Commit Graph

18638 Commits

Author SHA1 Message Date
Masahiro Yamada
b32aa9ebc5 linux/kernel.h: import DIV_ROUND_CLOSEST_ULL from Linux
Copied from Linux v4.20-rc7.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-29 11:38:36 +09:00
Masahiro Yamada
ce480791f7 ARM: uniphier: add CONFIG_PREBOOT
For more boot-flow flexibility,

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-29 11:38:35 +09:00
Masahiro Yamada
9f9edb6fe3 ARM: uniphier: allow to source boot script before distro-boot
Some users might need additional setups before booting the kernel.
If there is found a file 'boot.scr', run it before invoking the
distro boot command.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-29 11:38:34 +09:00
Masahiro Yamada
6bc50a8f69 ARM: uniphier: do not modify bootcmd environment variable at run-time
Some users might want to modify 'bootcmd' at compile-time by editing
include/configs/uniphier.h, but overwriting it at run-time makes it
impossible.

Instead, set 'bootdev' at run-time, which contains the boot device the
system is booting from, then indirectly reference it from 'bootcmd'.

It is up to users whether to override 'bootcmd'.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-29 11:38:33 +09:00
Weijie Gao
7d39b748ed mt7623: fix a typo in include/configs/mt7623.h
Fix typo: neede -> needed

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2018-12-26 21:35:53 -05:00
Adam Ford
a1702746df ARM: mach-omap2: omap3: Fix GPIO clocking in SPL
OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3
boards. At one point, the #ifdef's were replaced with
if CONFIG_IS_ENABLED but this won't work for people who need
OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't
used in Kconfig.  This patch moves the check to #if defined and
also makes Kconfig select the banks if CMD_GPIO is used which
makes the checks in the code less cumbersome.

Fixes: bd8a9c14c9 ("arm: mach-omap2/omap3/clock.c: Enable
all GPIO with CMD_GPIO")

Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
[trini: Migrate omap3_igep00x0.h]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-12-26 21:20:48 -05:00
Tom Rini
562a63e86b Merge git://git.denx.de/u-boot-marvell
- Fix breakage in helios4: Change U-Boot offset on SPI Flash
- Enable CONFIG_BLK for db-88f6820-amc
2018-12-21 13:38:09 -05:00
Tom Rini
5c676780e1 Merge branch 'master' of git://git.denx.de/u-boot-socfpga
- stratix10 updates
2018-12-21 13:37:34 -05:00
Tom Rini
fd0135e3c5 - mips: fix some DTC warnings
- bmips: bcm6348: add DMA driver
 - bmips: bcm5348: add ethernet driver
 - bmips: bcm6368: add ethernet driver
 - mips: mt76xx: fix DMA problems, disable CONFIG_OF_EMBED
 - mips: mscc: add support for Microsemi Ocelot and Luton SoCs
 - mips: mscc: add support for Ocelot and Luton evaluation boards
 - mips: jz47xx: add basic support for Ingenic JZ4780 SoC
 - mips: jz47xx: add support for Imgtec Creator CI20 board
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiQkHUH+J02LLC9InKPlOlyTyXBgFAlwaVJIACgkQKPlOlyTy
 XBio4hAAjMtmImAXdq087cNxz7X3bEruVlV1+TDeiarahmuOAKC9GNAdvt/YnCUF
 Plp3sL9a7ur3fh3ick5G7eLnAUMXTvuLoxyHYXJFSpIy090o7XPqa7kD+l2Gn+bN
 Y7UeCoIU81WD/2GRmDNyxM4JaY34Of010ozWKHfDobDBhPh4I+wVh3iVhEJJ7w9y
 dYb2UM2t1/wCgdzYZ49DNzbGop5B6wzYBdL3qlJIXvkuev/3mDuAFv+MrvRI3I/d
 CNPBg2VofwKtey3Bzanz2O0qYFA2oA9AsnELafNoppV72s1GhJD+c/mprqaQ+mmS
 tg51fU8por14ucUCBkLYXYfMtaJ6EYZ5e/tYX/1BRCWvx4aDq7HVE92/Dr/eRcOU
 9sXvnutEg5wTGePSj3N9as3D20q/3RzWTpyhvFQceQB6Dtp9qMayAsIGLwHjX6O/
 GmJZ7tiIlKIC/9s8L45b9+j87bBZ5Rv7FYrdNf4s+TejeNOH96EwnfpqiqdI0Soi
 MVk3CoP8iIEEDabZvv+Zqw4FdS6Ojqz9dZPoJN90UVd9dn+p0g3yZL4jQV/6GGyI
 gwYOE35yLA3KviVY3UUSHPPITlVG34+Qd66eXBomvHfCRwCWkEyxX3sKZK6Ni5JH
 MNs0APYrh1osqJokfT+8TtXB5TPwApBa5AkvFuag9NCzgXcX0Uo=
 =XGwv
 -----END PGP SIGNATURE-----

Merge tag 'mips-updates-for-2019.11' of git://git.denx.de/u-boot-mips

- mips: fix some DTC warnings
- bmips: bcm6348: add DMA driver
- bmips: bcm5348: add ethernet driver
- bmips: bcm6368: add ethernet driver
- mips: mt76xx: fix DMA problems, disable CONFIG_OF_EMBED
- mips: mscc: add support for Microsemi Ocelot and Luton SoCs
- mips: mscc: add support for Ocelot and Luton evaluation boards
- mips: jz47xx: add basic support for Ingenic JZ4780 SoC
- mips: jz47xx: add support for Imgtec Creator CI20 board
2018-12-21 13:36:51 -05:00
Aditya Prayoga
7a147220c6 arm: mvebu: configs: helios4: Change U-Boot offset on SPI Flash
SPI flash support on Helios4 [1] has been merge to u-boot/master on
commit 8cb8c0c6a8 ("Merge git://git.denx.de/u-boot-marvell")

However, the SPI image build failed after the merge with following
message:

COPY    spl/u-boot-spl.bin
MKIMAGE u-boot-spl.kwb
Error: Image header (incl. SPL image) too big!
header=0x20816 CONFIG_SYS_U_BOOT_OFFS=0x20000!
Increase CONFIG_SYS_U_BOOT_OFFS!
Error: Image header (incl. SPL image) too big!
header=0x20816 CONFIG_SYS_U_BOOT_OFFS=0x20000!
Increase CONFIG_SYS_U_BOOT_OFFS!
Could not create image
Makefile:1162: recipe for target 'u-boot-spl.kwb' failed
make: *** [u-boot-spl.kwb] Error 1

Let's increase the u-boot offset to 0x30000 to accommodate SPL changes
and leave some margin for future changes.

[1] https://patchwork.ozlabs.org/patch/1007762/

Signed-off-by: Aditya Prayoga <aditya@kobol.io>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-12-21 08:59:19 +01:00
Ang, Chee Hong
877ec6ebbd arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device table
Enable 'fpga' command in u-boot. User will be able to use the FPGA
command to program the FPGA on Stratix10 SoC.

Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
2018-12-20 17:12:25 +01:00
Ang, Chee Hong
c41e660b6b arm: socfpga: stratix10: Add Stratix 10 FPGA Reconfiguration Driver
Enable FPGA reconfiguration support for Stratix 10 SoC.

Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
2018-12-20 17:12:25 +01:00
Paul Burton
25c7de2255 mips: jz47xx: Add Creator CI20 platform
Add support for the Creator CI20 platform based on the JZ4780 SoC.

Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2018-12-19 15:23:02 +01:00
Paul Burton
cd71b1d5d2 mips: jz47xx: Add JZ4780 SoC support
Add initial support for the Ingenic JZ47xx MIPS SoC.

Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2018-12-19 15:23:01 +01:00
Gregory CLEMENT
6787c1ece0 MSCC: add board support for the Ocelots based evaluation boards
Adding the support for 2 boards sharing common code for Ocelot chip:
PCB120 and PCB123

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19 15:23:01 +01:00
Álvaro Fernández Rojas
93bd64bf05 bmips: bcm6318: add support for bcm6368-enet
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19 15:23:01 +01:00
Álvaro Fernández Rojas
55e55fe4a6 net: add support for bcm6348-enet
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-12-19 15:23:00 +01:00
Álvaro Fernández Rojas
6e0faa22dd bmips: bcm6318: add bcm6348-iudma support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19 15:23:00 +01:00
Álvaro Fernández Rojas
83eae02462 bmips: bcm63268: add bcm6348-iudma support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19 15:23:00 +01:00
Álvaro Fernández Rojas
b2bf5a2243 bmips: bcm6362: add bcm6348-iudma support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19 15:23:00 +01:00
Álvaro Fernández Rojas
85132221e2 bmips: bcm6328: add bcm6348-iudma support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19 15:23:00 +01:00
Álvaro Fernández Rojas
0417eb5590 bmips: bcm6368: add bcm6348-iudma support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19 15:23:00 +01:00
Álvaro Fernández Rojas
487250e6df bmips: bcm6358: add bcm6348-iudma support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19 15:23:00 +01:00
Álvaro Fernández Rojas
c225d6619e bmips: bcm6348: add bcm6348-iudma support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19 15:23:00 +01:00
Álvaro Fernández Rojas
9ab403d0dd bmips: bcm6338: add bcm6348-iudma support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2018-12-19 15:23:00 +01:00
Bin Meng
b859694776 dm: cpu: Add timebase frequency to the platdata
This adds a timebase_freq member to the 'struct cpu_platdata', to
hold the "timebase-frequency" value in the cpu or /cpus node.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
2018-12-18 09:56:26 +08:00
Sam Protsenko
528920f94e arm: ti: boot: Increase system partition size
Android code base is growing, so since Android "Pie" the size of
system.img grew up to be about 740 MiB. Let's increase system.img to
1 GiB to accommodate for those changes and leave some margin for future
changes. We don't want to make it more than 1 GiB, because we should
keep userdata partition big enough (for user files, like media etc.),
and eMMC size on BeagleBoard-X15 is only 3.5 GiB.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Praneeth Bajjuri <praneeth@ti.com>
2018-12-17 08:42:19 -05:00
Stefano Babic
24431adc36 Restore compatibility of image type IDs
Commit a2b96ece5b breaks the enumeration
of the Image Types. New image types can be appended, but they cannot be
inserted in the list else backward compatibility is broken.

This restores the images types as before 2018.11 and move i.MX8 related
images at the end.

Signed-off-by: Robert Berger <robert.berger@ReliableEmbeddedSystems.com>
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Tom Rini <trini@konsulko.com>
2018-12-17 07:09:29 -05:00
Tom Rini
d597b26d51 Improvements and fixes or u-boot-rockchip:
- new board: adds rv1108-elgin-r1 board support
 - rk3288-evb: dts: remove 'vmmc' from emmc node
 - rk3399-puma: dts: remove obsolete DTS node 'vcc5v0_host'
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJcFpKgAAoJECaAFcEOcohNoPoIAIsUwrwTbaB6/fDaXBoVXPmf
 8IQx6TjFKhs5930civVjnNVBR/19swAVoR8dR6JSGHgjv9C1k6zjEZfcKyi8Gr4J
 NORaNklExXqyBfHr+htHDgJ1OjmAImbNaVhbkGFtD/gELQ9LI1eFfNIDv26ZxDYH
 WKV/EQNbOxyDeOShCxn4GzGjqG0h0mvm/PlFH2s59b5SLAM8Ptg6B7ZRoe+go5fz
 l7nBl/TBG99lJtMpECMIpl3rqpU/JfYy2ONYVerX0w4ZshWjWJg6/m4pwWwLlUNn
 eJR1VsC5DZ6ocfQinFPU9xvjxAYXEy42Li82hFQg9KKs+4uchbKCLYrAiEQd6nk=
 =8Rly
 -----END PGP SIGNATURE-----

Merge tag 'for-master-20181216' of git://git.denx.de/u-boot-rockchip

Improvements and fixes or u-boot-rockchip:
- new board: adds rv1108-elgin-r1 board support
- rk3288-evb: dts: remove 'vmmc' from emmc node
- rk3399-puma: dts: remove obsolete DTS node 'vcc5v0_host'
2018-12-16 20:49:46 -05:00
Otavio Salvador
e11ef3d26e ARM: rockchip: Add rv1108-elgin-r1 board support
Add the initial support for Elgin R1 board, which is based on the
RV1108 SoC and has the following features currently supported in
U-Boot:

- UART
- eMMC
- USB

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-12-16 01:30:11 +01:00
Tom Rini
401c254044 Merge branch 'master' of git://git.denx.de/u-boot-usb
- Second half of the USB Gadget DM conversion
2018-12-15 17:49:57 -05:00
Igor Opaniuk
8b1312662b tee: change return code for REE FS supplicant cmd
If OP-TEE core is compiled with support of REE FS and RPMB
at the same time (CFG_RPMB_FS ?= y; CFG_RPMB_FS ?= y), and persistent
storage API is used with TEE_STORAGE_PRIVATE storage id, it will
lead to TA panic.

E/TC:? 0 TA panicked with code 0xffff0009
.....
E/TC:? 0 Call stack:
E/TC:? 0  0x000000004002f2f8 TEE_OpenPersistentObject at
lib/libutee/tee_api_objects.c:422

In this particular case TEE_ERROR_STORAGE_NOT_AVAILABLE is more suitable
than TEE_ERROR_NOT_IMPLEMENTED, as it provides to a TA a possibility
to handle this error code [1].

>From GPD TEE Internal Core specification [2]:
TEE_ERROR_STORAGE_NOT_AVAILABLE - if the persistent object is stored in a
storage area which is currently inaccessible. It may be associated with
the device but unplugged, busy, or inaccessible for some other reason.

[1]: 94db01ef44/lib/libutee/tee_api_objects.c (L419)
[2]: https://globalplatform.org/wp-content/uploads/2018/06/GPD_TEE_Internal_Core_API_Specification_v1.1.2.50_PublicReview.pdf

Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-12-15 11:49:19 -05:00
Jean-Jacques Hiblot
61602eaca2 configs: am335x_evm: Do not disable DM_USB in SPL
DM_USB is now supported in the SPL. Do not undef it
Besides to support DM_USB in SPL, one now has to use SPL_DM_USB

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-14 17:59:10 +01:00
Jean-Jacques Hiblot
7ff0528a73 configs: k2g_evm: Enable DFU on K2G EVM
The K2G evm uses the generic DWC3 driver. DFU can thus be enabled.
Enabling DFU for easier firmware update.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-14 17:59:09 +01:00
Jean-Jacques Hiblot
4dd76d0f96 usb: host: replace xhci-keystone driver by the generic dwc3 driver
The keystone platforms can use the generic DC3 driver. Removing the
keystone-spcecific xchi driver and add the configuration options to enable
the generic DWC3 driver on all K2 platforms.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-14 17:59:09 +01:00
Lukasz Majewski
916fa09799 usb: composite: Move bitmap related operations to ./include/linux/bitmap.h
The BITMAP related operations can now be moved to ./include/linux/bitmap.h
file to mimic the Linux kernel directory tree.

This change also allows to remove the lin_gadget_compat.h header file
(which is a legacy code only for composite U-boot layer).
It was also possible to remove #includes from several USB gadget drivers.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Stefan Agner <stefan.agner@toradex.com>
2018-12-14 17:59:08 +01:00
Simon Glass
f987177db9 dm: sound: Use the correct number of channels for sound
At present the 'beep' sound generates a waveform for only one channel even
if two are being used. This means that the beep is twice the frequency it
should be. Correct this by making it a parameter.

The fix in a previous commit was correct for sandbox but not for other
boards.

Fixes: 03f11e87a8 ("sound: Correct data output in sound_create_square_wave()")
Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-13 16:37:10 -07:00
Simon Glass
f2b25c9bf8 dm: sound: Complete migration to driver model
All users of sound are converted to use driver model. Drop the old code
and the CONFIG_DM_SOUND option.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-13 16:36:41 -07:00
Simon Glass
a1b17e4f4c dm: core: Add a function to read into a unsigned int
The current dev_read...() functions use s32 and u32 which are convenient
for device tree but not so useful for normal code, which often wants to
use normal integers for values.

Add a helper which supports returning an unsigned int. Also add signed
versions of the unsigned readers.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-13 16:32:49 -07:00
Simon Glass
d490189865 dm: sound: Create a uclass for sound
The sound driver pulls together the audio codec and i2s drivers in order
to actually make sounds. It supports setup() and play() methods. The
sound_find_codec_i2s() function allows locating the linked codec and i2s
devices. They can be referred to from uclass-private data.

Add a uclass and a test for sound.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-13 16:32:49 -07:00
Simon Glass
e96fa6c911 dm: sound: Create a uclass for i2s
The i2s bus is commonly used with audio codecs. It provides a way to
stream digital data sychronously in both directions. U-Boot only supports
audio output, so this uclass is very simple, with a single tx_data()
method.

Add a uclass and a test for i2s.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-13 16:32:49 -07:00
Simon Glass
ce6d99a056 dm: sound: Create a uclass for audio codecs
An audio codec provides a way to convert digital data to sound and vice
versa. Add a simple uclass which just supports setting the parameters for
the codec.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-13 16:32:49 -07:00
Simon Glass
45863db5a9 dm: sound: Rename samsung_i2s_priv to i2s_uc_priv
This structure contains information that is likely needed by any i2s
driver so it seems useful to attach it to the (forthcoming) i2c uclass.
For now, just rename it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-13 16:32:49 -07:00
Simon Glass
7153ad834f dm: sound: Drop codec_type
This field is not really used. It is always set to a known value. Drop it
to simplify the code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-13 16:32:49 -07:00
Simon Glass
ccf0425e32 dm: sound: samsung: Rename i2stx_info to samsung_i2s_priv
This struct is only used by the Samsung I2C driver and should move into
that driver. For now, rename it so it is clear that is driver-private
info.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-13 16:32:49 -07:00
Simon Glass
ee53494d0e dm: sound: Rename en_sound_codec to sound_codec
The en_ prefix is confusing and not needed. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-13 16:32:49 -07:00
Adam Ford
dda9af3ad1 am3517_evm: Use ttyS2 instead of ttyO2
The serial driver in the kernel moved from ttyOx to ttySx a while
ago.  This patch updates the console parameter to align with the
kernel change.

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-12-12 12:14:25 -05:00
Sumit Garg
03fb0958c9 qemu-arm: Add persistent environment support
Currently on qemu-arm platforms environment is kept in RAM. Instead
use pflash device 1 to provide persistent environment support across
device reset.

Also (optionally) provide support for persistent environment across
qemu machine OFF/ON using following instructions:

- Create envstore.img using qemu-img:
    qemu-img create -f raw envstore.img 64M
- Add a pflash drive parameter to the command line:
    -drive if=pflash,format=raw,index=1,file=envstore.img

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
2018-12-12 12:14:21 -05:00
Sumit Garg
5266db16ee qemu-arm: Enable VirtIO distro target
With -device virtio-blk-device,drive=hd0, it could detect distro boot
target.

Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Alexander Graf <agraf@suse.de>
2018-12-12 12:14:20 -05:00
Tom Rini
d94604d558 Add TFA boot flow for some Layerscape platforms
Add support for lx2160a SoC
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEorkTmaQ1QAtDiYw67UVZlNoLnbQFAlwOzFoACgkQ7UVZlNoL
 nbQUdQ//SRRBfjUe8RYTbojvTGQav0GTxnMkz4GFSrqu0nvGMW2YSlheOMqq72sg
 rK5mQqDvdkItCn+G8AZ5NV2ijkQ7NQWCfqL3EtApzTpv6qjfgv7xvopz8q4NZvzB
 Wp+4cFf9YQjNwhJ7kLvWHB7SBiz9AfMYRAj9cscH9xsGL3HxPj62WDfwyK/QXana
 KIxRKQ26/1AdOZy272yv70vlFj4IwForxV3ACimsWRuYcb8yre3pE0tD7XpMCSNv
 9GOfL7r4LS7U0+QnJoVeYLMhttRvOGJNUYtO2+ImO5NC3u9v8ehYEQ3FjGmM69CB
 vuPDQBDQc+Ap+Iu3k18PYSstp+mc9fbe9SQdlx6ARAecQqWTN4EOhf8s3m2bQq3S
 B58I0Zvowcdm8V2JKdXw94UqZX862U8PWH0BmcuX+4k+kRDwwU4XQY2nLp+Htz1w
 2q6vEdKGj7YUOaomx9fmKRL+9BFGoD+M9mTiHOwzqwxy6Pa9VkruSvMErM7p2l/z
 xI/Q+xPJhyk5TXgZRsz4Nat59WpifWruibKEd4PArQ446heHWmzLWjw/MWiFyd/H
 agCdpDZVJ8R7h1Krs+Ez8XjR1Qcg0gs+CdNBuvqxzOpMQGGonXA1nwi8YfHykhII
 urfoC8pew1yxiLGw7J2JSX808HV/09WCSEsrOOhE3T78rXTDlS4=
 =aT7d
 -----END PGP SIGNATURE-----

Merge tag 'fsl-qoriq-for-v2019.01-rc2' of git://git.denx.de/u-boot-fsl-qoriq

Add TFA boot flow for some Layerscape platforms
Add support for lx2160a SoC

[trini: Add a bunch of missing MAINTAINERS entries]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-12-10 17:19:59 -05:00