brain-hackers_pepepper-mirror
/
u-boot-brain
mirror of https://github.com/brain-hackers/u-boot-brain
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

MSCC: add board support for the Ocelots based evaluation boards 

Adding the support for 2 boards sharing common code for Ocelot chip:
PCB120 and PCB123

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
This commit is contained in:
Gregory CLEMENT 2018-12-14 16:16:49 +01:00 committed by Daniel Schwierzeck
parent 6bd8231a6d
commit 6787c1ece0
12 changed files with 510 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
MAINTAINERS
View File

@ -518,6 +518,11 @@ M: Lars Povlsen <lars.povlsen@microchip.com>
M: Horatiu Vultur <horatiu.vultur@microchip.com>
S: Maintained
F: arch/mips/mach-mscc/
F: arch/mips/dts/mscc*
F: arch/mips/dts/ocelot*
F: board/mscc/
F: configs/mscc*
F: include/configs/vcoreiii.h
MMC
M: Jaehoon Chung <jh80.chung@samsung.com>

152
arch/mips/dts/mscc,ocelot.dtsi Normal file
View File

@ -0,0 +1,152 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2018 Microsemi Corporation
*/
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mscc,ocelot";
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "mips,mips24KEc";
device_type = "cpu";
clocks = <&cpu_clk>;
reg = <0>;
};
};
aliases {
serial0 = &uart0;
};
cpuintc: interrupt-controller@0 {
#address-cells = <0>;
#interrupt-cells = <1>;
interrupt-controller;
compatible = "mti,cpu-interrupt-controller";
};
cpu_clk: cpu-clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <500000000>;
};
ahb_clk: ahb-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <250000000>;
};
ahb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x70000000 0x2000000>;
interrupt-parent = <&intc>;
cpu_ctrl: syscon@0 {
compatible = "mscc,ocelot-cpu-syscon", "syscon";
reg = <0x0 0x2c>;
};
intc: interrupt-controller@70 {
compatible = "mscc,ocelot-icpu-intr";
reg = <0x70 0x70>;
#interrupt-cells = <1>;
interrupt-controller;
interrupt-parent = <&cpuintc>;
interrupts = <2>;
};
uart0: serial@100000 {
pinctrl-0 = <&uart_pins>;
pinctrl-names = "default";
compatible = "ns16550a";
reg = <0x100000 0x20>;
interrupts = <6>;
clocks = <&ahb_clk>;
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
};
uart2: serial@100800 {
pinctrl-0 = <&uart2_pins>;
pinctrl-names = "default";
compatible = "ns16550a";
reg = <0x100800 0x20>;
interrupts = <7>;
clocks = <&ahb_clk>;
reg-io-width = <4>;
reg-shift = <2>;
status = "disabled";
};
spi0: spi-master@101000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dw-apb-ssi";
reg = <0x101000 0x40>;
num-chipselect = <4>;
bus-num = <0>;
reg-io-width = <4>;
reg-shift = <2>;
spi-max-frequency = <18000000>; /* input clock */
clocks = <&ahb_clk>;
status = "disabled";
};
reset@1070008 {
compatible = "mscc,ocelot-chip-reset";
reg = <0x1070008 0x4>;
};
gpio: pinctrl@1070034 {
compatible = "mscc,ocelot-pinctrl";
reg = <0x1070034 0x68>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&gpio 0 0 22>;
uart_pins: uart-pins {
pins = "GPIO_6", "GPIO_7";
function = "uart";
};
uart2_pins: uart2-pins {
pins = "GPIO_12", "GPIO_13";
function = "uart2";
};
spi_cs1_pin: spi-cs1-pin {
pins = "GPIO_8";
function = "si";
};
spi_cs2_pin: spi-cs2-pin {
pins = "GPIO_9";
function = "si";
};
spi_cs3_pin: spi-cs3-pin {
pins = "GPIO_16";
function = "si";
};
spi_cs4_pin: spi-cs4-pin {
pins = "GPIO_17";
function = "si";
};
};
};
};

42
arch/mips/dts/mscc,ocelot_pcb.dtsi Normal file
View File

@ -0,0 +1,42 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2018 Microsemi Corporation
*/
/dts-v1/;
#include "mscc,ocelot.dtsi"
/ {
compatible = "mscc,ocelot";
aliases {
spi0 = &spi0;
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&uart0 {
status = "okay";
};
&spi0 {
status = "okay";
pinctrl-0 = <&spi_cs1_pin>;
pinctrl-names = "default";
spi-flash@0 {
compatible = "spi-flash";
spi-max-frequency = <18000000>; /* input clock */
reg = <0>; /* CS0 */
};
spi-nand@1 {
compatible = "spi-nand";
spi-max-frequency = <18000000>; /* input clock */
reg = <1>; /* CS1 */
};
};

12
arch/mips/dts/ocelot_pcb120.dts Normal file
View File

@ -0,0 +1,12 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2018 Microsemi Corporation
*/
/dts-v1/;
#include "mscc,ocelot_pcb.dtsi"
/ {
model = "Ocelot PCB120 Reference Board";
compatible = "mscc,ocelot-pcb120", "mscc,ocelot";
};

12
arch/mips/dts/ocelot_pcb123.dts Normal file
View File

@ -0,0 +1,12 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2018 Microsemi Corporation
*/
/dts-v1/;
#include "mscc,ocelot_pcb.dtsi"
/ {
model = "Ocelot PCB123 Reference Board";
compatible = "mscc,ocelot-pcb123", "mscc,ocelot";
};

2
arch/mips/mach-mscc/Kconfig
View File

@ -79,4 +79,6 @@ config DDRTYPE_MT47H128M8HQ
endchoice
source "board/mscc/ocelot/Kconfig"
endmenu

14
board/mscc/ocelot/Kconfig Normal file
View File

@ -0,0 +1,14 @@
# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
config SYS_VENDOR
default "mscc"
if SOC_OCELOT
config SYS_BOARD
default "ocelot"
config SYS_CONFIG_NAME
default "ocelot"
endif

4
board/mscc/ocelot/Makefile Normal file
View File

@ -0,0 +1,4 @@
# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
obj-$(CONFIG_SOC_OCELOT) := ocelot.o

58
board/mscc/ocelot/ocelot.c Normal file
View File

@ -0,0 +1,58 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2018 Microsemi Corporation
*/
#include <common.h>
#include <asm/io.h>
#include <asm/addrspace.h>
#include <asm/types.h>
#include <environment.h>
#include <spi.h>
DECLARE_GLOBAL_DATA_PTR;
#define MSCC_GPIO_ALT0 0x54
#define MSCC_GPIO_ALT1 0x58
void external_cs_manage(struct udevice *dev, bool enable)
{
u32 cs = spi_chip_select(dev);
/* IF_SI0_OWNER, select the owner of the SI interface
* Encoding: 0: SI Slave
* 1: SI Boot Master
* 2: SI Master Controller
*/
if (!enable) {
writel(ICPU_SW_MODE_SW_PIN_CTRL_MODE |
ICPU_SW_MODE_SW_SPI_CS(BIT(cs)), BASE_CFG + ICPU_SW_MODE);
clrsetbits_le32(BASE_CFG + ICPU_GENERAL_CTRL,
ICPU_GENERAL_CTRL_IF_SI_OWNER_M,
ICPU_GENERAL_CTRL_IF_SI_OWNER(2));
} else {
writel(0, BASE_CFG + ICPU_SW_MODE);
clrsetbits_le32(BASE_CFG + ICPU_GENERAL_CTRL,
ICPU_GENERAL_CTRL_IF_SI_OWNER_M,
ICPU_GENERAL_CTRL_IF_SI_OWNER(1));
}
}
void board_debug_uart_init(void)
{
/* too early for the pinctrl driver, so configure the UART pins here */
setbits_le32(BASE_DEVCPU_GCB + MSCC_GPIO_ALT0, BIT(6) | BIT(7));
clrbits_le32(BASE_DEVCPU_GCB + MSCC_GPIO_ALT1, BIT(6) | BIT(7));
}
int board_early_init_r(void)
{
/* Prepare SPI controller to be used in master mode */
writel(0, BASE_CFG + ICPU_SW_MODE);
clrsetbits_le32(BASE_CFG + ICPU_GENERAL_CTRL,
ICPU_GENERAL_CTRL_IF_SI_OWNER_M,
ICPU_GENERAL_CTRL_IF_SI_OWNER(2));
/* Address of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE;
return 0;
}

67
configs/mscc_ocelot_defconfig Normal file
View File

@ -0,0 +1,67 @@
CONFIG_MIPS=y
CONFIG_SYS_TEXT_BASE=0x40000000
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_DEBUG_UART_BOARD_INIT=y
CONFIG_DEBUG_UART_BASE=0x70100000
CONFIG_DEBUG_UART_CLOCK=250000000
CONFIG_ARCH_MSCC=y
CONFIG_TARGET_OCELOT_PCB123=y
CONFIG_SYS_LITTLE_ENDIAN=y
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200"
CONFIG_LOGLEVEL=7
CONFIG_DISPLAY_CPUINFO=y
CONFIG_SYS_PROMPT="pcb123 # "
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_EXPORTENV is not set
# CONFIG_CMD_IMPORTENV is not set
# CONFIG_CMD_CRC32 is not set
CONFIG_CMD_MD5SUM=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_MTD=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_DHCP=y
# CONFIG_NET_TFTP_VARS is not set
# CONFIG_CMD_NFS is not set
CONFIG_CMD_PING=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nor0=spi_flash"
CONFIG_MTDPARTS_DEFAULT="mtdparts=spi_flash:512k(UBoot),256k(Env),256k(conf),15m(linux),15m(linux.bk)"
CONFIG_CMD_UBI=y
# CONFIG_CMD_UBIFS is not set
# CONFIG_ISO_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="ocelot_pcb123"
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_CLK=y
CONFIG_DM_GPIO=y
CONFIG_MTD=y
CONFIG_MTD_SPI_NAND=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_DM_ETH=y
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
CONFIG_DM_SERIAL=y
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_DESIGNWARE_SPI=y
CONFIG_LZMA=y

60
configs/mscc_ocelot_pcb120_defconfig Normal file
View File

@ -0,0 +1,60 @@
CONFIG_MIPS=y
CONFIG_SYS_TEXT_BASE=0x40000000
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_ARCH_MSCC=y
CONFIG_SYS_LITTLE_ENDIAN=y
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200"
CONFIG_LOGLEVEL=7
CONFIG_DISPLAY_CPUINFO=y
CONFIG_SYS_PROMPT="pcb120 # "
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_EXPORTENV is not set
# CONFIG_CMD_IMPORTENV is not set
# CONFIG_CMD_CRC32 is not set
CONFIG_CMD_MD5SUM=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_MTD=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_DHCP=y
# CONFIG_NET_TFTP_VARS is not set
# CONFIG_CMD_NFS is not set
CONFIG_CMD_PING=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nor0=spi_flash"
CONFIG_MTDPARTS_DEFAULT="mtdparts=spi_flash:512k(UBoot),256k(Env),256k(conf),15m(linux),15m(linux.bk)"
CONFIG_CMD_UBI=y
# CONFIG_CMD_UBIFS is not set
# CONFIG_ISO_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="ocelot_pcb120"
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_CLK=y
CONFIG_DM_GPIO=y
CONFIG_MTD=y
CONFIG_MTD_SPI_NAND=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_DM_ETH=y
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
CONFIG_DM_SERIAL=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_DESIGNWARE_SPI=y
CONFIG_LZMA=y

82
include/configs/vcoreiii.h Normal file
View File

@ -0,0 +1,82 @@
/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
/*
* Copyright (c) 2018 Microsemi Corporation
*/
#ifndef __VCOREIII_H
#define __VCOREIII_H
#include <linux/sizes.h>
/* Onboard devices */
#define CONFIG_SYS_MALLOC_LEN 0x100000
#define CONFIG_SYS_LOAD_ADDR 0x00100000
#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
#define CPU_CLOCK_RATE 500000000 /* Clock for the MIPS core */
#ifdef CONFIG_SOC_LUTON
#define CONFIG_SYS_MIPS_TIMER_FREQ 208333333
#else
#define CONFIG_SYS_MIPS_TIMER_FREQ (CPU_CLOCK_RATE / 2)
#endif
#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_MIPS_TIMER_FREQ
#if defined(CONFIG_ENV_IS_IN_SPI_FLASH) && !defined(CONFIG_ENV_OFFSET)
#define CONFIG_ENV_OFFSET (1024 * 1024)
#define CONFIG_ENV_SIZE (256 * 1024)
#define CONFIG_ENV_SECT_SIZE (256 * 1024)
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SPI_MAX_HZ 0 /* This force to read from DT */
#define CONFIG_ENV_SPI_MODE 0 /* This force to read from DT */
#endif
#define CONFIG_SYS_SDRAM_BASE 0x80000000
#if defined(CONFIG_DDRTYPE_H5TQ1G63BFA) || defined(CONFIG_DDRTYPE_MT47H128M8HQ)
#define CONFIG_SYS_SDRAM_SIZE (128 * SZ_1M)
#elif defined(CONFIG_DDRTYPE_MT41J128M16HA) || defined(CONFIG_DDRTYPE_MT41K128M16JT)
#define CONFIG_SYS_SDRAM_SIZE (256 * SZ_1M)
#elif defined(CONFIG_DDRTYPE_H5TQ4G63MFR) || defined(CONFIG_DDRTYPE_MT41K256M16)
#define CONFIG_SYS_SDRAM_SIZE (512 * SZ_1M)
#else
#error Unknown DDR size - please add!
#endif
#define CONFIG_CONS_INDEX 1
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - SZ_1M)
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_BOARD_EARLY_INIT_R
#if defined(CONFIG_MTDIDS_DEFAULT) && defined(CONFIG_MTDPARTS_DEFAULT)
#define VCOREIII_DEFAULT_MTD_ENV \
"mtdparts="CONFIG_MTDPARTS_DEFAULT"\0" \
"mtdids="CONFIG_MTDIDS_DEFAULT"\0"
#else
#define VCOREIII_DEFAULT_MTD_ENV /* Go away */
#endif
#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */
#define CONFIG_EXTRA_ENV_SETTINGS \
VCOREIII_DEFAULT_MTD_ENV \
"loadaddr=0x81000000\0" \
"spi_image_off=0x00100000\0" \
"console=ttyS0,115200\0" \
"setup=setenv bootargs console=${console} ${mtdparts}" \
"${bootargs_extra}\0" \
"spiboot=run setup; sf probe; sf read ${loadaddr}" \
"${spi_image_off} 0x600000; bootm ${loadaddr}\0" \
"ubootfile=u-boot.bin\0" \
"update=sf probe;mtdparts;dhcp ${loadaddr} ${ubootfile};" \
"sf erase UBoot 0x100000;" \
"sf write ${loadaddr} UBoot ${filesize}\0" \
"bootcmd=run spiboot\0" \
""
#endif /* __VCOREIII_H */