Commit Graph

998 Commits

Author SHA1 Message Date
Horatiu Vultur
d1182056d3 MSCC: Add device tree for Jaguar2 board
Add device tree based on evaluation board pcb110.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-16 13:56:43 +01:00
Horatiu Vultur
051de9b3eb pinctrl: mscc: Add gpio and pinctrl for Jaguar2 SOC family
The Jaguar2 SOC family has 63 gpio pins therefore I extended mscc-common
to support new numbe of pins and remove any platform dependency from
mscc-common.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-16 13:56:43 +01:00
Lars Povlsen
fd6e0b0525 mips: spi: mscc: Add fast bitbang SPI driver
This patch add a new SPI driver for MSCC SOCs that does not sport the
designware SPI hardware controller.

Performance gain: 7.664 seconds vs. 17.633 for 1 Mbyte write.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-16 13:56:43 +01:00
Lars Povlsen
be8313feee mips: mscc_sgpio: Add the MSCC serial GPIO device (SIO)
This add support for the the MSCC serial GPIO driver in MSCC
VCoreIII-based SOCs.

By using a serial interface, the SIO controller significantly extends
the number of available GPIOs with a minimum number of additional pins
on the device. The primary purpose of the SIO controller is to connect
control signals from SFP modules and to act as an LED controller.

This adds the base driver.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2019-01-16 13:56:43 +01:00
Weijie Gao
d049ff9ca5 MAINTAINERS: ARM MEDIATEK: update file entries
This patch adds new file entries for MediaTek SoCs

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2019-01-14 17:43:18 -05:00
Peng Fan
d17b0bedbf MAINTAINERS: update NXP i.MX mail list address
Update NXP i.MX mail list address

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-01-09 17:02:17 +01:00
Paul Burton
cd71b1d5d2 mips: jz47xx: Add JZ4780 SoC support
Add initial support for the Ingenic JZ47xx MIPS SoC.

Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2018-12-19 15:23:01 +01:00
Gregory CLEMENT
f8c8cedd7a MSCC: add board support for the Luton based evaluation board
Adding the support for the Luton boards PCB91 which share common code with
the Ocelots boards, including board code, device tree and configuration.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19 15:23:01 +01:00
Gregory CLEMENT
6787c1ece0 MSCC: add board support for the Ocelots based evaluation boards
Adding the support for 2 boards sharing common code for Ocelot chip:
PCB120 and PCB123

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19 15:23:01 +01:00
Gregory CLEMENT
dd1033e4e0 MSCC: add support for Ocelot SoCs
This family of SoCs are found in the Microsemi Switches solution and have
already a support in the linux kernel.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19 15:23:01 +01:00
Otavio Salvador
80870e2a66 tools: add a generic config for native tools building
The motivation for this is to allow distributions to distribute all
possible tools in a generic way, avoiding the need of specific tools
building for each machine.

Especially on OpenEmbedded / Yocto Project ecosystem, it is very
common each BSP to end providing their specific tools when they need
to generate images for some SoC (e.g MX23 / MX28 in meta-freescale
case).

Using this, we can package the tools doing:

$: make tools-only_defconfig
$: make tools-only

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
[trini: Add MAINTAINERS entry for myself, add to .travis.yml, make
U-Boot itself buildable to not trip up other frameworks]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-12-15 11:49:56 -05:00
Simon Glass
bb48470df2 binman: Add myself as maintainer
Add an entry for my maintainership of this tool.

Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-05 06:06:44 -07:00
Heinrich Schuchardt
65fa17d417 MAINTAINERS: add EFI PAYLOAD reviewer
Alex suggested to add me as a reviewer for the EFI subsystem.
The patch also adds a description for R: entries.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-12-02 21:59:37 +01:00
Ryder Lee
a9da9eebf3 MAINTAINERS: add an entry for MediaTek
This patch adds an entry for MediaTek.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-28 23:04:54 -05:00
Patrick Delaunay
84ee59a5fd MAINTAINERS: Update stm32mp entry
Add mailing list for stm32mp architecture and board.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-11-09 10:44:50 -05:00
Peng Fan
0ea82ba2b0 MAINTAINERS: add NXP linux team maillist as i.MX reviewer
Add NXP linux team upstream maillist as reviewer

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-11-06 11:26:21 +01:00
Tom Rini
d0423c44f1 Merge git://git.denx.de/u-boot-microblaze
Xilinx changes for v2018.11-rc2-v2

FPGA:
- Fix SPL fpga loading from FIT

ARM64:
- Fix gic accesses in EL2/EL1

Xilinx:
- Add dlc20 board support
- Add Versal board support
- Sync defconfigs
- Enable MP via Kconfig
- Add missing efuse node
- Enable CDC for zcu100

cmd:
- Fix kgdb Kconfig dependency
2018-10-16 13:57:23 -04:00
Michal Simek
ec48b6c991 arm64: versal: Add support for new Xilinx Versal ACAPs
Xilinx is introducing Versal, an adaptive compute acceleration platform
(ACAP), built on 7nm FinFET process technology. Versal ACAPs combine
Scalar Processing Engines, Adaptable Hardware Engines, and Intelligent
Engines with leading-edge memory and interfacing technologies to deliver
powerful heterogeneous acceleration for any application. The Versal AI
Core series has five devices, offering 128 to 400 AI Engines. The series
includes dual-core Arm Cortex™-A72 application processors, dual-core Arm
Cortex-R5 real-time processors, 256KB of on-chip memory with ECC, more
than 1,900 DSP engines optimized for high-precision floating point with
low latency.

The patch is adding necessary infrastructure in place without enabling
platform which is done in separate patch.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16 16:53:21 +02:00
Heiko Schocher
e3bc4bb861 i2c: fix: Add support for the Arm's Versatile Express I2C controller
accidentially while fixing merge errors for patch:
https://lists.denx.de/pipermail/u-boot/2018-September/342278.html

missed to add files:

MAINTAINERS
drivers/i2c/Kconfig
drivers/i2c/Makefile

add them with this patch.

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Liviu Dudau <liviu.dudau@foss.arm.com>
2018-10-12 07:25:39 +02:00
Jens Wiklander
1cc8cc4e67 tee: optee: support AVB trusted application
Adds configuration option OPTEE_TA_AVB and a header file describing the
interface to the Android Verified Boot 2.0 (AVB) trusted application
provided by OP-TEE.

Tested-by: Igor Opaniuk <igor.opaniuk@linaro.org>
Reviewed-by: Igor Opaniuk <igor.opaniuk@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-10-07 10:47:38 -04:00
Jens Wiklander
9ff4a31175 Add UCLASS_TEE for Trusted Execution Environment
Adds a uclass to interface with a TEE (Trusted Execution Environment).

A TEE driver is a driver that interfaces with a trusted OS running in
some secure environment, for example, TrustZone on ARM cpus, or a
separate secure co-processor etc.

The TEE subsystem can serve a TEE driver for a Global Platform compliant
TEE, but it's not limited to only Global Platform TEEs.

The over all design is based on the TEE subsystem in the Linux kernel,
tailored for U-Boot.

Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Igor Opaniuk <igor.opaniuk@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-10-07 10:47:38 -04:00
Liviu Dudau
0fabfeb2c7 misc: Add support for the Arm Versatile Express config bus
Add support for the Arm Versatile Express config bus that is
being used for exposing various subsystems via a generic
configuration bus. This driver adds support for generating
transactions on this configuration bus and can be used by
other drivers to abstract the communication with the actual
function providers.

Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2018-10-06 09:04:18 -04:00
Tom Rini
592cd5defd Merge branch 'master' of git://git.denx.de/u-boot-spi
This is the PR for SPI-NAND changes along with few spi changes.

[trini: Re-sync changes for ls1012afrwy_qspi*_defconfig]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-02 17:01:46 -04:00
Ramon Fried
92454e47bc phy: db410c: Add MSM USB PHY driver
Add a PHY driver for the Qualcomm dragonboard 410c which
allows switching on/off and resetting the phy connected
to the EHCI controllers and USBHS controller.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-30 13:00:36 -04:00
Liviu Dudau
c1a65a8c59 video: Add support for Arm's Mali Display Processors
Add support for Arm Mali Display Processors DP500, DP550 and DP650.
Only one layer is being used to display the console or boot logo,
even if more layers are supported in the hardware.

Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com>
2018-09-28 19:11:44 +02:00
Liviu Dudau
055da186a1 video: Add support for NXP's TDA19988 HDMI encoder
Add support for the NXP TDA19988 HDMI encoder as used on the Juno
development board from Arm.

Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com>
2018-09-28 18:44:50 +02:00
Heinrich Schuchardt
9cdbc90672 MAINTAINERS: assign include/video*.h
The include/video*.h files are part of the drivers in drivers/video. So it
makes sense to assign them to the same maintainer.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-28 18:25:06 +02:00
Heinrich Schuchardt
0bc4b0da7b efi_loader: EFI_UNICODE_COLLATION_PROTOCOL
The patch implements the EFI_UNICODE_COLLATION_PROTOCOL.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
Heinrich Schuchardt
5b2118a2ad efi_loader: capitalization table
This patch provides a define to initialize a table that maps lower to
capital letters for Unicode code point 0x0000 - 0xffff.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
Heinrich Schuchardt
f11a164b58 test: unit tests for Unicode functions
Provide unit tests for Unicode functions.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23 21:55:29 +02:00
Miquel Raynal
a430fa06a4 mtd: move NAND files into a raw/ subdirectory
NAND flavors, like serial and parallel, have a lot in common and would
benefit to share code. Let's move raw (parallel) NAND specific code in a
raw/ subdirectory, to ease the addition of a core file in nand/ and the
introduction of a spi/ subdirectory specific to SPI NANDs.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-09-20 20:10:49 +05:30
Tom Rini
333279af23 Merge git://git.denx.de/u-boot-marvell
- Multiples updates to the turris boards / platform
- Changes / enhancements to the Marvell PHY drivers, mainly
  to support the turris platform
- Many fixes and enhancements to the pxa3xx NAND driver
- Fixes for the UART boot mode in kwboot
- Misc minor changes to other 32bit and 64bit boards
2018-09-19 20:35:05 -04:00
Marek Behún
4b8cb84327 phy: marvell: Support changing SERDES map in board file
This adds a weak definition of comphy_update_map to comphy_core,
which does nothing. If this function is defined elsewhere, for example
in board file, the board file can change some parameters of SERDES
configuration.

This is needed on Turris Mox, where the SERDES speed on lane 1 has to
be set differently when SFP module is connected and when Topaz Switch
module is connected.

This is a temporary solution. When the comphy driver for armada-3720
will be added to the kernel, the comphy driver in u-boot shall also be
updated and this should be done differently then.

Signed-off-by: Marek Behun <marek.behun@nic.cz>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-09-19 08:59:26 +02:00
Mario Six
d2166319df misc: Add MPC83xx serdes driver
Add a driver to configure the SerDes (Serializer/Deserializer) lanes on
the MPC83xx architecture.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-18 08:12:21 -06:00
Mario Six
19fbdca47b cpu: Add MPC83xx CPU driver
Add a CPU driver for the MPC83xx architecture.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-18 08:12:21 -06:00
Mario Six
2c21749d71 timer: Add MPC83xx timer driver
Add a timer driver for the MPC83xx architecture.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-18 00:01:18 -06:00
Mario Six
07d538d281 clk: Add MPC83xx clock driver
Add a clock driver for the MPC83xx architecture.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-18 00:01:18 -06:00
Mario Six
76fdad1f21 mpc83xx: Add sysreset driver
Add a sysreset driver for the MPC83xx platform.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-18 00:01:18 -06:00
Mario Six
e40615565d ram: Add driver for MPC83xx
Add a RAM driver for the MPC83xx architecture.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-18 00:01:18 -06:00
Tom Rini
89aa19d092 FPGA changes for v2018.11
- add fpga tests to cover fpga commands
 - fpga Kconfig cleanup
 - fix cmd/fpga.c
 - add support for missing fpga loadmk commands
 - add fpga fragment to MAINTAINERS
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAluXlcwACgkQykllyylKDCGqEQCgiqm9BBhYnLugEroL2b3FDUjX
 IfEAn2dPmCF5WfJsiQYXmtO25jiuyDU5
 =lsZ5
 -----END PGP SIGNATURE-----

Merge tag 'fpga-for-v2018.11' of git://git.denx.de/u-boot-microblaze

FPGA changes for v2018.11

- add fpga tests to cover fpga commands
- fpga Kconfig cleanup
- fix cmd/fpga.c
- add support for missing fpga loadmk commands
- add fpga fragment to MAINTAINERS
2018-09-11 08:49:21 -04:00
Lokesh Vutla
586bde93eb arm: K3: Add initial support for TI's K3 generation of SoCs
Add support for Texas Instruments' K3 Generation Processor
families.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-09-11 08:32:55 -04:00
Michal Simek
7e16342bde MAINTAINERS: Add myself as the FPGA maintainer
FPGA subsystem requires special care that's why it should be maintained
via one tree.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-11 11:00:54 +02:00
Thomas Fitzsimmons
3f20321ad8 board: arm: Add support for Broadcom BCM7260
Add support for loading U-Boot on the Broadcom 7260 SoC.  This port
assumes Broadcom's BOLT bootloader is acting as the second stage
bootloader, and U-Boot is acting as the third stage bootloader, loaded
as an ELF program by BOLT.

Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
2018-09-10 21:19:31 -04:00
Patrice Chotard
f65b82ffbe MAINTAINERS: Update STM32MP fragments
Add new drivers
Add Christophe Kerello and myself as maintainers

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-13 14:04:04 -04:00
Ramon Fried
ce18baf911 MAINTAINERS: Add more sources to Arch Snapdragon
Add scattered driver files around the source tree
that belongs to Snapdragon arch. Not sure why they
were not included in the first place.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-08-13 14:04:04 -04:00
Heinrich Schuchardt
0445978806 doc: add structure to Sphinx generated docs
Create separate html pages for linker lists, the serial subsystem,
and the EFI subsystem.

Add a table of content.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-08-10 13:45:32 -04:00
Michal Simek
2570e12960 arm64: zynqmp: Add support for Avnet Ultra96
Avnet Ultra96 is rebranded Xilinx zcu100 revC/D. Add new defconfig files
and point to origin internal board name.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-08-06 08:44:35 +02:00
Eugeniy Paltsev
7620ec4df6 CREG GPIO: add device tree bindings
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-07-31 07:49:47 +03:00
Tom Rini
406fd7e207 Patch queue for efi - 2018-07-25
Highlights this time:
 
   - Many small fixes to improve spec compatibility (found by SCT)
   - Almost enough to run with sandbox target
   - GetTime() improvements
   - Enable EFI_LOADER and HYP entry on ARMv7 with NONSEC=y
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJbWHUwAAoJECszeR4D/txgKlUP/3Lu6pxScwzL7TsSD6OFZQ6M
 qQq2FH89XOA6/3r04RXrJZoHwOKIH5uj7ea6FlitpS1sQ4UOCQhp/lJJuJennHHj
 +veeuzI1sKTCX8Kd9ptrZDEF3G8lbF/zSyCFa1MOd1ONDVsTgSO9fOGmiqcC9FBF
 UrUH7dzXlE2CWs/mv/UikCBI7rYF+NOFJNuwHVXfsW4PyQ/7uaNsa7Rl3mXYb/Lr
 gjdcJkeHZAmFv/r84tGS9AFv+m0So9AGEYD7MeQDt02hSOuH9/nu4HgPmiwln3Fn
 3sFA3+daMrlFNi6kFw10S0sjKz94nN+Arm6cIXlvGaoc/wnPM2wEcKOSiXhzVM8d
 CoP/26N/ETRoI9P01C2WyTrKjo0O0aFwp3ubfmmbdcaKr/pyjAJgb3BnqXBfAr7T
 OjsE086jtHzdyKYKXDIz8+ZxSo4VsiDjBzDK7LVA0L5KtqAFFa+OYjlgEMJnQCk3
 YJfj+rhxfpjzFI7x5BAgq0q3XQRvAJS8QcUq+V2todQ3JkUlCIaVUNQLWAfNJN0q
 ze/WR8l4nwj5YFo8XiEbFHpQi/1bkR6cSzyjlBKUqrtHUUEu32vWlzZpNi6HzPMq
 cP7gehboFlcCSr8T2UMjBTE1LWI35eWNQQoiNRrS2UVcTH9h1vXMFV9PT+I82BBl
 ivJ+YwF9nU1JdS8CG3n7
 =ePTT
 -----END PGP SIGNATURE-----

Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot

Patch queue for efi - 2018-07-25

Highlights this time:

  - Many small fixes to improve spec compatibility (found by SCT)
  - Almost enough to run with sandbox target
  - GetTime() improvements
  - Enable EFI_LOADER and HYP entry on ARMv7 with NONSEC=y
2018-07-30 16:02:29 -04:00
Tom Rini
9f8aba7a0d MAINTAINERS: Mark NAND as Orphaned
Scott is no longer maintaining the NAND subsystem, mark as orphaned for
now.

Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-26 15:49:29 -04:00
Heinrich Schuchardt
0b8a88ab6a MAINTAINERS: assign lib/charset.c
lib/charset.c is only used by the EFI subsystem.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-25 15:00:24 +02:00
Ramon Fried
654dd4a84e soc: qualcomm: Add Shared Memory Manager driver
The Shared Memory Manager driver implements an interface for allocating
and accessing items in the memory area shared among all of the
processors in a Qualcomm platform.

Adapted from the Linux driver (4.17)

Changes from the original Linux driver:
* Removed HW spinlock mechanism, which is irrelevant
in U-boot particualar use case, which is just reading from the smem.
* Adapted from Linux driver model to U-Boot's.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-19 16:31:37 -04:00
Michal Simek
0d832b3221 sysreset: Add support for gpio-restart
The Linux kernel has binding for gpio-restart node.
This patch is adding basic support without supporting any optional
properties.
This driver was tested on Microblaze system where gpio is connected to
SoC reset logic.
Output value is handled via gpios cells values.

In gpio_reboot_request() set_value is writing 1 because
dm_gpio_set_value() is capable to changing it when it is ACTIVE_LOW.
...
	if (desc->flags & GPIOD_ACTIVE_LOW)
		value = !value;
...

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-19 10:49:55 +02:00
Thomas Fitzsimmons
894c3ad27f board: arm: Add support for Broadcom BCM7445
Add support for loading U-Boot on the Broadcom 7445 SoC.  This port
assumes Broadcom's BOLT bootloader is acting as the second stage
bootloader, and U-Boot is acting as the third stage bootloader, loaded
as an ELF program by BOLT.

Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org>
Cc: Stefan Roese <sr@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
2018-07-10 16:55:57 -04:00
Manivannan Sadhasivam
e2a1484c3b MAINTAINERS: Add entries for Actions Semi OWL family
Add myself as the Maintainer for Actions Semi OWL family and its
relevant board, drivers.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2018-07-09 15:25:41 -04:00
Ramon Fried
92a14a4772 MAINTAINERS: update ARM Snapdragon
Replace Mateusz as Maintainer for ARM Snapdragon arch.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
Acked-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
2018-06-18 14:43:11 -04:00
Heinrich Schuchardt
6b03cd107e efi_loader: DocBook comments for boot services
With 'make htmldocs' we can generate a documentation if the function
comments follow the DocBook conventions.

This patch adjusts the comments for EFI boot services and provides the
DocBook template for the EFI subsystem.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03 15:27:21 +02:00
Tom Rini
c90c43cda8 Merge tag 'arc-updates-for-2018.07-rc1' of git://git.denx.de/u-boot-arc
Here we do a couple of minor fixes like:
 - Move .ivt section to the very beginning of the image
   by default which allows us to use that image put right
   at reset vector (usually 0x0)

 - Improve relocation fix-up which became required once
   we moved .ivt and understood a problem with existing implementation
   where we relied on a particular placement of sections.
   Now we don't care about placement because we just explicitly
   check for .text and in case of ARCompact .ivt sections

 - Re-implemnt do_reset() such that it calls reset_cpu() which
   could implmented for a particular board

And hte most important part we introduce support for yet another
devboard from Synopsys - EMDK.
2018-05-31 14:17:36 -04:00
Alexey Brodkin
b08b113e93 MAINTAINERS: Add board/synopsys/
As of today 'board/synopsys/' folder contains only Synopsys ARC
boards supported by the same people who support 'arch/arc'.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-05-31 19:25:19 +03:00
Ken Ma
592b4a7e97 ata: mvebu: move mvebu sata driver to drivers/ata directory
Currently mvebu sata driver is in arch/arm/mach_mvebu directory, this
patch moves it to drivers/ata directory with renaming "sata.c" to
"ahci_mvebu.c" which is aligned to Linux.
New ahci driver's kconfig option is added as AHCI_MVEBU which selects
SCSI_AHCI and is based on AHCI.

Signed-off-by: Ken Ma <make@marvell.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-29 08:33:05 +02:00
Patrick Delaunay
c3600e1f92 stm32mp1: add FUSE command support
Add support of fuse command (read/write/program/sense)
on bank 0 to access to BSEC SAFMEM (4096 OTP bits).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-26 18:19:18 -04:00
Michal Simek
1d6c54ecb3 arm: zynqmp: Add ZynqMP minimal R5 support
Xilinx ZynqMP also contains dual Cortex R5 which can run U-Boot.
This patch is adding minimal support to get U-Boot boot.
U-Boot on R5 runs out of DDR with default configuration that's why
DDR needs to be partitioned if there is something else running on arm64.
Console is done via Cadence uart driver and the first Cadence Triple
Timer Counter is used for time.

This configuration with uart1 was tested on zcu100-revC.

U-Boot 2018.05-rc2-00021-gd058a08d907d (Apr 18 2018 - 14:11:27 +0200)

Model: Xilinx ZynqMP R5
DRAM:  512 MiB
WARNING: Caches not enabled
MMC:
In:    serial@ff010000
Out:   serial@ff010000
Err:   serial@ff010000
Net:   Net Initialization Skipped
No ethernet found.
ZynqMP r5>

There are two ways how to run this on ZynqMP.
1. Run from ZynqMP arm64
tftpb 20000000 u-boot-r5.elf
setenv autostart no && bootelf -p 20000000
cpu 4 disable && cpu 4 release 10000000 lockstep
or
cpu 4 disable && cpu 4 release 10000000 split

2. Load via jtag when directly to R5

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11 09:38:23 +02:00
Alexander Graf
b123aff26f MAINTAINERS: Declare tools/zynqmp* as Xilinx maintained
The zynqmpimage.c and the new zynqmpbif.c files are all maintained by
Xilinx for the Zynq platforms. Let's match them accordingly
in the MAINTAINERS file.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11 09:23:43 +02:00
Michal Simek
6de7a5b907 MAINTAINERS: zynqmp: Point to proper zynqmp folder
Point to Zynqmp arm64 cpu folder not to Zynq arm32.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11 09:23:43 +02:00
Michal Simek
72c37d1221 timer: Add Cadence TTC timer counter support
This driver was tested on Xilinx ZynqMP SoC.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11 09:23:43 +02:00
Fabio Estevam
08ae21af96 MAINTAINERS: Switch nxp.com domain
freescale.com domain is no longer reachable, so switch the
maintainers' emails to nxp.com domain instead.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-05-01 22:38:10 -04:00
Eugeniy Paltsev
4006200d49 ARC: Update ARC architecture maintainers
Update ARC architecture maintainers and add
uboot-snps-arc@synopsys.com mailing list.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-04-17 20:52:17 +03:00
Heinrich Schuchardt
b57aaa07f2 MAINTAINERS: ARM STM STM32MP: correct file paths
Provide correct file paths.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-04-10 15:19:14 -04:00
Tom Rini
2600df4f8e Xilinx changes for v2018.05-rc2
- Various DT changes and sync with mainline kernel
 - Various defconfig updates
 - Add SPL init for zcu102 revA
 - Add new zynqmp boards zcu100/zcu104/zcu106/zcu111/zc12XX
   and zc1751-dc3
 - Net fixes - xlnx,phy-type
 - 64bit axi ethernet support
 - arasan: Fix nand write issue
 - fpga fixes
 - Maintainer file updates
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlrLeoUACgkQykllyylKDCEilwCgmdalBG7zVd9oekK142ILPdRf
 OgsAn2oWw69JhU3i4mv039lNgYpIzlRb
 =shae
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2018.05-rc2' of git://git.denx.de/u-boot-microblaze

Xilinx changes for v2018.05-rc2

- Various DT changes and sync with mainline kernel
- Various defconfig updates
- Add SPL init for zcu102 revA
- Add new zynqmp boards zcu100/zcu104/zcu106/zcu111/zc12XX
  and zc1751-dc3
- Net fixes - xlnx,phy-type
- 64bit axi ethernet support
- arasan: Fix nand write issue
- fpga fixes
- Maintainer file updates
2018-04-09 11:06:21 -04:00
Heinrich Schuchardt
23e7e6b6b9 MAINTAINERS: ZYNQMP: correct entries
Replace references to non-existent file.

Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 08:02:50 +02:00
Michal Simek
3d14228f1b MAINTAINERS: Fix zynqmp clock driver path
Fix c&p error from Zynq.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09 08:02:50 +02:00
Heinrich Schuchardt
1914e5b5d8 efi_loader: provide new doc/README.uefi
Provides information about

- usage of the bootefi command
- overview of UEFI
- interaction between U-Boot and EFI drivers

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-04 11:00:06 +02:00
Philipp Tomsich
47b8583f58 rockchip: mmc: update MAINTAINERS
The Rockchip-specific wrappers to the DW-MMC and the SDHCI driver
were not covered as part of what's maintained by the architecture
maintainers.  Add them here.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-28 23:47:07 +02:00
Michal Simek
8ae3d0b50c MAINTAINERS: Fix Zynq/ZynqMP and Microblaze fragments
Fix my fragments to list all files in the repo.

Also fix path to for Xilinx Zynq SoC (mach-zynq)
It should be the part of
"ARM: zynq: move SoC sources to mach-zynq"
(sha1: 0107f24036)

And cover dts files in board MAINTAINERS files.

Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23 09:36:15 +01:00
Stefan Roese
5cf32518ea MAINTAINERS: Remove unused ppc4xx entry
ppc4xx support was removed some time ago. Lets remove the now unused
entry in MAINTAINERS as well.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-19 16:14:23 -04:00
Patrick Delaunay
a6151916cb clk: add driver for stm32mp1
add RCC clock driver for STMP32MP157
- base on driver model = UCLASS_CLK
- support ops to enable, disable and get rate
  of all SOC clock needed by U-Boot

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19 16:14:22 -04:00
Patrick Delaunay
e70f70aa65 ram: stm32mp1: add driver
Add driver and binding for stm32mp1 ddr controller and phy

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19 16:14:21 -04:00
Patrick Delaunay
2514c2d0e6 arm: stm32: add new architecture for STM32MP family
- add new arch stm32mp for STM32 MPU/Soc based on Cortex A
- support for stm32mp157 SOC
- SPL is used as first boot stage loader
- using driver model for all the drivers, even in SPL
- all security feature are deactivated (ETZC and TZC)
- reused STM32 MCU drivers when it is possible

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19 16:14:21 -04:00
Heinrich Schuchardt
02c5e891a3 MAINTAINERS: TI SYSTEM SECURITY: remove invalid file
Remove a link to a non-existent file.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Andrew F. Davis <afd@ti.com>
2018-03-16 14:54:14 -04:00
Heinrich Schuchardt
c133915eb2 MAINTAINERS: ARM TI: remove invalid paths
Remove non-existing paths.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-16 14:54:14 -04:00
Heinrich Schuchardt
cbc4423e87 MAINTAINERS: ARM SAMSUNG: remove invalid paths
Remove non-existing directories.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Minkyu Kang <mk7.kang@samsung.com>
2018-03-16 14:54:14 -04:00
Heinrich Schuchardt
18fa6230ce MAINTAINERS: FLATTENED DEVICE TREE: correct maintained path
Change due to commit b08c8c4870 ("libfdt: move headers to
<linux/libfdt.h> and <linux/libfdt_env.h>")

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-16 14:54:14 -04:00
Heinrich Schuchardt
0f8525f5c1 MAINTAINERS: ARM HISILICON: correct maintained path
Fix an incorrect path.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-16 14:54:14 -04:00
Heinrich Schuchardt
f7b2849a47 MAINTAINERS: ARM FREESCALE IMX: remove invalid path
arch/arm/cpu/armv7/mx*/ does not relate to any existing directory.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-03-16 14:54:14 -04:00
Madan Srinivas
f274f26566 defconfig: k2l_hs_evm: Add k2l_hs_evm_defconfig
Adds a dedicated defconfig to build TI K2L secure
devices and updates MAINTAINERS.

k2l_hs_evm_defconfig is created from the k2l_evm_defconfig
and removes support for SPL, as SPL is not supported on K2
HS devices. Corrects SYS_TEXT_BASE for HS devices.

Also adds TI_SECURE_DEVICE and FIT_IMAGE_POST_PROCESS to
include support for secure image creation and authentication

Signed-off-by: Madan Srinivas <madans@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Andrew F. Davis <afd@ti.com>
2018-03-16 09:42:41 -04:00
Heinrich Schuchardt
b7d6e0abab MAINTAINERS: bring sections into alphabetic order
NETWORK should be after NAND_FLASH.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-09 12:31:07 -05:00
Heinrich Schuchardt
4ef17f9cbe MAINTAINERS: bring sections into alphabetic order
POWER should be after ONENAND

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-05 10:16:30 -05:00
Philipp Tomsich
3f56552227 rockchip: video: update MAINTAINERS
The video drivers (VOP, HDMI encoder, LVDS encoder, MIPI encoder) for
Rockchip SOCs are self-contained and are mainly impacted by other
changes in the architecture support (e.g. pinctrl, clocking, etc).

Let's add these to the list of files maintained as part of the
Rockchip port.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2018-02-23 20:49:07 +01:00
Heinrich Schuchardt
f3b5056c4e efi_loader: split README.efi into two separate documents
README.efi describes two different concepts:
* U-Boot exposing the UEFI API
* U-Boot running on top of UEFI.

This patch splits the document in two.
Religious references are removed.

The separation of the concepts makes sense before detailing the internals
of U-Boot exposing the UEFI API in a future patch.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-02-10 00:24:00 +01:00
Heinrich Schuchardt
268ec6e00e efi_loader: fix building crt0 on arm
Before the patch an undefined constant EFI_SUBSYSTEM was used in the
crt0 code. The current version of binutils does not swallow the error.

https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=888403

The necessary constant IMAGE_SUBSYSTEM_EFI_APPLICATION is already
defined in pe.h. So let's factor out asm-generic/pe.h for the
image subsystem constants and use it in our assembler code.

IMAGE_SUBSYSTEM_SAL_RUNTIME_DRIVER does not exist in the specification
let's use IMAGE_SUBSYSTEM_EFI_ROM instead.

The include pe.h is only used in code maintained by Alex so let him be the
maintainer here too.

Reported-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Tested-by: Vagrant Cascadian <vagrant@debian.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-02-10 00:24:00 +01:00
Maxime Ripard
bf8f4c4400 MAINTAINERS: Update email address for Maxime Ripard
Free Electrons is no more and is now known as Bootlin, change my email
address accordingly.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-02-04 19:21:00 -05:00
Heinrich Schuchardt
29a8a2828e efi_loader: add a README.iscsi describing booting via iSCSI
The appended README explains how U-Boot and iPXE can be used
to boot a diskless system from an iSCSI SAN.

The maintainer for README.efi and README.iscsi is set.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
[agraf: s/Adress/Address/]
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-28 21:37:13 +01:00
Alexander Graf
6001985f92 bcm2835_pl011_serial: Add BCM2835 specific serial driver
On bcm2835 we need to ensure we only access serial devices that are
muxed to the serial output pins of the pin header. To achieve this
for the pl011 device, add a bcm2835 specific pl011 wrapper device
that does this check but otherwise behaves like a pl011 device.

Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-28 12:27:36 -05:00
Alexander Graf
958d55f26c MAINTAINERS: Take over BCM2835 maintainership
It seems as if I have more interest in BCM2835 support than most others,
so I'll bite the bullet and declare myself maintainer. It'd be a shame
to leave that platform orphaned.

Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-28 12:27:36 -05:00
Alexander Graf
c8a73a26d6 mmc: Add bcm2835 sdhost controller
The BCM2835 family of SoCs has 2 different SD controllers: One based on
the SDHCI spec and a custom, home-grown one.

This patch implements a driver for the latter based on the Linux driver.
This is needed so that we can make use of device trees that assume driver
presence of both SD controllers.

Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-28 12:27:32 -05:00
Alexander Graf
caf2233b28 bcm283x: Add pinctrl driver
The bcm283x family of SoCs have a GPIO controller that also acts as
pinctrl controller.

This patch introduces a new pinctrl driver that can actually properly mux
devices into their device tree defined pin states and is now the primary
owner of the gpio device. The previous GPIO driver gets moved into a
subdevice of the pinctrl driver, bound to the same OF node.

That way whenever a device asks for pinctrl support, it gets it
automatically from the pinctrl driver and GPIO support is still available
in the normal command line phase.

Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-28 12:27:32 -05:00
Heinrich Schuchardt
ac02019616 tools: provide a tool to convert a binary file to an include
For testing EFI disk management we need an in-memory image of
a disk.

The tool file2include converts a file to a C include. The file
is separated into strings of 8 bytes. Only the non-zero strings
are written to the include. The output format has been designed
to maintain readability.

 #define EFI_ST_DISK_IMG { 0x00010000, { \
  {0x000001b8, "\x94\x37\x69\xfc\x00\x00\x00\x00"}, /* .7i..... */ \
  {0x000001c0, "\x02\x00\x83\x02\x02\x00\x01\x00"}, /* ........ */ \
  {0x000001c8, "\x00\x00\x7f\x00\x00\x00\x00\x00"}, /* ........ */ \
  {0x000001f8, "\x00\x00\x00\x00\x00\x00\x55\xaa"}, /* ......U. */ \
 ...
  {0x00006000, "\x48\x65\x6c\x6c\x6f\x20\x77\x6f"}, /* Hello wo */ \
  {0x00006008, "\x72\x6c\x64\x21\x0a\x00\x00\x00"}, /* rld!.... */ \
  {0, NULL} } }

As the disk image needed for testing contains mostly zeroes a high
compression ratio can be attained.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22 23:09:12 +01:00
Heinrich Schuchardt
bc0bd77ed4 MAINTAINERS: correct entry for lib/efi*/
lib/efi* indicates files efi* in directory lib.
lib/efi*/ indicates all files in directories lib/efi*.

Fixes: 623b3a5797 efi_selftest: provide an EFI selftest application
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2018-01-22 23:09:12 +01:00
Rick Chen
f94c44e51e riscv: Add Kconfig to support RISC-V
Add Kconfig and makefile for RISC-V
Also modify MAINTAINERS for it.

Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Signed-off-by: Greentime Hu <green.hu@gmail.com>
Cc: Padmarao Begari <Padmarao.Begari@microsemi.com>
2018-01-12 08:05:12 -05:00
Eddie Cai
1c977772a6 rockchip:usb: add a simple readme for rockusb
add a simple readme to introduce rockusb and tell people how to use it

Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-10 11:11:06 +01:00
Eddie Cai
453c95e01a usb: rockchip: add rockusb command
this patch add rockusb command. the usage is
rockusb <USB_controller> <devtype> <dev[:part]>
e.g. rockusb 0 mmc 0

Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-10 11:11:06 +01:00
Eddie Cai
bf2b72bef1 usb: rockchip: add the rockusb gadget
this patch implement rockusb protocol on the device side. this is based on
USB download gadget infrastructure. the rockusb function implements the rd,
wl, rid commands. it can work with rkdeveloptool

Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-10 11:11:05 +01:00
Eugeniy Paltsev
e80dac0ab8 ARC: clk: introduce HSDK CGU clock driver
Synopsys HSDK clock controller generates and supplies clocks to various
controllers and peripherals within the SoC.

Each clock has assigned identifier and client device tree nodes can use
this identifier to specify the clock which they consume. All available
clocks are defined as preprocessor macros in the
dt-bindings/clock/snps,hsdk-cgu.h header and can be used in device
tree sources.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2017-12-11 11:36:23 +03:00
Simon Glass
20faa27c2b log: test: Add a pytest for logging
Add a test which tries out various filters and options to make sure that
logging works as expected.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-07 15:17:00 -05:00
Simon Glass
ef11ed8239 log: Add a test command
Add a command which exercises the logging system.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-07 15:17:00 -05:00
Simon Glass
e9c8d49d54 log: Add an implementation of logging
Add the logging header file and implementation with some configuration
options to control it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-12-07 15:17:00 -05:00
Philipp Tomsich
8b45193a22 MAINTAINERS: update maintained files for Rockchip
With some of the recent cleanups (e.g. moving the DRAM controller
drivers for Rockchip devices to drivers/ram/rockchip), the files
and paths listed in MAINTAINERS no longer covered what really is
looked after as part of the Rockchip port.

This commit updates the files/paths listed in MAINTAINERS for the
Rockchip port.  I am certain, though, that this will have missed some
additional paths that should have been included...

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-30 22:55:26 +01:00
Marek Vasut
9db60e257b MAINTAINERS: Add myself as RCar/RMobile comaintainer
To help out with the RCar/RMobile upstreaming, I'm adding myself
as the RCar/RMobile maintainer.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-11-30 02:32:33 +01:00
Bin Meng
c0c5f910ad MAINTAINERS: Update maintainer for USB xHCI
As discussed with Marek, this adds myself as the maintainer to
offload the USB xHCI part.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-11-26 02:22:36 +01:00
Eugeniy Paltsev
3194c3cddf ARC: HSDK: introduce CREG GPIO driver
The HSDK can manage some pins via CREG registers block.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2017-11-24 19:37:56 +03:00
Tom Rini
958046fc78 Patch queue for efi - 2017-10-01
Lots of new things this time. High level highlights are:
 
   - Shim support (to boot Fedora)
   - Initial set of unit tests
   - Preparations to support UEFI Shell
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJZ0KdpAAoJECszeR4D/txga+AQAL8ehBlkr3R6b/n00p3kuAVE
 cfM+o/16b+P/r3U2/wvlNtw7L+UPlGaQNk8o7n4xTu0DpVlIt7DhFrSBIcK6VbYB
 8BFJ/EL9NRj/sd/wb9B1Bc0SlXJcGxzRM+JxNseVmc7rz9sWdARvx/diQlP+YAX4
 qjp2YRzsErjUgix4eGDXvgFQdFmh4Pnp7UnHlSq4WkINo14navGLe/PwChxsL91M
 AZV7JulVcm7XtOPTON8udec3O15O8BExAM1cH2ITjtD99Je+4VcuI99nLm2aIE++
 U6vTuoogHAU+oCutD3qZU85uj2VJ2kYy2k5A/RK/i6Ug/QrTa+JA8PNWP78/TZ+8
 xmyDVzG5MQhMIddDjJlMXbxIwgKhr0SjUJ1iVaGI0bS/6Glc7h9m+hhIXKudqOvs
 lxqPhy7mahtBwETjoUlM1WJg+TG+vIGDJtT22njjOSTh0CVYw2H3xihyFKE3AjaW
 L26EOEsxArErtzF17GgF5KxFOGaYAmVmA3XnCcEZEIY5gzL65uok1GX/apf4sIsi
 j8HSbW3UH6QwjWKBhF+RVuK4CcTDUS9K2YmJlrdZ69elDZyg5PWbpMLNdYIP+VVG
 +j91c7e3O2q2AHAzTprpmkyeIeqZfFhgyu4H/jPQ8Yi8N/b7wbugcLm3fHuUNal4
 RB0KjbyJzJPQwbYGSLYi
 =9HkH
 -----END PGP SIGNATURE-----

Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot

Patch queue for efi - 2017-10-01

Lots of new things this time. High level highlights are:

  - Shim support (to boot Fedora)
  - Initial set of unit tests
  - Preparations to support UEFI Shell
2017-10-01 08:48:38 -04:00
Andrew F. Davis
c2dca3374a defconfigs: Add a config for AM335x High Security EVM with UART Boot support
Add a new defconfig file for the AM335x High Security EVM. This config
is specific for the case of UART booting

Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-09-29 14:07:55 -04:00
Heinrich Schuchardt
623b3a5797 efi_selftest: provide an EFI selftest application
A testing framework for the EFI API is provided.
It can be executed with the 'bootefi selftest' command.

It is coded in a way that at a later stage we may turn it
into a standalone EFI application. The current build system
does not allow this yet.

All tests use a driver model and are run in three phases:
setup, execute, teardown.

A test may be setup and executed at boottime,
it may be setup at boottime and executed at runtime,
or it may be setup and executed at runtime.

After executing all tests the system is reset.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-18 23:53:57 +02:00
Anatolij Gustschin
c967fb78e4 MAINTAINERS: add lcd files to video section
LCD drivers are video related, so add them to video section.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2017-09-05 11:17:31 +02:00
Bin Meng
dc5210a20d MAINTAINERS: Update maintainer for x86
This adds myself as one of the x86 maintainers.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-26 11:29:16 -04:00
Christophe Leroy
72281c5c46 powerpc: Remove 8260 remainders
commit 2eb48ff7a2 ("powerpc, 8260: remove support for mpc8260")
removed support for 8260 CPU.

This patch remove some remainders.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-23 09:24:47 -04:00
Stefano Babic
552a848e4f imx: reorganize IMX code as other SOCs
Change is consistent with other SOCs and it is in preparation
for adding SOMs. SOC's related files are moved from cpu/ to
mach-imx/<SOC>.

This change is also coherent with the structure in kernel.

Signed-off-by: Stefano Babic <sbabic@denx.de>

CC: Fabio Estevam <fabio.estevam@nxp.com>
CC: Akshay Bhat <akshaybhat@timesys.com>
CC: Ken Lin <Ken.Lin@advantech.com.tw>
CC: Marek Vasut <marek.vasut@gmail.com>
CC: Heiko Schocher <hs@denx.de>
CC: "Sébastien Szymanski" <sebastien.szymanski@armadeus.com>
CC: Christian Gmeiner <christian.gmeiner@gmail.com>
CC: Stefan Roese <sr@denx.de>
CC: Patrick Bruenn <p.bruenn@beckhoff.com>
CC: Troy Kisky <troy.kisky@boundarydevices.com>
CC: Nikita Kiryanov <nikita@compulab.co.il>
CC: Otavio Salvador <otavio@ossystems.com.br>
CC: "Eric Bénard" <eric@eukrea.com>
CC: Jagan Teki <jagan@amarulasolutions.com>
CC: Ye Li <ye.li@nxp.com>
CC: Peng Fan <peng.fan@nxp.com>
CC: Adrian Alonso <adrian.alonso@nxp.com>
CC: Alison Wang <b18965@freescale.com>
CC: Tim Harvey <tharvey@gateworks.com>
CC: Martin Donnelly <martin.donnelly@ge.com>
CC: Marcin Niestroj <m.niestroj@grinn-global.com>
CC: Lukasz Majewski <lukma@denx.de>
CC: Adam Ford <aford173@gmail.com>
CC: "Albert ARIBAUD (3ADEV)" <albert.aribaud@3adev.fr>
CC: Boris Brezillon <boris.brezillon@free-electrons.com>
CC: Soeren Moch <smoch@web.de>
CC: Richard Hu <richard.hu@technexion.com>
CC: Wig Cheng <wig.cheng@technexion.com>
CC: Vanessa Maegima <vanessa.maegima@nxp.com>
CC: Max Krummenacher <max.krummenacher@toradex.com>
CC: Stefan Agner <stefan.agner@toradex.com>
CC: Markus Niebel <Markus.Niebel@tq-group.com>
CC: Breno Lima <breno.lima@nxp.com>
CC: Francesco Montefoschi <francesco.montefoschi@udoo.org>
CC: Jaehoon Chung <jh80.chung@samsung.com>
CC: Scott Wood <oss@buserror.net>
CC: Joe Hershberger <joe.hershberger@ni.com>
CC: Anatolij Gustschin <agust@denx.de>
CC: Simon Glass <sjg@chromium.org>
CC: "Andrew F. Davis" <afd@ti.com>
CC: "Łukasz Majewski" <l.majewski@samsung.com>
CC: Patrice Chotard <patrice.chotard@st.com>
CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Hans de Goede <hdegoede@redhat.com>
CC: Masahiro Yamada <yamada.masahiro@socionext.com>
CC: Stephen Warren <swarren@nvidia.com>
CC: Andre Przywara <andre.przywara@arm.com>
CC: "Álvaro Fernández Rojas" <noltari@gmail.com>
CC: York Sun <york.sun@nxp.com>
CC: Xiaoliang Yang <xiaoliang.yang@nxp.com>
CC: Chen-Yu Tsai <wens@csie.org>
CC: George McCollister <george.mccollister@gmail.com>
CC: Sven Ebenfeld <sven.ebenfeld@gmail.com>
CC: Filip Brozovic <fbrozovic@gmail.com>
CC: Petr Kulhavy <brain@jikos.cz>
CC: Eric Nelson <eric@nelint.com>
CC: Bai Ping <ping.bai@nxp.com>
CC: Anson Huang <Anson.Huang@nxp.com>
CC: Sanchayan Maity <maitysanchayan@gmail.com>
CC: Lokesh Vutla <lokeshvutla@ti.com>
CC: Patrick Delaunay <patrick.delaunay@st.com>
CC: Gary Bisson <gary.bisson@boundarydevices.com>
CC: Alexander Graf <agraf@suse.de>
CC: u-boot@lists.denx.de
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2017-07-12 10:17:44 +02:00
Stephen Warren
8b7d092454 MAINTAINERS: drop bcm283x/rpi maintainership
It's been a while since I've touched U-Boot on the Raspberry Pi and
other things have been taking my time. Drop my maintainership for this
port.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2017-07-08 20:43:05 -04:00
Christophe Leroy
907208c452 powerpc: Partialy restore core of mpc8xx
CS Systemes d'Information (CSSI) manufactures 8xx boards for
critical communication systems. Those boards have been
running U-Boot since 2010 and will have to be maintained
until at least 2027.

commit 5b8e76c35e
("powerpc, 8xx: remove support for 8xx") orphaned those boards
by removing support for the mpc8xx CPU.

This commit partially restores support for the 8xx, with the
following limitations:
- Restores support for MPC866 and MPC885 only
- Does not restore IDE, PCMCIA, I2C, USB
- Does not restore examples
- Does not restore POST
- Does not restore Ethernet on SCC
- Does not restore console on SCC
- Does not restore bedbug and kgdb support

As the 866 and 885 do not support the following features,
they are not restored either:
- VIDEO / LCD
- RTC clock

The CPM uCODE patch is not restored either, because:
- 866 and 885 already have support for I2C and SPI relocation
without a uCODE patch
- relocation of SMC, I2C or SPI is only needed for using SCCs
for Ethernet or QMC

The dynamic setup/calculation of clocks is removed, we
expect the target being use with the clock and PLPRCR register
defined in the configuration.
All the clock settings for 8xx prior to 866 is removed as
well as we now only support 866 and 885.

This code is mature and addresses mature boards. Therefore
all code enclosed in '#if 0/#endif' and '#if XX_DEBUG/#endif'
is unneeded.

The following files are not restored by this patch:

- arch/powerpc/cpu/mpc8xx/bedbug_860.c
- arch/powerpc/cpu/mpc8xx/fec.h
- arch/powerpc/cpu/mpc8xx/kgdb.S
- arch/powerpc/cpu/mpc8xx/plprcr_write.S
- arch/powerpc/cpu/mpc8xx/scc.c
- arch/powerpc/cpu/mpc8xx/upatch.c
- arch/powerpc/cpu/mpc8xx/video.c
- arch/powerpc/include/asm/status_led.h
- arch/powerpc/lib/ide.c
- arch/powerpc/lib/ide.h
- doc/README.MPC866
- drivers/pcmcia/mpc8xx_pcmcia.c
- drivers/rtc/mpc8xx.c
- drivers/usb/gadget/mpc8xx_udc.c
- drivers/video/mpc8xx_lcd.c
- examples/standalone/test_burst.c
- examples/standalone/test_burst.h
- examples/standalone/test_burst_lib.S
- examples/standalone/timer.c
- include/mpc823_lcd.h
- include/usb/mpc8xx_udc.h
- post/cpu/mpc8xx/Makefile
- post/cpu/mpc8xx/cache.c
- post/cpu/mpc8xx/cache_8xx.S
- post/cpu/mpc8xx/ether.c
- post/cpu/mpc8xx/spr.c
- post/cpu/mpc8xx/uart.c
- post/cpu/mpc8xx/usb.c
- post/cpu/mpc8xx/watchdog.c

Some of the restored files are not located in a proper location.
In order to keep traceability of the changes, they will be
moved to their correct location and moved to Kconfig in a
followup patch.

This patch also declares CSSI as point of contact for the update
of the 8xx platform, as those boards are the only ones still
being maintained on the 8xx area. A later patch will add
those boards to the tree.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-08 15:55:26 -04:00
Andy Shevchenko
daab59ac05 avr32: Retire AVR32 for good
AVR32 is gone. It's already more than two years for no support in Buildroot,
even longer there is no support in GCC (last version is heavily patched 4.2.4).

Linux kernel v4.12 got rid of it (and v4.11 didn't build successfully).

There is no good point to keep this support in U-Boot either.

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-07-06 16:17:19 -04:00
Alexander Graf
bc188a30c6 efi_loader: Add efi-next git tree to MAINTAINERS file
The efi-next tree lives on github, not the usual denx git.
Reflect this in the MAINTAINERS file so that people can
find it.

Signed-off-by: Alexander Graf <agraf@suse.de>
2017-07-04 09:01:23 +02:00
Philipp Tomsich
f8714372ed MAINTAINERS, git-mailrc: update the maintainer for rockchip
Adding myself to MAINTAINERS and git-mailrc for the rockchip
sub-architecture.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Simon Glass <sjg@chromium.org>
2017-06-23 10:38:09 -04:00
Fabio Estevam
2aaf7c4900 MAINTAINERS: Add myself as i.MX co-maintainer
I would like to help Stefano Babic as a co-maintainer of
U-Boot i.MX.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2017-06-21 07:57:02 -04:00
Heiko Schocher
064b55cfcb powerpc, 5xxx, 512x: remove support for mpc5xxx and mpc512x
There was for long time no activity in the mpx5xxx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in mpc5xxx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-16 10:14:55 -04:00
mario.six@gdsys.cc
e5ed4c3e83 MAINTAINERS: mpc83xx: Add new custodian
Add myself as mpc83xx custodian.
2017-06-12 08:38:45 -04:00
Kever Yang
ae0fc89e8f MAINTAINERS: rockchip: add board/rockchip as maintained entry
Directory board/rockchip/ are all boards for Rockchip SoCs,
so add it to maintained entry.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-07 07:29:22 -06:00
Lokesh Vutla
8a707bafe0 MAINTAINERS: Update for Keystone2 secure devices
Update Keystone2 secure device configs under
"TI SYSTEM SECURITY". Without this buildman keeps complaining
about the status of these boards.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Andrew F. Davis <afd@ti.com>
2017-04-27 16:49:08 -04:00
Tom Rini
1622559066 Merge branch 'master' of git://www.denx.de/git/u-boot-imx
Drop CONFIG_STACKSIZE from include/configs/imx6_logic.h

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-13 11:19:00 -04:00
Jagan Teki
fbe62a6757 MAINTAINERS: Fix ARM FREESCALE IMX files
- Remove arch/arm/cpu/arm926ejs/imx/ which is not available
- arch/arm/cpu/imx-common/ => arch/arm/imx-common/

Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-04-12 17:51:24 +02:00
Chen-Yu Tsai
ed8f2a286d sunxi: Add boards/sunxi and arch/arm/mach-sunxi to sunxi MAINTAINERS entry
Recently some sunxi related code was moved to arch/arm/mach-sunxi, but
the MAINTAINERS entry was not updated to reflect this. Add this, and
the board level boards/sunxi directory to our entry.

While at it, also update its status, to reflect the current active
maintainership.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-04-07 11:23:46 +05:30
Tom Rini
70cc0c34b6 OpenRISC: Remove
The OpenRISC architecture is currently unmaintained, remove.

Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-05 13:52:34 -04:00
Tom Rini
936478e797 SPARC: Remove
The SPARC architecture is currently unmaintained, remove.

Cc: Francois Retief <fgretief@spaceteq.co.za>
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-05 13:52:20 -04:00
Tom Rini
ea3310e8aa Blackfin: Remove
The architecture is currently unmaintained, remove.

Cc: Benjamin Matthews <mben12@gmail.com>
Cc: Chong Huang <chuang@ucrobotics.com>
Cc: Dimitar Penev <dpn@switchfin.org>
Cc: Haitao Zhang <hzhang@ucrobotics.com>
Cc: I-SYST Micromodule <support@i-syst.com>
Cc: M.Hasewinkel (MHA) <info@ssv-embedded.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Martin Strubel <strubel@section5.ch>
Cc: Peter Meerwald <devel@bct-electronic.com>
Cc: Sonic Zhang <sonic.adi@gmail.com>
Cc: Valentin Yakovenkov <yakovenkov@niistt.ru>
Cc: Wojtek Skulski <info@skutek.com>
Cc: Wojtek Skulski <skulski@pas.rochester.edu>
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-05 13:52:01 -04:00
Patrice Chotard
94e9a4ef91 arm: Add support for STMicroelectronics STiH410 soc
The STiH410 is an advanced multi-HD AVC processor with 3D
graphics acceleration and 1.5-GHz ARM Cortex-A9 SMP CPU
part of the STiH407 family.

It has wide connectivity including USB 3.0, PCI-e, SATA
and gigabit ethernet.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-03-14 20:40:18 -04:00
Andrew F. Davis
a42eee1266 defconfig: Add a config for AM335x High Security EVM
Add a new defconfig file for the AM335x High Security EVM. This config
is specific for the case of memory device booting. Memory device booting
is handled separatly from peripheral booting on HS devices as the load
address changes.

This defconfig is the same as for the non-secure part, except for:
	CONFIG_TI_SECURE_DEVICE option set to 'y'
	CONFIG_ISW_ENTRY_ADDR updated for secure images.
	CONFIG_FIT_IMAGE_POST_PROCESS option set to 'y'
	CONFIG_SPL_FIT_IMAGE_POST_PROCESS option set to 'y'
	CONFIG_USE_TINY_PRINTF option set to 'y' to reduce SPL size
	CONFIG_SPL_SYS_MALLOC_SIMPLE set to 'y' to reduce SPL size

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-01-28 14:04:35 -05:00
Lukasz Majewski
56acf018c1 MAINTAINERS: DFU: Change e-mail address of DFU maintanier
Signed-off-by: Lukasz Majewski <lukma@denx.de>
2017-01-20 15:38:02 -05:00
Andrew F. Davis
4e2fdf4511 MAINTAINERS: Add maintainer for TI security related files
Changes involving High-Security boards should be CC'd for additional
assessment of the security implications.

Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-01-14 16:46:23 -05:00
Jaehoon Chung
6e1cfb099a MAINTAINERS, git-mailrc: update the Power maintainer
Przemyslaw didn't maintain the PMIC anymore.
Update the pmic maintainer from Przeymyslaw to me.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-27 11:24:15 -05:00
Lukasz Majewski
53e8ca2253 MAINTAINERS: DFU: Change e-mail address for DFU maintainer
Despite I leave Samsung by the end of the year, I'm going to maintain DFU
in u-boot.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
2016-12-12 13:03:15 -05:00
Lukasz Majewski
dea6068817 MAINTAINERS: ONENAND: MTD: Mark Samsung's OneNAND as orphaned
Since I leave Samsung by the end of the year, I will not have access to
OneNAND devices anymore.

Hence the custodian position has been marked as "Orphaned".

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
2016-12-12 10:54:37 -05:00
Jagan Teki
f22dede20b MAINTAINERS: Fix ALTERA SOCFPGA Files
Replace arch/arm/cpu/armv7/socfpga/ path with
arch/arm/mach-socfpga/ and removed board file path
since board/altera has different boards with relevant
board maintainers.

Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@openedev.com>
2016-12-06 01:45:58 +01:00
Andreas Färber
643f8d4c07 MAINTAINERS: Fix syntax and update filename for FDT
Let get_maintainers.pl pick up the new cmd/fdt.c.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-11-25 09:48:09 -07:00
Jagan Teki
543bd27353 MAINTAINERS: SUNXI: Update maintainership
Add Jagan and Maxime as Maintainers for SUNXI

Signed-off-by: Jagan Teki <jagan@openedev.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-11-22 09:07:26 -05:00
Hans de Goede
8f7c672ce6 MAINTAINERS: mark sunxi status as Orphan
Ian has not had any time for sunxi for some time now and I'm
in the same situation now, so I'm stepping down as sunxi
custodian and marking the sunxi support as Orphan.

Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-11-14 11:24:44 -05:00
Jagan Teki
16185a85d9 MAINTAINERS: Update Jagan's email
Signed-off-by: Jagan Teki <jagan@openedev.com>
2016-10-29 09:00:01 -04:00
Tom Rini
c98b171e10 Merge branch 'rmobile' of git://git.denx.de/u-boot-sh
[trini: Drop CMD_BOOTI as it's now on by default on ARM64]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-08-20 16:40:34 -04:00
Nobuhiro Iwamatsu
4810c2f80f MAINTAINERS: Add maintainer entry of RMOBILE
Add MAINTAINERS entry.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2016-08-17 10:25:34 +09:00
Chris Zankel
de5e5cea02 xtensa: add support for the xtensa processor architecture [1/2]
The Xtensa processor architecture is a configurable, extensible,
and synthesizable 32-bit RISC processor core provided by Cadence.

This is the first part of the basic architecture port with changes to
common files. The 'arch/xtensa' directory, and boards and additional
drivers will be in separate commits.

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-08-15 18:46:38 -04:00
Jaehoon Chung
dbc39699d0 MAINTAINERS, git-mailrc: Update the mmc maintainer
Update the mmc maintainer from Pantelis to me.

Acked-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2016-08-02 07:30:56 -04:00
Fabio Estevam
77cbd3a141 MAINTAINERS: i.MX: Add board/freescale/*mx* path
Pass the board/freescale/*mx*/ path as files maintained by Stefano
Babic.

While this is not ideal and does not cover all the i.MX board cases,
it gives at least a better hint for the /scripts/get_maintainer.pl
tool.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-07-28 13:27:22 +02:00