Commit Graph

192 Commits

Author SHA1 Message Date
Mauro Condarelli
3fd0231432 mips: Add support for SoM "VoCore2".
Small patch to add support for VoCore/VoCore2 board.

VoCore is open hardware and runs OpenWrt/LEDE.
It has WIFI, USB, UART, 20+ GPIOs but is only one inch square.
It will help you to make a smart house, study embedded system
or even make the tiniest router in the world.

Details about this SoM can be found at "https://vocore.io/v2.html".

Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-27 20:30:14 +02:00
Weijie Gao
6bd888b63b mips: mtmips: add support for mt7628-rfb
This patch adds support for mt7628 reference board. SPL_DM and DT are not
enabled for SPL to save about 17KiB for u-boot-spl.bin.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27 20:30:13 +02:00
Weijie Gao
7a4b6964b5 mips: mtmips: add SPL support
This patch adds SPL support for mtmips platform. The lowlevel architecture
is split into SPL and the rest parts are built into a memory loadable
u-boot image. Optional SPL_DM and OF_CONTROL are also supported.

The increment of size is very small (< 10 KiB) if SPL_DM and OF_CONTROL are
not enabled and the memory bootable u-boot (u-boot.img) is generated
automatically so there is not need to add a separate config for it.

A lzma compressed payload (u-boot-lzma.img) is also generated and it will
be combined with u-boot-spl.bin to form the unified ROM bootable binary
u-boot-mtmips.bin.

A spl loader is added to support uncompress the payload.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27 20:30:12 +02:00
Weijie Gao
df3bad96f3 dts: mtmips: add alternative pinmux node for uart2
This patch adds a new pinmux for UART2, which shares the pins with SPIS.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27 20:29:33 +02:00
Weijie Gao
c366a45649 mips: mtmips: make use of sysreset-resetctrl for mt7628 soc
This patch replaces sysreset-syscon with sysreset-resetctrl for mt7628 soc.

Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27 20:29:33 +02:00
Weijie Gao
4e2ccca26d dts: mtmips: add default pinctrl to eth nodes for all boards
This patch adds default eth pinctrl for all boards.

There are two pinctrl nodes used for two scenarios:
ephy_iot_mode    - for IOT boards which have only one port (PHY0)
ephy_router_mode - For routers which have more than one ports

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25 17:20:44 +02:00
Weijie Gao
ef55fa03d4 dts: mtmips: add default pinctrl for gardena-smart-gateway-mt7688
This adds default pinctrl (dual SPI chip select) for gardena smart gateway

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25 17:20:44 +02:00
Weijie Gao
e3b326fee5 dts: mtmips: add mmc related nodes for mt7628an.dtsi
This patch adds mmc related nodes for mt7628an.dtsi

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25 17:20:44 +02:00
Weijie Gao
cff0b044d2 dts: mtmips: enable eth port0 led and link poll functions for all boards
This patch adds default p0led status and phy0 link polling for all boards.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25 17:20:44 +02:00
Weijie Gao
6658ebc96a dts: mtmips: update reset controller node for mt7628
This patch updates reset controller node for mt7628

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25 17:20:44 +02:00
Weijie Gao
123ffd4679 dts: mtmips: add default pinctrl for uart nodes
This patch adds default pinctrl for uart nodes

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25 17:20:44 +02:00
Weijie Gao
fdf92df285 dts: mtmips: add pinctrl node for mt7628
This patch adds pinctrl node with default pin state for mt7628an.dtsi.

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25 17:20:44 +02:00
Weijie Gao
2d767a7497 dts: mtmips: add clock node for mt7628
This patch adds clkctrl node for mt7628 and adds clocks property for
some node.

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25 17:20:44 +02:00
Weijie Gao
5fcea8d3f9 dts: mtmips: enable high-speed UART support for mt7628
All three UARTs of mt7628 are actually MediaTek's high-speed UARTs which
support baudrate up to 921600.
The high-speed UART is compatible with ns16550 when baudrate <= 115200.

Add compatible string to dtsi file so u-boot can use it when serial_mtk
driver is built in.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25 17:20:44 +02:00
Weijie Gao
d1d8814458 dts: mtmips: move uart property clock-frequency into mt7628an.dtsi
The UART of MT7628 has fixed 40MHz input clock so there is no need to put
clock-frequency in every dts files. Just put it into the common dtsi file.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-10-25 17:20:44 +02:00
Álvaro Fernández Rojas
a69bae04fd mips: bmips: switch to board defines for dtb
Fixes commit 344db3f, which added missing bmips dtbs depending on their SoCs.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-10-25 17:20:43 +02:00
Álvaro Fernández Rojas
f923c758e0 bmips: correct name characters
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-10-25 17:20:43 +02:00
Álvaro Fernández Rojas
331bee8786 bmips: enable vr-3032u nand support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-10-25 17:20:43 +02:00
Álvaro Fernández Rojas
0f57c932f9 bmips: bcm63268: add support for brcmnand
BCM63268 uses 4.0 HW nand controller, which is currently supported by
brcmnand driver.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-10-25 17:20:43 +02:00
Álvaro Fernández Rojas
c4bf879063 bmips: bcm6362: add support for brcmnand
BCM6362 uses old 2.2 HW nand controller, which isn't currently supported by
brcmnand driver.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-10-25 17:20:43 +02:00
Álvaro Fernández Rojas
12dfa45947 bmips: bcm6328: add support for brcmnand
BCM6328 uses old 2.2 HW nand controller, which isn't currently supported by
brcmnand driver.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-10-25 17:20:43 +02:00
Álvaro Fernández Rojas
edbd175c66 bmips: bcm6368: add support for brcmnand
BCM6368 uses old 2.1 HW nand controller, which isn't currently supported by
brcmnand driver.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-10-25 17:20:43 +02:00
Horatiu Vultur
5c629b1b69 net: mscc: ocelot: Update DTS for Luton pcb90
Update device tree for luton to add support for luton pcb90.
This pcb has 24 ports from which 12 ports are connected to
SerDes6G.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-05-03 16:46:36 +02:00
Weijie Gao
16b94903e2 mips: rename mach-mt7620 to mach-mtmips
Currently mach-mt7620 contains only support for mt7628. To avoid confusion,
rename mach-mt7620 to mach-mtmips, which means MediaTek MIPS platforms.
MT7620 and MT7628 should be distinguished by SOC_MT7620 and SOC_MT7628
because they do not share the same lowlevel codes.

Dependencies of four drivers are changed to SOC_MT7628 as these drivers
are only used by MT7628.

Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-05-03 16:43:11 +02:00
Horatiu Vultur
8c211af8f8 net: mscc: ocelot: Update DTS for Ocelot pcb120.
Update device tree for ocelot to add support for ocelot pcb120.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-05-03 16:42:24 +02:00
Horatiu Vultur
4788704dd8 net: mscc: serval: Add ethernet nodes for Serval
Add ethernet nodes for Serval SoCs family. There are 2 pcb in this
family: pcb105 and pcb106.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-05-03 16:42:23 +02:00
Philippe Reynes
92cd0047a9 dt: bcm968380gerg: enable nand controller
Enable the nand controller in the device tree
of the board bcm96838gerg.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22 11:56:29 -04:00
Philippe Reynes
d8d9bfb90b dt: bcm6838: add nand controller
Add the nand controller in the bcm6838 device tree.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22 11:55:58 -04:00
Tom Rini
216800acf1 Merge branch 'master' of git://git.denx.de/u-boot-spi
Conflicts:
	arch/arm/dts/armada-385-amc.dts
	arch/arm/dts/armada-xp-theadorable.dts
	arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-14 00:03:06 -04:00
Horatiu Vultur
da843eab1f net: mscc: servalt: Add ethernet nodes for ServalT
Add ethernet nodes for ServalT SoCs family. Currently there is only one
pcb(pcb116) in this family.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-04-12 17:32:53 +02:00
Horatiu Vultur
1141176163 net: mscc: jaguar2: Add ethenet nodes for Jaguar2.
Add ethernet nodes for Jaguar2 SoCs family. There are 3 pcb in this
family: pcb110, pcb111 and pcb112.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-04-12 17:32:51 +02:00
Philippe Reynes
f1ed3cfc53 dt: bcm968380gerg: enable gpio controller
Enable the gpio controllers in the device tree
of the board bcm968380gerg.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-04-12 17:32:51 +02:00
Philippe Reynes
ce171053a8 dt: bcm6838: add gpio controller
Add gpio controllers in bcm6838 device tree.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-04-12 17:32:51 +02:00
Rosy Song
61290fb52c mips: add initial support for qca956x referenced board
QCA9563 is CPU used on AP152 board :

    Clock speed : 750 MHz ,
    Arch :  Mips 74Kc,
    Eth : SGMII interface,
    MIMO config : 3 * 3 450M,
    2 * USB 2.0,

Signed-off-by: Rosy Song <rosysong@rosinson.com>

Changes for v2:
   - coding style cleanup
   - remove ununsed flash chip in defconfig
   - enable automatic icache / dcache size in defconfig

Changes for v3:
   - add detailed information for qca956x in commit message

Changes for v4:
   - remove pre-configured network settings in ap152.h

Changes for v5:
   - coding style cleanup
2019-04-12 17:32:50 +02:00
Stefan Roese
eacbdd64cc mips: mt76xx: gardena-smart-gateway: Correct spelling of GARDENA
This patch changes Gardena to the correct GARDENA spelling. Also the
platform name is "GARDENA smart Gateway". This patch changes the
incorrect occurrances.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-04-12 17:32:50 +02:00
Rosy Song
395e2d43bd mips: add ethernet support for qca953x referenced boards
Signed-off-by: Rosy Song <rosysong@rosinson.com>
2019-04-12 17:32:50 +02:00
Neil Armstrong
ffd4c7c2ec dts: switch spi-flash to jedec, spi-nor compatible
There is no reason not to use the Linux "jedec,spi-nor" binding in U-Boot
dts files. This compatible has been added in sf_probe, let use it.

This patch switches to jedec,spi-nor when spi-flash is used in the DTS
and DTSI files, and removed spi-flash when jedec,spi-nor is already
present.

The x86 dts are switched in a separate commit since it depends on a change
in fdtdec.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Evgeniy Paltsev <paltsev@synopsys.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Reviewed-by: Patrick Delaunay <Patrick.delaunay@st.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2019-04-12 10:54:27 +05:30
Masahiro Yamada
344db3f330 mips: add missing dtb-y to arch/mips/dts/Makefile
Since commit 27cb7300ff ("Ensure device tree DTS is compiled"),
build succeeds irrespective of the correctness of Makefile.

In fact, you can compile any defconfig without adding any entry in
arch/*/dts/Makefile.

I am going to revert that commit, so device tree must be explicitly
listed in Makefile.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-03-22 12:15:12 -04:00
Philippe Reynes
0900036561 dt: bcm6838: add watchdog
This commit add watchdog and sysreset watchdog
in the bcm6838 device tree.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-02-09 07:50:50 -05:00
Horatiu Vultur
ee7b65f2cc mips: mscc: luton: Add ethernet nodes for Luton.
Add nodes for pcb090 and pcb091. There is currently no support
in Linux for this SoC.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-02-01 14:13:36 +01:00
Horatiu Vultur
a834cb817f MSCC: Add board support for Serval SoC family.
Add board support and configuration for Jaguar2 SoC family.
The detection of the board type is based on the phy ids.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-23 18:28:09 +01:00
Horatiu Vultur
6621288838 MSCC: Add device tree for Serval pcb106 board
Add device tree based on evaluation board pcb106.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-23 18:28:09 +01:00
Horatiu Vultur
dda17e39c1 MSCC: add device tree for Serval pcb105 board
Add device tree based on evaluation board pcb105.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-23 18:28:09 +01:00
Horatiu Vultur
036d95958b MSCC: Add board support for Servalt SoC family
Add board support, configuration and DTS for Servalt SoC
family. Currently there is one board in this family.

Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-23 18:27:26 +01:00
Gregory CLEMENT
55037902b8 MIPS: mscc: ocelot: Add ethernet nodes for Ocelot
Import Ethernet related nodes from Linux

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-01-23 18:25:43 +01:00
Stefan Roese
49f0b6bab9 mips: mt7688: gardena-smart-gateway: Enable green power LED on startup
Set the correct power-up state (default-state) of the green power LED.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-16 14:00:26 +01:00
Horatiu Vultur
c75c908316 MSCC: Add board support for Jaguar2 SOC family
Add board support and configuration for Jaguar2 SOC family.
The detection of the board type in this family is based on the phy ids.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-16 13:56:43 +01:00
Horatiu Vultur
393b77d8f9 MSCC: add device tree for Serval2 board
Add device tree based on evaluation board pcb112.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-16 13:56:43 +01:00
Horatiu Vultur
297edaec12 MSCC: Add device tree for Jaguar2-48 board
Add device tree based on evaluation board pcb111.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-16 13:56:43 +01:00
Horatiu Vultur
d1182056d3 MSCC: Add device tree for Jaguar2 board
Add device tree based on evaluation board pcb110.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-16 13:56:43 +01:00