Commit Graph

65396 Commits

Author SHA1 Message Date
Marek Vasut
f6b5d51be5 sh: r2dplus: Enable board_eth_init only for non-DM case
The board_eth_init() is not used for DM case, enable it only for
the non-DM case. This function should eventually be removed.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-05-29 19:20:54 +02:00
Tom Rini
ab80137cc4 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell
- Fix SPI boot on ds414 (Ezra)
- Fix PHY mode definition on armada-3720-uDPU (Jakov)
- Convert CRS305-1G-4S to generic version (Luka)
2020-05-27 10:56:25 -04:00
Tom Rini
0d6a3e2322 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86
- Use device tree for FSP-M and FSP-S configuration on Intel Apollo Lake
- Add SMBIOS cbmem entry parsing for coreboot
- Various clean-ups to CBFS implementation
2020-05-27 10:55:55 -04:00
Simon Glass
0621b5e1ee cbfs: Don't require the CBFS size with cbfs_init_mem()
The size is not actually used since it is present in the header. Drop this
parameter. Also tidy up error handling while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27 14:40:09 +08:00
Simon Glass
03d4c298fa cbfs: Allow reading a file from a CBFS given its base addr
Currently we support reading a file from CBFS given the address of the end
of the ROM. Sometimes we only know the start of the CBFS. Add a function
to find a file given that.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27 14:40:09 +08:00
Simon Glass
924e346a66 cbfs: Change file_cbfs_find_uncached() to return an error
This function currently returns a node pointer so there is no way to know
the error code. Also it uses data in BSS which seems unnecessary since the
caller might prefer to use a local variable.

Update the function and split its body out into a separate function so we
can use it later.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27 14:40:09 +08:00
Simon Glass
0e7b6312e7 cbfs: Return the error code from file_cbfs_init()
We may as well return the error code and use it directly in the command
code. CBFS still uses its own error enum which we may be able to remove,
but leave it for now.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27 14:40:09 +08:00
Simon Glass
c685f8bcfc cbfs: Record the start address in cbfs_priv
The start address of the CBFS is used when scanning for files. It makes
sense to put this in our cbfs_priv struct and calculate it when we read
the header.

Update the code accordingly.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27 14:40:09 +08:00
Simon Glass
e82ab51baf cbfs: Use void * for the position pointers
It doesn't make sense to use u8 * as the pointer type for accessing the
CBFS since we do not access it as bytes, but via structures. Change it to
void *, which allows us to avoid a cast.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27 14:40:09 +08:00
Simon Glass
9dc2355e51 cbfs: Unify the two header loaders
These two functions have mostly the same code. Pull this out into a common
function.

Also make this function zero the private data so that callers don't have
to do it. Finally, update cbfs_load_header_ptr() to take the base of the
ROM as its parameter, which makes more sense than passing the address of
the header within the ROM.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27 14:40:09 +08:00
Simon Glass
a2c528fe8a cbfs: Adjust cbfs_load_header_ptr() to use cbfs_priv
This function is strange at the moment in that it takes a header pointer
but then accesses the cbfs_s global. Currently clients have their own priv
pointer, so update the function to take that as a parameter instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27 14:40:09 +08:00
Simon Glass
54e19257a9 cbfs: Adjust file_cbfs_load_header() to use cbfs_priv
This function is strange at the moment in that it takes a header pointer
but then accesses the cbfs_s global. Currently clients have their own priv
pointer, so update the function to take that as a parameter instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27 14:40:09 +08:00
Simon Glass
c7bef7cf90 cbfs: Adjust return value of file_cbfs_next_file()
At present this uses a true return to indicate it found a file. Adjust it
to use 0 for this, so it is consistent with other functions.

Update its callers accordingly and add a check for malloc() failure in
file_cbfs_fill_cache().

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27 14:40:09 +08:00
Simon Glass
381e1130a2 cbfs: Use bool type for whether initialised
At present this uses an int type. U-Boot now supports bool so use this
instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27 14:40:09 +08:00
Simon Glass
45637dbfce cbfs: Use ulong consistently
U-Boot uses ulong for addresses but there are a few places in this driver
that don't use it. Convert this driver over to follow this convention
fully.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27 14:40:09 +08:00
Simon Glass
ea38ee93ef cbfs: Rename the result variable
At present the result variable in the cbfs_priv is called 'result' as is
the local variable in a few functions. Change the latter to 'ret' which is
more common in U-Boot and avoids confusion.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27 14:40:09 +08:00
Christian Gmeiner
30cf2ba7c6 cbfs: drop file_cbfs_result declaration
It is not definded anywhere.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.gpk@gmx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27 14:40:09 +08:00
Christian Gmeiner
53942b9658 x86: coreboot: add SMBIOS cbmem entry parsing
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27 14:40:09 +08:00
Bernhard Messerklinger
d9e7efe10a x86: apl: Use devicetree for FSP-S configuration
A the moment the FSP-S configuration is a mix of hard coded values and
devicetree properties.

This patch makes FSP-S full configurable from devicetree by
adding binding properties for all FSP-S parameters.

Co-developed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org> (Tested on coral)
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27 14:40:09 +08:00
Bernhard Messerklinger
1fa6305fd6 x86: apl: Use devicetree for FSP-M configuration
A the moment the FSP-M configuration is a mix of hard coded values and
devicetree properties.

This patch makes FSP-M full configurable from devicetree by adding
binding properties for all FSP-M parameters.

Co-developed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org> (Tested on coral)
[sjg: Fix a build error for coral]
Signed-off-by: Simon Glass <sjg@chromium.org>
[bmeng: Add __maybe_unused to fsp_update_config_from_dtb()]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27 14:40:09 +08:00
Bernhard Messerklinger
832fee864c x86: apl: Only load VBT if CONFIG_HAVE_VBT is enabled
Only load VBT if it's present in the u-boot.rom.

Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org> (Tested on coral)
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27 14:40:09 +08:00
Simon Glass
b032db2725 x86: mtrr: Drop the mask display when changing an mtrr
We don't need to print this information since it is shown when the MTRRs
are displayed. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-27 14:40:09 +08:00
Luka Kovacic
df9ebbe17e arm: mvebu: Convert CRS305-1G-4S board to CRS3xx-98DX3236
Convert the CRS305-1G-4S board to CRS3xx-98DX3236 to enable easier
implementation of new CRS3xx series boards, based on Marvell Prestera
98DX3236.

Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Reviewed-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Jakov Petrina <jakov.petrina@sartura.hr>
2020-05-27 07:03:17 +02:00
Jakov Petrina
8678776df6 arm: mvebu: armada-3720-uDPU: fix PHY mode definition to sgmii-2500
Commit f49ac7e1c4 switched the default PHY speed to 3.125Gbit to resolve
issues with SFP modules. However, U-Boot does not have a "2500base-x"
phy-mode.

Resolve this by using "sgmii-2500" instead.

Signed-off-by: Jakov Petrina <jakov.petrina@sartura.hr>
Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
Reviewed-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Stefan Roese <sr@denx.de>
2020-05-27 07:03:01 +02:00
Ezra Buehler
0700093b85 arm: mvebu: ds414: define CONFIG_SYS_U_BOOT_OFFS
Without CONFIG_SYS_U_BOOT_OFFS set to CONFIG_SYS_SPI_U_BOOT_OFFS, U-Boot
will be located at address 0x16000. But, SPL will try to load the
payload from 0x24000 causing the boot to hang.

Signed-off-by: Ezra Buehler <ezra@easyb.ch>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-05-27 07:02:24 +02:00
Ezra Buehler
a1a61b0672 arm: mvebu: ds414: add u-boot,dm-pre-reloc to spi0
Without this U-Boot-specific property, booting on the Synology DS414
(or DS214+) fails in SPL. The spi0 DT node is not scanned, as a result
the SPI flash cannot be found.

Signed-off-by: Ezra Buehler <ezra@easyb.ch>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-05-27 07:02:24 +02:00
Tom Rini
0ab24c37f0 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscv
- sifive: fix palmer's email address.
- Move all SMP related SBI calls to SBI_v01.
2020-05-26 15:27:04 -04:00
Tom Rini
32a8f800a9 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-26 08:35:55 -04:00
Pragnesh Patel
4ef196ce20 sifive: fix palmer's email address
Fix Palmer's email address

Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-05-26 15:50:15 +08:00
Atish Patra
7e249bc13a riscv: Move all SMP related SBI calls to SBI_v01
SMP support for S-mode U-Boot is enabled only if SBI_V01 is enabled.
There is no point in supporting SMP related (IPI and fences) SBI calls
when SBI_V02 is enabled.

Modify all the SMP related SBI calls to be defined only for SBI_V01.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-26 15:50:08 +08:00
Tom Rini
8c48bb21bd Prepare v2020.07-rc3
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-25 20:34:01 -04:00
Tom Rini
60c7facfc9 Merge tag 'ti-v2020.07-rc3' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti
- Enable DM_ETH on omap3_logic board
- Enable Caches in SPL for K3 platforms
- Enable backup boot mode support for J721E
- Update the DDR timings for AM654 EVM
- Add automated tests for RX-51
2020-05-25 14:09:42 -04:00
Tom Rini
71f70cfcf4 Merge branch '2020-05-25-misc-fixes'
- A few minor Kconfig migrations / corrections
- DFU doc fixes/improvements
- Bugfix for ARMv8, env userspace building, more NULL checks in generic
  PHY code
2020-05-25 11:56:57 -04:00
Michael Walle
efc0644802 sandbox: move compression option to Kconfig
CONFIG_BZIP2 and CONFIG_GZIP_COMPRESSED are Kconfig options. Select them
by CONFIG_SANDBOX instead of setting them in configs/sandbox.h.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-25 11:54:53 -04:00
Michael Walle
2843444a6e cmd: zip: fix implicit declaration warning
Fix the following warning:

cmd/zip.c: In function ‘do_zip’:
cmd/zip.c:30:6: warning: implicit declaration of function ‘gzip’; did you mean ‘do_zip’? [-Wimplicit-function-declaration]
  if (gzip((void *) dst, &dst_len, (void *) src, src_len) != 0)
      ^~~~
      do_zip

Include gzip.h header which declares the gzip() function.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-25 11:54:53 -04:00
Michael Walle
eff5a54758 cmd: zip: automatically pull in gzip()
Move the CONFIG_GZIP_COMPRESSED from a config.h macro to a Kconfig menu
item. It is not selectable by a user because there is no reason to do
so. Instead it will be automatically selected by the stuff which uses
gzip(), like the zip command.

Remove it from the config_whitelist.txt. Also remove
CONFIG_GZIP_COMPRESS_DEF_SZ as this was never used on any board. The
default seems to be sane, otherwise it should be added as a Kconfig
option.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-25 11:54:53 -04:00
Michael Walle
56c311bd82 cmd: unzip: automatically select CONFIG_GZIP
unzip calls gzwrite() which is provided in lib/gunzip.c. Make sure it is
automatically pulled in if the user selects CMD_UNZIP.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Heinrich Schuchardt <xypron.glkp@gmx.de>
2020-05-25 11:54:53 -04:00
Marek Vasut
3ec46991d7 env: Convert ENV_ACCESS_IGNORE_FORCE to Kconfig
Convert ENV_ACCESS_IGNORE_FORCE to Kconfig, no functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@konsulko.com>
2020-05-25 11:54:53 -04:00
Romain Naour
2aca8804d8 tools/env/fw_env.h: remove env.h
As reported by Nicolas Carrier on the Buildroot mailing list [1],
there is a new build issue while building a program which interacts with
the u-boot environment. This program uses the headers of the ubootenv
library provided by uboot-tools.

This is a recent change from uboot [2] adding "#include <env.h>" to
fw_env.h. Adding env.h require a board configuration to build since
it also include compiler.h (and others uboot internal includes).

env.h include seems not needed since env_set() is not used in fw_env tool.

Nicolas removed env.h from fw_env tool and fixed it's build issue.

This problem is present since uboot v2019.10.

[1] http://lists.busybox.net/pipermail/buildroot/2020-April/280307.html
[2] 9fb625ce05

Reported-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
2020-05-25 11:54:53 -04:00
Tom Rini
35e3991d91 Convert CONFIG_CMD_MMC to Kconfig
This converts the following to Kconfig:
   CONFIG_CMD_MMC

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-25 11:54:53 -04:00
Vignesh Raghavendra
64b69f8c89 phy: Fix possible NULL pointer deference
It is possible that users of generic_phy_*() APIs may pass a valid
struct phy pointer but phy->dev can be NULL, leading to NULL pointer
deference in phy_dev_ops().

So call generic_phy_valid() to verify that phy and phy->dev are both
valid.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-05-25 11:54:53 -04:00
Heinrich Schuchardt
f4c1f705aa MAINTAINERS: add dfu.h and dfu.rst to DFU
include/dfu.h and doc/api/dfu.rst belong to the device firmware update
sub-system. So let's add them to DFU in MAINTAINERS.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Lukasz Majewski <lukma@denx.de>
2020-05-25 11:54:53 -04:00
Heinrich Schuchardt
d181191e12 doc: dfu: describe more DFU function
Add some of the missing DFU function descriptions.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Lukasz Majewski <lukma@denx.de>
2020-05-25 11:54:53 -04:00
Heinrich Schuchardt
3547e69b47 doc: dfu: fix typos in README.dfu
Fix some typos.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Lukasz Majewski <lukma@denx.de>
2020-05-25 11:54:53 -04:00
Heinrich Schuchardt
f39c8454b5 doc: dfu: add DFU to HTML documentation
Add the device firmware update functions to the generated HTML
documentation.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Lukasz Majewski <lukma@denx.de>
2020-05-25 11:54:53 -04:00
Heinrich Schuchardt
378fc83ebd doc: dfu: describe eMMC partition number parameter
In dfu_alt_info for eMMC the eMMC partition number can be specified.

The separator in dfu_alt_info is a semicolon not a comma.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Lukasz Majewski <lukma@denx.de>
2020-05-25 11:54:53 -04:00
Heinrich Schuchardt
51028db1ca MAINTAINERS: add doc/driver-model/ to DRIVER MODEL
The documentation should rest with the same maintainer as the code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-25 11:54:53 -04:00
Peng Fan
b4b2619211 armv8: cache_v8: fix mmu_set_region_dcache_behaviour
The enum dcache_optoion contains a shift left 2 bits in the armv8 case
already.  The PMD_ATTRINDX(option) macro will perform a left shift of 2
bits.  Perform a right shift so that in the end we get the correct
value.

[trini: Reword the commit message]
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-25 11:54:53 -04:00
Tom Rini
9c5fef5774 Merge git://git.denx.de/u-boot-usb
- DM support for OMAP
- DWC3 fix
- Typo fix in eth/r8152
2020-05-22 22:58:50 -04:00
Tom Rini
5b6b2c6bf8 Merge branch 'net' of git://git.denx.de/u-boot-socfpga
- ks8851 cleanups and DM migration
2020-05-22 22:58:16 -04:00