Wolfgang Denk
2b208f5308
Move "ar" flags to config.mk to allow for silent "make -s"
...
Based on patch by Mike Frysinger, 20 Jun 2006
2006-10-09 01:02:05 +02:00
Wolfgang Denk
7ce343e499
Add missing files for EP82xxM boards
...
Patch by Aaron Sells, 20 Jun 2006
2006-10-09 00:48:57 +02:00
Wolfgang Denk
511d0c72b8
Coding style cleanup
2006-10-09 00:42:01 +02:00
Stefan Roese
5bc528fa4d
Update ALPR code (NAND support working now)
...
Patch by Stefan Roese, 07 Oct 2006
2006-10-07 11:35:25 +02:00
Stefan Roese
f3443867e9
Add CONFIG_BOARD_RESET to configure board specific reset function
...
Patch by Stefan Roese, 07 Oct 2006
2006-10-07 11:30:52 +02:00
Wolfgang Denk
eac5ba3e59
Merge with /home/m8/git/u-boot
2006-10-05 11:10:17 +02:00
Stefan Roese
56fb6ba179
Fix TLB setup for Ocotea board
...
Patch by Stefan Roese, 30 Sep 2006
2006-10-04 07:12:49 +02:00
Stefan Roese
d373325efd
Fix reset problem in sequoia sdram init code
...
Patch by Stefan Roese, 23 Sep 2006
2006-10-04 07:12:27 +02:00
Marian Balakowicz
7299712c86
Update for CAM5200 board:
...
- Map in a additional chip selects CS4 and CS5.
- Modify the port configration, configure six UARTs and no PCI,
ATA and USB.
- Add custom flash driver to handle specific byte swapping
2006-10-03 20:28:38 +02:00
Jon Loeliger
504b5cd0e2
Merge branch 'mpc85xx'
...
Conflicts:
drivers/tsec.c
2006-09-19 10:02:20 -05:00
Andy Fleming
09f3e09e9e
Add support for eTSEC 3 & 4 on 8548 CDS
...
* Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
This will only work on rev 1.3 boards (but doesn't break older boards)
* Cleaned up some comments to reflect the expanded role of tsec
in other systems
2006-09-19 09:41:48 -05:00
Andy Fleming
084d648b10
Added code to support 2.6.18 PCI changes in u-boot
...
* Added code to swizzle the IRQ map for the PCI
2006-09-19 09:41:08 -05:00
Jon Loeliger
afbdc649f8
Modified makefile for new build mechanism.
...
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-09-19 09:34:10 -05:00
Jon Loeliger
afa98843e4
Merge branch 'master' of http://www.denx.de/git/u-boot
...
Conflicts:
board/stxxtc/Makefile
2006-09-19 08:51:24 -05:00
Stefan Roese
64cd52efd1
Merge with /home/stefan/git/u-boot/denx
2006-09-18 10:48:03 +02:00
Stefan Roese
854bc8da75
Add support for AMCC Rainier PPX440GRx eval board
...
Patch by Stefan Roese, 13 Sep 2006
2006-09-13 13:56:49 +02:00
Wolfgang Denk
aeec782b02
Disable autoboot abort for FO300 when silent mode is enabled
...
(according to S1 switch setting).
Patch by Marian Balakowicz, 12 Sep 2006
2006-09-13 10:47:05 +02:00
Stefan Roese
d12ae80889
Add NAND environment support for PPC440EPx Sequoia NAND boot config
...
Patch by Stefan Roese, 12 Sep 2006
2006-09-12 20:19:10 +02:00
Stefan Roese
887e2ec9ec
Add support for AMCC Sequoia PPC440EPx eval board
...
- Add support for PPC440EPx & PPC440GRx
- Add support for PPC440EP(x)/GR(x) NAND controller
in cpu/ppc4xx directory
- Add NAND boot functionality for Sequoia board,
please see doc/README.nand-boot-ppc440 for details
- This Sequoia NAND image doesn't support environment
in NAND for now. This will be added in a short while.
Patch by Stefan Roese, 07 Sep 2006
2006-09-07 11:51:23 +02:00
Wolfgang Denk
f60ba0d35e
Fix build problems on sorcery board.
2006-09-04 02:01:27 +02:00
Wolfgang Denk
6741ae92f3
Merge with /home/m8/git/u-boot
2006-09-04 01:03:57 +02:00
Marian Balakowicz
f93286397e
Add support for a saving build objects in a separate directory.
...
Modifications are based on the linux kernel approach and
support two use cases:
1) Add O= to the make command line
'make O=/tmp/build all'
2) Set environement variable BUILD_DIR to point to the desired location
'export BUILD_DIR=/tmp/build'
'make'
The second approach can also be used with a MAKEALL script
'export BUILD_DIR=/tmp/build'
'./MAKEALL'
Command line 'O=' setting overrides BUILD_DIR environent variable.
When none of the above methods is used the local build is performed and
the object files are placed in the source directory.
2006-09-01 19:49:50 +02:00
Marian Balakowicz
24d3d37546
Remove the board/netstar/crcit binary from git repository.
2006-09-01 19:47:42 +02:00
Wolfgang Denk
e8143e72e1
Add splashscreen support for MCC200 board.
2006-08-30 23:09:00 +02:00
Stefan Roese
2b393b0f0a
PCIe endpoint support for AMCC Yucca 440SPe board
...
Patch by Tirumala R Marri, 26 Aug 2006
2006-08-29 08:05:15 +02:00
Stefan Roese
f5577aae4a
Improve DIMM detection for AMCC Yucca 440SPe board
...
Improved the memory DIMM detection for the Yucca 440SPe board for
the case where a memory DIMM is falsely detected as present.
This issue is seen on some AMCC Yucca 440SPe validation boards if
only one 512MB memory DIMM is installed, i.e. DIMM slot 0 is
populated and DIMM slot 1 is empty. In this case, U-Boot does
not correctly detect that there is only one DIMM memory module
installed and will falsely detect two DIMM memory modules are
present and therefore U-Boot will not calculate the correct amount
of total memory and u-boot will not booting up.
Patch by Adam Graham, 24 Aug 2006
2006-08-29 08:04:32 +02:00
Wolfgang Denk
16850919ff
Code cleanup
2006-08-27 18:10:01 +02:00
Wolfgang Denk
ed1cf8456f
Updates for MCC200 / PRS200 boards:
...
- support for configurations with SDRAM or DDR memory,
- support for highboot and lowboot
- adjusting environment definitions
2006-08-24 00:26:42 +02:00
Jon Loeliger
f1f33de332
Merge branch 'mpc86xx'
2006-08-22 12:26:51 -05:00
Jon Loeliger
80e955c7dd
General indent and whitespace cleanups.
2006-08-22 12:25:27 -05:00
Jon Loeliger
4b7576fb80
Merge branch 'master' of http://www.denx.de/git/u-boot
2006-08-22 10:17:59 -05:00
Wolfgang Denk
5196a7a03b
Minor cleanup
2006-08-18 23:27:33 +02:00
Marian Balakowicz
6d3bc9b8cf
Add support for WTK FO300 board (TQM5200 based).
2006-08-18 19:14:46 +02:00
Wolfgang Denk
6183bb9e5b
MCC200: restrict addressable flash space to 32 MB
2006-08-17 00:50:26 +02:00
Stefan Roese
899620c2d6
Add initial support for the ALPR board from Prodrive
...
NAND needs some additional testing
Patch by Heiko Schocher, 15 Aug 2006
2006-08-15 14:22:35 +02:00
Wolfgang Denk
c72d9c5285
Merge with /home/sr/git/u-boot/denx
2006-08-13 02:25:32 +02:00
Wolfgang Denk
7213859d11
Merge with /home/raj/git/u-boot
2006-08-11 18:19:53 +02:00
Rafal Jaworowski
36b904a7fd
Fix PCI-Express on PPC440SPe rev. A.
2006-08-11 12:35:52 +02:00
Wolfgang Denk
d10afb3916
Merge with /home/raj/git/u-boot
2006-08-10 15:40:49 +02:00
Rafal Jaworowski
692519b1ed
Add support for PCI-Express on PPC440SPe (Yucca board).
2006-08-10 12:43:17 +02:00
Wolfgang Denk
a3d9181e00
Fix compiler warning for TRAB board.
...
Patch by Martin Krause, 07 Aug 2006
2006-08-10 01:58:22 +02:00
Jon Loeliger
3754d6987c
Merge branch 'mpc86xx'
2006-08-09 15:32:42 -05:00
Jon Loeliger
40bc83559d
Removed MPC8641HPCN DTS source file from build.
...
It is no longer linked into U-Boot; its sources are
now located in the kernel tree.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-08-09 15:32:16 -05:00
Jon Loeliger
92c427b189
Merge branch 'mpc85xx'
...
Conflicts:
include/ft_build.h
include/pci.h
Resolved, though.
2006-08-09 14:41:17 -05:00
Matthew McClintock
b6c5e1373b
* Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
...
Signed-off-by: Andy Fleming <afleming@freescale.com>
2006-08-09 13:51:00 -05:00
Matthew McClintock
bf1dfffd8c
* Added VIA configuration table
...
* Added support for PCI2 on CDS
Patch by Andy Fleming 17-Mar-2006
Signed-off-by: Andy Fleming <afleming@freescale.com>
2006-08-09 13:50:56 -05:00
Matthew McClintock
c88f9fe66b
* Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
...
Signed-off-by: Andy Fleming <afleming@freescale.com>
2006-08-09 13:50:48 -05:00
Matthew McClintock
0e16387db1
* Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
...
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-08-09 13:50:30 -05:00
Matthew McClintock
855e6fb073
* Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
2006-08-09 13:50:23 -05:00
Jon Loeliger
281f69ede2
Merge branch 'wd'
2006-08-09 13:36:54 -05:00
Jon Loeliger
870cbeaa45
Merge branch 'mpc86xx'
2006-08-09 11:25:17 -05:00
John Traill
8fc8bd2cc4
Add Rapidio support for the MPC8641HPCN
...
Signed-off-by: John Traill <john.traill@freescale.com>
2006-08-09 11:20:30 -05:00
Stefan Roese
9ede3cc511
Add Macronix MXLV320T flash support for AMCC Bamboo
...
Patch by Stefan Roese, 07 Aug 2006
2006-08-07 14:31:21 +02:00
Jon Loeliger
3aeec28604
Merge branch 'mpc86xx'
2006-07-31 09:53:08 -05:00
Haiying Wang
71748af833
Correct the irq value of DUART2
2006-07-31 09:43:08 -05:00
Haiying Wang
239db37c94
Move get_board_sys_clk to board directory
2006-07-31 09:27:57 -05:00
Stefan Roese
a2c95a7224
PPC440 DDR setup: Set SDRAM0_CFG0[PMU]=0 for best performance
...
AMCC suggested to set the PMU bit to 0 for best performace on
the PPC440 DDR controller.
Please see doc/README.440-DDR-performance for details.
Patch by Stefan Roese, 28 Jul 2006
2006-07-28 18:34:58 +02:00
Jon Loeliger
5a8a5605b8
Merge branch 'mpc86xx'
2006-07-27 15:33:04 -05:00
Zhang Wei
c86360b830
Fixed OF device tree of mpc86xxhpcn board.
...
The changes works in with kernel irq mapping rework.
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
2006-07-27 15:32:02 -05:00
Stefan Roese
193dd95834
AMCC bamboo (440EP) U-Boot image reduced to 384kbyte
...
Please see doc/README.bamboo for details.
Patch by Stefan Roese, 27 Jul 2006
2006-07-27 16:14:05 +02:00
Wolfgang Denk
4819fad905
MCC200: set default configuration to low_boot DDR,
...
and support for configurable options high_boot and/or SDRAM.
2006-07-23 22:40:51 +02:00
Wolfgang Denk
fd27996dac
Add support for 256 MB SDRAM on CPU87
...
Patch by Josef Wagner, 25 Nov 2005
2006-07-22 21:45:49 +02:00
Wolfgang Denk
135ae0062f
Add configuration for cam5200 board (based on TQM5200S).
2006-07-22 01:20:03 +02:00
Wolfgang Denk
048f6b436b
Code cleanup
2006-07-21 20:57:53 +02:00
Wolfgang Denk
fc1840e881
Code cleanup.
2006-07-21 18:51:56 +02:00
Wolfgang Denk
966083e95f
More code cleanup
2006-07-21 15:24:56 +02:00
Wolfgang Denk
b9365a26a1
Code cleanup
2006-07-21 11:56:05 +02:00
Wolfgang Denk
87a5c73d66
Update NetStar board
...
Patch by Ladislav Michl, 03 Nov 2005
2006-07-21 11:38:33 +02:00
Wolfgang Denk
32cb2c70c4
Add support for friendly-arm SBC-2410X board
...
Patch by JinHua Luo, 01 Sep 2005
2006-07-21 11:31:42 +02:00
Wolfgang Denk
53dd6ce4f0
Add support for KVME080 board
...
Patch by Sangmoon Kim, 18 Aug 2005
2006-07-21 11:29:20 +02:00
Wolfgang Denk
5078cce81c
* Cleanup TQM5200 board configurations:
...
- make highboot configurations use environment at high end, too,
to avoid flash fragmentation
- always use redundand environment
- don't enable video code for modules without graphics controller
- provide useful (though different) mtdparts settings
- get rid of CONFIG_CS_AUTOCONF which was always set anyway
* Extend mkconfig tool to print more useful target name
2006-07-21 11:16:34 +02:00
Wolfgang Denk
978b10964c
Add support for high-boot on TQM5200 and TQM5200S boards.
...
Hint: the CPLD on the TQM5200 must be programmed with a software
version supporting the high boot option! The new TQM5200S is
already supporting this option. On the TQM5200 this option will be
supported in configurations with MPC5200 rev B processors.
To actually "high boot", set jumper X30 on the STK52xx.
Patch by Martin Krause, 12 Jul 2006
2006-07-19 18:01:38 +02:00
Wolfgang Denk
45a212c4d7
Add support for new TQM5200 revisions
...
- Support for TQM5200S (short version without graphic controller)
- Support for modules with 'N' type S29GL128N Spansion flashes
(requires changes to flash layout)
- Support for MPC5200B cpu (mostly support for second SDRAM bank)
2006-07-19 17:52:30 +02:00
Wolfgang Denk
bd3143f040
Fix support for PS/2 keyboard on TQM85xx boards
...
The PS/2 keyobard driver for the TQM85xx modules only supports the
internal DUART of the MPC85xx CPU. Since the MPC8560 doesn't
include a DUART, the TQM8560 modules can't be used with the PS/2
keyboard controller on the STK85xx board.
The PS/2 keyboard driver should work with the modules TQM8540,
TQM8541 and TQM8555, but it only has been tested on a TQM8540, yet.
Make sure the PS/2 controller on the STK85xx is programmed. Jumper
settings: X66 1-2, 9-10; X61 2-3
Patch by Martin Krause, 21 Jun 2006
2006-07-19 14:49:35 +02:00
Wolfgang Denk
c786f427f9
Adjust filenames for USB update images on TRAB board.
...
During an automatic update via USB stick, U-Boot searches for
images with the name "firmware.img" and "kernel.img". This names
are now changed to "firmw_01.img" and "kernl_01.img". This is done,
to prevent updates of new boards (with the new macronics "c" step
flashes) with old, incompatible firmware or kernel versions.
Patch by Martin Krause, 21 Jun 2006
2006-07-19 14:40:43 +02:00
Wolfgang Denk
d053ce62cd
Bugfix in VFD routine on TRAB board.
...
Make sure upper lext pixel can be set to blue, too
(so far only red was possible).
Patch by Martin Krause, 15 Feb 2006
2006-07-19 14:23:12 +02:00
Wolfgang Denk
5a3dfef732
Fix some bugs in TRAB board flash driver.
...
- increase CFG_FLASH_ERASE_TOUT from 2 to 15 seconds
- use CFG_FLASH_WRITE_TOUT for programming instead of CFG_FLASH_ERASE_TOUT
- remove "Unlock Bypass" mode, because macronix flashes do not support
this mode officially
- fix flash reset command from 0x00FF to 0x00F0. 0x00FF is only specified
for Intel compatible flashes, not for AMD compatible.
Patch by Martin Krause, 15 Feb 2006
2006-07-19 14:13:02 +02:00
Wolfgang Denk
0de7fa5939
Add additional error messages to flash driver on TRAB board
...
(for erase errors and timeout errors)
Patch by Martin Krause, 14 Feb 2006
2006-07-19 14:07:21 +02:00
Wolfgang Denk
b87dfd2854
Add support for TB5200 board
...
The TB5200 ("Tinybox") is a small baseboard for the TQM5200 module
integrated in a little aluminium case.
Patch by Martin Krause, 8 Jun 2006
Some code cleanup
2006-07-19 13:50:38 +02:00
Jon Loeliger
0f2859689a
Merge branch 'mpc86xx'
2006-07-13 10:58:28 -05:00
Haiying Wang
bea3f28d28
Add support for reading and writing mac addresses to or from ID EEPROM.
...
Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
With attached patch, we can use command "mac/mac read/mac save/"
to read and write EEPROM under u-boot prompt.
U-boot will calculate the checksum of EEPROM while bootup,
if it is right, then u-boot will check whether the mac address
of eTSEC0/1/2/3 is availalbe (non-zero).
If there is mac address availabe in EEPROM, u-boot will use it,
otherewise, u-boot will use the mac address defined in
MPC8641HPCN.h. This matches the requirement to set unique mac address
for each TSEC port.
Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
2006-07-13 10:57:37 -05:00
Markus Klotzbuecher
090eb73510
Add support for TQM885D board.
...
Patch by Martin Krause, 20 Mar 2006
Signed-off-by: Martin Krause <martin.krause@tqs.de>
2006-07-12 15:26:01 +02:00
Markus Klotzbuecher
b02d0177c1
Support for spc1920 board.
...
Patch by Markus Klotzbuecher, 12 Jul 2006
2006-07-12 08:48:24 +02:00
Wolfgang Denk
985b950a9b
Fix error in flash protection calculation on MCC200 board.
2006-07-10 23:22:43 +02:00
Wolfgang Denk
9d40799551
Major PCMCIA Cleanup to make code better readable and maintainable.
...
Notes:
- Board-dependend code for RPXLITE and RPXCLASSIC-based boards
placed to the drivers/rpx_pmcia.c file to avoid duplication.
Same for TQM8xx-based boards (drivers/tqm8xx_pmcia.c).
- drivers/i82365.c has been split into two parts located at
board/atc/ti113x.c and board/cpc45/pd67290.c (ATC and CPC45 are
the only boards using CONFIG_82365).
- Changes were tested for clean build and *very* *few* boards.
2006-07-10 23:07:28 +02:00
Wolfgang Denk
0095b787fe
Merge with /home/m8/git/u-boot
2006-07-05 10:03:52 +02:00
Marian Balakowicz
d19206b9a5
Fix AMCC bamboo eval board compilation errors.
2006-07-04 01:27:46 +02:00
Marian Balakowicz
fe84b48a94
Cleanup config file and bootup output for Yucca board.
2006-07-03 23:42:36 +02:00
Wolfgang Denk
3b5f61a025
Merge with /home/m8/git/u-boot
2006-06-30 19:32:25 +02:00
Marian Balakowicz
f6e5739a68
Merge: Add support for AMCC 440SPe CPU based eval board (Yucca).
2006-06-30 18:19:42 +02:00
Marian Balakowicz
6c5879f380
Add support for AMCC 440SPe CPU based eval board (Yucca).
2006-06-30 16:30:46 +02:00
Wolfgang Denk
a63c31cff5
Cleanup trab board for GCC-4.x
2006-06-26 10:54:52 +02:00
Jon Loeliger
321bbd41f9
Merge branch 'mpc86xx'
2006-06-22 08:53:47 -05:00
Jon Loeliger
684623ce92
Fix bug in 8641hpcn reset command with no args.
...
Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
2006-06-22 08:51:46 -05:00
Zhang Wei
8be429a5dd
Reworked IRQ mapping in OF-tree.
2006-06-22 08:31:21 -05:00
Wolfgang Denk
f73e73ba0e
Merge with /home/hs/U-Boot/u-boot-dev
2006-06-20 00:12:59 +02:00
Heiko Schocher
f5e0d03970
Add support for wrPPMC7xx/74xx boards
...
Patch from Richard Danter, 12 Aug 2005
2006-06-19 11:02:41 +02:00
Wolfgang Denk
8d352247ec
Merge with ssh://atlas/home/wd/git/u-boot/work
2006-06-19 01:46:08 +02:00
Wolfgang Denk
0c32d96ddd
Add support for gth2 board
...
Patch by Thomas Lange, Aug 11 2005
2006-06-16 17:32:31 +02:00
Wolfgang Denk
10af6d53bc
Fix DDR6 errata on TQM834x boards
...
Patch by Thomas Waehner, 07 Mar 2006
2006-06-16 16:53:06 +02:00
Wolfgang Denk
14d9ab351c
Remove obsolete flash driver board/tqm5200/flash.c
...
Patch by Martin Krause, 11 Jan 2006
2006-06-16 16:50:42 +02:00
Wolfgang Denk
bc8bb6d458
Add support for PS/2 keyboard on TQM85xx board
...
Patch by Martin Krause, 07 Nov 2005
Tested on a STK85XX baseboard. Make sure the PS/2 controller
has been programmed. Jumper Settings: X66 1-2, 9-10; X61 2-3
2006-06-16 16:40:54 +02:00
Wolfgang Denk
cebd1fcec0
Fix TRAB channel switching delay for trab_fkt.bin standalone applikation
...
Patch by Martin Krause, 08 Nov 2005
In tsc2000_read_channel() the delay after setting the multiplexer
to a temperature channel is increased from 1,5 ms to 10 ms. This
is to allow the multiplexer inputs to stabilize after huge steps
of the input signal level.
2006-06-16 16:14:28 +02:00
Wolfgang Denk
cd65a3dc87
Adjust TQM5200 make targets
...
Make the automatic CS configuration the default.
The dedicated configurations CONFIG_TQM5200_AA, CONFIG_TQM5200_AB
and CONFIG_TQM5200_AC are removed.
"TQM5200_config" is now the default for STK52XX.200 base boards.
On a STK52XX.100 base board "TQM5200_STK100_config" must be used.
Patch by Martin Krause, 07 Nov 2005
2006-06-16 16:11:34 +02:00
Wolfgang Denk
4bdb53cafb
Fix setting of environment variable "ver" on trab board
...
The environment variable "ver" is now set before
do_auto_update() is called, so that "ver" can be used
in USB update scripts.
Patch by Martin Krause, 27 Oct 2005
2006-06-16 15:56:12 +02:00
Wolfgang Denk
b9fff8ee83
Fix wrong usage of udelay() in led_blink() on trab board
...
Patch by Martin Krause, 27 Oct 2005
2006-06-16 15:52:58 +02:00
Wolfgang Denk
3e9a299231
Fix udelay bug in vfd.c for trab board
...
Patch by Martin Krause, 27 Oct 2005
2006-06-16 15:47:05 +02:00
Wolfgang Denk
9e18a4bc6c
Fix memory init problems on MCC200 board
2006-06-14 16:48:18 +02:00
Wolfgang Denk
b1d71358a9
Minor code cleanup.
2006-06-10 22:00:40 +02:00
Wolfgang Denk
4176c79964
Merge with /home/hs/U-Boot/u-boot-dev
2006-06-10 19:27:47 +02:00
Wolfgang Denk
9d4d3e3833
Merge with http://www.psyent.com/git/uboot (NIOS2 - Scott McNutt)
2006-06-10 01:36:27 +02:00
Wolfgang Denk
5d7022b041
Fix U-Boot enviroenment sector protection on MCC200 board
2006-06-09 21:19:21 +02:00
Scott McNutt
9cc8337832
Nios II - Add Altera EP1C20, EP1S10 and EP1S40 boards
...
Patch by Scott McNutt, 08 Jun 2006
2006-06-08 13:37:39 -04:00
Scott McNutt
3d22d0b89b
Update PK1C20 board
...
-Update base addresses for standard configuration
-Eliminate use of CACHE_BYPASS in board code
Patch by Scott McNutt, 08 Jun 2006
2006-06-08 12:03:21 -04:00
Jon Loeliger
8bb683b627
Merge branch 'mpc86xx'
2006-06-07 10:54:16 -05:00
Jon Loeliger
d9bf4858fc
Allow DTC path to be passed in.
...
Signed-off-by: Jon Loeliger <jdl@jdl.com>
2006-06-07 10:52:49 -05:00
Jon Loeliger
a941b83241
Merge branch 'mpc86xx'
2006-06-07 08:49:46 -05:00
Jon Loeliger
72ed528a94
Merge branch 'master' of http://www.denx.de/git/u-boot
2006-06-07 08:49:38 -05:00
Haiying Wang
c83ae9ea6d
Modify the IRQ of DUART2
2006-06-07 08:48:08 -05:00
Stefan Roese
4526c87eec
Update PCS440EP port to fit into one flash device (incl. environment)
...
Patch by Stefan Roese, 06 Jun 2006
2006-06-06 10:59:12 +02:00
Wolfgang Denk
2fd9eb509d
Minor cleanup
2006-06-02 17:04:21 +02:00
Stefan Roese
a4c8d1389f
Add support for PCS440EP board
...
Patch by Stefan Roese, 02 Jun 2006
2006-06-02 16:20:36 +02:00
Jon Loeliger
c934f655f9
Review cleanups.
...
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-05-31 14:01:32 -05:00
Jon Loeliger
cb5965fb95
White space cleanup.
...
Some 80-column cleanups.
Convert printf() to puts() where possible.
Use #include "spd_sdram.h" as needed.
Enhanced reset command usage message a bit.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-05-31 12:44:44 -05:00
Jon Loeliger
3d5c5be547
Removed unneeded local_bus_init() from 8641HPCN board.
...
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-05-31 11:39:34 -05:00
Jon Loeliger
4d3d729c16
Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
...
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-05-31 11:24:28 -05:00
Jon Loeliger
126aa70f10
Move mpc86xx PIXIS code to board directory
...
First cut at moving the PIXIS platform code out of
the 86xx cpu directory and into board/mpc8641hpcn
where it belongs.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-05-31 09:49:33 -05:00
Wolfgang Denk
b9b2480f4f
Correct GPIO setup (UART1/IRQ's) on yosemite & yellowstone
...
Patch by Stefan Roese, 29 May 2006
2006-05-30 17:45:30 +02:00
Wolfgang Denk
ba94a1bba3
* Update Intel IXP4xx support
...
- Add IXP4xx NPE ethernet MAC support
- Add support for Intel IXDPG425 board
- Add support for Prodrive PDNB3 board
- Add IRQ support
Patch by Stefan Roese, 23 May 2006
[This patch does not include cpu/ixp/npe/IxNpeMicrocode.c which still
sufferes from licensing issues. Blame Intel.]
2006-05-30 15:56:48 +02:00
Haiying Wang
ed45d6c930
Added pci@8000 block.
...
Updated ethernet interrupt mappings (moved up 48).
Cleaned up a few comments.
Signed-off-by: Jon Loeliger <jdl@jdl.com>
2006-05-26 10:13:04 -05:00
Jon Loeliger
586d1d5abd
Update 86xx address map and LAWBARs.
2006-05-19 13:54:02 -05:00
Jon Loeliger
f35ec68fb0
Enable 2nd CPU and I2C.
2006-05-19 13:54:02 -05:00
Jon Loeliger
9f37dc8cab
Merge branch 'mpc86xx'
2006-05-15 08:32:11 -05:00
Jon Loeliger
bf690dcb51
Update interrupt mapping.
2006-05-15 07:26:56 -05:00
Wolfgang Denk
8cba090c58
Add support for VirtLab2 board
...
(needed because of differences in the PCMCIA hardware).
2006-05-12 16:15:46 +02:00
Wolfgang Denk
977b50f868
Minor cleanup.
2006-05-10 17:43:20 +02:00
Jon Loeliger
846c2d4a0e
Merge branch 'mpc86xx'
2006-05-10 09:43:21 -05:00
Haiying Wang
6cfea33477
Remove unneeded INIT_RAM_LOCK cache twiddling.
...
Correctly tracks r29 as global data pointer now.
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2006-05-10 09:38:06 -05:00
Jon Loeliger
d4dd317b58
Remove unnecessary flash.c file.
2006-05-10 09:33:07 -05:00
Stefan Roese
d1dd22f92e
OMAP 5912/OSK: update EMIFS CS1 timings:
...
Problems have been seen in the linux kernel's smc91x network driver
due to improper bus timings. The latest 2.6 OMAP kernels currently
have a workaround, but this fix belongs in u-boot.
Patch by Kevin Hilman, 13 Oct 2005
2006-05-10 11:49:37 +02:00
Stefan Roese
77f633425b
Fix REG_MPU_LOAD_TIMER definition in multiple OMAP ports
...
Patch by Hiroki Kaminaga, 11 Mar 2006
2006-05-10 11:28:48 +02:00
Stefan Roese
6080a0eb63
Update omap5912osk board support
...
- Fix OMAP support that omap5912osk compiles in current source tree
- Update with code from "http://omap.spectrumdigital.com/osk5912 "
to fix problems with DDR initialization
- Fix timer setup
- Use CFI flash driver and support complete 32MB of onboard flash
- Add "print_cpuinfo()" and "checkboard()" functions to display
CPU (with frequency) and Board infos
Patch by Stefan Roese, 10 May 2006
2006-05-10 10:55:16 +02:00
Jon Loeliger
a67255363a
Merge branch 'mpc86xx'
2006-05-09 08:33:11 -05:00
Jon Loeliger
18b6c8cd8a
Get MPC8641HPCN flash images working.
...
Enable the CFI driver.
Remove bogus LAWBAR7 cruft.
Use correct TEXT_BASE, Fixup load script.
Enable SPD EEPROM during DDR setup.
Use generic RFC 1918 IP addresses by default.
2006-05-09 08:23:49 -05:00
Wolfgang Denk
1cfefe8cb6
Merge with /home/m8/git/u-boot
2006-05-09 13:46:55 +02:00
Marian Balakowicz
78b123cd69
Add M5271EVB board support.
2006-05-09 11:54:44 +02:00
Marian Balakowicz
483a0cf804
Fixes for gcc 3.4 based m68k toolchain,
...
based on patch by Jate Sujjavanich.
2006-05-09 11:28:36 +02:00
Wolfgang Denk
0cf7d8aa0b
Merge with git://git.kernel.org/pub/scm/boot/u-boot/galak/u-boot.git#mpc8349emds
2006-05-03 17:52:20 +02:00
Heiko Schocher
cb0fdf3cfa
VoiceBlue update: use new MTD flash partitioning methods, use more
...
reasonable TEXT_BASE, update default environment and enable keyed
autoboot.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2006-05-03 08:34:03 +02:00
Wolfgang Denk
610cf3676e
Coding Style cleanup
2006-05-03 01:24:04 +02:00
Marian Balakowicz
7a635e004e
Add support for Freescale M5271: Merge with /work/u-boot.mcf5271
2006-04-27 19:12:19 +02:00
Jon Loeliger
5c9efb36a6
Cleanup whitespaces and style issues.
...
Removed //-style comments.
Use 80-column lines.
Remove trailing whitespace.
Remove dead code and debug cruft.
2006-04-27 10:15:16 -05:00
Jon Loeliger
debb7354d1
Initial support for MPC8641 HPCN board.
2006-04-26 17:58:56 -05:00
Heiko Schocher
0e0ef590b2
Add Altera Nios-II boards EP1C20, EP1S10 and EP1S40
...
Patch from Scott McNutt, 11 Aug 2005
2006-04-26 08:13:18 +02:00
Markus Klotzbuecher
7c93b2443c
NAND support for zylonite board + some minor cleanup.
2006-04-25 16:48:48 +02:00
Markus Klotzbuecher
71ae411a63
delta board: support for magic key detection and handling.
2006-04-25 10:03:01 +02:00
dzu@denx.de
6ca24c64a5
Add support for BC3450 board
...
Signed-off-by: dzu@denx.de <dzu@denx.de>
2006-04-21 18:30:47 +02:00
Kumar Gala
8fe9bf61ef
Merged MPC8349ADS and MPC8349EMDS ports into MPC8349EMDS port:
...
- Removed MPC8349ADS port
- Added PCI support to MPC8349ADS
- reworked memory map to allow mapping of all regions with BATs
Patch by Kumar Gala 20 Apr 2006
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-04-20 13:45:32 -05:00
Heiko Schocher
a83531bb62
* Update PK1C20 board for Nios-II 5.0
...
Patch from Scott McNutt, 11 Aug 2005
-Update base addresses for standard configuration
-Eliminate use of CACHE_BYPASS in board code
2006-04-20 12:57:43 +02:00
Heiko Schocher
9acb626fc1
Add MCF5282 support (without preloader)
...
relocate ichache_State to ram
u-boot can run from internal flash
Add EB+MCF-EV123 board support.
Add m68k Boards to MAKEALL
Patch from Jens Scharsig, 08 Aug 2005
2006-04-20 08:42:42 +02:00
dzu@denx.de
56a4a63c10
Added missing nand.c for NC650 board
...
Signed-off-by: dzu@denx.de <dzu@eddie.localdomain>
2006-04-19 15:27:11 +02:00
dzu@denx.de
a367d42640
Update for NC650 board. Add NC650 based CP850 configuration.
...
Signed-off-by: dzu@denx.de <dzu@denx.de>
2006-04-19 11:52:46 +02:00
Wolfgang Denk
cf48eb9abd
Some code cleanup
2006-04-16 10:51:58 +02:00
Wolfgang Denk
807522fc9a
Merge with /home/hs/U-Boot/u-boot-dev
2006-04-16 10:27:31 +02:00
Wolfgang Denk
b28a31ca02
Merge with /home/m8/git/u-boot
2006-04-12 12:26:32 +02:00
Heiko Schocher
ad88297e2f
* Fix dbau1x00 Board
...
- Fix dbau1x00 boards broken by dbau1550 patch
PLL:s were not set for boards other than 1550.
Flash CFI caused card to hang due to undefined CFG_FLASH_BANKS_LIST.
Default boot is now bootp for cards other than 1550.
Patch by Thomas Lange Aug 10 2005
2006-04-11 14:53:29 +02:00
Marian Balakowicz
6db3970811
Fix JFFS2 support for legacy NAND driver.
...
Some more NAND cleanup and small fixes.
2006-04-08 19:08:06 +02:00
Wolfgang Denk
3a5e21881a
MCC200 Board: fix flash unprotection code for flash > 32 MB.
2006-04-06 15:03:42 +02:00
Wolfgang Denk
9bc97a3d91
Fix Lite500B support: Merge with /home/raj/git/u-boot.l5200b_pci
2006-04-06 10:42:23 +02:00
Wolfgang Denk
534ff676a9
* Add support for ymodem protocol download
...
Patch by Stefano Babic, 29 Mar 2006
* Memory Map Update for Delta board: U-Boot is at 0x80000000-0x84000000
Merge with /home/mk/8-benq/u-boot
2006-04-01 15:52:46 +02:00
Wolfgang Denk
d87080b721
GCC-4.x fixes: clean up global data pointer initialization for all boards.
2006-03-31 18:32:53 +02:00
Markus Klotzbuecher
9e7b5ce61b
delta board: one more DA9030 fix.
2006-03-30 17:00:39 +02:00
Markus Klotzbuecher
eeaab720f6
Change delta board memory map to start at 0x80000000.
2006-03-29 17:59:20 +02:00
Markus Klotzbuecher
89f2dfa4c3
delta board: minor update to DA9030 code.
2006-03-29 17:49:27 +02:00
Rafal Jaworowski
b66a938342
Set SDelay register in the DDR controller for the MPC5200B chip.
2006-03-29 13:17:09 +02:00
Markus Klotzbuecher
c855ef6768
delta board: fix DA9030 reset procedure.
2006-03-27 16:01:03 +02:00
Markus Klotzbuecher
2770bcb21c
Merge with http://www.denx.de/git/u-boot.git
2006-03-24 15:43:16 +01:00
Markus Klotzbuecher
ba70d6a417
delta board: DA9030 initialization and i2c support. Some minor changes to
...
make the pxa i2c driver work with the monahans cpu.
2006-03-24 12:23:27 +01:00
Markus Klotzbuecher
552fc624f2
Cleanup of the monahans cpu and delta board port.
2006-03-20 20:19:37 +01:00
Wolfgang Denk
0a112d8696
Merge with port of MPC8349EMDS board
2006-03-17 17:41:56 +01:00
Wolfgang Denk
09e4b0c5d3
Add support for Lite5200B board.
...
Patch by Patch by Jose Maria (Txema) Lopez, 16 Jan 2006
2006-03-17 11:42:53 +01:00
Rafal Jaworowski
dc9e499c62
Support for DDR with 32-data path. Addotional notes on injecting
...
multiple-bit errors.
2006-03-16 17:46:46 +01:00
Marian Balakowicz
d326f4a242
Add command for handling DDR ECC registers on MPC8349EE MDS board.
2006-03-16 15:19:35 +01:00
Marian Balakowicz
991425fe05
Add initial support for MPC8349E MDS board.
2006-03-14 16:24:38 +01:00
Wolfgang Denk
ff7fefe679
Apply SoC concept to arm926ejs CPUs, i.e. move the SoC specific timer and
...
cpu_reset code from cpu/$(CPU) into the new cpu/$(CPU)/$(SOC) directories
Patch by Andreas Engel, 13 Mar 2006
2006-03-13 12:37:35 +01:00
Wolfgang Denk
84c960ce6d
Add support for EmbeddedPlanet EP88x boards
...
Patch by Yuli Barcohen, 13 Jul 2005
2006-03-12 23:17:31 +01:00
Wolfgang Denk
763b5f34c3
Remove board specific configuration includes from the common xilinx
...
ethernet and iic adapter code.
Patch by Michael Libeskind, 12 Jul 2005
2006-03-12 23:13:27 +01:00
Wolfgang Denk
47705af5da
Merge with git://git.kernel.org/pub/scm/boot/u-boot/u-boot.git#mpc8349ads
2006-03-12 21:49:19 +01:00
Wolfgang Denk
8e7b703a62
Coding Style cleanup
2006-03-12 02:55:22 +01:00
Wolfgang Denk
6cb142fa3b
Add missing Blackfin files.
2006-03-12 02:12:27 +01:00
Wolfgang Denk
8ff0208d31
Switch MPC86xADS and MPC885ADS boards to use cpuclk environment
...
variable to set clock
Patch by Yuli Barcohen, 05 Jun 2005
2006-03-12 01:55:43 +01:00
Wolfgang Denk
aba9f1af60
Memory configuration changes for ZPC.1900 board
...
- Fix SDRAM timing on both local bus and 60x bus
- Add support for second flash bank (SIMM)
- Change boot flash base
Patch by Yuli Barcohen, 05 Jun 2005
2006-03-12 01:45:44 +01:00
Wolfgang Denk
5797b821dc
Add support for Adder boards with 16MB SDRAM;
...
add support for second FEC on Adder87x board.
Patch by Yuli Barcohen, 05 Jun 2005
2006-03-12 01:43:03 +01:00
Wolfgang Denk
84ef51a632
Fix cleanup for netstart board.
...
Remove build results from repository
2006-03-12 00:04:20 +01:00
Wolfgang Denk
d2ed2f661b
More GCC 4.x woes
2006-03-11 23:07:09 +01:00
Wolfgang Denk
8de7ed3abe
More GCC 4.x code cleanup
2006-03-11 22:56:07 +01:00
Wolfgang Denk
d52fb7e3d1
Some code cleanup for GCC 4.x
2006-03-11 22:53:33 +01:00
Wolfgang Denk
951a954b77
Merge with /home/wd/git/u-boot/master
...
Code cleanup.
2006-03-06 23:18:48 +01:00
Markus Klotzbcher
43638c674a
Cleanup of NAND support of delta board using the Monahans Data Flash
...
Controller.
2006-03-06 15:04:25 +01:00
Markus Klotzbcher
f9e029184b
NAND finally working. Two bugs fixed:
...
* For READ_STATUS and READID commands always 8 bytes need to be read from
NDDB. Otherwise they stay there and get send to flash as the first data
word when writing.
* In nand_base.c the oob variable is not reset so this->oob_buf is
overwritten what eventually screws up the bad block descriptor table.
2006-03-06 13:45:42 +01:00
Wolfgang Denk
bfc81252c0
Minor code cleanup
2006-03-06 13:03:37 +01:00
Wolfgang Denk
4e3ccd2692
Merge the new NAND code (testing-NAND brach); see doc/README.nand
...
Rewrite of NAND code based on what is in 2.6.12 Linux kernel
Patch by Ladislav Michl, 29 Jun 2005
[Merge with /home/tur/nand/u-boot]
2006-03-06 11:25:22 +01:00
Bartlomiej Sieka
addb2e1650
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
...
code and in SoC code). Boards using the old way have CFG_NAND_LEGACY and
BOARDLIBS = drivers/nand_legacy/libnand_legacy.a added. Build breakage for
NETTA.ERR and NETTA_ISDN - will go away when the new NAND support is
implemented for these boards.
2006-03-05 18:57:33 +01:00
Markus Klotzbcher
bf7cac033b
Lots of new stuff:
...
* Debug message can be turned on and off.
* Waiting for events now times out.
* Implemented RESET command.
* Added appropriate nand_bbt_descriptor and nand_oobinfo.
Remaining Problems:
* Read Status still behaves weird an returns invalid stuff sometimes.
* ECC Placement does not respect our scheme in nand_oobinfo.
2006-03-04 18:35:51 +01:00
Stefan Roese
f1ee982506
Add lowboot target to mcc200 board
...
Patch by Stefan Roese, 4 Mar 2006
2006-03-04 14:57:03 +01:00
Markus Klotzbcher
f8785e96c9
Erasing works too now. The CS don't care causes problem with READSTATUS,
...
don't ask me why. There are still bugs in the bad block logic.
2006-03-03 20:13:43 +01:00
Markus Klotzbcher
24e1217be3
Write operation is working. Turned out that the READSTATUS hack was wrong
...
after all.
2006-03-03 16:09:28 +01:00
Markus Klotzbcher
9187a35b6c
Writing is working, but there's still a bug that causes the data written to
...
start at an offset of 4 bytes from the start of the page.
2006-03-03 15:37:01 +01:00
Markus Klotzbcher
19fdeff433
Implemented writing, not working yet.
2006-03-03 12:11:11 +01:00
Markus Klotzbcher
e2053f9c7a
Moved the waiting loop for "Read Data Request" RDDREQ into the
...
delta_cmdfunc function, because this bit is only set once after a command
is sent and this allows read functions to be called multiple times.
2006-03-02 14:02:36 +01:00
Markus Klotzbcher
bb1ff049fb
Read bug fixed. Now "nand bad" list the badblocks correctly (i hope, since
...
there are 0)
2006-03-02 12:10:01 +01:00
Markus Klotzbcher
481911c78c
Further NAND stuff implemented. Basic read commands seem to work.
2006-03-01 23:33:27 +01:00
Stefan Roese
f18e874ad5
Fix problem with flash_get_size() from CFI driver update
...
Patch by Stefan Roese, 1 Mar 2006
2006-03-01 17:00:49 +01:00
Markus Klotzbcher
00c35bd214
Added GPIO initialization of DF signal. Still not working.
2006-02-28 22:51:01 +01:00
Markus Klotzbcher
6949328d7d
First steps implementing NAND support. Not working, fails to read ID.
2006-02-28 18:05:25 +01:00
Stefan Roese
58ad497833
Convert mcc200 to use common CFI flash driver
...
Patch by Stefan Roese, 28 Feb 2006
2006-02-28 15:33:28 +01:00
Stefan Roese
79b4cda076
Major CFI-FLASH driver update:
...
* Add env-variable "unlock" to handle initial state of sectors
(locked/unlocked).
Only the U-Boot image and it's environment is protected,
all other sectors are unprotected (unlocked) if flash
hardware protection is used (CFG_FLASH_PROTECTION) and
the environment variable "unlock" is set to "yes".
Patch by Stefan Roese, 28 Feb 2006
* Update drivers/cfi_flash.c:
- find_sector() called in both versions of flash_write_cfiword()
Patch by Peter Pearse, 27th Feb 2006
* CFI support for a x8/x16 AMD/Spansion flash configured in x8 mode
Patch by Jose Maria Lopez, 16 Jan 2006
* Add support for AMD/Spansion Flashes in flash_write_cfibuffer
Patch by Alex Bastos and Thomas Schaefer, 2005-08-29
* Changes/fixes for drivers/cfi_flash.c:
We *should* check if there are any error bits if the previous call
returned ERR_OK (Otherwise we will have output an error message in
flash_status_check() already.) The original code would only check for
error bits if flash_status_check() returns ERR_TIMEOUT.
Patch by Marcus Hall, 23 Aug 2005
* Changes/fixes for drivers/cfi_flash.c:
- Add CFG_FLASH_PROTECT_CLEAR on drivers/cfi_flash.c
- Prohibit buffer write when buffer_size is 1 on drivers/cfi_flash.c
Patch by Sangmoon Kim, 19 Aug 2005
* Fixes for drivers/cfi_flash.c:
- Fix wrong timeout value usage in flash_status_check()
- Round write_tout up when converting to msec in flash_get_size()
- Remove clearing flash status at the end of flash_write_cfibuffer()
which sets Intel 28F640J3 flash back to command mode on CSB472
Patch by Tolunay Orkun, 02 July 2005
2006-02-28 15:29:58 +01:00
Markus Klotzbcher
0377dca227
Merge /home/tur/nand/u-boot/
...
This is a first version of the testing-NAND branch merged back to main.
2006-02-24 14:16:31 +01:00
Markus Klotzbcher
7d4d1ce48c
Merge branch 'master' of http://www.denx.de/git/u-boot
2006-02-24 11:34:34 +01:00
Bartlomiej Sieka
038ccac511
Merge with /home/wd/git/u-boot/testing-NAND/ to add new NAND handling.
2006-02-24 09:37:22 +01:00
Wolfgang Denk
c81eb1f5f5
Cleanup MCC200 board.
2006-02-24 01:42:40 +01:00
Markus Klotzbcher
599f52253a
SDRAM now working.
2006-02-22 17:48:43 +01:00
Markus Klotzbcher
ff3c2a9478
SDRAM now working for delta board, but there are still aliasing problems,
...
we only see 64MB.
2006-02-22 14:05:44 +01:00
Wolfgang Denk
86ea5f93d7
Initial port to MCC200 board (work in progress)
...
Minimally modified patch by Bluetechnix, Vienna
2006-02-22 00:43:16 +01:00
Markus Klotzbcher
48b6242aa1
SDRAM seems to be working on delta board, though u-boot doesn't start yet.
2006-02-22 00:06:01 +01:00
Markus Klotzbcher
4f7a0e3671
New board directory and config for the benq delta board (copied from
...
zylonite). Minor pxa-regs.h update.
2006-02-20 16:37:37 +01:00
Markus Klotzbcher
b3c36e6b94
basic u-boot is working, boots into the command shell.
2006-02-09 13:19:25 +01:00
Markus Klotzbcher
9d803d8c0b
Changes:
...
* lots of bugfixes in the assembler code
* reverted hardware.h back to original
* enabled hardware DRAM calibration
* GCC-4 fix: modified GLOBAL_DATA_POINTER macro
2006-02-08 18:56:28 +01:00
Stefan Roese
79830d591a
Convert CPCI750 to use common CFI flash driver
...
Patch by Reinhard Arlt, 8 Feb 2006
2006-02-08 15:54:15 +01:00
Markus Klotzbcher
af646e865f
Forgot to add files to zylonite branch.
2006-02-07 20:48:45 +01:00
Stefan Roese
48a05a5188
Various changes to esd HH405 board specific files
...
Patch by Matthias Fuchs, 07 Feb 2006
2006-02-07 16:51:04 +01:00
Zachary P. Landau
3a108ed868
Add support for r5200 board
2006-01-26 17:37:59 -05:00
Stefan Roese
18c5e64c5b
Fix various compiler warnings on ppc4xx builds (ELDK 4.0)
...
Patch by Stefan Roese, 18 Jan 2006
2006-01-18 20:06:44 +01:00
Stefan Roese
a7b9fb9110
Add VGA support (CT69000) to CPCI750 board.
...
Insert missing __le32_to_cpu() for filesize in ext2fs_read_file().
Patch by Reinhard Arlt, 30 Dec 2005
2006-01-18 20:05:34 +01:00
Stefan Roese
2076d0a15f
PMC405 and CPCI405: Moved configuration of pci resources into config file.
...
PMC405 and CPCI2DP: Added firmware download and booting via pci.
Patch by Matthias Fuchs, 20 Dec 2005
2006-01-18 20:03:15 +01:00
Wolfgang Denk
c4b465f63e
Fix 28F256J3A support on PM520 board
...
(without bank-switching only 32 MB can be accessed)
2006-01-13 17:00:56 +01:00
Kumar Gala
86902b8e36
Added PCI support for MPC8349ADS board
...
Patch by Kumar Gala 11 Jan 2006
2006-01-12 19:51:38 -06:00
Wolfgang Denk
c7428d49ac
Add support for 28F256J3A flah (=> 64 MB) on PM520 board
2005-12-29 15:12:09 +01:00
Wolfgang Denk
27e166b875
Fix compiler problem with at91rm9200dk board.
...
Patch by Eugen Bigz, 19 Dec 2005
2005-12-19 13:02:45 +01:00
Stefan Roese
81a3170b15
Changes to Yellowstone & Yosemite 440EP/GR eval boards:
...
- Changed GPIO setup to enable another address line in order to
address 64M of FLASH.
- Added function sdram_tr1_set to auto calculate the tr1 value for
the DDR.
Patch by Steven Blakeslee, 12 Dec 2005
2005-12-15 09:43:12 +01:00
Wolfgang Denk
7481266e4e
2005-12-12 16:06:05 +01:00
Wolfgang Denk
f013dacf0a
Code cleanup, especially MIPS for GCC 4.x
2005-12-04 00:40:34 +01:00
Stefan Roese
d96f41e016
Add support for TQM8541/8555 boards, TQM85xx support reworked:
...
- Support for TQM8541/8555 boards added.
- Complete rework of TQM8540/8560 support.
- Common TQM85xx code now supports all current TQM85xx platforms
(TQM8540/8541/8555/8560).
- DDR SDRAM size detection added.
- CAS latency default values can be overwritten by setting "serial#"
to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used.
If problems are detected with this non default CAS latency,
the defualt values will be used instead.
- FLASH size detection added.
- Moved FCC ethernet driver initialization behind TSEC driver init
-> TSEC is first device.
Patch by Stefan Roese, 30 Nov 2005
2005-11-30 13:06:40 +01:00
Stefan Roese
6e7fb6eaa5
Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board.
...
Patch by John Otken, 23 Nov 2005
2005-11-29 18:18:21 +01:00
Stefan Roese
1178a412d2
Minor AMCC 4xx board cleanups
...
Patch by Stefan Roese, 27 Nov 2005
2005-11-29 18:17:41 +01:00
Stefan Roese
3d9569b232
Changed PPC44x startup message (cpu info, speed...) to common style:
...
On PPC44x platforms, the startup message generated in "cpu.c" only
comprised the ppc type and revision but not additional informations
like speed etc. Those speed infos where printed in the board specific
code. This new implementation now prints all CPU infos in the common
cpu specific code. No board specific code is needed anymore and
therefore removed from all current 44x implementations.
Patch by Stefan Roese, 27 Nov 2005
2005-11-27 19:36:26 +01:00
Stefan Roese
5568e613ee
Add support for Prodrive P3P440 board:
...
- Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c
- CFG_FLASH_QUIET_TEST added to use the common CFI driver
for bank autodetection
Patch by Stefan Roese, 22 Nov 2005
2005-11-22 13:20:42 +01:00
Wolfgang Denk
fe126d8b34
Change all '$(...)' variable references into '${...}'
...
which makes the environment compatible with the hush shell.
WARNING: Support for the old '$(...)' syntax will be
discontinued in a later version.
2005-11-20 21:40:11 +01:00
Rafal Jaworowski
5a164c8ca9
Minor changes to init flags in TQM834x PCI.
2005-11-17 00:26:18 +01:00
Stefan Roese
c7911c7e8f
Merge with /server/home/stefan/git/u-boot/bamboo-sdram
2005-11-15 16:23:41 +01:00
Stefan Roese
fd49bf0214
Fix Bamboo DDR SDRAM initialization (problem with onboard SDRAM)
...
Patch by Stefan Roese, 15 Nov 2005
2005-11-15 16:04:58 +01:00
Stefan Roese
feaedfcf84
New PPC 405EP board added: CMS700
...
Added CONFIG_NET_MULTI for VOM405 board.
Added reset_phy() for VOM405 board.
Patch by Matthias Fuchs, 09 Nov 2005
2005-11-15 10:35:59 +01:00
Stefan Roese
ea339205a9
Updated PCI mapping for esd CPCI2DP board.
...
Add support for error LED.
Patch by Matthias Fuchs, 07 Nov 2005
2005-11-08 09:00:09 +01:00
Stefan Roese
f190c11b1f
Adjust bd->bi_flashstart on Yellowstone & Yosemite to correct size
...
Patch by Stefan Roese, 05 Nov 2005
2005-11-05 15:50:16 +01:00
Stefan Roese
ef04a0aa26
Additional fix for external IRQ config on Yellowstone & Yosemite
...
Patch by Stefan Roese, 03 Nov 2005
2005-11-03 08:31:33 +01:00
Stefan Roese
57275b69c6
Add support for Ocotea pass 3 with 440GX Rev. F
...
Patch by Stefan Roese, 01 Nov 2005
2005-11-01 10:08:03 +01:00
Stefan Roese
d9f2f5008c
Merge with /git/u-boot.git
2005-11-01 10:02:21 +01:00
Wolfgang Denk
5d4ee51061
Merge with /home/m8/git/u-boot
2005-10-29 23:45:04 +02:00
Marian Balakowicz
63ff004c4f
Add support for multiple PHYs.
2005-10-28 22:30:33 +02:00
Marian Balakowicz
170d5e6d4c
Fix conflicting types (flash_write()) in trab auto_update.c
2005-10-28 15:29:43 +02:00
Stefan Roese
e190290ba4
Fix external IRQ configuration on Yellowstone & Yosemite
...
The multiplexed signals Ext IRQ0...3 have to be configured as IRQ,
because they default to GPIOx (440EP/GR).
Patch by Stefan Roese, 28 Oct 2005
2005-10-28 12:21:06 +02:00
Wolfgang Denk
7b5cac0e19
Merge with /home/wd/git/u-boot/master
2005-10-21 22:41:25 +02:00
Stefan Roese
a547775bac
Fix conflicting types (flash_write()) in esd auto_update.c
...
Patch by Stefan Roese, 20 Oct 2005
2005-10-20 16:39:16 +02:00
Rafal Jaworowski
6902df56a0
Add PCI support for the TQM834x board.
2005-10-17 02:39:53 +02:00
Wolfgang Denk
84bd92bdda
Merge with /home/m8/git/u-boot
2005-10-15 18:23:43 +02:00
Wolfgang Denk
77ddac9480
Cleanup for GCC-4.x
2005-10-13 16:45:02 +02:00
Wolfgang Denk
814d98f24e
Add missing files for Pantelis Antoniou's patch
...
Patch by Pantelis Antoniou, 04 Sep 2005
2005-10-13 01:59:29 +02:00
Wolfgang Denk
cbdf8824fa
Merge with /home/sr/git/u-boot
2005-10-13 01:55:58 +02:00
Wolfgang Denk
b604a40b4f
Cleanup
2005-10-13 01:50:05 +02:00
Wolfgang Denk
070610c529
Add support for OF flat tree for the STXtc board.
...
Patch by Pantelis Antoniou, 04 Sep 2005
2005-10-13 01:49:09 +02:00
Wolfgang Denk
f57f70aab9
Support passing of OF flat trees to the kernel.
...
Patch by Pantelis Antoniou, 04 Sep 2005
2005-10-13 01:45:54 +02:00
Marian Balakowicz
e6f2e90233
Added support for TQM834x boards.
2005-10-11 19:09:42 +02:00
Wolfgang Denk
3df5bea0b0
Add support for NetSilicon NS7520 processor.
...
Patch by Art Shipkowski, 12 May 2005
Cleanup.
2005-10-09 01:41:48 +02:00
Wolfgang Denk
7521af1c7d
Add support for AP1000 board.
...
Patch by James MacAulay, 07 Oct 2005
2005-10-09 01:04:33 +02:00
Wolfgang Denk
95f9dda216
Eliminate hard-coded address of Ethernet transfer buffer on at91rm9200
...
Patch by Anders Larsen, 07 Oct 2005
The Atmel errata #11 states that the transfer buffer descriptor
table must be aligned on a 16-word boundary. As it turned out, this
is insufficient - it seems the table must be aligned on a boundary
at least as large as the table itself (in Linux this is not an
issue - the table is aligned on a PAGE_SIZE (4096) boundary).
2005-10-09 00:33:37 +02:00
Wolfgang Denk
96782c63d3
Cleanup warnings for cpu/arm720t & cpu/arm1136 files.
...
sed the linker scripts, rather than pre-process them.
Patch by Peter Pearse, 07 Oct 2005
2005-10-09 00:22:48 +02:00
Stefan Roese
c29ab9d71d
Fix gzip bmp support (test if malloc fails, warning when truncated).
...
Increase CFG_VIDEO_LOGO_MAX_SIZE on HH405 board.
Patch by Stefan Roese, 08 Oct 2005
2005-10-08 10:19:07 +02:00
Wolfgang Denk
b8e16a3450
Cleanup
2005-10-06 23:44:55 +02:00
Wolfgang Denk
64db4b10a5
Make "split_by_variant.sh" executable.
2005-10-06 17:09:56 +02:00
Wolfgang Denk
87cb6862b9
Update make target for ARM supported boards.
...
Use lowlevel_init() instead of platformsetup() [rename].
Patch by Peter Pearse, 06 Oct 2005
2005-10-06 17:08:18 +02:00
Wolfgang Denk
f5c254d719
Fix the machine-id of the Cogent csb637 board
...
Patch by Anders Larsen, 05 Oct 2005
2005-10-06 01:26:16 +02:00
Wolfgang Denk
645da51097
Add support for Cogent csb637
...
Patch by Anders Larsen, 29 Apr 2005
2005-10-05 02:00:09 +02:00
Wolfgang Denk
080bdb7f3a
* Move dm9161.c and lxt972.c into cpu/arm920t/at91rm9200
...
Patch by Anders Larsen, 29 Apr 2005
* Fix problems introduced by Patch by Steven Scholz, 02 Mar 2005
(8e2be51de8
)
2005-10-05 01:51:29 +02:00
Wolfgang Denk
99b0d2851a
Added support for KwikByte KB920x boards (based on AT91RM9200)
...
Patch by Matt ?? <kb9200_dev@kwikbyte.com>, 27 Apr 2005
2005-10-05 00:19:34 +02:00
Wolfgang Denk
45237bc00b
Add support for S29GL064M-R3 flash chip on xsengine board
...
Patch by Kurt Stremerch, 18 Apr 2005
2005-10-05 00:03:55 +02:00
Wolfgang Denk
9b880bd4d8
Update ARM Integrator boards:
...
Correct addessing errors in platform files.
Split off common core module data from Integrator header files to
include/armcoremodule.h.
Patch by Peter Pearse, 04 Oct 2005
2005-10-04 23:10:28 +02:00
Stefan Roese
93b17ec382
Change board message on AMCC Yosemite & Yellowstone to common style
...
Patch by Stefan Roese, 3 Oct 2005
2005-10-03 15:27:50 +02:00
Stefan Roese
2c7b2ab5a0
Fix problem with SM501 init on HH405 board.
...
Patch by Stefan Roese, 30 Sep 2005
2005-09-30 16:41:12 +02:00
Wolfgang Denk
0e4018d244
Add support for MP2USB board.
...
Patch by Eric Benard, 07 Apr 2005
2005-09-26 01:14:38 +02:00
Wolfgang Denk
c570b2fdf5
Add board support for armadillo HT1070
...
Patch by Rowel Atienza, 06 Apr 2005
2005-09-26 01:06:33 +02:00
Wolfgang Denk
8e6f1a8ec2
Add Barco Streaming Video Card (SVC) and Sample Compress Network (SCN) board
...
Patch by Marc Leeman, 04 Mar 2005
2005-09-25 18:59:36 +02:00
Wolfgang Denk
716c1dcb41
Cleanup
2005-09-25 18:49:35 +02:00
Wolfgang Denk
49a7581c6c
OMAP242x H4 board update
...
- fix for ES2 differences.
- switch to using the cfi_flash driver.
- fix SRAM build address.
- fix for GP device operation.
- unlock SRAM for GP devices.
- display more device information.
- fix potential deadlock in omap24xx_i2c driver.
- fix DLL load values to match dpllout*1 operation.
- fix 2nd chip select init for combo DDR device.
- add support for CFI Intel 28F256L18 on H4 board.
Patch by Richard Woodruff, 03 Mar 2005
2005-09-25 18:41:04 +02:00
Wolfgang Denk
c177bb5f6c
Fix VOH405 Support
...
Patch by Matthias Fuchs, 25 Sep 2005
2005-09-25 16:31:16 +02:00
Wolfgang Denk
1972dc0a9e
Added support for PCI bridge on MPC8272ADS
...
Patch by Vitaly Bordug, Feb 09 2005
2005-09-25 16:27:55 +02:00
Wolfgang Denk
0148e8cb43
Update multicore CM9XX support for Integrator AP to allow booting from flash
...
Patch by Jean-Paul Saman, 8 Feb 2005
2005-09-25 16:22:14 +02:00
Wolfgang Denk
70a2047ff6
Add Vibren (was Accelent) PXA255 IDP Support
...
Patch by Cliff Brake, 04 Feb 2005
2005-09-25 15:59:01 +02:00
Wolfgang Denk
fe7eb5d88b
Cleanup
2005-09-25 02:00:47 +02:00
Wolfgang Denk
74f4304ee7
Add ARM946E cpu and core module targets; remap memory to 0x00000000
...
Patch by Peter Pearse, 2 Feb 2005
2005-09-25 01:48:28 +02:00
Wolfgang Denk
c97a2aaf27
OMAP242x fix for GP device booting
...
- Add SRAM unlock for GP devices.
- Change DDR DLL unlock value to allow DPLLout*1 operation.
Patches by Richard Woodruff, 21 Jan 2005:
2005-09-25 00:59:24 +02:00
Wolfgang Denk
265817c7e6
Add support for AMD's Pb1x00 eval board;
...
add MII routines to the au1x00 ethernet driver;
add USB ohci driver (work in progress)
Patch by Thomas Sailer, 20 Jan 2005
2005-09-25 00:53:22 +02:00
Wolfgang Denk
b63de2c053
Update omap5912osk board:
...
Use drivers/cfi_flash.c instead of private flash driver;
Remove hardcoded personalized settings from omap5912osk.h;
Fix spacing with (RO) marks in 'flinfo' output.
Patch by Michael Bendzick, 14 Jan 2005
2005-09-25 00:23:05 +02:00
Wolfgang Denk
3706ba1a36
Fix warnings for PCI code on ixp
...
Patch by Joe <lgxue@yahoo.com>, 13 Jan 2005
2005-09-25 00:00:45 +02:00
Wolfgang Denk
2b792afcc5
* Fix PHY address argument passing with mii info command
...
Patch by Andrew Dyer, 28 Dec 2004
* Cleanup: fix broken builds
2005-09-24 21:54:50 +02:00
Wolfgang Denk
9ea4b5886a
More cleanup: get rid or redundand #defines
2005-09-23 13:12:15 +02:00
Wolfgang Denk
0c8721a466
Cleanup (PPC4xx is AMCC now)
2005-09-23 11:05:55 +02:00
Wolfgang Denk
a6e6cf0036
Merge with /home/wd/git/u-boot/work
2005-09-22 09:46:19 +02:00
Stefan Roese
7644f16f6b
esd CPCI2DP board added
...
Patch by Matthias Fuchs, 22 Sep 2005
2005-09-22 09:16:57 +02:00
Stefan Roese
026cb5d864
esd PMC405 board updated
...
Patch by Matthias Fuchs, 22 Sep 2005
2005-09-22 09:07:15 +02:00
Stefan Roese
98f4a3dfcb
Add SM501 support to HH405 board.
...
Add support for gzip compressed bmp's (CONFIG_VIDEO_BMP_GZIP).
Add support for eeprom write-enable (CFG_EEPROM_WREN).
Patch by Stefan Roese, 22 Sep 2005
2005-09-22 09:04:17 +02:00
Wolfgang Denk
8b4c9e7c14
Fix bug in auto_update (trab board)
...
Patch by Martin Krause, 16 Sep 2005
2005-09-21 15:31:25 +02:00
Stefan Roese
34c0a5e98b
Update AMCC Yosemite to get a consistent setup for all AMCC eval
...
boards (baudrate, environment...). Flash driver fixed.
Patch by Stefan Roese, 15 Sep 2005
2005-09-15 11:34:07 +02:00
Wolfgang Denk
ac7eb8a315
Update of new NAND code
...
Patch by Ladislav Michl, 13 Sep 2005
2005-09-14 23:53:32 +02:00
Wolfgang Denk
5d244ea128
Merge with /home/sr/git/u-boot:
...
Add I2C support for TQM85xx
2005-09-06 22:17:16 +02:00
Wolfgang Denk
6d51e505ad
Cleanup compiler warnings.
2005-09-03 01:58:35 +02:00
Stefan Roese
9d2a873bdf
Add I2C support to TQM8540 and TQM8560 boards (EEPROM, RTC, LM75-DTT).
...
Removed CFG_CMD_DISPLAY from default commands.
Fixed compiler warning in net.c.
Patch by Stefan Roese, 31 Aug 2005
2005-08-31 12:55:50 +02:00
Wolfgang Denk
807d5d7319
Fix problems with ld version 2.16 (dot outside sections problem)
...
Pointed out by Gerhard Jaeger, 31 Aug 2005;
cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html
2005-08-31 12:28:00 +02:00
Wolfgang Denk
9f96ae44c6
Add keyboard and dot matrix display support for HMI1001 board.
2005-08-30 13:04:12 +02:00
Wolfgang Denk
ec2e5a2cce
Merge with testing-4xx_enet (Create generic 4xx Ethernet code)
2005-08-23 23:03:20 +02:00
Stefan Roese
5e4b3361bc
Add esd cpci5200 and pf5200 boards
...
Patch by Reinhard Arlt, 22 Aug 2005
2005-08-22 17:51:53 +02:00
Wolfgang Denk
c7db9a3805
Initialize serial# and ethaddr from manufacturer data in EEPROM on CMC-PU2
...
Patch by Martin Krause, 08 Jun 2005
2005-08-19 00:53:02 +02:00
Wolfgang Denk
6617aae9b9
Add new board specific commands for TQM5200/STK52XX
...
- Sound commands (beep, wav, sound)
- Test commands (led, can, backlight, rs232)
Patch by Martin Krause, 02 May 2005
2005-08-19 00:46:54 +02:00
Wolfgang Denk
601aed1e8f
Add automatic HW detection for another CMC_PU2 variant
...
Patch by Martin Krause, 20 Apr 2005
2005-08-19 00:08:55 +02:00
Wolfgang Denk
e8aa824eb2
Fix initialization problem on TQM5200 without SM501
...
Patch by Martin Krause, 8 Apr. 2005
2005-08-18 11:55:22 +02:00
Stefan Roese
d6c61aabc4
Merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.c
...
now handling all 4xx cpu's.
Patch by Stefan Roese, 16 Aug 2005
2005-08-16 18:18:00 +02:00
22e05df45c
Merge with pollux.denx.org:/home/git/u-boot/.git
2005-08-16 17:34:22 +02:00
Wolfgang Denk
98128f389c
Enable PCI on hmi1001 board
2005-08-16 15:17:53 +02:00
Wolfgang Denk
3d078ce6d7
Coding style cleanup
2005-08-15 16:03:56 +02:00
Wolfgang Denk
6bdf430660
Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board.
...
Patch by Dan Malek and Pantelis Antoniou, 15 Aug 2005
2005-08-15 15:55:00 +02:00
Stefan Roese
b79316f2a2
Add Sandburst Metrobox and Sandburst Karef board support packages.
...
Second serial port on 440GX now defined as a system device.
Add 'Short Etch' code for Cicada PHY within 440gx_enet.c
Patch by Travis B. Sawyer, 12 Jul 2005
Check return value of malloc in 440gx_enet.c
Patch by Travis B. Sawyer, 18 Jul 2005
2005-08-15 12:31:23 +02:00
Wolfgang Denk
5ad2af341d
Code cleanup.
2005-08-13 23:13:17 +02:00
Wolfgang Denk
90e4e78365
Remove stale file entry
2005-08-12 23:51:07 +02:00
Wolfgang Denk
b2f508075c
Minor code cleanup
2005-08-12 23:43:12 +02:00
Wolfgang Denk
50814844e4
Add forgotten new fils from latest VoiceBlue update
2005-08-12 23:36:08 +02:00
Wolfgang Denk
b3b0fd552e
Fix Murray Jensen's mail address.
...
Patch by Murray Jensen, 30 Jun 2005
2005-08-12 23:20:59 +02:00
Wolfgang Denk
e544528831
VoiceBlue update: eeprom tool can also store firmware version now.
...
eeprom.bin is runable by jumping at load address.
Patch by Ladislav Michl, 23 May 2005
2005-08-12 22:56:51 +02:00
Stefan Roese
5315dfa9d1
esd PCI405 board updated
...
Patch by Matthias Fuchs, 28 Jul 2005
2005-08-12 16:56:56 +02:00
Stefan Roese
82f4c6ac84
esd WUH405 and DU405 board updated
...
Patch by Matthias Fuchs, 27 Jul 2005
2005-08-12 16:52:47 +02:00
6df6d38d2d
Merge with pollux.denx.org:/home/git/u-boot/.git
2005-08-12 15:33:33 +02:00
Wolfgang Denk
dafba16e6f
Merge with /home/wd/git/u-boot/master
2005-08-12 00:22:49 +02:00
Stefan Roese
84286386a8
Update AMCC Yosemite to get a consistent setup for all AMCC eval
...
boards (baudrate, environment...). Flash driver fixed.
Patch by Stefan Roese, 11 Aug 2005
2005-08-11 18:03:14 +02:00
Stefan Roese
c57c7980ff
Add NAND FLASH support for AMCC Bamboo 440EP eval board
...
Patch by Stefan Roese, 11 Aug 2005
2005-08-11 17:56:56 +02:00
adac376ef2
O2DNT: added hardware flash protect support, macros cleanup.
2005-08-11 10:10:30 +02:00
Wolfgang Denk
8f79e4c2da
Add configuration for IFM AEV FIFO board.
...
Minor coding style cleanup.
2005-08-10 15:14:32 +02:00
0841565cc7
O2DNT platform specific code.
2005-08-09 14:52:00 +02:00
Wolfgang Denk
700a0c648d
Add common (with Linux) MTD partition scheme and "mtdparts" command
...
Old, obsolete and duplicated code was cleaned up and replace by the
new partitioning method. There are two possible approaches now:
* define a single, static partition
* use mtdparts command line option and dynamic partitioning
Default is static partitioning.
2005-08-08 01:03:24 +02:00
Wolfgang Denk
452e8e72ad
Fix build problems for PM856 Board
2005-08-08 00:47:14 +02:00
Wolfgang Denk
d06a5f7ebf
Add support for Altera NIOS DK1C20 board
...
Patch by Shlomo Kut, 13 Dec 2004
2005-08-06 01:56:59 +02:00
Wolfgang Denk
f901a83b70
Add support for ep8248 board
...
Patch by Yuli Barcohen, 12 Dec 2004
Minor code cleanup.
2005-08-06 01:42:58 +02:00
Wolfgang Denk
d56019c0ee
Merge with /home/sr/git/u-boot
2005-08-05 23:55:19 +02:00