Commit Graph

62044 Commits

Author SHA1 Message Date
Baruch Siach
730e6a0ca1 arm: dts: hummingboard: add cubox/hummingboard DT (part 1 of 2)
These DT files are copied from kernel v5.3 with no changes.

This is part 1 of 2 commits. Included are DT files for the original
Cubox-i and Hummingboard Base/Pro.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-01-07 10:26:56 +01:00
Baruch Siach
e01030767e dt-bindings: add imx-audmux macro definitions
Import fsl-imx-audmux.h from Linux as of v5.4-rc6. The header is
unchanged since v4.18.

That would make it easier to import DT files that depend on imx-audmux
definitions from the kernel tree.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-01-07 10:26:56 +01:00
Robert Beckett
7915e150d6 board: ge: mx53ppd: use imx wdt
Enable DM imx WDT
Enable SYSRESET_WATCHDOG to maintain WDT based reset ability

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-07 10:26:56 +01:00
Robert Beckett
d494aeca46 board: ge: bx50v3: use imx wdt
Enable DM imx WDT
Enable SYSRESET_WATCHDOG to maintain WDT based reset ability

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-07 10:26:56 +01:00
Ian Ray
b186cfa1a3 board: ge: pass rtc_status via device tree
Pass rtc_status via the device tree, instead of on kernel command line.
Additionally, the 2038 mitigation is reported, if applied successfully.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-07 10:26:56 +01:00
Denis Zalevskiy
b565b18a29 board: ge: bx50v3: Enable DM for PCI and ethernet
DM for PCI pulls DM for ethernet that also needs other changes described
below to build u-boot and keep existing functionality - ability to update
MAC addresses of FEC ethernet adapter and I210 adapter connected to the
Marvell switch.

- fec_mxc driver with DM needs PHYLIB;

- configuration items are moved from ge_bx50v3.h to ge_bx50v3_defconfig;

- FEC is marked as eth0 because it is always present, so indices changed:
  I210 are still probed in the same order;

- board_eth_init() was used by legacy ethernet, setup for enet iomux and
  pcie is moved to the board_late_init();

- pci_init() is called from the board_late_init() to initiate PCI bus
  probing, so I210 devices are propagated to the device tree;

Signed-off-by: Denis Zalevskiy <denis.zalevskiy@ge.com>
[Describe PHY reset in device tree]
Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-07 10:26:56 +01:00
Denis Zalevskiy
833dd6444b configs: ppd: DM for USB and regulators PPD
DM should be used for USB since 2019.07, it also requires DM for
regulators.

Signed-off-by: Denis Zalevskiy <denis.zalevskiy@ge.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-07 10:26:56 +01:00
Ian Ray
c6b31ca186 board: ge: bx50v3: Fix message output to video console
Use vidconsole for output to the LCD, now that DM_VIDEO is used.  Write
white text on a black background, like before migrating to DM_VIDEO.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-07 10:26:56 +01:00
Ian Ray
08ecab0c47 board: ge: bx50v3: Fix run-time warning
Fix GPIO reservation warning on code paths that do not need LVDS power.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-07 10:26:56 +01:00
Ian Ray
05de20082d configs: bx50v3: Fix boot hang with video
Fixes commit: 0b09f7b150, which converted
to DM_VIDEO, but requires more memory.

[Inspired by 9002e735e7]

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-07 10:26:56 +01:00
Robert Beckett
6388f9921a board: ge: ppd: sync device tree from Linux
Copy device tree from linux for PPD.

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-07 10:26:56 +01:00
Robert Beckett
8c26739859 board: ge: bx50v3: sync devicetrees from Linux
Copy device trees from linux, keeping them as separate files for
each board to ease future sync.

Update board code to use generic bx50v3 dt initially, then select
the specific dt based on board detection.

Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-07 10:26:56 +01:00
Lukasz Majewski
010e58d448 imx: Add support for i.MX28 based XEA board
This patch introduces support for i.MX28 based XEA board.

This board supports DM/DTS in U-Boot proper as well as DM aware drivers
in SPL (u-boot.sb) by using OF_PLATDATA.
More detailed information regarding usage of it can be found in
./board/liebherr/xea/README file.

U-Boot SPL 2019.10-rc1-00233-g6aa549f05c (Aug 12 2019 - 09:23:36 +0200)
Trying to boot from MMC1
MMC0: Command 8 timeout (status 0xf0344020)
mmc_load_image_raw_sector: mmc block read error

U-Boot 2019.10-rc1-00233-g6aa549f05c (Aug 12 2019 - 09:23:36 +0200)

CPU:   Freescale i.MX28 rev1.2 at 454 MHz
BOOT:  SSP SPI #3, master, 3V3 NOR
Model: Liebherr (LWE) XEA i.MX28 Board
DRAM:  128 MiB
MMC:   MXS MMC: 0
Loading Environment from SPI Flash... SF: Detected n25q128a13 with page size 256 Bytes, erase size 64 KiB, total 16 MiB
OK
In:    serial
Out:   serial
Err:   serial
Net:
Warning: ethernet@800f0000 (eth0) using random MAC address - ce:e1:9e:46:f3:a2
eth0: ethernet@800f0000
Hit any key to stop autoboot:  0

Signed-off-by: Lukasz Majewski <lukma@denx.de>
2020-01-07 10:26:56 +01:00
Heiko Schocher
227cb30047 imx6: aristainetos: add support for rev C board
add support for revision C boards. This board has
no longer a NAND.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:56 +01:00
Heiko Schocher
c08aa77173 imx6: aristainetos: add aristainetos 2b csl
add aristainetso board version CSL.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:56 +01:00
Heiko Schocher
1204b9675e imx6: aristainetos: readd aristainetos 2b board
readd aristainetos 2b board.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:56 +01:00
Heiko Schocher
1c9c4642c3 imx6: aristainetos: enable HAB boot
enable IMX_HAB on aristianetos board

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:56 +01:00
Heiko Schocher
70be2fcadc imx6: aristainetos: cleanup default Environment
sync defaut Envoronment with customer changes.
Unfortunately they are not changeable, as already
board is in production mode.

Get rid of the big bootcommand and set bootcommand
through Kconfig option.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:56 +01:00
Heiko Schocher
445c230814 imx6: aristainetos: WDT DM conversion enable WDT reset
enable config symbols:
CONFIG_SYSRESET
CONFIG_SYSRESET_WATCHDOG

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:56 +01:00
Heiko Schocher
0ed133a6c4 imx6: aristainetos: cleanup bootmode settings
on the aristainetos there are some jumpers for
changing behaviour setting up Environment. Clean
this up.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:56 +01:00
Heiko Schocher
a450859af5 imx6: aristainetos: add version variable
add VERSION_VARIABLE

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:55 +01:00
Heiko Schocher
6a82579bdd imx6: aristainetos: add AUTOBOOT_KEYED
add stop autobooting via SHA256 encrypted password.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:55 +01:00
Heiko Schocher
f7cf76f8ac imx6: aristainetos: add i2c eeprom support
add support for i2c eeprom and add parsing "Rescue"
or "DefEnv" at offset 0x1ff0.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:55 +01:00
Heiko Schocher
44184c2aa8 imx6: aristainetos: get rid of CONFIG_BOARDNAME
CONFIG_BOARDNAME is not longer needed, as we use
the model information from DTS.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:55 +01:00
Heiko Schocher
87b687ad9d imx6: aristainetos: convert to DM_PWM/DM_BACKLIGHT
use DM_PWM and DM_BLACKLIGHT support and remove
board code.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:55 +01:00
Heiko Schocher
b9d4b64e44 imx6: aristainetos: add DM_I2C support
enable DM_I2C in defconfig and remove i2c specific
board code.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:55 +01:00
Heiko Schocher
621ff1363c imx6: aristainetos: add DM_VIDEO support
add DM_VIDEO support and remove now unneeded board
code. As we show a bmp logo on boot, call now
bmp_display() from board code and do not use
cfb_console anymore.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:55 +01:00
Heiko Schocher
5e65496d80 imx6: aristainetos: enable DM_ETH
enable DM_ETH and remove unneeded board code.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:55 +01:00
Heiko Schocher
cf8cbb0709 imx6: aristainetos: convert CONFIG_DM_SPI
enable CONFIG_DM_SPI and CONFIG_DM_SPI_FLASH
and get rid of build removal warnings.

define CONFIG_GPIO_ENABLE_SPI_FLASH is not longer
needed, so remove it from config_whitelist.txt

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:55 +01:00
Heiko Schocher
64679e2c80 imx6: aristainetos: convert to DM_USB
Drop CONFIG_USB_MAX_CONTROLLER_COUNT and enable DM_USB
in defconfig.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:55 +01:00
Heiko Schocher
fc7e3cc639 imx6: aristainetos: convert gpio pins to DM and DTS
Enable DM_GPIO, GPIO_HOG, LED and LED_GPIO as gpio
and LEDs are now defined in DTS. Enable also here
the pinctrl driver, so pinmux setup is also done.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:55 +01:00
Heiko Schocher
8664c485d9 imx6: aristainetos: convert to DM_MMC
Enable DM_MMC support.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:55 +01:00
Heiko Schocher
f44b4ab3c8 imx6: aristainetos: add DM_SERIAL support
add DM_SERIAL support for the aristainetos board, and
remove not used code from board code.

remove CONSOLE_OVERWRITE_ROUTINE.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:55 +01:00
Heiko Schocher
ccc7595a81 imx6: aristainetos: prepare dts for other board versions
as we switch to support DM and DTS, rework the existing
DTS trees. Change also Linux specific Device trees, goal
is to push this changes to linux.

Collect U-Boot specific changes in separate "*u-boot*" dts
files.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:55 +01:00
Heiko Schocher
0f1130b6a1 imx6: aristainetos: remove aristainetos-v2.c
remove aristainetos-v2.c file, as we now want to
switch to DM/DTS support and have all board specific
code in one file. Goal is to setup differences
through DT.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:55 +01:00
Heiko Schocher
a053c8baad imx6: aristainetos: add thumb build
add thumb build to aristainetos build to save
binary space.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:55 +01:00
Heiko Schocher
8fb028ee20 imx6: aristainetos: add device tree from linux
Add device trees from Linux in preparation for driver model
conversions.

device tree files taken from Linux:
71ae5fc87c34: "Merge tag 'linux-kselftest-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest"

and added SPDX license identifier.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:55 +01:00
Heiko Schocher
593eb229db imx6: aristainetos: disable gigabit support
gigabit support does not work on the aristainetos
board, so disable it.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:55 +01:00
Heiko Schocher
1b857f1a92 imx6: aristainetos: remove 2b version
remove 2b version of aristainetos board, as it
is easier to make the DM / DTS port and introduce
the 2b board version again (also some more board
version).

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:55 +01:00
Heiko Schocher
3882e6fc01 imx6: aristainetos: move defines to Kconfig
move defines, which are already moved to Kconfig
out of board config.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:55 +01:00
Heiko Schocher
79db1b4665 video: lg4573: convert to DM
convert this driver to support DM.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:55 +01:00
Heiko Schocher
a7e2dc9cf6 imx6: remove aristainetos board
remove not anymore used aristainetos board.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-01-07 10:26:55 +01:00
Tom Rini
0b0c6af387 Prepare v2020.01
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-06 15:56:31 -05:00
Tom Rini
797eee36a1 Revert "mmc: davinci: drop struct davinci_mmc_plat"
Adam Ford reports that this change breaks booting on da850-evm and
Bartosz Golaszewski agrees that with the impending release we should
revert the change for now.  With that noted:

This reverts commit 21a4d80a71.

Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Tested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-04 09:33:33 -05:00
Tom Rini
70bd39d72a Merge branch '2020-01-03-master-imports'
- Fixes for host tools with musl C library
- Two fixes for TI K3 platforms
2020-01-03 09:47:22 -05:00
Lokesh Vutla
40109f4d7e arm: mach-k3: Enable WA for R5F deadlock
On K3 devices there are 2 conditions where R5F can deadlock:
1.When software is performing series of store operations to
  cacheable write back/write allocate memory region and later
  on software execute barrier operation (DSB or DMB). R5F may
  hang at the barrier instruction.
2.When software is performing a mix of load and store operations
  within a tight loop and store operations are all writing to
  cacheable write back/write allocates memory regions, R5F may
  hang at one of the load instruction.

To avoid the above two conditions disable linefill optimization
inside Cortex R5F which will make R5F to only issue up to 2 cache
line fills at any point of time.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-03 09:47:11 -05:00
Lokesh Vutla
196d3e4017 arm: dts: k3-j721e: ddr: Update to 0.2 version of DDR config tool
Update the ddr settings to use the DDR reg config tool rev 0.2.0.
This reduces the aging count(in DDRSS_CTL_274_DATA reg) to 15 in-order
to avoid DSS underflow errors.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Kevin Scholz <k-scholz@ti.com>
2020-01-03 09:47:10 -05:00
Sergei Trofimovich
c6ad93612a include/u-boot/crc.h: pull 'uint' definition on musl targets
The build failure was originally reported on arm64-musl
target at https://bugs.gentoo.org/703132. Here is the amd64-musl
variant:

```
$ LANG=C make CROSS_COMPILE=x86_64-gentoo-linux-musl- tools-only_defconfig -j$(nproc)
$ LANG=C make CROSS_COMPILE=x86_64-gentoo-linux-musl- tools-all            -j$(nproc)
...
include/u-boot/crc.h:37:44: error: unknown type name 'uint'; did you mean 'int'?
   37 | void crc16_ccitt_wd_buf(const uint8_t *in, uint len,
      |                                            ^~~~
      |                                            int
```

Note: 'uint' is not defined there.

On glibc 'uint' comes from <sys/types.h> and happens to work on most .c files.

The change imports 'uint' declaration from '<compiler.h>'.

Bug: https://bugs.gentoo.org/703132
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
2020-01-03 09:47:10 -05:00
Sergei Trofimovich
d11fa9c16b include: fix 'ulong' definition on musl targets
The build failure was originally reported on arm64-musl
target at https://bugs.gentoo.org/703132. Here is the amd64-musl
variant:

```
$ LANG=C make CROSS_COMPILE=x86_64-gentoo-linux-musl- tools-only_defconfig -j$(nproc)
$ LANG=C make CROSS_COMPILE=x86_64-gentoo-linux-musl- tools-all            -j$(nproc)
...
In file included from tools/env/../../env/flags.c:7,
                 from tools/env/env_flags.c:1:
include/env.h:159:1: error: unknown type name 'ulong'; did you mean 'long'?
  159 | ulong env_get_ulong(const char *name, int base, ulong default_val);
      | ^~~~~
      | long
```

Note: 'ulong' is not defined there.

On glibc 'ulong' comes from <sys/types.h>:

```c
/* Old compatibility names for C types.  */
typedef unsigned long int ulong;
```

On musl it comes from <sys/types.h> as well but from under different guards:

```c
typedef unsigned long u_long, ulong;
```

The change inlines 'ulong' define similar to 'uint' define.

Bug: https://bugs.gentoo.org/703132
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
2020-01-03 09:47:10 -05:00
Tom Rini
4b75aa5aa7 - fix missing graphics output on some x86 boards
- avoid using #ifdef in video code
 - add .gitignore for video font *.S files
 -----BEGIN PGP SIGNATURE-----
 
 iGwEABECACwWIQSC4hxrSoIUVfFO0kRM6ATMmsalXAUCXg5F7g4cYWd1c3RAZGVu
 eC5kZQAKCRBM6ATMmsalXKzNAJ93lUmXiaSDCJDTJ99G6RcpbDY98QCeKdAsgKEq
 +edrqBimoikBmbw0NYE=
 =+x5b
 -----END PGP SIGNATURE-----

Merge tag 'fixes-v2020.01' of https://gitlab.denx.de/u-boot/custodians/u-boot-video

- fix missing graphics output on some x86 boards
- avoid using #ifdef in video code
- add .gitignore for video font *.S files
2020-01-02 18:12:05 -05:00