Commit Graph

49588 Commits

Author SHA1 Message Date
Marek Vasut
9a5483e9df ARM: rmobile: Add TPL support on R8A7791 M2 Porter
Add and enable TPL on M2 Porter. The TPL must fit into 16 kiB due
to the Gen2 BootROM restriction. The TPL is running from MERAM and
is capable of performing the initial initialization of PFC, Clock,
GPIO, LBSC, DBSC and QSPI NOR. DBSC is responsible for bringing up
the DDR DRAM access. The TPL is capable of loading the next stage,
U-Boot, from either SPI NOR or UART as a fallback. If either does
provide a valid U-Boot uImage, the system stops, which allows the
operator to load U-Boot ie. via JTAG and start it manually.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-11 23:11:55 +02:00
Marek Vasut
c670607331 ARM: rmobile: Do not init caches in TPL before DRAM
Skip the cache initialization, which can be done later on in U-Boot
proper, since this interferes with early DRAM initialization in TPL.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-11 23:11:54 +02:00
Marek Vasut
ce19d4ca7d ARM: rmobile: Split U-Boot and SPL sources on Porter
Pull the SPL code from porter.c into a separate file in
preparation for the addition of system initialization code.
No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-11 23:11:54 +02:00
Marek Vasut
d79dfd4519 spl: ram: Add TPL Kconfig symbols
Add TPL config symbols for RAM loading matching the SPL ones.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
2018-04-11 13:22:06 -04:00
Marek Vasut
49132610d1 spl: ram: Convert to CONFIG_IS_ENABLED
This patch is a preparation for adding TPL support for RAM loading.
CONFIG_IS_ENABLED allows for proper handling of the U-Boot/SPL/TPL
differences in config symbol names.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
2018-04-11 13:22:06 -04:00
Marek Vasut
a821a77aa7 ARM: Fix Makefile during SPL and TPL build
The tiny variants of memset and memcpy implementations can be
built for TPL as well, check whether a TPL build is in progress
and avoid including the default variants.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
2018-04-11 13:22:06 -04:00
Marek Vasut
a9d7990dc4 serial: Fix Makefile during SPL and TPL build
This patch fixes a situation where CONFIG_DM_SERIAL is enabled for
regular U-Boot and SPL, but not for TPL. In that case, the build
will try to include serial-uclass into the TPL nonetheless, because
CONFIG_DM_SERIAL is set.

The solution is to check if the build is for SPL or TPL and in that
case, check if CONFIG_$(SPL_TPL_)DM_SERIAL is also set. Only in that
case, include serial-uclass.c . If the build is for regular U-Boot,
CONFIG_BUILD is not set, so only check if CONFIG_DM_SERIAL is set
and if so, include serial-uclass.c

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
2018-04-11 13:22:05 -04:00
Marek Vasut
6ce3d67c70 tpl: ymodem: Add CONFIG_TPL_YMODEM_SUPPORT to Kconfig
Add Kconfig entry for CONFIG_TPL_YMODEM_SUPPORT symbol to match the SPL one.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
2018-04-11 13:22:05 -04:00
Marek Vasut
1e725e27eb tpl: spi: Add CONFIG_TPL_SPI_LOAD to Kconfig
Add Kconfig entry for CONFIG_TPL_SPI_LOAD symbol to match the SPL one.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
2018-04-11 13:22:05 -04:00
Marek Vasut
555004381e spl: spi: Move CONFIG_SPL_SPI_LOAD to Kconfig
Add Kconfig entry for CONFIG_SPL_SPI_LOAD symbol and move all
configurations using it to Kconfig.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
2018-04-11 13:22:00 -04:00
Tom Rini
c4446b1d6c Merge git://git.denx.de/u-boot-ubi 2018-04-11 10:05:41 -04:00
Bradley Bolen
05ea83b67e ubifs: Change value of mutex_is_locked()
The mutex lock and unlock functions are stubbed out and mutex_is_locked
was 0.  This caused asserts to fail in ubifs code when checking that the
mutex was locked.  For example,

UBIFS assert failed in ubifs_change_lp at 540
UBIFS assert failed in ubifs_release_lprops at 278

Assume that the "mutex" is locked since that is the normal case when it
is checked in the ubifs code.

Signed-off-by: Bradley Bolen <bradleybolen@gmail.com>
2018-04-11 11:27:07 +02:00
Heinrich Schuchardt
c398f2df7c checkpatch.pl: update from Linux kernel v4.16
Update scripts/checkpatch.pl from upstream.

One of the many corrections is not creating an error for cover-letters.

Reintroduce U-Boot's
5c761ce586
checkpatch.pl: Add warning for new __packed additions

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-04-10 15:19:15 -04:00
Kristian Amlie
8a0b827b1a fw_printenv: Fix crash due to incorrect size for malloc'ed string.
Using sizeof gives the size of the pointer only, not the string. This
could easily lead to crashes when using -l argument.

Signed-off-by: Kristian Amlie <kristian.amlie@northern.tech>
2018-04-10 15:19:15 -04:00
Heinrich Schuchardt
2f8ffb0655 get_maintainer.pl: update from Linux kernel v4.16
The most significant change is the addition of the --self-test option
which allows to run a consistency check on all MAINTAINERS files.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-04-10 15:19:14 -04:00
Heinrich Schuchardt
b57aaa07f2 MAINTAINERS: ARM STM STM32MP: correct file paths
Provide correct file paths.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-04-10 15:19:14 -04:00
Neil Armstrong
65388d0dc5 clk: add sandbox test for bulk API
This patch adds the bulk clock API tests for the sandbox test suite.

It's very similar to the main test but only uses the _bulk() API and
checks if the clocks are correctly enabled/disabled.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-10 15:18:56 -04:00
Neil Armstrong
a855be87da clk: Add get/enable/disable/release for a bulk of clocks
This patch adds a "bulk" API to the clock API in order to get/enable/disable
/release a group of clocks associated with a device.

This bulk API will avoid adding a copy of the same code to manage
a group of clocks in drivers.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-10 11:52:16 -04:00
Neil Armstrong
91f5f8b73c reset: add sandbox test for bulk API
This patch adds the bulk reset API tests for the sandbox test suite.

Unlike the main test, it also check the "other" reset signal using the bulk API
and checks if the resets are correctly asserted/deasserted.

To allow the bulk API to work, and avoid changing the DT, the number of resets
of the sandbox reset controller has been bumped to 101 for the "other" reset
line to be valid.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-10 11:52:16 -04:00
Neil Armstrong
0c28233903 reset: Add get/assert/deassert/release for bulk of reset signals
This patch adds a "bulk" API to the reset API in order to get/deassert/
assert/release a group of reset signals associated with a device.

This bulk API will avoid adding a copy of the same code to manage
a group of reset signals in drivers.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-10 11:52:16 -04:00
Simon Glass
b71ac16063 log: Add units to code-size stats in README.log
Without the units these numbers are confusing. Add a comment about the
unit being 'bytes' and mention 'buildman' as the source.

Suggested-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
2018-04-10 11:52:16 -04:00
Simon Glass
45fac9fc18 log: Correct missing free() on error in log_add_filter()
If there is a problem with the parameters to log_add_filter(), the memory
allocated is currently not freed. Fix this.

Reported-by: Coverity (CID: 171962)

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-04-10 11:52:16 -04:00
Guillaume GARDET
004d00914a mkimage: do not fail if there is no print_header function
Commit 253c60a breaks the exit value of 'mkimage -T rkimage'
and print the following  error:
  mkimage: Can't print header for Rockchip Boot Image support: Success

It is not a failure to not print headers, so just display the warning message,
and finish the function properly.

Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr>

Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-10 11:52:16 -04:00
Patrice Chotard
d409c96216 armv7m: disable icache before linux booting
Similarly to ARMV7, on ARMV7M instruction cache memory needs
to be disabled before running linux kernel to avoid kernel to
be stuck.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-04-10 11:52:16 -04:00
Neil Armstrong
e1e1e85203 serial: meson: Update compatible with new Linux bindings
The Amlogic Meson SoCs serial bindings were not written when serial
support was pushed into Linux and U-Boot.
A clean bindings document has been merged into Linux tree to correctly
handle the multiple clocks feeding the serial peripheral.
This update the U-Boot serial_meson driver with the new compatible
string for Amlogic Meson GX Socs.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-10 11:52:16 -04:00
Neil Armstrong
20367bb560 reset: Add Amlogic Meson Reset Controller
The Amlogic Meson SoCs embeds up to 256 reset lines, add the corresponding
driver.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-04-10 11:52:16 -04:00
Álvaro Fernández Rojas
060690663d sysreset: syscon: convert to use live dt
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-04-10 11:52:16 -04:00
Tom Rini
2600df4f8e Xilinx changes for v2018.05-rc2
- Various DT changes and sync with mainline kernel
 - Various defconfig updates
 - Add SPL init for zcu102 revA
 - Add new zynqmp boards zcu100/zcu104/zcu106/zcu111/zc12XX
   and zc1751-dc3
 - Net fixes - xlnx,phy-type
 - 64bit axi ethernet support
 - arasan: Fix nand write issue
 - fpga fixes
 - Maintainer file updates
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlrLeoUACgkQykllyylKDCEilwCgmdalBG7zVd9oekK142ILPdRf
 OgsAn2oWw69JhU3i4mv039lNgYpIzlRb
 =shae
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2018.05-rc2' of git://git.denx.de/u-boot-microblaze

Xilinx changes for v2018.05-rc2

- Various DT changes and sync with mainline kernel
- Various defconfig updates
- Add SPL init for zcu102 revA
- Add new zynqmp boards zcu100/zcu104/zcu106/zcu111/zc12XX
  and zc1751-dc3
- Net fixes - xlnx,phy-type
- 64bit axi ethernet support
- arasan: Fix nand write issue
- fpga fixes
- Maintainer file updates
2018-04-09 11:06:21 -04:00
Tom Rini
844fb498cc Patch queue for efi - 2018-04-09
Highlights this time around:
 
   - Lots of minor spec compliance fixes
   - Support full range of GOP BLT commands
   - More fine grained error checking
   - Network fixes (init, DP)
   - Lots of other bug fixes...
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJay2U6AAoJECszeR4D/txgE8UP/A5xHq707fv4CcQez/cZj/KE
 Twv4HoSY28by71VWS+SjXXTKkx+XGM/2tLzl6dQCB9V1aFUwtB12zu4mXpplfT8R
 K+dJU9PgkPKJzWRvn08JgeuXs1RQnfSgXz5J2pvSnJ4mySMlZKuVRGwHxw7DLFPf
 EZOqkd2+NI90fogGFoZ2l/aAzbDssBI45jDmH0KcPO49/+7XRVYJqpg0s7TQYmhY
 BeoJ0mAp12Ybpb4E7XDIGKKgCTjOGnftoRmzZyPZPfHPrmVWo2srmtycDbz0f/N0
 tEiXIOAo72DzmhL6aPPNJtt1mjXTGU2iavkV74JVqXODCd3bRJxz7TF6R30Nmvfz
 WMaKM+69Ahior9YJnGv2GUe8ebThxivWUUCB6HmfRh07sGCes6eV3HfklY5Fnglu
 Gw5pRl9+YBOywuUuyMg/yBPpPyA7b1HaTjwhsYWAB+q7htB6JkPhQruMxdiMaQnC
 gvOEoguW1XZo4MSudfC/SUOdayGp+KsQiEivi8gUh11uBPA2nj1Bh028Pj7tTET3
 J4C527uF/ivKwhx2hUHq2YkkgxHWz0Z98LFG3Xkj3q3fZFRwSEzugik1TswT8z3l
 qPxWgwX7Q9dxNYLW4ogvnlXU/09APRg9fVeaXxOfqJTHCCn9PHehbKKpkJ9g3cOt
 lPr1Q/4C5daK8dnxDzYo
 =fzbe
 -----END PGP SIGNATURE-----

Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot

Patch queue for efi - 2018-04-09

Highlights this time around:

  - Lots of minor spec compliance fixes
  - Support full range of GOP BLT commands
  - More fine grained error checking
  - Network fixes (init, DP)
  - Lots of other bug fixes...
2018-04-09 11:05:44 -04:00
Michal Simek
f190eaf002 arm64: zynqmp: Add support for Xilinx zcu111-revA
Xilinx zcu111 is a customer board. It is reusing some parts from zcu102.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:53 +02:00
Michal Simek
cf0bcd7d02 arm64: zynqmp: Add support for Xilinx zcu106-revA
Xilinx zcu106 is a customer board. It is reusing some parts from zcu102.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:52 +02:00
Michal Simek
f7c8e491e9 arm64: zynqmp: Add support for zcu104 customer board
Xilinx zcu104 is another customer board. It is sort of zcu102 clone with
some differences.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:52 +02:00
Michal Simek
85231c087e arm64: zynqmp: Add support for zc12xx boards
Add support for zc12xx boards. All of them are internal boards for
silicon validation and share very similar base platforms.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:52 +02:00
Michal Simek
10aaa3584b arm64: zynqmp: Add support for zc1751 dc3
zc1751 is based board with dc3 extenstion card which is used for silicon
validation.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:52 +02:00
Michal Simek
6d0340931e arm64: zynqmp: Add support for zcu100 aka Ultra96 board
Add support for Xilinx zcu100.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:52 +02:00
Michal Simek
949ec53c34 arm64: zynqmp: Get 200MHz clock early for MMC
SPL MMC boot requires to have clock early.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:52 +02:00
Michal Simek
704744f81b arm64: zynqmp: Remove pinctrl settings
This part hasn't been pushed to mainline yet that's why remove it.
The patch can be reverted in future when this is pushed there.

Reported-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
2018-04-09 12:14:52 +02:00
Michal Simek
aedd54739f arm64: zynqmp: Remove power domain description
This part hasn't been pushed to mainline yet that's why remove it.
The patch can be reverted in future when this is pushed there.

Reported-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
2018-04-09 12:14:52 +02:00
Michal Simek
8314bfe5c7 arm64: zynqmp: Add low level initialization for zc1751
Add psu init for zc1751 dc cards.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:51 +02:00
Michal Simek
979707baa9 arm64: zynqmp: Add low level initialization for zcu102-revA
Add psu init for zcu102-revA.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:51 +02:00
Michal Simek
cd1c2fa5f7 arm64: zynqmp: Enable Fixed link support
This patch enables the fixed link support for
all ZynqMP boards.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:51 +02:00
Michal Simek
4b148959da arm64: zynqmp: Enable mac address randomization for zc1751 dc5
There is no memory which stores mac address that's why generate it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:51 +02:00
Michal Simek
c7e36de6a7 arm64: zynqmp: Enable ethernet phys for zc1751 dc5
Enable ethernet phys for zc1751 dc5.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:51 +02:00
Luca Ceresoli
5e3cac50cc arm64: zynqmp: Enable booting to ATF
U-Boot is now able to boot to ARM Trusted Firmware (ATF). The boot
flow is SPL(EL3) loads ATF and full u-boot and jump to ATF(EL3) which
pass control to full u-boot(EL2). This has been tested on zcu106, so
enable it in this defconfig.

To generate an image that triggers this booting flow, you need to pass
'-O arm-trusted-firmware' to mkimage.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:51 +02:00
Michal Simek
1a82f59b31 arm64: zynqmp: Enable pxe and dhcp if commands are enabled
Targets without net can't use pxe or dhcp boot methods.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:51 +02:00
Siva Durga Prasad Paladugu
c643c491b9 net: phy: xilinx_phy: Read phytype using property xlnx,phy-type
This patch reads phytype from property "xlnx,phy-type" instead
od simply looking for "phy-type". This is to be inline with
Linux and also fixes the issue of detecting it wrongly in
u-boot.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-04-09 12:14:51 +02:00
Vipul Kumar
047f3bf828 axi: ethernet: Added support for 64 bit addressing for axi-ethernet
This patch uses writeq() function to enable greater than 32 bit
addressing of axi-ethernet for the ZynqMP devices.

Signed-off-by: Vipul Kumar <vipulk@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-04-09 12:14:50 +02:00
Vipul Kumar
6fbbe2d8f6 nand: arasan_nfc: Fixed NAND write issue
In commit 2453c69518 ("arm64: zynqmp: nand: Fixed NAND erase issue for
size 1GiB or more"), ARASAN_NAND_MEM_ADDR1_PAGE_MASK macro changed
to 0xFFFF and the same macro is used in nand write and so that getting
nand write error.
This patch reverted this macro to the 0xFFFF0000 and used
ARASAN_NAND_MEM_ADDR1_COL_MASK in the nand erase function
which is equal to 0xFFFF.

Signed-off-by: Vipul Kumar <vipulk@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:50 +02:00
Siva Durga Prasad Paladugu
71723aaec5 fpga: zynq: Add delay after PCFG_PROG_B change
There is delay needed after PCFG_PROGB change if
AES key source is efuse. This fixes the issue of
encrypted bitstream loading with AES efuse as key
source.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:50 +02:00
Siva Durga Prasad Paladugu
31bcb3444c fpga: zynqmp: Fix the nonsecure bitstream loading issue
Xilfpga library expects the size of bitstream in a pointer
but currenly we are passing the size as a value. This patch
fixes this issue.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Nava kishore Manne <navam@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 12:14:50 +02:00