usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE

Since there is the SPL_USB_HOST_SUPPORT for enabling USB support in SPL,
makes more sense to rename the SPL_USB_SUPPORT as SPL_USB_STORAGE.
Everything that is not part of the usb storage support in SPL is now
build under SPL_USB_HOST_SUPPORT.

Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
This commit is contained in:
Abel Vesa 2019-02-01 16:40:07 +00:00 committed by Stefano Babic
parent 69280961d7
commit 79536013a3
8 changed files with 10 additions and 13 deletions

View File

@ -62,7 +62,7 @@
#define BOOT_DEVICE_CPGMAC 0x47
#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1
#ifdef CONFIG_SPL_USB_SUPPORT
#ifdef CONFIG_SPL_USB_STORAGE
#define MMC_BOOT_DEVICES_END BOOT_DEVICE_USB
#else
#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2

View File

@ -93,7 +93,7 @@ void save_omap_boot_params(void)
sys_boot_device = 1;
break;
#endif
#if defined(BOOT_DEVICE_USB) && !defined(CONFIG_SPL_USB_SUPPORT)
#if defined(BOOT_DEVICE_USB) && !defined(CONFIG_SPL_USB_STORAGE)
case BOOT_DEVICE_USB:
sys_boot_device = 1;
break;

View File

@ -75,8 +75,9 @@ obj-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o
obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o
ifdef CONFIG_SPL_USB_HOST_SUPPORT
obj-$(CONFIG_SPL_USB_SUPPORT) += usb.o usb_hub.o
obj-$(CONFIG_USB_STORAGE) += usb_storage.o
obj-y += usb.o
obj-y += usb_hub.o
obj-$(CONFIG_SPL_USB_STORAGE) += usb_storage.o
else
obj-$(CONFIG_USB_MUSB_HOST) += usb.o
endif

View File

@ -794,9 +794,9 @@ config SPL_USB_HOST_SUPPORT
device can be attached. This option enables the drivers in
drivers/usb/host as part of an SPL build.
config SPL_USB_SUPPORT
config SPL_USB_STORAGE
bool "Support loading from USB"
depends on SPL_USB_HOST_SUPPORT
depends on SPL_USB_HOST_SUPPORT && !(BLK && !DM_USB)
help
Enable support for USB devices in SPL. This allows use of USB
devices such as hard drives and flash drivers for loading U-Boot.

View File

@ -22,7 +22,7 @@ obj-$(CONFIG_$(SPL_TPL_)NET_SUPPORT) += spl_net.o
obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += spl_mmc.o
obj-$(CONFIG_$(SPL_TPL_)ATF) += spl_atf.o
obj-$(CONFIG_$(SPL_TPL_)OPTEE) += spl_optee.o
obj-$(CONFIG_$(SPL_TPL_)USB_SUPPORT) += spl_usb.o
obj-$(CONFIG_$(SPL_TPL_)USB_STORAGE) += spl_usb.o
obj-$(CONFIG_$(SPL_TPL_)FS_FAT) += spl_fat.o
obj-$(CONFIG_$(SPL_TPL_)FS_EXT4) += spl_ext.o
obj-$(CONFIG_$(SPL_TPL_)SATA_SUPPORT) += spl_sata.o

View File

@ -15,9 +15,7 @@
#include <usb.h>
#include <fat.h>
#ifdef CONFIG_USB_STORAGE
static int usb_stor_curr_dev = -1; /* current device */
#endif
static int spl_usb_load_image(struct spl_image_info *spl_image,
struct spl_boot_device *bootdev)
@ -34,13 +32,11 @@ static int spl_usb_load_image(struct spl_image_info *spl_image,
return err;
}
#ifdef CONFIG_USB_STORAGE
/* try to recognize storage devices immediately */
usb_stor_curr_dev = usb_stor_scan(1);
stor_dev = blk_get_devnum_by_type(IF_TYPE_USB, usb_stor_curr_dev);
if (!stor_dev)
return -ENODEV;
#endif
debug("boot mode - FAT\n");

View File

@ -14,7 +14,7 @@ CONFIG_VERSION_VARIABLE=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_USB_HOST_SUPPORT=y
CONFIG_SPL_USB_SUPPORT=y
CONFIG_SPL_USB_STORAGE=y
CONFIG_CMD_SPL=y
CONFIG_CMD_SPL_NAND_OFS=0x00100000
CONFIG_CMD_SPL_WRITE_SIZE=0x40000

View File

@ -24,7 +24,7 @@ CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_NET_SUPPORT=y
CONFIG_SPL_NET_VCI_STRING="AM43xx U-Boot SPL"
CONFIG_SPL_USB_HOST_SUPPORT=y
CONFIG_SPL_USB_SUPPORT=y
CONFIG_SPL_USB_STORAGE=y
CONFIG_SPL_USB_GADGET=y
CONFIG_SPL_USB_ETHER=y
# CONFIG_CMD_FLASH is not set