Alex Marginean 8bd37ce3cd drivers: net: add marvell MDIO driver ... This patch adds a separate driver for the MDIO interface of the Marvell Ethernet controllers based on driver model. There are two reasons to have a separate driver rather than including it inside the MAC driver itself: *) The MDIO interface is shared by all Ethernet ports, so a driver must guarantee non-concurrent accesses to this MDIO interface. The most logical way is to have a separate driver that handles this single MDIO interface, used by all Ethernet ports. *) The MDIO interface is the same between the existing mv643xx_eth driver and the new mvneta/mvpp2 driver. Even though it is for now only used by the mvneta/mvpp2 driver, it will in the future be used by the mv643xx_eth driver as well. This driver supports SMI IEEE for 802.3 Clause 22 and XSMI for IEEE 802.3 Clause 45. This patch also adds device tree binding for marvell MDIO driver. Signed-off-by: Ken Ma <make@marvell.com> Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>		2019-09-04 11:37:19 -05:00
..
adc	adc: stm32: Fix warnings when compiling with W=1	2019-07-12 11:50:55 +02:00
ata	dm: scsi: Scan the actual number of ports	2019-08-26 11:46:20 -04:00
axi	drivers: cosmetic: Convert SPDX license tags to Linux Kernel style	2018-10-28 09:26:39 -04:00
bios_emulator	bios_emulator: remove stray break	2019-08-09 22:24:02 +08:00
block	Revert "blk: Invalidate block cache when switching hwpart"	2019-08-30 14:17:11 -04:00
board	board: gazerbeam: Fix SC detection	2019-05-21 08:03:38 +02:00
bootcount	env: Drop environment.h header file where not needed	2019-08-11 16:43:41 -04:00
cache	dm: cache: add v5l2 cache controller driver	2019-09-03 09:31:03 +08:00
clk	- add missing g12b clock driver compatible, fixing odroid-n2 usb support	2019-08-29 07:25:48 -04:00
core	Kconfig: Varios: Fix more SPL, TPL dependencies	2019-08-26 11:46:29 -04:00
cpu	riscv: cpu: Skip unavailable hart in the get_count() op	2019-09-03 09:29:43 +08:00
crypto	Revert "drivers/crypto/fsl: assign job-rings to non-TrustZone"	2019-06-11 10:42:48 +02:00
ddr	ddr, fsl: add DM_I2C support	2019-08-26 21:16:24 +05:30
demo	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
dfu	env: Move env_get() to env.h	2019-08-11 16:43:41 -04:00
dma	CONFIG_SPL_SYS_[DI]CACHE_OFF: add	2019-05-18 08:15:35 -04:00
fastboot	env: Move env_get() to env.h	2019-08-11 16:43:41 -04:00
firmware	firmware: ti_sci: Parse all resource ranges even if some is not available	2019-08-12 13:33:43 -04:00
fpga	fpga: altera: cyclon2: Check function pointer before calling	2019-07-30 10:21:15 +02:00
gpio	kconfig: Convert CONFIG_MXS_GPIO to Kconfig	2019-08-23 13:59:06 -04:00
hwspinlock	hwspinlock: add stm32 hardware spinlock support	2018-12-06 23:26:33 -05:00
i2c	i2c: mxc: add CONFIG_CLK support	2019-09-02 06:35:08 +02:00
input	env: Move env_get() to env.h	2019-08-11 16:43:41 -04:00
led	led: bcm6858: allow to use this driver on ARCH_963158	2019-04-23 17:57:22 -04:00
mailbox	mailbox: introduce stm32-ipcc driver	2019-07-12 11:18:53 +02:00
memory	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
misc	Merge branch 'u-boot-stm32_20190827' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm	2019-08-27 13:19:47 -04:00
mmc	mmc: invalidate block cache after hwpart switched successfully	2019-08-30 14:17:11 -04:00
mtd	mtd: nand: raw: Move CONFIG_SYS_NAND_USE_FLASH_BBT to Kconfig	2019-08-25 20:58:37 -04:00
net	drivers: net: add marvell MDIO driver	2019-09-04 11:37:19 -05:00
nvme	nvme: Fix PRP Offset Invalid	2019-08-26 11:46:28 -04:00
pch	pch: Add ioctl support	2019-02-20 15:27:08 +08:00
pci	dm: pcie_fsl: Add MPC8548 PCIe support	2019-08-28 13:47:47 +05:30
pci_endpoint	pci_ep: Fix Coverity warning	2019-08-07 15:31:04 -04:00
phy	Kconfig: Varios: Fix more SPL, TPL dependencies	2019-08-26 11:46:29 -04:00
pinctrl	pinctrl: stmfx: update pinconf settings	2019-08-27 09:36:56 +02:00
power	stpmic1: simplify stpmic1_sysreset_request	2019-08-27 11:19:23 +02:00
pwm	pwm: imx: add DM_PWM support	2019-07-19 20:14:50 +02:00
qe	env: Drop environment.h header file where not needed	2019-08-11 16:43:41 -04:00
ram	stm32mp1: ram: add pattern parameter in infinite write test	2019-08-27 11:19:23 +02:00
remoteproc	stm32mp1: Add remoteproc support for m4 coprocessor	2019-08-27 11:19:23 +02:00
reset	env: Move env_get() to env.h	2019-08-11 16:43:41 -04:00
rtc	rtc: stm32: manage 2 digit limitation on year	2019-08-27 09:36:56 +02:00
scsi	env: Move env_set_ulong() to env.h	2019-08-11 16:43:41 -04:00
serial	serial: stm32: add Framing error support	2019-08-27 11:19:23 +02:00
smem	drivers: smem: sandbox	2018-07-19 16:31:38 -04:00
soc	soc: keystone: Merge into ti specific directory	2019-04-11 20:07:12 -04:00
sound	sound: tegra: Add a sound driver	2019-05-24 10:14:10 -07:00
spi	x86: ich-spi: Convert driver to spi-mem ops	2019-08-09 22:24:02 +08:00
spmi	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
sysreset	sysreset: move stm32mp sysreset poweroff implementation to sysreset uclass	2019-08-19 12:43:26 +08:00
tee	env: Drop the ACTION typedef	2019-08-11 16:43:41 -04:00
thermal	thermal: add i.MX8 thermal driver	2019-07-19 15:17:05 +02:00
timer	dm: timer: Skip device that does not have a valid ofnode in pre_probe()	2019-07-24 12:54:08 -07:00
tpm	tpm: wait for valid status	2019-07-11 14:11:18 -04:00
usb	usb: r8a66597: Add optional DM VBUS regulator support	2019-08-22 18:23:36 +02:00
video	env: Move env_get() to env.h	2019-08-11 16:43:41 -04:00
virtio	virtio: Add a Sandbox transport driver	2018-11-14 09:16:28 -08:00
w1	w1: Add driver for i.MX bus master controller	2019-01-01 14:12:18 +01:00
w1-eeprom	w1-eeprom: Add support for Maxim DS2502 add only memory	2018-11-16 16:51:55 -05:00
watchdog	watchdog: omap_wdt: Disable DM watchdog support in SPL	2019-08-12 13:27:55 -04:00
Kconfig	Drop PCMCIA	2019-08-11 19:27:41 -04:00
Makefile	Drop PCMCIA	2019-08-11 19:27:41 -04:00