brain-hackers_pepepper-mirror
/
u-boot-brain
mirror of https://github.com/brain-hackers/u-boot-brain
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

spi: Convert CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI* 

This change allows more fine tuning of driver model based SPI support in
SPL and TPL. It is now possible to explicitly enable/disable the DM_SPI
support in SPL and TPL via Kconfig option.

Before this change it was necessary to use:
    /* SPI Flash Configs */
    #if defined(CONFIG_SPL_BUILD)
    #undef CONFIG_DM_SPI
    #undef CONFIG_DM_SPI_FLASH
    #undef CONFIG_SPI_FLASH_MTD
    #endif

in the ./include/configs/<board>.h, which is error prone and shall be
avoided when we strive to switch to Kconfig.

The goal of this patch:

Provide distinction for DM_SPI support in both U-Boot proper and SPL (TPL).
Valid use case is when U-Boot proper wants to use DM_SPI, but SPL must
still support non DM driver.

Another use case is the conversion of non DM/DTS SPI driver to support
DM/DTS. When such driver needs to work in both SPL and U-Boot proper, the
distinction is needed in Kconfig (also if SPL version of the driver
supports OF_PLATDATA).

In the end of the day one would have to support following use cases (in
single driver file - e.g. mxs_spi.c):

- U-Boot proper driver supporting DT/DTS
- U-Boot proper driver without DT/DTS support (deprecated)
- SPL driver without DT/DTS support
- SPL (and TPL) driver with DT/DTS (when the SoC has enough resources to
  run full blown DT/DTS)
- SPL driver with DT/DTS and SPL_OF_PLATDATA (when one have constrained
  environment with no fitImage and OF_LIBFDT support).

Some boards do require SPI support (with DM) in SPL (TPL) and some only
have DM_SPI{_FLASH} defined to allow compiling SPL.

This patch converts #ifdef CONFIG_DM_SPI* to #if CONFIG_IS_ENABLED(DM_SPI)
and provides corresponding defines in Kconfig.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Adam Ford <aford173@gmail.com> #da850-evm
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
[trini: Fixup a few platforms]
Signed-off-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Lukasz Majewski 2020-06-04 23:11:53 +08:00 committed by Tom Rini
parent c87f9ce227
commit 56c4046038
59 changed files with 122 additions and 28 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
arch/arm/Kconfig
View File

@ -549,6 +549,7 @@ config TARGET_GPLUGD
config ARCH_DAVINCI
bool "TI DaVinci"
select CPU_ARM926EJS
select SPL_DM_SPI if SPL
imply CMD_SAVES
help
Support for TI's DaVinci platform.
@ -566,6 +567,8 @@ config ARCH_MVEBU
select DM_SERIAL
select DM_SPI
select DM_SPI_FLASH
select SPL_DM_SPI if SPL
select SPL_DM_SPI_FLASH if SPL
select OF_CONTROL
select OF_SEPARATE
select SPI
@ -985,6 +988,8 @@ config ARCH_SOCFPGA
imply FAT_WRITE
imply SPL
imply SPL_DM
imply SPL_DM_SPI
imply SPL_DM_SPI_FLASH
imply SPL_LIBDISK_SUPPORT
imply SPL_MMC_SUPPORT
imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
@ -1093,6 +1098,8 @@ config ARCH_ZYNQ
select SPL_BOARD_INIT if SPL
select SPL_CLK if SPL
select SPL_DM if SPL
select SPL_DM_SPI if SPL
select SPL_DM_SPI_FLASH if SPL
select SPL_OF_CONTROL if SPL
select SPL_SEPARATE_BSS if SPL
select SUPPORT_SPL
@ -1131,6 +1138,8 @@ config ARCH_ZYNQMP
select OF_CONTROL
select SPL_BOARD_INIT if SPL
select SPL_CLK if SPL
select SPL_DM_SPI if SPI
select SPL_DM_SPI_FLASH if SPL_DM_SPI
select SPL_DM_MAILBOX if SPL
select SPL_FIRMWARE if SPL
select SPL_SEPARATE_BSS if SPL
@ -1680,6 +1689,8 @@ config ARCH_ROCKCHIP
select OF_CONTROL
select SPI
select SPL_DM if SPL
select SPL_DM_SPI if SPL
select SPL_DM_SPI_FLASH if SPL
select SYS_MALLOC_F
select SYS_THUMB_BUILD if !ARM64
imply ADC

4
board/l+g/vinco/vinco.c
View File

@ -34,7 +34,7 @@
DECLARE_GLOBAL_DATA_PTR;
/* FIXME gpio code here need to handle through DM_GPIO */
#ifndef CONFIG_DM_SPI
#if !CONFIG_IS_ENABLED(DM_SPI)
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
{
return bus == 0 && cs == 0;
@ -167,7 +167,7 @@ int board_init(void)
/* adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
#ifndef CONFIG_DM_SPI
#if !CONFIG_IS_ENABLED(DM_SPI)
vinco_spi0_hw_init();
#endif

4
cmd/sf.c
View File

@ -91,7 +91,7 @@ static int do_spi_flash_probe(int argc, char *const argv[])
unsigned int speed = CONFIG_SF_DEFAULT_SPEED;
unsigned int mode = CONFIG_SF_DEFAULT_MODE;
char *endp;
#ifdef CONFIG_DM_SPI_FLASH
#if CONFIG_IS_ENABLED(DM_SPI_FLASH)
struct udevice *new, *bus_dev;
int ret;
#else
@ -124,7 +124,7 @@ static int do_spi_flash_probe(int argc, char *const argv[])
return -1;
}
#ifdef CONFIG_DM_SPI_FLASH
#if CONFIG_IS_ENABLED(DM_SPI_FLASH)
/* Remove the old device, otherwise probe will just be a nop */
ret = spi_find_bus_and_cs(bus, cs, &bus_dev, &new);
if (!ret) {

6
cmd/spi.c
View File

@ -38,7 +38,7 @@ static int do_spi_xfer(int bus, int cs)
struct spi_slave *slave;
int ret = 0;
#ifdef CONFIG_DM_SPI
#if CONFIG_IS_ENABLED(DM_SPI)
char name[30], *str;
struct udevice *dev;
@ -63,7 +63,7 @@ static int do_spi_xfer(int bus, int cs)
goto done;
ret = spi_xfer(slave, bitlen, dout, din,
SPI_XFER_BEGIN | SPI_XFER_END);
#ifndef CONFIG_DM_SPI
#if !CONFIG_IS_ENABLED(DM_SPI)
/* We don't get an error code in this case */
if (ret)
ret = -EIO;
@ -79,7 +79,7 @@ static int do_spi_xfer(int bus, int cs)
}
done:
spi_release_bus(slave);
#ifndef CONFIG_DM_SPI
#if !CONFIG_IS_ENABLED(DM_SPI)
spi_free_slave(slave);
#endif

20
common/spl/Kconfig
View File

@ -756,6 +756,11 @@ config SPL_DM_SPI
help
Enable support for SPI DM drivers in SPL.
config SPL_DM_SPI_FLASH
bool "Support SPI DM FLASH drivers in SPL"
help
Enable support for SPI DM flash drivers in SPL.
endif
if SPL_UBI
config SPL_UBI_LOAD_BY_VOLNAME
@ -1092,6 +1097,11 @@ config SPL_SPI_FLASH_SFDP_SUPPORT
SPI NOR flashes using Serial Flash Discoverable Parameters (SFDP)
tables as per JESD216 standard in SPL.
config SPL_SPI_FLASH_MTD
bool "Support for SPI flash MTD drivers in SPL"
help
Enable support for SPI flash MTD drivers in SPL.
config SPL_SPI_LOAD
bool "Support loading from SPI flash"
help
@ -1499,6 +1509,16 @@ config TPL_SPI_SUPPORT
Enable support for using SPI in TPL. See SPL_SPI_SUPPORT for
details.
config TPL_DM_SPI
bool "Support SPI DM drivers in TPL"
help
Enable support for SPI DM drivers in TPL.
config TPL_DM_SPI_FLASH
bool "Support SPI DM FLASH drivers in TPL"
help
Enable support for SPI DM flash drivers in TPL.
config TPL_YMODEM_SUPPORT
bool "Support loading using Ymodem"
depends on TPL_SERIAL_SUPPORT

2
configs/am57xx_evm_defconfig
View File

@ -78,6 +78,7 @@ CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_OMAP_HS=y
CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SF_DEFAULT_MODE=0
CONFIG_SF_DEFAULT_SPEED=76800000
CONFIG_SPI_FLASH_SPANSION=y
@ -96,6 +97,7 @@ CONFIG_DM_SCSI=y
CONFIG_DM_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_SPL_DM_SPI=y
CONFIG_TI_QSPI=y
CONFIG_USB=y
CONFIG_DM_USB=y

2
configs/am57xx_hs_evm_defconfig
View File

@ -74,6 +74,7 @@ CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_OMAP_HS=y
CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SF_DEFAULT_MODE=0
CONFIG_SF_DEFAULT_SPEED=76800000
CONFIG_SPI_FLASH_SPANSION=y
@ -92,6 +93,7 @@ CONFIG_DM_SCSI=y
CONFIG_DM_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_SPL_DM_SPI=y
CONFIG_TI_QSPI=y
CONFIG_USB=y
CONFIG_DM_USB=y

2
configs/am57xx_hs_evm_usb_defconfig
View File

@ -80,6 +80,7 @@ CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_OMAP_HS=y
CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SF_DEFAULT_MODE=0
CONFIG_SF_DEFAULT_SPEED=76800000
CONFIG_SPI_FLASH_BAR=y
@ -99,6 +100,7 @@ CONFIG_DM_REGULATOR_PALMAS=y
CONFIG_DM_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_SPL_DM_SPI=y
CONFIG_TI_QSPI=y
CONFIG_USB=y
CONFIG_DM_USB=y

1
configs/am65x_evm_a53_defconfig
View File

@ -37,6 +37,7 @@ CONFIG_SPL_DMA=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_DM_MAILBOX=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_DM_RESET=y
CONFIG_SPL_POWER_DOMAIN=y
# CONFIG_SPL_SPI_FLASH_TINY is not set

1
configs/am65x_evm_r5_defconfig
View File

@ -33,6 +33,7 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400
CONFIG_SPL_DMA=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_DM_MAILBOX=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_DM_RESET=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_POWER_DOMAIN=y

1
configs/am65x_hs_evm_a53_defconfig
View File

@ -40,6 +40,7 @@ CONFIG_SPL_DMA=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_DM_MAILBOX=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_DM_RESET=y
CONFIG_SPL_POWER_DOMAIN=y
# CONFIG_SPL_SPI_FLASH_TINY is not set

1
configs/am65x_hs_evm_r5_defconfig
View File

@ -35,6 +35,7 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400
CONFIG_SPL_DMA=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_DM_MAILBOX=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_DM_RESET=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_POWER_DOMAIN=y

2
configs/axm_defconfig
View File

@ -65,6 +65,8 @@ CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
CONFIG_NAND_ATMEL=y
CONFIG_SPL_DM_SPI=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_PHYLIB=y

1
configs/brppt1_spi_defconfig
View File

@ -39,6 +39,7 @@ CONFIG_SPL_SEPARATE_BSS=y
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_SPL_WATCHDOG_SUPPORT=y

1
configs/brppt2_defconfig
View File

@ -33,6 +33,7 @@ CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_BOARD_INIT=y
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y

1
configs/brsmarc1_defconfig
View File

@ -39,6 +39,7 @@ CONFIG_SPL_SEPARATE_BSS=y
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
CONFIG_SPL_I2C_SUPPORT=y
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_SPL_YMODEM_SUPPORT=y

1
configs/chromebook_coral_defconfig
View File

@ -37,6 +37,7 @@ CONFIG_HANDOFF=y
CONFIG_TPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_CPU_SUPPORT=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_PCI=y
# CONFIG_SPL_SPI_FLASH_TINY is not set
CONFIG_HUSH_PARSER=y

2
configs/chromebook_link64_defconfig
View File

@ -31,6 +31,8 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_CPU_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_DM_SPI=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_NET_SUPPORT=y
CONFIG_SPL_PCI=y
CONFIG_SPL_PCH_SUPPORT=y

4
configs/chromebook_samus_tpl_defconfig
View File

@ -32,11 +32,15 @@ CONFIG_BLOBLIST_SIZE=0x1000
CONFIG_BLOBLIST_ADDR=0xff7c0000
CONFIG_HANDOFF=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_DM_SPI=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_NET_SUPPORT=y
CONFIG_SPL_PCI=y
CONFIG_SPL_PCH_SUPPORT=y
CONFIG_TPL_PCI=y
CONFIG_TPL_PCH_SUPPORT=y
CONFIG_TPL_DM_SPI=y
CONFIG_TPL_DM_SPI_FLASH=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_CPU=y
CONFIG_CMD_GPIO=y

1
configs/cm_t43_defconfig
View File

@ -31,6 +31,7 @@ CONFIG_SPL_FS_EXT4=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_MTD_SUPPORT=y
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_SYS_PROMPT="CM-T43 # "

1
configs/da850evm_defconfig
View File

@ -30,6 +30,7 @@ CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot > "

2
configs/dra7xx_evm_defconfig
View File

@ -84,6 +84,7 @@ CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SF_DEFAULT_MODE=0
CONFIG_SF_DEFAULT_SPEED=76800000
CONFIG_SPI_FLASH_SPANSION=y
@ -106,6 +107,7 @@ CONFIG_DM_SCSI=y
CONFIG_DM_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_SPL_DM_SPI=y
CONFIG_TI_QSPI=y
CONFIG_TIMER=y
CONFIG_OMAP_TIMER=y

2
configs/dra7xx_hs_evm_defconfig
View File

@ -87,6 +87,7 @@ CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SF_DEFAULT_MODE=0
CONFIG_SF_DEFAULT_SPEED=76800000
CONFIG_SPI_FLASH_SPANSION=y
@ -109,6 +110,7 @@ CONFIG_DM_SCSI=y
CONFIG_DM_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_SPL_DM_SPI=y
CONFIG_TI_QSPI=y
CONFIG_TIMER=y
CONFIG_OMAP_TIMER=y

2
configs/dra7xx_hs_evm_usb_defconfig
View File

@ -84,6 +84,7 @@ CONFIG_SPL_MMC_HS200_SUPPORT=y
CONFIG_MMC_OMAP_HS=y
CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SF_DEFAULT_MODE=0
CONFIG_SF_DEFAULT_SPEED=76800000
CONFIG_SPI_FLASH_BAR=y
@ -106,6 +107,7 @@ CONFIG_DM_SCSI=y
CONFIG_DM_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_SPL_DM_SPI=y
CONFIG_TI_QSPI=y
CONFIG_TIMER=y
CONFIG_OMAP_TIMER=y

1
configs/imx28_xea_defconfig
View File

@ -33,6 +33,7 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0
CONFIG_SUPPORT_EMMC_BOOT_OVERRIDE_PART_CONFIG=y
CONFIG_SPL_DMA=y
CONFIG_SPL_MMC_TINY=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_HUSH_PARSER=y

2
configs/j721e_evm_a72_defconfig
View File

@ -121,6 +121,7 @@ CONFIG_FLASH_CFI_MTD=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_HBMC_AM654=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_SPI_FLASH_MTD=y
@ -147,6 +148,7 @@ CONFIG_DM_SERIAL=y
CONFIG_SOC_TI=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_SPL_DM_SPI=y
CONFIG_CADENCE_QSPI=y
CONFIG_SYSRESET=y
CONFIG_SPL_SYSRESET=y

2
configs/j721e_evm_r5_defconfig
View File

@ -90,6 +90,7 @@ CONFIG_SPL_MMC_SDHCI_ADMA=y
CONFIG_MMC_SDHCI_AM654=y
CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_SFDP_SUPPORT=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_PINCTRL=y
@ -113,6 +114,7 @@ CONFIG_DM_SERIAL=y
CONFIG_SOC_TI=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_SPL_DM_SPI=y
CONFIG_CADENCE_QSPI=y
CONFIG_SYSRESET=y
CONFIG_SPL_SYSRESET=y

1
configs/j721e_hs_evm_a72_defconfig
View File

@ -35,6 +35,7 @@ CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_DM_MAILBOX=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_DM_RESET=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_POWER_DOMAIN=y

1
configs/j721e_hs_evm_r5_defconfig
View File

@ -34,6 +34,7 @@ CONFIG_SPL_DMA=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_DM_MAILBOX=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_DM_RESET=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_POWER_DOMAIN=y

1
configs/k2e_evm_defconfig
View File

@ -24,6 +24,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_CMD_MX_CYCLIC=y

1
configs/k2hk_evm_defconfig
View File

@ -24,6 +24,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_CMD_MX_CYCLIC=y

1
configs/k2l_evm_defconfig
View File

@ -24,6 +24,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_CMD_MX_CYCLIC=y

2
configs/ls1021aiot_qspi_defconfig
View File

@ -23,6 +23,7 @@ CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_CMD_SF=y
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="ls1021a-iot-duart"
CONFIG_ENV_IS_IN_SPI_FLASH=y
@ -50,6 +51,7 @@ CONFIG_DM_SCSI=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_SPL_DM_SPI=y
CONFIG_FSL_DSPI=y
CONFIG_FSL_QSPI=y
CONFIG_USB=y

2
configs/ls1021aiot_sdcard_defconfig
View File

@ -28,6 +28,7 @@ CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_CMD_SF=y
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="ls1021a-iot-duart"
@ -56,6 +57,7 @@ CONFIG_DM_SCSI=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_SPL_DM_SPI=y
CONFIG_FSL_DSPI=y
CONFIG_FSL_QSPI=y
CONFIG_USB=y

1
configs/ls1021aqds_qspi_defconfig
View File

@ -64,6 +64,7 @@ CONFIG_DM_SCSI=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_SPL_DM_SPI=y
CONFIG_FSL_DSPI=y
CONFIG_FSL_QSPI=y
CONFIG_USB=y

1
configs/ls1021aqds_sdcard_qspi_defconfig
View File

@ -76,6 +76,7 @@ CONFIG_DM_SCSI=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_SPL_DM_SPIy=y
CONFIG_FSL_DSPI=y
CONFIG_FSL_QSPI=y
CONFIG_USB=y

1
configs/ls1021atwr_qspi_defconfig
View File

@ -62,6 +62,7 @@ CONFIG_DM_SCSI=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_SPI_DM_SPI=y
CONFIG_FSL_DSPI=y
CONFIG_FSL_QSPI=y
CONFIG_USB=y

1
configs/qemu-x86_64_defconfig
View File

@ -32,6 +32,7 @@ CONFIG_PCI_INIT_R=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_CPU_SUPPORT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_NET_SUPPORT=y
CONFIG_SPL_PCI=y
CONFIG_SPL_PCH_SUPPORT=y

1
configs/sama5d27_wlsom1_ek_qspiflash_defconfig
View File

@ -33,6 +33,7 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_DISPLAY_PRINT=y
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_SPL_AT91_MCK_BYPASS=y
CONFIG_HUSH_PARSER=y

2
configs/sama5d2_xplained_spiflash_defconfig
View File

@ -67,6 +67,8 @@ CONFIG_DM_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ATMEL=y
CONFIG_MTD=y
CONFIG_SPL_DM_SPI=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SF_DEFAULT_SPEED=30000000
CONFIG_SPI_FLASH_ATMEL=y

2
configs/sama5d3xek_spiflash_defconfig
View File

@ -23,6 +23,7 @@ CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_TEXT_BASE=0x300000
CONFIG_SPL_DM_SPI=y
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_FIT=y
@ -31,6 +32,7 @@ CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256K(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs"
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y

2
configs/sama5d4_xplained_spiflash_defconfig
View File

@ -68,6 +68,7 @@ CONFIG_MTD_RAW_NAND=y
# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
CONFIG_NAND_ATMEL=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SF_DEFAULT_SPEED=30000000
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_DM_ETH=y
@ -80,6 +81,7 @@ CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_ATMEL_USART=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_SPL_DM_SPI=y
CONFIG_TIMER=y
CONFIG_SPL_TIMER=y
CONFIG_ATMEL_PIT_TIMER=y

2
configs/sama5d4ek_spiflash_defconfig
View File

@ -65,6 +65,7 @@ CONFIG_MTD_RAW_NAND=y
# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
CONFIG_NAND_ATMEL=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SF_DEFAULT_SPEED=30000000
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_DM_ETH=y
@ -77,6 +78,7 @@ CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_ATMEL_USART=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_SPL_DM_SPI=y
CONFIG_TIMER=y
CONFIG_SPL_TIMER=y
CONFIG_ATMEL_PIT_TIMER=y

2
configs/stm32mp15_basic_defconfig
View File

@ -91,6 +91,7 @@ CONFIG_MTD_RAW_NAND=y
CONFIG_NAND_STM32_FMC2=y
CONFIG_MTD_SPI_NAND=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
@ -121,6 +122,7 @@ CONFIG_RTC_STM32=y
CONFIG_SERIAL_RX_BUFFER=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_SPL_DM_SPI=y
CONFIG_STM32_QSPI=y
CONFIG_STM32_SPI=y
CONFIG_USB=y

1
configs/stm32mp15_dhcom_basic_defconfig
View File

@ -93,6 +93,7 @@ CONFIG_STM32_SDMMC2=y
CONFIG_MTD=y
CONFIG_SYS_MTDPARTS_RUNTIME=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y

1
configs/stm32mp15_dhcor_basic_defconfig
View File

@ -89,6 +89,7 @@ CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_STM32_SDMMC2=y
CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y

2
configs/taurus_defconfig
View File

@ -73,6 +73,8 @@ CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
CONFIG_NAND_ATMEL=y
CONFIG_SPL_DM_SPI=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_PHYLIB=y

4
drivers/mtd/spi/Makefile
View File

@ -3,7 +3,7 @@
# (C) Copyright 2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
obj-$(CONFIG_DM_SPI_FLASH) += sf-uclass.o
obj-$(CONFIG_$(SPL_TPL_)DM_SPI_FLASH) += sf-uclass.o
spi-nor-y := sf_probe.o spi-nor-ids.o
ifdef CONFIG_SPL_BUILD
@ -19,5 +19,5 @@ endif
obj-$(CONFIG_SPI_FLASH) += spi-nor.o
obj-$(CONFIG_SPI_FLASH_DATAFLASH) += sf_dataflash.o
obj-$(CONFIG_$(SPL_)SPI_FLASH_MTD) += sf_mtd.o
obj-$(CONFIG_$(SPL_TPL_)SPI_FLASH_MTD) += sf_mtd.o
obj-$(CONFIG_SPI_FLASH_SANDBOX) += sandbox.o

2
drivers/mtd/spi/sf_probe.c
View File

@ -53,7 +53,7 @@ err_read_id:
return ret;
}
#ifndef CONFIG_DM_SPI_FLASH
#if !CONFIG_IS_ENABLED(DM_SPI_FLASH)
struct spi_flash *spi_flash_probe(unsigned int busnum, unsigned int cs,
unsigned int max_hz, unsigned int spi_mode)
{

4
drivers/net/fm/fm.c
View File

@ -383,7 +383,7 @@ int fm_init_common(int index, struct ccsr_fman *reg)
addr = malloc(CONFIG_SYS_QE_FMAN_FW_LENGTH);
int ret = 0;
#ifdef CONFIG_DM_SPI_FLASH
#if CONFIG_IS_ENABLED(DM_SPI_FLASH)
struct udevice *new;
/* speed and mode will be read from DT */
@ -470,7 +470,7 @@ int fm_init_common(int index, struct ccsr_fman *reg)
void *addr = malloc(CONFIG_SYS_QE_FMAN_FW_LENGTH);
int ret = 0;
#ifdef CONFIG_DM_SPI_FLASH
#if CONFIG_IS_ENABLED(DM_SPI_FLASH)
struct udevice *new;
/* speed and mode will be read from DT */

2
drivers/spi/Makefile
View File

@ -4,7 +4,7 @@
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
# There are many options which enable SPI, so make this library available
ifdef CONFIG_DM_SPI
ifdef CONFIG_$(SPL_TPL_)DM_SPI
obj-y += spi-uclass.o
obj-$(CONFIG_SANDBOX) += spi-emul-uclass.o
obj-$(CONFIG_SOFT_SPI) += soft_spi.o

2
drivers/spi/kirkwood_spi.c
View File

@ -94,7 +94,7 @@ static int _spi_xfer(struct kwspi_registers *reg, unsigned int bitlen,
return 0;
}
#ifndef CONFIG_DM_SPI
#if !CONFIG_IS_ENABLED(DM_SPI)
static struct kwspi_registers *spireg =
(struct kwspi_registers *)MVEBU_SPI_BASE;

6
drivers/spi/mxc_spi.c
View File

@ -67,7 +67,7 @@ static inline struct mxc_spi_slave *to_mxc_spi_slave(struct spi_slave *slave)
static void mxc_spi_cs_activate(struct mxc_spi_slave *mxcs)
{
#if defined(CONFIG_DM_SPI)
#if CONFIG_IS_ENABLED(DM_SPI)
struct udevice *dev = mxcs->dev;
struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
@ -85,7 +85,7 @@ static void mxc_spi_cs_activate(struct mxc_spi_slave *mxcs)
static void mxc_spi_cs_deactivate(struct mxc_spi_slave *mxcs)
{
#if defined(CONFIG_DM_SPI)
#if CONFIG_IS_ENABLED(DM_SPI)
struct udevice *dev = mxcs->dev;
struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
@ -415,7 +415,7 @@ static int mxc_spi_claim_bus_internal(struct mxc_spi_slave *mxcs, int cs)
return 0;
}
#ifndef CONFIG_DM_SPI
#if !CONFIG_IS_ENABLED(DM_SPI)
int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
void *din, unsigned long flags)
{

4
drivers/spi/omap3_spi.c
View File

@ -109,7 +109,7 @@ struct mcspi {
};
struct omap3_spi_priv {
#ifndef CONFIG_DM_SPI
#if !CONFIG_IS_ENABLED(DM_SPI)
struct spi_slave slave;
#endif
struct mcspi *regs;
@ -455,7 +455,7 @@ static void _omap3_spi_claim_bus(struct omap3_spi_priv *priv)
writel(conf, &priv->regs->modulctrl);
}
#ifndef CONFIG_DM_SPI
#if !CONFIG_IS_ENABLED(DM_SPI)
static inline struct omap3_spi_priv *to_omap3_spi(struct spi_slave *slave)
{

4
drivers/spi/sh_qspi.c
View File

@ -68,7 +68,7 @@ struct sh_qspi_regs {
};
struct sh_qspi_slave {
#ifndef CONFIG_DM_SPI
#if !CONFIG_IS_ENABLED(DM_SPI)
struct spi_slave slave;
#endif
struct sh_qspi_regs *regs;
@ -223,7 +223,7 @@ static int sh_qspi_xfer_common(struct sh_qspi_slave *ss, unsigned int bitlen,
return ret;
}
#ifndef CONFIG_DM_SPI
#if !CONFIG_IS_ENABLED(DM_SPI)
static inline struct sh_qspi_slave *to_sh_qspi(struct spi_slave *slave)
{
return container_of(slave, struct sh_qspi_slave, slave);

2
env/sf.c vendored
View File

@ -38,7 +38,7 @@ static struct spi_flash *env_flash;
static int setup_flash_device(void)
{
#ifdef CONFIG_DM_SPI_FLASH
#if CONFIG_IS_ENABLED(DM_SPI_FLASH)
struct udevice *new;
int ret;

8
include/spi.h
View File

@ -39,7 +39,7 @@
#define SPI_DEFAULT_WORDLEN 8
#ifdef CONFIG_DM_SPI
#if CONFIG_IS_ENABLED(DM_SPI)
/* TODO(sjg@chromium.org): Remove this and use max_hz from struct spi_slave */
struct dm_spi_bus {
uint max_hz;
@ -131,7 +131,7 @@ enum spi_polarity {
* @flags: Indication of SPI flags.
*/
struct spi_slave {
#ifdef CONFIG_DM_SPI
#if CONFIG_IS_ENABLED(DM_SPI)
struct udevice *dev; /* struct spi_slave is dev->parentdata */
uint max_hz;
uint speed;
@ -317,7 +317,7 @@ void spi_flash_copy_mmap(void *data, void *offset, size_t len);
*/
int spi_cs_is_valid(unsigned int bus, unsigned int cs);
#ifndef CONFIG_DM_SPI
#if !CONFIG_IS_ENABLED(DM_SPI)
/**
* Activate a SPI chipselect.
* This function is provided by the board code when using a driver
@ -367,7 +367,7 @@ static inline int spi_w8r8(struct spi_slave *slave, unsigned char byte)
return ret < 0 ? ret : din[1];
}
#ifdef CONFIG_DM_SPI
#if CONFIG_IS_ENABLED(DM_SPI)
/**
* struct spi_cs_info - Information about a bus chip select

2
include/spi_flash.h
View File

@ -39,7 +39,7 @@ struct dm_spi_flash_ops {
/* Access the serial operations for a device */
#define sf_get_ops(dev) ((struct dm_spi_flash_ops *)(dev)->driver->ops)
#ifdef CONFIG_DM_SPI_FLASH
#if CONFIG_IS_ENABLED(DM_SPI_FLASH)
/**
* spi_flash_read_dm() - Read data from SPI flash
*

2
test/dm/spi.c
View File

@ -117,7 +117,7 @@ static int dm_test_spi_xfer(struct unit_test_state *uts)
* Since we are about to destroy all devices, we must tell sandbox
* to forget the emulation device
*/
#ifdef CONFIG_DM_SPI_FLASH
#if CONFIG_IS_ENABLED(DM_SPI_FLASH)
sandbox_sf_unbind_emul(state_get_current(), busnum, cs);
#endif