG_NR_DRAM_BANKS") &
commit 999a772d9f ("Kconfig: Migrate CONFIG_NR_DRAM_BANKS"),
CONFIG_NR_DRAM_BANKS is always defined with a value (4 is default).
It makes no sense to still carry code that is guarded with
"#ifndef CONFIG_NR_DRAM_BANKS" (and similar). This patch removes
all these unreferenced code paths.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-08-26 09:19:16 +02:00
Usama Arif
e61b41517d avb: Make AVB independent of fastboot
AVB only uses CONFIG_FASTBOOT_BUF_ADDR from fastboot for memory.
This memory is used for assigning temporary buffers.
This can be assigned a new variable and used as CONFIG_AVB_BUF_ADDR.
This is to support future boards that support AVB but dont support
USB and therefore dont support FASTBOOT.

Signed-off-by: Usama Arif <usama.arif@arm.com>
Cc: Igor Opaniuk <igor.opaniuk@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Igor Opaniuk <igor.opaniuk@gmail.com>
[trini: Change defaults]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-24 14:11:13 -04:00
Tom Rini
d584648dad replace devfdt_get_addr_ptr() with dev_read_addr_ptr()
binman fixes for portage
 various minor fixes
 'bind' command improvements
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl9BbZcRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIreZZiQf/UVsriftmxdDz3Lvbz7Jw6UCBXbeM3UN8
 KgRxVll3kurZeu8bIcjAPY4YRrbWRqSXmZTXpZWgbyZzHLM4RnkamY3KF3DoxPjc
 cbskd/fr4nPjSZVFrkzrvD+D5bhm+VrMtf861AkbAqqpG+Q1FmWHgApqOL1fXn3s
 2VoMxRz8Cn9KkSDmxaCtJnLX77GVYYdfgii7RuNWGDqr3eBWrzflV38VbPHLplEg
 VLqaLBe3G4zVwElA9Nc2hXpZB84KZEETHcBnmCzNkrSYTN2ofvSeZrWbtRztQFhz
 yKur1y7jFsryRkMfxBzgldsKFRNnPT9vr+0qGtrztHjCmvhDkx1YMg==
 =iDRJ
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-22aug20' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm

replace devfdt_get_addr_ptr() with dev_read_addr_ptr()
binman fixes for portage
various minor fixes
'bind' command improvements
2020-08-23 16:06:38 -04:00
Simon Glass
4225f2f520 stdio: Tidy up the coding style
Bring the coding style in this file up to the current level.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-23 13:43:10 -04:00
Simon Glass
18c587d099 stdio: Drop brackets around &devs.list
These brackets are not needed. Drop them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-23 13:43:10 -04:00
Simon Glass
5d4b6b1748 stdio: Update to use compiler for Kconfig checks
Drop use of the preprocessor where possible.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-23 13:43:10 -04:00
Simon Glass
3ca0609adc stdio: Tidy up use of CONFIG_SYS_DEVICE_NULLDEV
Now that this is in Kconfig we can move the logic at the top of the file
to Kconfig, and use if() instead of #if. Update the file with these
changes.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-23 13:43:10 -04:00
Simon Glass
7e15638d60 Convert CONFIG_SYS_DEVICE_NULLDEV to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_DEVICE_NULLDEV

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-23 13:43:10 -04:00
Ovidiu Panait
78237828a3 board_f: Remove dead code from init_func_i2c
Since commit 69153988a6 ("i2c: Finish dropping use of CONFIG_I2C_HARD")
init_func_i2c is wrapped only by "#if defined(CONFIG_SYS_I2C)". Because
of this, the second ifdef within becomes pointless:

 #if defined(CONFIG_SYS_I2C)
 static int init_func_i2c(void)
 <snip>
     #ifdef CONFIG_SYS_I2C
         ...
     #else
         ...
     #endif
 <snip>
 }
 #endif

Remove the dead #else preprocessor code.

Fixes: 69153988a6 ("i2c: Finish dropping use of CONFIG_I2C_HARD")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-22 08:54:51 -06:00
Anastasiia Lukianenko
722bc5b5d9 xen: pvblock: Add initial support for para-virtualized block driver
Add initial infrastructure for Xen para-virtualized block device.
This includes compile-time configuration and the skeleton for
the future driver implementation.
Add new class UCLASS_PVBLOCK which is going to be a parent for
virtual block devices.
Add new interface type IF_TYPE_PVBLOCK.

Implement basic driver setup by reading XenStore configuration.

Signed-off-by: Andrii Anisov <andrii_anisov@epam.com>
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
2020-08-14 15:18:30 -04:00
Oleksandr Andrushchenko
486544161f xen: Port Xen hypervisor related code from mini-os
Port hypervisor related code from Mini-OS. This is referencing the code
of Mini-OS from [1] by Huang Shijie and Volodymyr Babchuk which is for
ARM64.
Update essential arch code to support required bit operations, memory
barriers etc.

Copyright for the bits ported belong to at least the following authors,
please see related files for details:

Copyright (c) 2002-2003, K A Fraser
Copyright (c) 2005, Grzegorz Milos, gm281@cam.ac.uk,Intel Research Cambridge
Copyright (c) 2014, Karim Allah Ahmed <karim.allah.ahmed@gmail.com>

[1] - https://github.com/zyzii/mini-os.git

Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
[trini: Drop wmb() from musb-net/linux-compat.h now]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-14 15:18:30 -04:00
Pragnesh Patel
313981c2d9 common/board_f: make sure to call fix_fdt() before reserve_fdt()
There may be a chance that board specific fix_fdt() will change the
size of FDT blob so it's safe to call reserve_fdt() after fix_fdt()
otherwise global data (gd) will overwrite with FDT blob values.

Fixes: a8492e25ac ("riscv: Expand the DT size before copy reserved memory node")

Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
2020-08-14 14:39:47 +08:00
Faiz Abbas
39388aebed spl: usb: Only init usb once
usb_init() may be called multiple times for fetching multiple images
from SPL. Skip reinitializing USB if its already been done

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-08-11 20:34:46 +05:30
Faiz Abbas
c3ab97c1dd spl: usb: Create an API spl_usb_load()
Create a new API spl_usb_load() that takes the filename as a parameter
instead of taking the default U-boot PAYLOAD_NAME

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2020-08-11 20:34:46 +05:30
Joao Marcos Costa
c510061303 fs/squashfs: new filesystem
Add support for SquashFS filesystem. Right now, it does not support
compression but support for zlib will be added in a follow-up commit.

Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
2020-08-07 22:31:32 -04:00
Simon Glass
bd34715599 console: Always define the console-recording functions
On boards without console recording these function are currently missing.
It is more convenient for them to be present but to return dummy values.
That way if we know that a test needs recording, we can check if it is
available, and skip the test if not, while avoiding #ifdefs.

Update the header file according and adjust console_record_reset_enable()
to return an error if recording is not available.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-07 22:31:32 -04:00
Ovidiu Panait
276b6c943a common/board_r: Move blkcache_init call earlier in the boot sequence
blkcache_init manually relocates blkcache list pointers when
CONFIG_NEEDS_MANUAL_RELOC is enabled. However, it is called very late in
the boot sequence, which could be a problem if previous boot calls execute
blkcache operations with the non-relocated pointers. For example, mmc is
initialized earlier and might call blkcache_invalidate (in
mmc_select_hwpart()) when trying to load the environment from mmc via
env_load().

To fix this issue, move blkcache_init boot call earlier, before mmc gets
initialized.

Acked-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Tested-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-06 18:08:47 -04:00
Ovidiu Panait
365af27f0d blkcache: Extend blkcache_init to cover CONFIG_NEEDS_MANUAL_RELOC
Extend manual relocation of block_cache list pointers to all platforms that
enable CONFIG_NEEDS_MANUAL_RELOC. Remove m68k-specific checks and provide a
single implementation that adds gd->reloc_off to the pre-relocation
pointers.

Acked-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Tested-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Eric Nelson <eric@nelint.com>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
[trini: Add guard around DECLARE_GLOBAL_DATA_PTR to avoid size growth]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-06 18:08:22 -04:00
Ovidiu Panait
bf2fb81ad3 common/board_r: Remove initr_serial wrapper
Remove the initr_serial->serial_initialize indirection and call
serial_initialize directly.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-06 14:27:27 -04:00
Ovidiu Panait
1532885c45 board_f: Remove setup_board_part1
Now that all arch specific code was converted to setup_bdinfo, we can
remove setup_board_part1.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-06 14:26:35 -04:00
Ovidiu Panait
f1e504a3ea board_f: ppc: Factor out ppc-specific bdinfo setup
Factor out ppc-specific bdinfo setup from generic init sequence to
arch_setup_bdinfo in arch/powerpc/lib/bdinfo.c.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-06 14:26:35 -04:00
Ovidiu Panait
ee9c3adc85 board_f: m68k: Factor out m68k-specific bdinfo setup
Factor out m68k-specific bdinfo setup to arch_setup_bdinfo in
arch/m68k/lib/bdinfo.c. Also, use if(IS_ENABLED()) instead of #ifdef where
possible.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-06 14:26:35 -04:00
Ovidiu Panait
4912224216 board_f: Move sram bdinfo assignments to generic code
Move sram related bdinfo from arch-specific setup_board_part1 to generic
code in setup_bdinfo. Also use "if (IS_ENABLED(CONFIG_SYS_HAS_SRAM))"
instead of "#ifdef CONFIG_SYS_SRAM_BASE".

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-06 14:26:35 -04:00
Ovidiu Panait
a4aa188948 board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo
Move all assignments to gd->bd->bi_mem{start,size} to generic code in
setup_bdinfo.

Xtensa architecture is special in this regard as it defines its own
handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining
a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags.

For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is
not needed anymore.

Also, use gd->ram_base to populate bi_memstart to avoid an ifdef.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Acked-by: Alexey Brodkin <abrokdin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-06 14:26:35 -04:00
Ovidiu Panait
81e7cb1e71 board_f: Introduce arch_setup_bdinfo initcall
Certain architectures (ppc, mips, sh, m68k) use setup board_part1 and
setup_board_part2 calls during pre-relocation init to populate gd->bd
boardinfo fields. This makes the generic init sequence cluttered with
arch-specific ifdefs.

In order to clean these arch-specific sequences from generic init,
introduce arch_setup_bdinfo weak initcall so that everyone can define their
own bdinfo setup routines.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-06 14:26:35 -04:00
Ovidiu Panait
ba7431031f board_f: Introduce setup_bdinfo initcall
Introduce setup_bdinfo initcall as a generic routine to populate bdinfo
fields.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-06 14:26:35 -04:00
Jonas Smedegaard
44758771ee arm: move CONFIG_PREBOOT="usb start" to KConfig
This commit moves CONFIG_PREBOOT="usb start" to common/KConfig
for all boards also declaring USB_KEYBOARD.

Besides simplifying defconfig files, this also enables support for
board-specific CONFIG_PREBOOT for sunxi boards:
commit 37304aaf60 ("Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to
Kconfig") intended to support CONFIG_PREBOOT, but
include/configs/sunxi-common.h hardcodes preboot as part of internally
defined CONSOLE_STDIN_SETTINGS, silently ignoring any board-specific
CONFIG_PREBOOT.

Signed-off-by: Jonas Smedegaard <dr@jones.dk>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Series-Cc: Jagan Teki <jagan@amarulasolutions.com>
Series-Cc: Lukasz Majewski <lukma@denx.de>
Series-Cc: Andre Przywara <andre.przywara@arm.com>
2020-08-04 23:30:02 -04:00
Simon Glass
f38a29997d spi: Allow separate control of SPI_FLASH_TINY for SPL/TPL
In some cases SPL needs to be able to erase but TPL just needs to read.
Allow these to have separate settings for SPI_FLASH_TINY.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03 22:19:54 -04:00
chenshuo
6e31458435 find dtb in android boot image with header version 2 during bootm
This patch is about bootm process, android boot image and device tree.

Android 10 updates the boot image header to version 2,
which includes a section to store the device tree blob (DTB) image.

include/android_image.h has updated the struct andr_img_hdr,
but not used in bootm process. This patch avoid reporting
"Device tree not found or missing FDT support"
when bootm a correctly constructed android boot image.

Signed-off-by: chenshuo <chenshuo@eswin.com>
2020-07-28 19:30:39 -06:00
Adam Ford
acc415ac60 Convert CONFIG_SYS_MMCSD_FS_BOOT_PARTITION to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MMCSD_FS_BOOT_PARTITION

Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28 16:18:10 -04:00
Adam Ford
3879106414 Convert CONFIG_SPL_NAND_BASE et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SPL_NAND_BASE
   CONFIG_SPL_NAND_IDENT

Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28 16:18:10 -04:00
Adam Ford
0c4a63438c Convert CONFIG_SPL_NAND_DRIVERS et al to Kconfig
This converts the following to Kconfig:
   CONFIG_SPL_NAND_DRIVERS
   CONFIG_SPL_NAND_ECC
   CONFIG_SPL_NAND_SIMPLE

Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28 16:18:10 -04:00
Tom Rini
8d1fc6fb89 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- Bug fixes and updates on ls2088a,ls1028a, ls1046a, ls1043a, ls1012a
- lx2-watchdog support
- layerscape: pci-endpoint support, spin table relocation fixes and
  cleanups
- fsl-crypto: RNG support and bug fixes
2020-07-27 15:18:15 -04:00
Xiaowei Bao
fd00c53fb3 pci_ep: Add the init function
Some EP deivces need to initialize before RC scan it, e.g. NXP
layerscape platform, so add the init function in pci_ep uclass.

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27 14:24:15 +05:30
Masahiro Yamada
7d8073e7cf fdt_support: skip MTD node with "disabled" in fdt_fixup_mtdparts()
Currently, fdt_fixup_mtdparts() only checks the compatible property.
It is pointless to fix up the disabled node.

Skip the node if it has the property:

  status = "disabled"

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-25 14:46:57 -06:00
Masahiro Yamada
53a896649a fdt_support: call mtdparts_init() after finding MTD node to fix up
Platform code can call fdt_fixup_mtdparts() in order to hand U-Boot's
MTD partitions over to the Linux device tree.

Currently, fdt_fixup_mtdparts() calls mtdparts_init() in its entry.
If no target MTD device is found, an error message like follows is
displayed:

    Device nand0 not found!

This occurs when the same code (e.g. arch/arm/mach-uniphier/fdt-fixup.c)
is shared among several boards, but not all of them support an MTD device.

Parse the DT first, then call mtdparts_init() only when the target MTD
node is found.

Yet, you still need to call mtdparts_init() before device_find().

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-25 14:46:57 -06:00
Masahiro Yamada
8ce8e42e86 fdt_support: add static to fdt_node_set_part_info()
This function is only called from fdt_fixup_mtdpart() in the same file.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-25 14:46:57 -06:00
Philippe Reynes
e8781dcc89 lib: libfdt: fdt_region: avoid NULL pointer access
The function fdt_find_regions look in the exclude list for each
property, even if the name is NULL. It could happen if the fit
image is corrupted. On sandbox, it generates a segfault.

To avoid this issue, if the name of a property is NULL, we report
an error and avoid looking in the exclude list.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-25 14:46:57 -06:00
Tom Rini
ada61f1ee2 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscv
- Fix SiFive HiFive Unleashed board booting failure problem.
- Enable SiFive fu540 PWM driver.
- Support SiFive fu540: SPI boot.
- Update OpenSBI used for RISC-V CI testing.
- Revert "riscv: Allow use of reset drivers".
- Revert "Revert "riscv: sifive: fu540: Add gpio-restart support"".
- sysreset: syscon:
        - Don't assume default value for offset and mask property.
        - Support value property.
- qemu: Add syscon reboot and poweroff support.
- Fix SIFIVE debug serial dependency.
- Fix linking error when building u-boot-spl with no SMP support.
- AE350 use fdtdec_get_addr_size_auto_noparent to parse smc reg.
- Make memory node available to SPL in hifive-unleashed-a00-u-boot.dtsi
- SiFive fu540 avoid using hardcoded ram base and size.
2020-07-24 08:43:08 -04:00
Tom Rini
7208396bbf Revert "Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dm"
This reverts commit 5d3a21df66, reversing
changes made to 56d37f1c56.

Unfortunately this is causing CI failures:
https://travis-ci.org/github/trini/u-boot/jobs/711313649

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-24 08:42:06 -04:00
Bin Meng
a0018fc820 riscv: Make SiFive HiFive Unleashed board boot again
Commit 40686c394e ("riscv: Clean up IPI initialization code")
caused U-Boot failed to boot on SiFive HiFive Unleashed board.

The codes inside arch_cpu_init_dm() may call U-Boot timer APIs
before the call to riscv_init_ipi(). At that time the timer register
base (e.g.: the SiFive CLINT device in this case) is unknown yet.

It might be the name riscv_init_ipi() that misleads people to only
consider it is related to IPI, but in fact the timer capability is
provided by the same SiFive CLINT device that provides the IPI.
Timer capability is needed for both UP and SMP.

Considering that the original refactor does have benefits, that it
makes the IPI code more similar to U-Boot initialization idioms.
It also removes some quite ugly macros. Let's do the minimal revert
instead of a complete revert, plus a fixes to arch_cpu_init_dm() to
consider the SPL case.

Fixes: 40686c394e ("riscv: Clean up IPI initialization code")
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Tested-by: Leo Liang <ycliang@andestech.com>
2020-07-24 14:55:04 +08:00
Tom Rini
5d3a21df66 binman support for FIT
new UCLASS_SOC
 patman switch 'test' command
 minor fdt fixes
 patman usability improvements
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl8V+WQRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIrebNgAgAmgHHPakg1fkJT8xZkbPD53r21t5fkF7h
 JTLVU93BKfC+Zz2bbizCEkCl9L9bdHSaSzJY5rb07E24yV/zwDcIkRApCmkDjVHN
 EHOb0P36Ht9acowSd5kN66wd2z0Q/V+7lfEdB6Adtprh0vVaWIKYtLPxogpRv6k9
 l/CaGsBCwvupmPeHZcE3pVQlflbKyYzp62VObEBI4RIJLisvDXaPRUcBa4vz904P
 yu0baIYW8hWBcZhb0Lkex/9x7ys2T1bnnw8G7WL05GtHSZfVvT46Y70o+3i5ycBh
 GAI93Lx4r1gCjol9LVE4i1bewbPiMqyNXOtKGPRt/IIvYI4HZ67lFA==
 =YIpM
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dm

binman support for FIT
new UCLASS_SOC
patman switch 'test' command
minor fdt fixes
patman usability improvements
2020-07-23 15:56:06 -04:00
Heinrich Schuchardt
bf758125d8 efi_loader: returning from UEFI FIT images
Do not reset the board when returning from an UEFI FIT image.

For failed UEFI binary we already print the return status in efi_run_image.
Remove duplicate output.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-22 12:32:42 +02:00
Masahiro Yamada
6ec7545b99 fdt_support: skip MTD node with "disabled" in fdt_fixup_mtdparts()
Currently, fdt_fixup_mtdparts() only checks the compatible property.
It is pointless to fix up the disabled node.

Skip the node if it has the property:

  status = "disabled"

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-20 11:37:47 -06:00
Masahiro Yamada
245ad6c4ad fdt_support: call mtdparts_init() after finding MTD node to fix up
Platform code can call fdt_fixup_mtdparts() in order to hand U-Boot's
MTD partitions over to the Linux device tree.

Currently, fdt_fixup_mtdparts() calls mtdparts_init() in its entry.
If no target MTD device is found, an error message like follows is
displayed:

    Device nand0 not found!

This occurs when the same code (e.g. arch/arm/mach-uniphier/fdt-fixup.c)
is shared among several boards, but not all of them support an MTD device.

Parse the DT first, then call mtdparts_init() only when the target MTD
node is found.

Yet, you still need to call mtdparts_init() before device_find().

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-20 11:37:47 -06:00
Masahiro Yamada
d772db3f9a fdt_support: add static to fdt_node_set_part_info()
This function is only called from fdt_fixup_mtdpart() in the same file.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-20 11:37:47 -06:00
Philippe Reynes
2a3be302d5 lib: libfdt: fdt_region: avoid NULL pointer access
The function fdt_find_regions look in the exclude list for each
property, even if the name is NULL. It could happen if the fit
image is corrupted. On sandbox, it generates a segfault.

To avoid this issue, if the name of a property is NULL, we report
an error and avoid looking in the exclude list.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-20 11:37:47 -06:00
Masahiro Yamada
b75d8dc564 treewide: convert bd_t to struct bd_info by coccinelle
The Linux coding style guide (Documentation/process/coding-style.rst)
clearly says:

  It's a **mistake** to use typedef for structures and pointers.

Besides, using typedef for structures is annoying when you try to make
headers self-contained.

Let's say you have the following function declaration in a header:

  void foo(bd_t *bd);

This is not self-contained since bd_t is not defined.

To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h>

  #include <asm/u-boot.h>
  void foo(bd_t *bd);

Then, the include direcective pulls in more bloat needlessly.

If you use 'struct bd_info' instead, it is enough to put a forward
declaration as follows:

  struct bd_info;
  void foo(struct bd_info *bd);

Right, typedef'ing bd_t is a mistake.

I used coccinelle to generate this commit.

The semantic patch that makes this change is as follows:

  <smpl>
  @@
  typedef bd_t;
  @@
  -bd_t
  +struct bd_info
  </smpl>

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-07-17 09:30:13 -04:00
Thomas Schaefer
ea5003ad66 spl: fix ext4fs_mount return code handling
- Despite other ext4 filesystem functions, ext4fs_mount returns
  0 in case of error.
- This leads to u-boot crash in case that an SD card
  with valid partition table but without ext4 filesystem created
  in a partition is found on SD card.
- Fix this by returning a proper error code of '-1' from spl_load_image_ext
  function in case of ext4fs_mount error.

Signed-off-by: Thomas Schaefer <thomas.schaefer@kontron.com>
[hthiery: slightly reword the commit message]
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-17 08:51:01 -04:00
Tero Kristo
fbde7589ce common: bootm: add checks to verify if ramdisk / fdtimage overlaps OS image
These cases are typically fatal and are difficult to debug for random
users. Add checks for detecting overlapping images and abort if overlap
is detected.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-07-17 08:51:01 -04:00
Tero Kristo
19c6808d87 image: fdt: bail out with error if no boot time FDT image found
Currently the boot continues if the FDT image is clearly corrupted,
which just causes the loaded OS to hang. Abort boot properly if the FDT
is corrupted.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-07-17 08:51:01 -04:00
Heinrich Schuchardt
dde173a204 log: use BIT() instead of 1 <<
Use the BIT() macro when creating a bitmask for the logging fields.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-09 18:57:22 -06:00
Heinrich Schuchardt
3c21d7738a log: don't show function by default
The name of the function emitting a log message may be of interest for a
developer but is distracting for normal users. See the example below:

    try_load_entry() Booting: Debian

Make the default format for log messages customizable. By default show
only the message text.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-09 18:57:22 -06:00
Heinrich Schuchardt
6c9e417549 log: uclass_get_name() depends on CONFIG_SPL_DM
If CONFIG_SPL_DM=n and CONFIG_SPL_LOG=y a build error occurs:

ld.bfd: common/built-in.o: in function `log_get_cat_name':
common/log.c:48: undefined reference to `uclass_get_name'
make[1]: *** [scripts/Makefile.spl:422: spl/u-boot-spl] Error 1

Call uclass_get_name() only if DM is enabled.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-09 18:57:22 -06:00
Simon Glass
493a4c8af7 console: Add a way to output to serial only
In the video drivers it is useful to print errors while debugging but
doing so risks an infinite loop as the debugging info itself may go
through the video drivers.

Add a new console function that prints information only to the serial
device, thus making it safe for use in debugging.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09 12:33:24 +08:00
Simon Glass
a33a824227 command: Drop #ifdef for MEM_SUPPORT_64BIT_DATA
This is defined only when __lp64__ is defined. That means that ulong is
64 bits long. Therefore we don't need to use a separate u64 type on those
architectures.

Fix up the code to take advantage of that, removing the preprocessor
conditions.

Also include the header file that defines MEM_SUPPORT_64BIT_DATA. It is
included by env.h in this file, but that might not last forever.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-08 17:21:46 -04:00
Simon Glass
3428faf23a Update MEM_SUPPORT_64BIT_DATA to be always defined
Define this macro always so we don't need the preprocessor to check it.
Convert the users to #if instead of #ifdef.

Note that '#if MEM_SUPPORT_64BIT_DATA' does not give an error if the
macro is not define. It just assumes zero.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-07-08 17:21:46 -04:00
Dario Binacchi
84dd190244 spl: fit: improve spl_nand_fit_read(...) readability
Replacing the ret variable with err and handling first the error
condition about the value returned by the spl_nand_fit_read routine,
improves the code readability.
Furthermore, the 'else' int the 'else return ret' instruction was
useless.

cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dariobin@libero.it>
2020-07-08 17:21:46 -04:00
Dario Binacchi
9f6a14c47f spl: fit: nand: fix fit loading in case of bad blocks
The offset at which the image to be loaded from NAND is located is
retrieved from the itb header. The presence of bad blocks in the area
of the NAND where the itb image is located could invalidate the offset
which must therefore be adjusted taking into account the state of the
sectors concerned.

cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
2020-07-08 17:21:46 -04:00
Dario Binacchi
585b468a8c spl: fit: fail fit loading in case of FDT appending error
If uboot does not embed its device tree and the FIT loading function
returns error in case of failure in the FDT append, the redundant itb
image could be loaded.

cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-08 17:21:46 -04:00
Robert Marko
26073f9ed3 image: Add support for ZSTD decompression
This patch adds support for ZSTD decompression of FIT images.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-07-07 15:37:13 -04:00
Oleksandr Andrushchenko
53007fc1eb common/board_f: Respect original FDT size while relocating
While relocating FDT we reserve some memory for the new FDT and
set the size of the FDT with that respect. But FDT may be placed
at the end of the RAM leading to memory access beyond it.
Fix this by copying exact FDT size bytes, not the reserved size.

Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-07 09:45:07 -04:00
Patrick Delaunay
27b5b9ec93 video: restore CONFIG_VIDCONSOLE_AS_LCD as boolean
This patch restores CONFIG_VIDCONSOLE_AS_LCD as boolean
and introduce a separate sting as CONFIG_VIDCONSOLE_AS_NAME
to search this string in stdout used as videoconsole.

This patch avoid issue with board defconfig or code expecting
CONFIG_VIDCONSOLE_AS_LCD as boolean.

Fixes: 22b897a123 ("video: extend stdout video console work-around for 'vga'")
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-06 16:30:00 -04:00
Tom Rini
6e7d7aa2e2 Merge branch 'next'
Merge all outstanding changes from the current next branch in now that
we have released.
2020-07-06 15:46:38 -04:00
Sean Anderson
7984922fb2 riscv: sbi: Add newline to error message
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-07-02 10:02:57 +08:00
Sean Anderson
40686c394e riscv: Clean up IPI initialization code
The previous IPI code initialized the device whenever the first call was
made to a riscv_*_ipi function. This made it difficult to determine when
the IPI device was initialized. This patch introduces a new function
riscv_init_ipi. It is called once during arch_cpu_init_dm. In SPL, it is
called in spl_invoke_opensbi. Before this point, no riscv_*_ipi functions
should be called.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2020-07-01 15:01:22 +08:00
Tom Rini
5fdb3c0e7e - net: pcnet: cleanup and add DM support
- Makefile: add rule to build an endian-swapped U-Boot image
   used by MIPS Malta EL variants
 - CI: add Qemu tests for MIPS Malta
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiQkHUH+J02LLC9InKPlOlyTyXBgFAl76U4wACgkQKPlOlyTy
 XBhKeg/6Au6lPC5QLnjEO5gpuhI/eF555jRoABXUNoM8FUjkcqA207Sgd3iTH9lS
 imOGHkzwipYno5pY1UoiXr7RKJgAkJfKYWRrZ46qgITrEkgQ8Xyp46xIqhoHvpuH
 Qs1YeDllHeRViBt2ZP6UJsYfUIA9xnU/o9tLh4lx2SiCPWbNDns7cB0Ajazh47Cx
 8UT2ZwbATaaFfN9m4Lg65O6Fe1G/cHAw5H/xsDajpVOpskHk0RZxRxzob6XLQete
 sVkZdjYmH7zG+7THLkPriu2y/qlc5t2re3OeAr/5YwYJODnj3aN7iI20Sl9xMwDP
 eDcSt19HMs+Ng60+yqwHxoU+AQ2BjswYHssb2vdY8OQhlRpoFke6nT+oQtCQCYhZ
 At/b2O8kh9IM9alsc8xltMABLgrOhREfxC6VQg7bsCH01+qcojGX8dhVQrYsWkKQ
 GrCs6SAl8zR78j8s3OGSsvTczMkTrBTglYWIYrlvA5fFhVg5Yz38S+ioTqPc4QDc
 ZJ9bDDO00CY4hJC8sx4TQcsn0OmSJeN394dy6CUoxL6fEXBdRmNRLBUnmuTmPmYT
 suLB9qaG+Q6cEttXjfNN1VotSG+61COUZ0uoed47cGUo8AxLMTEe62twUc0aDPNS
 NMUoMwHqVbivaGUBfG16mu8bnVfaCqFyR/LLGa6J3yQSQ8qeu30=
 =dnTK
 -----END PGP SIGNATURE-----

Merge tag 'mips-pull-2020-06-29' of https://gitlab.denx.de/u-boot/custodians/u-boot-mips into next

- net: pcnet: cleanup and add DM support
- Makefile: add rule to build an endian-swapped U-Boot image
  used by MIPS Malta EL variants
- CI: add Qemu tests for MIPS Malta
2020-06-30 11:43:18 -04:00
Lukasz Majewski
56c4046038 spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI*
This change allows more fine tuning of driver model based SPI support in
SPL and TPL. It is now possible to explicitly enable/disable the DM_SPI
support in SPL and TPL via Kconfig option.

Before this change it was necessary to use:
    /* SPI Flash Configs */
    #if defined(CONFIG_SPL_BUILD)
    #undef CONFIG_DM_SPI
    #undef CONFIG_DM_SPI_FLASH
    #undef CONFIG_SPI_FLASH_MTD
    #endif

in the ./include/configs/<board>.h, which is error prone and shall be
avoided when we strive to switch to Kconfig.

The goal of this patch:

Provide distinction for DM_SPI support in both U-Boot proper and SPL (TPL).
Valid use case is when U-Boot proper wants to use DM_SPI, but SPL must
still support non DM driver.

Another use case is the conversion of non DM/DTS SPI driver to support
DM/DTS. When such driver needs to work in both SPL and U-Boot proper, the
distinction is needed in Kconfig (also if SPL version of the driver
supports OF_PLATDATA).

In the end of the day one would have to support following use cases (in
single driver file - e.g. mxs_spi.c):

- U-Boot proper driver supporting DT/DTS
- U-Boot proper driver without DT/DTS support (deprecated)
- SPL driver without DT/DTS support
- SPL (and TPL) driver with DT/DTS (when the SoC has enough resources to
  run full blown DT/DTS)
- SPL driver with DT/DTS and SPL_OF_PLATDATA (when one have constrained
  environment with no fitImage and OF_LIBFDT support).

Some boards do require SPI support (with DM) in SPL (TPL) and some only
have DM_SPI{_FLASH} defined to allow compiling SPL.

This patch converts #ifdef CONFIG_DM_SPI* to #if CONFIG_IS_ENABLED(DM_SPI)
and provides corresponding defines in Kconfig.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Adam Ford <aford173@gmail.com> #da850-evm
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
[trini: Fixup a few platforms]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-29 13:34:43 -04:00
Ye Li
70b06d9542 splash: Fix build warning on 64 bits CPU
Get below warning on ARM64 platform, because the bmp_load_addr
is defined to u32.

common/splash.c: In function ‘splash_video_logo_load’:
common/splash.c:74:9: warning: cast to pointer from integer
of different size [-Wint-to-pointer-cast]
   74 |  memcpy((void *)bmp_load_addr, bmp_logo_bitmap,

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # bpi-m1+, bpi-m64
2020-06-28 01:03:09 +02:00
Simon Glass
32d0b2dfe5 bdinfo: net: ppc: Drop bi_enet1addr and other similar info
These values were 'old' in 2013 so it should be safe to remove them. They
are never set in U-Boot anyway, so the values will always be zero.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-06-25 13:24:12 -04:00
Tom Rini
f0e236c8d6 Xilinx changes for v2020.10
Versal:
 - xspi bootmode fix
 - Removing one clock from clk driver
 - Align u-boot memory setting with OS by default
 - Map TCM and OCM by default
 
 ZynqMP:
 - Minor DT improvements
 - Reduce console buffer for mini configurations
 - Add fix for AMS
 - Add support for XDP platform
 
 Zynq:
 - Support for AES engine
 - Enable bigger memory test by default
 - Extend documentation for SD preparation
 - Use different freq for Topic miami board
 
 mmc:
 - minor GD pointer removal
 
 net:
 - Support fixed-link cases by zynq gem
 - Fix phy looking loop in axi enet driver
 
 spi:
 - Cleanup global macros for xilinx spi drivers
 
 firmware:
 - Add support for pmufw reloading
 
 fpga:
 - Improve error status reporting
 
 common:
 - Remove 4kB addition space for FDT allocation
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXvScEQAKCRDKSWXLKUoM
 IeHUAJ9Z1shAlbILuHZKEpqQySLHdUVgBQCff8Nf+wi1rByTrwflKt14MtIsdFY=
 =2Yuu
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2020.10' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2020.10

Versal:
- xspi bootmode fix
- Removing one clock from clk driver
- Align u-boot memory setting with OS by default
- Map TCM and OCM by default

ZynqMP:
- Minor DT improvements
- Reduce console buffer for mini configurations
- Add fix for AMS
- Add support for XDP platform

Zynq:
- Support for AES engine
- Enable bigger memory test by default
- Extend documentation for SD preparation
- Use different freq for Topic miami board

mmc:
- minor GD pointer removal

net:
- Support fixed-link cases by zynq gem
- Fix phy looking loop in axi enet driver

spi:
- Cleanup global macros for xilinx spi drivers

firmware:
- Add support for pmufw reloading

fpga:
- Improve error status reporting

common:
- Remove 4kB addition space for FDT allocation
2020-06-25 09:33:39 -04:00
Ashok Reddy Soma
b8fd54d62f common: fdt: Remove additional 4k space for fdt allocation
There is no technical reason to add additional 4k space for FDT. This space
is completely unused and just increase memory requirements. This is
problematic on systems with limited memory resources as Xilinx Zynq
CSE/ZynqMP mini and Versal mini configurations.

The patch is removing additional 4k space.

EFI code is using copy_fdt() which copy FDT to different location.
And all boot commands in case of using U-Boot's FDT pointed by
$fdtcontroladdr are copying FDT to different locations by
image_setup_libfdt().
That's why in proper flow none should modified DTB used by U-Boot that's
why there is no need for additional space.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2020-06-25 10:09:32 +02:00
Anatolij Gustschin
22b897a123 video: extend stdout video console work-around for 'vga'
cfb_console driver uses 'vga' console name and we still have board
environments defining this name. Re-use existing DM_VIDEO work-
around for console name to support 'vga' name in stdout environment.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Tested-by: Soeren Moch <smoch@web.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-06-18 19:30:14 +02:00
Harald Seiler
7a81989b7b common: hash: Remove a debug printf statement
Remove a left-over debug printf that was introduced with SHA512 support.

Fixes: d16b38f427 ("Add support for SHA384 and SHA512")
Signed-off-by: Harald Seiler <hws@denx.de>
2020-06-16 11:36:30 -04:00
Tom Rini
f9e3d2e147 patman improvements to allow it to work with Zephyr
change to how sequence numbers are assigned to devices
 minor fixes and improvements
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl7kQ4kRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIreZrvAgAqc/TEj7QHPyW9rQSl8h65MXK93qRsnZo
 4segKEtK0Rmv0S2VfmPCwujsDFl5gZUNt+rXD/l7F0a4Wzx4eYgYrEXOYsXs/ZHP
 jjGrcbvO4Qkx3QzjMqqoUiQqeCgNQ9XIre8F+1NmZeQ2bFtPKbJXtXKYTcMI1wSW
 PhRGbbsTnKNKC0dL0nLFG6+NC/sk6xRqMx28Ip38FTrQL+Uh67LZFpLkY3yuHo/1
 CVhCw+7Aov0I6tDrdKrngjFqXRSoTsuOhavSFoW9U6llqDL7FIC6aoRo7x24lSJN
 VFTRpXPmNHeslE6NHEOQs9elFpbxXR34te3k4p74rFuX/J/490UaYA==
 =172C
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-12jun20' of git://git.denx.de/u-boot-dm into next

patman improvements to allow it to work with Zephyr
change to how sequence numbers are assigned to devices
minor fixes and improvements
2020-06-13 09:01:01 -04:00
Reuben Dowle
d16b38f427 Add support for SHA384 and SHA512
The current recommendation for best security practice from the US government
is to use SHA384 for TOP SECRET [1].

This patch adds support for SHA384 and SHA512 in the hash command, and also
allows FIT images to be hashed with these algorithms, and signed with
sha384,rsaXXXX and sha512,rsaXXXX

The SHA implementation is adapted from the linux kernel implementation.

[1] Commercial National Security Algorithm Suite
http://www.iad.gov/iad/programs/iad-initiatives/cnsa-suite.cfm

Signed-off-by: Reuben Dowle <reuben.dowle@4rf.com>
2020-06-12 13:14:07 -04:00
Heinrich Schuchardt
7b6c34cb15 log: clean up Kconfig
LOG_DEFAULT_LEVEL has been chosen as 6. Adjust the default of LOG_MAX_LEVEL
to this value.

Use ranges to clamp log levels to reasonable values.

Group output options by main U-Boot, SPL, TPL, followed by other logging
options.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-06-11 20:52:11 -06:00
Jagan Teki
819da86d52 sifive: fu540: Add U-Boot proper sector start
Add U-Boot proper sector start offset for SiFive FU540.
This value is based on the partition layout supported
by SiFive FU540.

u-boot.itb need to write on this specific offset so-that
the SPL will retrieve it from here and load.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-06-04 09:44:09 +08:00
Christian Gmeiner
95712afc17 image: android: fix abootimg support
abootimg creates images where all load addresses are 0.

 Android Boot Image Info:
* file name = artifacts/fastboot.img
* image size = 31381504 bytes (29.93 MB)
  page size  = 2048 bytes
* Boot Name = ""
* kernel size       = 9397406 bytes (8.96 MB)
  ramdisk size      = 21981144 bytes (20.96 MB)
* load addresses:
  kernel:       0x00000000
  ramdisk:      0x00000000
  tags:         0x00000000

Without this fix we end in a data abort:

Booting kernel at 0x15000000...
*  kernel: cmdline image address = 0x15000000
Kernel load addr 0x00000000 size 9178 KiB
Kernel command line: ip=dhcp console=ttymxc0,115200n8
   kernel data at 0x15000800, len = 0x008f649e (9397406)
*  ramdisk: cmdline image address = 0x15000000
RAM disk load addr 0x00000000 size 21473 KiB
   ramdisk start = 0x158f7000, ramdisk end = 0x16def35c
   kernel loaded at 0x00000000, end = 0x00000000
   Loading Kernel Image
data abort
pc : [<8ff8c004>]	   lr : [<5d7ac70f>]
sp : 8f57ed64  ip : 48f17668	 fp : 00000000
r10: 00000002  r9 : 8f58aed0	 r8 : 03fa4c58
r7 : 5e842497  r6 : fbe73965	 r5 : 7c459955  r4 : df020fde
r3 : 1b7aa45b  r2 : 007f23fe	 r1 : 15104820  r0 : 00104000
Flags: nzCv  IRQs off  FIQs off  Mode SVC_32 (T)
Code: f07c e8b1 51f8 3a20 (e8a0) 51f8
Resetting CPU ...
resetting ...

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2020-06-02 13:06:12 -04:00
Heiko Stuebner
a343b4fe73 spl: add fixed memory node in target fdt also when loading ATF
In a loading chain SPL -> ATF (->OP-TEE) -> U-Boot, ATF and a subsequent
OP-TEE will re-use the same fdt as the U-Boot target and may need the
information about usable memory ranges.

Especially OP-TEE needs this to initialize dynamic shared memory
(the only type U-Boot implements when talking to OP-TEE).

So allow spl_fixup_fdt() to take a fdt_blob argument, falling back to
the existing CONFIG_SYS_SPL_ARGS_ADDR if needed and call it from the
ATF path as well.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2020-05-31 22:22:07 +08:00
Tom Rini
b0b13f4114 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- Add DM_ETH support for lx2160aqds, ls2080aqds, ls1088aqds
- QSI related fixes on ls1012a, ls2080a, ls1046a, ls1088a, ls1043a based
  platforms
- Bug-fixes/updtaes related to ls1046afrwy, fsl-mc, msi-map property
2020-05-20 08:46:56 -04:00
Pankit Garg
62d3a58dce board_r: Detect ifc-nor flash at run-time
CONFIG_MTD_NOR_FLASH flag needs to be enable for all
boot sources,as all flash drivers need to compile in
TFA Boot.Probe ifc nor flash only when there is nor
flash available on board.So needs to detect ifc-nor
flash at run-time for probing.

Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19 09:22:08 +05:30
Simon Glass
cd93d625fd common: Drop linux/bitops.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
c05ed00afb common: Drop linux/delay.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
eb41d8a1be common: Drop linux/bug.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
25a5818ff8 common: Drop asm/ptrace.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
f7ae49fc4f common: Drop log.h from common header
Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:18 -04:00
Simon Glass
3c7dded8e1 Fix some checkpatch warnings in calls to debug()
Fix up some incorrect code style in calls to functions in the log.h
header, mostly debug().

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 18:36:57 -04:00
Simon Glass
0914011310 command: Remove the cmd_tbl_t typedef
We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 18:36:55 -04:00
Simon Glass
691d719db7 common: Drop init.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Simon Glass
4d72caa5b9 common: Drop image.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Simon Glass
52f2423804 common: Drop bootstage.h from common header
Move this fairly uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Simon Glass
b67eefdb6e bootstage: Use BOOTSTAGE instead of BOOTSTATE
Some of the enum members are wrong. Fix them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Simon Glass
e6f6f9e648 common: Drop part.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Simon Glass
0528979fa7 part: Drop disk_partition_t typedef
We should not be using typedefs and these make it harder to use
forward declarations (to reduce header file inclusions). Drop the typedef.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Simon Glass
90526e9fba common: Drop net.h from common header
Move this header out of the common header. Network support is used in
quite a few places but it still does not warrant blanket inclusion.

Note that this net.h header itself has quite a lot in it. It could be
split into the driver-mode support, functions, structures, checksumming,
etc.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:31 -04:00
Simon Glass
b79fdc7697 common: Drop flash.h from common header
Move this uncommon header out of the common header.

Fix up some style problems in flash.h while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 14:53:28 -04:00
Simon Glass
a595a0e910 flash: Tidy up coding style for flash functions
Some functions use the wrong code style and generate checkpatch errors.
Fix these.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 14:53:28 -04:00
Ovidiu Panait
98bf46f7bd board_r: Introduce CONFIG_PCI_INIT_R Kconfig option
With CONFIG_DM_PCI enabled, PCI buses are not enumerated at boot, as they
are without that config option enabled. However, there are cases such as DM
PCI-based Ethernet devices that need the PCI bus enumerated so that they
can be discovered by their drivers.

Currently, to solve this, some boards enumerate the pci bus using
"pci enum" preboot command, while others do it manually in board files
(in board_init/board_late_init/etc. functions).

In order to possibly make the pci enumeration process uniform across all
boards, introduce CONFIG_PCI_INIT_R Kconfig option.

This change also preserves the current behavior in the !DM_PCI case
(pci_init is run unconditionally at boot).

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-05-15 17:12:41 -04:00
Ovidiu Panait
9441f8cbfe board_r: env: Use IS_ENABLED() instead of #ifdefs
Use IS_ENABLED() instead of #ifdef in should_load_env and initr_env
functions.

No functional change intended.

Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-05-15 17:12:41 -04:00
Heinrich Schuchardt
542809620e common/board_f: avoid -Wtype-limits warning
CONFIG_SYS_SDRAM_BASE maybe zero. Avoid a build warning when compiling with
-Wtype-limits.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-15 14:47:35 -04:00
Samuel Holland
3988be5fd4 spl: Always define preloader_console_init
A large number of boards call preloader_console_init unconditionally.
Currently, they fail to build with CONFIG_SPL_SERIAL=n, because the
function is undefined in that case. To fix the build, always define
preloader_console_init, but make it no-op when CONFIG_SPL_SERIAL=n.

For the few boards that did check for CONFIG_SPL_SERIAL before calling
preloader_console_init, remove the checks, since the function can now
be called unconditionally.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-05-15 14:47:35 -04:00
Trevor Woerner
18138ab203 rename symbol: CONFIG_TEGRA -> CONFIG_ARCH_TEGRA
Have this symbol follow the pattern of all other such symbols.

Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-15 14:47:35 -04:00
Stefano Babic
b77d0292ca Merge branch 'master' of git://git.denx.de/u-boot 2020-05-10 13:03:56 +02:00
Thirupathaiah Annapureddy
5168d7a626 menu: add support for client defined statusline function
Currently displaying status line is done in a weak function
menu_display_statusline().

bootmenu.c overrides the weak default function.
It calls menu_default_choice() and interprets the data as
struct bootmenu_entry.

pxe boot also uses common menu code for pxe menus.
If there is a system that enables both bootmenu and pxe,
menu_display_statusline() defined in bootmenu.c will be called
and it will interpret struct pxe_label as struct bootmenu_entry.
This leads to data aborts and pxe menu corruptions.

This patch adds support for client defined statusline function
to resolve the above bug.

Signed-off-by: Thirupathaiah Annapureddy <thiruan@linux.microsoft.com>
2020-05-07 09:01:42 -04:00
Tom Rini
143414c03f i.MX for 2020.07
----------------
 
 - imxrt: fix LCD clock, fix doc
 - new board: Coral Dev
 - imx8: enable Cache in SPL. SNVS, update SCFW API
 - imx8MM: fix reset, 8MQ quand and QuadLite, CPU speed grading
 - MX6ULL : is_imx6ull to include i.MX6ULZ
 - Net: add config to enable TXC delay
 
 Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/682033914
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCXq07zQ8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76azngCdG7iFIXq3kg47qliAr44jIa4s/DUAnRzmSTut
 FuQlRhgXrY+Gh94FzrxN
 =MoOz
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20200502' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

i.MX for 2020.07
----------------

- imxrt: fix LCD clock, fix doc
- new board: Coral Dev
- imx8: enable Cache in SPL. SNVS, update SCFW API
- imx8MM: fix reset, 8MQ quand and QuadLite, CPU speed grading
- MX6ULL : is_imx6ull to include i.MX6ULZ
- Net: add config to enable TXC delay

Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/682033914
2020-05-04 09:29:42 -04:00
Ye Li
f5b66af2cb common: board_f: Use cpu_get_current_dev in print_cpuinfo
Current print_cpuinfo gets the first udevice in CPU class to return
the cpu info. This has problem if the boot CPU is not fixed.

Changing to use new API cpu_get_current_dev to fix the issue.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-03 15:45:49 +02:00
Sherry Sun
d8e775539e spl: sdp: Add DM gadget support for sdp
When enable CONFG_SPL_DM_USB_GADGET, sdp should use
usb_gadget_initialize() and usb_gadget_release() to
support DM gadget driver.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-03 15:31:54 +02:00
Ye Li
932c1ed328 spl: sdp: Add a callback to clean up USB driver
Because SDP directly jumps to next level boot image, we'd better
clean up the USB driver before it. Implement a weak callback function,
that spl sdp can use it to clean up USB driver.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-03 15:31:48 +02:00
Ye Li
407e3844fc spl: sdp: Add CONFIG_SPL_SDP_USB_DEV for USB device
Add a new configuration CONFIG_SPL_SDP_USB_DEV to specify the
usb index for spl sdp driver, so that we change use different device.
The default value is 0.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-03 15:31:41 +02:00
Frank Li
62597d2551 spl: sdp: call board_usb_init at spl_sdp_load_image
Need initialize UDC before run sdp download

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-03 15:31:28 +02:00
Harald Seiler
15aec318ef Revert "imx: Introduce CONFIG_SPL_FORCE_MMC_BOOT to force MMC boot on falcon mode"
The CONFIG_SPL_FORCE_MMC_BOOT config flag is not needed as its behavior
is the correct one in all cases;  using spl_boot_device() instead of the
boot_device parameter will lead to inconsistency issues, for example,
when a board_boot_order() is defined.  In fact, this is the reason the
parameter was introduced in the first place, in commit 2b1cdafa9f
("common: Pass the boot device into spl_boot_mode()").

This reverts commit 772b55723b.

Link: https://lists.denx.de/pipermail/u-boot/2020-April/405979.html
Signed-off-by: Harald Seiler <hws@denx.de>
2020-05-01 18:47:07 +02:00
Ovidiu Panait
1a4c077b75 common/board_r: Drop initr_bedbug wrapper
Drop initr_bedbug wrapper and call bedbug_init directly during the init
sequence.

Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-01 11:34:01 -04:00
Ovidiu Panait
5cf9e3b237 common/board_r: arm: Merge initr_enable_interrupts into interrupts_init
initr_enable_interrupts() is an ARM-specific wrapper over
enable_interrupts(), which is run during the common init sequence. It can
be eliminated by moving the enable_interrupts() call to the end of
interrupt_init() function, in arch/arm/lib/interrupts*.c.

Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-01 11:34:01 -04:00
Marek Bykowski
9297e366d6 malloc: dlmalloc: add an ability for the malloc to be re-init/init multiple times
Malloc gets initialized with a call to mem_malloc_init() with the address
the allocation starts to and its size. Currently it is not possible to
move the malloc from one memory area to another as the malloc would eventually
fail.

This patch adds in the ability to re-init the malloc with the updated
start address and the size.

One of the use cases of this feature is SPL U-Boot running from within
the static memory and calling to malloc init from within board_init_f():

	arch/arm/cpu/armv8/start.S:reset vector
	arch/arm/cpu/armv8/start.S:main()
	arch/arm/lib/crt0_64.S:board_init_f()
	board/<my_board>/common/spl.c:board_init_f()
        board/<my_board>/common/spl.c:mem_malloc_init((ulong)CONFIG_SYS_SPL_MALLOC_START,
                        CONFIG_SYS_SPL_MALLOC_SIZE);

Shortly after the DDR (main) memory is init and ready we call to malloc init
again but this time with the start address in the DDR memory and a much greater
size for moving the allocation off the static to the DDR memory:

	board/<my_board>/common/spl.c:mem_malloc_init((ulong)CONFIG_SPL_MALLOC_OFFSET,
			CONFIG_SPL_MALLOC_SIZE);

Where CONFIG_SYS_SPL_MALLOC_START and CONFIG_SPL_MALLOC_OFFSET are the start
addresses of the malloc in the static and DDR memories respectively and
CONFIG_SYS_SPL_MALLOC_SIZE=SZ_16K and CONFIG_SPL_MALLOC_SIZE=SZ_2M are
the sizes of the mallocs in these memories. Note, now we have a much greater
memory, enlarging from 16K to 2M, available for allocation.

There is an alternative approach already existing in U-Boot with the use of
an early (simplified) malloc and the proper (dlamalloc) malloc however
necessitating managing the two mallocs whereas this approach proposes using
a single dlmalloc.

Signed-off-by: Marek Bykowski <marek.bykowski@gmail.com>
2020-05-01 11:34:01 -04:00
Philippe Reynes
c522949a29 rsa: sig: fix config signature check for fit with padding
The signature check on config node is broken on fit with padding.
To compute the signature for config node, U-Boot compute the
signature on all properties of requested node for this config,
except for the property "data". But, when padding is used for
binary in a fit, there isn't a property "data" but two properties:
"data-offset" and "data-size". So to fix the check of signature,
we also don't use the properties "data-offset" and "data-size"
when checking the signature on config node.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-05-01 11:34:01 -04:00
Heinrich Schuchardt
f4070e6f6c hush: avoid NULL check before free()
free() checks if its argument is NULL. Don't duplicate this in the calling
code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-01 11:34:01 -04:00
Tom Rini
545c747447 Move Python tools to use absolute paths
Minor buildman fixes for new features
 Make libfdt code more similar to upsteam
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl6mTJMRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIreZRmAf/TeHuh9nWXr7jRAyl8YEaXfBablceBYF/
 l/bHpIyPy1NH5wRMB1kwGIZUydSM44/FIVnvlo1iVI0DVuO1cSIY98WM2waMP0Tk
 WiDg3XR7eMpTMNjG13KP6TrFG5ybfOopRYdpuUfjPTBm8RQyuFMziaQwOrDQdoXt
 9yQ8rzM6hB7Gj3LgORond04KZYRUcYC+uhcuDo8WPUjrqS8vSpeAG34n6lT4z9KG
 BdmhQuIybvCngdi/t9ovyTfq5UfIsXp0ngUN6My/j0IjykZT4nu6qllge8gcukCM
 3iqrqhcjkO9psPdk6NXf2akTdxDH4Mf8PqFbvqmABNQbDSEVinVnrA==
 =H2KE
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-27apr20' of git://git.denx.de/u-boot-dm

Move Python tools to use absolute paths
Minor buildman fixes for new features
Make libfdt code more similar to upsteam
2020-04-28 09:52:01 -04:00
Weijie Gao
aba6e77a30 spl: spl_legacy: Add lzma decompression support for legacy image
This patch adds support for decompressing LZMA compressed u-boot payload
in legacy uImage format.

Using this patch together with u-boot-lzma.img may be useful for some
platforms as they can reduce the size and load time of u-boot payload.

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-04-27 20:29:33 +02:00
Stefan Roese
f1b0f1550b spl: spl_nor: Remove unused variable 'ret' warning
With the if statement now for the legacy image handling, the compiler
now generates this compile time warning:

common/spl/spl_nor.c:27:6: warning: unused variable 'ret' [-Wunused-variable]

This patch removes this warning by changing the 'ret' variable handling.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Weijie Gao <weijie.gao@mediatek.com>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2020-04-27 20:29:33 +02:00
Stefan Roese
2fc91ed3ba spl: spl_nor: Move legacy image loading into spl_legacy.c
Move the legacy image loading into spl_legacy.c. This makes it easier
to extend the legacy image handling with new features that other
SPL loaders might use (e.g. spl_spi.c etc).

No functional change intended.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Weijie Gao <weijie.gao@mediatek.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2020-04-27 20:29:33 +02:00
Stefan Roese
5ae526b61f spl: spl_legacy: Use IS_ENABLED() to remove #ifdef
Use IS_ENABLED() instead of #ifdef CONFIG_ to remove one #ifdef.

No functional change intended.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Weijie Gao <weijie.gao@mediatek.com>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2020-04-27 20:29:33 +02:00
Stefan Roese
c11081729f spl: Extract legacy image handling into separate file
This patch moves the legacy image handling into a separate file, which
will be extended with other legacy image features later.

No function change intended.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Weijie Gao <weijie.gao@mediatek.com>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2020-04-27 20:29:33 +02:00
Heinrich Schuchardt
c1f39edc62 log: remove useless cast
There is no need to cast from (void *) before assigning to a pointer.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-26 14:25:21 -06:00
Masahiro Yamada
64045a6a17 libfdt: split fdt_region declarations out to <fdt_region.h>
fdt_region APIs are not part of libfdt. They are U-Boot extension
for the verified boot. Split the declarations related to fdt_region
out of <fdt_region.h>. This allows <linux/libfdt.h> to become a
simple wrapper file, like Linux does.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-26 14:24:08 -06:00
Masahiro Yamada
3e69db1223 fdt_region: move fdt_region.c to common/ from lib/libfdt/
My goal is to sync lib/libfdt/ with scripts/dtc/libfdt/, that is,
make lib/libfdt/ contain only wrapper files.

fdt_region.c was written only for U-Boot to implement the verified
boot. So, this belongs to the same group as common/fdt_support.c,
which is a collection of U-Boot own fdt helpers.

Move lib/libfdt/fdt_region.c to common/fdt_region.c . This is
necessary only when CONFIG_(SPL_TPL_)_FIT_SIGNATURE is enabled.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-26 14:23:55 -06:00
Heinrich Schuchardt
077e72c6e6 spl: fit: do not check argument of free()
The free() function checks if its argument is NULL. It is superfluous to do
the same check on the calling side.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-24 16:40:09 -04:00
Ovidiu Panait
79926e4f2f common/board_f: Make reserve_mmu generic
Introduce arch_reserve_mmu to allow for architecture-specific reserve_mmu
routines. Also, define a weak nop stub for it.

Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-24 15:17:14 -04:00
Ovidiu Panait
586b15bce8 common/board_f: Move arm-specific reserve_mmu to arch/arm/lib/cache.c
Move the ARM-specific reserve_mmu definition from common/board_f.c
to arch/arm/lib/cache.c.

Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-24 15:17:14 -04:00
Joel Johnson
67b359cf03 spl: Kconfig: de-dup SPL_DM_GPIO definition
Two nearly concurrent commits (d4d65e112 and bcee8d676) added a
SPL_DM_GPIO symbol. Resolve the duplication in favor of the version
in drivers/gpio/Kconfig.

Signed-off-by: Joel Johnson <mrjoel@lixil.net>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2020-04-24 10:51:32 -04:00
Heinrich Schuchardt
be621c11b9 dlmalloc: remove unit test support in SPL
We cannot run unit tests in SPL. So remove the unit test support.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-24 10:51:32 -04:00
Heinrich Schuchardt
6441164dda common: image_sign_info helper functions in SPL
Do not build image_sign_info helper functions in SPL if not needed.

Fixes: b983cc2da0 ("lib: rsa: decouple rsa from FIT image verification")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-04-24 10:51:32 -04:00
Bin Meng
191636e448 riscv: Introduce SPL_SMP Kconfig option for U-Boot SPL
With SBI v0.2 HSM extension, only a single hart need to boot and
enter operating system. The booting hart can bring up secondary
harts one by one afterwards.

For U-Boot running in SPL, SMP can be turned on, while in U-Boot
proper, SMP can be optionally turned off if using SBI v0.2 HSM.

Introduce a new SPL_SMP Kconfig option to support this.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
2020-04-23 10:14:06 +08:00
Tom Rini
2b63959e30 Merge tag 'mmc-2020-4-22' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmc
- iproc_sdhci memory leak fix and enable R1B resp quirk
- more mmc cmds and several mmc updates from Heinirich
- Use bounce buffer for tmio sdhci
- Alignment check for tmio sdhci
2020-04-22 08:58:41 -04:00
Harald Seiler
c51b751893 spl: mmc: Rename spl_boot_partition() to spl_mmc_boot_partition()
This function is only relevant to the MMC driver so calling it
spl_boot_partition() might be confusing.  Rename it to
spl_mmc_boot_partition() to make its purpose more clear (and bring
it in line with spl_mmc_boot_mode()).

Signed-off-by: Harald Seiler <hws@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-22 20:41:57 +08:00
Harald Seiler
e97590654a spl: mmc: Rename spl_boot_mode() to spl_mmc_boot_mode()
The function's name is misleading as one might think it is used
generally to select the boot-mode when in reality it is only used by the
MMC driver to find out in what way it should try reading U-Boot Proper
from a device (either using a filesystem, a raw sector/partition, or an
eMMC boot partition).

Rename it to spl_mmc_boot_mode() to make it more obvious what this
function is about.

Link: https://lists.denx.de/pipermail/u-boot/2020-April/405979.html
Signed-off-by: Harald Seiler <hws@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-22 20:41:57 +08:00
Marek Vasut
8074ffe335 common: bouncebuf: Permit passing custom alignment check function
Add extended version of the bounce_buffer_start(), which permits passing in
a custom alignment checker function for the buffer. This is useful e.g. on
systems with various DMA restrictions and where the checker function might
be more complex than a simple CPU cache alignment check.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
2020-04-22 20:41:56 +08:00
Atish Patra
155d6a3575 image: Add a common compression type detection function.
Currently, there is no method that can detect compression types
given a file. This is very useful where a compressed kernel image
is loaded directly to the memory.

Inspect initial few bytes to figure out compression type of the
image. It will be used in booti method for now but can be reused
any other function in future as well.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-04-17 12:32:36 -04:00
Patrick Delaunay
65c141ebbd board_f.c: Ensure 16 alignment of start_addr_sp and reserved memory
Add a function reserve_stack_aligned() to reserved memory with 16 bits
alignment after the stack pointer (gd->start_addr_sp) and use this new
function in board_f.c to reserve all the memory area (malloc, board, gd,
fdt, bootstage, stacks).

This 16 byte alignment is needed for cast on struct pointer
for the reserved memory, for example:
+ x86_64 ABI: https://reviews.llvm.org/D30049: 16 bytes
+ ARMv8 Instruction Set Overview: quad word, 16 bytes

An other alignment value could be needed for other architecture.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2020-04-16 23:06:54 -04:00
Patrice Chotard
a6651086a7 board_f.c: Ensure gd->new_bootstage alignment
In reserve_bootstage(), in case size is odd, gd->new_bootstage
is not aligned. In bootstage_relocate(), the platform hangs when
getting access to data->record[i].name.
To avoid this issue, make gd->new_bootstage 16 byte aligned.

To ensure that new_bootstage is 16 byte aligned (at least needed for
x86_64 and ARMv8) and new_bootstage starts down to get enough space,
ALIGN_DOWN macro is used.

Fixes: ac9cd4805c ("bootstage: Correct relocation algorithm")

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Vikas MANOCHA <vikas.manocha@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Tested-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16 23:06:54 -04:00
Heinrich Schuchardt
befadde0a2 log: syslog driver
Provide a log driver that broadcasts RFC 3164 messages to syslog servers.
rsyslog is one implementation of such a server.

The messages are sent to the local broadcast address 255.255.255.255 on
port 514.

The environment variable log_hostname can be used to provide the HOSTNAME
field for the messages. The optional TIMESTAMP field of RFC 3164 is not
provided.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16 08:07:58 -06:00
Heinrich Schuchardt
d1a02f53b3 log: correct CONFIG_LOG_TEST prerequisites
An error

	undefined reference to `do_log_test'

occurs for CONFIG_CMD_LOG=y, CONFIG_LOG_TEST=y, CONGIG_UNIT_TEST=n

Make CONFIG_UNIT_TEST a prerequisite.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16 08:07:57 -06:00
Tom Rini
8914831860 Merge branch 'next'
Pull in changes that have been pending in our 'next' branch.  This
includes:
- A large number of CI improvements including moving to gcc-9.2 for all
  platforms.
- amlogic, xilinx, stm32, TI SoC updates
- USB and i2c subsystem updtaes
- Re-sync Kbuild/etc logic with v4.19 of the Linux kernel.
- RSA key handling improvements
2020-04-13 11:27:00 -04:00
Simon Glass
ed49ea90b7 main: Drop show_boot_progress() prototype
This is defined in bootstage.h and is not called in this file anyway. Drop
it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-04-10 21:21:06 -04:00
Marek Vasut
31232de07e usb: Keep async schedule running only across mass storage xfers
Rather than keeping the asynchronous schedule running always, keep it
running only across USB mass storage transfers for now, as it seems
that keeping it running all the time interferes with certain control
transfers during device enumeration.

Note that running the async schedule all the time should not be an
issue, especially on EHCI HCD, as that one implements most of the
transfers using async schedule.

Note that we have usb_disable_asynch(), which however is utterly broken.
The usb_disable_asynch() blocks the USB core from doing async transfers
by setting a global flag. The async schedule should however be disabled
per USB controller. Moreover, setting a global flag does not prevent the
controller from using the async schedule, which e.g. the EHCI HCD does.

This patch implements additional callback to the controller, which
permits it to lock the async schedule and keep it running across
multiple transfers. Once the schedule is unlocked, it must also be
disabled. This thus prevents the async schedule from running outside
of the USB mass storage transfers.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Tested-by: Tom Rini <trini@konsulko.com> [omap3_beagle, previously failing]
2020-04-09 15:26:59 -04:00
Tom Rini
1f47e2aca4 Xilinx changes for v2020.07
common:
 - Align ENV_FAT_INTERFACE
 - Fix MAC address source print log
 - Improve based autodetection code
 
 xilinx:
 - Enable netconsole
 
 Microblaze:
 - Setup default ENV_OFFSET/ENV_SECT_SIZE
 
 Zynq:
 - Multiple DT updates/fixes
 - Use DEVICE_TREE environment variable for DTB selection
 - Switch to single zynq configuration
 - Enable NOR flash via DM
 - Minor SPL print removal
 - Enable i2c mux driver
 
 ZynqMP:
 - Print multiboot register
 - Enable cache commands in mini mtest
 - Multiple DT updates/fixes
 - Fix firmware probing when driver is not enabled
 - Specify 3rd backup RAM boot mode in SPL
 - Add SPL support for zcu102 v1.1 and zcu111 revA
 - Redesign debug uart enabling and psu_init delay
 - Enable full u-boot run from EL3
 - Enable u-boot.itb generation without ATF with U-Boot in EL3
 
 Versal:
 - Enable distro default
 - Enable others SPI flashes
 - Enable systems without DDR
 
 Drivers:
 - Gem:
   - Flush memory after freeing
   - Handle mdio bus separately
 - Watchdog:
   - Get rid of unused global data pointer
   - Enable window watchdog timer
 - Serial:
   - Change reinitialization logic in zynq serial driver
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXoxw9wAKCRDKSWXLKUoM
 IbQxAKCK23yTy4FoN8oTGTYsbmLOA9kVUQCbBx8lg4nBeA8ihSaAnY+HMDF37YI=
 =Lg54
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2020.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2020.07

common:
- Align ENV_FAT_INTERFACE
- Fix MAC address source print log
- Improve based autodetection code

xilinx:
- Enable netconsole

Microblaze:
- Setup default ENV_OFFSET/ENV_SECT_SIZE

Zynq:
- Multiple DT updates/fixes
- Use DEVICE_TREE environment variable for DTB selection
- Switch to single zynq configuration
- Enable NOR flash via DM
- Minor SPL print removal
- Enable i2c mux driver

ZynqMP:
- Print multiboot register
- Enable cache commands in mini mtest
- Multiple DT updates/fixes
- Fix firmware probing when driver is not enabled
- Specify 3rd backup RAM boot mode in SPL
- Add SPL support for zcu102 v1.1 and zcu111 revA
- Redesign debug uart enabling and psu_init delay
- Enable full u-boot run from EL3
- Enable u-boot.itb generation without ATF with U-Boot in EL3

Versal:
- Enable distro default
- Enable others SPI flashes
- Enable systems without DDR

Drivers:
- Gem:
  - Flush memory after freeing
  - Handle mdio bus separately
- Watchdog:
  - Get rid of unused global data pointer
  - Enable window watchdog timer
- Serial:
  - Change reinitialization logic in zynq serial driver

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-07 17:13:35 -04:00
Ye Li
9d15d1d1c2 Revert "common: spl_fit: Default to IH_OS_U_BOOT if FIT_IMAGE_TINY enabled"
Commit cf8dcc5d02 ("common: spl_fit: Default to IH_OS_U_BOOT if
FIT_IMAGE_TINY enabled") is not correct, it will append fdt to each loadable
image. Actually when using TINY FIT, the first loadable image is thought as
u-boot and already have fdt appended.

Signed-off-by: Ye Li <ye.li@nxp.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
2020-04-03 11:29:23 -04:00
Jagan Teki
61853a7ac7 rockchip: Enable pre console for rk3399
Enable pre console buffer for rk3399 platform.

This would help to capture the console messages prior to
the console being initialised. Enabling this would help
to capture all the console messages on video output source
like HDMI. So we can find the full console messages of
U-Boot proper on HDMI display when enabled it for RK3399
platform boards.

Buffer address used for pre console is 0x0f200000 which is
ram base plus 240MiB. right now the Allwinner SoC is using
similar computation.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
2020-04-02 15:49:16 +02:00
Simon Glass
72188f5462 image: Use constants for 'required' and 'key-name-hint'
These are used in multiple places so update them to use a shared #define.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-04-01 07:45:09 -06:00
Simon Glass
8a9d03732e image: Load the correct configuration in fit_check_sign
At present bootm_host_load_images() is passed the configuration that has
been verified, but ignores it and just uses the default configuration.
This may not be the same.

Update this function to use the selected configuration.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-01 07:45:09 -06:00
Simon Glass
67acad3db7 image: Check hash-nodes when checking configurations
It is currently possible to use a different configuration's signature and
thus bypass the configuration check. Make sure that the configuration node
that was hashed matches the one being checked, to catch this problem.

Also add a proper function comment to fit_config_check_sig() and make it
static.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-01 07:45:09 -06:00
Simon Glass
472f9113db image: Return an error message from fit_config_verify_sig()
This function only returns an error message sometimes. Update it to always
return an error message if one is available. This makes it easier to see
what went wrong.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-01 07:45:09 -06:00
Simon Glass
382cf62039 image: Be a little more verbose when checking signatures
It is useful to be a little more specific about what is being checked.
Update a few messages to help with this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-01 07:45:09 -06:00
Simon Glass
390b26dc27 image: Correct comment for fit_conf_get_node()
This should mention that conf_uname can be NULL and should be in the
header file. Fix this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-01 07:45:09 -06:00
Tom Rini
2b18b89156 Merge branch 'next' of git://git.denx.de/u-boot-usb into next 2020-03-31 17:24:19 -04:00
Lihua Zhao
0df27d687c image-fit: Allow loading FIT image for VxWorks
This adds the check against IH_OS_VXWORKS during FIT image load,
to allow loading FIT image for VxWorks.

Signed-off-by: Lihua Zhao <lihua.zhao@windriver.com>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-03-31 10:06:52 -04:00
Tom Rini
a356e7a86b spl: Kconfig: Escape '$(ARCH)' in LDSCRIPT entries
The default SPL / TPL linker script is in the $(ARCH) directory.  The
way we use this today works but isn't ideal.  With an update to Kconfig
to re-sync with the Linux Kernel, we need to escape the '$' here so that
it will end up being evaluated by make.

Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
2020-03-16 16:42:50 -04:00
Heinrich Schuchardt
183780491f fit: check return value of fit_image_get_data_size()
GCC-10 reports:

In file included from tools/common/image-fit.c:1:
include/image.h: In function ‘fit_image_get_data_and_size’:
./tools/../common/image-fit.c:1015:9: warning: ‘len’ may be used
uninitialized in this function [-Wmaybe-uninitialized]
 1015 |   *size = len;
      |   ~~~~~~^~~~~
./tools/../common/image-fit.c:996:6: note: ‘len’ was declared here
  996 |  int len;
      |      ^~~

Add the missing check of the return value of fit_image_get_data_size().

Fixes: c3c8638804 ("add FIT data-position & data-offset property support")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-03-13 09:30:30 -04:00
AKASHI Takahiro
b983cc2da0 lib: rsa: decouple rsa from FIT image verification
Introduce new configuration, CONFIG_RSA_VERIFY which will decouple building
RSA functions from FIT verification and allow for adding a RSA-based
signature verification for other file formats, in particular PE file
for UEFI secure boot.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-03-12 08:20:38 -04:00
Faiz Abbas
cf00825596 spl: mmc: Fix spl_mmc_get_uboot_raw_sector() implementation
The call to spl_mmc_get_uboot_raw_sector() completely ignores and
overwrites the raw_sect value passed from the caller of spl_mmc_load().

Fix this by passing raw_sect to the function and returning the same
value in the default case.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-03-09 08:33:16 +08:00
Jagan Teki
38070170b8 rockchip: rk3288: Enable pre console buffer
Enable pre console buffer for rk3288 platform.

This would help to capture the console messages prior to
the console being initialised. Enabling this would help
to capture all the console messages on video output source
like HDMI. So we can find the full console messages of
U-Boot proper on HDMI display when enabled it for RK3288
platform boards.

Buffer address used for pre console is 0x0f000000 which is
ram base plus 240MiB. right now the Allwinner SoC is using
similar computation.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19 16:45:38 +08:00
Ovidiu Panait
fbf9c154a6 board_f: Make clear_bss generic
clear_bss is already used by 3 arches (x86, arc, xtensa), so make it generic
and provide a weak nop stub for it. This also removes arch-specific ifdef
duplications around clear_bss.

Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
2020-02-13 10:10:50 -05:00
Heinrich Schuchardt
a3a9e04657 common/console.c: discard volatile
Avoid errors of like

common/console.c: In function ‘console_record_reset’:
common/console.c:615:16: error: passing argument 1 of ‘membuff_purge’
discards ‘volatile’ qualifier from pointer target type
[-Werror=discarded-qualifiers]
  615 |  membuff_purge(&gd->console_out);
      |                ^~~~~~~~~~~~~~~~

by casting to non-volatile.

The volatile property stems from declarations like

arch/arm/include/asm/global_data.h:114:

But there is no need to treat gd->console_out and gd->console_in as
volatile in the context of common/console.c.

Fixes: b612312816 ("console: Add a function to read a line of the output / eof")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-02-13 10:10:50 -05:00
Tom Rini
9a8942b53d sandbox conversion to SDL2
TPM TEE driver
 Various minor sandbox video enhancements
 New driver model core utility functions
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl48iogACgkQfxc6PpAI
 reaVzAf/an3/yKe6r3CVWlcRV6H/dVg1ApnnLpX7jS0p0b++oCVvOiy7z1WPXj3k
 b1SSgENDeeZ/8EHio+Gf7ZidH/TGEj7L6YEFwd1t60GMkZiWEkNf4Z53tw482YG+
 96hoPD+ySTW+ddIdVHWAFG2I4aEiKHANJAp/ItNdD+rLbrEwNQy+eiK5JTOk80B6
 /X8AJCLZeAC1s7vs+2+WolgjT78QGzA9HHalMiublcqh0ivKKk0QeQiOKKPe8JYJ
 om5YY1TxayQ60Xmo5f39/SBfzEEklxw83sU9o1tBeYzyVUpu7fQdkxiDbWdsij77
 DgwLdeYQJGbN+hdSWE0gjTqyhW+lWA==
 =KRoA
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-6feb20' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm

sandbox conversion to SDL2
TPM TEE driver
Various minor sandbox video enhancements
New driver model core utility functions
2020-02-11 10:58:41 -05:00
Marek Bykowski
2aa69c9b9d Kconfig: update LOGLEVEL range
As LOGLEVEL ranges form 0 to 9 set the limit to 10.

Signed-off-by: Marek Bykowski <marek.bykowski@gmail.com>
2020-02-10 22:14:18 -05:00
Simon Glass
336d4615f8 dm: core: Create a new header file for 'compat' features
At present dm/device.h includes the linux-compatible features. This
requires including linux/compat.h which in turn includes a lot of headers.
One of these is malloc.h which we thus end up including in every file in
U-Boot. Apart from the inefficiency of this, it is problematic for sandbox
which needs to use the system malloc() in some files.

Move the compatibility features into a separate header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Simon Glass
1f6510c4cf exports: Add the malloc.h header
This file should include the malloc.h header since it references malloc().
Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Sean Anderson
19464f4feb cli: Make the sandbox board_run_command the default
If CONFIG_CMDLINE=n, common/cli.c calls board_run_command. This fails to
link on most architectures. However, the sandbox architecture has an
implementation which we can use.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-02-05 19:33:46 -07:00
Thirupathaiah Annapureddy
28b417ce85 image: fdt: check "status" of "/reserved-memory" subnodes
boot_fdt_add_mem_rsv_regions() scans the subnodes of
"/reserved-memory" and adds them to reserved lmb regions.
Currently this scanning does not take into "status" property.
Even if the subnode is disabled, it gets added to the
reserved lmb regions.

This patch checks the "status" property before adding it
to reserved lmb regions.

Signed-off-by: Thirupathaiah Annapureddy <thiruan@linux.microsoft.com>
2020-02-05 19:33:46 -07:00
Simon Glass
b612312816 console: Add a function to read a line of the output / eof
When recording the console output for testing it is useful to be able to
read the output a line at a time to check that the output is correct. Also
we need to check that we get to the end of the output.

Add a console function to return the next line and another to see how must
data is left.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Simon Glass
b83994dec7 bloblist: Zero records when adding
It is convenient for bloblist to zero out the contents of a records when
it is added. This saves the callers having to do it.

Update the API accordingly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Simon Glass
02247c1887 bloblist: Tidy up a few comments and code-style nits
Add a messing error code to bloblist_new() and tidy up the line length in
bloblist_addrec().

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Simon Glass
5b044548f5 bloblist: Add a new function to add or check size
A common check is to see if a blob is present, create it if not and make
sure that the size is large enough. Add a function to handle this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Sam Protsenko
7f2531502c image: android: Add routine to get dtbo params
Android Boot Image v1 adds "Recovery DTB" field in image header and
associate payload in boot image itself [1]. Payload should be in
Android DTB/DTBO format [2]. That "Recovery DTB" area should be only
populated for non-A/B devices, and only in recovery image.

Add function to get an address and size of that payload. That function
can be further used e.g. in 'abootimg' command to provide the user a way
to get the address of recovery dtbo from U-Boot shell, which can be
further parsed using 'adtimg' command.

[1] https://source.android.com/devices/bootloader/boot-image-header
[2] https://source.android.com/devices/architecture/dto/partitions

Signed-off-by: Sam Protsenko <joe.skb7@gmail.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04 09:07:24 +05:30
Sam Protsenko
c3bfad825a image: android: Add functions for handling dtb field
Android Boot Image v2 adds "DTB" payload (and corresponding field in the
image header). Provide functions for its handling:

  - android_image_get_dtb_by_index(): Obtain DTB blob from "DTB" part of
    boot image, by blob's index
  - android_image_print_dtb_contents(): Iterate over all DTB blobs in
    "DTB" part of boot image and print those blobs info

"DTB" payload might be in one of the following formats:
  1. concatenated DTB blobs
  2. Android DTBO format

The latter requires "android-image-dt.c" functionality, so this commit
selects that file for building for CONFIG_ANDROID_BOOT_IMAGE option.

Right now this new functionality isn't used, but it can be used further.
As it's required to apply some specific dtbo blob(s) from "dtbo"
partition, we can't automate this process inside of "bootm" command. But
we can do next:
  - come up with some new command like "abootimg" to extract dtb blob
    from boot image (using functions from this patch)
  - extract desired dtbo blobs from "dtbo" partition using "adtimg"
    command
  - merge dtbo blobs into dtb blob using "fdt apply" command
  - pass resulting dtb blob into bootm command in order to boot the
    Android kernel with Android ramdisk from boot image

Signed-off-by: Sam Protsenko <joe.skb7@gmail.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04 09:07:24 +05:30
Ovidiu Panait
016e4ae7ef common/board_f.c: Remove arch-specific checks for cpucheck
This removes the arch-specific checks for "checkcpu" function from the init
sequence. Make "checkcpu" generic and provide a weak nop stub instead.

Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
2020-01-30 13:30:35 -05:00
Angelo Durgehello
c05b38df47 common: fix regression on block cache init
m68k needs block cache list initialized after relocation.
Other architectures must not be involved.

Fixing regression related to:

commit 1526bcce0f
	("common: add blkcache init")

Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
2020-01-26 13:36:14 -05:00
Tom Rini
0b23b0d9f9 Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxi
- Libre Computer ALL-H3-IT/ALL-H5-CC board (Chen-Yu Tsai)
- Allwinner R40 Ethernet, usb phy enablement (Andre Przywara)
- Sunxi auto load from 128KB MMC offset (Andre Przywara)
- Orange Pi Win Ethernet phy enablement (Jernej Skrabec)
2020-01-26 12:05:11 -05:00
Angelo Durgehello
1526bcce0f common: add blkcache init
On m68k, block_cache list is relocated, but next and prev list
pointers are not adjusted to the relocated struct list_head address,
so the first iteration over the block_cache list hangs.

This patch initializes the block_cache list after relocation.

Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
Reviewed-by: Eric Nelson <eric@nelint.com>
2020-01-25 12:04:36 -05:00
Andre Przywara
671d64fe35 sunxi: move CONFIG_SYS_SPI_U_BOOT_OFFS out of defconfig
For Allwinner SoCs the CONFIG_SYS_SPI_U_BOOT_OFFS value is not really a
board choice: The boot ROM only loads the SPL from offset 0 of the SPI
NOR flash, and loads at most 32KB. This is a similar situation as on MMC,
so consequently we create our "joint" image (SPL + U-Boot proper) with
that 32KB offset during the build.

So define the value of this symbol to be 32KB by default for every
Allwinner SoC. This removes the definition of this symbol from the
_defconfig files, and avoids every board to define this over and over
again.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-24 23:06:56 +05:30
Simon Glass
f2f8e90034 common: Move and rename CONFIG_SYS_SUPPORT_64BIT_DATA
This is not really a CONFIG since it is not intended to be set by boards.
Move it into the compiler header with other similar defines, and rename
it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24 23:06:49 +05:30
Simon Glass
29a4a9f105 common: Move hang() to the same header as panic()
At present panic() is in the vsprintf.h header file. That does not seem
like an obvious choice for hang(), even though it relates to panic(). So
let's put hang() in its own header.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Migrate a few more files]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-24 23:06:49 +05:30
Simon Glass
91527c9a30 common: Move RAM-sizing functions to init.h
These functions relate to memory init so move them into the init
header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24 23:06:49 +05:30
Simon Glass
ea188950af common: Move the image globals into image.h
These three globals relate to image handling. Move them to the image
header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24 23:06:49 +05:30
Simon Glass
e7f0ec09a0 image: Rename load_addr, save_addr, save_size
These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24 23:06:49 +05:30
Simon Glass
b63ff2ae54 common: Move clock functions into a new file
These three clock functions don't use driver model and should be migrated.
In the meantime, create a new file to hold them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24 23:06:48 +05:30
Simon Glass
9d89bcd8e5 common: Move reset_phy() to net.h
This is a network function so let's move it into that header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24 23:06:48 +05:30
Simon Glass
0f67fc2328 common: Move jumptable_init() out of common.h
This function is defined in exports.c so move it to its header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-24 23:06:48 +05:30
Simon Glass
9dfbc24459 common: Move flash_perror() to flash.h
This function belongs more in flash.h than common.h so move it.

Also remove the space before the bracket in some calls.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-24 23:06:47 +05:30
Simon Glass
930c57ed96 common: Move main_loop() to init.h
Move this function out of common.h and into a better place.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-24 23:06:47 +05:30
Masahiro Yamada
9086ab564b board_init: remove meaningless increment in board_init_f_init_reserve()
The base is not used in the code that follows this increment.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-23 07:29:58 -05:00
Klaus H. Sorensen
602ce1d106 spl_fit.c: enable loading compressed u-boot from fit image
Allow reading compressed content from fit image, even if
CONFIG_SPL_OS_BOOT is not set.

This allow booting compressed 2nd stage u-boot from fit image.

Additionally, do not print warning message if compression node is not
found, since it simply implies the content is uncompressed.

Signed-off-by: Klaus H. Sorensen <khso@prevas.dk>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2020-01-22 17:47:57 -05:00
Simon Glass
4d979bfdbc common: Move and rename CONFIG_SYS_SUPPORT_64BIT_DATA
This is not really a CONFIG since it is not intended to be set by boards.
Move it into the compiler header with other similar defines, and rename
it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17 17:53:52 -05:00
Simon Glass
db41d65a97 common: Move hang() to the same header as panic()
At present panic() is in the vsprintf.h header file. That does not seem
like an obvious choice for hang(), even though it relates to panic(). So
let's put hang() in its own header.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Migrate a few more files]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-17 17:53:40 -05:00
Simon Glass
9b4a205f45 common: Move RAM-sizing functions to init.h
These functions relate to memory init so move them into the init
header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17 14:02:35 -05:00
Simon Glass
8e8ccfe1aa common: Move the image globals into image.h
These three globals relate to image handling. Move them to the image
header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17 14:02:35 -05:00
Simon Glass
bb872dd930 image: Rename load_addr, save_addr, save_size
These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17 14:02:35 -05:00
Simon Glass
d96c26040e common: Move clock functions into a new file
These three clock functions don't use driver model and should be migrated.
In the meantime, create a new file to hold them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17 13:27:29 -05:00
Simon Glass
5e6267af31 common: Move reset_phy() to net.h
This is a network function so let's move it into that header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17 13:26:50 -05:00
Simon Glass
a6f2aafe09 common: Move jumptable_init() out of common.h
This function is defined in exports.c so move it to its header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-17 13:26:49 -05:00
Simon Glass
0ee48252b4 common: Move flash_perror() to flash.h
This function belongs more in flash.h than common.h so move it.

Also remove the space before the bracket in some calls.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17 13:26:48 -05:00
Simon Glass
6b8d3ceaf5 common: Move main_loop() to init.h
Move this function out of common.h and into a better place.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-17 13:26:48 -05:00
Philippe Reynes
4df3578119 u-boot: fit: add support to decrypt fit with aes
This commit add to u-boot the support to decrypt
fit image encrypted with aes. The FIT image contains
the key name and the IV name. Then u-boot look for
the key and IV in his device tree and decrypt images
before moving to the next stage.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-01-17 10:16:29 -05:00
Philippe Reynes
7298e42250 mkimage: fit: add support to encrypt image with aes
This commit add the support of encrypting image with aes
in mkimage. To enable the ciphering, a node cipher with
a reference to a key and IV (Initialization Vector) must
be added to the its file. Then mkimage add the encrypted
image to the FIT and add the key and IV to the u-boot
device tree.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-01-17 10:15:49 -05:00
Tom Rini
994bb86fc9 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell
- Clearfog: Fix SD booting (Baruch)
- Misc updates to MMC handling in SPL to support booting from
  main data partition (vs hardware boot partition) on MVEBU (Baruch)
2020-01-16 12:52:07 -05:00
Tom Rini
92329e2413 Xilinx/FPGA changes for v2020.04
ARM64:
 - Add INIT_SPL_RELATIVE dependency
 
 SPL:
 - FIT image fix
 - Enable customization of bl2_plat_get_bl31_params()
 
 Pytest:
 - Add test for octal/hex conversions
 
 Microblaze:
 - Fix manual relocation for one SPI instance
 
 Nand:
 - Convert zynq/zynqmp drivers to DM
 
 Xilinx:
 - Enable boot script location via Kconfig
 - Support OF_SEPARATE in board FDT selection
 - Remove low level uart setup it is done later by code
 - Add support for DEVICE_TREE variable passing for SPL
 
 Zynq:
 - Enable jtag boot mode via distro boot
 - Removing unused baseaddresses from hardware.h
 - DT fixups
 
 ZynqMP:
 - Fix emmc boot sequence
 - Simplify spl logic around bss and board_init_r()
 - Support psu_post_config_data() calling
 - Tune mini-nand DTS
 - Fix psu wiring for a2197 boards
 - Add runtime MMC device boot order filling in spl
 - Clear ATF handoff handling with custom bl2_plat_get_bl31_params()
 - Add support u-boot.its generation
 - Use single image configuration for all platforms
 - Enable PANIC_HANG via Kconfig
 - DT fixups
 - Firmware fixes
 - Add support for zcu208 and zcu1285
 
 Versal:
 - Fix emmc boot sequence
 - Enable board_late_init() by default
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXiAK2AAKCRDKSWXLKUoM
 IX3VAJ41GJXBwP7Z9hX9RFhsqOu0M+NdegCdFvMUaCQ1bSvgAMOnDL+JeB21+Qo=
 =qSbv
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2020.04' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx/FPGA changes for v2020.04

ARM64:
- Add INIT_SPL_RELATIVE dependency

SPL:
- FIT image fix
- Enable customization of bl2_plat_get_bl31_params()

Pytest:
- Add test for octal/hex conversions

Microblaze:
- Fix manual relocation for one SPI instance

Nand:
- Convert zynq/zynqmp drivers to DM

Xilinx:
- Enable boot script location via Kconfig
- Support OF_SEPARATE in board FDT selection
- Remove low level uart setup it is done later by code
- Add support for DEVICE_TREE variable passing for SPL

Zynq:
- Enable jtag boot mode via distro boot
- Removing unused baseaddresses from hardware.h
- DT fixups

ZynqMP:
- Fix emmc boot sequence
- Simplify spl logic around bss and board_init_r()
- Support psu_post_config_data() calling
- Tune mini-nand DTS
- Fix psu wiring for a2197 boards
- Add runtime MMC device boot order filling in spl
- Clear ATF handoff handling with custom bl2_plat_get_bl31_params()
- Add support u-boot.its generation
- Use single image configuration for all platforms
- Enable PANIC_HANG via Kconfig
- DT fixups
- Firmware fixes
- Add support for zcu208 and zcu1285

Versal:
- Fix emmc boot sequence
- Enable board_late_init() by default
2020-01-16 09:45:40 -05:00
Baruch Siach
e42afd8416 spl: mmc: support uboot image offset on main partition
On Armada 38x platforms the ROM code loads SPL from offset 0 of eMMC
hardware boot partitions. When there are no boot partitions (i.e. SD
card) the ROM skips the first sector that usually contains the (logical)
partition table. Since the generated .kwb image contains the main U-Boot
image in a fixed location (0x140 sectors by default), we end up with the
main U-Boot image in offset of 1 sector. The current workaround is to
manually set CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x141 to
compensate for that.

This patch uses the run-time detected boot partition to determine the
right offset of the main U-Boot partition. The generated .kwb image is
now compatible with both eMMC boot partition, and SD card main data
partition.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2020-01-16 10:58:52 +01:00
Vignesh Raghavendra
74326a320a Kconfig: Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMA
Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMA. This allows to use
macros such as CONFIG_IS_ENABLED() that allow conditional compilation of
code for SPL and U-Boot.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-15 19:50:27 -05:00
Giulio Benetti
1054344fa4 spl: fix entry_point equal to load_addr
At the moment entry_point is set to image_get_load(header) that sets it
to "load address" instead of "entry point", assuming entry_point is
equal to load_addr, but it's not true. Then load_addr is set to
"entry_point - header_size", but this is wrong too since load_addr is
not an entry point.

So use image_get_ep() for entry_point assignment and image_get_load()
for load_addr assignment.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-14 22:53:59 +01:00
Michal Simek
5c03c990d1 spl: atf: Enable option to rewrite bl2_plat_get_bl31_params()
Xilinx ZynqMP platform is passing information to ATF in private format and
ATF bl31 parameters are not used. That's why enable option to rewrite this
function by platform specific implementation.

The patch also move and update kernel-doc format with missing parameters.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:54 +01:00
Michal Simek
935568eecc spl: atf: Add missing ndepth initialization
ndepth needs to be initialized before it is used in fdt_next_node().
Uninitialized value is causing that node is found and depth increase but
won't pass condition below because initial state wasn't setup.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-14 09:05:53 +01:00
Eugeniu Rosca
b84acf1056 dtimg/am57xx_evm_defconfig: Rename dtimg to adtimg
Rename the existing 'dtimg' command to 'adtimg', in order to:
 - Suggest the Android origins and scope
 - Be consistent with the upcoming 'abootimg' command (naming
   suggested by Simon [*])

The change in _not_ backward compatible, but its benefits outweigh its
downsides, given that we don't expect active users of 'dtimg' today.

Perform the rename in several steps:
 1. Rename *.c file and Kconfig symbol. This should allow
    'git log --follow' to properly track the history of 'adtimg.c'
 2. 's/dtimg/adtimg/g' in the internal namespace of 'adtimg.c'

ELF comparison [**] before and after shows no functional change.

[*] https://patchwork.ozlabs.org/patch/1182212/#2291600
[**] diff -u <(objdump -d cmd/dtimg.o) <(objdump -d cmd/adtimg.o)

Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Simon Glass<sjg@chromium.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
2020-01-10 14:18:26 -05:00
Simon Goldschmidt
c82abaa5d6 spl: fix stack usage check if gd is not initialized
Most platforms do not set up gd->start_addr_sp in SPL. Since this is
required for CONFIG_SPL_SYS_REPORT_SACK_F_USAGE to work correctly, set
up gd->start_addr_sp in SPL to the value passed to
board_init_f_init_reserve if it is not set yet.

Fixes: d8c0332031 ("spl: implement stack usage check")
Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-10 10:25:13 -05:00
Tom Rini
a74a2134b2 Merge branch 'master' of git://git.denx.de/u-boot-usb
- DFU updates
2020-01-09 08:51:57 -05:00
Tom Rini
7086de4948 Pull request for UEFI sub-system for efi-2020-04-rc1
This pull request provides:
 
 * support for FIT images for UEFI binaries
 * drivers for hardware random number generators
 * an implementation of the EFI_RNG_PROTOCOL
 * a sub-command for efidebug to display configuration tables
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl4UvR4ACgkQxIHbvCwF
 GsRJZhAAmlsRBUS3fvFV5GtB8bkWcSU4/s3TVYJui0fOhY02ZDIKkrubZzDx/Lgv
 9OaVwjQ3JSmq5XkDmXqzNDzYkxitQ5Qf/cFiBF5HpA3USkOttb3GIfgj0qD6DGzM
 cKyhgJm7bZoMN/mkIzkWsry1ASwYpB3ipyoJAfRfryw9ok4j9RfJ7pPieeycGWGJ
 0sZsJI0v7e6xt5Qsytk5sZNvlCFhyhl2OMYliAlRKBryh31Ahr2e6KEwsJh7VyCP
 4K12eBTqIJq1qHk7Lr0g1CnMCdeOT8J7qvX1+kvt3HupxTMkYRv2AR5CQWRKck5E
 RsmcKmiTHz/76w6Gk7kLan7y0UCSHnfHQ3aSEkkx4O/v4OC85VteyLAEriS7J9Hx
 xSNyoj01U2wG3SLrUjkAZv6JgyC8uCezRzOHOqN25Q2mRROVq781mcMfRXwdq6cD
 L4rrTsIDPzNF19wDa7P5tK6JMF8BDifLNuMTQj5LdJYMHJTJZBWG/vTNFPEldaIP
 D9RPoCibTolpiuCYneeXJURHGm5yme7KoxAPiMU+fAWO1F6SO25zxYA7MAiY4OYw
 zk7Ipaat0luIu1gC2ICYxrLnsMBq9glABrdq99i0DpUg9n9N/7SpcJSj2DMrFGmY
 u4yenWM1KTgjLoVHRhpTbCzF15GlYN4SHXV5iYO+Pof5WQYnv8w=
 =SjPV
 -----END PGP SIGNATURE-----

Merge tag 'efi-2020-04-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for efi-2020-04-rc1

This pull request provides:

* support for FIT images for UEFI binaries
* drivers for hardware random number generators
* an implementation of the EFI_RNG_PROTOCOL
* a sub-command for efidebug to display configuration tables
2020-01-08 18:57:11 -05:00
Tom Rini
ce022f2857 Merge branch 'master' of git://git.denx.de/u-boot-socfpga 2020-01-08 15:23:49 -05:00
Cristian Ciocaltea
ecc7fdaa9e bootm: Add a bootm command for type IH_OS_EFI
Add support for booting EFI binaries contained in FIT images.
A typical usage scenario is chain-loading GRUB2 in a verified
boot environment.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07 18:08:21 +01:00
Cristian Ciocaltea
a031b03f64 image: Add IH_OS_EFI for EFI chain-load boot
Add a new OS type to be used for chain-loading an EFI compatible
firmware or boot loader like GRUB2, possibly in a verified boot
scenario.

Bellow is sample ITS file that generates a FIT image supporting
secure boot. Please note the presence of 'os = "efi";' line, which
identifies the currently introduced OS type:

/ {
    #address-cells = <1>;

    images {
        efi-grub {
            description = "GRUB EFI";
            data = /incbin/("bootarm.efi");
            type = "kernel_noload";
            arch = "arm";
            os = "efi";
            compression = "none";
            load = <0x0>;
            entry = <0x0>;
            hash-1 {
                algo = "sha256";
            };
        };
    };

    configurations {
        default = "config-grub";
        config-grub {
            kernel = "efi-grub";
            signature-1 {
                algo = "sha256,rsa2048";
                sign-images = "kernel";
            };
        };
    };
};

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07 18:08:21 +01:00
Jean-Jacques Hiblot
152781d464 spl: fit: Allow the board to tell if more images must be loaded from FIT
spl_fit_get_image_name() is used to get the names of the images that the
SPL must load from the FIT. It relies on the content of a property present
in the FIT. The list of images is thus statically defined in the FIT.
With this scheme, it quickly becomes hard to manage combinations of more
than a handful of images.
To address this problem, give the board driver code the opportunity to
add to the list of images. The images from the FIT property are loaded
first, and then the board_get_fit_loadable() is called to get more image
names.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-07 11:13:25 -05:00
Jean-Jacques Hiblot
c1648d056e spl: fit: constify the output parameter of spl_fit_get_image_name()
There is no need for it to be non-constant. Making it constant, allows to
return constant string without warning.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-07 11:12:47 -05:00
Jean-Jacques Hiblot
19141d6983 spl: fit: be more verbose when an error occurs when applying the overlays
There are many ways the overlay application can fail.
2 of them are probably the most common:
- the application itself failed. Usually this is comes from an unresolved
  reference
- DTBO not available in FIT (could be because of a typo)

In both case it is good to be more explicit about the error and at least
show which overlay is failing.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-07 11:12:47 -05:00
Jean-Jacques Hiblot
24bf44cf88 spl: fit: Do not fail immediately if an overlay is not available
If one overlay that must be applied cannot be found in the FIT, the current
implementation stops applying the overlays. Let's make it skip only the
failing overlay instead.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-07 11:12:47 -05:00
Jean-Jacques Hiblot
ea376ebc9b spl: fit: allocate a temporary buffer to load the overlays
If the node describing an overlay does not specify a load address, it will
be loaded at the address previously used.
Fixing it by allocating a temporary buffer that will be used as a
default load address. By default, the size of the buffer is 64kB which
should be plenty for most use cases.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-07 11:12:47 -05:00
Jean-Jacques Hiblot
99329be2c5 spl: fit: Make room in the FDT before applying overlays
Make room in the FDT before applying the overlay, otherwise it may fail if
the overlay is big. As the exact added size is not known in advance, just
add the size of the overlay.
Move after the end of the application of the overlays, the resize  of the
FDT for the injection of the details on the loadables.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-07 11:12:47 -05:00
Michal Simek
9d13b87254 spl: fit: Add support for applying DT overlay
doc/uImage.FIT/overlay-fdt-boot.txt is describing how to create FIT
image with DT overlays in it.
Add support for this feature to SPL.

Here is the ZynqMP fragment where dtb points to full DT and dtbo is
overlay which should be applied on the top of dtb.
config {
        description = "ATF with full u-boot overlay";
        firmware = "atf";
        loadables = "uboot";
        fdt = "dtb", "dtbo";
};

The whole feature depends on OF_LIBFDT_OVERLAY which is adding +4kB code
and 0 for platforms which are not enabling this feature.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-07 11:12:47 -05:00
Jean-Jacques Hiblot
6b8b98d54d spl: fit: don't load the firmware twice
When u-boot.img is a FIT image generated automatically by mkimage, the
configuration node has the following structure:
conf-1 {
   description = "k3-am654-base-board";
   firmware = "firmware-1";
   loadables = "firmware-1";
   fdt = "fdt-1";
};

The firmware is referenced twice. Once by the 'firmware' property and
once by the 'loadables' property. Currently this result in the firmware
being loaded twice. This is not a big problem but has an impact on the
boot time.
Fixing it by not loading a loadable image if it is also the firmware image.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Andreas Dannenberg <dannenberg@ti.com>
2020-01-07 11:12:47 -05:00
Ley Foon Tan
5c9c71b660 spl: Allow cache drivers to be used in SPL
Add an option for building cache drivers in SPL.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07 14:38:33 +01:00
Andy Shevchenko
98a8f445fd dfu: Add optional timeout parameter
When the `dfu` command is called from the U-Boot environment,
it now accepts an optional parameter that specifies a timeout (in seconds).
If a DFU connection is not made within that time the `dfu` command exits
(as it would if Ctrl+C was pressed). If the timeout is left empty or being
zero the `dfu` command behaves as it does now.

This is useful for allowing U-Boot to check to see if anything wants to
upload new firmware before continuing to boot.

The patch is based on the commit
5e966ccc3c
by Sebastien Colleur, which has been heavily reworked due to U-Boot changes
in the past.

Signed-off-by: Brad Campbell <bradjc5@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-07 14:37:50 +01:00
Alison Wang
5d168adf2b configs: Enable SPL_FSL_PBL for some LayerScape platforms
In commit <db4080d56dec>, SPL_FSL_PBL is removed from the configs of
some LayerScape platforms. Actually, SPL_FSL_PBL is needed for SD/NAND
boot on LS1021A/LS1043A/LS1046A to create boot binary having SPL binary
in PBI format concatenated with u-boot binary. SPL_FRAMEWORK is used on
these platforms too.

Signed-off-by: Alison Wang <alison.wang@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-12-26 16:00:20 +05:30
Simon Glass
e82c624d7c spl: Add methods to find the position/size of next phase
Binman supports writing the position and size of U-Boot proper and SPL
into the previous phase of U-Boot. This allows the next phase to be easily
located and loaded.

Add functions to return these useful values, along with symbols to allow
TPL to load SPL.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-15 11:44:28 +08:00
Simon Glass
fe08d39d1b x86: fsp: Add a new arch_fsp_init_r() hook
With FSP2 we need to run silicon init early after relocation. Add a new
hook for this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-15 11:44:17 +08:00
Simon Glass
dd0edcb250 board_r: Move early-timer init later
At present the early timer init happens as soon as driver model is set up.
This makes it impossible to do anything that needs driver model but must
run before devices are probed (as needed with Intel's FSP-S, for example).

In any case it is not a good idea to tie probing of particular drivers too
closely to the DM init.

Create a new function to init the timer and put it a bit later in the
sequence.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-15 11:44:09 +08:00
Simon Glass
3c10dc95bd binman: Add a library to access binman entries
SPL and TPL can access information about binman entries using link-time
symbols but this is not available in U-Boot proper. Of course it could be
made available, but the intention is to just read the device tree.

Add support for this, so that U-Boot can locate entries.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-15 08:48:33 +08:00