Commit Graph

57133 Commits

Author SHA1 Message Date
Philippe Reynes
fba802a1f5 bcm968580xref: remove CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT
This board define the flag CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT
but it's a mistake. It's a workaround for an issue in nand core.
This issue was fixed by the commit 5f626e7849 ("mtd: nand: raw:
Fix CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT behavior"). Now, this flag
break the nand on this board, so we simply remove it.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-05-18 12:31:59 -04:00
Philippe Reynes
ea1e9c04fd dt: bcm63158: watchdog should use a 50Mhz clock
The watchdog should use a clock at 50 Mhz, so
instead of using the clock osc (200 Mhz), we
define a reference clock at 50Mhz and use it
for both watchdog.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-05-18 12:31:59 -04:00
Philippe Reynes
a328ada441 dt: bcm6858: watchdog should use a 50Mhz clock
The watchdog should use a clock at 50 Mhz, so
instead of using the clock osc (200 Mhz), we
define a reference clock at 50Mhz and use it
for both watchdog.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-05-18 12:31:59 -04:00
Philippe Reynes
c411adbdd0 watchdog: bcm6345: callback start use tick instead of ms
The function bcm6345_wdt_start use the argument timeout
as tick but it should be used as milliseconds.

A clock is added as requirement for this driver.
The frequency of the clock is then used to convert the
millisecond to ticks in the function bcm6345_wdt_start.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2019-05-18 12:31:58 -04:00
Michal Simek
3eaf6dcd93 Makefile: Prioritize external dtb if defined
Prioritize external dtb if its passed via EXT_DTB
than the dtb that was built in the tree. With this
patch it appends the specified external dtb to
the u-boot image.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-05-18 12:31:58 -04:00
Trevor Woerner
1001502545 CONFIG_SPL_SYS_[DI]CACHE_OFF: add
While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-18 08:15:35 -04:00
Trevor Woerner
a0aba8a2eb CONFIG_SYS_[DI]CACHE_OFF: convert to Kconfig
CONFIG_SYS_[DI]CACHE_OFF had been partially converted to Kconfig
parameters; only for the ARC architecture. This patch turns these two
parameters into Kconfig items everywhere else they are found.

All of the include/configs/* and defconfig changes in this patch are
for arm machines only. The Kconfig changes for arc, nds32, riscv,
and xtensa have been included since these symbols are found in code
under arch/{arc,nds32,riscv,xtensa}, however, no currently-defined
include/configs/* or defconfigs for these architectures exist which
include these symbols.

These results have been confirmed with tools/moveconfig.py.

Acked-by: Alexey Brodkin <abrodkin@snopsys.com>
Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
[trini: Re-migrate for a few more boards]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-18 08:15:34 -04:00
Trevor Woerner
c5091c5fc6 CONFIG_SYS_[DI]CACHE_OFF: remove commented lines
Eventually these configuration items will be converted to Kconfig,
therefore there's little point in leaving commented-out versions of
them in include/configs.

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
2019-05-18 08:15:34 -04:00
Trevor Woerner
18592cc40b CONFIG_SYS_[DI]CACHE_OFF: remove superfluous "1"
This config is the only config that uses:
	#define CONFIG_SYS_DCACHE_OFF 1
in its #define.

Remove the superfluous "1" so this cache #define is like all the others.

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
2019-05-18 08:15:34 -04:00
Trevor Woerner
b7b4af0e35 CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case
According to De Morgan's Law[1]:
	!(A && B) = !A || !B
	!(A || B) = !A && !B

There are 5 places in the code where we find:
	#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
	#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
	!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
	"is the [DI]CACHE on?"
and the construct:
	defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
	"is the [DI]CACHE off?"

Therefore
	!(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
means:
	"the opposite of 'are they both off?'"
in other words:
	"are either or both on?"
and:
	(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
	"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A && B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner <trevor@toganlabs.com>
2019-05-18 08:15:34 -04:00
Tom Rini
98b3156b0d Merge branch 'master' of git://git.denx.de/u-boot-samsung
- arndale fixes
2019-05-16 07:09:59 -04:00
Tom Rini
b51d103cab Merge branch 'master' of git://git.denx.de/u-boot-socfpga
- SoCFPGA DT and reset cleanup, AE MCVEVK board support.
2019-05-16 07:09:33 -04:00
Tom Rini
9a32caf52d Merge branch 'master' of git://git.denx.de/u-boot-sh
- Align env position on GR-Peach with downstream U-Boot.
2019-05-16 07:09:18 -04:00
Krzysztof Kozlowski
f4b2ab97ed configs: arndale: Use appropriate driver for Asix AX88760
Arndale board has an Asix AX88760 USB 2.0 Hub and Fast Ethernet combo.
The appropriate driver for it is USB_ETHER_ASIX.

The mistake probably came from misinterpretation of commit e9954b867c
("usb: eth: add ASIX AX88179 DRIVER") which was tested on RECS5250 COM
module.  This module indeed has Exynos5250 and some similarities with
Arndale 5250 board but the USB/Ethernet chip used there is apparently
different.

Fixes: f58ad98a62 ("usb: net: migrate USB Ethernet adapters to Kconfig")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-05-16 16:11:42 +09:00
Krzysztof Kozlowski
bc85f7c87a arm: exynos: arndale: Remove unused CONFIG_DM_I2C_COMPAT
The CONFIG_DM_I2C_COMPAT was introduced in
include/configs/exynos5-common.h in commit 189d80166b ("exynos5:
enable dm i2c") and then it propagated up to configs/arndale_defconfig.
However since beginning the Arndale board (Exynos5250) was not using
I2C.

In fact, the Arndale board is not configuring its PMIC (S5M8767) which
uses I2C bus.  This setting can be thus safely removed to fix build
warning:

    This board uses CONFIG_DM_I2C_COMPAT. Please remove
    (possibly in a subsequent patch in your series)
    before sending patches to the mailing list.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-05-16 16:11:42 +09:00
Krzysztof Kozlowski
7d075055ac arm: exynos: arndale: Remove unused CONFIG_POWER and CONFIG_POWER_I2C
The CONFIG_POWER and CONFIG_POWER_I2C were introduced in
include/configs/exynos5-common.h in commit 19bd3aaa59 ("exynos5: fix
build break by adding CONFIG_POWER") and then it propagated up to
include/configs/arndale.h.  However before that commit, there was no
build break at all on Arndale and SMDK5250 boards.  It seems the commit
fixed nothing and just added unused defines.

In fact, the Arndale board is not configuring its PMIC (S5M8767) which
uses I2C bus.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-05-16 16:11:42 +09:00
Tom Rini
5b4b680cfe Prepare v2019.07-rc2
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-15 15:58:48 -04:00
Tom Rini
1da6006679 Merge branch 'master' of git://git.denx.de/u-boot-net
- micrel, ti PHY fixes
- rtl8169, mtk-eth fixes
2019-05-15 07:10:52 -04:00
Tom Rini
8b1d3d19be STM32 MCUs update:
_ Add MPU region for SPI NOR memory mapped region
 _ Add missing QSPI flash compatible for STM32 F7 boards
 _ Update spi-tx-bus-width and spi-rx-bus-width properties
 _ Add QSPI support for STM32F469 Discovery board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJc2tW5AAoJEMrHeC97M/+mNuAQAKLWXsT1OUS23DZFXUPsIAYI
 jIMGmrtVPb0KxK8YZfoTYebAUkE604FoKYNuo59SGBCw0ckunzWd9eLjwysdMY0X
 +kg12ynyPu+XSc4ffTYoGB7JkPH8xqaOzUDMnio730Wa9HGqBQQkK5c5Cx1cYXY2
 22pUE7ozeoGFiYqhcXtAKlfXPYW1AqF5HNXN0subLt8V+oT9RTINpYbYtwEcECRF
 ZKa/OerzVXtrzA14uRm7adzLsJNlonjJIhRphCcF+zConlTST73uHFNFuB4quR50
 5p03BzFW0yylgxXkZL+3qoyYmfi5fLHm3nxBs5AlQR+i7Deqo73CCjOLTuOgHTM5
 ePFHpZ11ivRgNz9bz0El5TpYXtRcyck6EdrE6JfqPYjk1kRJhtolqbPtyM8v25Rg
 PQHiqsEYwfr0jhpcyJiiMaZHifcB5TFXmPpkBH9BSWY9vJ49ONCB4THn68JBo5NQ
 vAFhvFZCKDtYiW0h5q3OorUbCduoIkbouvO1FS0Ml2qh1Fve++rl4fQq2snIdb8j
 l0Fw2KQkfXOZ24hcXF09zqdtZ81qjAswkMhEkryh0mvp+iKQeWDtGgH18y2BTuNV
 +Aw1yiT5Gu2+0IaHEhuKI2Ygj4/1/MBnQVhGvC0vLsUgRHDk6F7wAjqA+Dd5XsPm
 tg8hUwgtuXlSl/Ql+6C7
 =1cOA
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-mcu-20190514' of https://github.com/pchotard/u-boot

STM32 MCUs update:
_ Add MPU region for SPI NOR memory mapped region
_ Add missing QSPI flash compatible for STM32 F7 boards
_ Update spi-tx-bus-width and spi-rx-bus-width properties
_ Add QSPI support for STM32F469 Discovery board
2019-05-15 07:10:32 -04:00
Weijie Gao
ebb97ea868 eth: mtk-eth: fix incorrect read of phy-handle
In mt7629-rfb.dts, the phy-handle is a reference to the node phy0, not the
node itself:

	phy-handle = <&phy0>;

	phy0: ethernet-phy@0 {
		reg = <0>;
	}

However the driver used ofnode_find_subnode("phy-handle") to read the node.
It will always fail.

This patch replaces ofnode_find_subnode with dev_read_phandle_with_args to
make sure the node can be read correctly.

Cc: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-14 14:43:33 -05:00
Thierry Reding
cdd69acc2c net: rtl8169: Support RTL-8168h/8111h
This version of the RTL-8168 is present on some development boards and
is compatible with this driver. Add support for identifying this version
of the chip so that U-Boot won't complain about it being unknown.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-14 14:43:33 -05:00
Thierry Reding
b6054b5351 net: rtl8169: Implement ->hwaddr_write() callback
Implement this callback that allows the MAC address to be set for the
Ethernet card. This is necessary in order for the device to be able to
receive packets for the MAC address that U-Boot advertises.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-14 14:43:33 -05:00
Michal Simek
6845b368f1 phy: ti: Init node before reading
There is a need to fill node before clk_output_sel is setup.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Reviewed-by: <hannes.schmelzer@br-automation.com>
2019-05-14 14:43:33 -05:00
James Byrne
77b508d34b net: phy: micrel: Allow KSZ8xxx and KSZ90x1 to be used together
Commit d397f7c45b ("net: phy: micrel: Separate KSZ9000 drivers from
KSZ8000 drivers") separated the KSZ8xxx and KSZ90x1 drivers and warns
that you shouldn't select both of them due to a device ID clash between
the KSZ9021 and the KS8721, asserting that "it is highly unlikely for a
system to contain both a KSZ8000 and a KSZ9000 PHY". Unfortunately
boards like the SAMA5D3xEK do contain both types of PHY, but fortunately
the Linux Micrel PHY driver provides a solution by using different PHY
ID and mask values to distinguish these chips.

This commit contains the following changes:

- The PHY ID and mask values for the KSZ9021 and the KS8721 now match
those used by the Linux driver.
- The warnings about not enabling both drivers have been removed.
- The description for PHY_MICREL_KSZ8XXX has been corrected (these are
10/100 PHYs, not GbE PHYs).
- PHY_MICREL_KSZ9021 and PHY_MICREL_KSZ9031 no longer select PHY_GIGE
since this is selected by PHY_MICREL_KSZ90X1.
- All of the relevant defconfig files have been updated now that
PHY_MICREL_KSZ8XXX does not default to 'Y'.

Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-05-14 14:43:33 -05:00
Marek Vasut
9e6ed1a346 ARM: dts: socfpga: Keep FPGA bridge entries in SPL DT
Keep the FPGA bridge entries in SPL DT to let do_bridge_reset() toggle
the bridges on/off as needed according to the handoff file.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Cc: Tien Fong Chee <tien.fong.chee@intel.com>
2019-05-14 19:53:16 +02:00
Marek Vasut
917bd8a876 ARM: dts: socfpga: Factor out U-Boot specifics from A10 handoff files
Pull out the u-boot,dm-pre-reloc from socfpga_arria10_socdk_sdmmc_handoff.dtsi
into separate dtsi header file to make it easier to patch in custom handoff
dtsi files, without having to manually add the U-Boot bits. Shuffle the include
clauses in the A10 DT files to make it obvious what gets included where without
having to follow confusing long chain of includes, i.e. board DT file includes
everything it needs.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Cc: Tien Fong Chee <tien.fong.chee@intel.com>
2019-05-14 19:53:16 +02:00
Wolfgang Grandegger
990ed4452c arm: socfpga: Re-add support for Aries MCV SoM and MCVEV[KP] board
Re-add support for Aries Embedded MCV SoM, which is CycloneV based
and the associated MCVEVK and MCVEVP baseboard. The board can boot
from eMMC. Ethernet and USB is supported.

The Aries Embedded boards have been removed with commit 03b54997d5
("board/aries: Remove"). I will now take care of them.

The device-tree files are from mainline Linux commit e93c9c99a629
("Linux v5.1)".

Signed-off-by: Wolfgang Grandegger <wg@aries-embedded.de>
CC: Marek Vasut <marex@denx.de>
CC: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-05-14 19:52:39 +02:00
Simon Goldschmidt
48ec73453a arm: sofcpga: s10: remove unused ad-hoc reset code
The stratix 10 reset manager ad-hoc code in arch/arm contains an unused
function 'reset_deassert_peripherals_handoff' that has been added from
the beginning. As this is probably a result of copying the gen5 reset
manager and this function has never been used, remove it.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-05-14 19:52:39 +02:00
Simon Goldschmidt
430b42f76a arm: socfpga: remove re-added ad-hoc reset code
commit c5de2b7eae ("arm: socfpga: implement proper peripheral reset")
has removed the call to 'reset_deassert_peripherals_handoff()' from
socfpga gen5 SPL since the reset driver now handles resets. However,
commit c1d4b464c8 ("ARM: socfpga: Disable bridges in SPL unless booting from FPGA")
has re-added this ad-hoc reset code, so that all peripherals were now
again enabled instead of letting the drivers enable them by request.

While at it, remove this function for gen5 as it should not be used.

Fixes: commit c1d4b464c8 ("ARM: socfpga: Disable bridges in SPL unless booting from FPGA")
Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-05-14 19:52:38 +02:00
Marek Vasut
851224460f ARM: renesas: grpeach: Align env position
Move the U-Boot environment to 0x80000 to match the downstream
vendor fork and allow easy migration from one to the other.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-14 19:52:04 +02:00
Tom Rini
90176e3be6 Pull request for UEFI sub-system for v2019.07-rc3
The development target for the UEFI sub-system is EBBR compliance. We have
 already implemented some further protocols to enable running the UEFI Shell
 and the UEFI SCT test suite.
 
 As some boards are severely memory constrained make some of these extras
 customizable.
 
 Provide bug fixes. The most prominent ones let us pass the UEFI SCT memory
 allocation tests.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAlzYbDUACgkQxIHbvCwF
 GsRpEg//V9SEEjVe2GDGdghFkCzdPHxsWLTGSifqkCNTr8AEDmHvc9nxTy8U3OXx
 kuUxrWczVr2X1FhFsouxOKldIQEMDIVu3EcD1vBPV6ec8w44nrB+xgoAqM9ExZFV
 GLQioJpj9tsmWFTkX5caHFdlN+NyWaY5D59DctcyB5qEFrq5NXol89tXd99eineZ
 3/W5M/Ju4XwmR+MPhyMkT1lrHOJSsAl1cf/DUUDPeOdSLDhOdMsJTFI56arw7HKy
 kZ1aa7nLHhwdhTYCQRnKwfDUsXfvo7R2+JrK2jXkmqrPv8736OxOIEMKCSOE36jN
 2jRfN3wkxPsocoyHaqbkb+cwPcjdLkM4bT9uVjROmPyPdjNO07cVzEzxPOXvtC++
 Yw+eHAoStPaZ/5FRdH1zfEoXdFIo0oYqFLm/2ZPlx77c4ek+byBdQDFG1VzGXUOE
 XVwL5IuURxZlJOGEBZpGZHxC/75PDxjSgGP5tQisHep/nlfZn0y9+bXLwhJ+O+OK
 Dml9FLJ0Xml+Axf2CcnOofWfXOSdRPiG/i+m7CfdjneigzptC4xH1cTvOrllqa6n
 +ZqwjZcc9jWOQSSa+QL6RWWZvi/YjDqWEtkR6fhSi/ET43KBdvnDM9kZBBe3R52C
 w6rTfCYEsFyl/cxXGpG14u3/44euqzjKjuQYrAxojuFLzXdkd9k=
 =9smC
 -----END PGP SIGNATURE-----

Merge tag 'efi-2019-07-rc3' of git://git.denx.de/u-boot-efi

Pull request for UEFI sub-system for v2019.07-rc3

The development target for the UEFI sub-system is EBBR compliance. We have
already implemented some further protocols to enable running the UEFI Shell
and the UEFI SCT test suite.

As some boards are severely memory constrained make some of these extras
customizable.

Provide bug fixes. The most prominent ones let us pass the UEFI SCT memory
allocation tests.
2019-05-13 07:13:28 -04:00
Tom Rini
d2d8f73da4 Merge branch 'master' of git://git.denx.de/u-boot-socfpga
- A10 FPGA programming support, Gen5 livetree conversion
2019-05-13 07:13:03 -04:00
Tom Rini
592254b9b8 Merge branch 'master' of git://git.denx.de/u-boot-sh
- SH2, SH3 removal
2019-05-13 07:12:47 -04:00
Heinrich Schuchardt
e2d82f8b2a efi_loader: comments for efi_install_fdt()
Describe that efi_install_fdt() defaults to using the device tree
indicated by environment variable fdtcontroladdr.

ACPI tables and device trees are mutually exclusive.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-12 20:54:23 +02:00
Heinrich Schuchardt
7e92db810b efi_loader: deduplicate code in cmd/bootefi.c
Move duplicate initialization code to single instance.

Adjust comments of concerned functions.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-12 20:54:23 +02:00
Heinrich Schuchardt
05fefe7681 efi_loader: ACPI device node to text
The device path to text protocol renders ACPI device nodes incorrectly.

Use capital hexadecimal numbers as shown in the UEFI spec examples.

Always output the optional UID. This matches what UEFI SCT expects and
saves us an `if`.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-12 20:54:22 +02:00
Heinrich Schuchardt
3b985113be efi_loader: infinite recursion notifying events
UEFI SCT uses this call sequence to determine the current TPL level inside
notification functions:

    OldTpl = BS->RaiseTPL(TPL_HIGH_LEVEL);
    BS->RestoreTPL(OldTpl);

In RestoreTPL() we trigger the notification function of queued events. If
we do not mark the event as non-queued before calling the notification
function, this results in an infinite recursive call sequence.

Mark the event as non-queued before entering the notification function.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-12 20:54:22 +02:00
Heinrich Schuchardt
8ae39857b9 efi_loader: simplify efi_allocate_pages()
Replace unnecessary control structures by using return statements.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-12 20:54:22 +02:00
Heinrich Schuchardt
f756fe83b0 efi_loader: AllocateAdress error handling
If AllocatePages() is called with AllocateAddress, the UEFI spec requires
to return EFI_NOT_FOUND in case the memory page does not exist.

The UEFI SCT II 2017 spec additionally requires to return EFI_NOT_FOUND if
the page is already allocated.

Check that *Memory refers to an unallocated page.

UEFI SCT II (2017): AllocatePages(), 5.1.2.1.9 - 5.1.2.1.10

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-12 20:54:22 +02:00
Heinrich Schuchardt
735fd22800 efi_loader: out of resources in AllocatePages()
According to the UEFI AllocatePages() has to return EFI_OUT_OF_RESOURCES if
sufficient memory is not available.

Change the return value.

UEFI SCT II (2017): 3.2.1 AllocatePages(), 5.1.2.1.8

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-12 20:54:22 +02:00
Heinrich Schuchardt
7d3af58ed9 efi_loader: check memory address before freeing
When we call FreePages() we essentially add memory to our memory map. We
shouldn't do this for memory that does not exit.

Check if the memory that is to be freed via FreePages() or FreePool() is in
our memory map and is not EFI_CONVENTIONAL_MEMORY.

This check is mandated by the UEFI specification.

Cf. UEFI SCT  II (2017), 3.2.2 FreePages(), 5.1.2.1 - 5.1.2.2

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-12 20:54:22 +02:00
Heinrich Schuchardt
96aa99cded efi_loader: error code in UninstallProtocolInterface()
According to the UEFI specification UninstallProtocolInteface() has to
return EFI_NOT_FOUND if the interface is not found.

Correct the return value.

Cf. UEFI SCT II spec (2017), 3.3.2 UninstallProtocolInterface(), 5.1.3.2.4

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-12 20:54:22 +02:00
Heinrich Schuchardt
61c63db7fe efi_loader: superfluous check in efi_remove_protocol()
efi_search_protocol() already checks that the GUID matches. Don't check
a second time.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-12 20:54:22 +02:00
Heinrich Schuchardt
ab557141c2 efi_loader: LocateDevicePath() incorrect parameter check
A parameter check in LocateDevicePath() does not match the requirements of
the UEFI spec.

If device is NULL, only return EFI_INVALID_PARAMETER if a matching handle
is found.

Cf. UEFI SCT II specification (2017)3.3.7 LocateDevicePath(), 5.1.3.7.3

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-12 20:54:22 +02:00
Heinrich Schuchardt
0a84319665 efi_loader: fix typo in efi_locate_handle() comment
%s/not buffer/no buffer/

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-12 20:54:22 +02:00
Heinrich Schuchardt
64b5ba4d29 efi_loader: make device path to text protocol customizable
The device path to text protocol is not needed for EBBR compliance. So
let's make it a customizable option.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-12 20:54:22 +02:00
Heinrich Schuchardt
334997356e efi_loader: make Unicode collation protocol customizable
The Unicode collation protocol is not needed for EBBR compliance. So let's
make it a customizable option.

The Unicode capitalization table is only needed by this protocol. So let it
depend on the Unicode collation protocol.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-12 20:54:22 +02:00
Heinrich Schuchardt
9363fd22df efi_loader: reword the EFI_LOADER config option
No need to mention U-Boot in brief description.
Fix several typos, mention iPXE.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-12 20:54:22 +02:00
Heinrich Schuchardt
5684c8d1ea efi_loader: format Kconfig
Use if/endif for dependencies to give structure to the configuration menu.

Sort important settings to the top.

Abbreviate the short description of EFI_LOADER_HII.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-12 20:54:22 +02:00
Heinrich Schuchardt
5ad3877448 efi_loader: observe CONFIG_EFI_LOADER_HII
If EFI_LOADER_HII is not set, do not unnecessarily compile files for HII
protocols.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-12 20:54:22 +02:00