configs: Migrate CONFIG_NR_DRAM_BANKS

We have the following cases:
- CONFIG_NR_DRAM_BANKS was defined, migrate normally
- CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
  CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
- CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
  2), set this to 8.

Signed-off-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Tom Rini 2018-08-16 08:16:24 -04:00
parent 999a772d9f
commit 86cf1c8285
1017 changed files with 746 additions and 334 deletions

View File

@ -12,8 +12,6 @@
/* Basic CPU architecture */
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_NR_DRAM_BANKS_MAX 2
/* UART configuration */
#if (CONFIG_SYS_LPC32XX_UART == 1) || (CONFIG_SYS_LPC32XX_UART == 2) || \
(CONFIG_SYS_LPC32XX_UART == 7)

View File

@ -38,7 +38,6 @@
/* Kirkwood has 2k of Security SRAM, use it for SP */
#define CONFIG_SYS_INIT_SP_ADDR 0xC8012000
#define CONFIG_NR_DRAM_BANKS_MAX 2
#define CONFIG_I2C_MVTWSI_BASE0 KW_TWSI_BASE
#define MV_UART_CONSOLE_BASE KW_UART0_BASE

View File

@ -47,7 +47,6 @@
/* end of 16M scrubbed by training in bootrom */
#define CONFIG_SYS_INIT_SP_ADDR 0x00FF0000
#define CONFIG_NR_DRAM_BANKS_MAX 2
#define MV_UART_CONSOLE_BASE MVEBU_UART0_BASE

View File

@ -10,6 +10,4 @@
#define CONFIG_NEEDS_MANUAL_RELOC
#endif
#define CONFIG_NR_DRAM_BANKS 1
#endif

View File

@ -1,6 +1,7 @@
CONFIG_NIOS2=y
CONFIG_SYS_CONFIG_NAME="10m50_devboard"
CONFIG_DEFAULT_DEVICE_TREE="10m50_devboard"
CONFIG_NR_DRAM_BANKS=1
CONFIG_FIT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y

View File

@ -1,6 +1,7 @@
CONFIG_NIOS2=y
CONFIG_SYS_CONFIG_NAME="3c120_devboard"
CONFIG_DEFAULT_DEVICE_TREE="3c120_devboard"
CONFIG_NR_DRAM_BANKS=1
CONFIG_FIT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y

View File

@ -10,6 +10,7 @@ CONFIG_I2C1_ENABLE=y
CONFIG_SATAPWR="PC3"
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-olinuxino-lime"
CONFIG_AHCI=y
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -8,6 +8,7 @@ CONFIG_MMC1_CD_PIN="PG13"
CONFIG_MMC_SUNXI_SLOT_EXTRA=1
CONFIG_USB1_VBUS_PIN="PB10"
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-olinuxino-micro"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -12,6 +12,7 @@ CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y
CONFIG_VIDEO_LCD_POWER="PB10"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino-micro"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set

View File

@ -14,6 +14,7 @@ CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y
CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_CMD_DFU=y

View File

@ -11,6 +11,7 @@ CONFIG_I2C1_ENABLE=y
CONFIG_SATAPWR="PC3"
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2-emmc"
CONFIG_AHCI=y
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_CMD_DFU=y

View File

@ -10,6 +10,7 @@ CONFIG_I2C1_ENABLE=y
CONFIG_SATAPWR="PC3"
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2"
CONFIG_AHCI=y
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_CMD_DFU=y

View File

@ -8,6 +8,7 @@ CONFIG_I2C1_ENABLE=y
CONFIG_SATAPWR="PC3"
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime"
CONFIG_AHCI=y
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -10,6 +10,7 @@ CONFIG_VIDEO_VGA=y
CONFIG_SATAPWR="PB8"
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-micro"
CONFIG_AHCI=y
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -11,6 +11,7 @@ CONFIG_VIDEO_VGA=y
CONFIG_SATAPWR="PB8"
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-micro"
CONFIG_AHCI=y
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -12,6 +12,7 @@ CONFIG_USB0_VBUS_DET="PH5"
CONFIG_SATAPWR="PC3"
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olimex-som-evb"
CONFIG_AHCI=y
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -12,6 +12,7 @@ CONFIG_SATAPWR="PC3"
CONFIG_GMAC_TX_DELAY=4
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olimex-som204-evb-emmc"
CONFIG_AHCI=y
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -11,6 +11,7 @@ CONFIG_SATAPWR="PC3"
CONFIG_GMAC_TX_DELAY=4
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olimex-som204-evb"
CONFIG_AHCI=y
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -15,6 +15,7 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0
CONFIG_VIDEO_LCD_BL_EN="PB2"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-olinuxino"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set

View File

@ -13,6 +13,7 @@ CONFIG_VIDEO_LCD_POWER="PH8"
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-ainol-aw1"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -14,6 +14,7 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-ampe-a76"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -7,6 +7,7 @@ CONFIG_DRAM_EMR1=0
CONFIG_USB1_VBUS_PIN="PB10"
CONFIG_VIDEO_COMPOSITE=y
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-auxtek-t003"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -5,6 +5,7 @@ CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=432
CONFIG_USB1_VBUS_PIN="PG13"
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-auxtek-t004"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -10,6 +10,7 @@ CONFIG_MMC0_CD_PIN="PH13"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_DEFAULT_DEVICE_TREE="sun8i-r40-bananapi-m2-ultra"
CONFIG_AHCI=y
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -8,6 +8,7 @@ CONFIG_VIDEO_COMPOSITE=y
CONFIG_GMAC_TX_DELAY=3
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi"
CONFIG_AHCI=y
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -9,6 +9,7 @@ CONFIG_MMC0_CD_PIN="PB4"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_USB0_ID_DET="PH8"
CONFIG_DEFAULT_DEVICE_TREE="sun8i-r16-bananapi-m2m"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set

View File

@ -10,6 +10,7 @@ CONFIG_VIDEO_COMPOSITE=y
CONFIG_GMAC_TX_DELAY=3
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapro"
CONFIG_AHCI=y
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -6,6 +6,7 @@ CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
CONFIG_USB0_VBUS_PIN="PB10"
CONFIG_VIDEO_COMPOSITE=y
CONFIG_DEFAULT_DEVICE_TREE="sun5i-r8-chip"
CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_CMD_DFU=y
CONFIG_CMD_USB_MASS_STORAGE=y

View File

@ -5,6 +5,7 @@ CONFIG_MACH_SUN5I=y
CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
CONFIG_USB0_VBUS_PIN="PB10"
CONFIG_DEFAULT_DEVICE_TREE="sun5i-gr8-chip-pro"
CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set
CONFIG_MTDIDS_DEFAULT="nand0=sunxi-nand.0"

View File

@ -6,6 +6,7 @@ CONFIG_DRAM_CLK=432
CONFIG_USB1_VBUS_PIN=""
CONFIG_USB2_VBUS_PIN=""
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-cs908"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set

View File

@ -13,6 +13,7 @@ CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_PANEL_HITACHI_TX18D42VM=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-chuwi-v7-cw0825"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -16,6 +16,7 @@ CONFIG_VIDEO_LCD_PANEL_I2C_SDA="PA23"
CONFIG_VIDEO_LCD_PANEL_I2C_SCL="PA24"
CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804=y
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-colombus"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set

View File

@ -7,6 +7,7 @@ CONFIG_MMC0_CD_PIN="PH1"
CONFIG_SATAPWR="PB8"
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubieboard2"
CONFIG_AHCI=y
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -12,6 +12,7 @@ CONFIG_USB1_VBUS_PIN="PH14"
CONFIG_USB3_VBUS_PIN="PH15"
CONFIG_AXP_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="sun9i-a80-cubieboard4"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set

View File

@ -7,6 +7,7 @@ CONFIG_MMC0_CD_PIN="PH1"
CONFIG_SATAPWR="PB8"
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-cubieboard"
CONFIG_AHCI=y
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -12,6 +12,7 @@ CONFIG_SATAPWR="PH12"
CONFIG_GMAC_TX_DELAY=1
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubietruck"
CONFIG_AHCI=y
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_CMD_DFU=y

View File

@ -14,6 +14,7 @@ CONFIG_USB2_VBUS_PIN="PL6"
CONFIG_I2C0_ENABLE=y
CONFIG_AXP_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-cubietruck-plus"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_CONSOLE_MUX=y
# CONFIG_CMD_FLASH is not set

View File

@ -15,6 +15,7 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-empire-electronix-d709"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -14,6 +14,7 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-empire-electronix-m712"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -8,6 +8,7 @@ CONFIG_USB2_VBUS_PIN=""
CONFIG_VIDEO_VGA_VIA_LCD=y
CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN="PH25"
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-hummingbird"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set

View File

@ -14,6 +14,7 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set
CONFIG_VIDEO_LCD_PANEL_LVDS=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-hyundai-a7hd"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -7,6 +7,7 @@ CONFIG_MMC0_CD_PIN="PH1"
CONFIG_SATAPWR="PB8"
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-itead-ibox"
CONFIG_AHCI=y
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -9,6 +9,7 @@ CONFIG_SATAPWR="PB3"
CONFIG_GMAC_TX_DELAY=4
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-lamobo-r1"
CONFIG_AHCI=y
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -5,6 +5,7 @@ CONFIG_MACH_SUN8I_V3S=y
CONFIG_DRAM_CLK=360
CONFIG_DRAM_ZQ=14779
CONFIG_DEFAULT_DEVICE_TREE="sun8i-v3s-licheepi-zero"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set

View File

@ -9,6 +9,7 @@ CONFIG_SATAPWR="PH2"
CONFIG_GMAC_TX_DELAY=3
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3-nano"
CONFIG_AHCI=y
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -7,6 +7,7 @@ CONFIG_DRAM_ZQ=122
CONFIG_SATAPWR="PH2"
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3"
CONFIG_AHCI=y
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -5,6 +5,7 @@ CONFIG_MACH_SUN4I=y
CONFIG_USB1_VBUS_PIN=""
CONFIG_USB2_VBUS_PIN=""
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-pcduino"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -4,6 +4,7 @@ CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=384
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-mk808c"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -9,6 +9,7 @@ CONFIG_VIDEO_LCD_POWER="PH8"
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-primo73"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -12,6 +12,7 @@ CONFIG_VIDEO_LCD_BL_EN="PA25"
CONFIG_VIDEO_LCD_BL_PWM="PH13"
CONFIG_VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828=y
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-primo81"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set

View File

@ -4,6 +4,7 @@ CONFIG_SPL=y
CONFIG_MACH_SUN4I=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-marsboard"
CONFIG_AHCI=y
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set

View File

@ -7,6 +7,7 @@ CONFIG_INITIAL_USB_SCAN_DELAY=2000
CONFIG_USB1_VBUS_PIN="PC27"
CONFIG_USB2_VBUS_PIN=""
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mele-a1000g-quad"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set

View File

@ -7,6 +7,7 @@ CONFIG_VIDEO_VGA=y
CONFIG_VIDEO_COMPOSITE=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-a1000"
CONFIG_AHCI=y
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -6,6 +6,7 @@ CONFIG_DRAM_ZQ=120
CONFIG_USB1_VBUS_PIN="PC27"
CONFIG_USB2_VBUS_PIN=""
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-i7"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set

View File

@ -8,6 +8,7 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_VIDEO_VGA=y
CONFIG_VIDEO_COMPOSITE=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m3"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -8,6 +8,7 @@ CONFIG_MMC0_CD_PIN="PH1"
CONFIG_VIDEO_COMPOSITE=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m5"
CONFIG_AHCI=y
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -6,6 +6,7 @@ CONFIG_DRAM_ZQ=120
CONFIG_USB1_VBUS_PIN="PC27"
CONFIG_USB2_VBUS_PIN=""
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-m9"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set

View File

@ -12,6 +12,7 @@ CONFIG_USB1_VBUS_PIN="PH4"
CONFIG_USB3_VBUS_PIN="PH5"
CONFIG_AXP_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="sun9i-a80-optimus"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set

View File

@ -5,6 +5,7 @@ CONFIG_MACH_SUN4I=y
CONFIG_USB0_VBUS_PIN="PB9"
CONFIG_VIDEO_COMPOSITE=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mini-xplus"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -8,6 +8,7 @@ CONFIG_DRAM_ODT_EN=y
CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
CONFIG_AXP_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="sun8i-r16-nintendo-nes-classic-edition"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set

View File

@ -11,6 +11,7 @@ CONFIG_VIDEO_COMPOSITE=y
CONFIG_GMAC_TX_DELAY=3
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi"
CONFIG_AHCI=y
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -13,6 +13,7 @@ CONFIG_VIDEO_COMPOSITE=y
CONFIG_GMAC_TX_DELAY=3
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi-mini"
CONFIG_AHCI=y
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -10,6 +10,7 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=3
CONFIG_USB1_VBUS_PIN=""
CONFIG_USB2_VBUS_PIN=""
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-sina31s"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set

View File

@ -12,6 +12,7 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-sinlinx-sina33"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_CMD_DFU=y
# CONFIG_CMD_FLASH is not set

View File

@ -8,6 +8,7 @@ CONFIG_DRAM_ODT_EN=y
CONFIG_MACPWR="PD6"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-bananapi-m2-plus"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set

View File

@ -6,6 +6,7 @@ CONFIG_DRAM_CLK=432
CONFIG_USB1_VBUS_PIN=""
CONFIG_USB2_VBUS_PIN=""
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-sinovoip-bpi-m2"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set

View File

@ -15,6 +15,7 @@ CONFIG_USB1_VBUS_PIN="PD24"
CONFIG_AXP_GPIO=y
CONFIG_SATAPWR="PD25"
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-bananapi-m3"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_CONSOLE_MUX=y
# CONFIG_CMD_FLASH is not set

View File

@ -11,6 +11,7 @@ CONFIG_USB0_VBUS_PIN="PH15"
CONFIG_USB1_VBUS_PIN="PL7"
CONFIG_USB3_VBUS_PIN="PL8"
CONFIG_DEFAULT_DEVICE_TREE="sun9i-a80-cx-a99"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set

View File

@ -19,6 +19,7 @@ CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_TL059WV5C0=y
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-utoo-p66"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -12,6 +12,7 @@ CONFIG_VIDEO_LCD_POWER="PH8"
CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-wexler-tab7200"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -11,6 +11,7 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-wits-pro-a20-dkt"
CONFIG_AHCI=y
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -6,6 +6,7 @@ CONFIG_DRAM_CLK=432
CONFIG_MMC0_CD_PIN="PB3"
CONFIG_USB1_VBUS_PIN="PG12"
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-wobo-i5"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -18,6 +18,7 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set
CONFIG_VIDEO_LCD_PANEL_LVDS=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-yones-toptech-bd1078"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_CMD_FLASH is not set

View File

@ -15,6 +15,7 @@ CONFIG_VIDEO_LCD_BL_EN="PA25"
CONFIG_VIDEO_LCD_BL_PWM="PH13"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-yones-toptech-bs1078-v2"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set

View File

@ -5,6 +5,7 @@ CONFIG_MACH_SUN50I=y
CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-olinuxino"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set

View File

@ -2,6 +2,7 @@ CONFIG_NDS32=y
CONFIG_SYS_TEXT_BASE=0x4A000000
CONFIG_TARGET_ADP_AE3XX=y
CONFIG_DEFAULT_DEVICE_TREE="ae3xx"
CONFIG_NR_DRAM_BANKS=2
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
# CONFIG_AUTO_COMPLETE is not set

View File

@ -2,6 +2,7 @@ CONFIG_NDS32=y
CONFIG_SYS_TEXT_BASE=0x11000000
CONFIG_TARGET_ADP_AG101P=y
CONFIG_DEFAULT_DEVICE_TREE="ag101p"
CONFIG_NR_DRAM_BANKS=2
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
# CONFIG_AUTO_COMPLETE is not set

View File

@ -16,6 +16,7 @@ CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEFAULT_DEVICE_TREE="r8a7794-alt-u-boot"
CONFIG_NR_DRAM_BANKS=1
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_VERSION_VARIABLE=y

View File

@ -6,6 +6,7 @@ CONFIG_SYS_TEXT_BASE=0x80100000
CONFIG_TARGET_AM3517_CRANE=y
CONFIG_EMIF4=y
CONFIG_SPL=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_BOOTDELAY=10
# CONFIG_SPL_EXT_SUPPORT is not set
CONFIG_HUSH_PARSER=y

View File

@ -10,6 +10,7 @@ CONFIG_EMIF4=y
CONFIG_SPL=y
CONFIG_DEFAULT_DEVICE_TREE="am3517-evm"
CONFIG_DISTRO_DEFAULTS=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_BOOTDELAY=10
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_VERSION_VARIABLE=y

View File

@ -10,6 +10,7 @@ CONFIG_SPL_SPI_SUPPORT=y
CONFIG_ARMV7_LPAE=y
CONFIG_DEFAULT_DEVICE_TREE="am572x-idk"
CONFIG_DISTRO_DEFAULTS=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_SPL_LOAD_FIT=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_BOOTARGS=y

View File

@ -14,6 +14,7 @@ CONFIG_SPL_SPI_SUPPORT=y
CONFIG_ARMV7_LPAE=y
CONFIG_DEFAULT_DEVICE_TREE="am57xx-beagle-x15"
CONFIG_DISTRO_DEFAULTS=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_FIT_IMAGE_POST_PROCESS=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y

View File

@ -7,6 +7,7 @@ CONFIG_DRAM_ODT_EN=y
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_VIDEO_DE2 is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-amarula-relic"
CONFIG_NR_DRAM_BANKS=1
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set

View File

@ -4,6 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x80110000
CONFIG_TEGRA124=y
CONFIG_TARGET_APALIS_TK1=y
CONFIG_DEFAULT_DEVICE_TREE="tegra124-apalis"
CONFIG_NR_DRAM_BANKS=2
CONFIG_FIT=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_BOOTDELAY=1

View File

@ -10,6 +10,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
CONFIG_CMD_HDMIDETECT=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q"
CONFIG_BOOTDELAY=1
# CONFIG_CONSOLE_MUX is not set

View File

@ -5,6 +5,7 @@ CONFIG_SYS_TEXT_BASE=0x17800000
CONFIG_TARGET_APALIS_IMX6=y
CONFIG_CMD_HDMIDETECT=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/apalis_imx6/apalis_imx6q.cfg,MX6Q,DDR_MB=1024"
CONFIG_BOOTDELAY=1
# CONFIG_CONSOLE_MUX is not set

View File

@ -5,6 +5,7 @@ CONFIG_SYS_TEXT_BASE=0x17800000
CONFIG_TARGET_APALIS_IMX6=y
CONFIG_CMD_HDMIDETECT=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/apalis_imx6/apalis_imx6q.cfg,MX6Q,DDR_MB=2048"
CONFIG_BOOTDELAY=1
# CONFIG_CONSOLE_MUX is not set

View File

@ -4,6 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x80110000
CONFIG_TEGRA30=y
CONFIG_TARGET_APALIS_T30=y
CONFIG_DEFAULT_DEVICE_TREE="tegra30-apalis"
CONFIG_NR_DRAM_BANKS=2
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y

View File

@ -6,6 +6,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
CONFIG_IDENT_STRING=" apf27 patch 3.10"
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_BOOTDELAY=5
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttySMX0,115200 mtdparts=mxc_nand.0:1M(u-boot)ro,512K(env),512K(env2),512K(firmware),512K(dtb),5M(kernel),-(rootfs) ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs "

View File

@ -7,6 +7,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_TARGET_APX4DEVKIT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_BOOTDELAY=1
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set

View File

@ -2,6 +2,7 @@ CONFIG_ARM=y
CONFIG_ARCH_MX6=y
CONFIG_SYS_TEXT_BASE=0x17800000
CONFIG_TARGET_ARISTAINETOS2=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos2.cfg,MX6DL"
CONFIG_BOOTDELAY=3

View File

@ -2,6 +2,7 @@ CONFIG_ARM=y
CONFIG_ARCH_MX6=y
CONFIG_SYS_TEXT_BASE=0x17800000
CONFIG_TARGET_ARISTAINETOS2B=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos2.cfg,MX6DL"
CONFIG_BOOTDELAY=3

View File

@ -2,6 +2,7 @@ CONFIG_ARM=y
CONFIG_ARCH_MX6=y
CONFIG_SYS_TEXT_BASE=0x17800000
CONFIG_TARGET_ARISTAINETOS=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos.cfg,MX6DL"
CONFIG_BOOTDELAY=3

View File

@ -5,6 +5,7 @@ CONFIG_SYS_TEXT_BASE=0xE80C0000
CONFIG_ARCH_RMOBILE_BOARD_STRING="Armadillo-800EVA Board"
CONFIG_R8A7740=y
CONFIG_TARGET_ARMADILLO_800EVA=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_BOOTDELAY=3
CONFIG_VERSION_VARIABLE=y
# CONFIG_CMDLINE_EDITING is not set

View File

@ -7,6 +7,7 @@ CONFIG_SPL=y
CONFIG_IDENT_STRING=" for ARNDALE"
CONFIG_DEFAULT_DEVICE_TREE="exynos5250-arndale"
CONFIG_DISTRO_DEFAULTS=y
CONFIG_NR_DRAM_BANKS=8
CONFIG_FIT=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_SILENT_CONSOLE=y

View File

@ -2,6 +2,7 @@ CONFIG_ARM=y
CONFIG_TARGET_ASPENITE=y
CONFIG_SYS_TEXT_BASE=0x600000
CONFIG_IDENT_STRING="\nMarvell-Aspenite DB"
CONFIG_NR_DRAM_BANKS=2
CONFIG_BOOTDELAY=3
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y

View File

@ -2,6 +2,7 @@ CONFIG_ARM=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x10000000
CONFIG_TARGET_AT91RM9200EK=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_BOOTDELAY=3
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set

View File

@ -2,6 +2,7 @@ CONFIG_ARM=y
CONFIG_ARCH_AT91=y
CONFIG_SYS_TEXT_BASE=0x20100000
CONFIG_TARGET_AT91RM9200EK=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT"
CONFIG_BOOTDELAY=3
# CONFIG_DISPLAY_CPUINFO is not set

View File

@ -8,6 +8,7 @@ CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_DEFAULT_DEVICE_TREE="at91sam9260ek"
CONFIG_DEBUG_UART=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260,SYS_USE_DATAFLASH_CS0"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y

View File

@ -8,6 +8,7 @@ CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_DEFAULT_DEVICE_TREE="at91sam9260ek"
CONFIG_DEBUG_UART=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260,SYS_USE_DATAFLASH_CS1"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y

Some files were not shown because too many files have changed in this diff Show More