fsl-layerscape: dpaa: fix fsl-mc status in fdt with bootefi

fsl-mc lazyapply command applies dpl from efi_exit_boot_services().
Status of fsl-mc node in working fdt is updated at this stage.
However, an efi application like grub may already have copied the fdt.
So the updates to fdt done at efi_exit_boot_services() may not be
visible to the OS. Fix it by updating fdt earlier if fsl-mc lazyapply
command is used.

Fixes: b7b8410a8f (ls2080: Exit dpaa only right before exiting U-Boot)
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: York Sun <york.sun@nxp.com>

board/freescale/ls1088a/ls1088a.c

@@ -658,7 +658,8 @@ void fdt_fixup_board_enet(void *fdt)
 		return;
 	}
 
-	if ((get_mc_boot_status() == 0) && (get_dpl_apply_status() == 0))
+	if (get_mc_boot_status() == 0 &&
+	    (is_lazy_dpl_addr_valid() || get_dpl_apply_status() == 0))
 		fdt_status_okay(fdt, offset);
 	else
 		fdt_status_fail(fdt, offset);

board/freescale/ls2080a/ls2080a.c

@@ -89,7 +89,8 @@ void fdt_fixup_board_enet(void *fdt)
 		return;
 	}
 
-	if ((get_mc_boot_status() == 0) && (get_dpl_apply_status() == 0))
+	if (get_mc_boot_status() == 0 &&
+	    (is_lazy_dpl_addr_valid() || get_dpl_apply_status() == 0))
 		fdt_status_okay(fdt, offset);
 	else
 		fdt_status_fail(fdt, offset);

board/freescale/ls2080aqds/ls2080aqds.c

@@ -294,7 +294,8 @@ void fdt_fixup_board_enet(void *fdt)
 		return;
 	}
 
-	if ((get_mc_boot_status() == 0) && (get_dpl_apply_status() == 0))
+	if (get_mc_boot_status() == 0 &&
+	    (is_lazy_dpl_addr_valid() || get_dpl_apply_status() == 0))
 		fdt_status_okay(fdt, offset);
 	else
 		fdt_status_fail(fdt, offset);

board/freescale/ls2080ardb/ls2080ardb.c

@@ -330,7 +330,8 @@ void fdt_fixup_board_enet(void *fdt)
 		return;
 	}
 
-	if ((get_mc_boot_status() == 0) && (get_dpl_apply_status() == 0))
+	if (get_mc_boot_status() == 0 &&
+	    (is_lazy_dpl_addr_valid() || get_dpl_apply_status() == 0))
 		fdt_status_okay(fdt, offset);
 	else
 		fdt_status_fail(fdt, offset);

drivers/net/fsl-mc/mc.c

@@ -834,6 +834,11 @@ int get_dpl_apply_status(void)
 	return mc_dpl_applied;
 }
 
+int is_lazy_dpl_addr_valid(void)
+{
+	return !!mc_lazy_dpl_addr;
+}
+
 /*
  * Return the MC address of private DRAM block.
  * As per MC design document, MC initial base address

include/fsl-mc/fsl_mc.h

@@ -54,6 +54,7 @@ struct mc_ccsr_registers {
 void fdt_fsl_mc_fixup_iommu_map_entry(void *blob);
 int get_mc_boot_status(void);
 int get_dpl_apply_status(void);
+int is_lazy_dpl_addr_valid(void);
 #ifdef CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET
 int get_aiop_apply_status(void);
 #endif