Murali Karicheri 32d858fc4f ARM: dts: k2g-ice: add dt node for netcp ... This patch adds dt node for DP83867 phy used on K2G ICE board and also enable netcp device nodes for the board. EVM hardware spec recommends to add 0.25 nsec delay in the tx direction and 2.25 nsec delay in the rx direction for internal delay in the clock path to be on the safer side. The board straps RX_DV/RX_CTRL pin of on board DP83867 phy in mode 1. Unfortunately, the phy data manual disallows this. Add ti,dp83867-rxctrl-strap-quirk in the phy node to allow software to enable workaround suggested for this incorrect strap setting. This ensures proper operation of this PHY. The dts bindings are kept in sync with that from 4.14.y linux kernel. This required the pinmux device related bindings to be commented out to allow for compilation. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>		2019-04-12 08:05:47 -04:00
..
cpu	armv8: Disable exception vectors in SPL by default	2019-03-22 12:15:03 -04:00
dts	ARM: dts: k2g-ice: add dt node for netcp	2019-04-12 08:05:47 -04:00
include	armv7: ls102xa: Add workaround for DDR erratum A-008850	2019-03-15 11:52:01 +05:30
lib	arm: lib: bootm: Push the Starting kernel print to the end	2019-03-22 08:35:50 -04:00
mach-aspeed	regmap: change regmap_init_mem() to take ofnode instead udevice	2018-05-07 15:49:51 -04:00
mach-at91	arm: at91: Add gardena-gateway-at91sam support	2019-04-09 09:28:50 +03:00
mach-bcm283x	arm: Kconfig: spelling fixes	2019-01-18 09:16:15 -05:00
mach-bcmstb	board: arm: Add support for Broadcom BCM7260	2018-09-10 21:19:31 -04:00
mach-davinci	driver: net: consolidate ti's code in separate folder	2018-11-05 10:41:59 -06:00
mach-exynos	exynos: replace CONFIG_ENV_SPI_BASE by CONFIG_SYS_SPI_BASE	2019-03-25 17:35:52 -04:00
mach-highbank	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
mach-imx	imx8qxp: Fix the reported CPU frequency	2019-03-13 09:14:35 +01:00
mach-integrator
mach-k3	arm: mach-k3: common: Clean up ATF image startup function	2019-02-09 07:51:02 -05:00
mach-keystone	ARM: k2g: add a workaround to reset the phy	2019-04-12 08:05:46 -04:00
mach-kirkwood	Convert CONFIG_ENV_SPI_* to Kconfig	2019-03-25 17:36:59 -04:00
mach-mediatek	mt7629: use linux kernel compatible SMP initialization	2018-12-26 21:35:53 -05:00
mach-meson	arm: meson: board-gx: Setup VPU in fdt	2019-01-31 09:35:01 +01:00
mach-mvebu	Convert CONFIG_ENV_SPI_* to Kconfig	2019-03-25 17:36:59 -04:00
mach-omap2	usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE	2019-02-15 22:01:15 +01:00
mach-orion5x	arm: remove prototype for get_timer_masked	2018-10-10 13:35:09 -04:00
mach-owl	board: Add uCRobotics Bubblegum-96 board support	2018-07-09 15:25:23 -04:00
mach-qemu	Kconfig: Sort bool, default, select and imply options	2018-07-30 07:18:48 -04:00
mach-rmobile	pinctrl: renesas: Add R8A77965 pin control tables	2019-04-09 18:19:10 +02:00
mach-rockchip	Revert "rockchip: Drop call to rockchip_dnl_mode_check() for now"	2019-03-29 09:21:13 +01:00
mach-s5pc1xx	exynos: Convert to use CONFIG_BLK	2019-02-09 12:50:21 -07:00
mach-snapdragon	arm: mach-snapdragon: pinctrl: clarify gpio disable bit	2019-01-25 12:12:56 -05:00
mach-socfpga	ARM: socfpga: Disable D cache in SPL	2019-03-09 17:59:13 +01:00
mach-sti
mach-stm32	mach-stm32: Set MPU SDRAM size to 512MB for STM32F7/H7	2018-10-06 14:09:41 -04:00
mach-stm32mp	arm: stm32mp1: deploy spl in root folder	2019-01-29 09:41:37 -05:00
mach-sunxi	arm: sunxi: Enable DM_MMC on required SoCs	2019-04-08 16:35:15 -04:00
mach-tegra	arm64: zynqmp: Move SoC sources to mach-zynqmp	2019-01-24 10:03:44 +01:00
mach-uniphier	ARM: uniphier: do not modify bootcmd environment variable at run-time	2018-12-29 11:38:33 +09:00
mach-versal	arm64: versal: Move IOU_SWITCH_DIVISOR0 to Kconfig	2019-02-14 14:31:10 +01:00
mach-versatile	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
mach-zynq	ARM: zynq: Remove addresses for i2c controllers	2019-02-14 14:31:10 +01:00
mach-zynqmp	arm64: zynqmp: Fix logic around CONFIG_ZYNQ_SDHCI	2019-02-14 14:31:10 +01:00
mach-zynqmp-r5	arm: zynqmp: Add ZynqMP minimal R5 support	2018-05-11 09:38:23 +02:00
thumb1/include/asm/proc-armv	SPDX: Convert a few files that were missed before	2018-05-10 20:38:35 -04:00
config.mk	efi_loader: Rename sections to allow for implicit data	2018-07-25 14:57:44 +02:00
Kconfig	arm: sunxi: Enable DM_MMC on required SoCs	2019-04-08 16:35:15 -04:00
Kconfig.debug
Makefile	arm: imx: build mach-imx for i.MX8	2019-01-28 20:35:47 +01:00