axi: ethernet: Added support for 64 bit addressing for axi-ethernet

This patch uses writeq() function to enable greater than 32 bit
addressing of axi-ethernet for the ZynqMP devices.

Signed-off-by: Vipul Kumar <vipulk@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
This commit is contained in:
Vipul Kumar 2018-01-23 14:52:35 +05:30 committed by Michal Simek
parent 6fbbe2d8f6
commit 047f3bf828

View File

@ -78,9 +78,10 @@ static u8 rxframe[PKTSIZE_ALIGN] __attribute((aligned(DMAALIGN)));
struct axidma_reg {
u32 control; /* DMACR */
u32 status; /* DMASR */
u32 current; /* CURDESC */
u32 reserved;
u32 tail; /* TAILDESC */
u32 current; /* CURDESC low 32 bit */
u32 current_hi; /* CURDESC high 32 bit */
u32 tail; /* TAILDESC low 32 bit */
u32 tail_hi; /* TAILDESC high 32 bit */
};
/* Private driver structures */
@ -168,6 +169,22 @@ static inline int mdio_wait(struct axi_regs *regs)
return 0;
}
/**
* axienet_dma_write - Memory mapped Axi DMA register Buffer Descriptor write.
* @bd: pointer to BD descriptor structure
* @desc: Address offset of DMA descriptors
*
* This function writes the value into the corresponding Axi DMA register.
*/
static inline void axienet_dma_write(struct axidma_bd *bd, u32 *desc)
{
#if defined(CONFIG_PHYS_64BIT)
writeq(bd, desc);
#else
writel((u32)bd, desc);
#endif
}
static u32 phyread(struct axidma_priv *priv, u32 phyaddress, u32 registernum,
u16 *val)
{
@ -465,7 +482,7 @@ static int axiemac_start(struct udevice *dev)
writel(temp, &priv->dmarx->control);
/* Start DMA RX channel. Now it's ready to receive data.*/
writel((u32)&rx_bd, &priv->dmarx->current);
axienet_dma_write(&rx_bd, &priv->dmarx->current);
/* Setup the BD. */
memset(&rx_bd, 0, sizeof(rx_bd));
@ -485,7 +502,7 @@ static int axiemac_start(struct udevice *dev)
writel(temp, &priv->dmarx->control);
/* Rx BD is ready - start */
writel((u32)&rx_bd, &priv->dmarx->tail);
axienet_dma_write(&rx_bd, &priv->dmarx->tail);
/* Enable TX */
writel(XAE_TC_TX_MASK, &regs->tc);
@ -527,7 +544,7 @@ static int axiemac_send(struct udevice *dev, void *ptr, int len)
if (readl(&priv->dmatx->status) & XAXIDMA_HALTED_MASK) {
u32 temp;
writel((u32)&tx_bd, &priv->dmatx->current);
axienet_dma_write(&tx_bd, &priv->dmatx->current);
/* Start the hardware */
temp = readl(&priv->dmatx->control);
temp |= XAXIDMA_CR_RUNSTOP_MASK;
@ -535,7 +552,7 @@ static int axiemac_send(struct udevice *dev, void *ptr, int len)
}
/* Start transfer */
writel((u32)&tx_bd, &priv->dmatx->tail);
axienet_dma_write(&tx_bd, &priv->dmatx->tail);
/* Wait for transmission to complete */
debug("axiemac: Waiting for tx to be done\n");
@ -626,7 +643,7 @@ static int axiemac_free_pkt(struct udevice *dev, uchar *packet, int length)
flush_cache((u32)&rxframe, sizeof(rxframe));
/* Rx BD is ready - start again */
writel((u32)&rx_bd, &priv->dmarx->tail);
axienet_dma_write(&rx_bd, &priv->dmarx->tail);
debug("axiemac: RX completed, framelength = %d\n", length);