Commit Graph

54498 Commits

Author SHA1 Message Date
Florinel Iordache
bae54ac99e ls1046aqds: Bypass xfi port fixup for KR mode
u-boot makes a fixup for LS1046AQDS board to setup the properties
'fixed-link' and 'phy-connection-type' to 'xgmii' but in case of
backplane mode this fixup is not correct because it causes the KR link
to fail and so it must be bypassed in order to keep the link in KR
mode as it is defined in DTS.

Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
[YS: Fix compiling warning]
Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17 13:17:21 -08:00
Laurentiu Tudor
a954f6fe70 armv8: fsl-layerscape: properly configure qdma ICID
The ICIDs for the qdma device are not configured through SCFG but
through some registers found in the actual device register block.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17 13:17:15 -08:00
Yinbo Zhu
7a0425dd96 mmc: fsl_esdhc: make get_cd work well in dm_mmc_ops
This patch is to make get_cd work well when DM_MMC enabled

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17 13:17:10 -08:00
Mian Yousaf Kaukab
7e96804975 fsl-layerscape: dpaa: fix fsl-mc status in fdt with bootefi
fsl-mc lazyapply command applies dpl from efi_exit_boot_services().
Status of fsl-mc node in working fdt is updated at this stage.
However, an efi application like grub may already have copied the fdt.
So the updates to fdt done at efi_exit_boot_services() may not be
visible to the OS. Fix it by updating fdt earlier if fsl-mc lazyapply
command is used.

Fixes: b7b8410a8f (ls2080: Exit dpaa only right before exiting U-Boot)
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17 13:16:49 -08:00
Hou Zhiqiang
5b994e85a5 armv8: ls1043a: correct the PCIe INTx fixup
On LS1043A rev1.0 there are 4 interrupt pins for INTx, and on
rev1.1 there is only 1 for INTx, so the current fixup is inverse
of the fact.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17 13:16:44 -08:00
Hou Zhiqiang
ec88ff80ff armv8: ls1043a: add SVR definitions for 23x23 package silicon
LS1043A/LS1023A 23x23 package silicon has different SVR:VAR_PER.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17 13:16:40 -08:00
Rajesh Bhagat
fc16f99949 configs: update TFABOOT defconfigs for SD boot support
update TFABOOT defconfig for SD boot on below NXP chasis2
and chasis3 platforms:

ls1043a, ls1046a, ls1088a and ls2088a.

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17 13:16:35 -08:00
Rajesh Bhagat
43d17c485f env: fix allow to build multiple environments
Patch fixes build error when enabling CONFIG_ENV_IS_IN_SPI_FLAS
and CONFIG_ENV_IS_IN_MMC at the same time mentioned issue in
below link:

Refer: https://lists.denx.de/pipermail/u-boot/2018-February/319565.html

build error when enabling CONFIG_ENV_IS_IN_SPI_FLASH and
CONFIG_ENV_IS_IN_MMC at the same time.

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17 13:16:31 -08:00
Rajesh Bhagat
1908201cae armv8: ls2088aqds: Add TFABOOT support
TFABOOT support includes:
 - ls2088aqds_tfa_defconfig to be loaded by trusted firmware
 - environment address and size changes for TFABOOT

Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17 13:16:26 -08:00
Rajesh Bhagat
9570df03ee armv8: ls2088ardb: Add TFABOOT support
TFABOOT support includes:
  - ls2088ardb_tfa_defconfig to be loaded by trusted firmware
  - environment address and size changes for TFABOOT
  - define BOOTCOMMAND for TFABOOT
  - remove EL3 specific erratas for TFABOOT

Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17 13:16:22 -08:00
Pankit Garg
1a12b4a0ac armv8: ls1088aqds: Add TFABOOT support
TFABOOT support includes:
 - ls1088aqds_tfa_defconfig to be loaded by trusted firmware
 - environment address and size changes for TFABOOT
 - MC address changes for TFABOOT
 - define BOOTCOMMAND for TFABOOT
 - ifc chip select changes for TFABOOT

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17 13:16:11 -08:00
Pankit Garg
143af3c6d5 armv8: ls1088ardb: Add TFABOOT support
TFABOOT support includes:
- ls1088ardb_tfa_defconfig to be loaded by trusted firmware
- environment address and size changes for TFABOOT
- MC address changes for TFABOOT
- define BOOTCOMMAND for TFABOOT
- ifc chip select changes for TFABOOT

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17 13:16:04 -08:00
Pankit Garg
1f3d739a23 ls1043a: add support for nand-boot cmd for TFA
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17 13:15:59 -08:00
Rajesh Bhagat
bf0f791087 drivers: ifc: restore the legacy flow for IFC config
Restore the legacy flow along with TFABOOT flow for
IFC configuration.

Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17 13:15:53 -08:00
Rajesh Bhagat
d23da2ae21 armv8: fsl-layerscape: fixes for TFABOOT framework
Fixes for TFABOOT framework
- update eMMC bootsrc to SD_MMC
- Increase buffer size for mcinitcmd from 256 to 512
- Fix mcinitcmd and bootcmd for Secure Boot

Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17 13:15:25 -08:00
Tom Rini
d3689267f9 Prepare v2019.01
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-14 17:02:36 -05:00
Fabio Estevam
29c2edb42b mmc: fsl_esdhc: Avoid infinite loop in esdhc_send_cmd_common()
The following hang is observed on a Hummingboard 2 MicroSOM
i2eX iMX6D - rev 1.3 with no eMMC populated on board:

U-Boot SPL 2018.11+gf6206f8587 (Nov 16 2018 - 00:56:34 +0000)
Trying to boot from MMC1

U-Boot 2018.11+gf6206f8587 (Nov 16 2018 - 00:56:34 +0000)

CPU:   Freescale i.MX6D rev1.5 996 MHz (running at 792 MHz)
CPU:   Extended Commercial temperature grade (-20C to 105C) at 33C
Reset cause: POR
Board: MX6 HummingBoard2
DRAM:  1 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... *** Warning - bad CRC, using default environment

No panel detected: default to HDMI
Display: HDMI (1024x768)
In:    serial
Out:   serial
Err:   serial
---> hangs

which is caused by the following infinite loop inside esdhc_send_cmd_common()

	while (!(esdhc_read32(&regs->irqstat) & flags))
		;

Instead of looping forever, provide an exit path so that a timeout
error can be propagated in the case irqstat does not report
any interrupts, which may happen when no eMMC is populated on
board.

Reported-by: Ricardo Salveti <rsalveti@rsalveti.net>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Tested-by: Ricardo Salveti <rsalveti@rsalveti.net>
2019-01-14 11:26:12 -05:00
Fabio Estevam
789ee25de6 imx8mq_evk_defconfig: Move file system options to Kconfig
Chris Spencer reports that when enabling ext4 read support without
also enabling write support the following error is seen:

fs/fs.c:198:12: error: 'ext4_write_file' undeclared here (not in a
function); did you mean 'ext4_read_file'?
   .write = ext4_write_file,
            ^~~~~~~~~~~~~~~
Fix this problem by moving these options to Kconfig.

Reported-by: Chris Spencer <spencercw@gmail.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-01-14 11:26:12 -05:00
Alex Elder
cdee91a044 poplar: save environment at a different offset
Change CONFIG_ENV_OFFSET for Poplar to be 1MB further into the eMMC
than before.  This puts it immediately prior to the space we are
reserving offset 0x200000-0x400000 for UEFI to save its persistent
data.  Define CONFIG_ENV_SIZE as a product of env_mmc_nblks and the
sector size, like CONFIG_ENV_OFFSET is.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2019-01-14 09:09:15 -05:00
Tom Rini
c9e257a911 Merge branch 'master' of git://git.denx.de/u-boot-socfpga 2019-01-11 10:47:53 -05:00
Tom Rini
7f9418688d Merge branch 'master' of git://git.denx.de/u-boot-usb 2019-01-11 10:47:41 -05:00
Tom Rini
d3035b8560 Revert "fs: fat: assign rootdir sector when accessing root directory"
This particular commit is causing a regression on stih410-b2260 and
other platforms when reading from FAT16.  Noting that I had rebased the
original fix from Thomas onto then-current master, there is also
question from Akashi-san if the change is still needed after other FAT
fixes that have gone in.

This reverts commit a68b0e11ea.

Reported-by: Patrice Chotard <patrice.chotard@st.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Thomas RIENOESSL <thomas.rienoessl@bachmann.info>
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-11 10:15:42 -05:00
Lukasz Majewski
b6a6238f04 Revert "dm: pinctrl: Prevent (re-)configuring pins when already done before relocation"
This reverts commit a7f4b4b344.

As reported by Alex Kiernan the above optimization introduces a
regression in the below use case where:

1. Device has defined 'u-boot,dm-spl' property (@ eMMC DTS node)

2. The device downloads its MLO/SPL via UART (not eMMC - the eMMC pinmux
pins are NOT probed/configured in MLO/SPL).

3. The loaded via UART MLO/SPL wants to load Linux from eMMC. In this case
the DM core and pinctrl uclass checks 'u-boot,dm-spl' and don't
configure pins (as it thinks that those were initialized in MLO/SPL).

As we are very close to release - please revert this commit.

Reported-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-11 10:03:42 -05:00
Tien Fong Chee
70cae47014 ARM: dts: socfpga: Add missing SDMMC reset
The SDMMC reset is missing from DT, so the reset manager cannot unreset
the SDMMC. Add the missing DT reset entry.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2019-01-11 15:51:38 +01:00
Jean-Jacques Hiblot
b3c518a882 dm: usb: gadget: Fix boot breakage on sunxi platforms
Fixes commit 0131162439 ("dm: usb: create a new UCLASS ID for USB gadget
devices")

The UCLASS_DRIVER for id UCLASS_USB_GADGET_GENERIC needs to be declared
even for platforms that do not enable DM_USB_GADGET. Otherwise the driver
for their usb peripheral controller fails to bind.

Reported-by: Priit Laes <plaes@plaes.org>
Reported-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Tested-by: Priit Laes <plaes@plaes.org>
Acked-by: Jagan Teki <jagan@openedev.com>
2019-01-10 18:53:03 +01:00
Jean-Jacques Hiblot
db17a92d28 usb: Make compiling gadget support optional
There is no need to compile and include this code if it is not used.
CONFIG_USB_GADGET can be used for the purpose.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-01-10 18:52:55 +01:00
Jean-Jacques Hiblot
f811e9763f Kconfig: rename CONFIG_SPL_USB_GADGET_SUPPORT as CONFIG_SPL_USB_GADGET
The SPL option for USB gadget should be named after the option for u-boot
(CONFIG_USB_GADGET)

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-01-10 18:52:55 +01:00
Jean-Jacques Hiblot
b975a52e02 ARM: dts: define USB aliases for all omap5 platforms
This allows us to properly map the USB controller indexes

Tested on dra76 evm, am572 evm

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-01-10 18:52:52 +01:00
Jean-Jacques Hiblot
801f1fa442 dm: usb: udc: Use SEQ_ALIAS to index the USB gadget ports
dfu, fastbot and other usb gadget commands take the USB port index as a
parameter. Currently this index is assigned in the order of the driver
bindings.
Changing this behavior using the SEQ_ALIAS feature. This option assign to
the device a SEQ number based on its alias (if it exists)

To use it we must set the DM_UC_FLAG_SEQ_ALIAS flag and follow the existing
naming convention: use "usb" for the name of the gadget UCLASS_DRIVER
(same as for the UCLASS_USB).

If no alias is provided, then the index falls back to the order in which
the bindings took place.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reported-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
2019-01-10 18:52:51 +01:00
Tom Rini
64abfc9b6b Merge branch 'master' of git://git.denx.de/u-boot-sunxi 2019-01-10 09:28:28 -05:00
Tom Rini
e5aa3f4d97 Fixes for 2019.01
-----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAlw2/EgPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et32w4MAInrLv5lIvzwlcCxsX25cbWO8TSRemt4Stbl
 g01Cq/yaHkTs/VTpHHqtuAy+PHBx6pFSIJNp8zheNy/VGMHavb+RSVH3d+KM6uU3
 qCfVQq3ZMm4NyvbnrJSW6Uu2qmmEJQssldWuRhIIEFK1nCrYKQp9eyo215miLbFE
 9b1MWFO+XV0Qz+HZQsk2ApiuvmaXu3qpvZ0tRRi9xb2dGJYYTuEcfvbehy7Iejta
 +JKd3wtZaKj1JDdsDFQoJs55OAdJySTSYAeNVzlstQ+1fYArB3Ju4et2QInWbXuF
 x/NdFAzyAtl4xOf8yQ9kbALa3TlofhPu9fJm7bniC3hf+ZPPwdS3jlvEy+DeCJIU
 tX/es+WgUVciiCfRHXS1RgFuHGDDpO5qi2RjSLqq6yRhlBAvXYhET2YCU9RLoLHY
 D57V6lkFl7jWto8xS7GoicKvGPS5MwjARw917TSocJzhJz86PeJBhOW6tR+E2/Zh
 kCDDCrKlyuLRg+2/eFV5H91TalwjQQ==
 =vYKZ
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20190110' of git://git.denx.de/u-boot-imx

Fixes for 2019.01
2019-01-10 09:28:16 -05:00
Jagan Teki
e8f37f4203 mmc: sunxi: Fix mmc clocks for DM_MMC
Existing clock configure code has been followed based on the
legacy MMC dt node definitions and it cannot work with recent
dts(i) sync from Linux.

So, add clock configure code for Allwinner platforms which support
DM_MMC and eventually this will drop once CLK support is in Mainline.

Fixes: 3c92cca3cd ("ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3")
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Priit Laes <plaes@plaes.org> # Gemei G9 A10 Tablet
Tested-by: Marek Kraus <gamelasterv2@gmail.com> # A10-OLinuXino-Lime
2019-01-10 14:45:15 +05:30
Tom Rini
43a6a1ec90 Merge branch '2019-01-08-master-imports'
- stm32f7 GPIO fixes
- SATA env fixes
- More DM migration deadline warnings
- Regression fix for non-DM MMC drivers
- dma_alloc_coherent size fix on ARM.
2019-01-09 16:02:29 -05:00
Fabio Estevam
d4a0c09892 imx8m: clock: Fix oscillator values
OSC_27M_CLK should return 27MHz and OSC_32K_CLK should return
32768Hz to reflect the reality.

This also keeps the values in sync with the Linux clock tree.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-01-09 17:10:30 +01:00
Peng Fan
f7e475db40 tools: imx8image: set dcd_skip to true
To B0[+] chips, dcd_skip needs to be true. For A0 chip, it needs
to be false, however A0 chip is no longer being supported anymore.
Considering we are moving code from imx-mkimage to uboot mkimage,
to make sure we not introduce some surprise, we still keep dcd_skip
code there.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-09 17:04:34 +01:00
Peng Fan
da72574b21 imx8: cpu: correct info
The CPU banner printed is as following:
CPU:   CPU:   Freescale i.MX8QXP RevB A35 at 147228 MHz

1. Drop the CPU:
2. Change vendor from Freescale to NXP

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-09 17:04:17 +01:00
Peng Fan
026381fc5a misc: imx8: scu: use platdata instead of priv data
priv data has not been allocated when doing bind, so it is
wrong to use dev_get_priv in bind call back.

Let's switch to use platdata in the driver to fix the issue.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-09 17:04:03 +01:00
Peng Fan
ecab65e4cd misc: imx: scu: avoid write null pointer
When boot_dev is true, fill boot device. However the original logic is when
boot_dev is false, fill boot device, this will trigger data abort.

Also fix sc_misc_get_control when using pointer val.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-09 17:03:45 +01:00
Peng Fan
224f745247 clk: imx8: fix build warning
When build clk driver in spl, met the warning:
"
drivers/clk/imx/clk-imx8.c:21:25: warning: ‘imx8_clk_names’ defined but not used [-Wunused-variable]
 static struct imx8_clks imx8_clk_names[] = {
                         ^~~~~~~~~~~~~~
"

Fix with wrapping the array with CONFIG_CMD_CLK.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-01-09 17:03:29 +01:00
Peng Fan
d17b0bedbf MAINTAINERS: update NXP i.MX mail list address
Update NXP i.MX mail list address

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-01-09 17:02:17 +01:00
Soeren Moch
72bc93e1ef board: tbs2910: Remove FIT support in defconfig to reduce u-boot size
The current defconfig build generates a u-boot.imx file that is too large
for the available space on a eMMC/SD card. Installing this file overwrites
the u-boot environment. So disable the unused FIT support to reduce the
size of the u-boot binary.

Signed-off-by: Soeren Moch <smoch@web.de>
2019-01-09 16:55:58 +01:00
Soeren Moch
b82c7c32ef board: tbs2910: Add u-boot.imx size limit check
Check the size of the generated u-boot.imx file. Report an error
if it would be too big and overwrite the u-boot environment.

Signed-off-by: Soeren Moch <smoch@web.de>
2019-01-09 16:55:42 +01:00
Chris Spencer
e3bc7c668f imx: Add Makefile dependency for mkimage_fit_atf.sh
The mkimage_fit_atf.sh SPL FIT generator script requires
u-boot-nodtb.bin, but this was not enforced by the Makefile. This could
cause the generator script to be executed before u-boot-nodtb.bin has
been created.

Signed-off-by: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com>
2019-01-09 16:53:53 +01:00
Marek Vasut
bf413781cf arm: mx5: Enable WDT and bootcounter on M53Menlo
Enable watchdog and bootcounter support on the M53Menlo board.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2019-01-09 16:50:03 +01:00
Stefan Agner
81653478eb ARM: vf610: ddrmc: do not write CR79 by default
The current value CTLUPD_AREF(0) is the reset value of the register,
so there is no need to write a value. If needed, the register can be
written using board specific CR settings.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-01-09 16:27:39 +01:00
Stefan Agner
52c2c97e7c ARM: vf610: ddrmc: fix initialization completion detection
The CR80 register has multiple interrupt bits, the code is supposed
to check bit 8 but instead uses a logical and. In most cases this
probably did not affect real operations since at that stage typically
none of the other bits are set.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2019-01-09 16:27:23 +01:00
Stefan Agner
b77e368fa2 ARM: vf610: ddrmc: fix CR138 preprocessor define
According to the data sheet bits 10-8 are PHYDRAM_CK_EN. Fix mask
to allow setting PHYDRAM_CK_EN correctly.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-01-09 16:27:08 +01:00
Stefan Agner
fb41ce0db0 toradex: colibri_vf: fix memory initialization
Commit 3f353ceccb ("vf610: refactor DDRMC code") changed on-die
termination (ODT) values from 120 Ohm to 60 Ohm and enabled a static
read/write leveling which has not been tested with this board. This
commit reverts both changes and makes sure that memory gets
initialized as it has been done before the mentioned commit.

Fixes: 3f353ceccb ("vf610: refactor DDRMC code")
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2019-01-09 16:26:50 +01:00
Stefan Agner
a95d444055 ARM: vf610: ddrmc: program Dummy DDRBYTE1/2
The Vybrid reference manual VFXXXRM Rev. 0 10/2016 states in chapter
5.2.6.1 DUMMY PADS (DDR/QuadSPI) that those pads need to be programed
for correct operation of DDR. Assume the default DDR pin configuration
which seems to work well on a Colibri VF50.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-09 16:19:36 +01:00
Stefan Agner
a1f2779f51 board: toradex: colibri_vf: unset NFS and LOADS/B
Safe some space by not selecting CMD_NFS and CMD_LOADS/B.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-01-09 16:18:19 +01:00