- Fix SPI boot on ds414 (Ezra)
- Fix PHY mode definition on armada-3720-uDPU (Jakov)
- Convert CRS305-1G-4S to generic version (Luka)
This commit is contained in:
Tom Rini 2020-05-27 10:56:25 -04:00
commit ab80137cc4
16 changed files with 179 additions and 147 deletions

View File

@ -125,14 +125,14 @@
&eth0 {
pinctrl-0 = <&pcie_pins>;
status = "okay";
phy-mode = "2500base-x";
phy-mode = "sgmii-2500";
managed = "in-band-status";
phy = <&ethphy0>;
};
&eth1 {
status = "okay";
phy-mode = "2500base-x";
phy-mode = "sgmii-2500";
managed = "in-band-status";
phy = <&ethphy1>;
};

View File

@ -1,110 +1,17 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for CRS305-1G-4S board
* Device Tree file for MikroTik CRS305-1G-4S+ board
*
* Copyright (C) 2016 Allied Telesis Labs
*
* Based on armada-xp-db.dts
*
* Note: this Device Tree assumes that the bootloader has remapped the
* internal registers to 0xf1000000 (instead of the default
* 0xd0000000). The 0xf1000000 is the default used by the recent,
* DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
* boards were delivered with an older version of the bootloader that
* left internal registers mapped at 0xd0000000. If you are in this
* situation, you should either update your bootloader (preferred
* solution) or the below Device Tree should be adjusted.
* Copyright (C) 2020 Sartura Ltd.
* Author: Luka Kovacic <luka.kovacic@sartura.hr>
*/
/dts-v1/;
#include "armada-xp-98dx3236.dtsi"
#include "armada-xp-crs305-1g-4s-u-boot.dtsi"
#include "armada-xp-crs305-1g-4s.dtsi"
/ {
model = "CRS305-1G-4S";
compatible = "marvell,armadaxp-98dx3236", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
chosen {
stdout-path = "serial0:115200n8";
bootargs = "console=ttyS0,115200 earlyprintk";
};
aliases {
spi0 = &spi0;
};
memory {
device_type = "memory";
reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
};
};
&L2 {
arm,parity-enable;
marvell,ecc-enable;
};
&devbus_bootcs {
status = "okay";
/* Device Bus parameters are required */
/* Read parameters */
devbus,bus-width = <16>;
devbus,turn-off-ps = <60000>;
devbus,badr-skew-ps = <0>;
devbus,acc-first-ps = <124000>;
devbus,acc-next-ps = <248000>;
devbus,rd-setup-ps = <0>;
devbus,rd-hold-ps = <0>;
/* Write parameters */
devbus,sync-enable = <0>;
devbus,wr-high-ps = <60000>;
devbus,wr-low-ps = <60000>;
devbus,ale-wr-ps = <60000>;
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};
&i2c0 {
clock-frequency = <100000>;
status = "okay";
};
&usb0 {
status = "okay";
model = "MikroTik CRS305-1G-4S+";
};
&spi0 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-flash", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
m25p,fast-read;
partition@u-boot {
reg = <0x00000000 0x00100000>;
label = "u-boot";
};
partition@u-boot-env {
reg = <0x00100000 0x00040000>;
label = "u-boot-env";
};
partition@unused {
reg = <0x00140000 0x00ec0000>;
label = "unused";
};
};
};

View File

@ -0,0 +1,111 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for CRS305-1G-4S board
*
* Copyright (C) 2016 Allied Telesis Labs
* Copyright (C) 2020 Sartura Ltd.
*
* Based on armada-xp-db.dts
*
* Note: this Device Tree assumes that the bootloader has remapped the
* internal registers to 0xf1000000 (instead of the default
* 0xd0000000). The 0xf1000000 is the default used by the recent,
* DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
* boards were delivered with an older version of the bootloader that
* left internal registers mapped at 0xd0000000. If you are in this
* situation, you should either update your bootloader (preferred
* solution) or the below Device Tree should be adjusted.
*/
/dts-v1/;
#include "armada-xp-98dx3236.dtsi"
#include "armada-xp-crs305-1g-4s-u-boot.dtsi"
/ {
model = "CRS305-1G-4S+";
compatible = "marvell,armadaxp-98dx3236", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
chosen {
stdout-path = "serial0:115200n8";
bootargs = "console=ttyS0,115200 earlyprintk";
};
aliases {
spi0 = &spi0;
};
memory {
device_type = "memory";
reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
};
};
&L2 {
arm,parity-enable;
marvell,ecc-enable;
};
&devbus_bootcs {
status = "okay";
/* Device Bus parameters are required */
/* Read parameters */
devbus,bus-width = <16>;
devbus,turn-off-ps = <60000>;
devbus,badr-skew-ps = <0>;
devbus,acc-first-ps = <124000>;
devbus,acc-next-ps = <248000>;
devbus,rd-setup-ps = <0>;
devbus,rd-hold-ps = <0>;
/* Write parameters */
devbus,sync-enable = <0>;
devbus,wr-high-ps = <60000>;
devbus,wr-low-ps = <60000>;
devbus,ale-wr-ps = <60000>;
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};
&i2c0 {
clock-frequency = <100000>;
status = "okay";
};
&usb0 {
status = "okay";
};
&spi0 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-flash", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
m25p,fast-read;
partition@u-boot {
reg = <0x00000000 0x00080000>;
label = "u-boot";
};
partition@u-boot-env {
reg = <0x00080000 0x00010000>;
label = "u-boot-env";
};
partition@firmware {
reg = <0x00090000 0x00f70000>;
label = "firmware";
};
};
};

View File

@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0+
&spi0 {
u-boot,dm-pre-reloc;
spi-flash@0 {
u-boot,dm-pre-reloc;
};
};

View File

@ -165,8 +165,8 @@ config TARGET_DB_XC3_24G4XG
bool "Support DB-XC3-24G4XG"
select 98DX3336
config TARGET_CRS305_1G_4S
bool "Support CRS305-1G-4S"
config TARGET_CRS3XX_98DX3236
bool "Support CRS3XX-98DX3236"
select 98DX3236
endchoice
@ -188,7 +188,7 @@ config SYS_BOARD
default "a38x" if TARGET_CONTROLCENTERDC
default "x530" if TARGET_X530
default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG
default "crs305-1g-4s" if TARGET_CRS305_1G_4S
default "crs3xx-98dx3236" if TARGET_CRS3XX_98DX3236
config SYS_CONFIG_NAME
default "clearfog" if TARGET_CLEARFOG
@ -207,7 +207,7 @@ config SYS_CONFIG_NAME
default "controlcenterdc" if TARGET_CONTROLCENTERDC
default "x530" if TARGET_X530
default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG
default "crs305-1g-4s" if TARGET_CRS305_1G_4S
default "crs3xx-98dx3236" if TARGET_CRS3XX_98DX3236
config SYS_VENDOR
default "Marvell" if TARGET_DB_MV784MP_GP
@ -225,7 +225,7 @@ config SYS_VENDOR
default "CZ.NIC" if TARGET_TURRIS_MOX
default "gdsys" if TARGET_CONTROLCENTERDC
default "alliedtelesis" if TARGET_X530
default "mikrotik" if TARGET_CRS305_1G_4S
default "mikrotik" if TARGET_CRS3XX_98DX3236
config SYS_SOC
default "mvebu"

View File

@ -1,7 +0,0 @@
CRS305-1G-4S BOARD
M: Luka Kovacic <me@lukakovacic.xyz>
S: Maintained
F: board/mikrotik/crs305-1g-4s/
F: include/configs/crs305-1g-4s.h
F: configs/crs305-1g-4s_defconfig
F: arch/arm/dts/armada-xp-crs305-1g-4s.dts

View File

@ -0,0 +1,11 @@
CRS3XX-98DX3236 BOARD
M: Luka Kovacic <luka.kovacic@sartura.hr>
S: Maintained
F: board/mikrotik/crs3xx-98dx3236/
F: include/configs/crs3xx-98dx3236.h
CRS305-1G-4S BOARD
M: Luka Kovacic <luka.kovacic@sartura.hr>
S: Maintained
F: configs/crs305-1g-4s_defconfig
F: arch/arm/dts/armada-xp-crs305-1g-4s.dts

View File

@ -2,7 +2,7 @@
#
# Copyright (C) 2015 Stefan Roese <sr@denx.de>
obj-y := crs305-1g-4s.o
obj-y := crs3xx-98dx3236.o
extra-y := kwbimage.cfg
quiet_cmd_sed = SED $@

View File

@ -1,13 +1,13 @@
MikroTik CRS305-1G-4S+IN
MikroTik CRS3XX-98DX3236
========================
CRS305-1G-4S+IN is a 4x SFP+ switch with a Gigabit Ethernet port for management.
Specifications:
CRS3XX-98DX3236 is a U-Boot port that supports a series of MikroTik switches
based on the Marvell Prestera 98DX3236 switch with an integrated CPU.
Common specifications:
- Marvell Prestera 98DX3236 switch with an integrated ARMv7 CPU
- 512 MB DDR3 RAM
- UART @ 115200bps
- 4x SFP+
- Gigabit Ethernet (AR8033)
- 16 MB SPI flash (Winbond 25Q128JVSM)
Currently supported hardware:
@ -15,7 +15,7 @@ Currently supported hardware:
- SPI boot, environment and load kernel
Planned:
- Gigabit Ethernet support
- Gigabit Ethernet support (internal CPU <-> switch fabric connection)
Getting binary.0
================

View File

@ -9,4 +9,4 @@ VERSION 1
BOOT_FROM spi
# Binary Header (bin_hdr) with DDR3 training code
BINARY board/mikrotik/crs305-1g-4s/binary.0 0000005b 00000068
BINARY board/mikrotik/crs3xx-98dx3236/binary.0 0000005b 00000068

View File

@ -3,48 +3,46 @@ CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_MVEBU=y
CONFIG_SYS_TEXT_BASE=0x00800000
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_TARGET_CRS305_1G_4S=y
CONFIG_TARGET_CRS3XX_98DX3236=y
CONFIG_ENV_SIZE=0x10000
CONFIG_ENV_OFFSET=0x100000
CONFIG_ENV_SECT_SIZE=0x40000
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_ENV_OFFSET=0x80000
# CONFIG_EFI_LOADER is not set
CONFIG_BUILD_TARGET="u-boot.kwb"
CONFIG_USE_PREBOOT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Autoboot in %d seconds, to stop use 's' key\n"
CONFIG_AUTOBOOT_STOP_STR="s"
CONFIG_AUTOBOOT_KEYED_CTRLC=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_MEMTEST=y
CONFIG_SYS_ALT_MEMTEST=y
CONFIG_SYS_MEMTEST_START=0x00800000
CONFIG_SYS_MEMTEST_END=0x00ffffff
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_I2C=y
# CONFIG_CMD_I2C is not set
CONFIG_CMD_SPI=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_CMD_UBI=y
# CONFIG_CMD_UBI is not set
CONFIG_CMD_MTD=y
CONFIG_CMD_MTDPARTS=y
CONFIG_DEFAULT_DEVICE_TREE="armada-xp-crs305-1g-4s"
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_BLK=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MVTWSI=y
# CONFIG_DM_I2C is not set
# CONFIG_SYS_I2C_MVTWSI is not set
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_DM_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_SPI_FLASH_SFDP_SUPPORT=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_SST=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_WINBOND=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_FIT=y
CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_PCI=y
CONFIG_PCI_MVEBU=y
CONFIG_SYS_NS16550=y

View File

@ -3,8 +3,8 @@
* Copyright (C) 2014 Stefan Roese <sr@denx.de>
*/
#ifndef _CONFIG_CRS305_1G_4S_H
#define _CONFIG_CRS305_1G_4S_H
#ifndef _CONFIG_CRS3XX_98DX3236_H
#define _CONFIG_CRS3XX_98DX3236_H
/*
* High Level Configuration Options (easy to change)
@ -32,4 +32,4 @@
#undef CONFIG_SYS_MAXARGS
#define CONFIG_SYS_MAXARGS 96
#endif /* _CONFIG_CRS305_1G_4S_H */
#endif /* _CONFIG_CRS3XX_98DX3236_H */

View File

@ -87,7 +87,10 @@
#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))
#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)
#if defined(CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI)
/* SPL related SPI defines */
#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
#endif
/* DS414 bus width is 32bits */
#define CONFIG_DDR_32BIT