Commit Graph

69071 Commits

Author SHA1 Message Date
Sean Anderson
f51e5ec4d7 test: Add tests for LOGFF_DENY
This adds some tests for log filters which deny if they match.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-30 10:55:26 -04:00
Sean Anderson
046b8c0650 test: log: Give tests names instead of numbers
Now that the log test command is no more, we can give the log tests proper
names.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-10-30 10:55:26 -04:00
Sean Anderson
62ef81891d test: log: Convert log_test from python to C
When rebasing this series I had to renumber all my log tests because
someone made another log test in the meantime. This involved updaing a
number in several places (C and python), and it wasn't checked by the
compiler. So I though "how hard could it be to just rewrite in C?" And
though it wasn't hard, it *was* tedious. Tests are numbered the same as
before to allow for easier review.

A note that if a test fails, everything after it will probably also fail.
This is because that test won't clean up its filters.  There's no easy way
to do the cleanup, except perhaps removing all filters in a wrapper
function.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-10-30 10:55:26 -04:00
Sean Anderson
fe3b1a2d21 log: Add filter flag to deny on match
Without this flag, log filters can only explicitly accept messages.
Allowing denial makes it easier to filter certain subsystems. Unlike
allow-ing filters, deny-ing filters are added to the beginning of the
filter list. This should do the Right Thing most of the time, but it's
less-universal than allowing filters to be inserted anywhere. If this
becomes a problem, then perhaps log_filter_add* should take a filter number
to insert before/after.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-30 10:55:26 -04:00
Sean Anderson
a02f84ee9c log: Add function to create a filter with flags
This function exposes a way to specify flags when creating a filter.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-30 10:55:26 -04:00
Sean Anderson
3102c1d2c2 log: Expose some helper functions
These functions are required by "cmd: log: Add commands to manipulate
filters" and "test: Add a test for log filter-*".

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-30 10:55:26 -04:00
Sean Anderson
c3a5459985 log: Use CONFIG_IS_ENABLED() for LOG_TEST
Checkpatch complains about using #ifdef for CONFIG variables.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-30 10:55:26 -04:00
Sean Anderson
43381401d5 log: Add additional const qualifier to arrays
Both these arrays and their members are const. Fixes checkpatch complaint.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-30 10:55:26 -04:00
Sean Anderson
b66a924f97 log: Fix incorrect documentation of log_filter.cat_list
Logging category lists are terminated by LOGC_END, not LOGC_NONE.

Fixes: e9c8d49d54 ("log: Add an implementation of logging")

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-30 10:54:38 -04:00
Sean Anderson
69529f9840 log: Fix missing negation of ENOMEM
Errors returned should be negative.

Fixes: 45fac9fc18 ("log: Correct missing free() on error in log_add_filter()")

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-30 10:54:38 -04:00
Heiko Schocher
821fd5ee20 imx6: enable early spi environment access on aristainetos boards
On aristianetos boards the display type is detected
through "panel" environment variable. Dependend on the
display type we detect the board type and this decides which
DTB we have to use for the board.

So we need early spi environment access.

Signed-off-by: Heiko Schocher <hs@denx.de>
2020-10-30 10:54:38 -04:00
Heiko Schocher
92765f45bb env: Access Environment in SPI flashes before relocation
Enable the new Kconfig option ENV_SPI_EARLY if you want
to use Environment in SPI flash before relocation.
Call env_init() and than you can use env_get_f() for
accessing Environment variables.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-30 10:54:38 -04:00
Heiko Schocher
1229533a2a env: split env_import_redund() into 2 functions
split from env_import_redund() the part which checks
which Environment is valid into a separate function
called env_check_redund() and call it from env_import_redund().

So env_check_redund() can be used from places which also
need to do this checks.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-30 10:54:38 -04:00
Tom Rini
8d7f3fcb4a Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell
- Armada 8k: Add NAND support via PXA3xx NAND driver (Baruch)
- Armada 8k: Use ATF serdes init instead of the "old" U-Boot version
  (Baruch)
- Minor update to Octeon TX/TX2 defconfig (Stefan)
2020-10-29 11:30:29 -04:00
Tom Rini
47754334b1 Xilinx changes for v2021.01-v2
common:
 - Add support for 64bit loadables from SPL
 
 xilinx:
 - Update documentation and record ownership
 - Enable eeprom board detection based legacy and fru formats
 - Add support for FRU format
 
 microblaze:
 - Optimize low level ASM code
 - Enable SPI/I2C
 - Enable distro boot
 
 zynq:
 - Add support for Zturn V5
 
 zynqmp:
 - Improve silicon detection code
 - Enable several kconfig options
 - Align DT with the latest state
 - Enabling security commands
 - Enable and support FPGA loading from SPL
 - Optimize xilinx_pm_request() calling
 
 versal:
 - Some DTs/Kconfig/defconfig alignments
 - Add binding header for clock and power
 
 zynq-sdhci:
 - Add support for tap delay programming
 
 zynq-spi/zynq-qspi:
 - Use clock framework for getting clocks
 
 xilinx-spi:
 - Fix some code issues (unused variables)
 
 serial:
 - Check return value from clock functions in pl01x
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCX5rH/QAKCRDKSWXLKUoM
 IRPAAJ9SvHR3w1qTc5W+Q5CWBUH5wJbNYQCaA4PpqZCdvyu1+nF5luL6JHhbDgw=
 =hOd7
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2021.01-v2' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2021.01-v2

common:
- Add support for 64bit loadables from SPL

xilinx:
- Update documentation and record ownership
- Enable eeprom board detection based legacy and fru formats
- Add support for FRU format

microblaze:
- Optimize low level ASM code
- Enable SPI/I2C
- Enable distro boot

zynq:
- Add support for Zturn V5

zynqmp:
- Improve silicon detection code
- Enable several kconfig options
- Align DT with the latest state
- Enabling security commands
- Enable and support FPGA loading from SPL
- Optimize xilinx_pm_request() calling

versal:
- Some DTs/Kconfig/defconfig alignments
- Add binding header for clock and power

zynq-sdhci:
- Add support for tap delay programming

zynq-spi/zynq-qspi:
- Use clock framework for getting clocks

xilinx-spi:
- Fix some code issues (unused variables)

serial:
- Check return value from clock functions in pl01x
2020-10-29 11:30:15 -04:00
Tom Rini
cdeb7b8f98 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-29 10:48:01 -04:00
Andre Przywara
5a4a891e04 MAINTAINERS, git-mailrc: Update sunxi maintainers
Maxime mentioned that he feels not having the time to be an Allwinner
maintainer anymore. Take over from him.

Maxime, many thanks for your great work in the past! I hope I can still
relay the occasional technical question to you in the future.

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2020-10-29 09:57:13 -04:00
Tom Rini
eca57cafa5 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- Bug fixes and updates on vid, ls1088a lx2160a and other layerscape
  platforms.
- Add optee_rpmb support for LX2 & Kontron sl28 support
2020-10-29 09:10:24 -04:00
Shmuel Hazan
aaedaaae63 mtd: nand: pxa3xx: enable NAND controller if the SoC needs it
Based on Linux kernel commit fc256f5789cb ("mtd: nand: pxa3xx: enable
NAND controller if the SoC needs it"). This commit adds support for the
Armada 8040 nand controller.

The kernel commit says this:

    Marvell recent SoCs like A7k/A8k do not boot with NAND flash
    controller activated by default. Enabling the controller is a matter
    of writing in a system controller register that may also be used for
    other NAND related choices.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Shmuel Hazan <shmuel.h@siklu.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-10-29 12:31:38 +01:00
Michal Simek
908daf86f9 xilinx: Enable SPI driver for Versal
Enable Zynq SPI driver for Versal.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-29 08:55:43 +01:00
Michal Simek
05af4834ad xilinx: Consolidate board_fit_config_name_match() for Xilinx platforms
Move board_fit_config_name_match() from Zynq/ZynqMP to common location.
This change will open a way to use it also by Microblaze and Versal.
Through this function there is a way to handle images with multiple DTBs.
For now match it with DEVICE_TREE as is done for Zynq.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-29 08:55:43 +01:00
Ashok Reddy Soma
728d21b8c7 mmc: zynq_sdhci: Add common function to set input/output tapdelays
Remove setting tapdelays for different speeds separately. Instead use
the ITAP and OTAP delay values which are read from the device tree.
If the DT does not contain tap delay values, the predefined values
will be used for the same.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-10-29 08:55:43 +01:00
Ashok Reddy Soma
d3d880b41a mmc: zynq_sdhci: Extend UHS timings till hs200
Fix the condition to set UHS timings for speeds upto HS200.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-10-29 08:55:33 +01:00
Baruch Siach
6d1edab44c mtd: pxa3xx_nand: remove dead code
The kfree() call is unreachable, and is not needed. Remove this call and
the fail_disable_clk label.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-10-29 08:00:12 +01:00
Shmuel Hazan
8dddfff4d8 mtd: pxa3xx_nand: port to use driver model
Use the generic DT code to find the device compatible property for us.
This makes the driver look more like other current drivers. It also make
it easier to add support for other variants like Armada 8K in a future
commit.

Signed-off-by: Shmuel Hazan <shmuel.h@siklu.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-10-29 08:00:12 +01:00
Baruch Siach
a941226e00 arm: dts: armada-cp110-master: update nand-controller
Align node properties to kernel dts node.

The change of compatible property does not affect any currently
supported board.

Keep U-Boot specific nand-enable-arbiter, and num-cs for compatibility
with the current driver.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-10-29 08:00:12 +01:00
Shmuel Hazan
e2eafaa18a arm: dts: armada-cp110-slave: add missing cps_nand
Align node properties to kernel dts node.

Keep U-Boot specific nand-enable-arbiter, and num-cs for compatibility
with the current driver.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Shmuel Hazan <shmuel.h@siklu.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-10-29 08:00:12 +01:00
Stefan Roese
ccb350491f arm: octeontx: Enable network support in supported boards
Enable the now included network drivers in the currently supported
Marvell Octeon TX & TX2 boards.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Aaron Williams <awilliams@marvell.com>
Cc: Suneel Garapati <sgarapati@marvell.com>
Cc: Chandrakala Chavva <cchavva@marvell.com>
2020-10-29 08:00:12 +01:00
Igal Liberman
3261f6d390 phy: marvell: cp110: update mode parameter for pcie power on calls
It helps ATF to determine who called power on function (U-boot/Linux).

The corresponding ATF code was added in this commit:

  mvebu: cp110: avoid pcie power on/off sequence when called from Linux
  55df84f974

Signed-off-by: Igal Liberman <igall@marvell.com>
Reviewed-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-10-29 08:00:12 +01:00
Grzegorz Jaszczyk
0a1a1642aa phy: marvell: cp110: let the firmware configure comphy for PCIe
Replace the comphy initialization for PCIe with appropriate SMC call, so
the firmware will perform appropriate comphy initialization.

Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Ken Ma <make@marvell.com>
Reviewed-by: Igal Liberman <igall@marvell.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-10-29 08:00:12 +01:00
Grzegorz Jaszczyk
b24bb99df1 phy: marvell: cp110: let the firmware configure the comphy
Replace all comphy initialization with appropriate smc calls. It will
result with triggering synchronous exception that is handled by Secure
Monitor code in EL3. Then the Secure Monitor code will dispatch each smc
call (by parsing the smc function identifier) and triggers appropriate
comphy initialization.

This patch reworks serdes handling for: SATA, SGMII, HS-SGMII and SFI
interfaces.

Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-by: Igal Liberman <igall@marvell.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-10-29 08:00:12 +01:00
Tom Rini
81a659e10a Prepare v2021.01-rc1
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-28 16:30:06 -04:00
Tom Rini
4f1d3079b9 Merge branch '2020-10-28-mux-driver-framework'
- Add a framework for mux drivers
2020-10-28 14:50:09 -04:00
Pratyush Yadav
15995ac3f4 test: mux-cmd: Add tests for the 'mux' command
Tests tests run the three mux subcommands: list, select, and deselect,
and verify that the commands do what we expect.

Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-28 11:49:31 -04:00
Pratyush Yadav
05115abe8d cmd: Add a mux command
This command lets the user list, select, and deselect mux controllers
introduced with the mux framework on the fly. It has 3 subcommands:
list, select, and deselect.

List: Lists all the mux present on the system. The muxes are listed for
each chip. The chip is identified by its device name. Each chip can have
a number of mux controllers. Each is listed in sequence and is assigned
a sequential ID based on its position in the mux chip. It lists details
like ID, whether the mux is currently selected or not, the current
state, the idle state, and the number of states.

A sample output would look something like:

=> mux list
a-mux-controller:
	ID	Selected	Current State	Idle State	Num States
	0	no        	unknown   	as-is     	0x4
	1	no        	0x2       	0x2       	0x10
	2	no        	0x73      	0x73      	0x100

another-mux-controller:
	ID	Selected	Current State	Idle State	Num States
        0       no              0x1             0x1             0x4
        1       no              0x2             0x2             0x4

Select: Selects a given mux and puts it in the specified state. This
subcommand takes 3 arguments: mux chip, mux ID, state to set
the mux in. The arguments mux chip and mux ID are used to identify which
mux needs to be selected, and then it is selected to the given state.
The mux needs to be deselected before it can be selected again in
another state. The state should be a hexadecimal number.

For example:
=> mux list
a-mux-controller:
        ID      Selected        Current State   Idle State      Num States
        0       no              0x1             0x1             0x4
        1       no              0x1             0x1             0x4
=> mux select a-mux-controller 0 0x3
=> mux list
a-mux-controller:
        ID      Selected        Current State   Idle State      Num States
        0       yes             0x3             0x1             0x4
        1       no              0x1             0x1             0x4

Deselect: Deselects a given mux and puts it in its idle state. This
subcommand takes 2 arguments: the mux chip and mux ID to identify which
mux needs to be deselected. So in the above example, we can deselect mux
0 using:

=> mux deselect a-mux-controller 0
=> mux list
a-mux-controller:
        ID      Selected        Current State   Idle State      Num States
        0       no              0x1             0x1             0x4
        1       no              0x1             0x1             0x4

Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-28 11:49:31 -04:00
Jean-Jacques Hiblot
739592ccbb test: Add tests for the multiplexer framework
Provide tests to check the behavior of the multiplexer framework.

Two sets of tests are added. One is using an emulated multiplexer driver
that can be used to test basic functionality like select, deselect, etc.
The other is using the mmio mux which adds tests specific to it.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-28 11:49:31 -04:00
Pratyush Yadav
4145fc189c Kconfig: Increase the pre-relocation memory
The memory is close to full and adding a syscon node in test.dts makes
it go over the limit and makes malloc() fail on startup.

Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-28 11:49:31 -04:00
Jean-Jacques Hiblot
35b8b92c85 drivers: mux: mmio-based syscon mux controller
This adds a driver for mmio-based syscon multiplexers controlled by
bitfields in a syscon register range.
This is heavily based on the linux mmio-mux driver.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
2020-10-28 11:49:30 -04:00
Jean-Jacques Hiblot
90a979d788 dm: board: complete the initialization of the muxes in initr_dm()
This will probe the multiplexer devices that have a "u-boot,mux-autoprobe"
property. As a consequence they will be put in their idle state.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
2020-10-28 11:48:55 -04:00
Jean-Jacques Hiblot
0ad40b2463 drivers: Add a new framework for multiplexer devices
Add a new subsystem that handles multiplexer controllers. The API is the
same as in Linux.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
[trini: Update some error calls to use different functions or pass
        correct arguments]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-28 11:48:32 -04:00
Tom Rini
39dd7c1d6b Pull request for UEFI sub-system for efi-2021-01-rc2
A software RTC driver is supplied for UEFI SCT testing.
 
 The following UEFI related bugs are fixed:
 
 * correct handling of daylight saving time in GetTime() and SetTime()
 * handling of the gd register in function tracing on RISC-V
 * disable U-Boot devices in ExitBootServices()
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl+ZVsUACgkQxIHbvCwF
 GsQErQ//e3iIOjXbZnoHnkm0euyNO/3iMo+p2xcb9NSsbu7wv428adBSyKheTxOx
 q5RGAhFmFxD5lsh0GP7fpOEhOA21qb5JE7yPtLZ//2Es116zp1WB41+KPyMXevcX
 qBn5ZWIHFtwaG1u/KZ7wvAl2QBKD7+8RzcZTEy7i7DymTxug0yjdU2j8YgiDtsUL
 72HOH/hN6rktckVwyuap5h/Q8Ypn3lg+Uck1jOL8DJNwIgNZOUwWqXFGeLvoqDcT
 AouHpCOGn85/AF9McEaBqKX0RrFKJZtqudAzqPnf9iPVOPPXTPYDCNNdmg1uMzmf
 pSN+Eu5Xfq3/s+JnxlpawdJ2Aphw/LHECOZfEPiZPxjPOqY246QX74koeS+QQWcv
 Nzvk4Sc4qd/3zxH0X2eYABgGNJ7dZl24uc4k/zyrG57g2b0RHw6CWqeyfpvhPiIs
 /lZg3q9XPkURBmCvO0VnIIAttds7EH1u67adHubd7Va3KZKJPgc9jbKmVKSWl0n6
 /9oyJAOQIPP6CxPz9dh7xBw7XZDqTjN4kX6rhZ88aXElusRMLJ8QJ8P0BgsGy7n4
 A8OCYxxK+ONiXOo+0wCoB7SXUAExGMWS0bkgYc6k9gFx421aEREOscZBnQXEwd/5
 KIX9gwZ9bhPPqz02WeiY+g2q9dfalAFbCnWpU/Jiil84Zu4lyB4=
 =1Hx6
 -----END PGP SIGNATURE-----

Merge tag 'efi-2021-01-rc2' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for efi-2021-01-rc2

A software RTC driver is supplied for UEFI SCT testing.

The following UEFI related bugs are fixed:

* correct handling of daylight saving time in GetTime() and SetTime()
* handling of the gd register in function tracing on RISC-V
* disable U-Boot devices in ExitBootServices()
2020-10-28 08:35:28 -04:00
Tom Rini
a45da8f51e Merge branch '2020-10-27-further-log-enhancements'
- Allow for log message continuation.
- Test fix, build time error checking for new categories
2020-10-28 08:34:11 -04:00
Heinrich Schuchardt
2a0cbf3bca log: correct and check array size of log categories
The log command has led to NULL dereferences if an unknown category name
name was used due to missing entries in the list of category names.

Add compile time checks for the array sizes of log_cat_name and
log_lvl_name to avoid future mishaps.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-27 17:04:15 -04:00
Heinrich Schuchardt
0eae552d18 efi_loader: daylight saving time
Adjust the SetTime() and GetTime() runtime services to correctly convert
the daylight saving time information when communicating with the RTC.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-27 21:13:16 +01:00
Ilias Apalodimas
529441ca89 efi_loader: Disable devices before handing over control
U-Boot Driver Model is supposed to remove devices with either
DM_REMOVE_ACTIVE_DMA or DM_REMOVE_OS_PREPARE flags set, before exiting.
Our bootm command does that by explicitly calling calling
"dm_remove_devices_flags(DM_REMOVE_ACTIVE_ALL);" and we also disable any
USB devices.

The EFI equivalent is doing none of those at the moment. As a result
probing an fTPM driver now renders it unusable in Linux. During our
(*probe) callback we open a session with OP-TEE, which is supposed to
close with our (*remove) callback. Since the (*remove) is never called,
once we boot into Linux and try to probe the device again we are getting
a busy error response. Moreover all uclass (*preremove) functions won't
run.

So let's fix this by mimicking what bootm does and disconnect devices
when efi_exit_boot_services() is called.

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-27 21:13:16 +01:00
Ilias Apalodimas
19763ea0d2 efi_loader: Sort header file ordering
Order header files according to https://www.denx.de/wiki/U-Boot/CodingStyle

Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-27 21:13:15 +01:00
Heinrich Schuchardt
d3d6afae3c trace: conserve gd register on RISC-V
An UEFI application may change the value of the register that gd lives in.
But some of our functions like get_ticks() access this register. So we
have to set the gd register to the U-Boot value when entering a trace
point and set it back to the application value when exiting the trace
point.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-27 21:13:15 +01:00
Heinrich Schuchardt
87e9963d5a rtc: provide an emulated RTC
On a board without hardware clock this software real time clock can be
used. The build time is used to initialize the RTC. So you will have
to adjust the time either manually using the 'date' command  or use
the 'sntp' to update the RTC with the time from a network time server.
See CONFIG_CMD_SNTP and CONFIG_BOOTP_NTPSERVER. The RTC time is
advanced according to CPU ticks.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-27 21:13:15 +01:00
Heinrich Schuchardt
cbf0ffea14 Makefile: provide constant with seconds since epoch
Provide a constant U_BOOT_EPOCH with the number of seconds since
1970-01-01. This constant can be used to initialize a software
real time clock until it is updated via the 'sntp' command.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-27 21:13:15 +01:00
Heinrich Schuchardt
920157678b test: log: test message continuation
Provide a unit test checking that a continuation message will use the same
log level and log category as the previous message.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-27 13:50:53 -04:00