Commit Graph

15650 Commits

Author SHA1 Message Date
Ang, Chee Hong
fd50eac910 ARMv8: Disable fwcall when PSCI is enabled
When PSCI is enabled, we are expecting U-Boot which now act
as EL3 software will handle all the PSCI calls. We won't need
fwcall as no further HVC or SMC are needed.

Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
2019-04-22 18:13:21 -04:00
Chee Hong Ang
f6b0115a96 ARMv8: Allow SiP service extensions on top of PSCI code
Allow PSCI layer to handle any SiP service functions added by
platform vendors. PSCI layer will look for SiP service function
in the SiP function table located in '._secure_svc_tbl_entries'
section if the SMC function identifier is not found in the PSCI
standard functions table. Use DECLARE_SECURE_SVC macro to declare
and add platform specific SiP service function.
This new section '._secure_svc_tbl_entries' is located next to
'._secure.text' section. Refer to arch/arm/cpu/armv8/u-boot.lds.

Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
2019-04-22 18:13:21 -04:00
Philippe Reynes
b2aa518a62 dt: bcm963158: enable nand controller
Enable the nand controller in the device tree
of the board bcm963158.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22 12:06:39 -04:00
Philippe Reynes
6242e9a82a dt: bcm63158: add nand controller
Add the nand controller in the bcm63158 device tree.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22 12:06:38 -04:00
Philippe Reynes
2463ad34b0 dt: bcm968580xref: enable nand controller
Enable the nand controller in the device tree
of the board bcm968580xref.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22 12:06:38 -04:00
Philippe Reynes
24e27a180a dt: bcm6858: add nand controller
Add the nand controller in the bcm6858 device tree.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22 12:06:30 -04:00
Philippe Reynes
92cd0047a9 dt: bcm968380gerg: enable nand controller
Enable the nand controller in the device tree
of the board bcm96838gerg.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22 11:56:29 -04:00
Philippe Reynes
d8d9bfb90b dt: bcm6838: add nand controller
Add the nand controller in the bcm6838 device tree.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22 11:55:58 -04:00
Philippe Reynes
6478848d16 arm: asm: io.h: define readX_relaxed and writeX_relaxed
This patch port the function readX_relaxed and
writeX_relaxed from kernel 4.18.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22 11:55:58 -04:00
Tom Rini
8a94262435 Second set of u-boot-atmel features and fixes for 2019.07 cycle
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJcvW07AAoJEB6zHgIOrC/Iu4QH/1REDOTrsZPydd2yD/O81vPs
 RiLC8wP2J4UmqtMcNTLyvxlYwrzqoR5J6SYdyBNU/+cLEp/gdzEI+rjsfSV2uRX1
 Qb4Pk2FiI503JVjegxsbJqzASfiEP7rIg3HM5431xbhYH22MW2FH6le6yrtNxjBh
 m1WFjQYX1bpbGb6zue8TgyLIeN1IqWuqnH9kUHixUEan+xrpEhN239LDFjdvGbvC
 BvYyMtDddmMt4YDzNjgX36us993kylGZp6JijR3zgUao7I/JGVZAJrxw8MHDTnVy
 UKv3VI9F5bGLSvzqTVL2MFU6XtJW26v+niGLhGzlUhb3TTKrdKOicm3VF7tO+JU=
 =MamK
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-atmel-2019.07-b' of git://git.denx.de/u-boot-atmel

Second set of u-boot-atmel features and fixes for 2019.07 cycle
2019-04-22 10:28:21 -04:00
Tom Rini
6c5f8dd540 Merge branch 'master' of git://git.denx.de/u-boot-usb
- Various fastboot, dwc2/stm32 updates
2019-04-21 19:00:04 -04:00
Tom Rini
b4fde1633e Merge branch 'master' of git://git.denx.de/u-boot-socfpga
- Various stratix10, gen5 updates
2019-04-21 18:59:30 -04:00
Patrick Delaunay
6fe7dd3327 stm32mp1: add stusb1600 support for DK1 and DK2 board
The DK1 and DK2 boards use the USB Type-C controller STUSB1600.
This patch updates:
- the device tree to add the I2C node in the DT
- the board stm32mp1 to probe this I2C device and use this controller
  to check cable detection.
- the DWC2 driver to support a new dt property
  "u-boot,force-b-session-valid" which forces B session and
  device mode; it is a workaround because the VBUS sensing and
  ID detection isn't available with stusb1600.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-21 10:26:52 +02:00
Patrick Delaunay
c31000c534 stm32mp1: migrate USBOTG device to driver model
Use the DWC2 device driver with DM_USB_GADGET support and
cleanup the USB support in STM32MP1 board.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-21 10:26:52 +02:00
Patrick Delaunay
c50151d43f phy: usbphyc: Binding update of vdda supply
Move supply vdda1v1 and vdda1v8 in usbphyc node and
no more in port

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-21 10:26:51 +02:00
Tom Rini
1f4ae66eaa Merge tag 'arc-for-2019.07' of git://git.denx.de/u-boot-arc
In this small series we migrate ARC boards to DM_MMC
so we're hopefully are good now and our boards will be kept
in U-Boot for some more time :)
2019-04-18 12:12:16 -04:00
Razvan Stefanescu
fe5963d63e ARM: dts: at91-sama5d2-icp: Add MACB node
MACB has a fixed link connection to KSZ8563 switch port.

Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
2019-04-18 09:43:22 +03:00
Eugen Hristev
f085452d85 board: atmel: add SAMA5D2 ICP board
The SAMA5D2 ICP Board features the SAMA5D27 SoC,
together with QSPI Flash, Wilc3000 wireless device and
EtherCat support.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-04-18 09:43:22 +03:00
Eugeniy Paltsev
cc2f7b6c7d ARC: [plat-axs10x]: migrate to DM_MMC
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-04-18 09:12:38 +03:00
Eugeniy Paltsev
54858311df ARC: [plat-hsdk]: migrate to DM_MMC
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-04-18 09:12:38 +03:00
Ley Foon Tan
2c494e62c3 arm: dts: Stratix10: Add QSPI node
Merge qspi dts node from Linux.
Commit 0cb140d07fc75fb (arm64: dts: stratix10: Add QSPI support for Stratix10)

Add -u-boot.dtsi files for non Linux dts properties and
update properties for Uboot.
- add u-boot,dm-pre-reloc
- add alias for spi0
- change compatible for flash
- support quad read and quad write
- change maximum frequency to 100MHz

Tested on Stratix 10 SoC devkit.
SOCFPGA_STRATIX10 # sf probe 0:0
SF: Detected mt25qu02g with page size 256 Bytes, erase size 64 KiB, total 256 MiB

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-04-17 22:20:17 +02:00
Ley Foon Tan
456d45261b ddr: altera: Stratix10: Add ECC memory scrubbing
Scrub memory content if ECC is enabled and it is not
from warm reset boot.

Enable icache and dcache before scrub memory
and use "DC ZVA" instruction to clear memory
to zeros. This instruction writes a cache line
at a time and it can prevent false ECC error
trigger if write cache line partially.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-04-17 22:20:17 +02:00
Ley Foon Tan
8ab9daabe5 arm: socfpga: stratix10: Add cpu_has_been_warmreset()
Add helper function cpu_has_been_warmreset() to check
if CPU is from warm reset boot.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-04-17 22:20:17 +02:00
Ley Foon Tan
62e6278d1e arm: dts: Stratix10: Modify stratix10 socdk memory node
The stratix10 socdk ships with 4GB of memory.  Modify the
device tree to represent this.  Note that to access 4GB of
memory in Stratix 10, due to the IO space from 2GB to 4GB,
we use the fact that the DDR controller ignores upper address
bits outside of the configured DRAM's size.  This means that
, the 4GB DRAM is mapped to memory every 4GB.

For an 8GB memory, you can either live with the 2GB IO space,
and loose access to that memory from the processor, or use
the same trick:

Loose 2GB of memory:
        memory {
                device_type = "memory";
                /* 8GB */
		/* first 2GB */
                reg = <0 0x00000000 0 0x80000000>,
		/* last 4GB */
                      <1 0x00000000 1 0x00000000>;
                u-boot,dm-pre-reloc;
        };

or to map it all:
        memory {
                device_type = "memory";
                /* 8GB */
		/* first 2GB */
                reg = <0 0x00000000 0 0x80000000>,
		/* next 6GB */
                      <2 0x80000000 1 0x80000000>;
                u-boot,dm-pre-reloc;
        };

Signed-off-by: Dalon Westergreen <dalon.westergreen@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-04-17 22:20:17 +02:00
Ley Foon Tan
b6f7ee5d1f ddr: altera: stratix10: Move SDRAM size check to SDRAM driver
Move SDRAM size check to SDRAM driver. sdram_calculate_size()
is called in SDRAM initialization already, avoid calling
twice in size check function.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-04-17 22:20:17 +02:00
Simon Goldschmidt
c5de2b7eae arm: socfpga: implement proper peripheral reset
This commit removes ad-hoc reset handling for peripheral resets from SPL
for socfpga gen5.

This is done because as U-Boot drivers support reset handling by now.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-04-17 22:20:17 +02:00
Simon Goldschmidt
29873c74f3 arm: socfpga: move gen5 SDR driver to DM
To clean up reset handling for socfpga gen5, port the DDR driver to DM
using UCLASS_RAM and implement proper reset handling.

This gets us rid of one ad-hoc call to socfpga_per_reset().

The gen5 driver is implemented in 2 distinct files. One of it (containing
the calibration training) is not touched much and is kept at using
hard coded addresses since the code grows even more otherwise.

SPL is changed from calling hard into the DDR driver code to just
probing UCLASS_RESET and UCLASS_RAM. It is happy after finding a RAM
driver after that.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-04-17 22:20:16 +02:00
Simon Goldschmidt
7357c2cbc0 arm: socfpga: gen5: add reset & sdr node to SPL devicetrees
The SPL for socfpga gen5 currently takes all peripherals out of reset
unconditionally. To implement proper reset handling for peripherals,
the reset node has to be provided with the SPL dts.

In preparation to move the DDR driver to DM, the sdr node is required
in SPL, too.

This patch adds "u-boot,dm-pre-reloc" to U-Boot specific dtsi addon
files so that the reset manager and SDR driver correctly probe in SPL.
It centralizes these settings into a common file since in contrast to
boot-type specific nodes, "soc", "rst" and "sdr" are always needed.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-04-17 22:20:16 +02:00
Simon Goldschmidt
42a37d9774 arm: socfpga: gen5: sync devicetrees to Linux
This is again a sync to linux-next + pending patches in Dinh's tree at
commit 1c909b2dfe6a ("ARM: dts: socfpga: update more missing reset
properties")'

It adds missing peripheral reset properties to socfpga.dtsi and removes
U-Boot specific leftovers from socfpga_cyclone5_socrates.dts.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-04-17 22:20:15 +02:00
Uri Mashiach
ecb76eff56 arm: am57xx: cl-som-am57x: remove board support
U-Boot support for the CL-SOM-AM57x module is no longer required.

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
2019-04-17 09:20:26 -04:00
Tom Rini
4b37f36d68 Merge branch 'master' of git://git.denx.de/u-boot-sunxi
- Convert DM_MMC and DM_SCSI
- A20, R40, H6 Linux dts(i) sync
- CLK, RESET support for sunxi, sun8_emac net drivers
2019-04-17 09:19:45 -04:00
Tom Rini
14b8c420b8 Xilinx/FPGA changes for v2019.07
fpga:
 - Add support for external data in FIT
 - Extend testing for external data case
 - Inform user about a need to run post config on Zynq
 
 arm:
 - Tune zynq command functions
 - Fix internal variable setting
 
 arm64:
 - Add support for zc39dr decoding
 - Disable WDT for zcu100
 - Small changes in reset_reason()
 - Some DT changes (spi)
 - Tune qspi-mini configuration
 - Remove useless eeprom setting
 - Fix two sdhci boot case
 
 spi:
 - Fix tap delay programming
 
 clk:
 - Enable i2c in SPL
 
 net:
 - Fix gem phydev handling
 - Remove phy detection code from gem driver
 
 general:
 - Correct EXT_DTB usage for MULTI_DTB_FIT configuration
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAly262oACgkQykllyylKDCH44gCbBnuxUH6ZF0B7Leuee4te7C59
 LmUAn14/bbtMt17zkMSADCjY9yGWF4au
 =mWrW
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2019.07' of git://git.denx.de/u-boot-microblaze

Xilinx/FPGA changes for v2019.07

fpga:
- Add support for external data in FIT
- Extend testing for external data case
- Inform user about a need to run post config on Zynq

arm:
- Tune zynq command functions
- Fix internal variable setting

arm64:
- Add support for zc39dr decoding
- Disable WDT for zcu100
- Small changes in reset_reason()
- Some DT changes (spi)
- Tune qspi-mini configuration
- Remove useless eeprom setting
- Fix two sdhci boot case

spi:
- Fix tap delay programming

clk:
- Enable i2c in SPL

net:
- Fix gem phydev handling
- Remove phy detection code from gem driver

general:
- Correct EXT_DTB usage for MULTI_DTB_FIT configuration
2019-04-17 09:19:13 -04:00
Tom Rini
88d5ab3d67 UniPhier SoC updates for v2019.07
- Sync DT with Linux 5.1-rc4
 
 - Enable CONFIG_SUPPORT_EMMC_RPMB for uniphier_v8_defconfig
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJctlk9AAoJED2LAQed4NsGsBoP/0wXmetq2UKCn+4qWy3+2ItR
 M8hspsdpIclFTcG7D8kxeCWgMv0SH6hFbRgEo8gfnHX/kWCXnklgVc7q2rEWIk53
 0Dze8Zopr0YULhx8Esuq1viS/WVz1qPVK0cnqJc4QgBbXxLWxc9xC1WUV61G0ls2
 3oHGLbEJTtTE2cbEIJaRIu1pfravN4RoJtsiO+Gum1LEtoyQ/h7g/5f/equwJ0q3
 QwbvASuXOyoyhypcjA97PAQZru54e8cqFd1VwRJNJMryjkOOk7Tq+z77WwtFiv7G
 heDy0P0b/ykxoasUMwPOOkC7/uVjeh6lsoOqiJejQan7bcYEWPsWRPflZeFVFTIS
 ptfir+LCNaBdUddVP7IcNaRRrho11zyvhOcHLb+df7dI7UNytux9YA0CIOlgFNmZ
 /lIxKlCfXKEft20XHTxIfSoPPrlmmKzk1zyvv8+rZLsMW0yBIQkLUoXKcZL+dmSG
 3U8DrCNZlc4xHVEh69dntqHZ2+5TtpKV3KEBnEOHAwlqSdP6K0sU0no1hZ4H0gkU
 xylEihbMxwGljIAQt3VBiGb+UDlvZKvADyZDKnRt1OSO65Z3z1Vt2W4ziSrcWCTC
 bloy6jiOxaRkbXeEQSmjKfmOr3DpagyUuESjTKLFhYeFLl9dqMURh4C0FtP3M50d
 R6ivoyBE6BLnK8gOz9JL
 =YEOC
 -----END PGP SIGNATURE-----

Merge tag 'uniphier-v2019.07' of git://git.denx.de/u-boot-uniphier

UniPhier SoC updates for v2019.07

- Sync DT with Linux 5.1-rc4

- Enable CONFIG_SUPPORT_EMMC_RPMB for uniphier_v8_defconfig
2019-04-17 09:16:38 -04:00
Jagan Teki
bb3362b0ca arm: sunxi: Enable DM_MMC and DM_SCSI
- Enable DM_MMC if MMC defined
- Enable DM_SCSI if SCSI defined

globally through Allwinner platform, the effected SoC families
and boards will make use of MMC and SCSI subsystems in driver-model.

Tested DM_MMC in one board from A64, H6, H5, H3, R40, A83T, A20, A10
SoCs.

Tested-by: Pablo Sebastián Greco <pgreco@centosproject.org> # BPI-M2-Ultra
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17 14:34:45 +05:30
Jagan Teki
6c90036f7b ARM: dts: sun8i-r40-bananapi-m2-berry: Enable AHCI
Enable ahci node for BPI-M2-Berry, this would require since
we have DM_SCSI enabled on the respective SoC.

Unable to sync the same node from Linux, since the similar change
is still in Linux ML.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17 14:34:45 +05:30
Jagan Teki
36b53ab24e ARM: dts: a20-wits-pro-a20-dkt: Enable AHCI
Enable ahci node for a20-wits-pro-a20-dkt, this would require since
we have DM_SCSI enabled on the respective SoC.

Right now, ahci enabled in -u-boot.dtsi and will remove once same
supported by Linux.

Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17 14:34:45 +05:30
Jagan Teki
328c5f09c9 ARM: dts: a20-m5: Enable AHCI
Enable ahci node for sun7i-a20-m5.dts, this would require since
we have DM_SCSI enabled on the respective SoC.

No need to send patch to Linux for this change, since this
dts is U-Boot specific.

Cc: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17 14:34:45 +05:30
Jagan Teki
0cc47a8ead arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
Sync sun7i-a20 dts(i) files from Linux 5.1-rc2

Linux commit details about the sun7i-a20* sync:
"ARM: dts: sun7i: bananapi: Add GPIO banks regulators"
(sha1: 09c6572290f018d73ec2e812e28bada34d41815f)

Here are U-Boot specific dts changes.

- s/uart0_pins_a/uart0_pb_pins for
  sun7i-a20-ainol-aw1.dts
  sun7i-a20-m5.dts
  sun7i-a20-primo73.dts
  sun7i-a20-yones-toptech-bd1078.dts
  sunxi-itead-core-common.dtsi
- s/gmac_pins_mii_a/gmac_rgmii_pins for
  sun7i-a20-m5.dts
- drop i2c0, i2c1 pins from
  sunxi-itead-core-common.dtsi
- drop mmc0 pins from
  sun7i-a20-primo73.dts

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17 14:34:45 +05:30
Jagan Teki
3705d4965f arm: allwinner: r40: Sync R40 dts(i) files from Linux 5.1-rc2
Sync sun8i-r40 dts(i) files from Linux 5.1-rc2

Linux commit details about the sun8i-r40* sync:
"ARM: dts: sun8i: r40: bananapi-m2-ultra: Add Bluetooth device node"
(sha1: 1e5f1db4ccd8348a21da55bff82f4263000879ef)

Linux commit details about the sun8i-v40* sync:
"ARM: dts: sunxi: Fix I2C bus warnings"
(sha1: 0729b4af5753b65aa031f58c435da53dbbf56d19)

Cc: Pablo Sebastián Greco <pgreco@centosproject.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17 14:34:45 +05:30
Masahiro Yamada
cd33feda6b ARM: dts: uniphier: sync with Linux 5.1-rc4
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-04-17 07:22:23 +09:00
Luca Ceresoli
350cfe79a8 arm64: zynqmp: fix preprocessor check for SPL_ZYNQMP_TWO_SDHCI
A missing CONFIG_ prefix while checking for this Kconfig variable makes the
check always fail. Fix it. While there also switch from the '#if defined'
form to the '#ifdef' form as the other checks in this function.

Fixes: 35e2b92344 ("arm64: zynqmp: Fix logic around CONFIG_ZYNQ_SDHCI")

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16 11:52:02 +02:00
Siva Durga Prasad Paladugu
3b4146f133 arm64: zynqmp: Define label for flash node
Define a label for flash node so that it can be
referenced easily as required.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16 11:51:34 +02:00
Siva Durga Prasad Paladugu
8bc8991f22 arm64: zynqmp: Add spi-flash compatible string to flash node
spi-flash compatible string is needed for reading tx and rx bus
widths, hence add this compatible string to flash node.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16 11:51:34 +02:00
Michal Simek
ba4f52bd42 arm64: zynqmp: Add debug message about clearing BSS
Just have better view on system.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16 11:51:34 +02:00
Heiko Schocher
ac578e08b1 at91sam9260.dtsi: add some labels
add labels to rtc, pinctrl and watchdog node.

This makes it possible to reference the nodes
from board dts files.

Signed-off-by: Heiko Schocher <hs@denx.de>
2019-04-15 17:18:59 +03:00
Tom Rini
75ce8c938d Move to DM
-----------
 
 - DM support in sata
 - Toradex Board to DM
 - wandboard to DM
 - tbs2910 to DM
 - GE boards to DM
 - VHybrid boards to DM
 - DM_VIDEO for i.MX
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAly0NhIPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3XiUMALq2W4HPjFlDaVHpaxKIvZMkqAAjF7eE6M9l
 DWivSm/Anm5jeE2UM80FpV7npdkPMcOl2YdcIjg+jMKKP6DI+4N6gEhWvxX9mEoC
 RmR2nxGC/GIc0Blb4HU9V6xMkeR5jSAQ6bxZmX3IrnG6u67BIi4NmkNrT9gdQ+WT
 PkJf2Ai7DN7+epfOzjO0d/LjS3hAVb+nesHuxoVraElwc5sEMAnoD0vIMUrXceZ2
 +V6WiU1i9jeLj3fA8P+4o6wqQpxFLlJiuC0FUNKQH/kWIqX6MGrr9ElseLUV0O+Z
 LL5nqsuTgG/fAol1r71De49fiML2Pfx7ZkAZOJ1NMUOXUKw25ulO/wi0wg8t+l2Z
 2oAQ3S84RUVYX4MFLwxkBCq3uC9hvyCfWF1GmVLV6xSEulS6PnHx0FL6OTY4uB3h
 bmVs/mutwwqYBaaoqGG4sG5L7TVSG/JxNgTVNh3Aqj5a89Fd9us+nBhLhoq6xyVl
 cEf+/gPGQ97JEj9DolAPFIFQJBvL7g==
 =KLsH
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20190415' of git://git.denx.de/u-boot-imx

Move to DM
-----------

- DM support in sata
- Toradex Board to DM
- wandboard to DM
- tbs2910 to DM
- GE boards to DM
- VHybrid boards to DM
- DM_VIDEO for i.MX
2019-04-15 07:31:14 -04:00
Tom Rini
38f94d3539 Pull request for UEFI sub-system for v2019.07-rc1 (2)
In the aarch64 crash dump information about the loaded EFI images is added.
 
 In README.uefi the development target is for the UEFI subsystem is
 described as "Embedded Base Boot Requirements (EBBR) Specification"
 compliance.
 
 Several bug fixes are supplied.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAlyyzHEACgkQxIHbvCwF
 GsS+9Q/9HahVvxHFljI8ymxznml7AlFCrxWwcVo5HhftbGuQIgF3NMXRlsxmsSPM
 Z+Cc3EFni4EWWWe9yDMLqXV4NCd6bnfWYWP4UvbqAKCfeX8jScRyMypPnxZ3rNrg
 oe/8zDT9qXQnEah4sB+AQhar2VRTS1p97wKDObt3mj9c2g5pGL1zdejS/4SfnCd0
 a1BymV7p7fpykDjW8S0GQM56QAkbB9CJ4Q7nlPCDlspqJlQB318lWs46FfUn2Aue
 DNLm0uscrMZtEr/aAdT+r/96GIq4AVkexy7b5MZ0v/NDNAtmIqO1ORUmLSNSDfcM
 /cbtxq53VbeztMzMoYDdU0zNR//N4dL3GbSRKJulksvxeIExCp3dRV7gfTOwWq7J
 Lg/b43WJI1f2vgXDgEPddTO3E3SPjCGQcnCNOcVNNfTkyrtVaCmRYh69lV2BpKKF
 oQCYQyzS8yYLxj16YXixK9seyQYxh/vPYVT78ed5A8B1dmyxSQMnEJjY93jngj1g
 k5DRH9nnx12aeEqkhsWvVdHT0OBNj/+oZlzT3KGDcxhrDeZXAgqxAO1oPG85Wqnx
 kPeadyVD0T5Dd8fpMqF+tToB+GCbvyUVJsVlNqDSC7NslJ3AbxBKNDuEsMJlXgwL
 Yh4/lusg/YXzZ4ACWHgUnckZDVZGNj+58QRgEU+3mZinMjDS38E=
 =QdJl
 -----END PGP SIGNATURE-----

Merge tag 'efi-2019-07-rc1-2' of git://git.denx.de/u-boot-efi

Pull request for UEFI sub-system for v2019.07-rc1 (2)

In the aarch64 crash dump information about the loaded EFI images is added.

In README.uefi the development target is for the UEFI subsystem is
described as "Embedded Base Boot Requirements (EBBR) Specification"
compliance.

Several bug fixes are supplied.
2019-04-15 07:30:25 -04:00
Jagan Teki
a93a55044b arm64: allwinner: sun50i: Sync H6 dts(i) files from Linux
Usually the Linux dts changes were synced in specific tags in Allwinner,
to keep track for whats been synced so-far and plan for future syncs.

But this patch sync sun50i-h6* dts(i) files from Linux w/o any specific
tag since these dts(i) changes are required for new H6 boards support.

Linux commit details about the sun50i-h6* sync:
"arm64: dts: allwinner: h6: move MMC pinctrl to dtsi"
(sha1: 6ba2e45d57afdfd982d12f168edd6a79a65075d8)

Linux commit details about the sun8i-tcon-top.h sync:
"dt-bindings: display: sunxi-drm: Add TCON TOP description"
(sha1: 59a9c39544cd1e5952c2a33028d71aa8180648f8)

Part of the sync initiated by 'Clément Péron'.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-14 22:32:32 +05:30
Tom Rini
216800acf1 Merge branch 'master' of git://git.denx.de/u-boot-spi
Conflicts:
	arch/arm/dts/armada-385-amc.dts
	arch/arm/dts/armada-xp-theadorable.dts
	arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-14 00:03:06 -04:00
Anatolij Gustschin
275e8b622f imx6: dts: add wandboard dtb target to fix build error
Fix broken build:
Device Tree Source is not correctly specified.
Please define 'CONFIG_DEFAULT_DEVICE_TREE'
or build with 'DEVICE_TREE=<device_tree>' argument

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2019-04-13 20:30:10 +02:00