Commit Graph

26 Commits

Author SHA1 Message Date
Simon Glass
cd93d625fd common: Drop linux/bitops.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
f7ae49fc4f common: Drop log.h from common header
Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:18 -04:00
Andre Przywara
106c1300a5 sunxi: clocks: Add H6 USB clock gates and resets
To enable USB support in U-Boot, add the required clock and reset gates
to the H6 clock driver. Once enabled, the generic EHCI/OCHI drivers will
pick them up from there automatically.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> # Pine-H64
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-16 17:13:15 +05:30
Jagan Teki
33685372cf clk: sunxi: r40: Fix GMAC reset reg offset
GMAC reset reg offset added by below commit seems to assume
it as EMAC but R40 indeed using GMAC.
"clk: sunxi: Implement EMAC, GMAC clocks, resets"
(sha1: 68620c9698)

So, fix by updating the reg offset for RST_BUS_GMAC.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-16 16:29:00 +05:30
Jagan Teki
9d1e136734 clk: sunxi: a10: Add CLK_AHB_GMAC
CLK_AHB_GMAC was suppose to be part of previous commit
"clk: sunxi: Implement A10 EMAC clocks" add it so-that
we can get rid of sunxi_set_gate warning on boot message.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-01 21:45:15 +05:30
Jagan Teki
aefc0b7a60 clk: sunxi: h3: Implement EPHY CLK and RESET
EPHY CLK and RESET is available in Allwinner H3 EMAC
via mdio-mux node of internal PHY. Add the respective
clock and reset reg and bits.

Cc: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-03-09 13:16:35 +05:30
Jagan Teki
68620c9698 clk: sunxi: Implement EMAC, GMAC clocks, resets
- Implement EMAC, GMAC clocks via ccu_clk_gate for
  all supported Allwinner SoCs.
- Implement EMAC, GMAC resets via ccu_reset for all
  supported Allwinner SoCs.

Cc: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-03-09 13:16:35 +05:30
Jagan Teki
3d83c4a1d4 clk: sunxi: Implement A10 EMAC clocks
Implement EMAC clocks via ccu_clk_gate for Allwinner A10 SoC.

Which would eventually used in sunxi_emac.c driver.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-03-09 13:16:35 +05:30
Jagan Teki
82111469a5 clk: sunxi: Implement SPI clocks, resets
- Implement SPI AHB, MOD clocks via ccu_clk_gate for all
  supported Allwinner SoCs
- Implement SPI resets via ccu_reset for all supported
  Allwinner SoCs.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2019-03-04 18:08:56 +05:30
Andre Przywara
13b0867dc3 sunxi: clk: enable clk and reset for CCU devices
Some Allwinner clock devices have parent clocks and reset gates itself,
which need to be activated for them to work.

Add some code to just assert all resets and enable all clocks given.
This should enable the A80 MMC config clock, which requires both to be
activated. The full CCU devices typically don't require resets, and have
just fixed clocks as their parents. Since we treat both as optional and
enabling fixed clocks is a NOP, this works for all cases, without the need
to differentiate between those clock types.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jagan Teki <jagan@openedev.com>
2019-01-30 18:21:35 +05:30
Andre Przywara
e0c7ce7e52 sunxi: clk: A80: add MMC clock support
The A80 handles resets and clock gates for the MMC devices differently,
outside of the CCU IP block. Consequently we have a separate clock
device with a separate binding for that.

Implement that with the respective clock gates and resets to allow the
A80 taking part in the DM_MMC game.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
[jagan: fix a80 mmc clock config compatible]
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2019-01-29 23:33:08 +05:30
Andre Przywara
bb3e5aa289 sunxi: clk: add MMC gates/resets
Add the MMC clock gates and reset bits for all the Allwinner SoCs.
This allows them to be used by the MMC driver.

We don't advertise the mod clock yet, as this is still handled by the
MMC driver.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
[jagan: add V3S, A80 gates/resets]
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2019-01-29 23:30:11 +05:30
Jagan Teki
6901aab8e3 clk: sunxi: Add Allwinner A80 CLK driver
Add initial clock driver for Allwinner A80.

- Implement UART bus clocks via ccu_clk_gate table for
  A80, so it can accessed in common clk enable and disable
  functions from clk_sunxi.c
- Implement UART bus resets via ccu_reset table for A80,
  so it can accessed in common reset deassert and assert
  functions from reset-sunxi.c

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-01-18 22:19:09 +05:30
Jagan Teki
337fcdc06b clk: sunxi: Add Allwinner H6 CLK driver
Add initial clock driver for Allwinner H6.

- Implement UART bus clocks via ccu_clk_gate table for
  H6, so it can accessed in common clk enable and disable
  functions from clk_sunxi.c
- Implement UART bus resets via ccu_reset table for H6,
  so it can accessed in common reset deassert and assert
  functions from reset-sunxi.c

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2019-01-18 22:19:09 +05:30
Jagan Teki
8606f960d4 clk: sunxi: Implement UART resets
Implement UART resets for all relevant Allwinner SoC
clock drivers via ccu reset table.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2019-01-18 22:19:09 +05:30
Jagan Teki
4acc711930 clk: sunxi: Implement UART clocks
Implement UART clocks for all Allwinner SoC
clock drivers via ccu clock gate table.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2019-01-18 22:19:09 +05:30
Jagan Teki
6239a6d092 clk: sunxi: Add Allwinner V3S CLK driver
Add initial clock driver for Allwinner V3S.

- Implement USB bus and USB clocks via ccu_clk_gate table
  for V3S, so it can accessed in common clk enable and disable
  functions from clk_sunxi.c
- Implement USB bus and USB resets via ccu_reset table
  for V3S, so it can accessed in common reset deassert
  and assert functions from reset-sunxi.c

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-18 22:19:09 +05:30
Jagan Teki
78eb2a41f3 clk: sunxi: Add Allwinner R40 CLK driver
Add initial clock driver for Allwinner R40.

- Implement USB bus and USB clocks via ccu_clk_gate
  for R40, so it can accessed in common clk enable
  and disable functions from clk_sunxi.c
- Implement USB bus and USB resets via ccu_reset table
  for R40, so it can accessed in common reset deassert
  and assert functions from reset-sunxi.c

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-18 22:19:09 +05:30
Jagan Teki
03d87f5909 clk: sunxi: Add Allwinner A83T CLK driver
Add initial clock driver for Allwinner A83T.

- Implement USB bus and USB clocks via ccu_clk_gate table
  for A83T, so it can accessed in common clk enable and
  disable functions from clk_sunxi.c
- Implement USB bus and USB resets via ccu_reset table
  for A83T, so it can accessed in common reset deassert
  and assert functions from reset-sunxi.c

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-18 22:19:09 +05:30
Jagan Teki
3ab029368a clk: sunxi: Add Allwinner A23/A33 CLK driver
Add initial clock driver for Allwinner A23/A33.

- Implement USB bus and USB clocks via ccu_clk_gate table
  for A23/A33, so it can accessed in common clk enable and
  disable functions from clk_sunxi.c
- Implement USB bus and USB resets via ccu_reset table
  for A23/A33, so it can accessed in common reset deassert
  and assert functions from reset-sunxi.c

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-18 22:19:09 +05:30
Jagan Teki
4927e2e8d3 clk: sunxi: Add Allwinner A31 CLK driver
Add initial clock driver for Allwinner A31.

- Implement USB ahb1 and USB clocks via ccu_clk_gate table
  for A31, so it can accessed in common clk enable and disable
  functions from clk_sunxi.c
- Implement USB ahb1 and USB resets via ccu_reset table
  for A31, so it can accessed in common reset deassert
  and assert functions from reset-sunxi.c

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-18 22:19:09 +05:30
Jagan Teki
c8e743c1e8 clk: sunxi: Add Allwinner A10s/A13 CLK driver
Add initial clock driver for Allwinner A10s/A13.

- Implement USB ahb and USB clocks via ccu_clk_gate table
  for A10s/A13, so it can accessed in common clk enable and
  disable functions from clk_sunxi.c
- Implement USB resets via ccu_reset table for A10s/A13,
  so it can accessed in common reset deassert and assert
  functions from reset-sunxi.c

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-18 22:19:08 +05:30
Jagan Teki
6590bd8c47 clk: sunxi: Add Allwinner A10/A20 CLK driver
Add initial clock driver for Allwinner A10/A20.

- Implement USB ahb and USB clocks via ccu_clk_gate table
  for A10/A20, so it can accessed in common clk enable and
  disable functions from clk_sunxi.c
- Implement USB resets via ccu_reset table for A10/A20,
  so it can accessed in common reset deassert and assert
  functions from reset-sunxi.c

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-18 22:19:08 +05:30
Jagan Teki
e945816efb clk: sunxi: Add Allwinner H3/H5 CLK driver
Add initial clock driver for Allwinner H3/H5.

- Implement USB bus and USB clocks via ccu_clk_gate table for
  H3/H5, so it can accessed in common clk enable and disable
  functions from clk_sunxi.c
- Implement USB bus and USB resets via ccu_reset table for
  H3/H5, so it can accessed in common reset deassert and assert
  functions from reset-sunxi.c

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-18 22:19:08 +05:30
Jagan Teki
99ba430870 reset: Add Allwinner RESET driver
Add common reset driver for all Allwinner SoC's.

Since CLK and RESET share common DT compatible, it is CLK driver
job is to bind the reset driver. So add CLK bind call on respective
SoC driver by passing ccu map descriptor so-that reset deassert,
deassert operations held based on ccu reset table defined from
CLK driver.

Select DM_RESET via CLK_SUNXI, this make hidden section of RESET
since CLK and RESET share common DT compatible and code.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-18 22:19:08 +05:30
Jagan Teki
0d47bc7056 clk: Add Allwinner A64 CLK driver
Add initial clock driver for Allwinner A64.

Implement USB clock enable and disable functions for
OHCI, EHCI, OTG and USBPHY gate and clock registers
via ccu clk gate table.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-18 22:19:08 +05:30