Commit Graph

3908 Commits

Author SHA1 Message Date
Timur Tabi
b8ec238503 85xx: add ability to upload QE firmware
Define the layout of a binary blob that contains a QE firmware and instructions
on how to upload it.  Add function qe_upload_firmware() to parse the blob and
perform the actual upload.  Add command-line command "qe fw" to take a firmware
blob in memory and upload it.  Update ft_cpu_setup() on 85xx to create the
'firmware' device tree node if U-Boot has uploaded a firmware.  Fully define
'struct rsp' in immap_qe.h to include the actual RISC Special Registers.

Signed-off-by: Timur Tabi <timur@freescale.com>
2008-01-09 16:28:12 -06:00
Kumar Gala
b009f3eca9 85xx: Remove cache config from configs.h
Either use the standard defines in asm/cache.h or grab the information
at runtime from the L1CFG SPR.

Also, minor cleanup in cache.h to make the code a bit more readable.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-09 16:25:04 -06:00
robert lazarski
b964e9368f mpc85xx: Add support for ATUM8548 (updated)
Add support for Instituto Atlantico's ATUM8548 board

Signed-off-by: robert lazarski <robertlazarski@gmail.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2008-01-09 16:25:04 -06:00
robert lazarski
7bd6104b71 mpc85xx: Add support for ATUM8548 (updated)
Add support for Instituto Atlantico's ATUM8548 board

Signed-off-by: robert lazarski <robertlazarski@gmail.com>
2008-01-09 16:25:03 -06:00
Joe Hamman
9e3ed392d2 mpc85xx: Add support for SBC8548 (updated)
Add support for Wind River's SBC8548 reference board.

Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
2008-01-09 16:25:03 -06:00
Joe Hamman
11c45ebd46 mpc85xx: Add support for SBC8548 (updated)
Add support for Wind River's SBC8548 reference board.

Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
Signed-off by: Andy Fleming <afleming@freescale.com>
2008-01-09 16:25:03 -06:00
Anton Vorontsov
64d4bcb087 MPC8568E-MDS: set up QE pario for UART1
To use UART1 on the MPC8568E-MDS, QE pario pins PC[0:3] should
be set up appropriately.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2008-01-09 16:25:03 -06:00
Anton Vorontsov
ad162249cb MPC8568E-MDS: reset UCCs to use them reliably
In order to use GETH1 and GETH2 on the MPC8568E-MDS, we should reset
UCCs.

p.s Similar code exists in the Linux kernel board file (for capability
reasons with older U-Boots), but should be removed some day.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2008-01-09 16:25:03 -06:00
Kumar Gala
2146cf5682 Reworked FSL Book-E TLB macros to be more readable
The old macros made it difficult to know what WIMGE and perm bits
were set for a TLB entry.  Actually use the bit masks for these items
since they are only a single bit.

Also moved the macros into mmu.h out of e500.h since they aren't specific
to e500.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-09 16:25:03 -06:00
Kumar Gala
1d47273d46 Use FSL Book-E MMU macros from Linux Kernel
Grab the FSL Book-E MAS register macros from Linux.  Also added
defines for page sizes up to 4TB and removed SHAREN since it doesnt
really exist.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-09 16:25:03 -06:00
Wolfgang Denk
cc557950f7 Merge branch 'master' of git://www.denx.de/git/u-boot-usb 2008-01-09 22:41:02 +01:00
Guennadi Liakhovetski
7ca9051348 trivial: fix consequences of a bad merge
Fix what looks like a merge artifact.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-01-09 22:27:09 +01:00
Zhang Wei
4785a694c0 Add Ctrl combo key support to usb keyboard driver.
Ctrl combo key support is added, which is very useful to input Ctrl-C
for interrupt current job.
Also add usb_event_poll() calling to usb_kbd_testc(), which can get
key input when tstc() is called.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
2008-01-09 21:52:23 +01:00
Marcel Ziswiler
10c7382bc5 fix various comments
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2008-01-09 21:50:47 +01:00
Marcel Ziswiler
7817cb2083 fix comments with new drivers organization
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2008-01-09 21:48:49 +01:00
Shinya Kuribayashi
a9b410dc7d Remove the obsolete terse version of do_mii()
We now have more useful version of do_mii() and everybody use it.
Gerald Van Baren says:

> When I originally wrote the mii command 6(!) years ago, I wrote a
> verbose version that printed human readable decomposition of the flags,
> etc., and a terse one that didn't print as much stuff and thus had a
> smaller memory footprint.
>
> It sounds like the terse version has withered and died, apparently
> people are only using the verbose version (which is very understandable,
> I do myself).

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
2008-01-09 21:44:22 +01:00
Mike Frysinger
01c687aa6e Do not reference sha1.c when building mkimage.
remove sha1.o from mkimage linking since it isn't actually used.

Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
2008-01-09 21:42:04 +01:00
Shinya Kuribayashi
b9173af73e common/cmd_mii.c: Add sanity argc check
If type mii command without arguments, we suffer from uninitialized argv[]
entries; for example we MIPS get stuck by TLB error.

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
2008-01-09 21:36:29 +01:00
Wolfgang Denk
3b93020d74 Merge branch 'master' of /home/wd/git/u-boot/master/ 2008-01-09 21:34:46 +01:00
Wolfgang Denk
6007f3251c Coding Style cleanup, update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-01-09 15:14:46 +01:00
Mike Frysinger
fc6414eca5 fix easylogo on big endian dev systems
didnt realize how out of shape easylogo actually was until i tried using it.
this patch does byte swapping as need be on the input tga header since the tga
is in little endian but the host could just as well be big endian.  i didnt
bother using bswap macros or such stuff from system headers as nothing in
POSIX dictates byte swapping functionality.

Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
2008-01-09 15:10:08 +01:00
Mike Frysinger
38d299c2db cleanup easylogo
- make the Makefile not suck
- include proper headers for prototypes
- fix obvious broken handling of strchr() when handling '.' in filenames

Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
2008-01-09 15:09:05 +01:00
raptorbrino@aim.com
883e3925d9 Fix build problems under Cygwin
This patch allows u-boot to build without error in a cygwin
environment.  Cygwin does not define __u64 in it's
include/asm/types.h file.  The -idirafter flag in the u-boot
build causes the inclusion of the cygwin types.h file as opposed
to u-bot/include/asm/types.h file which does define __u64.
Subsequently, sha1.c compile fails due to unknown symbol.

Signed-off-by: Brian Miller <raptorbrino@netscape.net>
2008-01-09 15:07:02 +01:00
Hans-Christian Egtvedt
43ef1c381f cmd_bmp: Add support for displaying gzip compressed bmps
The existing code can show information about a gzip compressed BMP
image, but can't actually display it.

Therefore, move the decompression code out of bmp_info() and use it in
bmp_display() as well in order to display a compressed BMP image.

Also, clean things up a bit and fix a memory leak while we're at it.

[hskinnemoen@atmel.com: a bit of refactoring]
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-01-09 14:55:18 +01:00
Guennadi Liakhovetski
d197ffd817 Fix and optimize MII operations on FEC (MPC8xx) controllers
This patch fixes several issues at least on a MPC885 based system with two
FEC interfaces used in MII mode.

1. PHY discovery should first read PHY_PHYIDR2 register and only then
   PHY_PHYIDR1 like cpu/mpc8xx/fec.c::mii_discover_phy() does it,
   otherwise the values read are wrong. Also notice, that PHY discovery
   cannot work on MPC88x / MPC87x in setups with both FECs active at all
   in its present form, because for both interfaces the registers from FEC
   1 are used to communicate over MII.

2. Remove code duplication for resetting the FEC by isolating it into a
   separate function.

3. Initialize MII on FEC 1 when communicating over FEC 2 in fec_init().

4. Optimize mii_init() to only reset the FEC 1 controller once.

5. Fix a typo in mii_init() using index i instead of j thus potentially
   leading to unpredictable results.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-01-09 14:52:04 +01:00
Guennadi Liakhovetski
6a5e1d75bf Fix endianness conversions in rtl8169 driver
It is unclear on what platforms this driver has been tested, since
noone up to now defines CONFIG_RTL8169 in the board configuration
header. Now it has been fixed for a big-endian mpc8241 based
linkstation platform. This patch presents the necessary endianness
conversion fixes.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-01-09 14:37:01 +01:00
Zhang Wei
58694f9709 Add Ctrl combo key support to usb keyboard driver.
Ctrl combo key support is added, which is very useful to input Ctrl-C
for interrupt current job.
Also add usb_event_poll() calling to usb_kbd_testc(), which can get
key input when tstc() is called.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Markus Klotzbuecher <mk@denx.de>
2008-01-09 13:58:39 +01:00
Markus Klotzbuecher
6a40ef62c4 Merge git://www.denx.de/git/u-boot
Conflicts:

	board/tqm5200/tqm5200.c
2008-01-09 13:57:10 +01:00
Wolfgang Denk
07eb02687f Coding Style clenaup; update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-01-09 13:43:38 +01:00
Matthias Fuchs
c26acc1a43 Remove bit swapping in Xilinx Spartan bitfile loading
This patch removes the unnecessary bit swapping when
booting .bit files with the 'fpga loadb' command.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2008-01-09 13:37:40 +01:00
Matthias Fuchs
437fc7327f Fix MSB check in Xilinx Spartan slave serial mode
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2008-01-09 13:37:08 +01:00
Matthias Fuchs
3bff4ffa33 Add new Xilinx Spartan FPGA types
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2008-01-09 13:36:28 +01:00
Matthias Fuchs
21d39d598c Add pre and post configuration callbacks for Spartan FPGAs
This patch adds a post configuration callback for Spartan2/3 FPGAs.
pre and post configuration callback are now optional and
not called when the function pointer is set to NULL.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2008-01-09 13:35:52 +01:00
Matthias Fuchs
0133502e39 Improve configuration of FPGA subsystem
This patch removes the FPGA subsystem configuration through
the CONFIG_FPGA bitmask configuration option.

See README for the new options:

	CONFIG_FPGA,
	CONFIG_FPGA_<vendor>,
	CONFIG_FPGA_<family>

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2008-01-09 13:34:20 +01:00
Matthias Fuchs
95c6bc7d4a Add Epson RX8025 RTC support
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2008-01-09 13:29:27 +01:00
Matthias Fuchs
1208a2dfde serial: Make default_serial_console() a weak function
With this patch it is possible to reimplement default_serial_console()
in board specific code. This will be done in the upcomming PMC440
U-Boot port. This also allows the lwmon board maintainer to
remove the '#if !defined(CONFIG_LWMON) ...' from common/serial.c.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2008-01-09 13:27:39 +01:00
Harald Welte
d16471ee05 add 'terminal program' functionality
This patch adds a 'cu' like serial terminal command to u-boot
using which you can access other serial ports from the system console.

OpenMoko uses this in their Neo1973 phones to get access to the GSM
Modem and GPS chip from the bootloader.

Signed-off-by: Harald Welte <laforge@openmoko.org>
2008-01-09 13:26:38 +01:00
Harald Welte
62d4f43653 Re-introduce the 'nand read.oob' and 'nand write.oob' commands
that used to exist with the legacy NAND code

Signed-off-by: Harald Welte <laforge@openmoko.org>
2008-01-09 13:23:50 +01:00
Harald Welte
f540c42d95 Fix building with CRAMFS but not JFFS2 support
Signed-off-by: Harald Welte <laforge@openmoko.org>
2008-01-09 13:04:37 +01:00
Jean-Christophe PLAGNIOL-VILLARD
23d0baf967 Allow CONFIG_AUTO_COMPLETE and command history CONFIG_CMDLINE_EDITING at the sametime
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-01-09 11:54:36 +01:00
Jean-Christophe PLAGNIOL-VILLARD
23776ff292 ARM: support board-specific ethernet PHY init
Add until the new phylib will be arrived

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-01-09 11:54:26 +01:00
Jean-Christophe PLAGNIOL-VILLARD
7b74ebe723 IXP: Add full baud-rate support for ixp42x, ixp45x and ixp46x
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-01-09 11:53:58 +01:00
Jean-Christophe PLAGNIOL-VILLARD
a2df4da31b Add missing file in gitignore and comments
based on Linux source tree's .gitignore files

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-01-09 11:53:45 +01:00
Wolfgang Denk
435dc8fcdb Coding Style cleanup, update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-01-09 11:36:21 +01:00
Wolfgang Denk
2eb6e01049 Merge branch 'master' of git://www.denx.de/git/u-boot-arm 2008-01-09 11:30:15 +01:00
Wolfgang Denk
d2ba6bd8f4 Merge branch 'master' of git://www.denx.de/git/u-boot-fdt 2008-01-09 11:28:56 +01:00
Wolfgang Denk
0b4f579230 Merge branch 'master' of git://www.denx.de/git/u-boot-mpc83xx 2008-01-09 11:27:02 +01:00
Wolfgang Denk
c1d1633409 Merge branch 'master' of /home/wd/git/u-boot/master/ 2008-01-09 11:17:59 +01:00
Stefan Roese
1466ef8db5 Merge branch 'lwmon5-no-ocm' 2008-01-09 10:43:47 +01:00
Stefan Roese
b2e2142c50 POST: Execute SPR test after relocation
On LWMON5 we now use d-cache as init-ram and stack. The SPR POST test uses
self modifying code and this doesn't work with stack in d-cache, since
I can't move the code from d-cache to i-cache. We move the SPR test to
be executed a little later, after relocation. Then stack is located in
SDRAM and this self-modifying code is no problem anymore.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-01-09 10:38:58 +01:00